共查询到20条相似文献，搜索用时 828 毫秒
1.
2.
钢筋锈蚀是严重威胁结构安全的耐久性问题,基于压磁效应,研究均匀锈蚀和坑蚀两种锈蚀钢筋的应力状态与压磁场变化的关系。首先,采用通电加速锈蚀方法进行钢筋均匀锈蚀和点蚀试验;然后,通过轴向拉伸静载试验和疲劳加载试验,分析锈蚀钢筋的压磁信号特征。试验结果显示,磁感强度与钢筋应力状态之间具有较好的对应关系,屈服阶段不同锈蚀率下的钢筋磁感强度曲线有较明显区别,疲劳荷载作用下锈蚀钢筋的法向残余磁感强度和磁滞回环面积均呈现疲劳三阶段变化规律,可进一步运用于钢筋应力状态的检测中。 相似文献
3.
氯化物是钢筋混凝土结构在使用寿命期内可能遇到的一种最危险的侵蚀介质,混凝土中钢筋表面的氯离子浓度超过一定的限值,钢筋就可能会发生锈蚀,锈蚀的钢筋会导致混凝土构件的承载力下降.通过分析国内外研究者所做的大量工作,讨论了氯离子侵入引起的锈蚀钢筋混凝土构件的抗力计算方法,为氯化物环境条件下混凝土结构的耐久性评估提供参考. 相似文献
4.
本文在总结对16块因耐久性破损而拆换下来的码头面板进行详细的鉴定分级和残余承载力测定试验所取得成果的基础上,对砼板破损程度检测方法、破损等级的划分标准以及相应的维修处理提出了建议意见,并提出了由破损程度估计承载力拆减系数的经验公式。 相似文献
5.
考虑软土蠕变导致的土体抗剪强度的衰减效应,建立了软土长期强度模型,用以量化由于土体蠕变导致的土体抗剪强度参数随时间的变化规律。将时变可靠度理论结合有限元强度折减法,提出了考虑软土蠕变对强度影响的高桩码头岸坡时变可靠度算法。采用拉丁超立方抽样方法来改进传统蒙特卡罗法的随机抽样过程,提高计算效率。针对某一岸坡实例,将采用本文算法计算得到的可靠度结果与其他算法评估的结果进行对比分析,验证本文算法的可靠性。最后以我国沿海某高桩码头岸坡为例,基于本文算法评估了该码头岸坡的时变可靠度,分析了岸坡稳定性的时变规律。文中提出的时变可靠度分析方法不仅可以为在役高桩码头岸坡的安全评估提供强有力的技术支撑,同时也能为一些新建工程项目提供一定的参考应用价值。 相似文献
6.
《中国海洋大学学报(自然科学版)》2021,51(8)
高桩码头在港口中应用较为广泛,与重力式码头相比,其耐久性较差,因此,其结构可靠度的研究对于工程安全运行至关重要。目前,高桩码头可靠性的研究大多局限于构件层面,特别是忽略了构件失效之间的联系,不能反映整体的安全性能。本文通过ANSYS软件建立高桩码头参数化数值模型,综合考虑失效模式之间的联系,计算码头的水平向极限承载力,进而求解码头的可靠指标。结果表明,本工程实例的码头水平向极限承载力服从正态分布;采用JC法算得码头水平向可靠指标为21.78,码头自身结构在水平向的安全储备较大。本文的分析方法可对高桩码头的设计和安全运营提供技术支持。 相似文献
7.
8.
9.
提出一种随机分布点蚀损伤的模拟方法,模拟点蚀在构件表面的随机生长过程,并建立了随机态点蚀损伤圆管截面的有限元分析模型;设计了三个受不同腐蚀深度点蚀损伤的圆管构件,并开展轴压试验,利用试验结果校验有限元模型的计算精度;在多种腐蚀情形下(点蚀强度和腐蚀深度变化),研究点蚀分布模式变化引起的极限强度退化及其变异性;比较随机分布点蚀模型与传统腐蚀模型(规则分布点蚀和均匀腐蚀)在计算强度和结构失效行为方面的差异。研究结果表明,点蚀的随机分布模式会引起显著的极限强度变异,且蚀坑深度越大,强度变异越大,蚀坑分布造成的强度极差与强度均值相比达到5%;随机分布点蚀相比于传统腐蚀模型,除了引起更为严重的强度削减,还会改变结构的破坏模式。提出的随机点蚀损伤的模拟方法,可替代昂贵的构件试验,应用于评估点蚀损伤圆管截面的极限强度,增强评估结果的可靠性。 相似文献
10.
11.
本文首先通过理论分析推导出一个近似的钢筋混凝土海工结构经济使用年限推算方法。然后以天津港高桩码头为例，推算了它的经济使用年限，推算结果已供用户参考使用。 相似文献
12.
Jingbo Su Jianfeng Li Ruihu Zhu Wanggen Qin Qiu Zhai 《Marine Georesources & Geotechnology》2016,34(7):689-702
To assess the impact of pile driving on adjacent submarine pipelines during the reconstruction of a pier berth, the local damage model of submarine pipelines is established to explore the safety thresholds of the particle peak velocity and horizontal displacement. The results are analyzed and adjusted by the existing standards and the corresponding literatures. Then, a three-dimensional numerical model is presented to assess the feasibility of the construction of piles by the obtained safety limits, in which the nonlinear behavior of the soil and stress–seepage coupling analysis are considered. After the construction, the safety of submarine pipelines is rechecked by the measured value of the particle peak velocity and horizontal displacement. Meanwhile, the propagation law of vibration, the horizontal displacement of underground soil, and the pore pressure during pile driving are explored. The results indicate that the construction of piles of 2# mooring pier did not cause damage to adjacent submarine pipelines. However, the construction of piles of 1# mooring pier which is nearer may cause damage to submarine pipelines. 相似文献
13.
Two- and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier. 相似文献
14.
Ping Wu Yang Guo Dayong Zhu Weiliang Jin Zhenhua Zhang Rongzhu Liang 《Marine Georesources & Geotechnology》2020,38(5):518-526
AbstractThis study developed prestressed high-strength concrete (PHC) piles reinforced with high-strength materials (glass fiber-reinforced polymer (GFRP) bars) for flexural performance enhancement. Flexural strengths and behaviors of PHC piles reinforced with hybrid GFRP and steel bars were experimentally investigated, respectively. Large-scale specimens with total lengths of 12,000?mm and diameters of 600?mm were constructed and tested under bending, accompanied by evaluation of effects of non-prestressed reinforcement type and longitudinal reinforcement ratio. J-factors were calculated to evaluate deformability of all the specimens. PHC piles reinforced with GFRP bars were demonstrated to have much higher flexural capacity than those reinforced with steel bars. Moreover, strains at the midspans of cross sections of all the specimens basically conformed to the assumption of plane section. Failure of PHC piles reinforced with GFRP bars was attributable to gradual concrete crushing, while that of PHC piles reinforced with steel bars resulted from steel yielding. Results of this study were expected to provide theoretical basis for wide engineering applications of PHC piles reinforced with hybrid GFRP bars and steel bars in marine structures. 相似文献
15.
16.
开展了5根锈胀开裂钢筋混凝土梁疲劳试验并实时记录了梁表面的钢筋压磁信号,研究锈胀开裂混凝土梁的疲劳特性和压磁信号演化规律。结果表明梁疲劳寿命随钢筋锈蚀率增大而急剧减小,梁破坏时混凝土剥落,纵筋发生疲劳断裂;磁信号时变曲线随疲劳进程不断演化,在临近疲劳破坏时曲线形态发生明显畸变,能够反映梁疲劳损伤信息;磁感应强度变化幅值的发展符合三阶段特性,在疲劳初期和破坏前增长明显;磁感应强度变化幅值对钢筋锈蚀敏感,随锈蚀率增加而增大,因此建立了疲劳作用不同阶段磁信号幅值和梁内钢筋锈蚀率的相关关系。 相似文献
17.
Steel bar in concrete structures under harsh environmental conditions, such as chlorine corrosion, seriously affects its service life. Bidirectional electromigration rehabilitation (BIEM) is a new method of repair technology for reinforced concrete structures in such chloride corrosion environments. By applying the BIEM, chloride ions can be removed from the concrete and the migrating corrosion inhibit can be moved to the steel surface. In conventional engineering, the concrete structure is often configured with a multi-layer steel mesh. However, the effect of the BIEM in such structures has not yet been investigated. In this paper, the relevant simulation test is carried out to study the migration law of chloride ions and the migrating corrosion inhibitor in a concrete specimen with complex steel mesh under different energizing modes. The results show that the efficiency of the BIEM increases 50% in both the monolayer steel mesh and the double-layer steel mesh. By using the single-sided BIEM, 87% of the chloride ions are removed from the steel surface. The different step modes can affect the chloride ion removal. The chloride ions within the range of the reinforcement protective cover are easier to be removed than those in the concrete between the two layers of steel mesh. However, the amount of migrating corrosion inhibitor is larger in the latter circumstances. 相似文献
18.
An experimental research was conducted to determine the corrosion and bearing capacity of a reinforced concrete (RC) slab at different ages in a marine environment. Results show that the development of corrosion-induced cracks on a slab in a marine environment can be divided into three stages according to crack morphology at the bottom of the slab. In the first stage, cracks appear. In the second stage, cracks develop from the edges to the middle of the slab. In the third stage, longitudinal and transverse corrosion-induced cracks coexist. The corrosion ratio of reinforcements nonlinearly increases with the age, and the relationship between the corrosion ratio of the reinforcements and the corrosion-induced crack width of the concrete is established. The flexural capacity of the corroded RC slab nonlinearly decreases with the age, and the model for the bearing capacity factor of the corroded RC slab is established. The mid-span deflection of the corroded RC slab that corresponds to the yield of the reinforcements linearly increases with the increase in corrosion ratio. Finally, the mechanisms of corrosion morphology and the degradation of the mechanical properties of an RC slab in a marine environment are discussed on the basis of the basic theories of steel corrosion in concrete and concrete structure design. 相似文献
19.
Bong Ju Kim 《Ocean Engineering》2010,37(13):1159-1168
The aim of this study was to evaluate the load characteristics of steel and concrete tubular members under jet fire, with the motivation to investigate the jet fire load characteristics in FPSO topsides. This paper is part of Phase II of the joint industry project on explosion and fire engineering of FPSOs (EFEF JIP) (
[Paik and Czujko, 2009] and [Paik, 2010]). To obtain reliable load values, jet fire tests were carried out in parallel with a numerical study. Computational fluid dynamics (CFD) simulation was used to set up an adiabatic wall boundary condition for the jet fire to model the heat transfer mechanism. A concrete tubular member was tested under the assumption that there is no conduction effect from jet fire. A steel tubular member was tested and considered to transfer heat through conduction, convection, and radiation. The temperature distribution, or heat load, was analyzed at specific locations on each type of member. ANSYS CFX, (2008) and KFX, 2007 codes were used to obtain similar fire action in the numerical and experimental methods. The results of this study will provide a useful database to determine design values related to jet fire. 相似文献
20.
近年来,潮流能能量转换技术发展迅速,但大型潮流发电机组基础结构方面的研究和应用还并不多见。针对潮流能电站基础结构在抗弯抗剪强度、桩径尺寸方面的特殊要求,结合我国潮流能富集区海底多为浅覆盖层或裸露基岩、且地形复杂的情况,提出了一种新型模块式嵌岩灌注桩基础结构。该基础结构的嵌岩灌注桩通过在桩内布置环形钢板箍和钢筋束来增强抗剪抗弯能力,使其在常规桩径即可满足潮流能电站的支撑要求,减少了对发电水流断面的阻挡;各主体灌注桩可通过横撑、纵撑和斜撑连接构成模块式基础,以适应不同地形条件、不同机组数量和安装方式的要求。新型模块式嵌岩灌注桩基础结构在LHD联合动能公司3.4 MV潮流发电项目中进行了首次应用,获得了良好的使用反馈。 相似文献