共查询到20条相似文献，搜索用时 31 毫秒
1.
Zhang Liaoyuan Qu Zhanqing Zhai Mingyang Li Aishan Huang Bo Zhang Zilin 《Geotechnical and Geological Engineering》2021,39(2):839-854
Tight heterogeneous glutenite reservoir is typically not easy to form complex hydraulic fracture (HF) due to its poor physical properties, poor matrix seepage capacity, and small limit discharge radius and undeveloped natural fracture system. To improve the HF complexity and the stimulated reservoir volume (SRV), a novel stimulation technology called CO2 miscible fracturing has been introduced and its fracturing mechanism has been studied. The CO2 miscible fracturing modifies the in situ stress field by injecting low viscosity fluid to increase the HF complexity and SRV. Therefore, a series of numerical simulations based on a hydro-mechanical-damage model were carried out to study the effects of low viscosity fluid pre-injection on pore pressure, stress field, and fracturing effect in tight heterogeneous glutenite reservoirs. The results indicate that the low viscosity fluid injection can effectively increase the pore pressure around the wellbore and reduce the effective stress of the glutenite. The FCI and SRV increase with the increase of the pre-injection amount of the low viscosity fluid. The HF complexity and SRV can be improved by pre-injecting low viscosity fluid to transform the in situ stress field. The field application of this technology in a well of Shengli Oilfield showed that low-viscosity fluid pre-injection can effectively increase the width of the fractured zone, improve the SRV, and optimize the fracturing effect.
相似文献2.
水力压裂是低渗油气藏的主要开发手段,传统数值模型所得到的基质-裂缝窜流量以及断裂参数精度不足.为此以流固耦合理论与断裂力学相结合的压裂模型为基础,模拟了水力裂缝扩展过程.在模型中分别引入离散裂缝模型和广义J积分计算基质-裂缝流量交换和断裂参数,并采用动态网格技术对裂缝尖端进行局部加密,以提高模拟的效率和精度.模型计算结果显示,影响水力压裂过程的主要参数中:基质渗透率和压裂液粘度主要影响水力裂缝的最终形态;岩石弹性模量影响裂缝宽度.对压裂车而言,最高工作压力一般都能够满足压裂增产需求,其最大输出功率和最大输出流量是限制压裂能力的主要因素. 相似文献
3.
在稠油油藏开发中,由于原油黏度高一般采用注蒸汽开采。基于连续介质力学理论,考虑了热对流的影响,建立了蒸汽注入条件下对地层压力、变形和有效应力定量评价的改进的热-流体-力学耦合数学模型;应用全隐式顺序Galerkin有限元数值解方案对注蒸汽井热-流体-力学耦合过程进行了数值模拟。计算结果表明,由于地层流体高温膨胀引起的高压力,会导致位移、变形,甚至地层结构破裂;温度对地层破裂形态的影响显著。研究表明,这个改进模型比传统模型更加准确、实用,可以用于蒸汽注入速率优化和油藏、地质、热-流动力反应、地应力水平等综合作用效应研究。 相似文献
4.
随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。 相似文献
5.
The hydraulic fracturing technique has been widely applied in many fields, such as the enhanced geothermal systems (EGS), the improvement of injection rates for geologic sequestration of CO2, and for the stimulations of oil and gas reservoirs. The key points for the success of hydraulic fracturing operations in unconventional resources are to accurately estimate the redistribution of pore pressure and stresses around the induced fracture and predict the reactivations of preexisting natural fractures. The pore pressure and stress regime around hydraulic fracture are affected by poroelastic and thermoelastic phenomena as well as by fracture opening compression. In this work, a comprehensive semi-analytical model is used to estimate the stress and pore pressure distribution around an injection-induced fracture from a single well in an infinite reservoir. The model allows the leak-off distribution in the formation to be three-dimensional with the pressure transient moving ellipsoidically outward into the reservoir from the fracture surface. The pore pressure and the stress changes in three dimensions at any point around the fracture caused by poroelasticity, thermoelasticity, and fracture compression are investigated. With Mohr-Coulomb failure criterion, we calculate the natural fracture reactivations in the reservoir. Then, two case studies of constant water injection into a hydraulic fracture are presented. This work is of interest in the interpretation of microseismicity in hydraulic fracturing and in the estimation of the fracture spacing for hydraulic fracturing operations. In addition, the results from this study can be very helpful for the selection of stimulated wells and further design of the refracturing operations. 相似文献
6.
新疆油田某地区油藏的储隔层岩性组合复杂,呈现突出的薄互层产状特征,研究合、分压判断条件有利于提高压裂效率,增强储层动用程度与压后改造效果。水力裂缝在薄互层中的穿层与裂缝扩展行为受薄互层地质特征与压裂施工参数的影响。基于此,开展了薄互层物理模型压裂试验,研究界面胶结、岩层分布、岩层厚度、压裂液黏度与注液排量对薄互层中水力裂缝垂向扩展的影响分析。试验结果表明：薄互层的地层特征界面胶结与岩层分布是水力裂缝垂向扩展的主要控制因素,界面胶结强度对裂缝垂向扩展行为的影响强于岩层分布;由于弱胶结界面的存在,水力裂缝垂向扩展穿层时可发生方向偏转,抑制裂缝垂向扩展;提高压裂液黏度与注液排量有利于薄互层中水力裂缝的穿层垂向扩展。 相似文献
7.
水力压裂扩展特性的数值模拟研究 总被引：7，自引：0，他引：7
采用ABAQUS建立了水力压裂计算模型,模拟了地应力、岩石力学特性、压裂液流体特性等各种复杂因素对水力压裂扩展的影响。通过计算分析得到一些有益结论：（1）在注入压力一定的情况下起裂压力与最小水平地应力、临界应力、初始孔隙压力成正比,而与压裂液黏度、最大水平地应力、弹性模量无关;（2）裂缝扩展长度和最大缝宽与最小水平地应力、初始孔隙压力、弹性模量成反比,而与最大水平地应力无关;（3）水力压裂作业中,缝长的扩展过程可分为无扩展阶段、快速扩展阶段、稳定扩展阶段以及缓慢扩展阶段等4个阶段。研究结论对于水力压裂作业优化具有参考价值。 相似文献
8.
裂隙是油气储层主要的储集空间及流体渗流通道,影响油气的运移规律,是油气勘探开发的重要指标。以冀中坳陷任丘油田任10井为例,运用数值模拟方法研究了裂隙开展宽度和裂隙面粗糙度对岩石渗流特性的影响规律。研究结果表明,(1)裂隙开展宽度较小时,孔隙内流体压力仅在入口处小范围内呈扇形分布,裂隙中压力分布曲线呈正切函数型,流体流速在裂隙和孔隙中都较小;随着裂缝开展宽度的增加,孔隙内流体压力逐渐增大,裂隙中压力分布曲线逐渐向直线型转变,流体流速在入口处先减小后稳定,在裂隙中先增加后稳定;(2)裂隙面粗糙度对裂隙岩石渗流特性的影响与裂隙开展宽度有关,在裂隙开展宽度较大时,裂隙面粗糙度对流体压力的分布影响较大;随着裂隙面粗糙度增大,孔隙内流速逐渐增大,而裂隙中流速逐渐减小;(3)随着裂隙开展宽度的增大,影响裂隙流体流动的主控因素逐渐由裂隙开展宽度转变为裂隙面粗糙度。 相似文献
9.
荷载作用下土体气压劈裂效果试验研究 总被引：2，自引：0，他引：2
采用自行研制的模型试验装置进行了不同喷气压力和上覆荷载下土体的气压劈裂室内模型试验,分析了喷气压力和上覆荷载对土体气压劈裂效果的影响。试验结果表明,向土体中喷入高压气体能在土体中产生裂隙,裂隙可加速超静孔隙水压的消散;喷气结束时裂隙宽度达到最大值,喷气结束后裂隙不完全闭合,残余裂隙宽度为裂隙宽度峰值的1/100。对比不同喷气压力和上覆荷载作用下气压劈裂试验结果发现,气压劈裂影响范围与裂隙宽度均和喷气压力与上覆荷载大小密切相关,其中喷气压力对气压劈裂影响范围与裂隙宽度的影响更为显著;气压劈裂影响范围与喷气压力呈双曲线相关关系,裂隙宽度与喷气压力呈线性正相关关系;气压劈裂影响范围随上覆荷载增加而减小,裂隙宽度与上覆荷载呈线性负相关关系 相似文献
10.
Yongquan Hu Zhiqiang Li Jinzhou Zhao Zhengwu Tao Pan Gao 《Environmental Earth Sciences》2017,76(15):546
The ultra-low-permeability shale gas reservoir has a lot of well-developed natural fractures. It has been proven that hydraulic fracture growth pattern is usually a complex network fracture rather than conventional single planar fractures by micro-seismic monitoring, which can be explained as the shear and tensile failure of natural fractures or creation of new cracks due to the increase in reservoir pore pressure caused by fluid injection during the process of hydraulic fracturing. In order to simulate the network fracture growth, a mathematical model was established based on full tensor permeability, continuum method and fluid mass conservation equation. Firstly, the governing equation of fluid diffusivity based on permeability tensor was solved to obtain the reservoir pressure distribution. Then Mohr–Coulomb shear failure criterion and tensile failure criterion were used to decide whether the rock failed or not in any block on the basis of the calculated reservoir pressure. The grid-block permeability was modified according to the change of fracture aperture once any type of rock failure criterion was met within a grid block. Finally, the stimulated reservoir volume (SRV) zone was represented by an enhancement permeability zone. After calibrating the numerical solution of the model with the field micro-seismic information, a sensitivity study was performed to analyze the effects of some factors including initial reservoir pressure, injection fluid volume, natural fracture azimuth angle and horizontal stress difference on the SRV (shape, size, bandwidth and length). The results show that the SRV size increases with the increasing initial pore reservoir and injection fluid volume, but decreases with the increase in the horizontal principal stress difference and natural fracture azimuth angle. The SRV shape is always similar for different initial pore reservoir and injection fluid volume. The SRV is observed to become shorter in length and wider in bandwidth with the decrease in natural fracture azimuth angle and horizontal principal stress difference. 相似文献
11.
用流固耦合方法研究油藏压裂后应力应变和孔渗特性变化 总被引：10，自引：1，他引：10
油藏压裂后将引起地应力场发生变化，使岩石变形，导致孔隙度和渗透率变化，进而影响产量，为研究这一问题，作者建立了油藏压裂后流－固耦合渗流模型，考虑了以下因素：油藏岩石变形，地应力，孔隙度和渗透率变化，人工裂缝，流体渗流与岩石应变耦合，储藏渗流与裂缝渗流耦合，非达西效应等。较详细地给出了耦合方程及推导过程，控制方程包括的未知变量有压力，饱和度及位移，11个变量，和11个方程，用有限差分方法将流体渗流和岩石应变方程离散成主对角占优的七对角矩阵，可在修改已有三维二相渗流和三维固体力学程序的基础上，采用隐式迭代方法求解，示例分析表明，用此模型可以研究储层应力变变，孔隙度和渗透率随时间和空间变化规律，为开发方案制定，整体压裂设计，压后生产管理等方面提供定量分析技术。 相似文献
12.
超临界CO2流体具有低黏度、无表面张力的特性,若应用于非常规油气储层压裂可望实现一种无污染的新型无水压裂方法。通过建立流体在井筒内的增压速率模型,得到了考虑超临界CO2流体黏度、压缩性及增压速率的裂缝起裂压力预测模型,并与水力压裂、液态CO2压裂起裂压力进行了对比分析。结果表明,超临界CO2流体的起裂压力比液态CO2流体低20.5 %,比常规水力压裂起裂压力低75.5%;超临界CO2流体的黏度、压缩性及增压速率对裂缝起裂压力影响显著。模型与文献中试验数据对比,误差在3%以内,可为超临界CO2压裂起裂压力预测提供指导。 相似文献
13.
超深储层地层起裂压力较高,水力压裂受现场泵注设备的限制严重,文中重点研究了大尺度水力压裂物模实验水泥样品尺寸（762 mm×762 mm×914 mm）在循环和常规两种泵注条件下的起裂扩展和声发射规律。实验结果显示,（1）相对于普通泵注,采用循环泵注方式进行水力压裂可以有效降低起裂压力,类似于单轴和三轴循环加载岩石力学行为,都是由于循环加载引起疲劳损伤;（2）对于螺旋射孔完井方式,水力压裂裂缝只从最薄弱射孔处起裂,一旦起裂后其他射孔孔眼很难再开启,水力压裂现场应合理选择分段距离和簇间距,实现储层改造效率最优化;（3）循环泵注水力压裂存在Kaiser效应（当加载应力到前次加载最高应力值时出现的声发射信息）。因孔隙流体扩散到岩石并导致孔隙压力的局部上升,破坏模式仍然可以由摩尔圆表示。研究成果对循环泵注条件的裂缝扩展规律研究以及发展新型压裂改造技术具有重要意义。 相似文献
14.
射孔作为井筒与储层之间的液流通道,是水力压裂过程中的重要可控性参数。为研究水平井射孔-近井筒破裂机制,采用岩层变形-流体渗流方程描述应力状态变化,应用连续损伤破裂单元表征三维破裂位置与形态演化,并开发有限元求解程序模拟分析了射孔对水平井初始破裂压力、破裂位置及近井筒裂缝复杂性的调控作用。通过与解析模型及射孔压裂物理模型试验结果对比,验证了模型及有限元程序的有效性;水平井破裂压力数值分析结果与现场测试数据吻合较好。研究表明：射孔可调控水平井破裂压力与初始破裂位置,同时对近井筒区域裂缝扩展形态影响显著。通过优化射孔参数可以引导初始破裂向最优破裂面扩展、有效降低破裂压力,减小由于螺旋射孔空间排布引起的水平井近井筒裂缝迂曲与复杂程度,提高致密油气藏压裂改造效果。 相似文献
15.
人工压裂是获取干热岩型地热资源的关键环节,压裂后的人工裂隙带结构对开采条件下水热传递过程具有重要控制作用。结合我国共和盆地干热岩储层地质条件,采用数值模拟方法着重分析干热岩不同产状人工裂隙带的渗透率与宽度对热储中水热传递过程的影响机理,明确不同人工裂隙结构条件下水热产出能力,进而优化井间距。结果表明:当人工裂隙带渗透率较小时（小于5 D）,裂隙带规模越大,开采井温度越高;当渗透率较大时（大于10 D）,在水平裂隙带中,随着裂隙带规模的增加,由于注入冷水的快速扩散导致整体低温区域增加,开采井温度反而降低。在水平裂隙带中注入冷水主要为水平向流动,随着渗透率的增加,开采井温度更易受注入冷水的影响而降低;但在垂直裂隙带及倾斜裂隙带中,随着渗透率的增加,垂向自由对流增强,注入冷水更易于向储层底部高温区域流动,经加热后到达开采井,使得开采温度提升。综合比较,同一井间距条件下,低渗水平裂隙带以及高渗垂直裂隙带的产热能力较其他裂隙带更强。 相似文献
16.
A three-phase hydro-mechanical model for hydraulic fracturing is proposed. Three phases include: porous solid, fracturing fluid and host fluid. Discontinuity is handled using extended finite element method (XFEM) while cohesive crack model is used as fracturing criterion. Flow through fracture is defined as one-dimensional laminar flow, and flow through porous medium (host reservoir) is defined as two-dimensional Darcy flow. Coupling between two fluids in each space, fracture and pore, is captured through capillary pressure–saturation relationship, while the identical fluids in fracture and pore are coupled through a so-called leak-off mass transfer term. Coupling between fluids and deformation is captured through compatibility of volumetric strain of fluids within fracture and pore, and volumetric strain of the matrix. Spatial and temporal discretisation is achieved using the standard Galerkin method and the finite difference technique, respectively. The model is verified against analytical solutions available from literature. The leaking of fracturing fluid into the medium and suction of porous fluid into the fracture around the tip, are investigated. Sensitivity analyses are carried out for cases with slow and fast injection rates. It is shown that the results by single-phase flow may underestimate the leak-off. 相似文献
17.
综合压裂技术在低压致密气藏储层中的研究与应用 总被引：1，自引：0，他引：1
大牛地气田储层属于低压致密气层,非均质性强、孔喉直径小、毛管压力高、多层叠置且层间跨度不等导致储层保护和加砂压裂难度大。通过研究提出了采用液氮增能低伤害压裂液体系,降低对储层的伤害,有效地保护了储层;采用大型加砂压裂技术,增加了裂缝长度,扩大了泄气面积,提高了单层产量,气产量由200 m3/d提高到7.23×104 m3/d;采用不动管柱连续分层压裂工艺技术实现了多层叠置气层均衡改造,压裂投产作业时间缩短了近67%,费用降低了20.69%。 相似文献
18.
超临界CO2是一种介于气体和液体之间的特殊状态的CO2流体,具有低黏、高扩散性和零表面张力等独特的性质。利用超临界CO2作为压裂液,有助于裂缝的起裂和扩展,同时可避免储层伤害。通过研究超临界CO2射流破岩和压裂特性,分析得到了超临界CO2岩石致裂机制。研究结果表明,超临界CO2低黏等特性使其更容易进入岩石微孔和微缝之中,在岩石内部建立大小不一的流体压力系统,使岩石发生拉伸和剪切破坏;常规流体压裂起裂压力较高,裂缝一般为单条或多条平直裂缝,大多沿着同一方向贯穿强度较高的胶结颗粒,且裂缝断面光滑、平整;超临界CO2压裂起裂压力相比于常规流体压裂低,在岩石中形成的裂缝网络较为复杂,裂缝互相连通,一般沿着强度较低的胶结物开裂,较少贯穿胶结颗粒,裂缝断面较为粗糙。该研究结果可为超临界CO2压裂技术的实施提供理论支撑。 相似文献
19.
压裂施工曲线是反映压裂效果的重要依据,而压裂阶段储层渗透率的动态变化能够更直观地反映造缝效果。借鉴试井渗透率测试原理,建立一种压裂阶段储层动态渗透率定量评价方法,并将该方法应用到准南某区块2口煤层气井水力压裂效果评价中,获得压裂阶段储层动态渗透率曲线;同时采用G函数对压裂效果进一步评价。结果表明:动态渗透率曲线所反映压裂效果与G函数分析和基于排量、井底流压关系的评价结果吻合较好,能够反映储层内裂缝开启、延伸效果;其中,CMG-01井通过实施煤储层与围岩大规模缝网改造,压裂阶段储层渗透率最高达到2.5 μm2,造缝效果良好;而CBM-02井实施煤储层常规水力压裂,储层渗透率保持在1.8 μm2之下,显示出煤储层常规水力压裂与煤储层?围岩大规模缝网改造的差异性。动态渗透率定量评价方法弥补前期压裂改造效果缺乏量化评价的不足,为煤层气/煤系气储层水力压裂工艺的优化提供依据。 相似文献
20.
松辽盆地朝长地区扶杨油层是典型的低孔低渗砂岩储层,需要进行压裂改造,产能影响因素较多,用常规线性方法进行的产能预测结果往往精度不够。在研究该区测井曲线响应特征的基础上,根据地区经验和灰色关联分析法,优选自然伽马、声波、电阻率、中子和密度5 个测井特征参数,及含砂比、破裂压力2 个压裂施工参数,与已有的试油结论作为模型的训练样本,建立预测储层压裂改造后单位厚度产液量和单位厚度产油量的BP 神经网络模型。在实际应用过程中,不仅能较准确地划分油水层,同时给出了产油量的计算参考值,实现了对低孔低渗砂岩储层压裂产能的有效快速预测。 相似文献