共查询到20条相似文献，搜索用时 47 毫秒
1.
Sand dunes as a major proximal dust source for late Pleistocene loess in the Negev Desert, Israel 总被引：3，自引：0，他引：3
Grain size analyses of three hilltop, primary eolian loess sequences in the Negev desert, southern Israel, show a bimodal grain-size distribution at 50-60 μm and 3-8 μm. Using analyses of mineralogy and OSL ages we demonstrate that the coarse mode is composed mostly of quartz grains and its relative magnitude increases regionally with time, suggesting an enhancement of a time-transgressive proximal dust source compared to a distal, Saharan fine-grain dust. The only proximal dust source for large amount of coarse silt quartz grains is the sands that advanced into Sinai and the Negev concurrently with the loess accretion during the late Pleistocene as a result of the exposure of the Mediterranean shelf. We therefore propose that the coarse silt quartz grains were formed through eolian abrasion within the margins of an advancing sand sea. This relationship between desert sand seas as a source for proximal coarse dust and desert margin loess deposits can be applicable to other worldwide deserts such as Northern Africa, China and Australia. 相似文献
2.
JUAN PEDRO RODRÍGUEZ‐LÓPEZ NIEVES MELÉNDEZ POPPE L.
De BOER ANA ROSA SORIA 《Sedimentology》2010,57(5):1315-1356
Aeolian processes and ephemeral water influx from the Variscan Iberian Massif to the mid‐Cretaceous outer back‐erg margin system in eastern Iberia led to deposition and erosion of aeolian dunes and the formation of desert pavements. Remains of aeolian dunes encased in ephemeral fluvial deposits (aeolian pods) demonstrate intense erosion of windblown deposits by sudden water fluxes. The alternating activity of wind and water led to a variety of facies associations such as deflation lags, desert pavements, aeolian dunes, pebbles scattered throughout dune strata, aeolian sandsheets, aeolian deposits with bimodal grain‐size distributions, mud playa, ephemeral floodplain, pebble‐sand and cobble‐sand bedload stream, pebble–cobble‐sand sheet flood, sand bedload stream, debris flow and hyperconcentrated flow deposits. Sediment in this desert system underwent transport by wind and water and reworking in a variety of sub‐environments. The nearby Variscan Iberian Massif supplied quartzite pebbles as part of mass flows. Pebbles and cobbles were concentrated in deflation lags, eroded and polished by wind‐driven sands (facets and ventifacts) and incorporated by rolling into the toesets of aeolian dunes. The back‐erg depositional system comprises an outer back‐erg close to the Variscan highlands, and an inner back‐erg close to the central‐erg area. The inner back‐erg developed on a structural high and is characterized by mud playa deposits interbedded with aeolian and ephemeral channel deposits. In the inner back‐erg area ephemeral wadis, desiccated after occasional floods, were mud cracked and overrun episodically by aeolian dunes. Subsequent floods eroded the aeolian dunes and mud‐cracked surfaces, resulting in largely structureless sandstones with boulder‐size mudstone intraclasts. Floods spread over the margins of ephemeral channels and eroded surrounding aeolian dunes. The remaining dunes were colonized occasionally by plants and their roots penetrated into the flooded aeolian sands. Upon desiccation, deflation resulted in lags of coarser‐grained sediments. A renewed windblown supply led to aeolian sandsheet accumulation in topographic wadi depressions. Synsedimentary tectonics caused the outer back‐erg system to experience enhanced generation of accommodation space allowing the accumulation of aeolian dune sands. Ephemeral water flow to the outer back‐erg area supplied pebbles, eroded aeolian dunes, and produced hyperconcentrated flow deposits. Fluidization and liquefaction generated gravel pockets and recumbent folds. Dune damming after sporadic rains (the case of the Namib Desert), monsoonal water discharge (Thar Desert) and meltwater fluxes from glaciated mountains (Taklamakan Desert) are three potential, non‐exclusive analogues for the ephemeral water influx and the generation of hyperconcentrated flows in the Cretaceous desert margin system. An increase in relief driven by the Aptian anti‐clockwise rotation of Iberia, led to an altitude sufficient for the development of orographic rains and snowfall which fed (melt)water fluxes to the desert margin system. Quartzite conglomerates and sands, dominantly consisting of quartz and well‐preserved feldspar grains which are also observed in older Cretaceous strata, indicate an arid climate and the mechanical weathering of Precambrian and Palaeozoic metamorphic sediments and felsic igneous rocks. Unroofing of much of the cover of sedimentary rocks in the Variscan Iberian Massif must therefore have taken place in pre‐Cretaceous times. 相似文献
3.
The Late Pleistocene and Holocene loess deposits of the SE Buenos Aires province are composed of four allostratigraphic units that represent four episodes of loess deposition. The first and the second episodes occurred in Late Pleistocene times. The second episode was followed by a soil forming interval (Early Holocene to Mid-Holocene times). The third episode took place at about 5000 yr BP, after the Holocene sea-level maximum when marine regression began. The fourth episode constitutes a historical event of only local significance.Loess shows a fairly constant granulometric and mineralogical composition. The modal fraction consists of very fine sand and coarse silt (3 to 5 phi). They are classified as sandy silts or silty sands. Three grain-size subpopulations are differentiated: coarse, medium and fine. The medium-size subpopulation, which is the most important, consists of most of the very fine sand and coarse silt. It is thought to be transported by modified saltation and short-term suspension during local dust-storms.The mineralogical composition of loess consists of a volcaniclastic assemblage derived mainly from reworked pyroclastic deposits, primary tephras and volcaniclastic sediments. The source area of these materials was located in the lower Colorado river valley about 400 km SW of the studied area. There was also a direct supply by volcanic ash falls. 相似文献
4.
Nico W. Willemse Eduard A. Koster Babette Hoogakker Frank G. M. van Tatenhove 《Quaternary Research》2003,59(3):322-334
Eolian landforms are widespread alongside proglacial valley-sandurs in West Greenland and comprise low-relief sand sheets, climbing dunes, and upland loess. Sedimentary facies mainly reflect distance to outwash-source zones and the influence of vegetation cover. The sediments show stratification types typical for poorly to moderately vegetated sand-sheets, alternately laminated silt/peat sequences, and unstratified loess. Twenty-five accelerator mass spectrometry 14C dates provide the basis for the chronostratigraphy of the inland eolian deposits. 14C dates from interstratified sand-sheets suggest that the bulk of eolian sands were deposited prior to 3400 cal yr B.P. and after 550 cal yr B.P. This two-phase formation for the inland dunes most likely reflects local changes in proglacial floodplain development and meltwater rerouting associated with a significant recession of the Greenland ice sheet during the mid Holocene climate optimum. Subsequent floodplain regeneration and renewed sand-sheet formation after 550 cal yr B.P. followed when the ice margin readvanced to its present position. In contrast, atmospheric deposition of regionally derived silt in upland peat mires has been continuous since at least 4750 cal yr B.P. Silt influx data demonstrate a strongly episodic history of the intensity of eolian activity over the past five millennia, which tentatively reflects alternating periods of (winter) aridity associated with the variable incursion of maritime air masses over the interior ice-free areas of West Greenland. 相似文献
5.
青藏高原古里雅冰帽冰碛和冰水沉积物粒度特征及其意义 总被引：1，自引：1，他引：0
冰冻圈演化不仅与青藏高原水塔变化、地表侵蚀风化及荒漠化密切相关,还深刻影响着亚洲季风系统和全球气候,冰碛物的粒度组成可以为冰冻圈演化提供重要信息,但高原冰碛物的特征粒度组成及其形成机理仍不清楚,高原冰碛物与高原冷黄土及河湖沉积物的关系也不明确。为此,选择青藏高原最大的冰帽——古里雅冰帽的冰碛物及系列冰水沉积物,开展系统粒度组成研究。研究发现：自终碛到冰川前端冰水扇及下游河流冰水沉积均表现出特征的双峰模态,即1~3 Φ（500~125 μm）的中细砂峰和6~8 Φ（16~4 μm）的细粉砂峰,前者可能由冰川压碎、寒冻风化崩裂作用造成,后者由冰川研磨作用形成,并受到源区基岩岩性软弱和组成颗粒大小的影响。冰川磨蚀的细粉砂组分含量,从冰碛物经冰水扇、河流到湖滩沉积物整体呈现减小趋势,粗粉砂在湖滩沉积中几乎完全被风吹走,粗粉砂直接成为下游黄土的物源并富集其中成为黄土特征组分,水流分选在开口湖泊中产生粗、细粉砂的明显富集,这些证据揭示出,无论是与冰川发育相关的尾闾湖沉积还是近源、远源的青藏高原及周边黄土沉积,其粉砂组成和来源,均可为高原冰冻圈的形成演化提供重要信息。 相似文献
6.
ABSTRACT Weathering simulations carried out using a climatic cabinet have demonstrated that diurnal temperature and humidity variations typical of those occurring in warm desert environments are ineffective in causing static breakage of quartz dune sand and polymineralic regolith sand grains. Wetting and drying combined with temperature variations was also found to be a relatively ineffective weathering process. These results suggest that 'crack tip' processes are insignificant where mineral grains are not subject to static loading. Sodium sulphate weathering was found to cause slight damage to quartz dune sand grains and major damage to first cycle regolith grains. Feldspars and mica in the regolith sands were more susceptible to salt action than quartz. Salt weathering of the regolith sands produced substantial quantities of silt in the size range typically found in natural loess deposits. 相似文献
7.
8.
本文分析研究了昆仑山北坡克里雅河流域风成物质的粒度特征。该流域四大地貌景观带的地表沉积物表层样品的机械组成差别明显,黄土的粒度组成以粉砂为主,比我国黄河中游地区的黄土粗得多,亚砂土的主要成分为微砂,沙漠地区以细砂为主。除戈壁带以"非地"形式出现以外,由沙漠中心向南至昆仑山,在西北风和东北风的作用下,风成物质的粒度由粗变细。流域出露的黄土主要是在晚更新世和全新世沉积的。 相似文献
9.
Liquefaction characteristics of silts 总被引：1，自引：0，他引：1
S. Singh 《Geotechnical and Geological Engineering》1996,14(1):1-19
Summary The paper presents a summary of the results of cyclical triaxial load testing of samples of silt and silty sands. The paper emphasizes differences in behaviour observed between reconstituted triaxial samples of clean sand, of sand containing 10, 20, 30 and 60% silt, pure silt, and undisturbed samples of silt and silty sand. An important observation is that the mechanisms of deformation for sit are different for reconstituted and undisturbed samples, the undisturbed sample having a specific geological structure which seems to slow down the excess pore water pressure accumulation, but which still results in cyclic deformations regularly increasing from the very beginning of the test and rapidly reaching high levels. The other important observation is that fine-grained noncohesive soils such as silts and silty sands can be as, or even more, susceptible to liquefaction as clean sands. Test results on samples of sand containing 10, 20 or 30% of silt indicate lesser resistance to liquefaction than pure sand samples. The paper shows the difficulty in identifying a representative parameter to compare the behaviour of silts and silty sands with pure sand, and it seems that more research will be needed in this area. 相似文献
10.
Identification and characterization of aeolian deposits in arid environments provide information on mechanisms of loess and sand accumulation. The objectives of this study were to (i) identify the distribution of aeolian deposits, (ii) discriminate loess and sand deposits using granulometric data, and (iii) describe the aeolian deposition in Sarakhs area, northeastern Iran. Particle size distributions of 26 surface samples were determined using a laser grain-size analyzer. Fine sand, very fine sand, and very coarse silt were dominant fractions in studied sediments, and the sum of these fractions ranged from 46.9% in loess deposits to 93.8% in sand dunes. The mean grain size (M z ) of sand dunes ranged from 3.31 to 3.54 ?, which gradually changed to 4.09 to 5.50 ? in loess deposits. Sorting, skewness, and kurtosis ranged from 0.84 to 1.94 ?, 0.18 to 0.49, and 0.76 to 2.38, respectively. Aeolian deposits in the area resulted in the incorporation of Hariroud River system and Kopeh Dagh Mountains for aeolian particle production and accumulation. Alluvial comminution in Hariroud River is suggested the main mechanism of sand and silt production and flood plain environment the main reservoir of these particles. The mountains of Kopeh Dagh act as a barrier and play a key role for sand and loess accumulation. 相似文献
11.
JUAN PEDRO RODRÍGUEZ‐LÓPEZ NIEVES MELÉNDEZ POPPE L. DE BOER ANA ROSA SORIA 《Sedimentology》2008,55(5):1253-1292
The existence of a mid‐Cretaceous erg system along the western Tethyan margin (Iberian Basin, Spain) was recently demonstrated based on the occurrence of wind‐blown desert sands in coeval shallow marine deposits. Here, the first direct evidence of this mid‐Cretaceous erg in Europe is presented and the palaeoclimate and palaeoceanographic implications are discussed. The aeolian sand sea extended over an area of 4600 km2. Compound crescentic dunes, linear draa and complex aeolian dunes, sand sheets, wet, dry and evaporitic interdunes, sabkha deposits and coeval extradune lagoonal deposits form the main architectural elements of this desert system that was located in a sub‐tropical arid belt along the western Tethyan margin. Sub‐critically climbing translatent strata, grain flow and grain fall deposits, pin‐stripe lamination, lee side dune wind ripples, soft‐sediment deformations, vertebrate tracks, biogenic traces, tubes and wood fragments are some of the small‐scale structures and components observed in the aeolian dune sandstones. At the boundary between the aeolian sand sea and the marine realm, intertonguing of aeolian deposits and marine facies occurs. Massive sandstone units were laid down by mass flow events that reworked aeolian dune sands during flooding events. The cyclic occurrence of soft sediment deformation is ascribed to intermittent (marine) flooding of aeolian dunes and associated rise in the water table. The aeolian erg system developed in an active extensional tectonic setting that favoured its preservation. Because of the close proximity of the marine realm, the water table was high and contributed to the preservation of the aeolian facies. A sand‐drift surface marks the onset of aeolian dune construction and accumulation, whereby aeolian deposits cover an earlier succession of coastal coal deposits formed in a more humid period. A prominent aeolian super‐surface forms an angular unconformity that divides the aeolian succession into two erg sequences. This super‐surface formed in response to a major tectonic reactivation in the basin, and also marks the change in style of aeolian sedimentation from compound climbing crescentic dunes to aeolian draas. The location of the mid‐Cretaceous palaeoerg fits well to both the global distribution of other known Cretaceous erg systems and with current palaeoclimate data that suggest a global cooling period and a sea‐level lowstand during early mid‐Cretaceous times. The occurrence of a sub‐tropical coastal erg in the mid‐Cretaceous of Spain correlates with the exposure of carbonate platforms on the Arabian platform during much of the Late Aptian to Middle Albian, and is related to this eustatic sea‐level lowstand. 相似文献
12.
Geochemical and isotopic studies of aeolian sediments in China 总被引：5，自引：0，他引：5
The Sr and Nd isotopic, rare earth element (REE) and major element compositions, together with mineral and grain‐size proportions, are reported for aeolian loess deposits and desert sands from several Chinese localities. The study was carried out in order to examine regional variations in the isotopic and geochemical features of these aeolian sediments, and to constrain the provenance of Chinese loess. Samples include loesses from the Tarim and Junggar basins and desert sands from the Taklimakan desert in north‐west China, loess from the Ordos area and desert sands from the Tengger and Mu‐us deserts in north‐central China, as well as loess and desert sands from the Naiman area, north‐east China. REE distributions show minimal variation among the Chinese loess deposits, whereas those for the desert sands show regional variations. New isotopic data document a latitudinal variation in Sr and Nd isotopic features for the loesses and desert sands. The Naiman and Junggar loesses have distinctly lower 87Sr/86Sr ratios and higher εNd(0) values than the loesses from the Tarim Basin, the Ordos area and the Loess Plateau. Among the desert sands, the Naiman samples have higher εNd(0) values than the Taklimakan, Tengger and Mu‐us samples. Isotopic data suggest that loesses of the Loess Plateau were supplied from the Tarim Basin loesses and Taklimakan Desert sand, and that the Naiman loesses were supplied from the Junggar Basin loesses. The latitudinal variation in the loesses and desert sands may be partly explained by isotopic variations reported previously for moraines from the Tianshan and west Kunlun Mountains, which are possible sources for the loesses and desert sands. These inferences on the provenance of the loesses and desert sands are consistent with the dust transport pattern over East Asia. 相似文献
13.
Janet S. Wright 《Sedimentary Geology》2007,202(3):337-351
Quartz silt is a widespread detrital sediment with large aeolian (loess) and alluvial silt deposits forming important components of many contemporary landscapes. Despite research findings which indicate that a range of opportunities exist for the comminution of quartz into silt particles within a wide variety of geomorphic environments (e.g. glacial grinding, fluvial comminution, aeolian abrasion, frost weathering, salt weathering, insolation weathering and deep weathering), the ‘glacial-aeolian’ hypothesis has traditionally been favoured as the most likely explanation for loess formation and loess is seen as primarily a Quaternary phenomenon. As a consequence there has been a tendency to underestimate sediment inputs into loess systems by geomorphological processes operating within pre-Quaternary environments. In particular, earth scientists may have considerably underestimated the role of weathering in global silt generation, as there are now many references to the existence of a patchy but widespread distribution of pre-Quaternary weathering profiles across the glacial and periglacial landscapes of the Northern Hemisphere (e.g. North America, British Isles, north and central Europe), landscapes within which many of the classical loess deposits are located. These observations suggest that weathering profiles may have covered large tracts of the Northern Hemisphere land surface prior to the Quaternary glaciations. This, in turn, may have important implications for quartz silt generation as: (1) experimental studies indicate that many weathering processes are capable of generating significant quantities of silt-sized debris, and (2) particle characteristics displayed by saprolitic material that has developed on quartz rich crystalline source rocks often include significant quantities of either silt-sized material, or quartz grains that are weakened by weathering derived microfractures. Thus, weathering profiles may represent ‘mines’ of actual and potential quartz silt, available for release into sedimentary systems when these profiles are subsequently reworked by geomorphological processes such as glacial, fluvial and aeolian erosion. 相似文献
14.
ROGER ANDERTON 《Sedimentology》1976,23(4):429-458
The Jura Quartzite, a formation of probably late Precambrian metasediments over 5 km thick from the Caledonian belt in Southwest Scotland, has been divided into a coarse and three fine facies. The former comprises cross-bedded sands with some laminated sands and silt horizons, interpreted as the deposits of shallow marine tidal dunes and other bedforms together with some beach units. Deposition from suspension of silt and sand formed climbing dunes while largescale erosion produced flat or channelled surfaces. The fine facies comprise laterally persistent, parallel and cross-laminated sand units from millimetres to decimetres thick, interbedded with muds. The coarse and fine facies can be finely interbedded, the former sometimes filling decimetre deep, straight channels, cut in the latter. The fine facies exhibit structures indicative of deposition from decelerating currents and are interpreted as shallow marine storm deposits. The facies are compared with a model developed from published observations on modern shelf areas. Zones of erosion, large and small dunes, flat bedded sand and mud are considered to be the end product of a wide spectrum of tidal and storm conditions. During severe storms the fair weather tidal dunes may be modified or washed out, new dunes may be initiated downcurrent of the normal dune field while storm-sand layers are deposited in the distal zones. Hence, the nature of the preserved sediment blanket reflects the rare severe storm event rather than normal tidal conditions. The Jura Quartzite was deposited in a tidal gulf intimately connected with an ocean basin. The north-northeast directed palaeocurrent modes are probably roughly parallel to the coastline. 相似文献
15.
FIKRY KHALAF 《Sedimentology》1989,36(2):253-271
Several types of aeolian deposits have been recognized in Kuwait: (a) smooth sand sheets that resemble desert floor sand, (b) immobile sands that include rugged vegetated sand sheets and wadi fill deposits, and (c) mobile sands that form active sand sheets and sand dunes. Simple size frequency curves illustrate the genetic relationship between the various aeolian sediment types. The four size parameters, namely, mean size, sorting, skewness and kurtosis, were calculated. Scatter plot diagrams of sorting versus mean size and sorting versus kurtosis are effective in differentiating smooth sand sheet deposits from dune sands. Active sand sheet deposits can also be recognized because they are usually located between the two end members–smooth sand sheets and dune sands. Size parameters change with location regardless of their types. Coarsening and positive skewness usually increase downwind. Mineralogical and textural characteristics of the aeolian deposits in Kuwait revealed that they are mostly derived from the lower Mesopotamian muddy flood plain deposits, the sand fraction of the Al-Dibdibba gravelly deposits and the disintegrated material from calcretic and gypcretic duricrusts. Distribution of depositional and deflational areas indicates that the northern desert of Kuwait is characterized by a positive sand budget, whereas the southern desert has a negative sand budget. 相似文献
16.
Silt is available in many parts of the world in combination with sands and clays. However, due to lack of clear understanding of its engineering behaviour, most of the time it is interpreted in terms of either sands or clays. Structures that are usually built on silty soils are designed to take into account design procedures developed for sandy or clayey soils. Presence of silts in combination with varying amount of sand and clays produces silt that is either plastic or non-plastic in nature. Silt is available in and around the Delhi region, in a majority mixture along with fine sands, which is non-plastic in nature. On the other hand silty deposits found in offshore Bombay High region are found in abundance along with significant amounts of clays and are termed as plastic silts. In this paper a comparison of the stress-strain behaviour of plastic and non-plastic silts is carried out under triaxial compression loading during both drained and undrained conditions. Two representative samples each from Delhi and Bombay High regions were considered for this comparison and results of stress-strain under four sets of confining pressure are discussed in detail. It is observed from this study that behaviour of silts is mainly dependent on the composition and structure of the resultant soil matrix. It is concluded from the results that shear strength parameters as well as volume change/pore pressure response of silty soils is dominated by the constituent soil present along with the silt. It is seen from the comparative behaviour of non-plastic and plastic silts that the presence of sand and clays has a governing effect on pore pressure development and the resultant friction angle. The study also corroborated that the nature of silt is transitional both in the case of plastic and non-plastic forms. 相似文献
17.
Measurements were made of tidal currents, bed sediment particle sizes, and bedform dimensions at the South Branch and the
South Channel of the Changjiang estuary, China, during the dry season in 1997 and the flood season in 1998. The near bottom
current speed and direction were measured by a mechanical current meter for 10 h in 1997. The near surface current speed and
direction were measured by a Current Meter of Endeco/YSI Inc. 174 SSM for 14 h in 1997 and 1998. Nine bed sediment samples
were taken and their particle sizes were analyzed with sieves and siphons. The bedforms were nautically detected by an echo
sounder and a side scan sonar. Results show that the ebb tides had larger near-bottom and near-surface current speeds and
longer durations than the flood tides, in which the former occurred during the flood season in 1998 and not in the dry season
in 1997. The bed sediments were composed of coarse silts and very fine sands during the dry season but of fine sands during
the flood season. Bedforms were dominated by ebb tidal currents, the height∶length ratios of dunes and lee face angles were
low, and heights and lengths were larger during the flood season in 1998. The ebb and flood tidal currents, bed sediment sizes,
and dune morphology were largely controlled by the seasonal runoff variations. A new tentative boundary might be proposed
for natural dunes in very fine sand with the availability of additional field data in the future. 相似文献
18.
Loose saturated cohesionless soils are most susceptible to liquefaction, however there are strong historical evidence suggesting that soils containing fines such as silty sands are also prone to liquefaction during earthquakes. The liquefaction of silty sands has been observed in a number of recent case studies. This paper presents the effects of fine silts on liquefaction potential of sandy soil. Tests have been conducted on the vibration table at different accelerations and pore water pressure is measured. During the lab investigation, locally (Roorkee, India) available Solani Sand and Dhanauri Silt have been used. The soil samples have been prepared by varying silt content and the initial relative density. The results of the study performed are used to clarify the effects of non-plastic fines content on the Solani sand. As the silt content increases, the number of cycles required to produce maximum pore water pressure increases. For a particular level of excitation, rate of pore water pressure generation is maximum at critical silt content. It is observed that critical silt content to generate maximum pore water pressure is different for different accelerations. Further, effect of silt content is very much dependent on relative density. 相似文献
19.
In muddy sediments, the distinction between sortable silt and aggregated silty clay is important for the understanding of fine particle dynamics because both have different hydraulic properties. The Wadden Sea of the southern North Sea is severely depleted in fine-grained sediments mainly due to high energy levels along the diked coastline. As a result, muddy sediments are restricted to a narrow belt along the diked mainland shore. In the present study, the mechanism by which this mud is deposited and how floc deposition and break-up are reflected in the size distribution, has been investigated. For this purpose, surficial sediments from four intertidal nearshore transects were monitored and repeatedly sampled in the course of two years. High-resolution grain-size analyses were performed by an automated settling tube and a Sedigraph particle analyser for the sand and mud fractions, respectively.The grain size frequency distributions of the fine fractions demonstrate that the Wadden Sea muds are composed of two subpopulations, a well-sorted coarse silt and an unsorted silty clay population. A depletion of grain size around 8 μm (7 phi) demarcates the grain-size boundary between the two populations, suggesting that the finer mud population (< 8 μm) is deposited in the form of flocs and aggregates which are hydraulically equivalent to the local sands and coarser silts. Floc break-up and reconstitution in response to seasonally changing energy regimes lead to apparent seasonal sedimentation patterns in the back-barrier tidal basins. Furthermore, in the course of sample preparation, the flocs and aggregates are broken down into their constituent particles. This mechanical artefact in the size distributions produces an artificial seasonal fining/coarsening pattern. It was found that the comparison of clay/silt and < 8 μm/63 − 8 μm particle ratios are good indicators of floc behaviour. Higher ratios are found in mixed flats which are relatively protected from wave action, thereby promoting deposition of flocs. In addition, progressive size sorting and mixing processes along the transects are recognized in the frequency distributions of sands. The skewness pattern shows a landward decrease in positive values, which is exactly opposite to previously reported patterns, suggesting progressive winnowing of fine particles caused by increased wave action over the last decade. This effect of climate change further promotes depletion of fine-grained sediments in the basin. 相似文献
20.
Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study 总被引：3，自引：0，他引：3
A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale. 相似文献