首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Microbial dissimilatory iron reduction (DIR) has been identified as a mechanism for production of aqueous Fe(II) that has low 56Fe/54Fe ratios in modern and ancient suboxic environments that contain ferric oxides or hydroxides. These studies suggest that DIR could have played an important role in producing distinct Fe isotope compositions in Precambrian banded iron formations or other marine sedimentary rocks. However, the applicability of experimental studies of Fe isotope fractionation produced by DIR in geochemically simple systems to ancient marine environments remains unclear. Here we report Fe isotope fractionations produced during dissimilatory microbial reduction of hematite by Geobacter sulfurreducens in the presence and absence of dissolved Si at neutral and alkaline pH. Hematite reduction was significantly decreased by Si at alkaline (but not neutral) pH, presumably due to Si polymerization at the hematite surface. The presence of Si altered Fe isotope fractionation factors between aqueous Fe(II) or sorbed Fe(II) and reactive Fe(III), reflecting changes in bonding environment of the reactive Fe(III) component at the oxide surface. Despite these changes in isotopic fractionations, our results demonstrate that microbial Fe(III) oxide reduction produces Fe(II) with negative δ56Fe values under conditions of variable pH and dissolved Si, similar to the large inventory of negative δ56Fe in Neoarchean and Paleoproterozoic age marine sedimentary rocks.  相似文献   

2.
Published experimental data for Al(III) and Fe(III) binding by fulvic and humic acids can be explained approximately by the Humic Ion-Binding Model VI. The model is based on conventional equilibrium reactions involving protons, metal aquo ions and their first hydrolysis products, and binding sites ranging from abundant ones of low affinity, to rare ones of high affinity, common to all metals. The model can also account for laboratory competition data involving Al(III), Fe(III) and trace elements, supporting the assumption of common binding sites. Field speciation data (116 examples) for Al in acid-to-neutral waters can be accounted for, assuming that 60-70 % (depending upon competition by iron, and the chosen fulvic acid : humic acid ratio) of the dissolved organic carbon (DOC) is due to humic substances, the rest being considered inert with respect to ion binding. After adjustment of the model parameter characterizing binding affinity within acceptable limits, and with the assumption of equilibrium with a relatively soluble form of Fe(OH)3, the model can simulate the results of studies of two freshwater samples, in which concentrations of organically complexed Fe were estimated by kinetic analysis.The model was used to examine the pH dependence of Al and Fe binding by dissolved organic matter (DOM) in freshwaters, by simulating the titration with Ca(OH)2 of an initially acid solution, in equilibrium with solid-phase Al(OH)3 and Fe(OH)3. For the conditions considered, Al, which is present at higher free concentrations than Fe(III), competes significantly for the binding of Fe(III), whereas Fe(III) has little effect on Al binding. The principal form of Al simulated to be bound at low pH is Al3+, AlOH2+ being dominant at pH >6; the principal bound form of Fe(III) is FeOH2+ at all pH values in the range 4-9. Simulations suggest that, in freshwaters, both Al and Fe(III) compete significantly with trace metals (Cu, Zn) for binding by natural organic matter over a wide pH range (4-9). The competition effects are especially strong for a high-affinity trace metal such as Cu, present at low total concentrations (∼1 nM). As a result of these competition effects, high-affinity sites in humic matter may be less important for trace metal binding in the field than they are in laboratory systems involving humic matter that has been treated to remove associated metals.  相似文献   

3.
Different methods were compared to evaluate the oxidation capacity of ferric iron in column studies. The specific adsorption of the reactive tracer phosphate on the Fe(III) oxide surface was used as an alternative approach to determine the oxidation capacity utilizing the linear correlation between the long-term extent of Fe(III) reduction and the specific surface area of the oxide. Although a low crystalline form of ferric iron (two-line ferrihydrite) was used as electron acceptor and toluene as a carbon source, only 31 and 24% respectively of the total iron was reduced by Geobacter metallireducens in parallel experiments. The results of the phosphate tracer tests were in good agreement with the Fe(III) that was actually reduced and the microbially oxidized toluene. The oxidation capacity of ferric iron is therefore overestimated by the chemical extraction methods, which completely dissolve the ferrihydrite and neglect surface-dependent limitations.  相似文献   

4.
The degree of metal contamination (Zn, Pb, Cu, Ni, Cd) has been investigated in the vicinity of an old unmonitored municipal landfill in Prague, Czech Republic, where the leachate is directly drained into a surface stream. The water chemistry was coupled with investigation of the stream sediment (aqua regia extract, sequential extraction, voltammetry of microparticles) and newly formed products (SEM/EDS, XRD). The MINTEQA2 speciation-solubility calculation showed that the metals (Zn, Pb, Cu, Ni) are mainly present as carbonate complexes in leachate-polluted surface waters. These waters were oversaturated with respect to Fe(III) oxyhydroxides, calcite (CaCO3) and other carbonate phases. Three metal attenuation mechanisms were identified in leachate-polluted surface waters: (i) spontaneous precipitation of metal-bearing calcite exhibiting significant concentrations of trace elements (Fe, Mn, Mg, Sr, Ba, Pb, Zn, Ni); (ii) binding to Fe(III) oxyhydroxides (mainly goethite, FeOOH) (Pb, Zn, Cu, Ni); and (iii) preferential bonding to sediment organic matter (Cu). These processes act as the key scavenging mechanisms and significantly decrease the metal concentrations in leachate-polluted water within 200 m from the direct leachate outflow into the stream. Under the near-neutral conditions governing the sediment/water interface in the landfill environment, metals are strongly bound in the stream sediment and remain relatively immobile.  相似文献   

5.
Uranium mill tailings were anaerobically incubated in the presence of H2 with Alteromonas putrefaciens, a bacterium known to couple the oxidation of H2 and organic compounds to the reduction of Fe(III) oxides. There was a direct correlation between the extent of Fe(III) reduction and the accumulation of dissolved226Ra. In sterile tailings in which Fe(III) was not reduced, there was negligible leaching of226Ra. The behavior of Ba was similar to that of Ra in inoculated and sterile systems. These results demonstrate that under anaerobic conditions, microbial reduction of Fe(III) may result in the release of dissolved226Ra from uranium mill tailings.  相似文献   

6.
Assessing the influence of CO2 on soil and aquifer geochemistry is a task of increasing interest when considering risk assessment for geologic carbon sequestration. Leakage and CO2 ascent can lead to soil acidification and mobilization of potentially toxic metals and metalloids due to desorption or dissolution reactions. We studied the CO2 influence on an Fe(III) (oxyhydr)oxide rich, gleyic Fluvisol sampled in close vicinity to a Czech mofette site and compared the short-term CO2 influence in laboratory experiments with observations on long-term influence at the natural site. Six week batch experiments with/without CO2 gas flow at 3 different temperatures and monitoring of liquid phase metal(loid) concentrations revealed two main short-term mobilization processes. Within 1 h to 1 d after CO2 addition, mobilization of weakly adsorbed metal cations occurred due to surface protonation, most pronounced for Mn (2.5–3.3 fold concentration increase, mobilization rates up to 278 ± 18 μg Mn kgsoil−1 d−1) and strongest at low temperatures. However, total metal(loid) mobilization by abiotic desorption was low. After 1–3 d significant Fe mobilization due to microbially-triggered Fe(III) (oxyhydr)oxide dissolution began and continued throughout the experiment (up to 111 ± 24 fold increase or up to 1.9 ± 0.6 mg Fe kgsoil−1 d−1). Rates increased at higher temperature and with a higher content of organic matter. The Fe(III) mineral dissolution was coupled to co-release of incorporated metal(loid)s, shown for As (up to 16 ± 7 fold, 11 ± 8 μg As kgsoil−1 d−1). At high organic matter content, re-immobilization due to resorption reactions could be observed for Cu. The already low pH (4.5–5.0) did not change significantly during Fe(III) reduction due to buffering from sorption and dissolution reactions, but a drop in redox potential (from > +500 mV to minimum +340 ± 20 mV) occurred due to oxygen depletion. We conclude that microbial processes following CO2 induction into a soil can contribute significantly to metal(loid) mobilization, especially at optimal microbial growth conditions (moderate temperature, high organic carbon content) and should be considered for carbon sequestration monitoring and risk assessment.  相似文献   

7.
《Applied Geochemistry》2004,19(9):1471-1482
Ground-water chemistry data from coastal plain environments have been examined to determine the geochemical conditions and processes that occur in these areas and assess their implications for aquifer susceptibility. Two distinct geochemical environments were studied to represent a range of conditions: an inner coastal plain setting having more well-drained soils and lower organic carbon (C) content and an outer coastal plain environment that has more poorly drained soils and high organic C content. Higher concentrations of most major ions and dissolved inorganic and organic C in the outer coastal plain setting indicate a greater degree of mineral dissolution and organic matter oxidation. Accordingly, outer coastal plain waters are more reducing than inner coastal plain waters. Low dissolved oxygen (O2) and nitrate (NO3−) concentrations and high iron (Fe) concentrations indicate that ferric iron (Fe (III)) is an important electron acceptor in this setting, while dissolved O2 is the most common terminal electron acceptor in the inner coastal plain setting.The presence of a wide range of redox conditions in the shallow aquifer system examined here underscores the importance of providing a detailed geochemical characterization of ground water when assessing the intrinsic susceptibility of coastal plain settings. The greater prevalence of aerobic conditions in the inner coastal plain setting makes this region more susceptible to contamination by constituents that are more stable under these conditions and is consistent with the significantly (p<0.05) higher concentrations of NO3− found in this setting. Herbicides and their transformation products were frequently detected (36% of wells sampled), however concentrations were typically low (<0.1 μg/L). Shallow water table depths often found in coastal plain settings may result in an increased risk of the detection of pesticides (e.g., alachlor) that degrade rapidly in the unsaturated zone.  相似文献   

8.
Rates of reduction of Fe(III) oxyhydroxides by the bacterium Shewanella putrefaciens were measured as a function of the bacterial density and the Fe(III) substrate concentration. The results show that an earlier reported positive correlation between the solubility products (*Kso) and the maximum cell-specific reduction rates (vmax) of predominantly poorly crystalline Fe(III) oxyhydroxides also applies to insoluble and crystalline Fe(III) oxyhydroxides. The mineral solubilities were measured by a dialysis bag technique under acidic conditions (pH 1 up to 2.5) at 25 °C. Initial iron reduction rates by S. putrefaciens were determined in the presence of excess lactate as electron donor. In all cases, the microbial reduction rate exhibited saturation behavior with respect to the Fe(III) oxyhydroxide concentration. On a double logarithmic scale, the maximum rates vmax and the solubility products defined a single linear free energy relationship (LFER) for all the Fe(III) oxyhydroxides considered. The solubility provided a better predictor of vmax than the specific surface area of the mineral phase. A rate limitation by the electron transfer between an iron reductase and a Fe(III) center, or by the subsequent desorption of Fe2+ from the iron oxide mineral surface, are both consistent with the observed LFER.  相似文献   

9.
 Four smectites with different total Fe contents (two nontronites, one ferruginous smectite, and one montmorillonite) were reduced to obtain a range of Fe(II)/Fe(III) ratios and their magnetic properties measured with a SQUID (superconducting quantum interference device) as a function of applied magnetic field strength at 5 K and as a function of temperature in a field of 0.1 T. The unaltered nontronite and ferruginous smectite specimens showed antiferromagnetic coupling, whereas the coupling in the reduced samples was ferromagnetic; the paramagnetic Curie temperature increased with increasing Fe(II) content. Data collected after cooling samples in both the presence and absence of an external magnetic field of 0.1 T showed that at low temperatures the reduced (ferromagnetic) nontronite and ferruginous smectite samples exhibit a memory effect of previous magnetic field exposure consistent with superparamagnetic or spin glass behavior. The superparamagnetic/ferromagnetic transition temperature, T f , increased linearly with increasing Fe(II) content for each of the nontronites, but the relationship between T f and Fe(II) content differed for different clays, thus demonstrating that T f is sensitive to isomorphous substitutions in the clay structure. The montmorillonite was paramagnetic in both oxidized and reduced forms. Received: 23 March 1999 / Revised, accepted: 27 August 1999  相似文献   

10.
The biologically-mediated reduction of synthetic samples of the Fe(III)-bearing minerals hematite, goethite, lepidocrocite, feroxhyte, ford ferrihydrite, akaganeite and schwertmannite by Geobacter sulfurreducens has been investigated using microbiological techniques in conjunction with X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). This combination of approaches offers unique insights into the influence of subtle variations in the crystallinity of a given mineral on biogeochemical processes, and has highlighted the importance of (oxyhydr)oxide crystallite morphology in determining the changes occurring in a given mineral phase. Problems arising from normalising the biological Fe(III) reduction rates relative to the specific surface areas of the starting materials are also highlighted. These problems are caused primarily by particle aggregation, and compounded when using spectrophotometric assays to monitor reduction. For example, the initial rates of Fe(III) reduction observed for two synthetic feroxyhytes with different crystallinities (as shown by XRD and TEM studies) but almost identical surface areas, differ substantially. Both microbiological and high-resolution TEM studies show that hematite and goethite are susceptible to limited amounts of Fe(III) reduction, as evidenced by the accumulation of Fe(II) during incubation with G. sulfurreducens and the growth of nodular structures on crystalline goethite laths during incubation. Lepidocrocite and akaganeite readily transform into mixtures of magnetite and goethite, and XRD data indicate that the proportion of magnetite increases within the transformation products as the crystallinity of the starting material decreases. The presence of anthraquinone-2,6-disulfonate (AQDS) as an electron shuttle increases both the initial rate and longer term extent of biological Fe(III) reduction for all of the synthetic minerals examined. High-resolution XPS indicates subtle but measurable differences in the Fe(III):Fe(II) ratios at the mineral surfaces following extended incubation. For example, for a poorly crystalline schwertmannite, deconvolution of the Fe2p3/2 peak suggests that the Fe(III):Fe(II) ratio of the near-surface regions varies from 1.0 in the starting material to 0.9 following 144 h of incubation with G.sulfurreducens, and to 0.75 following the same incubation period in the presence of 10 μM AQDS. These results have important implications for the biogeochemical cycling of iron.  相似文献   

11.
The objectives of this study were to partition out the predominant anaerobic respiration pathways coupled to C oxidation and to further elucidate the controls of anaerobic C respiration in three major saltmarsh habitats at Skidaway Island, GA; the short form of Spartina alterniflora (SS), the tall form of S. alterniflora (TS), and unvegetated, bioturbated creekbank (CB). Geochemical analysis of pore water and solid phase constituents revealed that the SS site experienced highly reducing conditions with two orders of magnitude higher pore water sulfide inventories (1.884 mmol m−2) than TS (0.003 mmol m−2) and CB (0.005 mmol m−2), respectively. Conversely, reactive Fe(III) inventories at TS (2208 mmol m−2) and CB (2881 mmol m−2) were up to 7–9 times higher than at SS (338 mmol m−2). Incubations and intact core experiments indicated that reduction accounted for 95% (SS), 37% (TS) and 66% (CB) of total anaerobic respiration. There was no detectable Fe(III) reduction at SS, while Fe(III) reduction accounted for up to 70% of C oxidation in the 3–6 cm depth interval at TS and 0–3 cm depth of CB, and on average, approximately 55% of C oxidation over two-thirds of marsh surface area. Laboratory manipulations provided further evidence for the importance of Fe(III) reduction as the accumulation rates of fermentation products were high when Fe(III) reduction was inhibited by removing the Fe(III) minerals from highly bioturbated CB sediments with higher Fe(III) mineral contents. Anaerobic C oxidation, - and Fe(III)-reduction rates appeared to be highest at the TS site during active plant growth in summer. Overall results suggest that bioturbation by macrofauna is the overriding factor in modulating the pathway of C mineralization in the saltmarsh, whereas availability of organic substrates from plants is a key factor in controlling the C oxidation rate.  相似文献   

12.
Previous studies have shown that saltmarsh macrophytes have a significant influence on sediment biogeochemistry, both through radial release of oxygen from roots and also via primary production and release of labile organic exudates from roots. To assess the seasonal influence of the needle rush, Juncus roemarianus, on saltmarsh sediment geochemistry, pore waters and sediments were collected from the upper 50 cm of two adjacent sites, one unvegetated and the other vegetated by Juncus roemarianus, in a Georgia saltmarsh during winter and summer. Pore waters collected at 1- to 2-cm intervals were analyzed for pH, alkalinity, dissolved phosphate, ammonium, Fe(II), Fe(III), Mn(II), sulfide, sulfate, and organic carbon. Sediments were collected at 5-cm intervals and analyzed for iron distribution in the solid phase using a two-step sequential extraction. The upper 50 cm of the sediment pore waters are mostly sulfidic during both winter and summer. The pore water and sediment geochemistry suggest organic matter degradation is coupled mostly to Fe(III) and sulfate reduction. In summer, there is greater accumulation of alkalinity, sulfide, ammonium, and phosphate in the pore waters and lower levels of ascorbate extractable Fe, which is presumed to be comprised primarily of readily reducible Fe(III) oxides, in the sediments, consistent with higher organic matter degradation rates in summer compared to winter. Lower pH, alkalinity, ammonium, and sulfide concentrations in sediments with Juncus, compared to nearby unvegetated sediments, is consistent with release of oxygen into the Juncus rhizosphere, especially during summer.  相似文献   

13.
Fe(II)-Fe(III) redox behavior has been studied in the presence of catechol under different pH, ionic media, and organic compound concentrations. Catechol undergoes oxidation in oxic conditions producing semiquinone and quinone and reduces Fe(III) in natural solutions including seawater (SW). It is a pH-dependent process. Under darkness, the amount of Fe(II) generated is smaller and is related to less oxidation of catechol. The Fe(II) regeneration is higher at lower pH values both in SW with log k = 1.86 (M−1 s−1) at pH 7.3 and 0.26 (M−1 s−1) at pH 8.0, and in NaCl solutions with log k of 1.54 (M−1 s−1) at pH 7.3 and 0.57 (M−1 s−1) at pH 8.0. At higher pH values, rate constants are higher in NaCl solutions than in SW. This is due to the complexation of Mg(II) present in the media with the semiquinone that inhibits the formation of a second Fe(II) through the reaction of this intermediate with other center Fe(Cat)+.  相似文献   

14.
《Applied Geochemistry》2006,21(8):1301-1321
Low-quality pore waters containing high concentrations of dissolved H+, SO4, and metals have been generated in the East Tailings Management Area at Lynn Lake, Manitoba, as a result of sulfide-mineral oxidation. To assess the abundance, distribution, and solid-phase associations of S, Fe, and trace metals, the tailings pore water was analyzed, and investigations of the geochemical and mineralogical characteristics of the tailings solids were completed. The results were used to delineate the mechanisms that control acid neutralization, metal release, and metal attenuation. Migration of the low-pH conditions through the vadose zone is limited by acid-neutralization reactions, resulting in the development of distinct pore-water pH zones at depth; the neutralization reactions involve carbonate (pH ⩾ 5.7), Al-hydroxide (pH ⩾ 4.0), and aluminosilicate solids. As the zone of low-pH pore water expands, the pH will then be primarily controlled by less soluble solids, such as Fe(III) oxyhydroxides (pH < 3.5) and the relatively more recalcitrant aluminosilicates (pH ⩾ 1.3). Precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxides and hydroxysulfates control the concentrations of dissolved Fe(III). Concentrations of dissolved SO4 are principally controlled by the formation of gypsum and jarosite. Geochemical extractions indicate that the solid-phase concentrations of Ni, Co, and Zn are associated predominantly with reducible and acid-soluble fractions. The concentrations of dissolved trace metals are therefore primarily controlled by adsorption/complexation and (or) co-precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxide and hydroxysulfate minerals. Concentrations of dissolved metals with relatively low mobility, such as Cu, are also controlled by the precipitation of discrete minerals. Because the major proportion of metals is sequestered through adsorption and (or) co-precipitation, the metals are susceptible to remobilization if low-pH or reducing conditions develop within the tailings.  相似文献   

15.
This study presents molecular orbital/density functional theory (MO/DFT) calculations of the electronic structure, vibrational frequencies, and equilibrium isotope fractionation factors for iron desferrioxamine B (Fe-DFO-B) complexes in aqueous solution. In general, there was good agreement between the predicted properties of Fe(III)-DFO-B and previously published experimental and theoretical results. The predicted fractionation factor for equilibrium between Fe(III)-DFO-B and Fe(III)-catecholate at 22 °C, 0.68 ± 0.25‰, was in good agreement with a previously measured isotopic difference between bacterial cells and solution during the bacterial-mediated dissolution of hornblende [Brantley S. L., Liermann L. and Bullen T. D. (2001) Fractionation of Fe isotopes by soil microbes and organic acids. Geology29, 535-538]. Conceptually, this agreement is consistent with the notion that Fe is first removed from mineral surfaces via complexation with small organic acids (e.g., oxalate), subsequently sequestered by DFO-B in solution, and ultimately delivered to bacterial cells by Fe(III)-DFO-B complexes. The ability of DFO-B to discriminate between Fe(III) and Fe(II)/Al(III) was investigated with Natural Bond Orbital (NBO) analysis and geometry calculations of each metal-DFO-B complex. The results indicated that higher affinity for Fe(III) is not strictly a function of bond length but also the degree of Fe-O covalent bonding.  相似文献   

16.
Heavy metal profiles below a 15-year old sanitary landfill overlying a 30 m thick natural clay deposit are presented. Results indicate that unlike soluble species such as Cl− and Na+ which have migrated distances up to 130 cm, Cu, Zn and Pb have migrated only up to 10 cm. The extent of Fe migration is estimated to be 20 cm. Highly reducing conditions at the interface (Eh= −130mV), coupled with the alkaline nature of the clay pore waters, have resulted in the precipitation of migrated heavy metals as carbonates. At the clay/waste interface, 88, 84 and 80% of the excess Fe, Zn and Pb, respectively, are present as secondary carbonates. This is confirmed by selective chemical dissolution analyses which also show that Fe, Zn, Pb and, to a greater extent, Cu are present in solid organic forms at the interface. Batch equilibrium studies clearly show that Cu and Pb removal from leachate is significantly increased by the presence of carbonates in the soil. For example, 75% more Pb is removed by the carbonate-rich bulk soil than the carbonate-free soil. The batch studies also show that when thepH> 5.2, removal of metal increases significantly due to precipitation as carbonates. From the results it is concluded that the presence of metal sludges in landfills lined naturally or artifically by a carbonate-rich clayey barrier reduces the rate of migration of numerous toxic transition metals and may also decrease the barrier porosity by precipitation. The decreases in porosity will be beneficial to the performance of the barrier due to reductions in both advection and diffusion.  相似文献   

17.
The speciation of iron (Fe) in soils, sediments and surface waters is highly dependent on chemical interactions with natural organic matter (NOM). However, the molecular structure and hydrolysis of the Fe species formed in association with NOM is still poorly described. In this study extended X-ray absorption fine structure (EXAFS) spectroscopy was used to determine the coordination chemistry and hydrolysis of Fe(III) in solution of a peat humic acid (5010-49,200 μg Fe g−1 dry weight, pH 3.0-7.2). Data were analyzed by both conventional EXAFS data fitting and by wavelet transforms in order to facilitate the identification of the nature of backscattering atoms. Our results show that Fe occurs predominantly in the oxidized form as ferric ions and that the speciation varies with pH and Fe concentration. At low Fe concentrations (5010-9920 μg g−1; pH 3.0-7.2) mononuclear Fe(III)-NOM complexes completely dominates the speciation. The determined bond distances for the Fe(III)-NOM complexes are similar to distances obtained for Fe(III) complexed by desferrioxamine B and oxalate indicating the formation of a five-membered chelate ring structure. At higher Fe concentrations (49,200 μg g−1; pH 4.2-6.9) we detect a mixture of mononuclear Fe(III)-NOM complexes and polymeric Fe(III) (hydr)oxides with an increasing amount of Fe(III) (hydr)oxides at higher pH. However, even at pH 6.9 and a Fe concentration of 49,200 μg g−1 our data indicates that a substantial amount of the total Fe (>50%) is in the form of organic complexes. Thus, in environments with significant amounts of organic matter organic Fe complexes will be of great importance for the geochemistry of Fe. Furthermore, the formation of five-membered chelate ring structures is in line with the strong complexation and limited hydrolytic polymerization of Fe(III) in our samples and also agrees with EXAFS derived structures of Fe(III) in organic soils.  相似文献   

18.
The Bemidji aquifer in Minnesota, USA is a well-studied site of subsurface petroleum contamination. The site contains an anoxic groundwater plume where soluble petroleum constituents serve as an energy source for a region of methanogenesis near the source and bacterial Fe(III) reduction further down gradient. Methanogenesis apparently begins when bioavailable Fe(III) is exhausted within the sediment. Past studies indicate that Geobacter species and Geothrix fermentens-like organisms are the primary dissimilatory Fe-reducing bacteria at this site. The Fe mineralogy of the pristine aquifer sediments and samples from the methanogenic (source) and Fe(III) reducing zones were characterized in this study to identify microbiologic changes to Fe valence and mineral distribution, and to identify whether new biogenic mineral phases had formed. Methods applied included X-ray diffraction; X-ray fluorescence (XRF); and chemical extraction; optical, transmission, and scanning electron microscopy; and Mössbauer spectroscopy.All of the sediments were low in total Fe content (≈ 1%) and exhibited complex Fe-mineralogy. The bulk pristine sediment and its sand, silt, and clay-sized fractions were studied in detail. The pristine sediments contained Fe(II) and Fe(III) mineral phases. Ferrous iron represented approximately 50% of FeTOT. The relative Fe(II) concentration increased in the sand fraction, and its primary mineralogic residence was clinochlore with minor concentrations found as a ferroan calcite grain cement in carbonate lithic fragments. Fe(III) existed in silicates (epidote, clinochlore, muscovite) and Fe(III) oxides of detrital and authigenic origin. The detrital Fe(III) oxides included hematite and goethite in the form of mm-sized nodular concretions and smaller-sized dispersed crystallites, and euhedral magnetite grains. Authigenic Fe(III) oxides increased in concentration with decreasing particle size through the silt and clay fraction. Chemical extraction and Mössbauer analysis indicated that this was a ferrihydrite like-phase. Quantitative mineralogic and Fe(II/III) ratio comparisons between the pristine and contaminated sediments were not possible because of textural differences. However, comparisons between the texturally-similar source (where bioavailable Fe(III) had been exhausted) and Fe(III) reducing zone sediments (where bioavailable Fe(III) remained) indicated that dispersed detrital, crystalline Fe(III) oxides and a portion of the authigenic, poorly crystalline Fe(III) oxide fraction had been depleted from the source zone sediment by microbiologic activity. Little or no effect of microbiologic activity was observed on silicate Fe(III). The presence of residual “ferrihydrite” in the most bioreduced, anoxic plume sediment (source) implied that a portion of the authigenic Fe(III) oxides were biologically inaccessible in weathered, lithic fragment interiors. Little evidence was found for the modern biogenesis of authigenic ferrous-containing mineral phases, perhaps with the exception of thin siderite or ferroan calcite surface precipitates on carbonate lithic fragments within source zone sediments.  相似文献   

19.
The Fe(II) adsorption by non-ferric and ferric (hydr)oxides has been analyzed with surface complexation modeling. The CD model has been used to derive the interfacial distribution of charge. The fitted CD coefficients have been linked to the mechanism of adsorption. The Fe(II) adsorption is discussed for TiO2, γ-AlOOH (boehmite), γ-FeOOH (lepidocrocite), α-FeOOH (goethite) and HFO (ferrihydrite) in relation to the surface structure and surface sites. One type of surface complex is formed at TiO2 and γ-AlOOH, i.e. a surface-coordinated Fe2+ ion. At the TiO2 (Degussa) surface, the Fe2+ ion is probably bound as a quattro-dentate surface complex. The CD value of Fe2+ adsorbed to γ-AlOOH points to the formation of a tridentate complex, which might be a double edge surface complex. The adsorption of Fe(II) to ferric (hydr)oxides differs. The charge distribution points to the transfer of electron charge from the adsorbed Fe(II) to the solid and the subsequent hydrolysis of the ligands that coordinate to the adsorbed ion, formerly present as Fe(II). Analysis shows that the hydrolysis corresponds to the hydrolysis of adsorbed Al(III) for γ-FeOOH and α-FeOOH. In both cases, an adsorbed M(III) is found in agreement with structural considerations. For lepidocrocite, the experimental data point to a process with a complete surface oxidation while for goethite and also HFO, data can be explained assuming a combination of Fe(II) adsorption with and without electron transfer. Surface oxidation (electron transfer), leading to adsorbed Fe(III)(OH)2, is favored at high pH (pH > ∼7.5) promoting the deprotonation of two FeIII-OH2 ligands. For goethite, the interaction of Fe(II) with As(III) and vice versa has been modeled too. To explain Fe(II)-As(III) dual-sorbate systems, formation of a ternary type of surface complex is included, which is supposed to be a monodentate As(III) surface complex that interacts with an Fe(II) ion, resulting in a binuclear bidentate As(III) surface complex.  相似文献   

20.
The concentrations of Ca, Mg, Fe, Mn, Cr, Co, Ni, Cu, Zn, Cd and organic carbon were measured in a sediment porewater sampled by two different techniques: in situ dialysis, and centrifugation followed by filtration. Sediment centrifugation at 5,000 rpm followed by filtration (0.45 μm membrane) was equivalent to dialysis for Co, Ni, Cr, Fe, Mn but gave higher and more variable concentrations for Cu, Zn and organic carbon. Concentrations comparable to those obtained by dialysis were found when centrifugation speed was increased to 11,000 rpm and when 0.2 or 0.03 μm membranes were used to filter the supernatant. This procedure was also found equivalent to dialysis for Cr, Co, Ni, Cd and organic carbon. A reduction of the dialysis membrane pore size to 0.002 μm did not produce any apparent change in the porewater composition; however, a further reduction to 0.001 μm indicated either incomplete equilibration after two weeks, or exclusion of medium sized metal-organic complexes. Because of its inherent simplicity, in situ dialysis appears particularly well adapted to the study of trace constituents in sediment porewaters under field conditions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号