共查询到20条相似文献，搜索用时 390 毫秒
1.
Downhole resistivity measurements provide valuable information for geosteering and formation evaluation. It is important to understand and correct the environmental effects, such as the borehole, the tool eccentricity and the resistivity anisotropy effects, of the measurements based on fast and accurate modelling methods. A new pseudo-analytic solution for eccentric coaxial and tilted-coil antennas in the cylindrically multilayered medium with transverse isotropic conductivity was developed. This method can take the eccentric tool, the borehole, the mud invasion and the resistivity anisotropy into account. These formulas enable us to simulate the responses of the downhole induction logging tools, including induction wireline and azimuthal propagation logging-while-drilling measurements. Instead of using the prior fictitious boundary, the generalized reflection coefficients are proposed to construct the linear matrix functions to deal with the tool eccentricity. The cylindrical functions are reorganized and presented in forms of ratios. Thus, the proposed formulas obviate the overflow issue in the computation and are more stable and efficient. The proposed approach is compared and validated with other well-established methods. Simulations and case studies show that: (1) the responses of azimuthal resistivity logging-while-drilling tool are affected by the tool's eccentricity in both isotropic and anisotropic medium; (2) sine curve behaviours exist for the phase difference and amplitude ratio of azimuthal resistivity measurements along with different eccentricity azimuth. 相似文献
2.
3.
The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy. 相似文献
4.
用于低渗砂岩油气开发的压裂需要地层的纵横波时差参数;压裂形成的人工裂缝或砂泥岩中的自然裂缝是油气流入井中的主要通道.声波测井是测量地层的纵横波时差、探测连通裂缝的有效方法.本文给出了新设计的偶极子组合声波测井仪器在低渗砂泥岩地层所测量的波形.新仪器利用声波在井内传播的固有频率设计探头,利用探头阻抗随频率的变化曲线设计匹配电路,有效地提高了声发射功率,在井下采用16位A/D转换器提高了原始波形的采样精度.测量的波形比通常的声波测井波形所含的地层信息丰富.单极子长源距声波测井波形中除了通常的纵、横波和Stoneley波外,还发现了起始于纵波首波的反射波以及随深度改变其到达时间的后续波.通过与其它测井曲线综合对比发现:其反射波与井眼扩径有关,使测量的声波时差加大;后续波在显示地层特征的同时,与横波混叠在一起,使横波时差的提取变得困难.另外,在偶极子所测量的低频波形中也发现了明显的反映地层连通裂缝的反射波,该反射波可以用于指示低渗砂岩地层中的连通裂缝. 相似文献
5.
Dispersion and radial depth of investigation of borehole modes 总被引：2，自引：0，他引：2
Sonic techniques in geophysical prospecting involve elastic wave velocity measurements that are performed by placing acoustic transmitters and receivers in a fluid‐filled borehole. The signals recorded at the receivers are processed to obtain compressional‐ and shear‐wave velocities in the surrounding formation. These velocities are generally used in seismic surveys for the time‐to‐depth conversion and other formation parameters, such as porosity and lithology. Depending upon the type of transmitter used (e.g. monopole or dipole) and as a result of eccentering, it is possible to excite axisymmetric (n= 0) , flexural (n= 1) and quadrupole (n= 2) families of modes propagating along the borehole. We present a study of various propagating and leaky modes that includes their dispersion and attenuation characteristics caused by radiation into the surrounding formation. A knowledge of propagation characteristics of borehole modes helps in a proper selection of transmitter bandwidth for suppressing unwanted modes that create problems in the inversion for the compressional‐ and shear‐wave velocities from the dispersive arrivals. It also helps in the design of a transmitter for a preferential excitation of a given mode in order to reduce interference with drill‐collar or drilling noise for sonic measurements‐while‐drilling. Computational results for the axisymmetric family of modes in a fast formation with a shear‐wave velocity of 2032 m/s show the existence of Stoneley, pseudo‐Rayleigh and anharmonic cut‐off modes. In a slow formation with a shear‐wave velocity of 508 m/s, we find the existence of the Stoneley mode and the first leaky compressional mode which cuts in at approximately the same normalized frequency ωa/VS= 2.5 (a is the borehole radius) as that of the fast formation. The corresponding modes among the flexural family include the lowest‐order flexural and anharmonic cut‐off modes. For both the fast and slow formations, the first anharmonic mode cuts in at a normalized frequency ωa/VS= 1.5 approximately. Cut‐off frequencies of anharmonic modes are inversely proportional to the borehole radius in the absence of any tool. The borehole quadrupole mode can also be used for estimating formation shear slownesses. The radial depth of investigation with a quadrupole mode is marginally less than that of a flexural mode because of its higher frequency of excitation. 相似文献
6.
探索基于孔隙介质动电效应的随钻测井新方法是当前测井勘探领域的热点研究之一.本文针对随钻测井情况下的动(声)-电转换机理,在砂岩模型井中进行了多极源(单/偶/四极源)随钻动电测井实验研究,记录了井中声波激发动电转换波场的时域波形,给出了各分波的时间-速度图,并与多极源随钻声波测井数据进行对比,结果表明:钻铤波诱导的动电转换信号在随钻动电测井全波中的相对幅度显著降低,从而可准确提取到地层声波的传播速度,实现了利用随钻动电测井方法测量地层波速的目的,验证了随钻动电测井技术可有效抑制钻铤波的思想.本文还进一步分析了钻铤波的动电耦合特性,并结合有机玻璃模型井中随钻动电测井和无井孔模型下的随钻声波测量,研究了伴随钻铤波电场信号的传播特性和衰减规律,深入探讨了随钻动电测井全波中钻铤波被削弱的原因,并给出了定量的实验数据分析,为随钻动电测井理论模拟的解释提供有效实验数据支撑. 相似文献
7.
井中声激发极化效应研究是实现声激发极化测井实用化的技术基础,实质上是声波在双相孔隙介质中向电磁波的转化,其结果就是形成井中声电转换波场,最终表现为井中声场辐射能向电磁场能的转化.通过对双相孔隙介质中声激发极化过程声电转换波场能量的理论分析,研究了井中声电转换波场能量的总体构成,提出了井中低频声激发极化电场电能体密度的概念,并推导出具体表达式.通过采用实际地层参数模型进行井中低频声激发极化电场的模拟计算得到了井中低频声激发极化过程中电能体密度与声波频率与地层参数的相关关系. 相似文献
8.
在电缆测井中,可以利用偶极声场中的弯曲波反演软地层的横波速度.然而,在随钻声波测井(LWD)中,钢制钻铤的存在使得井孔结构变得复杂,同时改变了井孔声场,弯曲波也变得难以测定.此外,弯曲波与钻铤波耦合在一起,使得地层横波速度的反演变得困难.本文计算分析了随钻声场的频散曲线和激发曲线,注意到了偶极舒尔特波在较宽频带内速度频散很弱,特别是在本文研究的软地层情况下,偶极舒尔特波速度在3至25kHz的频率范围内几乎为一个常值,并且该值与地层横波速度存在一一对应关系.舒尔特波速度远小于其他模式波速度,与其他模式波在时域上易分离.相对于其他地层参数,舒尔特波对地层横波速度十分敏感.因此,它可以用来反演软地层的横波速度. 相似文献
9.
An approach to characterization of multilayer aquifer systems using open well borehole dilution is described. The approach involves measuring observation well flow velocities while a nearby extraction well is pumped by introducing a saline tracer into observation wells and collecting dilution vs. depth profiles. Inspection of tracer profile evolution allows discrete permeable layers within the aquifer to be identified. Dilution profiles for well sections between permeable layers are then converted into vertical borehole flow velocities and their evolution, using an analytic solution to the advection-dispersion equation applied to borehole flow. The dilution approach is potentially able to measure much smaller flow velocities that would be detectable using flowmeters. Vertical flow velocity data from the observation wells are then matched to those generated using a hydraulic model of the aquifer system, "shorted" by the observation wells, to yield the hydraulic properties of the constituent layers. Observation well flow monitoring of pumping tests represents a cost-effective alternative or preliminary approach to pump testing each layer of a multilayer aquifer system separately using straddle packers or screened wells and requires no prior knowledge of permeable layer depths and thicknesses. The modification described here, of using tracer dilution rather than flowmeter logging to obtain well flow velocities, allows the approach to be extended to greater well separations, thus characterizing a larger volume of the aquifer. An example of the application of this approach to a multilayer Chalk Aquifer in Yorkshire, Northeast England, is presented. 相似文献
10.
A guided wave along a borehole is often observed in borehole radar measurements. These guided waves deform the antenna pattern and can cause artefacts in radar measurements. A water-filled borehole or a conducting logging cable can function as a waveguide for electromagnetic waves under some conditions. We describe the theoretical characteristics of such a guided wave in a borehole and compare them with our experiments. The measured signal discussed was obtained with a directional borehole radar. This radar uses a cylindrical conformal array antenna as receiver and is a model of a conducting structure in a borehole. The induced field around the borehole was compared with the theory. The most fundamental symmetrical and asymmetrical modes were TM01 and HE11, and they were identified in the measured signals using time–frequency distribution analysis and by observation of the azimuthal field distribution of the magnetic field. 相似文献
11.
12.
基于孔隙介质动电效应的测量方法在油气勘探领域有着巨大的潜在应用价值.本文针对理论预测的随钻动电测井可削弱钻铤波对地层声波干扰的问题,设计了室内随钻动电测井实验装置和测量系统,并在小尺寸砂岩模型井中开展了随钻动电测井实验研究.为了突出随钻动电测井技术的特点,本文先在砂岩模型井中进行了电缆声波测井和电缆动电测井实验测量,获得了地层声波的传播速度.然后又在同一模型井中进行了随钻声波测井和随钻动电测井实验,记录了这两种情况下的测井全波波形,比较了电缆声波/动电测井和随钻声波/动电测井的差异性,并进一步分析了钻铤波和井中动电转换信号的传播特性.本文还通过随钻动电测井的时域波形提取到被测地层的纵横波速度,从实验角度验证了随钻动电测井技术测量地层波速的可行性.此外,本文实验结果对随钻动电测井的仪器设计及现场测量也有参考意义. 相似文献
13.
数值计算了四极子声源在含钻铤竖直向横向各向同性(VTI)地层井孔中产生的各种模式波的频散曲线、激发幅度以及对各地层、钻铤参数的灵敏度,合成了四极子阵列波形,研究了快、慢速地层井孔中地层各向异性的存在对四极子波场的影响.数值计算结果表明,地层各向异性对钻铤波的影响很小,对于地层波的影响较大,且影响因素非常复杂.仅在一些特殊的频率点处,地层模式波的控制因素相对较为简单,如螺旋波的截止频率处.在慢速地层井孔中,最低阶的地层四极子波对距离井壁约2个井孔半径内的地层有明显的响应,可以对该范围内的地层横波进行层析成像.在快速地层井孔条件下,可以考虑采用与横波到时相同的波包来评价地层横波信息.该波包包含了井孔折射横波、F1和F2模式与井孔折射横波速度相接近的部分;利用该波包获得的地层横波速度基本不受地层各向异性的影响.在慢速地层情况下,螺旋波受地层各向异性的影响较大,建议在实际数据处理时,考虑采用基于数据的处理方法进行频散校正. 相似文献
14.
在油、气储层的勘探和开发中观察到的一个现象是储层岩石中普遍存在孔隙和裂隙.随着近年来孔、裂隙介质弹性波动理论的进展,我们可以将此理论应用于测井技术,以此来指导从声波测井中测量孔、裂隙地层的声学参数.本文计算了孔、裂隙地层里充流体井眼中的多极子声场,分析了声场随裂隙介质的两个主要参数(即裂隙密度和裂隙纵横比)的变化特征.井孔声场的数值计算表明裂隙密度可以大幅度地降低井中声波纵、横波的波速和振幅.随着裂隙密度的增加,在测井频段内也可以看到纵、横波速的频散现象(这种频散在孔隙地层中一般是观察不到的).本文还研究了多极子模式波 (即单极的Stoneley波、伪瑞利波以及偶极的弯曲波)随裂隙参数的变化特征.结果表明,这些模式波的振幅激发和速度频散都受裂隙密度的影响.裂隙密度越高影响越大.此外,裂隙还对模式波的传播造成较大的衰减.相对裂隙密度而言,裂隙纵横比是一个频率控制参数,它控制裂隙对声场影响的频率区间.本文的分析结果对裂缝、孔隙型地层的声波测井具有指导意义. 相似文献
15.
本文从数值上研究了裸眼井中弹性波传播的非对称模式,给出了合成微地震图和导波（弯曲波）的频散曲线,发现在“硬”地层和“软”地层的井中,导波都是高度频散的,其最大相速度等于地层的横波速度,其截止频率低于对称模式的伪瑞利波的截止频率;在低频（2-3kHz）和长源距（3-4m）的条件下,由非对称的声源（如声偶极子）所产生的微地震图中,初至信号是以横波速度传播的,而以纵波速度传播的信号被抑制。本文的结果对研制横波速度测井仪是有意义的。 相似文献
16.
本文将应用2.5维数值模式匹配算法研究建立柱状横向同性地层中偏心条件下磁流源并矢Green函数的高效算法,并利用该算法高效计算多分量阵列感应井眼校正库.首先,通过Fourier展开技术将偏心条件下磁流源并矢Green函数的数值模拟转化为一系列的轴对称问题;然后利用模式匹配算法求解轴对称问题,得到柱状介质中偏心条件下磁流源并矢Green函数的半解析解;最后,结合中国石油集团测井有限公司开发的三维感应测井仪器(TDIT)的结构参数,推导出复合线圈系视电导率张量的计算公式.在此基础上,根据井场实际地层资料归纳出理论地层模型相应参数的变化范围,高效高精度建立一套直接应用于工业生产的多分量阵列感应井眼校正库,并利用井眼校正库详细地分析考察各模型参数对TDIT响应的影响. 相似文献
17.
针对横向各向同性地层随钻声波测井模型,通过模式分析的方法,考察了快速地层和慢速地层井孔内随钻单极子、偶极子和四极子声源激发的斯通利波、弯曲波和螺旋波的相速度频散和激发强度特征,计算了这些模式波对于地层弹性常数的灵敏度,并与电缆测井中的情况进行了比较.结果表明:随钻斯通利波在低频时对地层弹性常数中c66的灵敏度较电缆测井中有了很大提高,可用于反演地层水平向横波速度;随钻偶极子最低阶弯曲波在低频时不能用于直接获取地层横波信息,但在慢速地层中频率较高(例如6 kHz)时却可以间接得到地层垂直向横波速度;随钻四极子螺旋波的特征与电缆测井中的类似,可用于获取地层垂直向横波速度. 相似文献
18.
模拟弹性波在孔隙介质中传播,需要稳定有效的吸收边界来消除或尽可能的减小由人工边界引起的虚假反射. 本文在前人工作基础上,首次建立了弹性孔隙介质情况下完全匹配层吸收边界的高阶速度-应力交错网格有限差分算法,并详细讨论了完全匹配层的构建及其有限差分算法实现. 首先,本文通过均匀孔隙模型的数值解与解析解的对比,验证所提出的数值方法的正确性;然后,本文考察了完全匹配层对不同入射角度入射波和自由表面上的瑞利波的吸收性能,将完全匹配层与廖氏和阻尼吸收边界进行了对比,研究了这三种吸收边界在不同吸收厚度情况下对弹性波吸收能力. 数值结果表明,在孔隙介质中,完全匹配层作为吸收边界能十分有效地吸收衰减外行波,无论对体波还是面波,是一种高效边界吸收算法. 相似文献
19.
Recent studies have revealed the great potential of acoustic reflection logging in detecting near borehole fractures and vugs. The new design of acoustic reflection imaging tool with a closest spacing of 10.6m and a certain degree of phase steering makes it easier to extract the reflection signals from the borehole mode waves. For field applications of the tool, we had developed the corresponding processing software: Acoustic Reflection Imaging. In this paper, we have further developed an effective data processing flow by employing multi‐scale slowness‐time‐coherence for reflection wave extraction and incorporating reverse time migration for imaging complicated subtle structures with the strong effects of borehole environment. Applications of the processing flow to synthetic data of acoustic reflection logging in a fractured formation model and interface model with fluid filled borehole generated by 2D finite difference method, and to the physical modelling data from a laboratory water tank, as well as to the field data from two wells in a western Chinese oil field, demonstrate the validity and capability of our multi‐scale slowness‐time‐coherence and reverse time migration algorithms. 相似文献
20.
An exact formulation for borehole coupling, which is valid for all frequencies and all azimuthally symmetric and non-symmetric components, is presented. The borehole effects on downhole seismic measurements are studied in detail as functions of frequency, angle of incidence and polarization of an incident wave as well as geophone orientation. We found that correction for the borehole effect on downhole measurements should be made for frequencies above 500 Hz in a hard formation. In a soft formation, if the angle of incidence is well away from the resonance angle for SV incidence, no borehole correction is needed for frequencies below 300 Hz, while for frequencies above 300 Hz, the borehole can cause severe problems in downhole measurements. The borehole can also significantly alter the particle motion direction which implies that horizontal component rotation from data itself is unreliable for experiments with frequencies above 1 kHz in the hard formation and around 500 Hz in the soft formation. 相似文献