共查询到20条相似文献，搜索用时 46 毫秒
1.
The deflection, at a step-shelf fronted coast, of a constant potential vorticity current in a reduced-gravity, inviscid model ocean is studied theoretically. The step shelf, with a depth smaller than the reservoir depth, forces the uplifting of the approaching current and causes water column foreshortening, leading to relative vorticity generation that enhances current deflection to the right (facing the coast). As a consequence, in comparison to the case of a vertical wall coast, the proportion of the transport to the right is increased. For normal incidence for a shelf-depth/reservoir-depth ratio of 0.3 and shelf width to deformation radius ratio of 1.5, more than 90% of the approaching current transport goes to the right and less than 10% to the left. In addition, the (barotropic) dynamic pressure at the coast is low to the right and high to the left (with the highest pressure at the stagnation point). In the vertical wall case, the wall pressures on the flank are equal. For oblique incidence from the left, the deflection to the left is drastically reduced. In fact, there is practically no steady-state flow diverted to the left (less than 2%) when the approach angle is greater than 60° to the left of normal. In the vertical wall case, the same angle would have to be 90° for the flow to the left to vanish, namely only when the approach current is parallel to the coast to the right. 相似文献
2.
The advent of missions comprised of phased arrays of spacecraft, with separation distances ranging down to at least mesoscales, provides the scientific community with an opportunity to accurately analyse the spatial and temporal dependencies of structures in space plasmas. Exploitation of the multi-point data sets, giving vastly more information than in previous missions, thereby allows unique study of their small-scale physics. It remains an outstanding problem, however, to understand in what way comparative information across spacecraft is best built into any analysis of the combined data. Different investigations appear to demand different methods of data co-ordination. Of the various multi-spacecraft data analysis techniques developed to affect this exploitation, the discontinuity analyser has been designed to investigate the macroscopic properties (topology and motion) of boundaries, revealed by multi-spacecraft magnetometer data, where the possibility of at least mesoscale structure is considered. It has been found that the analysis of planar structures is more straightforward than the analysis of non-planar boundaries, where the effects of topology and motion become interwoven in the data, and we argue here that it becomes necessary to customise the analysis for non-planar events to the type of structure at hand. One issue central to the discontinuity analyser, for instance, is the calculation of normal vectors to the structure. In the case of planar and ‘thin’ non-planar structures, the method of normal determination is well-defined, although subject to uncertainties arising from unwanted signatures. In the case of ‘thick’, non-planar structures, however, the method of determination becomes particularly sensitive to the type of physical sampling that is present. It is the purpose of this article to firstly review the discontinuity analyser technique and secondly, to discuss the analysis of the normals to thick non-planar structures detected in magnetometer data. 相似文献
3.
The southwest border of the Parecis Basin (central Brazil) presents several occurrences of gold, copper and zinc. Parallel to this border, there is an alignment of magnetic anomalies with varied size and polarities. In particular, five magnetic anomalies are referred to, in this study, as SJ1 to SJ5. The proximity of these anomalies to each other makes it hard to isolate the magnetic component associated with each source. Furthermore, these anomalies have different magnetization directions, which require the use of a technique which is slightly or not affected by the presence of a remanent magnetization, as the amplitude of the anomalous magnetic field. Considering that, in these intrusions no outcrops are observed, the enhanced horizontal derivative technique was used to estimate the edges location and the depth of these sources. The geological context, allied to the results from the magnetic techniques, allowed to establish binds to restrain the interpretation of the results of the 3D inversion. This procedure permitted to compose three hypothesis to explain the magnetic behavior of the region, from which can be conclusively determined with a borehole analysis. 相似文献
4.
The growth of maritime transport and oil exploitation activities may increase the risk of oil spills. Thus, plans and actions to prevent or mitigate impacts are needed to minimize the effects caused by oil. However, tools used worldwide to support contingency plans have not been integrated, thus leading to failure in establishing priority areas. This investigation aimed to develop indices of environmental vulnerability to oil (IEVO), by combining information about environmental sensibility to oil and results of numerical modeling of spilled oil. To achieve that, a case study concerning to oil spills scenarios in a subtropical coastal area was designed, and IEVOs were calculated and presented in maps, in order to make the information about the areas’ vulnerability more easily visualized. For summer, the extension of coastline potentially affected by oil was approximately 150 km, and most of the coastline presented medium to high vulnerability. For winter, 230 km coastline would be affected, from which 75% were classified as medium to high vulnerability. Thus, IEVO maps allowed a rapid and clearer interpretation of the vulnerability of the mapped region, facilitating the planning process and the actions in response to an oil spill. 相似文献
5.
将用于图像处理的光顺技术引用到速度谱能量团曲面的处理环节,借以提高速度谱的分辨率,为最终获得高精确解提供一全新的途径.具体思路是基于路径积分优化法--Viterbi算法所具有的自动搜寻及获取最优解的功能,将其应用于地震资料处理中的速度自动拾取,使其向前做最大"能量团"的积分向后递归计算最优解--叠加速度,但这种解的准确性往往与所定义的目标函数--速度谱的分辨率有关.演算结果表明,Viterbi算法与关顺处理技术的有机结合,不仅提高了速度提取的精度,而且实现了速度的自动拾取,可提高常规地震资料处理的效率,从而可快捷地为叠前深度偏移提供所需初始速度模型. 相似文献
6.
《Journal of Geodynamics》2006,41(4-5):487-493
The focus of this paper is to present the concepts for a new dynamic, i.e. database-driven information system for the International Earth Rotation and Reference Systems Service (IERS). Its goal is to coordinate the data and information flow between the participating institutions. Therefore, all relevant data and products of the IERS should be archived to guarantee their long-term availability. At the same time the consistency and timeliness of the contents of the information system can be guaranteed by managing the information in a database. Additionally, the metadata of all products (including the IERS publications) should be modelled in a database to allow the users to search for specific data or topics with respect to space, time and content. In order to be able to link related data the heterogeneous formats of the products have to be transformed into a common format. The eXtensible Markup Language (XML) is going to be used, to perform this ambitious task. The usage of XML not only allows to link related data but also to easily exchange data and to present them in different ways like Web pages, pdf, etc. The system will be completed by several tools to manage and coordinate the tasks of the Central Bureau (CB) and by an information system with respect to IERS-related topics. The standardised database tools will also allow an easy exchange of information with and links to other databases within the IGGOS project to realize a powerful instrument to serve the Earth observing system. 相似文献
7.
结合清原地震台台站水准1985年前后观测成果精度的变化，总结了提高台站短水准观测成果精度的几点主要成功措施。它们是：选择最佳视线长度；拓宽线路、增高视线、减弱折光影响；改造仪器站条件；固定观测时间和人员；确定好观测光段。 相似文献
8.
9.
10.
Iunio Iervolino Carmine Galasso Roberto Paolucci Francesca Pacor 《Bulletin of Earthquake Engineering》2011,9(6):1761-1778
This paper introduces REXELite, an internet version of REXEL, a software for automatic selection of ground motion suites for
nonlinear dynamic analysis of structures. REXELite was developed with the aim of integrating an advanced earthquake records’
repository, such as the ITalian ACcelerometric Archive (ITACA), with a tool to define seismic input for engineering seismic
analysis according to international standards (with priority to Europe). In fact, REXELite allows to define target design
spectra according either to Eurocode 8 or to the Italian building code, and to search ITACA for suitable sets of seven records
(comprised of one or two horizontal ground motion components) matching such target spectra: on average, in a user-specified
period range, and with the desired tolerance. The records in the set also have, individually and according to some criteria,
the most similar spectral shape with respect to that of the code. Selection options include magnitude, source-to-site distance,
soil conditions and, if desired, linear scaling of records to reduce further record-to-record variability of the selected
suite. 相似文献
11.
12.
Abdoul R. Ghotbi 《地震工程与工程振动(英文版)》2014,13(3):357-373
The seismic behavior of skewed bridges has not been well studied compared to straight bridges. Skewed bridges have shown extensive damage, especially due to deck rotation, shear keys failure, abutment unseating and columnbent drift. This research, therefore, aims to study the behavior of skewed and straight highway overpass bridges both with and without taking into account the effects of Soil-Structure Interaction(SSI) due to near-fault ground motions. Due to several sources of uncertainty associated with the ground motions, soil and structure, a probabilistic approach is needed. Thus, a probabilistic methodology similar to the one developed by the Pacific Earthquake Engineering Research Center(PEER) has been utilized to assess the probability of damage due to various levels of shaking using appropriate intensity measures with minimum dispersions. The probabilistic analyses were performed for various bridge confi gurations and site conditions, including sand ranging from loose to dense and clay ranging from soft to stiff, in order to evaluate the effects. The results proved a considerable susceptibility of skewed bridges to deck rotation and shear keys displacement. It was also found that SSI had a decreasing effect on the damage probability for various demands compared to the fixed-base model without including SSI. However, deck rotation for all types of the soil and also abutment unseating for very loose sand and soft clay showed an increase in damage probability compared to the fixed-base model. The damage probability for various demands has also been found to decrease with an increase of soil strength for both sandy and clayey sites. With respect to the variations in the skew angle, an increase in skew angle has had an increasing effect on the amplitude of the seismic response for various demands. Deck rotation has been very sensitive to the increase in the skew angle; therefore, as the skew angle increased, the deck rotation responded accordingly. Furthermore, abutment unseating showed an increasing trend due to an increase in skew angle for both fixed-base and SSI models. 相似文献
13.
This article is devoted to application of a simulation algorithm based on geostatistical methods to compile and update seismotectonic provinces in which Iran has been chosen as a case study. Traditionally, tectonic maps together with seismological data and information (e.g., earthquake catalogues, earthquake mechanism, and microseismic data) have been used to update seismotectonic provinces. In many cases, incomplete earthquake catalogues are one of the important challenges in this procedure. To overcome this problem, a geostatistical simulation algorithm, turning band simulation, TBSIM, was applied to make a synthetic data to improve incomplete earthquake catalogues. Then, the synthetic data was added to the traditional information to study the seismicity homogeneity and classify the areas according to tectonic and seismic properties to update seismotectonic provinces. In this paper, (i) different magnitude types in the studied catalogues have been homogenized to moment magnitude (Mw), and earthquake declustering was then carried out to remove aftershocks and foreshocks; (ii) time normalization method was introduced to decrease the uncertainty in a temporal domain prior to start the simulation procedure; (iii) variography has been carried out in each subregion to study spatial regressions (e.g., west-southwestern area showed a spatial regression from 0.4 to 1.4 decimal degrees; the maximum range identified in the azimuth of 135?±?10); (iv) TBSIM algorithm was then applied to make simulated events which gave rise to make 68,800 synthetic events according to the spatial regression found in several directions; (v) simulated events (i.e., magnitudes) were classified based on their intensity in ArcGIS packages and homogenous seismic zones have been determined. Finally, according to the synthetic data, tectonic features, and actual earthquake catalogues, 17 seismotectonic provinces were introduced in four major classes introduced as very high, high, moderate, and low seismic potential provinces. Seismotectonic properties of very high seismic potential provinces have been also presented. 相似文献
14.
An assessment of metal contamination in surface sediments of the Jiaozhou Bay, Qingdao, one of the rapidly developing coastal economic zones in China, is provided. Sediments were collected from 10 stations and a total of 15 heavy metals were analyzed. Concentrations of metals show significant variability and range from 210 to 620 ppm for Ti, 2.7 to 23 ppm for Ni, 4.2 to 28 ppm for Cu, 5.2 to 18 ppm for Pb, 12 to 58 ppm for Zn, 0.03 to 0.11 ppm for Cd, 5 to 51 ppm for Cr, 1.5 to 9.9 ppm for Co, 5.3 to 19 ppm for As, 12 to 32 ppm for Se, and 19 to 97 ppm for Sr. Based on concentration relationships and enrichment factor (EF) analyses, the results indicate that sediment grain size and organic matter played important roles in controlling the distribution of the heavy metals in surface sediments of the Jiaozhou Bay. The study shows that the sediment of the Jiaozhou Bay has been contaminated by heavy metals to various degrees, with prominent arsenic contributing the most to the contamination. The analysis suggests that the major sources of metal contamination in the Jiaozhou Bay are land‐based anthropogenic ones, such as discharge of industrial waste water and municipal sewage and run‐off. Notably, the elevated heavy metal concentrations of the Jiaozhou Bay sediments could have a significant impact on the bay's ecosystem. With the rapid economic development and urbanization around the Jiaozhou Bay, coastal management and pollution control should focus on these contaminant sources, as well as provide ongoing monitoring studies of heavy metal contamination within the bay. 相似文献
15.
Data use and information creation: challenges for marine scientists and for managers 总被引：1，自引：0，他引：1
In the coastal waters of European countries and in the offshore waters of the north-east Atlantic, there is an increasing need for scientists to meet challenging objectives, such as to identify meaningful measures of 'quality', and to recommend 'indicators' to underpin implementation of directives, conventions, statutes and other more informal national and international initiatives. Those indicators may relate to particular species or habitats, to changes in physical and chemical characteristics, and even to the use to which the system is put. The problems to be overcome are difficult, but new and developing approaches will make a significant contribution. The approaches include: criteria to identify 'sensitivity' and 'importance', structures to organise information and electronic information resources to access data.The real challenge is to make the results of the various scientific initiatives relevant to and understandable by a wide range of customers with similar overlapping requirements, and thus make a genuine contribution to protecting the marine environment. Above and beyond that is the need for scientists to drive the agenda to enable real and lasting progress to be made towards ecosystem-based management of our seas and a proper consideration of what 'sustainability' may mean in the marine environment and how we utilise its resources. 相似文献
16.
Subgrid modeling of some type is typically used to account for heterogeneity at scales below the grid scale. The single-domain model (SDM), employing field-scale dispersion, and the dual-domain model (DDM), employing local hydrodynamic dispersion and exchange between domains having large hydraulic conductivity contrasts, are well-known examples. In this paper, the two modeling approaches are applied to tritium migration from the H-area seepage basins to a nearby stream--Fourmile Branch--at the Savannah River Site. This location has been monitored since 1955, so an extensive dataset exists for formulating realistic simulations and comparing the results to data. It is concluded that the main parameters of both models are scale-dependent, and methods are discussed for making initial estimates of the DDM parameters, which include mobile/immobile porosities and the mass exchange coefficient. Both models were calibrated to produce the best fit to recorded tritium data. When various attributes of the dataset were considered, including cumulative tritium activity discharged to Fourmile Branch, plume arrival time, and plume attenuation due to closure of the seepage basins in 1988, the DDM produced results superior to the SDM, while causing no unrealistic upgradient dispersion. A sensitivity analysis showed that only the DDM was able to accurately produce both the instantaneous activity discharge and cumulative activity with a single parameter set. This is thought to be due to the advection-dominated nature of transport in natural porous media and the more realistic treatment of this type of transport in the DDM relative to the SDM. 相似文献
17.
18.
Water introduced to surface drainages, such as agricultural and roadway runoff, mine drainage, or coalbed natural gas (CBNG)-produced water, potentially can be of environmental concern. In order to mitigate potential environmental effects, it may be important to be able to trace water discharged to the surface as it infiltrates and interacts with near-surface aquifers. We have chosen to study water withdrawn during CBNG production for isotope tracing in the hyporheic zone because it poses a variety of economic, environmental, and policy issues in the Rocky Mountain states. Ground water quality must be protected as CBNG water is added to semiarid ecosystems. Strontium (Sr) isotopes are effective fingerprints of the aquifer from which water originates. In this study, CBNG water was found to have a higher (87)Sr/(86)Sr ratio than the local alluvial aquifer water. This measurable difference allows the strontium isotope ratio and concentration to be used as tracers of CBNG water following its discharge to the surface. The dissolution and mobilization of salts from soil are an important contributor to ground water quality degradation. In the Powder River basin of Wyoming, the soils are calcium carbonate-buffered systems. The chemical similarity of strontium to calcium allows it to substitute into calcium minerals and enabled us to use strontium isotopes to identify calcium salts mobilized from the soil. Strontium isotopes are an effective monitor of the source of ions and the volume and direction of introduced water flow in the hyporheic zone. 相似文献
19.
20.
M. R. Allen N. P. Gillett J. A. Kettleborough G. Hegerl R. Schnur P. A. Stott G. Boer C. Covey T. L. Delworth G. S. Jones J. F. B. Mitchell T. P. Barnett 《Surveys in Geophysics》2006,27(5):491-544
We assess the extent to which observed large-scale changes in near-surface temperatures over the latter half of the twentieth century can be attributed to anthropogenic climate change as simulated by a range of climate models. The hypothesis that observed changes are entirely due to internal climate variability is rejected at a high confidence level independent of the climate model used to simulate either the anthropogenic signal or the internal variability. Where the relevant simulations are available, we also consider the alternative hypothesis that observed changes are due entirely to natural external influences, including solar variability and explosive volcanic activity. We allow for the possibility that feedback processes, other than those simulated by the models considered, may be amplifying the observed response to these natural influences by an unknown amount. Even allowing for this possibility, the hypothesis of no anthropogenic influence can be rejected at the 5% level in almost all cases. The influence of anthropogenic greenhouse gases emerges as a substantial contributor to recent observed climate change, with the estimated trend attributable to greenhouse forcing similar in magnitude to the total observed warming over the 20th century. Much greater uncertainty remains in the response to other external influences on climate, particularly the response to anthropogenic sulphate aerosols and to solar and volcanic forcing. Our results remain dependent on model-simulated signal patterns and internal variability, and would benefit considerably from a wider range of simulations, particularly of the responses to natural external forcing. 相似文献