共查询到20条相似文献，搜索用时 312 毫秒
1.
Shear modulus and damping ratio of grouted sand 总被引：2，自引：0，他引：2
Estelle Delfosse-Ribay Irini Djeran-Maigre Richard Cabrillac Daniel Gouvenot 《Soil Dynamics and Earthquake Engineering》2004,24(6):461-471
An experimental comparative study of three different grouted sands in terms of their effects on the values of two dynamic properties is presented. The dynamic properties studied are the shear modulus and the damping ratio which are determined with resonant column tests and cyclic triaxial tests. The behaviour of a pure Fontainebleau sand is compared with the behaviour of a Fontainebleau sand grouted with a silicate grout, a micro-fine cement grout and a mineral grout. The effects of the grouting treatment, the type of grout, the confining pressure, and the strains, on the shear modulus and the damping ratio are studied. The test results have shown that grouting improves the stiffness of the sand especially for small strains. Whatever the type of material, confining stress improves the shear modulus whereas it has a negligible effect on the damping ratio. When strain increases, the shear modulus decreases and the damping ratio increases. 相似文献
2.
Laboratory resonant column and cyclic triaxial tests are performed to determine the dynamic response (i.e. shear modulus and damping) of chemically grouted sand. The effect of chemical grouting is evaluated as a function of shearing-strain amplitude, confining stress, cycling prestrain, number of cycles, grout type, concentration, and curing time. The test results show that the shearing-strain amplitude, grout type and grout concentration have significant effects on the shear modulus and damping ratio of the test specimens. The increased addition of sodium silicate grout, which produces stiff gels, improved the shear modulus of the test sand. The acrylate (AC-400) and polyurethane (CG5610) grout, which produces flexible (rubber-like) gels, improved the damping capacity of the sand with increasing grout concentration. The addition of chemical grout greatly reduces the effect of cyclic prestraining over untreated sands. In the case of dense sands, the reduction of cyclic prestraining is less pronounced than in loose sands, which have a higher potential for particle movement and reorientation. 相似文献
3.
土的最大动剪切模量、剪应变幅和阻尼比是对土层进行动力反应分析的重要力学参数。利用英国GDS公司生产的RCA共振柱仪,研究围压对都江堰地区粉质粘土的上述动力学参数的影响。研究表明：相同围压条件下,最大动剪切模量、剪应变幅和阻尼比随重复次数基本不变,表明该试验过程具有可重复性;最大动剪切模量、剪应变幅和阻尼比均受围压影响较大,随着围压的增大,最大动剪切模量和阻尼比均逐渐增大,而剪应变幅随着围压的增大逐渐减小。据此,建立了都江堰地区粉质粘土动力学参数随围压变化的经验公式。本研究可为土层地震动力反应分析提供参考并积累基础资料。 相似文献
4.
针对荆江大堤江陵段下伏地层广泛分布的饱和粉细砂,参照原位试验成果重塑粉细砂试样,按估算的固结应力比(Kc约为1.6)对试样动剪模量、阻尼比及总应力动强度进行测试,结果表明:(1)试样应力-应变骨干曲线与Hardin-Drnevich双曲线模型假设高度吻合,Hardin公式可很好地拟合动模量/阻尼比与动应变的关系。在研究试样密实度范围内,最大动模量随围压和密实度的增加而增加,但围压对动模量的敏感性更高,且相同围压下动剪模量比与动应变关系曲线近乎重合。围压增大或密实度升高均会引起阻尼比的降低,1%应变对应的阻尼比分布在0.15~0.21之间;(2)偏压状态下以累积轴向应变5%作为液化判别标准进行抗液化强度试验,随特征振次及测试围压的增大,液化动剪应力比相应减小,试样振动孔压比最高仅能达到0.8~0.9;(3)由总应力法求取的动内摩擦角与黏聚力均随设定特征振次的增加而下降,且内聚力并非约等于0,表明动力作用下该试样具有一定的黏滞性。 相似文献
5.
黏土类土石混合体常作为路基填料在工程中广泛应用,然而其在交通荷载作用下的动力特性方面研究较少。为此,本文以0.05 Lc(Lc为圆柱试样直径)为土体、块石分类阈值,根据土石混合体中砾石掺量、侧限压力的不同,采用自振柱仪对其在小应变(10^-6~10^-4)下的动剪切模量和阻尼比进行研究。结果表明:土石混合体最大动剪切模量随砾石掺量的增加而不断增大,且在20%~40%掺量区间内增幅最大,随侧限压力的增加而增大,且增幅逐渐变小;在应变幅值相同的条件下,动剪切模量衰变程度随砾石掺量的增加而不断减少,且在20%~40%掺量区间内减幅最大,随侧限压力的增加而减小,且减幅逐渐变小;最小、最大阻尼比随砾石掺量和侧限压力的增加而减少。结合试验结果分别从颗粒“骨架”结构性、动态结构稳定性、材料密实度、能量耗散等方面阐述块石掺量和侧限压力对土石混合体动剪切模量和阻尼比的影响机理。最后采用优化Hardin-Drnevich模型建立砾石掺量、侧限压力与土石混合体动力特性参数(最大动剪切模量、参考剪应变、最大阻尼比、最小阻尼比)之间的估算公式,以期为土石混合路基的动力设计和施工提供指导。 相似文献
6.
利用GCTS共振柱测试仪研究了干密度和固结压力对固原黄土重塑土动剪切模量和阻尼比的影响及试验数据误差的基本规律。通过设计不同工况的试验条件,对比分析结果表明:相同含水率条件下,最大动剪切模量G_(dmax)随固结压力和干密度的增大而增大。相同干密度条件下,黄土的动剪切模量比随围压的增大而增大;阻尼比随围压的增大而减小;相同围压条件下,黄土动剪切模量比随干密度的增大而增大,阻尼比随干密度的增大而减小;不同剪应变特征点的动剪切模量比和阻尼比试验数据呈现一定的离散性,且离散程度阻尼比明显高于动剪切模量比。研究成果可为该地区场地地震反应分析及工程建设提供基础资料。 相似文献
7.
通过动三轴试验,研究了橡胶水泥土复合试样的动强度、动弹性模量和阻尼比等动力参数的变化规律,着重研究了橡胶粉掺量、围压和应变3个主要因素的影响并分析了内在机理。在围压不变的情况下,随着橡胶粉掺量的增大,橡胶水泥土复合试样动强度降低。围压越大,动强度越高,受橡胶粉掺量的影响越小。随着围压的增大,动弹性模量增大而阻尼比减小;随着橡胶粉掺量的增加,动弹性模量减小而阻尼比增大。通过数据拟合,得到了橡胶水泥土动弹性模量和阻尼比的计算公式。橡胶粉可以提高水泥土吸收能量的能力,采用橡胶水泥土作为地基处理材料时,能够起到减震的作用。 相似文献
8.
粉质黏土动剪切模量和阻尼比是建筑场地动力稳定性评价的重要动力参数。为分析豫东平原粉质黏土的动力特性,利用双向振动三轴仪试验系统,对取自豫东平原地区的粉质黏土进行动三轴试验,研究粉质黏土状态及固结压力对动剪切模量和阻尼比的影响。研究发现:可塑粉质黏土(PSC)与软塑粉质黏土(SSC)的动力特性存在相近的变化趋势,动剪切模量比随剪应变的增大而减小,阻尼比随剪应变的增大而增大;在同一应变水平下,SSC的动剪切模量比随固结压力的增大而增大、PSC的阻尼比随固结压力的增大而增大;在相同试验条件下,PSC的最大动剪切模量大于SSC的最大动剪切模量;在剪应变小于0.01%时两者动剪切模量快速衰减,剪应变达到0.03%时两者动剪切模量趋于一致。根据现有的粉质黏土动剪切模量与阻尼比研究成果,结合试验数据,提出粉质黏土动剪切模量比、阻尼比随剪应变变化的数学模型,为豫东平原粉质黏土场地工程建设中的动力稳定性评价提供依据。 相似文献
9.
A series of cyclic triaxial tests on clayey sands was carried out and attempts were made to evaluate the strain dependency of shear modulus and damping. Strain dependencies of shear modulus and damping were simply modeled. It was shown that the change in the effective confining stress with loading cycles in the undrained shear test needed to be considered particularly in the large strain range. The consideration could be made by normalizing G with G′0=AF(e)(σ′m/σmr)n, the initial shear modulus for the effective confining stress of that particular loading cycle, instead of using G0. G/G′0 was expressed by a function of γ as G/G′0=1/(1+bgγ) which was almost stress level independent for clayey sands used in this study. The damping ratio was not much affected by the confining stress. The strain dependency of the damping ratio was modeled by h=ahγ/(1+bhγ). Effects of load irregularity on the shear modulus were also investigated. The excess pore pressure and the residual strain were generated especially when the major peaks in the irregular loading were applied to the specimen. However, G/G′0 for the irregular loading could be represented reasonably well by the average curve for the uniform cyclic loading, if the excess pore water pressure and the residual strain were taken into account. 相似文献
10.
Frozen soil plays an important role on the stability of railway and highway subgrade in cold regions. However, the dynamic properties of frozen soil subjected to the freeze–thaw cycles have rarely been investigated. In this study, cryogenic cyclic triaxial tests were conducted on frozen compacted sand from Nehe, Heilongjiang Province in China which was subjected to the closed-system freeze–thaw cycles. A modified Hardin hyperbolic model was suggested to describe the backbone curves. Then, dynamic shear modulus and damping ratio versus cyclic shear strain were analyzed under the different freeze–thaw cycles, temperatures, initial water contents, loading frequencies and confining pressures. The results indicate that the freeze–thaw process plays a significant effect on the dynamic shear modulus and damping ratio, which slightly change after one freeze–thaw cycle. Dynamic shear modulus increases with increasing initial water content, temperature, loading frequency and confining pressure. Damping ratio increases with increasing initial water content, while decreases with increasing temperature and loading frequency. The effect of confining pressure on the damping ratio was found not significant. Furthermore, the empirical expressions were formulated to estimate dynamic shear modulus and damping ratio of the frozen compacted sand. The results provide guidelines for evaluating the infrastructures in cold regions. 相似文献
11.
Knowledge of the dynamic properties of the soil is of great importance as the dynamic shear modulus and damping ratio are necessary input data in finite element modeling programs. This paper presents a post-processing strategy to identify the shear modulus and damping ratio vs. shear strain curves using the experimental results of a dynamic centrifuge program. Application is presented for the Fontainebleau sand. The proposed methodology is fast, robust and able to capture the nonlinear hysteretic behavior of the material. Based on the results, specific parameters for the Fontainebleau sand are identified for the empirical equation of shear modulus and damping ratio proposed by Ishibashi and Zhang [1]. It is found that confining pressure has an important influence on both shear modulus evolution and damping ratio. 相似文献
12.
Three new estimators of the transfer function (H2, H3, and H4) in addition to the conventional estimator (H1) were utilized to determine damping and shear modulus of soils under random excitation conditions. The results of this study indicate that as confining pressure increases, the difference between damping values obtained by the various estimators decreases, whereas the shear moduli are not influenced by the variation in confining pressure. 相似文献
13.
西昌昔格达组黏土岩动力特性试验研究 总被引：1，自引：0，他引：1
在大量动三轴试验的基础上,研究了不同固结条件(σ3c=100,200,400 kPa,kc=1.0,1.5,2.0)下西昌昔格达组黏土岩的动应力-动应变关系、动弹性模量、阻尼比及动强度特性。研究结果表明:西昌昔格达组黏土岩在一定条件下的动应力-动应变关系符合幂函数模型。动应力随着固结围压σ3c或固结主压力比kc增大而增大。在相同围压下,达到相同动应变时,偏压固结状态比均压状态所需要的动应力大。当其他条件相同时,动弹性模量随固结压力或固结主压力比增大而增大,随着动应变的增加而减小并趋于稳定。最大动弹性模量Ed0与σ3c/Pa、kc均有良好的幂函数关系,且对不同固结应力状态条件可以归一。阻尼比随动应变增大而增大,但增大幅度随动应变增大而迅速减小,阻尼比随围压或固结主压力比增大而减小,但它们对阻尼比影响较小。不同固结应力状态下(λ/λmax)与(1-Ed/Ed0)有良好的幂函数关系。西昌昔格达组饱和黏土岩动剪应力τd随固结围压σ3c或固结主压力比kc增大而增大,随振动次数增加而减小。τd/σm均随固结围压σ3c增大而减小,随固结压力比kc增大而增大。动剪应力τd与平均压力σm、固结主压力比kc有较好的线性关系。 相似文献
14.
针对广西上林县原状红黏土开展一系列循环加载动三轴试验,分析天然含水率、围压与固结应力比等对红黏土动力特性,包话动应力-动应变关系、动弹性模量以及阻尼比等的影响来研究循环荷载作用下红黏土的动力特性。试验结果表明:广西原状红黏土动应力-动应变关系曲线接近双曲线;由于初始剪应力的影响,达到相同的动应变,在均压固结下所需的动应力比在偏压固结下所需动应力要小;动弹性模量随着动应变的增加而减小,且减小幅度随应变增加逐渐减小,初始应力状态对动弹性模量的影响最为显著;固结应力比、围压、含水率和振动次数等对阻尼比均有影响,综合反映在阻尼比随动应变增加而减小,阻尼比离散性较大,取值范围在0.05~0.20之间。利用Konder双曲线模型对试验数据进行拟合,得到相关参数,可为广西地区原状红黏土动力特性设计和数值计算提供一定的理论和参数支持。 相似文献
15.
The availability of efficient numerical techniques and high speed computation facilities for carrying out the nonlinear dynamic analysis of soil-structure interaction problems and the analysis of ground response due to earthquake loading increase the demand for proper estimation of dynamic properties of soil at small strain as well as at large strain levels. Accurate evaluation of strain dependent dynamic properties of soil such as shear modulus and damping characteristics along with the liquefaction potential are the most important criteria for the assessments of geotechnical problems involving dynamic loading. In this paper the results of resonant column tests and undrained cyclic triaxial tests are presented for Kasai River sand. A new correlation for dynamic shear damping (Ds) and maximum dynamic shear modulus (Gmax) are proposed for the sand at small strain. The proposed relationships and the observed experimental data match quite well. The proposed relationships are also compared with the published relationships for other sands. The liquefaction potential of the sand is estimated at different relative densities and the damping characteristics at large strain level is also reported. An attempt has been made to correlate the Gmax with the cyclic strength of the soil and also with the deviator stress (at 1% strain) from static triaxial tests. 相似文献
16.
17.
Improved estimators of the transfer function (H2, H3, H4), in addition to the conventional estimator (H1), were used to evaluate the dynamic soil properties and to study the effect of confinement duration on damping and shear modulus of soils. In this study, two types of cohesive soils, a kaolinite and a bentonite, were tested using a resonant column apparatus under random torsional excitation conditions. Root meam square strain levels in the range of 10−3–10−2 and confining pressures in the range of 34.47–150 kPa were considered. The confinement duration ranged from 500 to 20 000 min. The results of this study indicate that as time increases, the difference in damping values obtained by the various estimators of the transfer function decreases, whereas the shear moduli are not influenced by the variation in confinement duration. 相似文献
18.
Kosta V. Talaganov 《Soil Dynamics and Earthquake Engineering》1996,15(7):411-418
Presented in this paper are the results of the laboratory tests of sands performed for the purpose of defining the characteristics of the dynamic shear stress-shear strain relationships. For this purpose, the transformation of the initial stress-strain characteristics of undrained saturated sands was investigated separately. These transformations take place under conditions of an increase in pore pressure under the effect of sufficiently intensive dynamic excitations. The process of occurrence and development of liquefaction was investigated simultaneously. The obtained results show that the transformation of the stress-strain relationships leads to intensive reduction in the initial dynamic characteristics of sands. At the moment of occurrence of initial liquefaction, for the selected strain, shear moduli are considerably reduced in respect to their initial values. These parameters tend to be further reduced in the phase of post-initial liquefaction. It is concluded that the process of liquefaction of sands can be completely defined through the transformation of the stress-strain relationships. 相似文献
19.
20.
Cyclic behavior of natural fine grained soils under a broad range of strains were investigated considering the effects of plasticity index and changes in confining pressures based on cyclic triaxial tests. A total of 98 stress controlled cyclic triaxial tests were conducted on normally consolidated and slightly overconsolidated samples. The investigation was divided into two parts. The first part consists of stress controlled cyclic triaxial tests under different stress amplitudes that were conducted to estimate the modulus reduction and the thresholds between nonlinear elastic, elasto-plastic and viscoplastic behavior. The second part involves the investigation of the undrained stress–strain behavior of fine grained soils under irregular cyclic loadings. The results showed that the elastic threshold is approximately equal to 90% of Gmax. Another transition point was defined as the flow threshold where the value of tangent of shear modulus ratio changes for the second time. Simple empirical relationships to estimate the dynamic shear modulus and damping ratio was formulated and compared with the similar empirical relationships proposed in the literature. The results provide useful guidelines for preliminary estimation of dynamic shear modulus and damping ratio values for fine grained soils based on laboratory tests. 相似文献