共查询到20条相似文献，搜索用时 718 毫秒
1.
北京八宝山断裂带主要由八宝山内支、外支断裂和黄庄-高丽营断裂组成。根据野外地质资料和室内研究,认为八宝山内支断裂是燕山期的逆掩断层,已不具活动性,而外支断裂是一条规模和断距都不大的正断层,只有黄庄-高丽营断裂才是活动断层,它错断了中更新统黄土。 为了获得更多的有关八宝山断裂带活动性的资料,我们采用Kanaori提出的一种判定断层活动性的新方法,通过扫描电镜观察了八宝山断裂带的6个断层泥样品和4个有关地层中的石英颗粒表面微结构,所得结果与野外宏观地质资料相吻合 相似文献
2.
An Application of Hydraulic Tomography to a Large‐Scale Fractured Granite Site,Mizunami, Japan 
下载免费PDF全文
下载免费PDF全文 Yuanyuan Zha Tian‐Chyi J. Yeh Walter A. Illman Tatsuya Tanaka Patrick Bruines Hironori Onoe Hiromitsu Saegusa Deqiang Mao Shinji Takeuchi Jet‐Chau Wen 《Ground water》2016,54(6):793-804
While hydraulic tomography (HT) is a mature aquifer characterization technology, its applications to characterize hydrogeology of kilometer‐scale fault and fracture zones are rare. This paper sequentially analyzes datasets from two new pumping tests as well as those from two previous pumping tests analyzed by Illman et al. (2009) at a fractured granite site in Mizunami, Japan. Results of this analysis show that datasets from two previous pumping tests at one side of a fault zone as used in the previous study led to inaccurate mapping of fracture and fault zones. Inclusion of the datasets from the two new pumping tests (one of which was conducted on the other side of the fault) yields locations of the fault zone consistent with those based on geological mapping. The new datasets also produce a detailed image of the irregular fault zone, which is not available from geological investigation alone and the previous study. As a result, we conclude that if prior knowledge about geological structures at a field site is considered during the design of HT surveys, valuable non‐redundant datasets about the fracture and fault zones can be collected. Only with these non‐redundant data sets, can HT then be a viable and robust tool for delineating fracture and fault distributions over kilometer scales, even when only a limited number of boreholes are available. In essence, this paper proves that HT is a new tool for geologists, geophysicists, and engineers for mapping large‐scale fracture and fault zone distributions. 相似文献
3.
The boat‐based, mobile mapping system (BoMMS) with a laser scanner allows the derivation of detailed riverine topographical data for fluvial applications. Combined with data acquisition from static terrestrial LiDAR (light detection and range) or mobile terrestrial LiDAR on the ground, boat‐based laser scanning enables a totally new field mapping approach for fluvial studies. The BoMMS approach is an extremely rapid methodology for surveying riverine topography, taking only 85 min to survey a reach approximately 6 km in length. The BoMMS approach also allowed an effective survey angle for deep river banks, which is difficult to achieve with aerial or static terrestrial LiDAR. Further, this paper demonstrates the three‐dimensional mapping of a point‐bar and its detailed morphology. Compared with the BoMMS surface, approximately, 80% and 96% of the terrestrial LiDAR points showed a height deviation of less than 2 cm and 5 cm, respectively, with an overall standard deviation of ± 2·7 cm. This level of accuracy and rapidity of data capture enables the mapping of post‐flood deposition directly after a flood event without an extensive time lag. Additionally, the improved object characterisation may allow for better 3D mapping of the point bar and other riverrine features. However, the shadow effect of the BoMMS survey in point bar mapping should be removed by additional LiDAR data to acquire entire riverine topography. The approach demonstrated allowed a large reach to be surveyed compared with static terrestrial LiDAR and increased the spatial limit of survey towards aerial LiDAR, but it maintains the same or even better temporal resolution as static terrestrial LiDAR. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
4.
EVIDENCES OF THE LATE QUATERNARY ACTIVITY OF THE ANGREN SEGMENT OF THE YARLUNG TSANGPO FAULT ZONE 下载免费PDF全文
下载免费PDF全文 The Yarlung Tsangbo fault zone, one of the most important geological interfaces in the Yarlung Tsangbo suture zone which is a huge geotectonic boundary with nearly east-west-trending in southern Tibet Plateau, has undergone a long-term tectonic evolution. Studying this fault zone can help us understand the development and evolution history of the suture zone and the tectonic mechanism of subduction-collision about the Tibet Plateau, so it has always been a hot topic in the field of geology. Most of existing data suggest that the current tectonic activity in southern Tibet is given priority to the rift system with nearly north-south-trending, and the Yarlung Tsangbo fault zone with nearly east-west-trending has relatively weaker activity since late Quaternary. There are only some evidences of Holocene activity found in the Lulang town section near eastern Himalayan syntaxis, and there are few reports about the reliable geological evidences of late Quaternary activity of the section on the west of Milin County of the fault zone.
Based on image interpretation, field investigation and chronological method, we found several fault profiles along the Yarlung Tsangbo fault zone near the Angren Lake in this study. These profiles reveal that loose fault gouge has been developed on the fault plane which nearly extends to the surface and offsets the loess sediments and its overlying alluvial-proluvial gravels. The loess is characterized by coarser grains, higher content of fine sand and tiny small gravels. The results of the two OSL dating samples collected in the loess are(94.68±6.51)ka and(103.84±5.14)ka respectively, showing that the loess revealed at the Angren site should be the middle-late Pleistocene sand loess distributed on the high-terraces along the Yarlung Tsangpo River. Consequently, the Angren segment of the Yarlung Tsangpo fault zone is active since the late Quaternary. In addition, synchronous left-lateral offsets of a series of small gullies and beheaded gullies can be seen near the profiles along the fault, which are the supporting evidence for the late Quaternary activity of the fault.
However, the segment with obvious geomorphology remains is relatively short, and no evidence of late Quaternary activity have been found in other sections on the west of Milin County of the Yarlung Tsangpo fault zone. Existing data show that, in the southern Tibet, a series of near NS-trending rift systems are strongly active since the late Quaternary, cutting almost all of the near east-west-trending tectonic belts including the Yarlung Tsangpo fault zone. In addition, majority of the earthquakes occurring in southern Tibet are related to the NS-trending rift systems. Tectonic images show that the Angren segment locates between the Shenzha-Dingjie rift and the Dangreyong Lake-Gu Lake rift. These two adjacent rifts are special in the rift system in southern Tibet:Firstly, the two rifts are located in the conversion position of the trend of the whole rift system; Secondly, the size of the two rifts varies significantly between the north side and the south side of the Yarlung Tsangbo fault zone. Thirdly, the Shenzha-Dingjie rift seems to be of right-lateral bending, while the Dangreyong Lake-Gu Lake rift shows left-lateral bending. These characteristics may lead to the fact that the amount of absorption and accommodation of the rift activities in the north side of the Yarlung Tsangbo fault zone is larger than that in the south side during the migration of the plateau materials, leading to the differential movement of the block between the two sides of the fault zone. Therefore, the Yarlung Tsangbo fault zone possesses the accommodating tectonic activity, of course, the intensity of this accommodating activity is limited and relatively weaker, which may be the reason why it is difficult to find large-scale tectonic remains characterizing the late Quaternary activity along the fault zone. The scale of the rift system in southern Tibet is systematically different between the two sides of the Yarlung Tsangbo fault zone, so it cannot be ruled out that there are also weak activities similar to the Angren segment in other sections of the fault zone. 相似文献
5.
The availability of airborne LiDAR data provides a new opportunity to overcome some of the problems associated with traditional, field‐based, geomorphological mapping such as restrictions on access and constraints of time or cost. The combination of airborne LiDAR data and GIS technology facilitates the rapid production of geomorphological maps of floodplain environments; however, unfiltered LiDAR data, which include vegetation and buildings, are currently more suitable for geomorphological mapping than data that have been filtered to remove these features. Classification of LiDAR data according to elevation in a GIS enables the user to identify and delineate geomorphological features in a manner similar to field mapping, but it is necessary to use a range of classification intervals in order to map the various types of feature that occur within a single reach. Comparison of a LiDAR‐derived geomorphological map with an independently produced field geomorphological map showed a high degree of similarity between the results of the two methods, although ground‐truthing is essential in cases where a high degree of accuracy is required. Ground‐truthing of a LiDAR‐derived geomorphological map showed that around 80% of features mapped using both methods were identified from the LiDAR data, suggesting that the method is suitable for applications such as production of base maps for use in field mapping and selection of sites for detailed investigation. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
6.
7.
临潼-长安断裂带晚第四纪以来的活动性 总被引：1，自引：0，他引：1
对临潼-长安断裂带进行了详细的野外调查,以期掌握其最新活动年代和第四纪以来的活动特征。该断裂总体走向NE,以张性垂直运动为主,断面明显错断了黄土中的第1层古土壤S1,说明其晚更新世以来仍在活动,并且北段和中段的活动性比南段强,但是错距大多<2m,滑动速率较小,考虑到临潼-长安断裂带由多条次级断层组成,其整体活动性应该比我们计算得到的局部断层滑动速率大得多。断层错距自上而下成递增趋势,并且根据不同地层年代计算出的滑动速率基本一致,因此该断裂带自中更新世晚期以来极可能以垂向蠕滑活动为主 相似文献
8.
Based on the 1︰50000 active fault geological mapping, combining with high-precision remote imaging, field geological investigation and dating technique, the paper investigates the stratum, topography and faulted landforms of the Huashan Piedmont Fault. Research shows that the Huashan Piedmont Fault can be divided into Lantian to Huaxian section (the west section), Huaxian to Huayin section (the middle section) and Huayin to Lingbao section (the east section) according to the respective different fault activity.
The fault in Lantian to Huaxian section is mainly contacted by loess and bedrock. Bedrock fault plane has already become unsmooth and mirror surfaces or striations can not be seen due to the erosion of running water and wind. 10~20m high fault scarps can be seen ahead of mountain in the north section near Mayu gully and Qiaoyu gully, and we can see Malan loess faulted profiles in some gully walls. In this section terraces are mainly composed of T1 and T2 which formed in the early stage of Holocene and late Pleistocene respectively. Field investigation shows that T1 is continuous and T2 is dislocated across the fault. These indicate that in this section the fault has been active in the late Pleistocene and its activity becomes weaker or no longer active after that.
In the section between Huaxian and Huayin, neotectonics is very obvious, fault triangular facets are clearly visible and fault scarps are in linear distribution. Terrace T1, T2 and T3 develop well on both sides of most gullies. Dating data shows that T1 forms in 2~3ka BP, T2 forms in 6~7ka BP, and T3 forms in 60~70ka BP. All terraces are faulted in this section, combing with average ages and scarp heights of terraces, we calculate the average vertical slip rates during the period of T3 to T2, T2 to T1 and since the formation of T1, which are 0.4mm/a, 1.1mm/a and 1.6mm/a, and among them, 1.1mm/a can roughly represent as the average vertical slip rate since the middle stage of Holocene. Fault has been active several times since the late period of late Pleistocene according to fault profiles, in addition, Tanyu west trench also reveals the dislocation of the culture layer of(0.31~0.27)a BP. 1~2m high scarps of floodplains which formed in(400~600)a BP can be seen at Shidiyu gully and Gouyu gully. In contrast with historical earthquake data, we consider that the faulted culture layer exposed by Tanyu west trench and the scarps of floodplains are the remains of Huanxian MS8½ earthquake.
The fault in Huayin to Lingbao section is also mainly contacted by loess and mountain bedrock. Malan loess faulted profiles can be seen at many river outlets of mountains. Terrace geomorphic feature is similar with that in the west section, T1 is covered by thin incompact Holocene sand loam, and T2 is covered by Malan loess. OSL dating shows that T2 formed in the early to middle stage of late Pleistocene. Field investigation shows that T1 is continuous and T2 is dislocated across the fault. These also indicate that in this section fault was active in the late Pleistocene and its activity becomes weaker or no longer active since Holocene.
According to this study combined with former researches, we incline to the view that the seismogenic structure of Huanxian MS8½ earthquake is the Huashan Piedmont Fault and the Northern Margin Fault of Weinan Loess, as for whether there are other faults or not awaits further study. 相似文献
9.
The geological structure exposed by paleoearthquake trenches is the key material to the right cognition of fault activity and paleoearthquake. However, paleoearthquake trenching inevitably destroys active tectonic geomorphic evidence and trench exposures are usually difficult to reserve. The conventional process of recording the delicate geological information, manually constructing photomosaics by image-editing software, is time-consuming and produces undesirable artificial distortions. Herein, we explored the process of constructing trench orthophotomosaics and the 3D image model using the Image-based Modeling technology and applied it to the Liutiaohe trench across the Tianqiaogou-Huangyangchuan Fault, Gansu Province. Based on the 3D image modeling and orthophotomosaic, we firstly constructed the control points and scale bars on cleaned trench walls and collected photos of all sections of the trench with a digital camera in the field, and then reconstructed the 3D model of the trench through the Agisoft PhotoScan, an efficient image-based modeling software, and finally yielded the 3D image model of the trench and othophotomasaics of the trench exposures. The results show that the automated workflow can produce seamless, sub-millimeter-level high-resolution photomosaics more quickly, with precision in the centimeter range, and the 3D image model is of great help to identify strata and geological structures in trenches with much lower capital and labor costs and low expertise levels compared with LiDAR, meanwhile, the 3D archive benefits the share and communication and even allows future reinterpreting the site using new insights. 相似文献
10.
1654年礼县8级地震的发震区地处新构造活动强烈的青藏高原东北缘,位于南北地震带中北段,发育多条活动断裂。礼县8级地震发生在黄土覆盖区,距今约370年,受自然侵蚀与人类活动的影响,其地表破裂带和次生灾害现在已经难以分辨。为此,文章收集整理了1970年以来的地震台网和流动台网观测资料,基于地震层析成像方法,经过联合反演计算,研究1654年礼县8级地震的发震构造。研究根据岷县—礼县—两当一线的小震活动分布,推测存在"岷县—礼县—两当断裂",可能是1654年礼县8级地震的发震断裂,但仍需野外地质工作的进一步研究。 相似文献
11.
根据详细的野外调查和剖面测绘成果,结合区域第四系测年结果等资料,对龙蟠—乔后断裂带桃源段新发现的桃源断裂、刀郭断裂、合江村断裂及已知的龙蟠—乔后断裂等4条主要断裂的晚第四纪活动特征进行研究。成果表明,龙蟠—乔后断裂带桃源段在晚第四纪的活动特征明显,活动强度中等,龙蟠—乔后断裂和合江村断裂属全新世活动断裂,桃源断裂和刀郭断裂属晚更新世断裂;晚更新世以来,龙蟠—乔后断裂和刀郭断裂以左旋走滑运动为主,而桃源断裂和合江村断裂则表现为正断走滑为主。这些断裂的活动性都不同程度地影响着研究区及附近区域的地震风险和构造稳定性。新的调查研究成果为深入认识龙蟠—乔后断裂带桃源段的晚第四纪活动性提供了新的资料,并可为深入理解该区的地震地质特征以及工程建设地震安全性评价等提供基础地质资料。 相似文献
12.
1830年河北磁县强震区活动构造初步研究 总被引：5，自引：0，他引：5
根据航片判读及野外调查，提出河北磁县存在北西西向全新世隆起，该性起北缘的北西西向南山村断裂带是本区的活动断裂。断裂活动为正倾滑。活动依据有错断山体的基岩陡崖，河床中晚全新世地层的陡坡沉积及沿断裂带展布的线性黄土，碎石楔。该断裂带被认为是１８３０年磁县地震的地震断层。 相似文献
13.
Based on the 1︰50000 geological and geomorphologic mapping of active fault, the structural geomorphic features and activity of Hancheng Fault are investigated in detail. In the study, we divide the fault into three sections from north to south: the section between Xiweikou and Panhe River, the section between Panhe River and Xingjiabao and the section between Xingjiabao and Yijing, the three sections show different characters of tectonic landform. The section between Xiweikou and Panhe River is a kind of typical basin-mountain landform, where diluvial fans spread widely. In the north of Yumenkou, the fault deforms the diluvial fans, forming scarps, along which the fault extends. In the south of Yumenkou, the fault extends along the rear edge of the diluvial fans. In the section between Panhe River and Xingjiabao the fault extends along the front of the loess mesa. In the section between Xingjiabao and Yijing the fault forms scarp in the loess and extends as an arc shaped zone, and the landform is formed by the accumulative deformation of the fault. The activity of the fault becomes weak gradually from northeast to southwest. The fault activity of the section between Xiweikou and Panhe River is the strongest, and the latest age of activity is Holocene. The slip rate since the mid-Holocene is bigger than 0.8mm/a at Yumenkou. The fault activity of the section between Panhe River and Xingjiabao is weaker than the north part, the fault's latest active age is identified as the later period of Late Pleistocene and the activity becomes weak gradually from northeast to southwest. At the estuary of the Jushui River the slip rate of the fault is about 0.49mm/a since late Late Pleistocene. The fault activity of the section between Xingjiabao and Yijing is the weakest. There is no evidence of paleosol S1 deformed in fault profiles, and only some phenomena of fracture and sand liquefaction in the earlier Late Pleistocene loess. The activity of the fault is in line with the fault landform feature. At macro level, the relationship between the uplifted side and the thrown side of the fault switches gradually from the Ordos uplifting region and the rifted basin to the interior blocks of the rifted basin, which maybe is the regional reason why the activity of the Hancheng Fault becomes weak from the northeast to the southwest. 相似文献
14.
QUANTITATIVE STUDY OF FAULT ACTIVITY BASED ON HIGH-PRECISION AIRBORNE LiDAR DATA: A CASE OF XIAOHONGSHAN FAULT IN XIANGSHAN-TIANJINGSHAN FAULT ZONE 下载免费PDF全文
下载免费PDF全文 High-precision and high-resolution topography are the basis of quantitative study of active tectonics. Traditional methods are mainly interpreted from the remote sensing image and can only obtain two-dimensional, medium-resolution DEM(5~10m grid unit)or local three-dimensional surface deformation characteristics. A combination of offset and micro-relief information is essential for understanding the long-term rupture pattern of faults, such as in seismic hazard evaluation. The recently developed high-resolution light detection and ranging(LiDAR)technology can directly carry out high-precision and omni-directional three-dimensional measurement of the landform, and provide fine geomorphologic data for the study of active tectonics, which is helpful to deepen the understanding of surface rupture process and fault activity characteristics. In this study, we take part of the Xiaohongshan Fault, the western segment of Xiangshan-Tianjingshan Fault located in Gansu Province(NE Tibet), as an example of how LiDAR data may be used to improve the study of active faults. Using the airborne LiDAR technology, we obtain the three-dimensional surface deformation characteristics with high accuracy and establish the three-dimensional topographic model of the fault geomorphic. A high-resolution digital elevation model(DEM)of the Jingtai-Xiaohongshan Fault was extracted based on high-precision LiDAR data. Then the faulted geomorphic markers(gullies, ridges and terraces)were measured in detail along the fault, and different offset clusters and long-term sliding vector of different segments of the fault were finally acquired. We obtained the 82 horizontal displacements and 62 vertical displacements of geomorphic markers. According to the offset amounts, we observed peaks in the histogram by using the method of cumulative offset probability density and interpreted that each peak may represent an earthquake that ruptured the Xiaohongshan Fault. The results show that the horizontal and vertical displacements fall into five clusters, and the smallest cluster may indicate the coseismic slip of the most recent earthquake, while the other clusters may represent the slip accumulation of multiple preceding earthquakes. The sliding vectors constrained by the horizontal and vertical displacement of several typical geomorphic markers show obvious differences on different segments of the fault. The results show that the fault segment is divided into three segments from west to east, which indicates that the fault activity is not uniform along the fault. 相似文献
15.
Along the northern piedmont of Mt. Lishan, the characteristics and locations of the active normal Lishan fault in west of Huaqing Pool provide important evidences for determining the seismotectonic environment, seismic stability evaluation of engineering in the eastern Weihe Basin. After reviewing the results from high-density resistivity method, seismic profile data, geological drillhole section and trenching in west of the Huaqing Pool, it is found that the strike of western normal Lishan Fault changes from EW direction at the eastern part to the direction of N60°W, and the fault consists of two branches, dipping NE with a high dip angle of~75°. The artificial shallow seismic profile data reveals that the attitude of strata near Lishan Fault mainly dips to south, which is presumed to be related to the southward tilt movement of Mt. Lishan since the Cenozoic. The section of geological drillhole reveals that since the late middle Pleistocene, the displacement of the paleo-soil layer S2 is about 10m. And the maximum displacement of western Lishan Fault recorded in the paleo-soil layer S1 reaches 7.8m since the late Pleistocene.
In addition, evidences from trench profile show that the western Lishan Fault was active at least 3 times since Malan loess deposition with 14 C dating age(32 170±530)Cal a BP. The multiple activities of the Lishan Fault result in a total displacement about 3.0m in the Malan loess layer L1. The latest activity of the western Lishan Fault produced a displacement of about 0.9m in the early Holocene loess layer L0((8 630±20)Cal a BP)and caused obvious tensile cracks in the Holocene dark leoss layer S0((4 390±20)Cal a BP). Briefly, we have obtained a vertical movement rate of about 0.11~0.19mm/a since the Holocene((8 630±20)Cal a BP)in the western extension of the Lishan Fault, the recurrence interval of earthquakes on the fault is about(10.7±0.5)ka, and the co-seismic surface rupture in a single event is inferred to be about 0.9m. 相似文献
16.
汶川8.0级地震及余震破裂的地质构造特征 总被引：5，自引：0，他引：5
汶川8.0级地震是发生在龙门山断裂带上的大地震,文中应用地震地表破裂调查资料、余震分布和震源机制资料,论述了该次地震的主破裂、次级破裂、触发破裂等方面的地质特征.认为该次地震的主破裂长约200 km,分为南、北两段.南段以逆冲破裂为主,由两条破裂带构成,并引起上盘多条近平行的次级断裂带的破裂;北段以右旋逆冲破裂为主,由单条破裂带构成;在主破裂的东北方向,触发了长约100 km的余震活动.汶川8.0级地震的破裂特征,对研究龙门山断裂带其他段落的强震危险性具有重要意义. 相似文献
17.
Geologic evidence for late Quaternary repetitive surface faulting on the Isurugi fault along the northwestern margin of the Tonami Plain,north‐central Japan 下载免费PDF全文
下载免费PDF全文 Our detailed field investigation, paleoseismic trenching, and airborne light detection and ranging (LiDAR)‐derived topographic data provides the first direct evidence for late Quaternary repetitive surface faulting on the northeast‐striking Isurugi fault along the northwestern margin of the Tonami Plain in the Hokuriku region of north‐central Japan. This fault has been interpreted previously by different researchers as both inactive and active, owing to a lack of geologic evidence and a failure to identify fault‐related geomorphic features. Our mapping of LiDAR topography revealed a series of northeast‐trending warped fluvial terraces, about 1.5 km long and 170 m wide, with an age of ≤ 29 ka. We interpreted these geomorphologic features to represent an active pop‐up structure bounded to the southeast by the northwest‐dipping main thrust of the Isurugi fault and to the northwest by a southeast‐dipping backthrust that splays off the main thrust in the shallow subsurface. Paleoseismic trenching across the northwestern part of an elongate terrace exposed a series of southeast‐dipping backthrusts and associated northwest‐verging monoclines. The deformation and depositional age of the strata provide evidence for repetitive surface rupturing on the backthrusts since the latest Pleistocene; the latest of these events occurred in the Holocene between about 4.0 and 0.9 ka. Despite the poor preservation of the surface expression of the Isurugi fault, repetitive scarp‐forming faulting in the late Quaternary and the proximity of the Oyabe River and its tributaries to the fault trace suggest that there may be an extension of the Isurugi fault to the northeast and southwest beneath the Tonami Plain that makes the fault long enough to generate a large earthquake (Mw ≥ 6.8) accompanied by surface rupture. 相似文献
18.
Robust inversion analysis of local gravity anomalies caused by geological dislocation model of faults 总被引：5，自引：0，他引：5
ＲｏｂｕｓｔｉｎｖｅｒｓｉｏｎａｎａｌｙｓｉｓｏｆｌｏｃａｌｇｒａｖｉｔｙａｎｏｍａｌｉｅｓｃａｕｓｅｄｂｙｇｅｏｌｏｇｉｃａｌｄｉｓｌｏｃａｔｉｏｎｍｏｄｅｌｏｆｆａｕｌｔｓＪＩＡＮＬＩＡＮＧＨＵＡＮＧ（黄建梁）ＣＨＯＮＧＹＡＮＧＳＨＥＮ（申... 相似文献
19.
在广泛搜集以往研究资料的基础上,运用野外地震地质考察、典型地质剖面和探槽剖面分析、系统取样等方法,研究了苍山-尼山断裂的活动性质、最新活动时代和古地震事件。研究表明：苍山-尼山断裂以左旋走滑运动为主兼有逆冲运动分量;其第四纪晚期以来的活动具有分段性,以甘霖为界,北西段为晚更新世晚期至全新世早期,南东段为晚更新世晚期;有确凿证据的古地震事件有2次,其发生时间分别是距今6.4万年左右（E1）和距今1.4万年左右（E2）;另据考证,公元前179年＂齐楚地震＂也发生在该断裂上。根据历史地震和现代地震的研究成果,分析认为该断裂未来具有发生6.5级左右地震的潜在危险。 相似文献