首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Daily resolution data retrieved from the 1243 ground-based Global Positioning System (GPS) stations in Japan are utilized to expose surface displacements before the destructive M9 Tohoku-Oki earthquake (March 11, 2011). Variations in the residual GPS data, in which effects of the long-term plate movements, short-term noise and frequency-dependent variations have been removed through a band-pass filter via the Hilbert–Huang transform, are compared with parameters of the focal mechanism associated with the Tohoku-Oki earthquake for validation. Analytical results show that the southward movements, which were deduced from the residual displacements and agree with the strike of the rupture fault, became evident on the 65th day before the Tohoku-Oki earthquake. This observation suggests that the shear stress played an important role in the seismic incubation period. The westward movements, which are consistent with the angle of the maximum horizontal compressive stress, covered entire Japan and formed an impeded area (142°E, 42°N) about 75 km away from the epicenter on the 47th day prior to the earthquake. The horizontal displacements integrated with the vertical movements from the residual GPS data are very useful to construct comprehensive images in diagnosing the surface deformation from destructive earthquakes along the subduction zone.  相似文献   

2.
NE Iran, including the Kopeh Dagh and Allah Dagh-Binalud deformation domains, comprises the northeastern boundary of the Arabia–Eurasia collision zone. This study focuses on the evolution of the Plio-Quaternary tectonic regimes of northeast Iran. We present evidence for drastic temporal changes in the stress state by inversion of both geologically and seismically determined fault slip vectors. The inversions of fault kinematics data reveal distinct temporal changes in states of stress during the Plio-Quaternary (since ～ 5 Ma). The paleostress state is characterized by a regional transpressional tectonic regime with a mean N140 ± 10°E trending horizontal maximum stress axis (σ1). The youngest (modern) state of stress shows two distinct strike-slip and compressional tectonic regimes with a regional mean of N030 ± 15°E trending horizontal σ1. The change from the paleostress to modern stress states has occurred through an intermediate stress field characterized by a mean regional N trending σ1. The inversion analysis of earthquake focal mechanisms reveals a homogeneous, transpressional tectonic regime with a regional N023 ± 5°E trending σ1. The modern stress state, deduced from the youngest fault kinematics data, is in close agreement with the present-day stress state given by the inversions of earthquake focal mechanisms. According to our data and the deduced results, in northeast Iran, the Arabia–Eurasia convergence is taken up by strike-slip faulting along NE trending left-lateral and NNW trending right-lateral faults, as well as reverse to oblique-slip reverse faulting along NW trending faults. Such a structural assemblage is involved in a mechanically compatible and homogeneous modern stress field. This implies that no strain and/or stress partitioning or systematic block rotations have occurred in the Kopeh Dagh and Allah Dagh-Binalud deformation domains. The Plio-Quaternary stress changes documented in this paper call into question the extrapolation of the present-day seismic and GPS-derived deformation rates over geological time intervals encompassing tens of millions of years.  相似文献   

3.
The Jiashian earthquake (ML 6.4) occurred on 4 March 2010. It was the largest inland event in southern Taiwan of 2010. The mainshock location was unexpected since it occurred in an area with relatively low background seismicity. In addition, reports of earthquake focal mechanisms do not fit with any known active fault geometry. In order to understand the origin of this earthquake, especially its rupture process, we perform a joint source inversion by using teleseismic body wave, GPS coseismic displacements and near field ground motion data. In this study, we considered a northwest–southeast trending fault with a northeast dip retrieved from GPS coseismic data and aftershocks distribution. To analyze the detailed slip distribution in space and time, we used near field 3D Green’s functions provided by spectral-element method and a full time–space inversion technique. We find a complex rupture process with several slip patches distributed inside two main asperities. The slip map reveals a mean slip of 12.9 cm for a maximum slip of 27.3 cm leading to a Mw 6.47 for this event. The rupture initiates in the deepest portion of the fault at 20 km depth, and propagated upward up to 2 km depth to form the two asperities. The source time function of this event revealed two pulses corresponding to the two asperities, for a total duration time of about 16 s. Most aftershocks occurred near the upper boundary of the deepest asperity while no aftershocks are located close to the shallowest one. We infer that the locations of these slip patches are related to the surrounding fault systems that may have restricted the rupture propagation during the earthquake.  相似文献   

4.
The May 12, 2008, Mw 7.9 Wenchuan earthquake was induced by failure of two of the major faults of the Longmen Shan thrust fault zone along the eastern margin of Tibet Plateau. Our study focused on trenches across the Yingxiu–Bichuan fault, the central fault in the Longmen Shan belt that has a coseismic surface break of more than 200 km long. Trenching excavation across the 2008 earthquake rupture on three representative sites reveals the styles and amounts of the deformation and paleoseismicity along the Longmen Shan fault. Styles of coseismic deformation along the 2008 earthquake rupture at these three sites represent three models of deformation along a thrust fault. Two of the three trench exposures reveal one pre-2008 earthquake event, which is coincident with the pre-existing scarps. Based on the observation of exposed stratigraphy and structures in the trenches and the geomorphic expressions on ground surface, we interpret the 2008 earthquake as a characteristic earthquake along this fault. The interval of reoccurrence of large earthquake events on the Central Longmen Shan fault (the Yingxiu–Beichuan fault) can be inferred to be about 11,000 years according to 14C and OSL dating. The amounts of the vertical displacement and shortening across the surface rupture during the 2008 earthquake are determined to be 1.0–2.8 m and 0.15–1.32 m, respectively. The shortening rate and uplift rate are then estimated to be 0.09–0.12 mm/yr and 0.18–0.2 mm/yr, respectively. It is indicated that the deformation is absorbed mainly not by shortening, but by uplift along the rupture during the 2008 earthquake.  相似文献   

5.
On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.  相似文献   

6.
The Philippine Fault results from the oblique convergence between the Philippine Sea Plate and the Sunda Block/Eurasian Plate. The fault exhibits left-lateral slip and transects the Philippine archipelago from the northwest corner of Luzon to the southeast end of Mindanao for about 1200 km. To better understand fault slip behavior along the Philippine Fault, eight GPS surveys were conducted from 1996 to 2008 in the Luzon region. We combine the 12-yr survey-mode GPS data in the Luzon region and continuous GPS data in Taiwan, along with additional 15 International GNSS Service sites in the Asia-Pacific region, and use the GAMIT/GLOBK software to calculate site coordinates. We then estimate the site velocity from position time series by linear regression. Our results show that the horizontal velocities with respect to the Sunda Block gradually decrease from north to south along the western Luzon at rates of 85–49 mm/yr in the west–northwest direction. This feature also implies a southward decrease of convergence rate along the Manila Trench. Significant internal deformation is observed near the Philippine Fault. Using a two dimensional elastic dislocation model and GPS velocities, we invert for fault geometries and back-slip rates of the Philippine Fault. The results indicate that the back-slip rates on the Philippine Fault increase from north to south, with the rates of 22, 37 and 40 mm/yr, respectively, on the northern, central, and southern segments. The inferred long-term fault slip rates of 24–40 mm/yr are very close to back-slip rates on locked fault segments, suggesting the Philippine Fault is fully locked. The stress tensor inversions from earthquake focal mechanisms indicate a transpressional regime in the Luzon area. Directions of σ1 axes and maximum horizontal compressive axes are between 90° and 110°, consistent with major tectonic features in the Philippines. The high angle between σ1 axes and the Philippine Fault in central Luzon suggests a weak fault zone possibly associated with fluid pressure.  相似文献   

7.
The present article is the first time reporting of a paleoearthquake that occurred during Late Pleistocene time along the Nalagarh Thrust (NT) in the Pinjaur Dun in northwestern sub-Himalaya. Using CORONA satellite photographs, multi-spectral IRS satellite data, and aerial photographs, a prominent active fault has been identified at Nalagarh in Pinjaur Dun. This fault in the alluvial fan is located very close to the NT which borders the topographic front of the Tertiary rocks against Quaternary deposits. A trench excavation survey was carried out at Nalagarh for detailed paleoseismic studies across this thrust fault. Displacing all the lithologic units of the fan sequence, the fault plane has an average dip of 30° due ENE and a vertical displacement of 1.6 m and slip of ～2.5 m along the fault. The lithological units, consisting of alternating sand and gravel, show back tilting and asymmetrical tight folding. Based on Optically Stimulated Luminescence (OSL) ages, the oldest litho-unit in the trench is 85.83 ± 7.2 ka and the youngest is 67.05 ± 8.4 ka. The OSL age of the sample collected from the easterly exposure of the fault shows an age of 20 ka. The faulting and associated induced deformation features suggest occurrence of a Late Pleistocene large magnitude earthquake along NT in the Nalagarh region of the Pinjaur Dun following the deposition of the Quaternary sedimentary units. The Late Pleistocene fault substantiates the seismic potential of Pinjaur Dun and calls for more exhaustive study of paleoearthquakes in this fast developing industrial belt and highly populous mountainous region.  相似文献   

8.
The rupture process of the disastrous Sumatra–Andaman earthquake of 26 December 2004 was analyzed by array processes for teleseismic P-waves recorded by a dense broadband seismic array in Taiwan with epicentral distances of close to 31°. The azimuthal variation from the BATS array center to both ends of the rupture fault is approximately 21°, which is larger than that reported previously for seismic arrays used to image the rupture process of this earthquake, thereby providing a high spatial resolution in studying the source rupture behavior. Two array-processing methods were used to analyze teleseismic P-wave trains. Both analyses were based on data recorded by a broadband network, covering a region of 200 × 400 km, with the aim of evaluating the rupture behavior of the earthquake. Consistent results from both analyses indicate that the earthquake had a rupture duration exceeding 500 s, with major asperities encountered at 80, 260, and 330 s after the initiation of rupturing. We traced the ruptured fault for more than 1200 km from the point of initial rupture. The average rupture velocity was approximately 3.0 km/s and the major northward rupture propagation began at 80 s after the initiation of rupturing.  相似文献   

9.
The study area is the Van earthquake region. It is located in the western section of the East Anatolian–Iranian plateau outside and to the east of the Karlıova triple junction. Based on the tectonic periods, the rock units exposed in the study area are classified into two common categories. These are the Pre-Late Pliocene paleotectonic units and the Plio-Quaternary neotectonic units. The Paleotectonic units are composed of the Yüksekova Complex of Campanian–Maastrichtian age and the Kırkgeçit Formation of Oligo-Miocene age. The paleotectonic units are intensely deformed (folded, thrust to reverse faulted and converted into an imbricate stack). The neotectonic units are composed of fluvio-lacustrine sedimentary facies with volcanic interclations. It is full of soft-sedimentary structures such as deltaic structure, slump fold, sand dikes to sills and normal to reverse types of growth faults which imply to a sedimentation accompanied by both a volcanic activity and active tectonics. Originally the Paleotectonic units are overlain with an angular unconformity by the nearly flat-lying neotectonic units. This angular unconformity and the big difference in the deformational patterns of both categories of rock units indicate an inversion in tectonic regime in Late Pliocene. The new tectonic regime is the strike-slip faulting-dominated neotectonic regime. It is governed by an approximately N–S-directed compression, and composed of NW- to NE-trending strike-slip faults, N–S trending oblique-slip normal faults to fissures and the E–W trending thrust to reverse faults. Most of thrust to reverse faults are inherited from the Pre-Late Pliocene paleotectonic regime. Some of them have reactivated and led to the occurrence of large and devastative earthquakes. The last devastative seismic event is the 23 October 2011 Tabanlı (Van) earthquake of Mw = 7.2 that caused 644 deaths and moderate to heavy damage of ¼ of structures (28,532) in Van earthquake region. The source of the Tabanlı earthquake is the Everek erosional reverse fault. In addition the Tabanlı earthquake is the largest seismic event occurred till now in Turkey. It was followed by a series (over 6000) of small-sized aftershocks and severeal moderate-sized indepentent earthquakes of reverse, normal and strike-slip faulting origin. Both the field and new seismic data strongly reveal that the prominent tectonic regime in the East Anatolian plateau is the strike-slip neotectonic regime, not the tensional tectonic regime as has been reported in some previous works. The strike-slip faulting and related deformation are confined into the upper shallowing part (up to 40 km) of the crust, whilst the extensional deformations are the subcrustal processes and being taking place in a squashy zone at the depths of approximately 40–60 km.  相似文献   

10.
In this paper we show the seismicity and velocity structure of a segment of the Alpine retro-belt front along the continental collision margin of the Venetian Alps (NE Italy). Our goal is to gain insight on the buried structures and deep fault geometry in a “silent” area, i.e., an area with poor instrumental seismicity but high potential for future earthquakes, as indicated by historical earthquakes (1695 Me = 6.7 Asolo and 1936 Ms = 5.8 Bosco del Cansiglio). Local earthquakes recorded by a dense temporary seismic network are used to compute 3-D Vp and Vp/Vs tomographic images, yielding well resolved images of the upper crust underneath the south-Alpine front. We show the presence of two main distinct high Vp S-verging thrust units, the innermost coincides with the piedmont hill and the outermost is buried under a thick pile of sediments in the Po plain.Background seismicity and Vp/Vs anomalies, interpreted as cracked fluid-filled volumes, suggest that the NE portion of the outermost blind thrust and its oblique/lateral ramps may be a zone of high fluid pressure prone to future earthquakes.Three-dimensional focal mechanisms show compressive and transpressive solutions, in agreement with the tectonic setting, stress field maps and geodetic observations. The bulk of the microseismicity is clustered in two different areas, both in correspondence of inherited lateral ramps of the thrust system. Tomographic images highlight the influence of the paleogeographic setting in the tectonic style and seismic activity of the region.  相似文献   

11.
To investigate subsurface structure and seismogenic layers, 3D velocity inversion was carried out in the source zone of 1905 Kangra earthquake (M8.0) in the northwestern Himalaya. P-wave and S-wave phase data of 159 earthquakes recorded by a network of 21 stations were used for this purpose. Inverted velocity tomograms up to a depth range of 18 km show significant variations of 14% in Vp and Vs and 6% in the Vp/Vs across the major tectonic zones in the region. Synthesis of seismicity pattern, velocity structure, distinctive focal mechanisms coupled with nature of stress distribution allows mapping of three different source regions that control regional seismotectonics. Accumulating strains are partly consumed by sliding of Chamba Nappe to the southwest through reverse-fault movements along Chamba/Panjal/Main Boundary Thrusts. This coupled with normal-fault type displacements along Chenab Normal Fault in the north account for low magnitude widespread seismicity in upper 8–10 km of the crust. At intermediate depths from 8 to 15 km, adjusting to residual compressive stresses, the detachment or lower end of the MBT slips to produce thrust dominated seismicity. Nucleation of secondary stresses in local NE–SW oriented structure interacts in complex manner with regional stresses to generate normal type earthquakes below the plane of detachment and therefore three seismic regimes at different depths produce intense seismicity in a block of 30 × 30 km2 centered NE to the epicenter of Kangra earthquake.  相似文献   

12.
Coseismic displacements play a key role in understanding earthquake dynamics. To derive displacement fields from optical and microwave remote sensing datasets, various methods are available. This study evaluated in detail the offset tracking technique on optical ASTER data for 2005 Kashmir earthquake. This technique required input parameters like resampling methods, correlator types, window sizes and step sizes. For accurate displacement field calculation, careful selection of these parameters is imperative which depends on the study area and dataset characteristics. In the study, we made relative comparisons of coseismic displacement fields calculated by using different combinations of input parameters. The results were validated by field based displacement data of vertical separation. Validation was based on the hypothesis that horizontal displacement component may also have vertical component contribution depending upon local characteristics of the fault. Validation results showed that general trend of the measured displacements was in agreement with the field data. Field measurements were bounded within the uncertainty limits of the technique however at some locations significant deviations were also observed. All the coseismic displacement results obtained by using different input parameter were within the uncertainty limit ±1/10 of the pixel size, except for window size 4 × 4 and 8 × 8. The measured component of the fault rupture for northwest of Muzaffarabad is irregular. It may be due to rugged topography as compared to southeast part. The measured fault rupture also coincided to surface rupture mapped in the field. Analysis of the results showed that in comparison to standard parameter set, defined in the literature (Sinc resampling method, Frequential correlator with window size 32 × 32 and step size 8), selection of resampling method and correlator type had no significant effect on the calculated displacement field. However, window size and step size were found to be the most important parameters of the technique. This study showed that changing the window size does not affect the detection limit of the technique but induces bias in the calculations. Step size is used in relation to window size, however relatively larger step size is found to provide better sensitivity and accuracy of the technique.  相似文献   

13.
The 2004 Mid-Niigata Prefecture earthquake sequence (mainshock magnitude, MJMA 6.8), which occurred in an active fold-and-thrust belt in northern central Japan, generated a small thrust surface rupture (< 20 cm of vertical displacement) along a previously unmapped northern extension of the active Muikamachi–Bonchi–Seien fault zone, on the eastern margin of the epicentral region. To better understand past seismic behavior of the rupture, we conducted a paleoseismic trenching study across the 10-cm-high west-side-up surface rupture at the foot of a pre-existing 1.8-m-high east-facing scarp, which probably resulted from past earthquake(s). A well-defined west-dipping thrust fault zone accompanied by drag folding and displacing the upper Pliocene to lower Pleistocene strata and the unconformably overlying upper Pleistocene (?) to Holocene strata was exposed. The principal fault zone is connected directly to the 2004 surface rupture. From the deformational characteristics of the strata and radiocarbon dating, we inferred that two large paleoseismic events occurred during the past 9000 years prior to the 2004 event. These two pre-2004 events have a nearly identical fault slip (at minimum, 1.5 m), which is ≥ 15 times that of the 2004 event (∼ 10 cm). These paleoseismic data, coupled with the geological and geomorphological features, suggest that the 2004 event represented non-characteristic behavior of the fault, which can potentially generate a more destructive earthquake accompanied by meter-scale surface displacement. This study provides insight into the interpretation of past faulting events and increases our understanding of rupture behavior.  相似文献   

14.
The Hengshan massif is an exhumed, mid-crustal, plutonic–metamorphic dome formed during Cretaceous crustal extension in the Jiangnan orogenic belt, central South China. Multiple thermochronometers (mica 40Ar/39Ar, apatite fission track and zircon (U–Th)/He) are applied to its footwall along a slip-parallel transect to quantify its thermal history and cooling rate, and the slip magnitude, rate, initial geometry and kinematic evolution of the low-angle Hengshan detachment fault. Our thermochronological data, in conjunction with previous ages, indicate that (1) footwall rocks cooled from ~ 700 °C to ~ 60 °C in less than 60 Myr (136–80 Ma) at variable rates ranging from ~ 50 °C/Myr to ~ 13 °C/Myr, (2) the Hengshan detachment fault accommodated ~ 8–12 km of total slip at variable slip rates from 0.14 to 1 mm/yr during tectonic exhumation, (3) the footwall has been tilted ~ 26°–50° to the east since slip began, indicating that the low-angle Hengshan detachment fault initiated at a steep dip and was passively rotated to a more gentle orientation during subsequent normal slip. This study provides compelling evidence supporting that the low-angle detachment fault in the extensional dome can be generated by the reactivation and passive rotation of an initially steep reverse fault during normal slip. In addition, our thermochronological data constrain the time of extension in the Hengshan dome between 136 and 80 Ma, which implies that the back-arc extension within South China associated with the rollback of the Paleo-Pacific slab might have lasted until at least 80 Ma.  相似文献   

15.
A Mw 6.3 magnitude earthquake occurred on October 6, 2008 in southern Damxung County within the N–S trending Yangyi graben, which forms the northern section of the Yadong-Gulu rift of south-central Tibet. The earthquake had a maximum intensity of IX at the village of Yangyi (also Yangying) (29°43.3′N; 90°23.6′E) and resulted in 10 deaths and 60 injured in this sparsely populated region. Field observations and focal mechanism solutions show normal fault movement occurred along the NNE-trending western boundary fault of the Yangyi graben, in agreement with the felt epicenter, pattern of the isoseismal contours, and distribution of aftershocks. The earthquake and its tectonic relations were studied in detail to provide data on the seismic hazard to the nearby city of Lhasa.The Damxung earthquake is one of the prominent events along normal and strike-slip faults that occurred widely about Tibet before and after the 2008 Mw 7.9 magnitude Wenchuan earthquake. Analysis of these recent M ? 5.0 earthquake sequences demonstrate a kinematic relation between the normal, strike-slip, and reverse causative fault movements across the region. These earthquakes are found to be linked and the result of eastward extrusion of two large structural blocks of central Tibet. The reverse and oblique-slip surface faulting along the Longmenshan thrust belt at the eastern margin of the Tibetan Plateau causing the Wenchuan earthquake, was the result of eastward directed compression and crustal shortening due to the extrusion. Prior to it, east–west extensional deformation indicated by normal and strike-slip faulting events across central Tibet, had led to a build up of the compression to the east. The subsequent renewal of extensional deformational events in central Tibet appears related to some drag effect due to the crustal shortening of the Wenchuan event. Unraveling the kinematical relation between these earthquake swarms is a very helpful approach for understanding the migration of strong earthquakes across Tibet.  相似文献   

16.
This study analyzed the rupture directivity of the 2011 Tohoku earthquake by using 100-s Rayleigh-wave travel-times, influenced by the finite source, to derive the fault parameters of the earthquake. The results demonstrated that the earthquake exhibited a slow rupture propagation with a rupture velocity of approximately 1.5–2.0 km/s and asymmetric bilateral faulting. The two rupture directions were N60°E and N127°E, with rupture lengths of approximately 276 km and 231 km, respectively. The rupture toward N60°E had a source duration of approximately 183 s, longer than that toward N127°E (approximately 156 s). Overall, the entire source duration of the earthquake faulting lasted approximately 183 s. Regarding historical seismicity in eastern Japan, the 2011 Tohoku earthquake not only ruptured a locked area in which large earthquakes have rarely occurred, but also ruptured the source regions of several historical earthquakes. With the exception of its slow rupture velocity and generation of a tsunami, the rupture features of the 2011 Tohoku earthquake were inconsistent with those of typical tsunami earthquakes.  相似文献   

17.
The Aegean region including western Turkey, mainland Greece, and the Hellenic Arc is the most seismological and geodynamical active domain in the Alpine Himalayan Belt. In this study, we processed 3 years of survey-mode GPS data and present the analysis of a combination of geodetic and seismological data around Izmir, which is the third most populated city in Turkey. The velocities obtained from 15 sites vary between 25 mm/yr and 28 mm/yr relative to the Eurasian plate. The power law exponent of earthquake size distribution (b-value) ranges from 0.8 to 2.8 in the Izmir region between 26.2°E and 27.2°E. The lowest b-value zones are found along Karaburun Fault (b = 0.8) and, between Seferihisar and Tuzla Faults (b = 0.8). A localized stress concentration is expected from numerical models of seismicity along geometrical locked fault patches. Therefore, areas with lowest b-values are considered to be the most likely location for a strong earthquake, a prediction that is confirmed by the 2005 Mw = 5.9 Seferihisar earthquake sequences, with epicentres located to the south of the Karaburun Fault. The north–south extension of the Izmir area is corroborated by extension rates up to 140 nanostrain/yr as obtained from our GPS data. We combined the 3-year GPS velocity field with the published velocity field to determine the strain rate pattern in the area. The spatial distribution of b-value reflects the normal background due to the tectonic framework and is corroborated by the geodetic data. b-Values correlate with strain pattern. This relationship suggests that decrease of b-values signifies accumulating strain.  相似文献   

18.
A kinematic and geochronological study has been carried out on the Triassic high-strain shear zones in Hainan Island, the southern South China Block. There are WNW- and NE-trending high-strain shear zones with greenschist- to amphibolite-facies metamorphism in this island. Kinematic indicators suggest a dextral top-to-the-NNE thrust shearing for the WNW-trending high-strain shear zones and a sinistral top-to-the-SE thrust shearing for the NE-trending shear zones. The quartz c-axis orientations of mylonitic rocks exhibit the domination of basal slip and some activation of a rhombohedra gliding system. The timing of shearing for these shear zones has been constrained by the 40Ar/39Ar dating analyses of synkinematic minerals. Middle Triassic (242–250 Ma) and late Triassic–early Jurassic (190–230 Ma) have been identified for the WNW- and NE-trending shear zones, respectively. A synthesis of these kinematic and thermogeochronological data points to a two-stage tectonic model for Hainan Island, that is, top-to-the-NNE oblique thrusting at 240–250 Ma followed by top-to-the-SE oblique thrusting at 190–230 Ma. In combination with the available data from the southern South China and Indochina Blocks, it is inferred that South Hainan and North Hainan have affinity to the Indochina and South China Blocks, respectively. The tectonic boundary between South Hainan and North Hainan lies roughly along the WNW-trending Changjiang–Qionghai tectonic zone probably linking to the Song Ma and Ailaoshan zones. The middle Triassic structural pattern of Hainan Island is spatially and temporally compatible with those of the South China and Indochina Blocks, and thus might be a derivation from the amalgamation of the Indochina with South China Blocks in response to the closure of the Paleotethys Ocean and subsequent subduction/collision.  相似文献   

19.
Borehole breakout data from 134 wells located within the Kutai Basin region, East Kalimantan were analyzed to determine the present day regional horizontal stress alignments. The data were extracted from various types of dipmeter logs. The study reveals that the majority of the data give a coherent picture of breakout orientation. The mean azimuths for the entire-unweighted, ellipticity-weighted and magnitude-weighted data sets are preferentially aligned in the regional-mean direction of 48.9° N or 128.9° N. Most of the data have a low dispersion value (So) and the ranking of reliability in Zoback’s classification is ‘A’. There is no significant azimuth variation with depth. These relatively consistent alignments of breakout azimuths indicate that the maximum regional stress direction in the study area is NW–SE. This regional-mean of breakout azimuths deviates from the axis of the anticlinorium trends and from the strike of the thrust–fault patterns in the region. It is believed that these structural patterns are influenced by reactivation of weak zones related to sediment loading (structural inversion).  相似文献   

20.
We perform 3D modeling of earthquake generation of the Xianshuihe fault, southwestern China, which is a highly active strike-slip fault with a length of about 350 km, in order to understand earthquake cycles and segmentations for a long-term forecasting and earthquake nucleation process for a short-term forecasting. Historical earthquake data over the last 300 years indicates repeated periods of seismic activity, and migration of large earthquake along the fault during active seismic periods. To develop the 3D model of earthquake cycles along the Xianshuihe fault, we use a rate- and state-dependent friction law. After analyzing the result, we find that the earthquakes occur in the reoccurrence intervals of 400–500 years. Simulation result of slip velocity distribution along the fault at the depth of 10 km during 2694 years along the Xianshuihe fault indicates that since the third earthquake cycle, the fault has been divided into 3 parts. Some earthquake ruptures terminate at the bending part of the fault line, which may means the shape of the fault line controls how earthquake ruptures. The change of slip velocity and displacement at 10 km depth is more tremendous than the change of the shallow and deep part of the fault and the largest slip velocity occurs at the depth of 10 km which is the exact depth of the seismic zone where fast rupture occurs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号