共查询到20条相似文献，搜索用时 718 毫秒
1.
本文针对多辐射场源地空瞬变电磁法理论,建立了相应的多分量全域视电阻率定义方法.分析了利用磁场强度进行多辐射场源地空系统全域视电阻率定义的优点,针对磁场强度的各个分量,提出了各自的全域视电阻率算法,实现了多分量、全时域、全空域视电阻率计算,并分析了偏移距对全域视电阻率的影响.通过调整源的相对位置及电流方向等参数,多辐射源瞬变电磁地空系统不仅可以加强不同分量信号强度,削弱随机干扰,还可更好地分辨地下异常体的位置.通过对所设计模型的处理,证实了多辐射场源地空系统多分量全域视电阻率算法的有效性,也验证了多辐射场源地空系统的优势. 相似文献
2.
正交水平磁偶源是模拟天然场源的较好人工源,可以方便地实现可控源高频大地电磁张量测量.正交水平磁偶源的电磁场分布规律是野外工作布置的理论基础,为此计算了均匀大地模型正交水平磁偶源的电磁场.计算结果表明:电磁场水平分量在各个象限都有一相对低值带,对应的标量视电阻率形成了畸变带,但张量视电阻率畸变带消失;张量视电阻率曲线形态显示出近区的低阻、过渡区的高阻隆起和远区趋于真值的规律.通过野外试验验证理论计算结果,在无法准确确定地下介质电阻率参数的情况下,以天然电磁场计算的电阻率为参照对比研究了正交水平磁偶源电磁场的分布规律.试验结果表明:正交水平磁偶源与电偶源的电磁场同样的存在近区、过渡区和远区;在远区,正交水平磁偶源与测点的相对位置对张量测量结果几乎没有影响,即在远区可以在任何方位测量;正交水平磁偶源的布置要考虑收发距的影响,保证测量在远区进行. 相似文献
3.
The study presents a fast imaging technique for the very low‐frequency data interpretation. First, an analytical expression was derived to compute the vertical component of the magnetic field at any point on the Earth's surface for a given current density distribution in a rectangular block on the subsurface. Current density is considered as exponentially decreasing with depth, according to the skin depth rule in a particular block. Subsequently, the vertical component of the magnetic field due to the entire subsurface was computed as the sum of the vertical component of the magnetic field due to an individual block. Since the vertical component of the magnetic field is proportional to the real part of very low‐frequency anomaly, an inversion program was developed for imaging of the subsurface conductors using the real very low‐frequency anomaly in terms of apparent current density distribution in the subsurface. Imaging results from the presented formulation were compared with other imaging techniques in terms of apparent current density and resistivity distribution using a standard numerical forward modelling and inversion technique. Efficacy of the developed approach was demonstrated for the interpretation of synthetic and field very low‐frequency data. The presented imaging technique shows improvement with respect to the filtering approaches in depicting subsurface conductors. Further, results obtained using the presented approach are closer to the results of rigorous resistivity inversion. Since the presented approach uses only the real anomaly, which is not sensitive to very small isolated near‐surface conducting features, it depicts prominent conducting features in the subsurface. 相似文献
4.
David Beamish 《Geophysical Prospecting》2012,60(2):337-360
Source/body edge detection is a common feature in the processing and interpretation of potential field data sets. A wide range of spatial derivatives is available to enhance the information contained in the basic data. Here the ability of these procedures to assist with the mapping interpretation of non‐potential field data is considered. The study uses airborne electromagnetic (conductivity) data but also provides a general context for other conductivity/resistivity data, provided the non‐potential field nature of active and thus spatially‐focused, measurements is acknowledged. The study discusses and demonstrates the application of a range of common spatial derivative procedures, including the analytic signal and upward continuation, to both magnetic and conductivity data. The ability of the tilt derivative to provide enhanced mapping of conductivity data is considered in detail. Tilt and its associated functions are formed by taking combinations of vertical and horizontal derivatives of the data set. Theoretical forward modelling studies are first carried out to assess the performance of the tilt derivative in relation to the detection and definition of concealed conductivity structure. The tilt derivative embodies automatic gain control that normalizes the detection and definition of both weak and strong conductivity gradients across an appropriate subsurface depth range. The use of high‐order spatial derivatives inevitably results in a degree of noise (cultural perturbation) amplification that is survey and technique specific. Both of these aspects are considered using practical case studies of jointly obtained magnetic and conductivity data at a variety of spatial scales. 相似文献
5.
6.
J. DUROUX 《Geophysical Prospecting》1967,15(4):564-583
The electromagnetic field radiated from a magnetic dipole lying on the ground is considered, in the extremely low frequency range (DC to 20 000 Hertz). Theoretical and experimental data are given on the characteristics of the surface wave (vanishing wave) generated at the air-ground interface, in the case of an homogeneous subsurface. The case of a subsurface with electrical resistivity varying with depth is considered. It is shown how the above-mentioned characteristics may be applied in the quantitative investigation of the electrical resistivity of the subsurface as a function of depth, in a method using the measurements on the ground of all the components of the radiated field: horizontal electrical components, vertical and horizontal magnetic components. 相似文献
7.
David Beamish 《Journal of Applied Geophysics》1994,32(4)
Very low frequency electromagnetic (EM) methods using VLF transmitters have found many applications in subsurface geophysical investigations. Surface measurements involving both the vertical component of the magnetic field (VLF-EM or VLF-Z) and of the apparent resistivity (VLF-R) are increasingly common. Although extensive VLF data sets have been successfully used for mapping purposes, modelling and interpretation techniques which asess the third (i.e. depth) dimension appear limited.Given a profile of VLF-R measurements the main purpose of the present study is to demonstrate an automatic method for the construction of a resistivity cross-section. The technique used is one of a new generation of regularised inversion methods. These techniques attempt to overcome the problem of equivalence/non-uniqueness in EM sounding data by constructing the resistivity distribution with the minimum amount of structure that fits the data.VLF data represent a special case of plane-wave EM sounding in that they conform, in practice, to a single-frequency technique. This fact imposes a limitation in the amount of vertical resolution that we can expect using such data. In the case of two-dimensional modelling and inversion, resolution through the cross-section is a resultant attribute from both vertical and lateral resistivity gradients within the subsurface. In order to provide insight into the practical application of regularised inversion techniques to VLF data, both synthetic and field examples are considered. Both sets of examples are primarily concerned with VLF data applied to near-surface fault mapping where the main aim is to assess the location, dip and depth extent of conductive subsurface features. 相似文献
8.
Transient electromagnetic surveys with unimodal transverse magnetic field: ideas and results 
下载免费PDF全文
下载免费PDF全文 Vladimir S. Mogilatov Arkadiy V. Zlobinskiy Boris P. Balashov 《Geophysical Prospecting》2017,65(5):1380-1397
The theory behind transient electromagnetic surveys can be well described in terms of transverse magnetic and transverse electric modes. Soundings using transverse magnetic and transverse electric modes require different source configurations. In this study, we consider an alternating transverse magnetic field excitation by a circular electric dipole. The circular electric dipole transmitter is a horizontal analogue of the vertical electric dipole. Offshore surveys using circular electric dipole might represent an alternative to the conventional marine controlled‐source electromagnetic method at shallow sea and/or for exploring relatively small targets. Field acquisition is carried out by recording either electric or magnetic responses. Electric responses bear information on the 1D structure of a layered earth and successfully resolve high‐resistivity targets in marine surveys. Land‐based circular electric dipole soundings are affected by induced polarisation. On the contrary, magnetic responses are absent on the surface of a 1D earth, and as a result, they are very sensitive to any and even very small 3D conductivity perturbations. In addition, they are sensitive to induced polarisation or some other polarisation effects in the subsurface. At present, circular electric dipole transmitters and magnetic receivers are successfully used in on‐land mineral and petroleum exploration. 相似文献
9.
利用有限元2.5维可控源音频大地电磁法（简称CSAMT）数值模拟方法,对100Ωm均匀半空间介质中有限长度的电偶极源产生的电场、磁场及视电阻率、相位特征进行了数值模拟,研究了场的空间变化规律. 在一个象限中,场的特征存在双叶现象,当收发距大于4个趋肤深度时,电阻率较接近介质真实的电阻率,这些结果为观测系统和收发距的选择提供了依据. 波数域场的特征表明,低波数对源的贡献占较大的比例. 有限元法2.5维CSAMT数值模拟的优势在于能较准确地获得复杂介质结构的波场特征. 本文结合直立异常体、倾斜异常体及断陷模型对CSAMT电阻率、相位剖面特征及频率曲线特征的可靠性进行了研究. 数值模拟结果直观地给出了异常体的剖面异常形态. 通过对比研究异常体的剖面异常形态和半空间场的特征进一步说明本文方法和软件在模拟复杂介质结构场特征时是可靠的. 这为认识观测数据,指导反演解释提供了较好的依据. 相似文献
10.
11.
常规的可控源电磁法理论在计算视电阻率公式上,多半采用其电磁场的渐近特征,难以直接反映全区视电阻率的值,及直观地显现地下介质的地质构造.文中采用水平偶极子激发的电磁场,提出了电场的全区精确表达式,直接计算出大地电阻率.利用汉克尔数值滤波算法和逆样条插值算法对水平层状电磁场进行正演计算,并与计算的卡尼亚视电阻率的对比和野外试验结果表明：该方法的结果在远区等价卡尼亚电阻率,在近区和过渡带则明显地改善了卡尼亚电阻率的非波场区场畸变,从而能更好地接近基底的真电阻率,更形象地反映了地下介质的垂向电性变化. 相似文献
12.
ACTIVE system for monitoring volcanic activity: A case study of the Izu-Oshima Volcano,Central Japan
Hisashi Utada Yuji Takahashi Yuichi Morita Takao Koyama Tsuneomi Kagiyama 《Journal of Volcanology and Geothermal Research》2007
A system is proposed for the monitoring of changes in the underground structure of an active volcano over time by applying a transient electromagnetic method. The monitoring system is named ACTIVE, which stands for Array of Controlled Transient-electromagnetics for Imaging Volcano Edifice. The system consists of a transmitter dipole used to generate a controlled transient electromagnetic (EM) field and an array of receivers used to measure the vertical component of the transient magnetic field at various distances, with automatic operation of both units. In order to verify the performance of the proposed system, numerical and field experiments were carried out by application of the system to the Izu-Oshima volcano, where a remarkable change in the apparent DC resistivity over time had been detected in association with the eruption in 1986. 相似文献
13.
与可控源音频大地电磁（CSAMT）相比,广域电磁法通过采用全区视电阻率定义,突破了卡尼亚视电阻率所需的远区条件限制,极大拓展了可控源电磁观测区域和探测深度.考虑到电偶源激发场的三维特征以及地下复杂三维结构,为提高广域电磁数据解释精度,本文实现了基于二次耦合势的广域电磁法三维正演计算.该算法利用Helmholtz定理将麦克斯韦方程转化为库伦规范下的磁矢势和电标势耦合方程,有效改善了离散所得大型线性方程组的谱性质,并通过强加散度条件来消除电场伪解的影响.此外,采用散射场方法,其中一次场使用准解析法求解,二次场使用有限体积法求解,克服了局部激发场源奇异性问题.通过与一维层状模型下电偶源产生的电磁场准解析解对比,验证了本文算法的正确性.在此基础上,利用本文的正演算法对比分析了广域电磁法与CSAMT对典型三维目标体的探测能力,结果表明在相同的观测条件下,广域电磁法能够更准确地反映地下目标体信息,拥有更优的分辨能力. 相似文献
14.
The many different existing models describing the spectral behaviour of the resistivity of geological materials at low frequency, combined with the lack of available field data, render the interpretation of complex resistivity (CR) data very difficult. With a recent interest in CR‐measurements for environmental applications and thanks to technological progress, the use of wide‐band frequency equipment seems promising, and it is expected to shed light on the different results among the published solutions to the electromagnetic (EM) coupling problem. We review the theory of EM‐coupling over a homogeneous half‐space with CR‐effects and study some aspects of the complex coupling function. We advocate the use of the CR‐based coupling function in the interpretation process, in order to obtain a better understanding of the physical processes involved in CR‐effects. Application of the model to real field data shows systematic good agreement in two simple cases, even over wide ranges of frequencies. Interpretation with a double Cole–Cole model is applied for comparison, and in spite of good fits to the data, large differences are observed in the interpreted low‐frequency dispersion. We conclude that the use of a second Cole–Cole model to describe EM‐coupling may corrupt the interpretation of the low‐frequency dispersion, even when only the normal range of frequencies (<100 Hz) is considered, and that the use of the actual EM‐coupling expression is essential when the goal is a better understanding of interaction between CR‐effects and EM‐coupling. 相似文献
15.
Effects of the sea floor topography on the 1D inversion of time‐domain marine controlled source electromagnetic data 下载免费PDF全文
下载免费PDF全文 Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets. 相似文献
16.
电性源地空瞬变电磁法具有工作效率高、勘探深度大、采集信号信噪比高、适用于地形地质条件复杂地区等优点.但是,到目前为止,由于尚未建立起该方法的解释系统,大大制约了该方法的发展.本文旨在建立起完整的地空电磁探测系统,丰富整个探测系统的理论.本文围绕地空瞬变电磁法全域视电阻率定义、瞬变电磁虚拟波场的克希霍夫偏移成像、逆合成孔径成像方法三个科学问题进行了系统研究.提出了用磁场强度定义全域视电阻率的迭代算法,理论模型试验结果表明计算出的视电阻率曲线首支趋于第一层电阻率,尾支趋于最后一层电阻率,实现了全空域、全时域视电阻率的计算;在先前研究的基础上,实现了适合电性源地空装置的瞬变电磁虚拟波场的克希霍夫偏移成像;采用相关迭加技术,实现孔径内多测点数据合成,将传统的单点处理方式发展成为逐点推移多次覆盖的逆合成孔径处理方法.层状模型试验表明:(1)全域视电阻率能够光滑、完整、渐变地反映出模型的电性信息变化;(2)当改变三层模型中间层电阻率时,全域视电阻率曲线随着参数的改变分异明显,对电性层的识别容易且直观;(3)由于在电阻率计算中同时考虑了接收机高度、偏移距、时间等各参数的影响,全域视电阻率可实现全空域、全时域的视电阻率计算.含水采空区的复杂模型算例表明:(1)根据不同测线的全域视电阻率结果可以看出,在靠近采空区的位置,全域视电阻率断面可以清晰地反映出采空区的空间位置,随着测线离采空区越来越远,采空区异常越来越弱直至消失;(2)波场变换和偏移成像的结果显示存在两个电性差异较大的界面,上界面指示地表,由于空气和大地之间的电性差异较大,故该界面波场信号反映强烈,遍布整个区域,下界面异常信号则主要集中在中部,向外逐渐减弱,指示采空区;(3)逆合成孔径成像结果表明地表界面在合成前后没有变化,而采空区异常合成后范围明显变小,且异常边界清晰,指示的采空区位置与模型吻合很好.本文借助于逆合成孔径雷达成像的基本思想,建立了一套电性源瞬变电磁地空逆合成孔径成像方法.基于反函数思想结合迭代算法提出的电性源地空瞬变电磁法的全域视电阻率定义方法,实现了全空域、全时域的视电阻率计算;借鉴瞬变电磁拟地震偏移成像算法,实现了瞬变场的三维成像;借鉴逆合成孔径雷达的思想,提出电性源瞬变电磁地空逆合成孔径算法,进一步提高了成像的分辨率.采空区模型算例表明相关叠加合成确实具有增强有用信号、提高信噪比、提高分辨率的诸多优点,证实了瞬变电磁地空逆合成孔径成像方法的有效性. 相似文献
17.
A horizontal transmitter loop (vertical magnetic dipole) is used for frequency electromagnetic (FEM) soundings. The frequency ranges from approximately 6 Hz to about 4000 Hz. The vertical and radial magnetic field components are measured for 20 frequencies per decade several hundred meters from the transmitter loop. A very small bandwidth is selected for amplification using a reference signal. An Apple computer is used for data acquisition. A computer program for Marquardt inversion optimizes the parameters for the n-layer case: the resistivities and thicknesses of individual beds and a correction factor for the primary magnetic field. Interpretation of each component individually yields practically the same parameters. Examples from the field are given with interpretation; comparison with dc resistivity measurements is provided. The ratio of vertical/radial magnetic field components vs. frequency can be transformed simply into apparent resistivity vs. apparent depth. This can be done in the field to obtain an estimation of the depth of the layer boundaries. FEM results are compared with Schlumberger d.c. sounding obtained at the same site. 相似文献
18.
A Method to Remove Electromagnetic Coupling from Induced Polarization Data for an "Exponential" Earth Model 总被引：1，自引：0，他引：1
?. ?a?lar 《Pure and Applied Geophysics》2000,157(10):1729-1748
--The electromagnetic (EM) coupling effect in induced polarization (IP) data is an important problem. In many works it has been computed only considering homogeneous or layered earth models with discretely uniform conductivity. In this study, an algorithm has been developed to compute the EM coupling effect in IP data measured on the earth, whose conductivity varies (increases or decreases) exponentially with depth. The EM coupling effects for Percent Frequency Effect (PFE) and phase data are computed for a dipole-dipole array with different separations, however the method can be applied to any electrode array. The results obtained for the cases of increasing and decreasing conductivity as a function of depth indicate that the EM coupling effect strongly depends on the subsurface resistivity and the dipole length. Here an "exponential" earth model is considered to remove EM coupling from the IP data in frequency and phase domain. For this purpose, first, the region of pseudo-section is divided into segments, and within each segment a typical average apparent resistivity („a) curve is constructed. An exponential conductivity model is fitted to average „a data. The conductivity model is then used to compute EM responses. Next the data are corrected for the EM coupling contribution. This decoupling process is applied to field data from a galenite-pyrite mineralization area at the Dolluk site, in western Turkey. The results from the decoupling method developed here are compared with other techniques. 相似文献
19.
THE DISPERSION RELATION, OF EARTH''S ELECTROMAGNETIC RESPONSE FUNCTIONS AND THE JOINT INVERSION OF DATA 下载免费PDF全文
下载免费PDF全文 On the basis of the dispersion relations of MT field, the necessity and applied prospects of the joint inversions using a pair of MT response functions which are correlative with the dispersion relations, are infered. A filter coefficient algorithm is made, with which the corresponding impedance phase data can be estimated using a set of apparent resistivities. The tests for the observed MT data show that when comparing the impedance phase estimated using the dispersion relation with the ob served phase, it can be checked whether the dispersion relation between observed apparent resistivity and phase data is satisfied or not, and that the use of the phase data corrected using the dispersion relation in the joint inversion is advantageous to obtain more confident results. It is shown that joint inversions are more advantageous than single parameter inversions, and that in the most case the joint inversion using the apparent resistivities of impedance real and imaginary parts is more advantageous than the jointinversion using the normal apparent resistivity and impedance phase. The existence of the dipersion relations between the ratio apparent resistivity and corresponding impedance phase of the orthogonal electric and magnetic field horizontal Components in the frequency EM sounding with horizontal electric dipole(FEMS) are discussed, the better effect of the joint inversion using the pair of EM response functions is obtained. The problems on the one-dimensional joint inversion for the MT and FEMS apparent resistivities, for which the observed frequency bands partly overlape each other, are studied. It is shown that this joint inversion is applicable and effective:the joint inversions of the practical data for two kinds of EM methods at two sites give the results well corresponding to the drilling data. The simulated MT inversions for the data of two kinds of EM methods are made, and more confident results also are obtained. 相似文献
20.
本文根据视电阻率定义的原则,以及用不同的场量定义的视电阻率效果不同这一事实,提出一种新的全波视电阻率定义.在全区同时用均匀大地上电磁场的三个分量来分区定义祝电阻率.在远区视电阻率由磁场的水平分量求出,在近区由磁场的垂直分量或其实分量定义,而在过渡区则由电场的水平分量确定.用这种方法定义的视电阻率为电磁响应的单值函数,它随频率变化的曲线显著改善,能直观地反映地层电阻率随深度的变化,数值比较接近地层的真电阻率值,假极值效应明显压低.在计算中用切比雪夫多项式分段拟合均匀大地电磁响应的反函数,并给出一套系数,由此算出的视电阻率误差小于1％. 相似文献