首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 315 毫秒
1.
 Iron tracer diffusion experiments in diopside have been performed using natural and synthetic single crystals of diopside, and stable iron tracers enriched in 54Fe, at temperatures in the range 950–1100 °C, total pressure 1 atm, for times up to 29 days. Iron isotope diffusion profiles were determined with an ion microprobe. For experiments performed at log pO2 = −13, in directions parallel to the c axis and the b axis of two natural, low iron (Fe ∼ 1.8 at %) diopsides, the data obey a single Arrhenius relationship of the form D = 6.22−5.9 +49.6×10−15 exp(−161.5 ± 35.0 kJ mol−1/RT) m2 s−1. A single datum for iron diffusion in iron-free, single-crystal diopside at 1050 °C, is approximately 1 order of magnitude slower than in the natural crystals. The pO2 dependence of iron diffusion in natural crystals at 1050 °C (power exponent = 0.229 ± 0.036) indicates a vacancy mechanism; this is consistent with the results of unpublished atomistic simulation studies. There is no evidence of anisotropy for iron diffusion in diopside. Received: 16 March 1999 / Accepted: 10 April 2000  相似文献   

2.
The breakdown of potassium feldspar at high water pressures   总被引：1，自引：0，他引：1  
The equilibrium position of the reaction between sanidine and water to form “sanidine hydrate” has been determined by reversal experiments on well characterised synthetic starting materials in a piston cylinder apparatus. The reaction was found to lie between four reversed brackets of 2.35 and 2.50 GPa at 450 °C, 2.40 and 2.59 GPa at 550 °C, 2.67 and 2.74 GPa at 650 °C, and 2.70 and 2.72 GPa at 680 °C. Infrared spectroscopy showed that the dominant water species in sanidine hydrate was structural H2O. The minimum quantity of this structural H2O, measured by thermogravimetric analysis, varied between 4.42 and 5.85 wt% over the pressure range of 2.7 to 3.2 GPa and the temperature range of 450 to 680 °C. Systematic variation in water content with pressure and temperature was not clearly established. The maximum value was below 6.07 wt%, the equivalent of 1 molecule of H2O per formula unit. The water could be removed entirely by heating at atmospheric pressure to produce a metastable, anhydrous, hexagonal KAlSi3O8 phase (“hexasanidine”) implying that the structural H2O content of sanidine hydrate can vary. The unit cell parameters for sanidine hydrate, measured by powder X-ray diffraction, were a = 0.53366 (±0.00022) nm and c = 0.77141 (±0.00052) nm, and those for hexasanidine were a = 0.52893 (±0.00016) nm and c = 0.78185 (±0.00036) nm. The behaviour and properties of sanidine hydrate appear to be analogous to those of the hydrate phase cymrite in the equivalent barium system. The occurrence of sanidine hydrate in the Earth would be limited to high pressure but very low temperature conditions and hence it could be a potential reservoir for water in cold subduction zones. However, sanidine hydrate would probably be constrained to granitic rock compositions at these pressures and temperatures. Received: 6 May 1997 / Accepted: 2 October 1997  相似文献   

3.
Pb diffusion in rutile   总被引：16，自引：0，他引：16  
Diffusion of Pb was measured in natural and synthetic rutile under dry, 1 atmosphere conditions, using mixtures of Pb titanate or Pb sulfide and TiO2 as the sources of diffusant. Pb depth profiles were then measured with Rutherford Backscattering Spectrometry (RBS). Over the temperature range 700–1100 °C, the following Arrhenius relation was obtained for the synthetic rutile: D=3.9 × 10−10exp(−250 ± 12 kJ mol−1/RT) m2s−1. Results for diffusion in natural and synthetic rutile were quite similar, despite significant differences in trace element compositions. Mean closure temperatures calculated from the diffusion parameters are around 600 °C for rutile grains of ∼100 μm size. This is about 100 °C higher than rutile closure temperature determinations from past field-based studies, suggesting that rutile is more resistant to Pb loss through volume diffusion than previously thought. Received: 28 June 1999 / Accepted: 29 December 1999  相似文献   

4.
Magnesium self-diffusion coefficients were determined experimentally for diffusion parallel to each of the three crystallographic directions in natural orthoenstatite (En88Fs12). Experiments were conducted at 1 atm in CO-CO2 gas mixing furnaces, which provided oxygen fugacities equivalent to the iron-wüstite buffer. Diffusion of 25Mg was induced in polished samples of oriented orthoenstatite using a film of isotopically enriched 25MgO as the source material. Very short (<0.15 μm) diffusional penetration profiles were measured by ion microprobe depth profiling. The diffusion coefficients determined for four temperatures (900, 850, 800, 750 °C) provide the activation energies, E a , and frequency factors, D o, where D = D o exp (−E a /RT) for Mg self-diffusion parallel to each crystallographic direction: a-axis, E a  = 360 ± 52 kJ/mole and D o = 1.10 × 10−4 m2/s; b-axis, E a  = 339 ± 77 kJ/mole and D o = 6.93 × 10−6 m2/s and c-axis, E a  = 265 ± 66 kJ/mole and D o = 4.34 × 10−9 m2/s. In this temperature range, any possible anisotropy of cation diffusion is very small, however the activation energy for diffusion parallel to the c-axis (001) is the lowest and the activation energies for diffusion parallel to the a-axis (100) and b-axis (010) are higher. Application of these diffusion results to the silicate phases of the Lowicz mesosiderite meteorite provides cooling rates for the silicate portion of the meteorite (4–11 °C/100 years) that are similar, although slower, to previous estimates. These silicate cooling rates are still several orders of magnitude faster than the cooling rates (0.1 °C/106 years) for the metal portions. Received: 22 January 1997 / Accepted: 2 October 1997  相似文献   

5.
The oxygen and hydrogen isotope compositions of minerals and whole rock were determined for two types of gneiss (biotite gneiss and granitic gneiss) associated with ultrahigh pressure (UHP) eclogites in the Shuanghe district of the eastern Dabie Mountains. There are significant differences in δ18O between the two gneisses: the UHP biotite gneiss varying from −4.3‰ to 10.6‰ similar to the associated eclogites, whereas the non-UHP granitic gneiss ranges only from −3.8‰ to 1.2‰. The δD values are similar in the two gneisses with −37 to −64‰ for epidote/zoisite, −92 to −83‰ for amphibole, and −63 to −109‰ for biotite/phengite. Hydrogen isotope disequilibrium among the coexisting hydroxyl-bearing minerals is ascribed to retrograde exchange subsequent to amphibolite-facies metamorphism. Oxygen isotopic equilibrium has been preserved among various minerals in both gneisses regardless of the large variation in rock δ18O. Oxygen isotopic geothermometers yield different but regular temperatures corresponding to the closure temperatures of oxygen diffusion in the minerals. The metamorphic temperatures of both eclogite facies and amphibolite facies have been recovered in mineral pairs from the biotite gneiss. The isotopic temperatures for the granitic gneiss are mostly in accordance with amphibolite-facies metamorphism. However, high temperatures of 550 to 650 °C are obtained from those minerals resistant to retrograde oxygen isotope exchange, implying that the granitic gneiss may have experienced higher temperature metamorphism than expected from petrologic thermometers. The 18O-depletion of both gneisses is interpreted to result from meteoric-hydrothermal exchange before/during plate subduction. Therefore, the measured δ18O values of the gneisses reflect the oxygen isotope compositions of their protoliths prior to the UHP metamorphism. It is inferred that the UHP unit is in foreign contact with the non-UHP unit like a tectonic melange, but both of them experienced the two common stages of geodynamic evolution: (1) 18O-depletion prior to the UHP metamorphism, (2) uplifting since the amphibolite-facies metamorphism. Received: 5 May 1998 / Accepted: 27 August 1998  相似文献   

6.
Diffusion of tetravalent cations in zircon   总被引：18，自引：1，他引：18  
Diffusion rates for the three tetravalent cations U, Th and Hf have been measured in synthetic zircon. Diffusant sources included oxide powders and ground pre-synthesized silicates. Rutherford backscattering spectrometry (RBS) was used to measure depth profiles. Over the temperature range 1400–1650 °C, the following Arrhenius relations were obtained (diffusion coefficients in m2sec−1): log D Th = (1.936 ± 0.9820) + (− 792 ± 34 kJ mol−1 /2.303 RT) log D U = (0.212 ± 2.440) + (− 726 ± 83 kJ mol−1 /2.303 RT) log D Hf = (3.206 ± 1.592) + (− 812 ± 54 kJ mol−1 /2.303 RT) The data show a systematic increase in diffusivity with decreasing ionic radius (i.e., faster diffusion rates for Hf than for U or Th), a trend also observed in our earlier study of rare earth diffusion in zircon. Diffusive fractionation may be a factor in the Lu-Hf system given the much slower diffusion rates of tetravalent cations when compared with the trivalent rare earths. The very slow diffusion rates measured for these tetravalent cations suggest that they are essentially immobile under most geologic conditions, permitting the preservation of fine-scale chemical zoning and isotopic signatures of inherited cores. Received: 12 July 1996 / Accepted: 2 December 1996  相似文献   

7.
 Unit-cell dimensions of a natural phlogopite from Pargas, Finland, have been determined in the temperature interval of 27–1050 °C by X-ray powder diffraction technique. Expansion rates vary discontinuously with temperature with a break at 412 °C. Below this temperature, the linear expansions (α) for a, b and c axis lengths are 3.74 × 10−5 K−1, 1.09 × 10−5 K−1, and 1.19 × 10−5 K−1, respectively, and above that they are 0.86 × 10−5 K−1, 0.80 × 10−5 K−1, and 1.93 × 10−5 K−1. The volume thermal expansion coefficients are 6.26 × 10−5 K−1 and 3.71 × 10−5 K−1 for low-temperature and high-temperature intervals, respectively. The observed kink in the rate of thermal expansions with temperature could be due to the different mode of structural changes. Thermogravimetric analysis of the sample indicates the oxidation of iron in the temperature range of 500–600 °C and dehydroxylation as well as decomposition of phlogopite in the temperature range of 900–1200 °C. Received: 8 September 1998 / Accepted: 28 February 2000  相似文献   

8.
Self-diffusion of Si under anhydrous conditions at 1 atm has been measured in natural zircon. The source of diffusant for experiments was a mixture of ZrO2 and 30Si-enriched SiO2 in 1:1 molar proportions; experiments were run in crimped Pt capsules in 1-atm furnaces. 30Si profiles were measured with both Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis with the resonant nuclear reaction 30Si(p,γ)31P. For Si diffusion normal to c over the temperature range 1,350–1,550°C, we obtain an Arrhenius relation D = 5.8 exp(−702 ± 54 kJ mol−1/RT) m2 s−1 for the NRA measurements, which agrees within uncertainty with an Arrhenius relation determined from the RBS measurements [62 exp(−738 ± 61 kJ mol−1/RT) m2 s−1]. Diffusion of Si parallel to c appears slightly faster, but agrees within experimental uncertainty at most temperatures with diffusivities for Si normal to c. Diffusion of Si in zircon is similar to that of Ti, but about an order of magnitude faster than diffusion of Hf and two orders of magnitude faster than diffusion of U and Th. Si diffusion is, however, many orders of magnitude slower than oxygen diffusion under both dry and hydrothermal conditions, with the difference increasing with decreasing temperature because of the larger activation energy for Si diffusion. If we consider Hf as a proxy for Zr, given its similar charge and size, we can rank the diffusivities of the major constituents in zircon as follows: D Zr < D Si << D O, dry < D O, ‘wet’.  相似文献   

9.
 Grain boundary diffusion rates of oxygen, potassium and calcium in fine-grained feldspar aggregates were determined experimentally. The starting materials were a natural albite rock from the Tanco pegmatite and aggregates hot-pressed from fragments of Amelia albite or Ab, Or and An composition glasses. The technique employed isotopic tracers (18O, 41K, 42Ca) either evaporated onto the surface or in an aqueous solution surrounding the sample, and depth profiling using an ion microprobe (SIMS). From the depth profiles, the product of the grain boundary diffusion coefficient (D′) and effective boundary width (δ) was calculated using numerical solutions to the appropriate diffusion equation. The experimental reproducibility of D′δ is a factor of 3. A separate determination of D′ independent of δ yields an effective grain boundary width of ∼3 nm, consistent with high resolution TEM observations of a physical grain boundary width <5 nm. Oxygen (as molecular water) grain boundary diffusion rates were determined in the Ab and Or aggregates at 450°–800° C and 100 MPa (hydrothermal), potassium rates in Or aggregates at 450°–700° C both at 0.1 MPa (in air) and at 100 MPa (hydrothermal), and calcium rates in An aggregates at 700°–1100° C and 0.1 MPa (in air). Oxygen grain boundary diffusion rates are similar in all three of the Ab aggregates and in the Or aggregate. Potassium and oxygen depth profiles measured in the same samples yield different D′δ values, confirming a diffusional transport mechanism. Potassium diffusion in the Or aggregate has a greater activation energy (216 vs 78 kJ/mol) than oxygen, and the Arrhenius relations cross at ∼625° C. Potassium D′δ values in Or aggregates are about a factor of five greater in hydrothermal experiments at 100 MPa than in experiments at 0.1 MPa in air. Calcium grain boundary diffusion rates in An aggregates are 4 to 5 orders of magnitude slower than potassium in Or and have a greater (291 kJ/mol) activation energy. This suggests that differences in formal charge and/or size of diffusing species may play an important role in their relative grain boundary diffusion rates. Received: 24 December 1993 / Accepted: 16 June 1994  相似文献   

10.
 Calorimetric and P–V–T data for the high-pressure phase Mg5Al5Si6O21(OH)7 (Mg-sursassite) have been obtained. The enthalpy of drop solution of three different samples was measured by high-temperature oxide melt calorimetry in two laboratories (UC Davis, California, and Ruhr University Bochum, Germany) using lead borate (2PbO·B2O3) at T=700 ∘C as solvent. The resulting values were used to calculate the enthalpy of formation from different thermodynamic datasets; they range from −221.1 to −259.4 kJ mol−1 (formation from the oxides) respectively −13892.2 to −13927.9 kJ mol−1 (formation from the elements). The heat capacity of Mg5Al5Si6O21(OH)7 has been measured from T=50 ∘C to T=500 ∘C by differential scanning calorimetry in step-scanning mode. A Berman and Brown (1985)-type four-term equation represents the heat capacity over the entire temperature range to within the experimental uncertainty: C P (Mg-sursassite) =(1571.104 −10560.89×T −0.5−26217890.0 ×T −2+1798861000.0×T −3) J K−1 mol−1 (T in K). The P V T behaviour of Mg-sursassite has been determined under high pressures and high temperatures up to 8 GPa and 800 ∘C using a MAX 80 cubic anvil high-pressure apparatus. The samples were mixed with Vaseline to ensure hydrostatic pressure-transmitting conditions, NaCl served as an internal standard for pressure calibration. By fitting a Birch-Murnaghan EOS to the data, the bulk modulus was determined as 116.0±1.3 GPa, (K ′=4), V T,0 =446.49 3 exp[∫(0.33±0.05) × 10−4 + (0.65±0.85)×10−8 T dT], (K T/T) P  = −0.011± 0.004 GPa K−1. The thermodynamic data obtained for Mg-sursassite are consistent with phase equilibrium data reported recently (Fockenberg 1998); the best agreement was obtained with Δf H 0 298 (Mg-sursassite) = −13901.33 kJ mol−1, and S 0 298 (Mg-sursassite) = 614.61 J K−1 mol−1. Received: 21 September 2000 / Accepted: 26 February 2001  相似文献   

11.
We measured seasonal variations in microzooplankton grazing in Long Island Sound (LIS) and San Francisco Bay (SFB). There was consistent evidence of nutrient limitation in LIS, but not SFB. We found higher chlorophyll a concentrations in LIS compared with SFB. In spite of differences in phytoplankton, there were no differences in microzooplankton abundance (summer: LIS, 12.4 ± 1.8 × 103 indiv. L−1; SFB, 14.1 ± 3.0 × 103 indiv. L−1), biomass (summer: LIS, 30.4 ± 5.0 μg C L−1; SFB, 26.3 ± 5.9 μg C L−1), or grazing rates (summer: LIS, 0.66 ± 0.19 day−1; SFB, 0.65 ± 0.18 day−1) between the two estuaries. In common with many other investigators, we found many instances of saturated as well as insignificant grazing. We suggest that saturation in some cases may result from high particle loads in turbid estuarine systems and that insignificant grazing may result from extreme saturation of the grazing response due to the need to process non-food particles.  相似文献   

12.
Geochemical mixing models were used to decipher the dominant source of freshwater (rainfall, canal discharge, or groundwater discharge) to Biscayne Bay, an estuary in south Florida. Discrete samples of precipitation, canal water, groundwater, and bay surface water were collected monthly for 2 years and analyzed for salinity, stable isotopes of oxygen and hydrogen, and Sr2+/Ca2+ concentrations. These geochemical tracers were used in three separate mixing models and then combined to trace the magnitude and timing of the freshwater inputs to the estuary. Fresh groundwater had an isotopic signature (δ 18O = −2.66‰, δD −7.60‰) similar to rainfall (δ 18O = −2.86‰, δD = −4.78‰). Canal water had a heavy isotopic signature (δ 18O = −0.46‰, δD = −2.48‰) due to evaporation. This made it possible to use stable isotopes of oxygen and hydrogen to separate canal water from precipitation and groundwater as a source of freshwater into the bay. A second model using Sr2+/Ca2+ ratios was developed to discern fresh groundwater inputs from precipitation inputs. Groundwater had a Sr2+/Ca2+ ratio of 0.07, while precipitation had a dissimilar ratio of 0.89. When combined, these models showed a freshwater input ratio of canal/precipitation/groundwater of 37%:53%:10% in the wet season and 40%:55%:5% in the dry season with an error of ±25%. For a bay-wide water budget that includes saltwater and freshwater mixing, fresh groundwater accounts for 1–2% of the total fresh and saline water input.  相似文献   

13.
 Diffusion rates for sulfur in rhyolite melt have been measured at temperatures of 800–1100° C, water contents of 0–7.3 wt%, and oxygen fugacities from the quartz-fayalite-magnetite buffer to air. Experiments involved dissolution of anhydrite or pyrrhotite into rhyolite melt over time scales of hours to days. Electron microprobe analysis was used to measure sulfur concentration profiles in the quenched glasses. Regression of the diffusion data in dry rhyolite melt gives Dsulfur=0.05·exp{−221±80RT}, which is one to two orders of magnitude slower than diffusion of other common magmatic volatiles such as H2O, CO2 and Cl-. Diffusion of sulfur in melt with 7 wt% dissolved water is 1.5 to 2 orders of magnitude faster than diffusion in the anhydrous melt, depending on temperature. Sulfur is known to dissolve in silicate melts as at least two different species, S2− and S6+, the proportions of which vary with oxygen fugacity; despite this, oxygen fugacity does not appear to affect sulfur diffusivity except under extremely oxidizing conditions. This result suggests that diffusion of sulfur is controlled by one species over a large range in oxygen fugacity. The most likely candidate for the diffusing species is the sulfide ion, S2−. Re-equilibration between S2− and S6+ in oxidized melts must generally be slow compared to S2− diffusion in order to explain the observed results. In a silicic melt undergoing degassing, sulfur will tend to be fractionated from other volatile species which diffuse more rapidly. This is consistent with analyses of tephra from the 1991 eruption of Mount Pinatubo, Philippines, and from other high-silica volcanic eruptions. Received: 26 April 1995 / Accepted: 1 November 1995  相似文献   

14.
 The lattice constants of paragonite-2M1, NaAl2(AlSi3)O10(OH)2, were determined to 800 °C by the single-crystal diffraction method. Mean thermal expansion coefficients, in the range 25–600 °C, were: αa = 1.51(8) × 10−5, αb = 1.94(6) × 10−5, αc = 2.15(7) ×  10−5 °C−1, and αV = 5.9(2) × 10−5 °C−1. At T higher than 600 °C, cell parameters showed a change in expansion rate due to a dehydroxylation process. The structural refinements of natural paragonite, carried out at 25, 210, 450 and 600 °C, before dehydroxylation, showed that the larger thermal expansion along the c parameter was mainly due to interlayer thickness dilatation. In the 25–600 °C range, Si,Al tetrahedra remained quite unchanged, whereas the other polyhedra expanded linearly with expansion rate proportional to their volume. The polyhedron around the interlayer cation Na became more regular with temperature. Tetrahedral rotation angle α changed from 16.2 to 12.9°. The structure of the new phase, nominally NaAl2 (AlSi3)O11, obtained as a consequence of dehydroxylation, had a cell volume 4.2% larger than that of paragonite. It was refined at room temperature and its expansion coefficients determined in the range 25–800 °C. The most significant structural difference from paragonite was the presence of Al in fivefold coordination, according to a distorted trigonal bipyramid. Results confirm the structural effects of the dehydration mechanism of micas and dioctahedral 2:1 layer silicates. By combining thermal expansion and compressibility data, the following approximate equation of state in the PTV space was obtained for paragonite: V/V 0 = 1 + 5.9(2) × 10−5 T(°C) − 0.00153(4) P(kbar). Received: 12 July 1999 / Revised, accepted: 7 December 1999  相似文献   

15.
 The partitioning of Fe and Mg between the M1 and M2 octahedral sites of olivine has been investigated by in situ time-of-flight neutron powder diffraction. The degree of M-cation order was determined from direct measurements of site occupancies in a synthetic sample of Fo50Fa50 heated to 1250 °C at the Fe-FeO oxygen buffer. Fe shows slight preference for M1 at temperatures below about 600 °C, progressively disordering on heating to this temperature. Above 630 °C, the temperature at which site preferences cross over (T cr), Fe preferentially occupies M2, becoming progressively more ordered into M2 on increasing temperature. The cation-ordering behaviour is discussed in relation to the temperature dependence of the M1 and M2 site geometries, and it is suggested that vibrational entropy, crystal field effects and changes in bond characteristics play a part in the cross-over of partitioning behaviour. The temperature dependence of site ordering is modelled using a Landau expansion of the free energy of ordering of the type ΔG = −hQ + gTQ +  (T − T c)Q 2 +  Q 4, with a/h = 0.00406 K−1, b/h = 2.3, T c = 572 K and g/h = 0.00106 K−1. These results suggest that the high-temperature ordering behaviour across the forsterite-fayalite join will have a bearing on the activity-composition relations of this important rock-forming mineral, and indicate that Fe-Mg olivine solid solutions become less ideal as temperature increases. Received: 12 August 1999 / Accepted: 25 April 2000  相似文献   

16.
Cation diffusion rates at 690 ± 30 °C have been calculated by inverse modelling of observed manganese (Mn) zonation profiles in 40 garnets from two kyanite-bearing metapelite samples from the High Himalayan Crystalline Series, Zanskar, northwest India. Knowledge of the initial growth profile of Mn in garnet is a pre-requisite for this technique. Following previous workers we model Mn partitioning into growing garnet in terms of a Rayleigh fractionation process, and demonstrate that the Mngarnet:whole rock partition coefficient is 60–100. Three-dimensional zonation profiles were obtained by successively grinding and polishing ∼1 cm slabs of each sample at 0.1–0.2 mm intervals and analysing the garnets at each stage, thus ensuring that core sections were measured. The diffusion model assumes that garnet has a spherical geometry and behaves as a closed system, and simulates diffusive modification of the hypothetical Mn Rayleigh growth profile for each garnet. The derived measure of the time-integrated diffusion history for each garnet is then combined with radiometric and field-relation constraints for the duration of the Himalayan metamorphic event to calculate cation diffusion rates. The average cation interdiffusion rate calculated for garnets in the two samples examined is (6 ± 3.2) × 10−23 m2s−1. This interdiffusion rate pertains to a temperature of 690 ± 30 °C, which is 0.97 × T PEAK, the peak temperature conditions experienced by the samples estimated using standard thermobarometric techniques. Garnet compositions are Py2–17Alm65–77Gro6–16Sp1–17. These new diffusion data are consistent with, and more precise than, existing high-temperature (>1000 °C) experimentally determined diffusion data, although some uncertainties remain difficult to constrain. Qualitative comparison between diffusively modified Mn growth profiles in garnets from the Scottish Dalradian and the Himalayan garnets suggests that the duration of metamorphism affecting the Dalradian garnets was 10–20 times longer than that endured by the Himalayan garnets. Received: 5 June 1996 / Accepted: 29 January 1997  相似文献   

17.
Diffusion couples made from homogeneous gem quality natural pyrope and almandine garnets were annealed within graphite capsules under anhydrous conditions at 22–40 kbar, 1057–1400 °C in a piston-cylinder apparatus. The concentration profiles that developed in each couple were modeled to retrieve the self diffusion coefficients [D(I)] of the divalent cations Fe, Mg, Mn and Ca. Because of their usually low concentrations and lack of sufficient compositional change across the interface of the diffusion couples, only a few reliable data can be obtained for D(Ca) and D(Mn) from these experiments. However, nine sets of D(Fe) and D(Mg) data were retrieved in the above P-T range, and cast in the form of Arrhenian relation, D=D 0exp{−[Q(1 bar)+PΔV +]/RT}. The values of the activation energy (Q) and activation volume (ΔV +) depend on whether f O2 is constrained by graphite in the system C-O or held constant. For the first case, we have for Fe:Q(1 bar)=65,532±10,111 cal/mol, D 0=3.50 (±2.30)×10−5 cm2/s, ΔV +=5.6(±2.9) cm3/mol, and for Mg:Q(1 bar)=60,760±8,257 cal/mol, D 0=4.66 (±2.48)×10−5 cm2/s, ΔV +=5.3(±3.0) cm3/mol. Here the ΔV + values have been taken from Chakraborty and Ganguly (1992). For the condition of constant f O2, the Q values are ∼9 kcal lower and ΔV + values are ∼4.9 cm3/mol larger than the above values. Lower temperature extrapolation of the Arrhenian relation for D(Mg) is in good agreement with the Mg tracer diffusion data (D * Mg) of Chakraborty and Rubie (1996) and Cygan and Lasaga (1985) at 1 bar, 750–900 °C, when all data are normalized to the same pressure and to f O2 defined by graphite in the system C-O. The D * Mg data of Schwandt et al. (1995), on the other hand, are lower by more than an order of magnitude than the low temperature extrapolation of the present data, when all data are normalized to the same pressure and to f O2 defined by the graphite buffer. Comparison of the D(Fe), D(Mg) and D(Mn) data in the pyrope-almandine diffusion couple with those in the spessartine-almandine diffusion couple of Chakraborty and Ganguly (1992) shows that the self diffusion of Fe and Mn are significantly enhanced with the increase in Mn/Mg ratio; the enhancement effect on D(Mg) is, however, relatively small. Proper application of the self diffusion data to calculate interdiffusion coefficient or D matrix elements for the purpose of modeling of diffusion processes in natural garnets must take into account these compositional effects on D(I) along with the effects of thermodynamic nonideality, f O2, and pressure. Received: 8 May 1997 / Accepted: 2 October 1997  相似文献   

18.
Activities of CoO in (Co,Mn)O solid solutions in contact with metallic Co have been determined on ten compositions ranging from 0.12 to 0.84 XCoO in order to calibrate the divariant equilibrium between (Co,Mn)O oxide solutions and Co metal as an oxygen fugacity sensor for application in experimental petrology. Experiments were conducted over the temperature range 900–1300 K at 1 bar, using an electrochemical technique with oxygen-specific calcia-stabilized zirconia (CSZ) electrolytes. Co + CoO or Fe + FeO was used as the reference electrode. Compositions of the (Co,Mn)O solid solutions were measured after each run by electron microprobe, and these were checked for internal consistency by measuring the lattice parameter by X-ray diffraction. Activity–composition relations were fitted to the Redlich–Kister formalism. (Co,Mn)O solid solutions exhibit slight positive deviations from ideality, which are symmetrical (corresponding to a regular solution mixing model) across the entire composition range with A0 G = 3690(±47) Jmol−1. Excess entropies and enthalpies were also derived from the emf data and gave Sex=0.77(±0.08) JK−1 mol−1 and Hex=4558(±90) Jmol−1 respectively. The experimental data from this study have been used to formulate the (Co,Mn)O/Co oxygen fugacity sensor to give an expression: where μO2 CoCoO=−492,186 + 509.322 T − 53.284 T lnT + 0.02518 T2, taken from O'Neill and Pownceby (1993). Received: 10 September 1999 / Accepted: 4 April 2000  相似文献   

19.
Carbon and oxygen isotopic profiles around a low pressure metasomatic wollastonite reaction front in a marble of the Hida metamorphic terrain, central Japan, display typical metamorphic fluid-enhanced isotopic zonations. Isotopic profiles obtained from detailed microscale analyses perpendicular to the chemical reaction front in calcite marble show that diffusion-enhanced isotopic exchange may control these profiles. Carbon and oxygen isotopic behaviour in grain boundaries is remarkably different. Oxygen isotopic troughs (18O depleted rims) around the calcite-grain boundaries are widely observed in this contact aureole, demonstrating that diffusion of oxygen in calcite grain boundary dominates over lattice diffusion in calcite. In contrast, no difference is observed in carbon isotopic profiles obtained from grain cores and rims. There is thus no specific role of the grain boundary for diffusion of carbonic species in the metamorphic fluid during transportation. Carbon chemical species such as CO2 and CO3 ions in metamorphic fluid migrate mainly through lattice diffusion. The carbon and oxygen isotope profiles may be modelled by diffusion into a semi-infinite medium. Empirically lattice diffusion of oxygen isotopes is almost six times faster than that of carbon isotopes, and oxygen grain-boundary diffusion is ten times faster than oxygen lattice diffusion. Oxygen isotopic results around the wollastonite vein indicate that migration of the metamorphic fluid into calcite marble was small and was parallel to the aquifer. From the stability of wollastonite and the attainment of oxygen isotopic equilibrium, we suggest that diffusion of oxygen occurred through an aqueous fluid phase. The timescale of formation of the oxygen isotopic profile around the wollastonite vein is calculated to be about 0.76 × 106 years using the experimentally determined diffusion constant. Received: 14 January 1997 / Accepted: 23 April 1998  相似文献   

20.
The Shasta gold-silver deposit, British Columbia, Canada, is an adularia-sericite-type epithermal deposit in which deposition of precious metals coincided with the transition of quartz- to calcite-dominant gangue. Mineralization is associated with stockwork-breccia zones in potassically altered dacitic lapilli tuffs and flows, and consists of pyrite, sphalerite, chalcopyrite, galena, acanthite, electrum and native silver. Pre- and post-ore veins consist solely of quartz and calcite, respectively. Fluid inclusion microthermometry indicates that ore minerals were deposited between 280 ° and 225 °C, from a relatively dilute hydrothermal fluid (˜1.5 wt.% NaCl equivalent). Abundant vapor-rich inclusions in ore-stage calcite are consistent with boiling. Oxygen and hydrogen isotopic data (δ18Ofluid = −1.5 to −4.1‰; δDfluid = −148 to −171‰) suggest that the fluid had a meteoric origin, but was 18O-enriched by interaction with volcanic wallrocks. Initial (˜280 °C) fluid pH and log f O2 conditions are estimated at 5.3 to 6.0, and −32.5 to −33 bar, respectively; during ore deposition, the fluid became more alkaline and oxidizing. Ore deposition at Shasta is attributed to localization of meteoric hydrothermal fluids by extensional faults; mineralization was controlled by boiling in response to hydraulic brecciation. Calcite and base metal sulfides precipitated due to the increase in pH that accompanied boiling, and the associated decrease in H2S concentration led to precipitation of gold and silver. Received: 23 February 1995 / Accepted: 16 April 1996  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号