首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Reflection full waveform inversion can update subsurface velocity structure of the deeper part, but tends to get stuck in the local minima associated with the waveform misfit function. These local minima cause cycle skipping if the initial background velocity model is far from the true model. Since conventional reflection full waveform inversion using two‐way wave equation in time domain is computationally expensive and consumes a large amount of memory, we implement a correlation‐based reflection waveform inversion using one‐way wave equations to retrieve the background velocity. In this method, one‐way wave equations are used for the seismic wave forward modelling, migration/de‐migration and the gradient computation of objective function in frequency domain. Compared with the method using two‐way wave equation, the proposed method benefits from the lower computational cost of one‐way wave equations without significant accuracy reduction in the cases without steep dips. It also largely reduces the memory requirement by an order of magnitude than implementation using two‐way wave equation both for two‐ and three‐dimensional situations. Through numerical analysis, we also find that one‐way wave equations can better construct the low wavenumber reflection wavepath without producing high‐amplitude short‐wavelength components near the image points in the reflection full waveform inversion gradient. Synthetic test and real data application show that the proposed method efficiently updates the background velocity model.  相似文献   

2.
In the second paper of this three part series, we studied the case of conventional and logarithmic phase‐only approaches to full‐waveform inversion. Here, we concentrate on deriving amplitude‐only approaches for both conventional‐ and logarithmic‐based methods. We define two amplitude‐only objective functions by simply assuming that the phase of the modelled wavefield is equal to that of the observed wavefield. We do this for both the conventional least‐squares approach and the logarithmic approach of Shin and Min. We show that these functions can be optimized using the same reverse‐time propagation algorithm of the full conventional methodology. Although the residuals in this case are not really residual wavefields, they can both be considered and utilized in that sense. In contrast to the case for our phase‐only algorithms, we show through numerical tests that the conventional amplitude‐only inversion is better than the logarithmic method.  相似文献   

3.
Full‐waveform inversion is re‐emerging as a powerful data‐fitting procedure for quantitative seismic imaging of the subsurface from wide‐azimuth seismic data. This method is suitable to build high‐resolution velocity models provided that the targeted area is sampled by both diving waves and reflected waves. However, the conventional formulation of full‐waveform inversion prevents the reconstruction of the small wavenumber components of the velocity model when the subsurface is sampled by reflected waves only. This typically occurs as the depth becomes significant with respect to the length of the receiver array. This study first aims to highlight the limits of the conventional form of full‐waveform inversion when applied to seismic reflection data, through a simple canonical example of seismic imaging and to propose a new inversion workflow that overcomes these limitations. The governing idea is to decompose the subsurface model as a background part, which we seek to update and a singular part that corresponds to some prior knowledge of the reflectivity. Forcing this scale uncoupling in the full‐waveform inversion formalism brings out the transmitted wavepaths that connect the sources and receivers to the reflectors in the sensitivity kernel of the full‐waveform inversion, which is otherwise dominated by the migration impulse responses formed by the correlation of the downgoing direct wavefields coming from the shot and receiver positions. This transmission regime makes full‐waveform inversion amenable to the update of the long‐to‐intermediate wavelengths of the background model from the wide scattering‐angle information. However, we show that this prior knowledge of the reflectivity does not prevent the use of a suitable misfit measurement based on cross‐correlation, to avoid cycle‐skipping issues as well as a suitable inversion domain as the pseudo‐depth domain that allows us to preserve the invariant property of the zero‐offset time. This latter feature is useful to avoid updating the reflectivity information at each non‐linear iteration of the full‐waveform inversion, hence considerably reducing the computational cost of the entire workflow. Prior information of the reflectivity in the full‐waveform inversion formalism, a robust misfit function that prevents cycle‐skipping issues and a suitable inversion domain that preserves the seismic invariant are the three key ingredients that should ensure well‐posedness and computational efficiency of full‐waveform inversion algorithms for seismic reflection data.  相似文献   

4.
Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.  相似文献   

5.
Time‐lapse refraction can provide complementary seismic solutions for monitoring subtle subsurface changes that are challenging for conventional P‐wave reflection methods. The utilization of refraction time lapse has lagged behind in the past partly due to the lack of robust techniques that allow extracting easy‐to‐interpret reservoir information. However, with the recent emergence of the full‐waveform inversion technique as a more standard tool, we find it to be a promising platform for incorporating head waves and diving waves into the time‐lapse framework. Here we investigate the sensitivity of 2D acoustic, time‐domain, full‐waveform inversion for monitoring a shallow, weak velocity change (?30 m/s, or ?1.6%). The sensitivity tests are designed to address questions related to the feasibility and accuracy of full‐waveform inversion results for monitoring the field case of an underground gas blowout that occurred in the North Sea. The blowout caused the gas to migrate both vertically and horizontally into several shallow sand layers. Some of the shallow gas anomalies were not clearly detected by conventional 4D reflection methods (i.e., time shifts and amplitude difference) due to low 4D signal‐to‐noise ratio and weak velocity change. On the other hand, full‐waveform inversion sensitivity analysis showed that it is possible to detect the weak velocity change with the non‐optimal seismic input. Detectability was qualitative with variable degrees of accuracy depending on different inversion parameters. We inverted, the real 2D seismic data from the North Sea with a greater emphasis on refracted and diving waves’ energy (i.e., most of the reflected energy was removed for the shallow zone of interest after removing traces with offset less than 300 m). The full‐waveform inversion results provided more superior detectability compared with the conventional 4D stacked reflection difference method for a weak shallow gas anomaly (320 m deep).  相似文献   

6.
Multi‐offset phase analysis of seismic surface waves is an established technique for the extraction of dispersion curves with high spatial resolution and, consequently, for the investigation of the subsurface in terms of shear wave velocity distribution. However, field applications are rarely documented in the published literature. In this paper, we discuss an implementation of the multi‐offset phase analysis consisting of the estimation of the Rayleigh wave velocity by means of a moving window with a frequency‐dependent length. This allows maximizing the lateral resolution at high frequencies while warranting stability at the lower frequencies. In this way, we can retrieve the shallow lateral variability with high accuracy and, at the same time, obtain a robust surface‐wave velocity measurement at depth. In this paper, we apply this methodology to a dataset collected for hydrogeophysical purposes and compare the inversion results with those obtained by using refraction seismics and electrical resistivity tomography. The surface‐wave results are in good agreement with those provided by the other methods and demonstrate a superior capability in retrieving both lateral and vertical velocity variations, including inversions. Our results are further corroborated by the lithological information from a borehole drilled on the acquisition line. The availability of multi‐offset phase analysis data also allows disentangling a fairly complex interpretation of the other geophysical results.  相似文献   

7.
This is the first in a series of three papers focused on using variants of a logarithmic objective function approach to full waveform inversion. In this article, we investigate waveform inversion using full logarithmic principles and compare the results with the conventional least squares approach. We demonstrate theoretically that logarithmic inversion is computational similar to the conventional method in the sense that it uses exactly the same back‐propagation technology as used in least‐squares inversion. In the sense that it produces better results for each of three numerical examples, we conclude that logarithmic inversion is also more robust. We argue that a major reason for the inherent robustness is the fact that the logarithmic approach produces a natural scaling of the amplitude of the residual wavefield by the amplitude of the modelled wavefield that tends to stabilize the computations and consequently improve the final result. We claim that any superiority of the logarithmic inversion is based on the fact that it tends to be tomographic in the early stage of the inversion and more dependent on amplitude differences in the latter stages.  相似文献   

8.
Using both image and data domains to perform velocity inversion can help us resolve the long and short wavelength components of the velocity model, usually in that order. This translates to integrating migration velocity analysis into full waveform inversion. The migration velocity analysis part of the inversion often requires computing extended images, which is expensive when using conventional methods. As a result, we use pre‐stack wavefield (the double‐square‐root formulation) extrapolation, which includes the extended information (subsurface offsets) naturally, to make the process far more efficient and stable. The combination of the forward and adjoint pre‐stack wavefields provides us with update options that can be easily conditioned to improve convergence. We specifically use a modified differential semblance operator to split the extended image into a residual part for classic differential semblance operator updates and the image (Born) modelling part, which provides reflections for higher resolution information. In our implementation, we invert for the velocity and the image simultaneously through a dual objective function. Applications to synthetic examples demonstrate the features of the approach.  相似文献   

9.
Full waveform inversion is a powerful tool for quantitative seismic imaging from wide‐azimuth seismic data. The method is based on the minimization of the misfit between observed and simulated data. This amounts to the solution of a large‐scale nonlinear minimization problem. The inverse Hessian operator plays a crucial role in this reconstruction process. Accounting accurately for the effect of this operator within the minimization scheme should correct for illumination deficits, restore the amplitude of the subsurface parameters, and help to remove artefacts generated by energetic multiple reflections. Conventional minimization methods (nonlinear conjugate gradient, quasi‐Newton methods) only roughly approximate the effect of this operator. In this study, we are interested in the truncated Newton minimization method. These methods are based on the computation of the model update through a matrix‐free conjugate gradient solution of the Newton linear system. We present a feasible implementation of this method for the full waveform inversion problem, based on a second‐order adjoint state formulation for the computation of Hessian‐vector products. We compare this method with conventional methods within the context of 2D acoustic frequency full waveform inversion for the reconstruction of P‐wave velocity models. Two test cases are investigated. The first is the synthetic BP 2004 model, representative of the Gulf of Mexico geology with high velocity contrasts associated with the presence of salt structures. The second is a 2D real data‐set from the Valhall oil field in North sea. Although, from a computational cost point of view, the truncated Newton method appears to be more expensive than conventional optimization algorithms, the results emphasize its increased robustness. A better reconstruction of the P‐wave velocity model is provided when energetic multiple reflections make it difficult to interpret the seismic data. A better trade‐off between regularization and resolution is obtained when noise contamination of the data requires one to regularize the solution of the inverse problem.  相似文献   

10.
Elastic full waveform inversion of seismic reflection data represents a data‐driven form of analysis leading to quantification of sub‐surface parameters in depth. In previous studies attention has been given to P‐wave data recorded in the marine environment, using either acoustic or elastic inversion schemes. In this paper we exploit both P‐waves and mode‐converted S‐waves in the marine environment in the inversion for both P‐ and S‐wave velocities by using wide‐angle, multi‐component, ocean‐bottom cable seismic data. An elastic waveform inversion scheme operating in the time domain was used, allowing accurate modelling of the full wavefield, including the elastic amplitude variation with offset response of reflected arrivals and mode‐converted events. A series of one‐ and two‐dimensional synthetic examples are presented, demonstrating the ability to invert for and thereby to quantify both P‐ and S‐wave velocities for different velocity models. In particular, for more realistic low velocity models, including a typically soft seabed, an effective strategy for inversion is proposed to exploit both P‐ and mode‐converted PS‐waves. Whilst P‐wave events are exploited for inversion for P‐wave velocity, examples show the contribution of both P‐ and PS‐waves to the successful recovery of S‐wave velocity.  相似文献   

11.
Full waveform inversion for reflection events is limited by its linearised update requirements given by a process equivalent to migration. Unless the background velocity model is reasonably accurate, the resulting gradient can have an inaccurate update direction leading the inversion to converge what we refer to as local minima of the objective function. In our approach, we consider mild lateral variation in the model and, thus, use a gradient given by the oriented time‐domain imaging method. Specifically, we apply the oriented time‐domain imaging on the data residual to obtain the geometrical features of the velocity perturbation. After updating the model in the time domain, we convert the perturbation from the time domain to depth using the average velocity. Considering density is constant, we can expand the conventional 1D impedance inversion method to two‐dimensional or three‐dimensional velocity inversion within the process of full waveform inversion. This method is not only capable of inverting for velocity, but it is also capable of retrieving anisotropic parameters relying on linearised representations of the reflection response. To eliminate the crosstalk artifacts between different parameters, we utilise what we consider being an optimal parametrisation for this step. To do so, we extend the prestack time‐domain migration image in incident angle dimension to incorporate angular dependence needed by the multiparameter inversion. For simple models, this approach provides an efficient and stable way to do full waveform inversion or modified seismic inversion and makes the anisotropic inversion more practicable. The proposed method still needs kinematically accurate initial models since it only recovers the high‐wavenumber part as conventional full waveform inversion method does. Results on synthetic data of isotropic and anisotropic cases illustrate the benefits and limitations of this method.  相似文献   

12.
We develop a two‐dimensional full waveform inversion approach for the simultaneous determination of S‐wave velocity and density models from SH ‐ and Love‐wave data. We illustrate the advantages of the SH/Love full waveform inversion with a simple synthetic example and demonstrate the method's applicability to a near‐surface dataset, recorded in the village ?achtice in Northwestern Slovakia. Goal of the survey was to map remains of historical building foundations in a highly heterogeneous subsurface. The seismic survey comprises two parallel SH‐profiles with maximum offsets of 24 m and covers a frequency range from 5 Hz to 80 Hz with high signal‐to‐noise ratio well suited for full waveform inversion. Using the Wiechert–Herglotz method, we determined a one‐dimensional gradient velocity model as a starting model for full waveform inversion. The two‐dimensional waveform inversion approach uses the global correlation norm as objective function in combination with a sequential inversion of low‐pass filtered field data. This mitigates the non‐linearity of the multi‐parameter inverse problem. Test computations show that the influence of visco‐elastic effects on the waveform inversion result is rather small. Further tests using a mono‐parameter shear modulus inversion reveal that the inversion of the density model has no significant impact on the final data fit. The final full waveform inversion S‐wave velocity and density models show a prominent low‐velocity weathering layer. Below this layer, the subsurface is highly heterogeneous. Minimum anomaly sizes correspond to approximately half of the dominant Love‐wavelength. The results demonstrate the ability of two‐dimensional SH waveform inversion to image shallow small‐scale soil structure. However, they do not show any evidence of foundation walls.  相似文献   

13.
We have previously applied three‐dimensional acoustic, anisotropic, full‐waveform inversion to a shallow‐water, wide‐angle, ocean‐bottom‐cable dataset to obtain a high‐resolution velocity model. This velocity model produced an improved match between synthetic and field data, better flattening of common‐image gathers, a closer fit to well logs, and an improvement in the pre‐stack depth‐migrated image. Nevertheless, close examination reveals that there is a systematic mismatch between the observed and predicted data from this full‐waveform inversion model, with the predicted data being consistently delayed in time. We demonstrate that this mismatch cannot be produced by systematic errors in the starting model, by errors in the assumed source wavelet, by incomplete convergence, or by the use of an insufficiently fine finite‐difference mesh. Throughout these tests, the mismatch is remarkably robust with the significant exception that we do not see an analogous mismatch when inverting synthetic acoustic data. We suspect therefore that the mismatch arises because of inadequacies in the physics that are used during inversion. For ocean‐bottom‐cable data in shallow water at low frequency, apparent observed arrival times, in wide‐angle turning‐ray data, result from the characteristics of the detailed interference pattern between primary refractions, surface ghosts, and a large suite of wide‐angle multiple reflected and/or multiple refracted arrivals. In these circumstances, the dynamics of individual arrivals can strongly influence the apparent arrival times of the resultant compound waveforms. In acoustic full‐waveform inversion, we do not normally know the density of the seabed, and we do not properly account for finite shear velocity, finite attenuation, and fine‐scale anisotropy variation, all of which can influence the relative amplitudes of different interfering arrivals, which in their turn influence the apparent kinematics. Here, we demonstrate that the introduction of a non‐physical offset‐variable water density during acoustic full‐waveform inversion of this ocean‐bottom‐cable field dataset can compensate efficiently and heuristically for these inaccuracies. This approach improves the travel‐time match and consequently increases both the accuracy and resolution of the final velocity model that is obtained using purely acoustic full‐waveform inversion at minimal additional cost.  相似文献   

14.
基于对数目标函数的跨孔雷达频域波形反演   总被引：2，自引：1，他引：1       下载免费PDF全文
波形反演在探地雷达领域的应用已有十余年历史,但绝大部分算例属于时间域波形反演.频率域波形反演由于能够灵活地选择迭代频率并可以使用不同类型的目标函数,因而更加多样化.本文的频率域波形反演基于时间域有限差分(FDTD)法,采用对数目标函数,可在每一次迭代过程中同时或者单独反演介电常数和电导率.文中详细推导了频率域波形反演的理论公式,给出对数目标函数下的梯度表达式,并使用离散傅氏变换(DFT)实现数据的时频变换,能够有效地减少大模型反演的内存需求.在后向残场源的时频域转换过程中,提出仅使用以当前频点为中心的一个窄带数据,可以消除高频无用信号的干扰,获得可靠的反演结果.为加速收敛,采用每迭代十次则反演频率跳跃一定频带宽度的反演策略.实验证明适当的频率跳跃能够在不降低分辨率的基础上有效地提高反演效率.通过两组不同情形下合成数据反演的分析对比,证明基于对数目标函数的波形反演结果准确可靠.最后,将该方法应用到一组实际数据,得到较好的反演结果.  相似文献   

15.
Elastic waves, such as Rayleigh and mode‐converted waves, together with amplitude versus offset variations, serve as noise in full waveform inversion using the acoustic approximation. Heavy preprocessing must be applied to remove elastic effects to invert land or marine data using the acoustic inversion method in the time or frequency domains. Full waveform inversion using the elastic wave equation should be one alternative; however, multi‐parameter inversion is expensive and sensitive to the starting velocity model. We implement full acoustic waveform inversion of synthetic land and marine data in the Laplace domain with minimum preprocessing (i.e., muting) to remove elastic effects. The damping in the Laplace transform can be thought of as an automatic time windowing. Numerical examples show that Laplace‐domain acoustic inversion can yield correct smooth velocity models even with the noise originating from elastic waves. This offers the opportunity to develop an accurate smooth starting model for subsequent inversion in the frequency domain.  相似文献   

16.
Waveform inversion met severe challenge in retrieving long‐wavelength background structure. We have proposed to use envelope inversion to recover the large‐scale component of the model. Using the large‐scale background recovered by envelope inversion as new starting model, we can get much better result than the conventional full waveform inversion. By comparing the configurations of the misfit functional between the envelope inversion and the conventional waveform inversion, we show that envelope inversion can greatly reduce the local minimum problem. The combination of envelope inversion and waveform inversion can deliver more faithful and accurate final result with almost no extra computation cost compared to the conventional full waveform inversion. We also tested the noise resistance ability of envelope inversion to Gaussian noise and seismic interference noise. The results showed that envelope inversion is insensitive to Gaussian noise and, to a certain extent, insensitive to seismic interference noise. This indicates the robustness of this method and its potential use for noisy data.  相似文献   

17.
We extend the frequency‐ and angle‐dependent poroelastic reflectivity to systematically analyse the characteristic of seismic waveforms for highly attenuating reservoir rocks. It is found that the mesoscopic fluid pressure diffusion can significantly affect the root‐mean‐square amplitude, frequency content, and phase signatures of seismic waveforms. We loosely group the seismic amplitude‐versus‐angle and ‐frequency characteristics into three classes under different geological circumstances: (i) for Class‐I amplitude‐versus‐angle and ‐frequency, which corresponds to well‐compacted reservoirs having Class‐I amplitude‐versus‐offset characteristic, the root‐mean‐square amplitude at near offset is boosted at high frequency, whereas seismic energy at far offset is concentrated at low frequency; (ii) for Class‐II amplitude‐versus‐angle and ‐frequency, which corresponds to moderately compacted reservoirs having Class‐II amplitude‐versus‐offset characteristic, the weak seismic amplitude might exhibit a phase‐reversal trend, hence distorting both the seismic waveform and energy distribution; (iii) for Class‐III amplitude‐versus‐angle and ‐frequency, which corresponds to unconsolidated reservoir having Class‐III amplitude‐versus‐offset characteristic, the mesoscopic fluid flow does not exercise an appreciable effect on the seismic waveforms, but there exists a non‐negligible amplitude decay compared with the elastic seismic responses based on the Zoeppritz equation.  相似文献   

18.
The wavefield in the Laplace domain has a very small amplitude except only near the source point. In order to deal with this characteristic, the logarithmic objective function has been used in many Laplace domain inversion studies. The Laplace-domain waveform inversion using the logarithmic objective function has fewer local minima than the time- or frequency domain inversion. Recently, the power objective function was suggested as an alternative to the logarithmic objective function in the Laplace domain. Since amplitudes of wavefields are very small generally, a power <1 amplifies the wavefields especially at large offset. Therefore, the power objective function can enhance the Laplace-domain inversion results. In previous studies about synthetic datasets, it is confirmed that the inversion using a power objective function shows a similar result when compared with the inversion using a logarithmic objective function. In this paper, we apply an inversion algorithm using a power objective function to field datasets. We perform the waveform inversion using the power objective function and compare the result obtained by the logarithmic objective function. The Gulf of Mexico dataset is used for the comparison. When we use a power objective function in the inversion algorithm, it is important to choose the appropriate exponent. By testing the various exponents, we can select the range of the exponent from 5 × 10?3 to 5 × 10?8 in the Gulf of Mexico dataset. The results obtained from the power objective function with appropriate exponent are very similar to the results of the logarithmic objective function. Even though we do not get better results than the conventional method, we can confirm the possibility of applying the power objective function for field data. In addition, the power objective function shows good results in spite of little difference in the amplitude of the wavefield. Based on these results, we can expect that the power objective function will produce good results from the data with a small amplitude difference. Also, it can partially be utilized at the sections where the amplitude difference is very small.  相似文献   

19.
反射地震数据的逐层波形反演   总被引：10，自引：2，他引：8       下载免费PDF全文
本文针对层状介质并结合梯度法波形反演,提出逐层波形反演的方法. 首先给出介质扰动响应的概念,并在此基础上分析了梯度法波形反演方法. 波形反演实质上是将实测地震记录和预测地震记录的波形残差信息转化为实际地质模型和预测地质模型的模型残差信息. 波形反演的优点是利用大量振幅相位信息得到高分辨率的反演结果, 其缺点是运行耗时大;当初始模型和实际模型相差较大时,迭代算法容易陷入局部极小点,这是因为目标函数和初始模型同实际模型间的差异是非线性的关系. 逐层波形反演方法是使自上而下每一层的目标函数最小,这样总的目标函数也是最小的. 利用二分法速度扫描确定每一层速度不仅提高了运算速度也避免了迭代算法陷入局部极小点的问题. 结合介质扰动响应和目标函数值变化可以更为准确迅速地确定每一层速度和该层界面位置.  相似文献   

20.
In this paper, a method is proposed to invert permeability from seismoelectric logs in fluid‐saturated porous formations. From the analysis of both the amplitude and the phase of simulated seismoelectric logs, we find that the Stoneley wave amplitude of the ratio of the converted electric field to the pressure (REP) is sensitive to porosity rather than permeability while the tangent of the REP's phase is sensitive to permeability. The REP's phase reflects the phase discrepancy between the electric field and the pressure at the same location in the borehole. We theoretically derive the frequency‐dependent expression of the REP of the low‐frequency Stoneley wave and find that the tangent of the REP's argument is approximately in inverse proportion to permeability. We obtain an inversion formula and present the permeability inversion method by using the tangent of the REP's phase. To test this method, the permeabilities of different sandstones are inverted from the synthetic full‐waveform data of seismoelectric logs. A modified inversion process is proposed based on the analysis of inversion errors, by which the relative errors are controlled below 25% and they are smaller than those of the permeability inversion from the Stoneley wave of acoustic logs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号