共查询到18条相似文献，搜索用时 171 毫秒
1.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
2.
随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。 相似文献
3.
水力压裂扩展特性的数值模拟研究 总被引：7，自引：0，他引：7
采用ABAQUS建立了水力压裂计算模型,模拟了地应力、岩石力学特性、压裂液流体特性等各种复杂因素对水力压裂扩展的影响。通过计算分析得到一些有益结论：（1）在注入压力一定的情况下起裂压力与最小水平地应力、临界应力、初始孔隙压力成正比,而与压裂液黏度、最大水平地应力、弹性模量无关;（2）裂缝扩展长度和最大缝宽与最小水平地应力、初始孔隙压力、弹性模量成反比,而与最大水平地应力无关;（3）水力压裂作业中,缝长的扩展过程可分为无扩展阶段、快速扩展阶段、稳定扩展阶段以及缓慢扩展阶段等4个阶段。研究结论对于水力压裂作业优化具有参考价值。 相似文献
4.
为了研究煤岩水力压裂的起裂压力和水力压裂裂缝扩展规律,采用型煤试样,利用自主研发的水力压裂实验系统,参照现场压裂施工制定了“施加三向应力-顶部注水”的煤岩水力压裂物理模拟实验方案并开展了水力压裂实验,分析了不同条件下泵注压力和水力压裂裂缝。实验结果表明:压裂液泵注排量越大,起裂压力越大。三向应力满足最大水平主应力σH > 垂向应力σv > 最小水平主应力σh,水力压裂裂缝沿着垂直于σh的方向扩展。σv和σh一定,随着σH的增大,煤岩起裂压力先增大后减小,水力压裂裂缝扩展路径越平直。当σH远大于σv和σh时,水力压裂裂缝扩展路径越复杂,分叉缝角度越大。研究结果可为煤岩水力压裂理论的完善提供一定的参考和借鉴。 相似文献
5.
《岩土力学》2019,(11):4543-4553
利用最大周向应变断裂准则,基于裂纹扩展增量法模拟水力裂缝扩展过程。数值模拟结果表明,上述裂缝扩展方法能有效模拟水力裂缝扩展过程。在此基础上利用该方法分析了定向射孔水力裂缝初始起裂水压、扩展路径和裂缝"偏转角"受射孔长度与倾角、地应力差、泊松比和注水压力的影响。通过预测裂缝初始起裂水压和扩展路径,可以优化选择合适的射孔参数。减小地应力差有助于降低裂缝起裂水压,同时可以使裂缝在扩展过程中沟通更大的有效储层。泊松比在临界荷载条件下对裂缝起裂特性产生显著影响,但是在高水压条件下对裂缝扩展路径无明显影响。敏感性分析表明,射孔倾角是影响压裂效果的关键性因素。对上述多因素的影响分析可以为定向射孔水力压裂设计与施工提供重要的参考依据。 相似文献
6.
针对高角度天然裂缝发育地层中的水平井水力压裂问题,开展了水力裂缝自天然裂缝处起裂扩展的理论和试验研究。尝试将天然裂缝简化为与井筒轴线垂直的横向裂缝,基于线弹性断裂力学理论和最大拉应力准则,给出了水力裂缝起裂压力和扩展过程中应力强度因子的计算方法。利用预制横缝模拟高角度天然裂缝,开展了室内水力压裂试验,对水力裂缝的扩展形态和起裂压力进行了研究。理论计算表明,（1）水力裂缝自预制横缝端部起裂后,扩展距离超过1倍的预制横缝端部半径时可将预制横缝和水力裂缝合并起来,整体视作一条横向裂缝来计算应力强度因子;（2）水力裂缝尖端距井壁处的距离大于4倍的井筒半径时,应力强度因子的计算可忽略井筒的影响,近似采用硬币形裂缝的计算公式。试验研究发现,（1）水力裂缝在预制横缝端部起裂并扩展,形成与井筒轴线垂直的横向裂缝,裂缝的扩展呈现出Ⅰ型断裂的特点,形态近似呈圆形,未发现与井筒轴线平行的纵向裂缝的起裂和扩展;（2）排量对破裂净压力和起裂净压力有重要影响,大排量会导致较高的破裂净压力和起裂净压力,在大、小两种排量下起裂净压力的离散性均较小,计算得到的KⅠ临界断裂值的离散性也较小。研究结果可为改善裂缝发育储层的近井裂缝形态提供指导,也可为煤矿开采中预制横向切槽的水力压裂设计提供参考。 相似文献
7.
水力压裂可显著提高页岩气等致密储层岩体的渗透性以增加油气产量,然而受多因素影响,水力压裂形成缝网结构的机理和压裂优化设计一直是研究的焦点和难点。本研究基于渗流-应力-破坏耦合计算模拟方法,对不同水力加载条件下的非均质储层水力压裂过程进行了模拟和对比研究。研究结果表明:水力压裂过程中起始注水压力和增量大小对水力压裂缝网扩展和改造区域形态有着显著的影响。当起始注水压力小于等于模型材料体抗拉强度,并缓慢增压致裂时,压裂过程可近似视为稳态应力-破坏-渗流耦合作用过程的不同阶段,这种情况下仅在压裂井孔周围形成两组对称式的伞状水力裂缝带。当对模型体施加高于模型材料体破裂压力的注水压力时,相当于对压裂孔快速施加高动水压力,水力裂缝沿压裂孔全方位迅速萌生并快速扩展,当注水压力值高于破裂压力一定幅值时,压裂改造可形成围绕压裂井全方位的放射状裂缝网络,使压裂储层得以最大范围改造。在拟静力和拟动力两种加载条件下,不同水岩相互作用机理是造成不同水力加载条件出现不同缝网结构的力学机制,而对于实际的页岩气储层改造,压裂产生围绕压裂井全方位放射状的缝网结构则是一种最优的体积压裂改造。 相似文献
8.
定面射孔技术是为了提高体积压裂改造效果而提出的一种新的射孔方案。根据岩石力学及流-固耦合理论,建立了定面射孔地层的三维弹塑性流固-耦合地应力模型,采用数值方法进行求解,结合最大拉应力准则,研究了定面射孔水力裂缝的起裂规律。经过大量计算发现：定面射孔条件下,裂缝首先在射孔面内的射孔眼起裂,然后射孔眼相互贯通而形成扇形裂缝面,增大了水力裂缝的波及体积及井筒的连通性;同一平面内两侧孔眼在中间孔眼上产生的附加应力降低了Y方向主应力而增大了X方向和Z方向主应力,导致正断层采用定面射孔时,起裂压力较大,起裂压力随射孔方位角的增大而降低,只有当射孔方位角大于60°时,定面射孔起裂压力低于螺旋射孔起裂压力;对于逆断层,射孔方位角越小,起裂压力越低,且均低于螺旋射孔起裂压力;减小射孔间夹角、增大射孔直径及深度均可降低起裂压力。 相似文献
9.
页岩储层孔隙度和渗透率极低,天然裂缝和水平层理发育,常规压裂增产措施无法满足页岩气的开发要求,水平井多段分簇压裂是页岩气开发的关键技术之一,该技术能够大幅度提升压裂改造的体积、产气量和最终采收率。为确定页岩储层水平井多段分簇射孔压裂的起裂点和起裂压力,采用有限元方法建立了水平井套管完井（考虑水泥环和套管的存在）多段分簇射孔的全三维起裂模型。数值模型的起裂压力与室内试验结果吻合较好,证明了数值模型的准确性和可靠性。利用数值模型研究了页岩水平井多段分簇射孔压裂的起裂点和起裂压力的影响因素,研究发现：射孔孔眼附近无天然裂缝或水平层理影响,起裂点发生在射孔簇孔眼的根部;射孔簇间距越小,中间射孔簇的干扰越大,可能造成中间的射孔簇无法起裂;射孔密度和孔眼长度增大,起裂压力降低;天然裂缝的存在,在某些情况能够降低起裂压力且改变起裂位置,主要与天然裂缝的分布方位及水平主应力差有关;水平层理可能会降低起裂压力,但与垂向主应力与水平最小主应力的差值有关。获得的起裂压力变化规律,可作为进一步研究水平井多段分簇射孔条件下的裂缝扩展规律的基础,可以为压裂设计和施工的射孔参数确定及优化给出具体建议。 相似文献
10.
水力压裂技术广泛使用于页岩气开采工程中。为了分析压裂过程中多裂缝扩展形成复杂裂缝网的机制,尝试将态型近场动力学理论引入页岩水平井水力压裂过程的力学建模与数值仿真,在物质点间相互作用力模型中加入等效水压力项以实现在新生裂缝面上跟踪施加水压力,建立了水力压裂过程的近场动力学分析模型。通过模拟页岩储层的水力压裂过程,可得到复杂的裂缝扩展路径、裂缝网络的形成过程以及裂缝扩展受射孔间距及页岩天然裂缝和层理的影响。研究结果表明:射孔间距过小会造成起裂干扰,使中心射孔的裂缝扩展受到抑制;在压裂压力一定的情况下适当增大射孔间距,可以显著增强页岩压裂形成裂缝网的能力;压裂过程中水平层理面可能张开形成水平裂缝,且天然裂缝会诱导形成更复杂的垂直裂缝。模型和方法可为页岩水力压裂过程和机制研究及工程实践提供参考。 相似文献
11.
S. Y. Wang S. W. Sloan S. G. Fityus D. V. Griffiths C. A. Tang 《Rock Mechanics and Rock Engineering》2013,46(5):1165-1182
Rock is a heterogeneous geological material. When rock is subjected to internal hydraulic pressure and external mechanical loading, the fluid flow properties will be altered by closing, opening, or other interaction of pre-existing weaknesses or by induced new fractures. Meanwhile, the pore pressure can influence the fracture behavior on both a local and global scale. A finite element model that can consider the coupled effects of seepage, damage and stress field in heterogeneous rock is described. First, two series of numerical tests in relatively homogeneous and heterogeneous rocks were performed to investigate the influence of pore pressure magnitude and gradient on initiation and propagation of tensile fractures. Second, to examine the initiation of hydraulic fractures and their subsequent propagation, a series of numerical simulations of the behavior of two injection holes inside a saturated rock mass are carried out. The rock is subjected to different initial in situ stress ratios and to an internal injection (pore) pressure at the two injection holes. Numerically, simulated results indicate that tensile fracture is strongly influenced by both pore pressure magnitude and pore pressure gradient. In addition, the heterogeneity of rock, the initial in situ stress ratio (K), the distance between two injection holes, and the difference of the pore pressure in the two injection holes all play important roles in the initiation and propagation of hydraulic fractures. At relatively close spacing and when the two principal stresses are of similar magnitude, the proximity of adjacent injection holes can cause fracturing to occur in a direction perpendicular to the maximum principal stress. 相似文献
12.
Yao Yao 《Rock Mechanics and Rock Engineering》2012,45(3):375-387
Hydraulic fracturing technology is being widely used within the oil and gas industry for both waste injection and unconventional
gas production wells. It is essential to predict the behavior of hydraulic fractures accurately based on understanding the
fundamental mechanism(s). The prevailing approach for hydraulic fracture modeling continues to rely on computational methods
based on Linear Elastic Fracture Mechanics (LEFM). Generally, these methods give reasonable predictions for hard rock hydraulic
fracture processes, but still have inherent limitations, especially when fluid injection is performed in soft rock/sand or
other non-conventional formations. These methods typically give very conservative predictions on fracture geometry and inaccurate
estimation of required fracture pressure. One of the reasons the LEFM-based methods fail to give accurate predictions for
these materials is that the fracture process zone ahead of the crack tip and softening effect should not be neglected in ductile
rock fracture analysis. A 3D pore pressure cohesive zone model has been developed and applied to predict hydraulic fracturing
under fluid injection. The cohesive zone method is a numerical tool developed to model crack initiation and growth in quasi-brittle
materials considering the material softening effect. The pore pressure cohesive zone model has been applied to investigate
the hydraulic fracture with different rock properties. The hydraulic fracture predictions of a three-layer water injection
case have been compared using the pore pressure cohesive zone model with revised parameters, LEFM-based pseudo 3D model, a
Perkins-Kern–Nordgren (PKN) model, and an analytical solution. Based on the size of the fracture process zone and its effect
on crack extension in ductile rock, the fundamental mechanical difference of LEFM and cohesive fracture mechanics-based methods
is discussed. An effective fracture toughness method has been proposed to consider the fracture process zone effect on the
ductile rock fracture. 相似文献
13.
射孔作为井筒与储层之间的液流通道,是水力压裂过程中的重要可控性参数。为研究水平井射孔-近井筒破裂机制,采用岩层变形-流体渗流方程描述应力状态变化,应用连续损伤破裂单元表征三维破裂位置与形态演化,并开发有限元求解程序模拟分析了射孔对水平井初始破裂压力、破裂位置及近井筒裂缝复杂性的调控作用。通过与解析模型及射孔压裂物理模型试验结果对比,验证了模型及有限元程序的有效性;水平井破裂压力数值分析结果与现场测试数据吻合较好。研究表明：射孔可调控水平井破裂压力与初始破裂位置,同时对近井筒区域裂缝扩展形态影响显著。通过优化射孔参数可以引导初始破裂向最优破裂面扩展、有效降低破裂压力,减小由于螺旋射孔空间排布引起的水平井近井筒裂缝迂曲与复杂程度,提高致密油气藏压裂改造效果。 相似文献
14.
The hydraulic fracturing technique has been widely applied in many fields, such as the enhanced geothermal systems (EGS), the improvement of injection rates for geologic sequestration of CO2, and for the stimulations of oil and gas reservoirs. The key points for the success of hydraulic fracturing operations in unconventional resources are to accurately estimate the redistribution of pore pressure and stresses around the induced fracture and predict the reactivations of preexisting natural fractures. The pore pressure and stress regime around hydraulic fracture are affected by poroelastic and thermoelastic phenomena as well as by fracture opening compression. In this work, a comprehensive semi-analytical model is used to estimate the stress and pore pressure distribution around an injection-induced fracture from a single well in an infinite reservoir. The model allows the leak-off distribution in the formation to be three-dimensional with the pressure transient moving ellipsoidically outward into the reservoir from the fracture surface. The pore pressure and the stress changes in three dimensions at any point around the fracture caused by poroelasticity, thermoelasticity, and fracture compression are investigated. With Mohr-Coulomb failure criterion, we calculate the natural fracture reactivations in the reservoir. Then, two case studies of constant water injection into a hydraulic fracture are presented. This work is of interest in the interpretation of microseismicity in hydraulic fracturing and in the estimation of the fracture spacing for hydraulic fracturing operations. In addition, the results from this study can be very helpful for the selection of stimulated wells and further design of the refracturing operations. 相似文献
15.
A hydro-mechanical coupled model that can simultaneously consider the pore seepage of a rock matrix and the fracture seepage is proposed to simulate three-dimensional hydraulic fracturing. This model appropriately takes into account the fluid leak-off into the surrounding rock matrix from the fracture. Several examples are given to validate the seepage algorithms and the coupled model. The results suggest that this model can solve problems involving pore seepage and fracture seepage through simple pure fracture seepage. Moreover, it can reproduce the fluid pressure distribution and the crack initiation and propagation and consider the fluid loss during hydraulic fracturing. 相似文献
16.
储层岩体中的天然结构面对水力压裂缝网改造具有重要的影响。本文采用真实破裂过程分析软件RFPA2D-Flow,在考虑岩体非均质性和岩体渗流-应力-损伤破裂特性的基础上,对不同尺度天然结构面影响的水力压裂裂缝扩展与演化行为进行了模拟分析和讨论,研究结果表明:（1）当水力裂缝遇天然非闭合裂隙时,在水力裂缝靠近非闭合裂隙区间形成拉张应力区,水力裂缝与区间非闭合裂隙间微元体累进性张拉破坏是导致水力裂缝与非闭合裂隙贯通的主要机制;（2）层理等优势结构对水力压裂裂缝扩展及缝网形态影响十分显著,当最大主应力方向与层理面走向小角度相交时,层理结构面对水力裂隙的扩展起主要作用,当最大主应力方向与层理面走向大角度相交时,最大主压应力与层理面共同对缝网扩展起主导作用,随着优势结构面的增多和差应力的增大,水力压裂形成的缝网范围和复杂性程度随之增大;（3）储层水力压裂是一种局部范围内的短暂动力扰动过程,尽管断层的存在可以极大地影响水力裂缝的扩展模式,增大水力裂隙扩展高度,但相比于储层埋深,水力压裂对断层封闭性的破坏范围和断层活动性的扰动程度十分有限。 相似文献
17.
Yongquan Hu Zhiqiang Li Jinzhou Zhao Zhengwu Tao Pan Gao 《Environmental Earth Sciences》2017,76(15):546
The ultra-low-permeability shale gas reservoir has a lot of well-developed natural fractures. It has been proven that hydraulic fracture growth pattern is usually a complex network fracture rather than conventional single planar fractures by micro-seismic monitoring, which can be explained as the shear and tensile failure of natural fractures or creation of new cracks due to the increase in reservoir pore pressure caused by fluid injection during the process of hydraulic fracturing. In order to simulate the network fracture growth, a mathematical model was established based on full tensor permeability, continuum method and fluid mass conservation equation. Firstly, the governing equation of fluid diffusivity based on permeability tensor was solved to obtain the reservoir pressure distribution. Then Mohr–Coulomb shear failure criterion and tensile failure criterion were used to decide whether the rock failed or not in any block on the basis of the calculated reservoir pressure. The grid-block permeability was modified according to the change of fracture aperture once any type of rock failure criterion was met within a grid block. Finally, the stimulated reservoir volume (SRV) zone was represented by an enhancement permeability zone. After calibrating the numerical solution of the model with the field micro-seismic information, a sensitivity study was performed to analyze the effects of some factors including initial reservoir pressure, injection fluid volume, natural fracture azimuth angle and horizontal stress difference on the SRV (shape, size, bandwidth and length). The results show that the SRV size increases with the increasing initial pore reservoir and injection fluid volume, but decreases with the increase in the horizontal principal stress difference and natural fracture azimuth angle. The SRV shape is always similar for different initial pore reservoir and injection fluid volume. The SRV is observed to become shorter in length and wider in bandwidth with the decrease in natural fracture azimuth angle and horizontal principal stress difference. 相似文献
18.
脉冲水力压裂技术是改造低渗储层的一种重要手段,通过水楔效应和脉冲疲劳损伤双重作用沟通裂隙网络,提高低渗储层导流能力。在脉冲水力压裂室内试验中,试样中预制孔的密封问题是决定水力压裂试验成败的关键,而起裂压力又是评价脉冲封孔段密封效果的重要指标。通过煤岩脉冲水力压裂室内试验,建立了封孔段薄弱结合面与煤岩基体力学性质的关联,研究不同频率对煤岩起裂压力的影响,最终拟合相关数据得到:基于煤岩脉冲作用下起裂压力的预制孔封孔压力经验公式。研究结果为脉冲水力压裂室内试验的试样预制孔密封提供依据。 相似文献