共查询到20条相似文献，搜索用时 22 毫秒
1.
Main Structural Styles and Deformation Mechanisms in the Northern Sichuan Basin, Southern China 总被引：3，自引：2，他引：1
The Triassic Jialingjiang Formation and Leikoupo Formation are characterized by thick salt layers. Three tectono-stratigraphic sequences can be identified according to detachment layers of Lower-Middle Triassic salt beds in the northern Sichuan Basin, i.e. the sub-salt sequence composed of Sinian to the Lower Triassic Feixianguan Formation, the salt sequence of the Lower Triassic Jialingjiang Formation and Mid-Triassic Leikoupou Formation, and the supra-salt sequence composed of continental clastics of the Upper-Triassic Xujiahe Formation, Jurassic and Cretaceous. A series of specific structural styles, such as intensively deformed belt of basement-involved imbricated thrust belt, basement-involved and salt-detached superimposed deformed belt, buried salt-related detached belt, duplex, piling triangle zone and pop-up, developed in the northern Sichuan Basin. The relatively thin salt beds, associated with the structural deformation of the northern Sichuan Basin, might act as a large decollement layer. The deformation mechanisms in the northern Sichuan Basin included regional compression and shortening, plastic flow and detachment, tectonic upwelling and erosion, gravitational sliding and spreading. The source rocks in the northern Sichuan Basin are strata underlying the salt layer, such as the Cambrian, Silurian and Permian. The structural deformation related to the Triassic salt controlled the styles of traps for hydrocarbon. The formation and development of hydrocarbon traps in the northern Sichuan Basin might have a bearing upon the Lower-Middle Triassic salt sequences which were favorable to the hydrocarbon accumulation and preservation. The salt layers in the Lower-Middle Triassic formed the main cap rocks and are favorable for the accumulation and preservation of hydrocarbon. 相似文献
2.
南海北部深水区LS33a钻井微体古生物年代地层格架 总被引：1，自引：0，他引：1
南海北部琼东南盆地深水区接收了渐新世以来数千米厚的海相沉积地层,蕴藏着丰富的微体古生物化石。对深水区LS33a钻井岩芯的取样和化石鉴定,识别出21个浮游有孔虫化石带（N22带～P19带）和12个钙质超微化石带（NN19带～NP24带）。通过与大洋钻探（ODP）在南海实施的184航次的钻探结果和“国际年代地层表（2012）”等的对比分析,探讨了化石事件的地质年代意义,构建了LS33a钻井生物年代地层格架。在此基础上,讨论了更新统与上新统、上上新统与下上新统、上新统与中新统、上中新统与中中新统、中中新统与下中新统、中新统与渐新统、上渐新统与下渐新统之间地层界线位置以及崖城组、陵水组、三亚组、梅山组、黄流组、莺歌海组和乐东组地层的时代归属,建立了适用于南海北部深水区的高分辨率综合年代地层格架。 相似文献
3.
库车新生代构造性质和变形时间 总被引：126，自引：6，他引：120
库车构造位于南天山古生代碰撞造山带之南,为塔里木盆地最北的一个构造带。它自北而南可分为边缘逆冲（ 隐伏构造楔） 、斯的克背斜带、北部线性背斜带、拜城盆地、南部背斜带。每个背斜带又包含有若干逆冲断层相关褶皱,它们是断层转折褶皱、断层传播褶皱、滑脱褶皱、断层传播 滑脱混生褶皱、双重逆冲构造、突发构造、三角带构造。底部逆冲断层向南变浅,堆叠逆冲岩席向南变薄,总体上形成一个向南的逆冲构造楔。逆冲断层在斯的克背斜带侵位最早（２５ Ｍａ） ,在北部线性背斜带为１６９ Ｍａ,拜城盆地中的大宛其背斜为３６ Ｍａ,南部背斜带为５３ Ｍａ（ 北部） 和１８ Ｍａ（ 南部） ,变形作用向南变新。库车构造是印 藏板块碰撞的内陆构造响应,是二叠纪前陆盆地复活而成的再生前陆盆地变形带 相似文献
4.
库车再生前陆盆地冲断构造楔特征 总被引：60，自引：4，他引：56
库车再生前陆盆地冲断构造楔由一系列向南运动的逆冲断层和相关褶皱组成。冲断楔的北部以断层转折褶皱、断层传播褶皱、双重逆冲构造为主。断层楔的前缘发育了很好的滑脱膝折背斜,全为盲断层控制,形成隐蔽式前锋。冲断层的就位从中新世开始,自北向南迁移,前锋的构造形成在第四纪。造成逆冲断层的地壳水平缩短作用速度在中新世较慢,平均为0．355mm/a,上新世中期达0．82mm/a,而到上新世晚期和第四纪速度增大了约一个数量级,达到1．29－3mm/a。 相似文献
5.
《Geodinamica Acta》2001,14(1-3):177-195
The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quaternary volcanoes, and (3) a 5-km thick, undeformed Plio-Quaternary continental volcano-sedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional–contractional, and Oligocene-Quaternary in age; whereas it is compressional–extensional, and Plio-Quaternary in age in the east Anatolian plateau and the Lesser Caucasus.Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional–contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (∼ 12 Ma) continent–continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N–S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places. 相似文献
6.
YANG Minghui JIN Zhijun LU Xiuxiang SUN Dongsheng TANG Xuan PENG Gengxin LEI Ganglin 《《地质学报》英文版》2009,83(2)
The eastern Qiulitagh fold and thrust belt (EQFTB) is part of the active Kuqa fold and thrust belts of the northern Tarirn Basin. Seismic reflection profiles have been integrated with surface geologic and drill data to examine the deformation and structure style of the EQFTB, particularly the deformational history of the Dina 2 gas field. Seismic interpretations suggest that Dongqiu 8 is overall a duplex structure developed beneath a passive roof thrust, which generated from a tipline in the Miocene Jidike Formation, and the sole thrust was initiated from the same Jidike Formation evaporite zone that extends westward beneath the Kuqatawu anticline. Dongqiu 5 is a pop-up structure at the western part of the EQFTB, also developed beneath the Jidike Formation evaporite. Very gentle basement dip and steep dipping topographic slope in the EQFTB suggest that the Jidike Formation salt provides effective decoupling. The strong deformation in the EQFTB appears to have developed further south, in an area where evaporite may be lacking. Since the Pliocene, the EQFTB has moved farther south over the evaporite and reached the Yaken area. Restoring a balanced cross-section suggests that the minimum shortening across the EQFTB is more than 7800 m. Assuming that this shortening occurred during the 5.3 Ma timespan, the shortening rate is approximately 1.47 ram/year. 相似文献
7.
Yong Yang Wen-Qian Yao Jia-Jia Yan Ying Guo Da-Qing Xie 《International Geology Review》2018,60(7):929-943
The Piqiang–Selibuya Fault is the most significant fault in the NW Tarim Basin, China. It has attracted increasing attention because of the discovery of a series of oil (gas) fields in and around the fault zone. The structural characteristics and evolution of the Piqiang–Selibuya Fault remain controversial. Field geological surveys and seismic data interpretation reveal that the fault has experienced three stages of activity. The thicknesses of the Permian and Miocene strata on opposing sides of the fault are clearly different, and these reveal that the fault has experienced two stages of significant thrusting. The first stage took place at the end of the Triassic and was associated with the Qiangtang Block amalgamated to the south margin of Eurasia. The second stage occurred at the end of the Miocene and might have been caused by the northwards overthrusting of the Pamir. These two stages of thrusting led to the lower–middle Cambrian detachment layer in the eastern part of the Keping thrust belt being 2 km shallower than in the western part. Since the Pliocene, the southern Tien Shan orogenic belt has been reactivated and thrust towards the interior of the Tarim Basin, and a series of ENE–WSW-trending thrust sheets have formed in the Keping thrust belt. Because of the different depth of the detachment layer on the opposing sides of the Piqiang–Selibuya Fault, the number and spacing of thrust sheets formed to the east of the fault differ from those to the west. This dissimilar deformation led to the strike–slip displacement on the Piqiang–Selibuya Fault. The three stages of fault activity record three important tectonic events in the NW Tarim Basin. Qualitative analysis of this activity helps us better understand the influence of the far-field effect of the collisions that occurred on the southern margin of the Eurasia plate on the structural deformation of the NW Tarim Basin. 相似文献
8.
中国东西部地貌边界带晚新生代构造变形历史与青藏高原东缘隆升过程初步研究 总被引：24，自引：3，他引：24
中国东西部地貌边界带横跨青藏高原东部与扬子地块,成为我国大陆Ⅰ级构造地貌陡变带和地球物理变异带。根据地表构造形迹的组合特征,地貌边界带由3个主要形变系统组成,从北到南它们是:东昆仑—岷山左旋走滑-冲断系统、龙门山—龙泉山冲断-推覆系统、鲜水河—安宁河左旋走滑-冲断系统等。在综合分析各构造系统的组成、变形特征、变形年代学和演化过程等基础上,提出了青藏东缘晚新生代阶段性构造演化模式。指出,晚中新世至早上新世时期,强烈的走滑-冲断变形主要发生在地貌边界带中南段,导致鲜水河—安宁河走滑-冲断系统和龙门山—龙泉山冲断-推覆系统的形成和发展,而东昆仑—秦岭断裂系则以走滑伸展变形为主,沿西秦岭构造带发育走滑拉分盆地和幔源火山喷发活动。晚上新世—早更新世时期,构造运动性质发生了南北反转,强烈的走滑挤压活动主要集中在北段东昆仑—岷山走滑-冲断系统,岷山隆起带在此时期强烈活动而快速崛起;青藏高原东南缘鲜水河—安宁河走滑断裂系统则以走滑伸展变形为主,在深切河谷中发育了昔格达河湖相沉积。中更新世以来,构造形变系统以挤压剪切为主,兼具正向倾滑活动,局部发生断陷作用。基于攀西地区深切河谷的构造地貌分析,提出了青藏东南缘晚新生代4-阶段隆升模式。 相似文献
9.
三江北段东莫扎抓矿区构造变形特征 总被引：3，自引：0，他引：3
已有关于青藏高原隆升的各种构造模型多重视新生代变形而忽略了早期构造变形的限制.本文以三江北段东莫扎抓矿区为研究对象,通过详细的构造-岩相填图,恢复了矿区二叠纪以来变形序列,结合区域资料讨论了变形事件的大地构造背景.研究表明矿区发育中-下二叠统九十道班组灰岩、上二叠统那益雄组碎屑岩、上三叠统结扎群甲丕拉组碎屑岩和上三叠统结扎群波里拉组灰岩4套地层系统,二叠系与三叠系之间为不整合接触,局部被近南北向逆断层代替.北西向逆断层横亘矿区,断层上盘三叠纪碎屑岩和灰岩整体北倾,断层下盘三叠纪岩石被左右两条走滑断层夹持向南挤出.在图面和露头尺度上矿区叠加褶皱明显,南北向剖面上多见紧闭的倾伏褶皱,近东西向剖面上则为开阔水平的斜歪褶皱,表明南北向剖面上观察到的是已被叠加的早期褶皱,为矿区第一期变形,其形成与三叠纪末古特提斯洋盆闭合有关.始新世晚期印-亚大陆碰撞地壳缩短形成矿区第二期构造,即北西向逆断层和褶皱叠加.第三期近南北向逆断层可能形成于始新世末,与印-亚大陆碰撞引起的侧向旋转有关. 相似文献
10.
Peloponnesus in the south-western part of the Aegean is formed by a heterogeneous pile of alpine thrust sheets that was reworked
by normal faulting from Upper Miocene to recent times. Upper Miocene–Lower Pliocene extension in Mt Parnon was accommodated
by several mappable brittle detachment faults that exhibit a top-to-the-NE-ENE sense of shear. The hanging wall of the detachments
comprises a number of highly tilted fault blocks containing abundant evidence of intense internal deformation by normal faulting
and layer-parallel shearing contemporaneous with faulting. These fault blocks are remnants of a cohesive extensional block
that slipped to the NE-ENE and broke up along high-angle normal faults that sole into or are cut by the detachments. The largest
part of this block is located at the eastern edge of the metamorphic core forming the hanging wall of East Parnon high-angle
normal fault that excised part of the aforementioned detachments. The lowermost metamorphic Unit of the nappe-pile does not
seem to be affected by the previous extensional episode. Upper plate reconstruction shows that various units of the nappe-pile
were affected by high-angle normal faults that linked to detachment faults in the weaker layers. Since the Middle-Upper Pliocene
further exhumation of the metamorphic rocks has resulted in the formation of high-angle normal faults overprinting Neogene
extensional structures and cut the entire nappe-pile. This new fault system tilted the earlier extensional structures and
produced a NE-SW coaxial deformation of Mt Parnon. 相似文献
11.
点苍山新生代推覆构造的确立及其地质意义 总被引：2，自引：0，他引：2
点苍山地处三江构造带东缘，其东侧扬子陆块上的古生代地层，越过洱海断裂推覆到苍山西坡的中、新生代地之上：下泥盆统青山组推覆至下白垩统景星组之上；上二叠叠统乌龙坝组及红岩子组推覆在始新统宝相寺组之上。三江构造带中的上三维统歪古村组及三合洞组推覆在上侏罗统坝注路组之上。推覆时期为始新世－上新世，推覆构造机制是陆内汇聚挤压所至。 相似文献
12.
依据丰富翔实的地层古生物资料,首次在内蒙古西部建立了比较完整的第三纪地层层序：命名或厘订了中始新统乌兰乌珠尔组、上始新统查干布拉格组、下渐新统乌兰塔塔尔组、上渐新统、下中新统乌尔图组、上中新统呼和好来组和上新统昂冈浩特组等７个地层单元;区分出了中始新世乌兰乌珠尔、晚始新世查干布拉格、早渐新世早期克克阿木、早渐新世晚期乌兰塔塔尔、晚渐新世因德里沟、早中新世乌尔图、晚中新世呼和好来和上新世昂冈浩特等８个动物群（组合）。 相似文献
13.
Intracontinental foreland basins with fold-and-thrust belts on the southern periphery of the Tianshan orogenic belt in China resulted from still-active contractional deformation ultimately cased by the India–Asia collision. To quantify the amounts of shortening distance and the rates of deformation, and to decipher the architectural framework, we mapped the stratigraphy and structure of four anticlines in the Kuqa and Baicheng foreland thrust belts in the central southern Tianshan. In the Baicheng foreland thrust belts, Lower Cretaceous Baxigai and Bashijiqike Formations located in the core of the Kumugeliemu anticline are overlain by the Paleocene to Eocene Kumugeliemu Formation, above which are conformable Oligocene through Pleistocene sediments. A disharmonic transition from parallel to unconformable bedding at the boundary of the Miocene Kangcun and Pliocene Kuqa Formations suggests a change from pre-detachment folded strata to beds deposited on top of a growing anticline. Most of the anticlines have steep limbs (70–90°) and are box to isoclinal folds, suggestive of detachment folding or faulted detachment folding (faults that transect a fold core or limb). Shortening estimates calculated from the cross-sections by the Excess area method indicate that the total shortening for the Kelasu, Kuchetawu, Kezile and Yaken sections are 6.3 km, 6.4 km, 5.8 km and 0.6 km, respectively, and the respective depths of the detachment zones are (2.3 km and 6.9 km), 2.3 km, 2.5 km and 3.4 km. Time estimates derived from a paleomagnetic study indicate that the transition to syn-folding strata occurred at ∼6.5 Ma at the Kuchetawu section along the Kuqa river. In addition, according to our field observations and previous sedimentary rate studies, the initial time of folding of the Yaken anticline was at 0.15–0.21 Ma. Therefore, the average shortening rate that began at ∼6 Ma was ∼2 mm/a for the Kelasu, Kuchetawu and Kezile sections. At 0.15–0.21 Ma, the average shortening rate increased to 3–4 mm/a in the Yaken section. Combined with the recent GPS data, the shortening rate in the central southern Tianshan area increased to 4.7 ± 1.5 mm/a at present. We suggest that there was a linear increase in shortening rate in the southern Tianshan foreland basin, which also indicates that the far field stress increased considerably from the late Miocene to Present in response to the India–Asia collision. 相似文献
14.
《International Geology Review》2012,54(10):896-915
A 100 km long balanced structural transect is presented for the Patagonian Andes at 50° S Latitude. The area studied is characterized by a fold belt in the eastern Andean foothills and basement-involved thrusts in a western-basement thrust zone. The basement thrust zone exposes pre-Jurassic, polydeformed sedimentary and layered metamorphic rocks emplaced over Lower Cretaceous rocks above an E-vergent thrust located at the western end of the fold belt. The fold belt is developed in a 3 km thick deformed Cretaceous–Paleogene sedimentary cover with few basement outcrops and scarce calc-alkaline magmatism. Cover structures related to shallow décollements have a N-S to NW-SE strike, with fold wavelengths from 1100 to 370 m in the east to 20 to 40 m in the west. However, long-wavelength basement-involved structures related to deeper décollements have a dominant N-S to NE-SW trend along the eastern and western parts of the fold belt. Field evidence showing different degrees of inversion of N-S–trending normal faults suggests that the orientation of the Cenozoic compressive basement structures was inherited partially from the original geometry of Mesozoic normal faults. The deformation propagated toward the foreland in at least two events of deformation. The effects of Paleogene (Eocene?) compressive episode are observed in the western fold belt and a Neogene (Late Miocene) compressive episode is present in the eastern fold belt. Basement-involved structures typically refold older cover structures, producing a mixed thick and thin-skinned structural style. By retrodeforming a regional balanced cross section in the fold belt, a minimum late Miocene shortening of 35 km (26%) was calculated. 相似文献
15.
龙门山中段山前带浅层冲断系统的结构、形成与演化 总被引：4，自引：0，他引：4
本文依据断层相关褶皱几何学原理,对龙门山中段地震剖面进行了精细解释。研究发现,龙门山中段山前带浅层冲断系统存在多套滑脱层,具有上下分层变形特征。浅层滑脱层为上三叠统须家河组三段(T_3~x3)的碳质页岩夹煤层,其上发育双重构造和叠瓦构造;下三叠统嘉陵江组四、五段(T_1j~(4-5))的膏岩层,发育断层传播褶皱、冲起构造和构造楔;深层为下寒武统的泥页岩层,发育断层转折褶皱和滑脱褶皱。该区滑脱断层所控制的地层变形和缩短量各不相同,其中三叠系上统缩短量最大,大于30 km;三叠系下统至古生界地层缩短量约为14.5 km;侏罗系以上的地层缩短量则较小。研究区内的通济场断裂(F_3)为印支末期形成的一套逆冲断层组,其下部交于下寒武统滑脱层,深度约为10 km;关口断层(F_4)和彭县断裂(F_5)为晚侏罗世一早白垩世形成的逆冲断层,下部交与下三叠统嘉陵江组滑脱层,深度大约为8～10 km。这些断层以前展的方式破裂,并且长期活动。龙门山中段自中生代以来存在多期构造事件,主要发生诺利末期、印支晚幕、燕山期和喜马拉雅期。其中,燕山期和喜马拉雅期是龙门山活动最强烈的两个阶段,在龙门山中段山前带表现为大量断裂的长期活动,地壳缩短和龙门山快速隆升,并形成多种构造样式。 相似文献
16.
17.
Structural Evolution of the Eastern Qiulitagh Fold and Thrust Belt,Northern Tarim Basin,China 总被引：4，自引：3，他引：1
YANG Minghui JIN Zhijun LU Xiuxiang SUN Dongsheng TANG Xuan PENG Gengxin LEI Ganglin 《《地质学报》英文版》2009,83(2):347-358
The eastern Qiulitagh fold and thrust belt (EQFTB) is part of the active Kuqa fold and thrust belts of the northern Tarim Basin. Seismic reflection profiles have been integrated with surface geologic and drill data to examine the deformation and structure style of the EQFTB, particularly the deformational history of the Dina 2 gas field. Seismic interpretations suggest that Dongqiu 8 is overall a duplex structure developed beneath a passive roof thrust, which generated from a tipline in the Miocene Jidike Formation, and the sole thrust was initiated from the same Jidike Formation evaporite zone that extends westward beneath the Kuqatawu anticline. Dongqiu 5 is a pop-up structure at the western part of the EQFTB, also developed beneath the Jidike Formation evaporite. Very gentle basement dip and steep dipping topographic slope in the EQFTB suggest that the Jidike Formation salt provides effective decoupling. The strong deformation in the EQFTB appears to have developed further south, in an area where evaporite may be lacking. Since the Pliocene, the EQFTB has moved farther south over the evaporite and reached the Yaken area. Restoring a balanced cross-section suggests that the minimum shortening across the EQFTB is more than 7800 m. Assuming that this shortening occurred during the 5.3 Ma timespan, the shortening rate is approximately 1.47 mm/year. 相似文献
18.
Hiroyuki MAEDA 《Resource Geology》1998,48(3):197-208
Abstract: Neogene magmatism in the Muka mine area in the Kitami metallogenic province was characterized on the basis of K-Ar age data by felsic–to–mafic terrestrial extrusive and intrusive volcanism from Late Miocene to Early Pliocene. The geology of the Muka mine area comprises the Upper Cretaceous-Paleocene Yubetsu Group, consisting primarily of sandstone and shale; Upper Miocene Ikutahara Formation, consisting of clastic and felsic volcaniclastic rocks and Kane-hana Lava (rhyolite) of 7. 5 Ma; Upper Miocene Yahagi Formation, consisting of clastics, felsic volcaniclastics and rhyolite lavas; Late Miocene andesite and rhyolite dikes (Chidanosawa Rhyolite of 7. 2 Ma and Hon-Mukagawa Andesite of 6. 6 Ma); Lower Pliocene Hakugindai Lava (basalt: 4. 0 Ma); and Quaternary System. The volcanism consists of earlier Late Miocene felsic extrusive activity during the sedimentation of the Ikutahara Formation, later Late Miocene felsic extrusive and intrusive activities during the sedimentation of the Yahagi Formation and intermediate intrusive activity after the sedimentation of the Yahagi Formation and Early Pliocene mafic extrusive activity. The Muka gold-silver ore deposit occurs primarily in the felsic volcaniclastic rocks and Kanehana Lava of the Ikutahara Formation and in Hon-Mukagawa Andesite. These wall–rocks, the clastic rocks of the Ikutahara Formation and the clastic and felsic volcaniclastic rocks of the Yahagi Formation were affected to various extents by hydrothermal alteration. The hydrother-mal alteration can be divided into two stages (early and late) based on the modes of occurrence and mineral assemblages. Early hydrothermal alteration is characterized by regional and vein-related alterations associated with epithermal gold-silver mineralization in a near-neutral hydrothermal system. Regional alteration can be subdivided into a zeolite zone (mordenite+adularia±heulandite–clinoptilolite series mineral±smectite±quartz°Cristobalite±opal–CT) and a smectite zone (smec–tite±quartz±opal–CT). Vein-related alteration can be subdivided into a K-feldspar zone (quartz+adularia±illite±interstratified illite/smectite±pyrite), an illite zone (quartz+illite°Chlorite±interstratified illite/smectite±smectite±pyrite) and an interstratified illite/smectite zone (quartz+interstratified illite/smectite±smectite±pyrite). The adularization age of 6. 8 Ma in the K-feldspar zone that developed in Kanehana Lava hosting ore veins coincides well with the epithermal gold-silver mineralization age of 6. 6 Ma. Late hydrothermal alteration is characterized by a kaolinite zone (kaolinite±dickite±alunite±quartz°Cristobalite± tridymite±pyrite) in an acid hydrothermal system, and cuts early alteration zones such as the K-feldspar zone. Other modes of occurrence of acid alteration are a 7Å halloysite-kaolinite vein in the hydrothermal explosion breccia dike and smectite–kaoli–nite veins along joint planes of Kanehana Lava. The style of the gold-silver deposit associated with early near-neutral hydrothermal alteration is a low-sulfidation epithermal type. The low-sulfidation epithermal gold-silver mineralization of 6. 6 Ma in the vicinity of the Muka ore deposit was essentially accompanied by felsic volcanic activity during the sedimentation of the Yahagi Formation, and was closely related both temporally and spatially to the felsic intrusive activity of Chidanosawa Rhyolite of 7. 2 Ma. The related hydrother-mal activity of the gold-silver mineralization took place at intervals of approximately 0. 4–0. 6 Ma after the volcanic activity related to the mineralization. 相似文献
19.
《Geodinamica Acta》2001,14(1-3):147-158
Central Anatolia has undergone complex Neotectonic deformation since Late Miocene–Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE–SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone.Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N–S convergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE–SW-trending extensional basin developed on this plateau in Late Miocene–Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline–alkaline volcanics. The volcanic sequence is unconformably overlain by Pliocene lacustrine–fluviatile deposits intercalated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained clastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional Hırka–Kızılırmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene–Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazlığı pull-apart basins. The Sultansazlığı basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Dağı).The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedge-like Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate. 相似文献
20.
乌泊尔断裂带位于帕米尔构造结东北缘,作为揭示青藏高原形成与演化历史的关键地区之一,为碰撞造山作用提供了详细信息,因此厘清乌泊尔断裂带关键构造的形成演化具有重要意义。为研究该断裂带的几何学与运动学特征,本文利用钻测井资料、二维地震反射资料、DEM 高程资料以及喀什地区1∶100 000地质图,以断层相关褶皱理论为指导,对乌泊尔断裂带进行精细构造解析。研究认为,乌泊尔断裂沿走向至少可分为东、西两段,西段构造变形强烈,而东段较弱,构造样式沿断裂走向上有较大差异;垂直于构造走向上可划分出两个等倾角区;乌泊尔地区的变形最早于中新世早期开始,自上新世以来构造变形强烈,乌泊尔断裂在该区域的活动起始于第四纪,具有幕式活动的特点;通过断层相关褶皱分析得到,自中新世至上新世,断裂东段的构造缩短量至少为9.47 km,第四纪以来的构造缩短量至少为11.65 km。第四系生长地层的内部结构受控于基底叠瓦构造和乌泊尔断裂,明确深浅构造的关系能较好得限定研究区关键构造的形成演化过程,可作为复杂构造解析的有效方法。 相似文献