首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
High‐temperature solid‐state electrochemistry techniques (EMF method) were used to measure the oxygen fugacity (fO2) of the ordinary chondrites Ochansk (H4), Savtschenskoje (LL4), Elenovka (L5), Vengerovo (H5), and Kharkov (L6). The fO2 results are presented in the form of the following equations: It was found that fO2 regularly increases from H chondrites to LL chondrites. Measured fO2 are ~1.5 higher than those previously calculated from mineral assemblages. Kharkov (L6) is a little more oxidized than Elenovka (L5) in agreement with the progressive oxidation model. At the same time, Ochansk (H4) is more oxidized than Vengerovo (H5) and exhibits a slightly different slope compared to other chondrites and at T > 1200 K, becomes more reduced than Kharkov (L6) or Elenovka (L5). Measured oxygen fugacity values of meteorites fall within (0.1–1.0)·log fO2 of one another. The possible explanation of discrepancies between measured and calculated values is discussed.  相似文献   

2.
Abstract— Antarctic meteorite Miller Range (MIL) 03346 is a nakhlite composed of 79% clinopyroxene, ?1% olivine, and 20% vitrophyric intercumulus material. We have performed a petrological and geochemical study of MIL 03346, demonstrating a petrogenetic history similar to previously discovered nakhlites. Quantitative textural study of MIL 03346 indicates long (>1 × 101 yr) residence times for the cumulus augite, whereas the skeletal Fe‐Ti oxide, fayalite, and sulfide in the vitrophyric intercumulus matrix suggest rapid cooling, probably as a lava flow. From the relatively high forsterite contents of olivine (up to Fo43) compared with other nakhlites and compositions of augite cores (Wo38–42En35–40Fs22–28) and their hedenbergite rims, we suggest that MIL 03346 is part of the same or a similar Martian cumulate‐rich lava flow as other nakhlites. However, MIL 03346 has experienced less equilibration and faster cooling than other nakhlites discovered to date. Calculated trace element concentrations based upon modal abundances of MIL 03346 and its constituent minerals are identical to whole rock trace element abundances. Parental melts for augite have REE patterns that are approximately parallel with whole rock and intercumulus melt using experimentally defined partition coefficients. This parallelism reflects closed‐system crystallization for MIL 03346, where the only significant petrogenetic process between formation of augite and eruption and emplacement of the nakhlite flow has been fractional crystallization. A model for the petrogenesis of MIL 03346 and the nakhlites (Nakhla, Governador Valadares, Lafayette, Yamato‐000593, Northwest Africa (NWA) 817, NWA 998) would include: 1) partial melting and ascent of melt generated from a long‐term LREE depleted mantle source, 2) crystallization of cumulus augite (± olivine, ± magnetite) in a shallow‐level Martian magma chamber, 3) eruption of the crystal‐laden nakhlite magma onto the surface of Mars, 4) cooling, crystal settling, overgrowth, and partial equilibration to different extents within the flow, 5) secondary alteration through hydrothermal processes, possibly immediately succeeding or during emplacement of the flow. This model might apply to single—or multiple—flow models for the nakhlites. Ultimately, MIL 03346 and the other nakhlites preserve a record of magmatic processes in volcanic rocks on Mars with analogous petrogenetic histories to pyroxene‐rich terrestrial lava flows and to komatiites.  相似文献   

3.
Abstract— We petrologically examined the Miller Range (MIL) 03346 nakhlite. The main‐phase modal abundances are 67.7 vol% augite, 0.8 vol% olivine, and 31.5 vol% mesostasis. Among all known nakhlites, MIL 03346's modal abundance of olivine is the smallest and of mesostasis is the largest. Augite occurs as cumulus phenocrysts having a homogeneous core composition (En36–38Fs24–22Wo40), which is identical with other nakhlites. They accompany thin ferroan rims divided into inner and outer rims with a compositional gap at the boundary between the two rims. Olivine grains have magnesian cores (Fa ≥ 55) and show normal zoning toward ferroan rims (Fa ≤ 84). Mesostasis consists mostly of glass (26.0 vol%) with minor skeletal fayalites, skeletal titanomagnetites, acicular phosphate, massive cristobalite, and sulfides. We conclude that MIL 03346 is the most rapidly cooled nakhlite among all known nakhlites based on the petrography. We obtain the intercumulus melt composition for MIL 03346 from the mass balance calculation using the modal abundances and discuss the crystallization sequence of MIL 03346 in comparison with that of Yamato (Y‐) 000593. Although magnesian olivines of Y‐000593 are phenocrystic, magnesian olivine grains of MIL 03346 seem to have texturally crystallized from the intercumulus melt. After the MIL 03346 magma intruded upward to the Martian surficial zone, the magnesian olivine crystallized, and then the ferroan inner rim formed on phenocrystic core augite. The outer rim of phenocrystic augites formed after the crystallization of skeletal fayalites and skeletal titanomagnetites, resulting in a compositional gap between the inner and outer rims. Finally, glassy mesostasis formed from the residual melt. This crystallization sequence of MIL 03346 is different from those of other nakhlites, including Y‐000593.  相似文献   

4.
Abstract— Crystallization of parent melts for nakhlites was experimentally studied under QFM ± 2 at one bar. Isothermal experiments suggest that melts having parent magma composition for nakhlites crystallize both augites and titanomagnetites at liquidus temperatures of 1144–1154 °C. Compositions of the augites are identical to those of phenocrystic core augites (En36–38Fs22–25Wo39–40) in nakhlites. No olivines crystallize from the isothermal runs, and solidus temperature is about 1000 °C. Linear‐cooling experiments were carried out at various cooling rates (1–17 °C/h) ranging from liquidus to solidus temperatures under similar pressure conditions to the isothermal runs. Augites, titanomagnetites, and fayalites crystallized in the cooling runs, but magnesian olivines never crystallized there. Magnesian core augite in the cooling runs has the same composition as those of nakhlites. Rims of augite crystals from the cooling runs of 1–4 °C/h consist of two layers, ferroan augite inner rim and hedenbergite outer rim, which are very similar to those in the Miller Range (MIL) 03346 nakhlite. Small amounts of pyroxferroite crystallized in mesostasis and augite rims from two cooling runs. Titanomagnetites from cooling runs never accompany ilmenite lamellae as seen in nakhlites, suggesting that the subsolidus cooling rate of the cooling runs was much more rapid than those of nakhlite intercumulus melts. The cooling experiments reproduce the crystallization processes of pyroxenes and the compositional change of residual melt for a rapidly cooled magma such as MIL 03346.  相似文献   

5.
The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.  相似文献   

6.
Here we present the first proof of an impact origin for the Saqqar circular structure in northwestern Saudi Arabia (Neville et al. 2014 ), with an apparent diameter of 34 km, centered at 29°35′N, 38°42′E. The structure is formed in Cambrian–Devonian siliciclastics and is unconformably overlain by undeformed Cretaceous and Paleogene sediments. The age of impact is not well constrained and lies somewhere between 410 and 70 Ma. The subsurface structure is constrained by 2‐D reflection seismic profiles and six drilled wells. First‐order structural features are a central uplift that rises approximately 2 km above regional datums, surrounded by a ring syncline. The crater rim is defined by circumferential normal faults. The central uplift and ring syncline correspond to a Bouguer gravity high and an annular ring‐like low, respectively. The wells were drilled within the central uplift, the deepest among them exceed 2 km depth. Sandstone core samples from these wells show abundant indicators of a shock metamorphic overprint. Planar deformation features (PDFs) were measured with orientations along (0001), {103}, and less frequently along {101} and {104}. Planar fractures (PFs) predominantly occur along (0001) and {101}, and are locally associated with feather features (FFs). In addition, some shocked feldspar grains and strongly deformed mica flakes were found. The recorded shock pressure ranges between 5 and 15 GPa. The preserved level of shock and the absence of an allochthonous crater fill suggest that Saqqar was eroded by 1–2 km between the Devonian and Maastrichtian. The documentation of unequivocal shock features proves the formation of the Saqqar structure by a hypervelocity impact event.  相似文献   

7.
Carbon and nitrogen data from stepped combustion analysis of eight angrites, seven eucrites, and two diogenites, alongside literature data from a further nine eucrites and two diogenites, have been used to assess carbon and nitrogen incorporation and isotope fractionation processes on the angrite parent body (APB), for comparison with volatile behavior on the HED parent body (4 Vesta). A subset of the angrite data has been reported previously (Abernethy et al. 2013 ). Two separate families of volatile components were observed. They were (1) moderately volatile material (MVM), mostly combusting between ~500 and 750 °C and indistinguishable from terrestrial contamination and (2) refractory material (RM), mainly released above 750 °C and thought to be carbon (as ) and nitrogen (as N2 or ) dissolved within the silicate lattice, fitting with the slightly oxidized (~IW to IW+2) angrite fO2 conditions. Isotopic fractionation trends for carbon and nitrogen within the plutonic and basaltic (quenched) angrites suggest that the behavior of the two volatile elements is loosely coupled, but that the fractionation process differs between the two angrite subgroups. Comparison with results from eucrites and diogenites implies similarities between speciation of carbon and nitrogen on 4 Vesta and the APB, with the latter being more enriched in volatiles than the former.  相似文献   

8.
A laboratory study was performed using the Visible Oxford Space Environment Goniometer in which the broadband (350–1250 nm) bidirectional reflectance distribution function (BRDF) of the Winchcombe meteorite was measured, across a range of viewing angles—reflectance: 0°–70°, in steps of 5°; incidence: 15°, 30°, 45°, and 60°; and azimuthal: 0°, 90°, and 180°. The BRDF dataset was fitted using the Hapke BRDF model to (1) provide a method of comparison to other meteorites and asteroids, and (2) to produce Hapke parameter values that can be used to extrapolate the BRDF to all angles. The study deduced the following Hapke parameters for Winchcombe: w = 0.152 ± 0.030, b = 0.633 ± 0.064, and hS = 0.016 ± 0.008, demonstrating that it has a similar w value to Tagish Lake (0.157 ± 0.020) and a similar b value to Orgueil (0.671 ± 0.090). Importantly, the surface profile of the sample was characterized using an Alicona 3D® instrument, allowing two of the free parameters within the Hapke model φ and θ ¯ , which represent porosity and surface roughness, respectively, to be constrained as φ = 0.649 ± 0.023 and θ ¯ = 16.113° (at 500 μm size scale). This work serves as part of the characterization process for Winchcombe and provides a reference photometry dataset for current and future asteroid missions.  相似文献   

9.
Abstract– Petrological and geochemical analyses of Miller Range (MIL) 03346 indicate that this meteorite originated from the same augitic cumulate layer(s) as the nakhlite Martian meteorites, but underwent rapid cooling prior to complete crystallization. As with the other nakhlites, MIL 03346 contains a secondary alteration assemblage, in this case consisting of iddingsite‐like alteration veins in olivine phenocrysts, Fe‐oxide alteration veins associated with the mesostasis, and Ca‐ and K,Fe‐sulfate veins. We compared the textural and mineralogical compositions of MIL 090030, 090032, and 090136 with MIL 03346, focusing on the composition and Raman spectra of the alteration assemblages. These observations indicate that the meteorites are paired, and that the preterrestrial olivine‐bound alteration assemblages were produced by weakly acidic brine. Although these alteration assemblages resemble similar assemblages in Nakhla, the absence of siderite and halite in the Miller Range nakhlites indicates that the parental alteration brine was comparatively HCO3? depleted, and less concentrated, than that which altered Nakhla. This indicates that the Miller Range nakhlite alteration brine experienced a separate evolutionary pathway to that which altered Nakhla, and therefore represents a separate branch of the Lafayette‐Nakhla evaporation sequence. Thin‐sections cut from the internal portions of these meteorites (away from any fusion crust or terrestrially exposed edge), contain little Ca‐sulfate (identified as gypsum), and no jarosite, whereas thin‐sections with terrestrially exposed edges have much higher sulfate abundances. These observations suggest that at least the majority of sulfate within the Miller Range nakhlites is terrestrially derived.  相似文献   

10.
Caleta el Cobre (CeC) 022 is a Martian meteorite of the nakhlite group, showing an unbrecciated cumulate texture, composed mainly of clinopyroxene and olivine. Augite shows irregular core zoning, euhedral rims, and thin overgrowths enriched in Fe relative to the core. Low‐Ca pyroxene is found adjacent to olivine. Phenocrysts of Fe‐Ti oxides are titanomagnetite with exsolutions of ilmenite/ulvöspinel. Intercumulus material consists of both coarse plagioclase and fine‐grained mesostasis, comprising K‐feldspars, pyroxene, apatite, ilmenite, Fe‐Ti oxides, and silica. CeC 022 shows a high proportion of Martian aqueous alteration products (iddingsite) in olivine (45.1 vol% of olivine) and mesostasis. This meteorite is the youngest nakhlite with a distinct Sm/Nd crystallization age of 1.215 ± 0.067 Ga. Its ejection age of 11.8 ± 1.8 Ma is similar to other nakhlites. CeC 022 reveals contrasted cooling rates with similarities with faster cooled nakhlites, such as Northwest Africa (NWA) 817, NWA 5790, or Miller Range 03346 nakhlites: augite irregular cores, Fe‐rich overgrowths, fine‐grained K‐feldspars, quenched oxides, and high rare earth element content. CeC 022 also shares similarities with slower cooled nakhlites, including Nakhla and NWA 10153: pyroxene modal abundance, pyroxenes crystal size distribution, average pyroxene size, phenocryst mineral compositions, unzoned olivine, and abundant coarse plagioclase. Moreover, CeC 022 is the most magnetic nakhlite and represents an analog source lithology for the strong magnetization of the Martian crust. With its particular features, CeC 022 must originate from a previously unsampled sill or flow in the same volcanic system as the other nakhlites, increasing Martian sample diversity and our knowledge of nakhlites.  相似文献   

11.
We present a geochemical study of recently discovered Martian meteorite Northwest Africa (NWA) 5790 and use our results to constrain its origin and relationship with the other nakhlites. This nakhlite is a clinopyroxene cumulate composed of phenocrysts of augite, olivine, and rare oxides surrounded by a mesostasis composed of vitrophyric glass, feldspars, oxides, phosphates, and fine‐grained olivines and augite. Petrography, and major and trace element compositions of the phases present are consistent with derivation of NWA 5790 from a parental magma common to all the nakhlites. Olivine cores grew from a distinct, incompatible‐element enriched magma and are surrounded by rims containing augite inclusions that grew from the nakhlite parental liquid, supporting previous arguments for xenocrystic olivine cores in nakhlites. Rare earth element microdistributions suggest derivation of NWA 5790 augites from an evolved, relatively oxidized magma, produced by augite fractionation from the common nakhlite parental liquid. Augite grain shapes and CSD patterns are consistent with rapid cooling and derivation near the top of the nakhlite cumulate pile, but patterns are distinct from other nakhlites thought to have formed near the stratigraphic top. The high mesostasis abundance (~44 vol%) indicates solidification near the top of the nakhlite pile close to locations suggested for nakhlites NWA 817 and Miller Range (MIL) 03346. However, the geochemical and petrographic characteristics of these three samples do not permit their placement in a simple stratigraphic order as would occur in a single lava flow. This lack of simple ordering suggests that the nakhlite lava flow split into multiple sections as would occur during breakouts from a single lava flow. Finally we note that NWA 5790 is unique among currently available nakhlites in having phenocryst abundances low enough to allow it to flow.  相似文献   

12.
Abstract— Pyroxene structural data, along with analyses of titanomagnetite, fayalite and mesostasis of the new nakhlite Miller Range (MIL) 03346, define equilibration near 1 bar, 1100 °C, and oxygen fugacity near the FMQ buffer. There is a clear progression of oxygen fugacity (fO2) in Martian meteorites from reduced Allan Hills (ALH) 84001 to intermediate shergottites to oxidized nakhlites. This trend can be explained by polybaric graphite‐CO‐CO2 equilibria in the Martian mantle. Shergottites would have formed at pressures between 1.2 and 3.0 GPa, and nakhlite parent liquids formed at pressures >3.0 GPa, consistent with geochemical and petrologic data for the shergottites and nahklites. Carbon buffering in the Martian mantle could be responsible for variation in fO2 in Martian meteorites (rather than assimilation or crustal interaction), as well as C‐H‐O fluids that could be the source of ˜30 ppb CH4 detected by recent spacecraft missions. The conundrum of an oxidized current mantle and basalts, but reduced early mantle during core‐mantle equilibrium exists for both the Earth and Mars. A polybaric buffering role for graphite can explain this discrepancy for Mars, and thus it may not be necessary to have an oxidation mechanism like the dissociation of MgFe‐perovskite to account for the oxidized terrestrial mantle.  相似文献   

13.
Core samples from the Chicxulub impact structure provide insights into the formation processes of a shallow-marine-target, complex crater. Although previous studies investigated the impactites (generally suevitic and polymict breccias) of the Yaxcopoil-1 (YAX-1) drill core in the Chicxulub impact structure, the interpretation of its deposition remains controversial. Here, we analyze planar deformation features (PDFs), grain size, and abundance of shocked quartz throughout the YAX-1 impactite sequence (794–895 m in depth). PDF orientations of most quartz grains in YAX-1 impactites show a distribution of both low angles ({104}, {103}, {102}) and high angles (orientations higher than 55° to c-axis), while the lower part of the impactite sequence contains quartz showing only PDF orientations of low angles. High-abundance, coarse-grained shocked quartz is found from the lower to middle parts of the impactites, whereas it abruptly changes to low-abundance, fine-grained shocked quartz within the upper part. In the uppermost part of the impactites, repeated oscillations in contents of these two components are observed. PDF orientation pattern suggests most of the shocked quartz grains experienced a range of shock pressure, except two samples in the lower part of impactites, which experienced only a high level of shock. We suggest that the base and lower part of the impactite sequence were formed by ejecta curtain and melt surge deposits, respectively. Our results are also consistent with the interpretation that the middle part of the impactite sequence is fallback ejecta from the impact plume. Additionally, we support the contention that massive seawater resurges into the crater occurred during the deposition of the upper and uppermost part of the impactites.  相似文献   

14.
Chondrules probably formed during a small window of time ~1–4 Ma after CAIs, when most solid matter in the asteroid belt was already in the form of km-sized planetesimals. They are unlikely, therefore, to be “building blocks” of planets or abundant on asteroids, but more likely to be a product of energetic events common in the asteroid belt at that epoch. Laboratory experiments indicate that they could have formed when solids of primitive composition were heated to temperatures of ~1600 K and then cooled for minutes to hours. A plausible heat source for this is magma, which is likely to have been abundant in the asteroid belt at that time, and only that time, due to the trapping of 26Al decay energy in planetesimal interiors. Here, we propose that chondrules formed during low-speed ( ≲ 1 km s − 1 ) collisions between large planetesimals when heat from their interiors was released into a stream of primitive debris from their surfaces. Heating would have been essentially instantaneous and cooling would have been on the dynamical time scale, 1 / Gρ ~30 min, where ρ is the mean density of a planetesimal. Many of the heated fragments would have remained gravitationally bound to the merged object and could have suffered additional heating events as they orbited and ultimately accreted to its surface. This is a hybrid of the splash and flyby models: We propose that it was the energy released from a body's molten interior, not its mass, that was responsible for chondrule formation by heating primitive debris that emerged from the collision.  相似文献   

15.
The weathering products present in igneous terrestrial Antarctic samples were analyzed, and compared with those found in the four Miller Range nakhlite Martian meteorites. The aim of these comparisons was to determine which of the alteration phases in the Miller Range nakhlites are produced by terrestrial weathering, and what effect rock composition has on these phases. Antarctic terrestrial samples MIL 05031 and EET 96400, along with the Miller Range nakhlites MIL 03346 and 090032, were found to contain secondary alteration assemblages at their externally exposed surfaces. Despite the difference in primary mineralogy, the assemblages of these rocks consist mostly of sulfates (jarosite in MIL 05031, jarosite and gypsum in EET 96400) and iddingsite‐like Fe‐clay. As neither of the terrestrial samples contains sulfur‐bearing primary minerals, and these minerals are rare in the Miller Range nakhlites, it appears that SO42?, possibly along with some of the Na+, K+, and Ca+ in these phases, was sourced from wind‐blown sea spray and biogenic emissions from the southern ocean. Cl enrichment in the terrestrially derived “iddingsite” of MIL 05031 and MIL 03346, and the presence of halite at the exterior edge of MIL 090032, can also be explained by this process. However, jarosite within and around the olivine‐bound melt inclusions of MIL 090136 is present in the interior of the meteorite and, therefore, is probably the product of preterrestrial weathering on Mars.  相似文献   

16.
Abstract— Experimentally rehomogenized melt inclusions from the nakhlite Miller Range 03346 (MIL 03346) and the lherzolitic shergottite Allan Hills 77005 (ALH 77005) have been analyzed for their rare earth element (REE) concentrations in order to characterize the early melt compositions of these Martian meteorites and to calculate the oxygen fugacity conditions they crystallized under. D(Eu/Sm)pyroxene/melt values were measured at 0.77 and 1.05 for ALH 77005 and MIL 03346, respectively. These melts and their associated whole rock compositions have similar REE patterns, suggesting that whole rock REE values are representative of those of the early melts and can be used as input into the pyroxene Eu‐oxybarometer for the nakhlites and lherzolitic shergottites. Crystallization fO2 values of IW + 1.1 (ALH 77005) and IW + 3.2 (MIL 03346) were calculated. Whole rock data from other nakhlites and lherzolitic shergottites was input into the Eu‐oxybarometer to determine their crystallization fO2 values. The lherzolitic shergottites and nakhlites have fO2 values that range from IW + 0.4 to 1.6 and from IW + 1.1 to 3.2, respectively. These values are consistent with some previously determined fO2 estimates and expand the known range of fO2 values of the Martian interior to four orders of magnitude. The origins of this range are not well constrained. Possible mechanisms for producing this spread in fO2 values include mineral/melt fractionation, assimilation, shock effects, and magma ocean crystallization processes. Mineral/melt partitioning can result in changes in fO2 from the start to the finish of crystallization of 2 orders of magnitude. In addition, crystallization of a Martian magma ocean with reasonable initial water content results in oxidized, water‐rich, late‐stage cumulates. Sampling of these oxidized cumulates or interactions between reduced melts and the oxidized material can potentially account for the range of fO2 values observed in the Martian meteorites.  相似文献   

17.
Magnesium and silicon isotopic profiles across melilite grains in two type B1 and two type B2 calcium‐aluminum‐rich inclusions (CAIs) reveal differing but constant enrichments in heavy isotopes everywhere except ≤1000 μm from the CAI margins. There is no close correlation in the B1s or the B2s between isotopic composition and åkermanite content of the melilite, a measure of progressive igneous crystallization, yet such a correlation might be expected in a type B2: without a melilite mantle (as in B1s) to seal the interior off and prevent further evaporation, the melt would have maintained communication with the external gas. These observations indicate a model in which B1s and B2s solidified under differing conditions. The B2s solidified under lower hydrogen pressures ( ≤ 10?4 – 10?5 bars) than did B1s ( > 10?4 bars), so surface volatilization was slower in the B2s and internal chemical and isotopic equilibrium was maintained over the interval of melilite crystallization. The outermost zones of the CAIs (≤1000 μm from the edge) are not consistently enriched in heavy isotopes relative to the interiors, as might be expected from diffusion‐limited surface evaporation of the melt. In all cases, the magnesium in the CAI margins is lighter than in the interiors. In one case, silicon in the margin also is lighter, but locally in some CAIs, it is isotopically heavier near the surface. If melt evaporation played a role in the formation of these outer zones, a later event in many cases caused isotopic re‐equilibration with an external and isotopically near‐normal reservoir.  相似文献   

18.
Planar deformation features (PDFs) in quartz are the most important diagnostic features that allow the unambiguous identification of impact structures on Earth. In order to confirm that these features (that are characterized by planar character and form along specific crystallographic planes) are indeed PDFs, they need to be properly investigated and indexed. Following universal‐stage measurements, the process of indexing is usually performed manually, using a Wulff stereonet and following a strict procedure, which is time consuming and error prone. In this article, we present WIP, a new Web‐based program for indexing planar deformation features in quartz. The correctness of our program is shown by its application to measurements that had previously been indexed manually. The observed minor differences, especially in the absolute frequency percentage of PDFs, are negligible and not significant enough to influence the estimation of shock pressure that could be calculated from the indexed results. Usability of this program is shown using the spatial relationships between a statistically significant number of 278 quartz grains with 409 sets of PDFs analyzed within the area (~35 mm2) of a single thin section of a meta‐greywacke from the Bosumtwi impact structure. Our program is not only more accurate and faster than the manual (graphical) method but also removes the human error from the plotting process and allows control of several parameters, such as the value of estimated measurement error used in the indexing calculation or method of aggregated error handling. The program also provides information about the angles between the planes of the measured PDF sets present in a grain, which allows determination of the angles between (for example) indexed {} and {} sets.  相似文献   

19.
The Twannberg iron meteorite is one out of only six members of the group IIG. The combined noble gas and radionuclide data obtained in this new systematic study indicate that Twannberg with its ~570 recently recovered specimens was a large object with a preatmospheric radius in the range of ~2 m, which corresponds to ~250 × 103 kg. The cosmic‐ray exposure age for Twannberg is 182 ± 45 Ma. The most surprising result is the long terrestrial age of Tterr =  ka, which is unexpected considering the humid conditions in Switzerland. However, this age is in accord with glaciation events, indicating that the less shielded samples from Mt. Sujet were found close to the position of the original strewn field, whereas the samples from Gruebmatt and Twannbach, which are from more shielded positions, were glacially transported to the east–northeast during the second last ice age (185–130 ka ago) from an original position west of Mt. Sujet.  相似文献   

20.
The Summanen structure is located in Central Finland and is one of Finland's 12 known meteorite impact structures. In 2017, the discovery of Summanen was based on numerous shatter cone boulders with planar deformation features (PDFs) and a circular electromagnetic anomaly, which is 2.6 km in diameter. The site was revisited in 2020 and 2022, and shatter cone-bearing outcrops were discovered. PDFs and feather features were identified in samples from these outcrops. A total of 38 PDF sets in 27 quartz grains resulted in rational crystallographic orientations concentrating on {10 1 ¯ 4}, {10 1 ¯ 3}, {10 1 ¯ 2}, and {11 2 ¯ 2}, implying shock pressures of 2–20 GPa. Gravity measurements were taken, and the electrical conductivity of the structure was studied. The gravimetric results revealed a circular negative anomaly of about 4 km in diameter, with an amplitude of −3.5 mGal. Excluding the gravitational effect of water and Quaternary sediments reduces the anomaly to −1.6 mGal. A bowl-shaped conductive layer, likely containing relict saline water in the impact-fractured bedrock, was identified to a depth of 240 m. Topographic and bathymetric data were combined to determine the impact's effect and interpret the level of erosion. Cobbles of sedimentary sand- and siltstones were found on the coastline of Lake Summanen. Based on their similarity to those found in the Söderfjärden impact crater with a Cambrian age, it is likely that these rocks and post-impact infill are also of a similar age.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号