首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Thermochemistry and melting properties of basalt   总被引：1，自引：0，他引：1  
The heat capacities of the liquid, glassy and crystalline phases of an alkali basalt have been determined from relative enthalpies measured between 400 and 1,800 K. Values given by available models of calculation generally agree to within 2% of these results. As derived from the new data and the enthalpy of vitrification measured at 973 K by oxide-melt drop solution calorimetry for the same sample, the enthalpy of fusion of this basalt increases from 15.4 kJ/mol at 1,000 K to 33.6 kJ/mol at 1,800 K. Comparisons between the enthalpies of fusion of basalt and model compositions confirm the small magnitude of the enthalpy of mixing between the molten mineral components of the liquids. Minor variations in the chemical composition have only a small effect in the heat capacity and the enthalpy of melting of basalt. The enthalpies of formation at 298 K from the oxides of the crystallized and glass phases of this alkali basalt are −112.2 and −98.5 kJ/mol, respectively, for a gram formula weight based on one mole of oxide components.  相似文献   

2.
Calorimetric measurements of fusion enthalpies for Ni2SiO4 and Co2SiO4 olivines were carried out using a high-temperature calorimeter, and Ni and Co partitioning between olivine and silicate liquid was analyzed using the measured heats of fusion. The fusion enthalpy of Co2SiO4 olivine measured by transposed-temperature drop calorimetry was 103 ± 15 kJ/mol at melting point (1688 K). The fusion enthalpy of Ni2SiO4 olivine was calculated based on the enthalpies of liquids in the system An50Di50-Ni2SiO4 measured by transposed-temperature drop calorimetry at 1773 K, and was 221 ± 26 kJ/mol at its metastable melting point (1923 K). The fusion enthalpy of Ni2SiO4 is the largest among those of olivine group, this is caused by the large crystal field stabilization energy of six-coordinated Ni2+ in olivine. The larger fusion enthalpy of Ni2SiO4 can account for the large and variable partition coefficient of Ni between olivine and silicate liquid. Based on the comparison between partition coefficients calculated from thermodynamic data and those observed in partition experiments, it is considered that the magnitude of partition coefficients is primarily dependent on the heats of fusion of the components. Furthermore, the activity coefficients for Ni-, Co- and Mn-bearing components in magmatic liquid are nearly of the same magnitude.  相似文献   

3.
The high-temperature enthalpies of liquid and glassy CaAl2Si2O8 were measured by drop calorimetry using a diphenyl ether drop calorimeter. These data are combined with published values of the high-temperature enthalpy of crystalline anorthite and the enthalpy of vitrification of anorthite to obtain the enthalpy of fusion of anorthite. Analysis of the data yields the following preferred values (enthalpy in kcal/mol, uncertainty limits correspond to two standard deviations):enthalpy of vitrification at 985 K, v H v 985=18.6±0.6; enthalpy of the liquid at 1,830 K, H 1830 l 300 g =130.4±1.2; enthalpy of the glass at 985 K, H 985 g -H 300 g =46.7±0.4; enthalpy of crystalline anorthite between 985 and 1,830 K, H 1830 c -H 985 c =69.9±1.4; calculated enthalpy of fusion of anorthite at 1,830 K, f H 1830= 32.4±2.1.The average heat capacity of supercooled liquid CaAl2Si2O8 between the glass transition (T g 1,086 K) and the melting point (T f7=1,830 K) is 102 ± 2 cal/mol/K. The large difference between the enthalpy of fusion and the enthalpy of vitrification for the minerals anorthite and diopside is emphasized. The practice of assuming fH vH should be discontinued for silicate compounds for which T f T g.  相似文献   

4.
The internal energies and entropies of 21 well-known minerals were calculated using the density functional theory (DFT), viz. kyanite, sillimanite, andalusite, albite, microcline, forsterite, fayalite, diopside, jadeite, hedenbergite, pyrope, grossular, talc, pyrophyllite, phlogopite, annite, muscovite, brucite, portlandite, tremolite, and CaTiO3–perovskite. These thermodynamic quantities were then transformed into standard enthalpies of formation from the elements and standard entropies enabling a direct comparison with tabulated values. The deviations from reference enthalpy and entropy values are in the order of several kJ/mol and several J/mol/K, respectively, from which the former is more relevant. In the case of phase transitions, the DFT-computed thermodynamic data of involved phases turned out to be accurate and using them in phase diagram calculations yields reasonable results. This is shown for the Al2SiO5 polymorphs. The DFT-based phase boundaries are comparable to those derived from internally consistent thermodynamic data sets. They even suggest an improvement, because they agree with petrological observations concerning the coexistence of kyanite?+?quartz?+?corundum in high-grade metamorphic rocks, which are not reproduced correctly using internally consistent data sets. The DFT-derived thermodynamic data are also accurate enough for computing the P–T positions of reactions that are characterized by relatively large reaction enthalpies (>?100 kJ/mol), i.e., dehydration reactions. For reactions with small reaction enthalpies (a few kJ/mol), the DFT errors are too large. They, however, are still far better than enthalpy and entropy values obtained from estimation methods.  相似文献   

5.
Enthalpies of solution in 2PbO· B2O3 at 712°C have been measured for glasses in the systems albite anorthite diopside, NaAlO2-SiO2, Ca0.5AlO2-SiO2 and albite-anorthite-quartz. The systems albite-anorthite and diopside-anorthite show substantial negative enthalpies of mixing, albite-diopside shows significant positive heats of mixing. For compositions up to NaAlO2 = 0.42 (which includes the subsystem albite-silica) the system NaAlO2-SiO2 shows essentially zero heats of mixing. A negative ternary excess heat of mixing is found in the plagioclase-rich portion of the albite-anorthite-diopside system. The join Si4O8-CaAl2Si2O8 shows small but significant heats of mixing. In albite-anorthite-quartz. ternary glasses, the ternary excess enthalpy of mixing is positive.Based on available heat capacity data and appropriate consideration of the glass transition, the enthalpy of the crystal-glass transition (vitrification) is a serious underestimate of the enthalpy of the crystal-liquid transition (fusion) especially when the melting point, Tf, is many hundreds of degrees higher than the glass transition temperature, Tg. On the other hand, the same heat capacity data suggest that the enthalpies of mixing in albite-anorthite-diopside liquids are calculated to be quite similar to those in the glasses. The enthalpies of mixing observed in general support the structural models proposed by Taylor and Brown (1979a, b) and others for the structure of aluminosilicate glasses.  相似文献   

6.
Enthalpies of mixing in glasses in the experimentally accessible region of the system Di-An-Fo are generally less than 4 kJ/mol in magnitude. Enthalpies of mixing of liquids in this and in several other petrologically relevant melts are also small; thus, if magmas of different compositions mix isothermally, the heat released or absorbed can be neglected in any consideration of the thermal evolution of the magmas, unless melting or crystallization takes place. The enthalpy of vitrification of Mg2SiO4 (to form a hypothetical glass at 700°C) is estimated to be 61±4 kJ/mol, in contrast to the enthalpy of fusion at 1500°C, 89±12 kJ/mol (Navrotsky et al. 1989). This suggests an average difference in heat capacity ( C p) between liquid and crystal of 35 J/K. mol, half that estimated by Ghiorso and Carmichael (1980, 1987).  相似文献   

7.
A study of Ca self-diffusion along the b axis in synthetic (iron free) diopside single crystal was performed at temperatures ranging from 1273 K to 1653 K. Diffusion profiles of 44Ca were measured using α-particles Rutherford Backscattering (α-RBS) micro analysis. We unambiguously find two distinct diffusional regimes, characterized by activation enthalpies H = 280 ± 26 kJ/mol and H = 951 ± 87 kJ/mol at temperatures lower and upper than 1515 K, respectively. This change of diffusion regime takes place near the onset of premelting as detected in calorimetric measurements and can be interpreted in terms of enhanced formation of Frenkel point defects with an activation enthalpy of formation of 1524 ± 266 kJ/mol (H f/2 = 762 kJ/mol), in accordance with our high-temperature diffusion data. If premelting of diopside is actually related to Ca-Frenkel point defect concentration, this concentration could reach up to few mole percents close to the melting temperature.  相似文献   

8.
The enthalpies of drop solution of calcite, magnesite, dolomite, wollastonite and diopside have been measured in a lead borate solvent at 977 K in a Calvettype microcalorimeter. The carbonate calorimetry was done under flowing gas atmosphere. Both natural and synthetic samples were used. From these calorimetric data, the enthalpies of several reactions of carbonate with quartz were calculated. The enthalpies of these reactions (kJ/mol) at 298 K are: calcite+quartzwollastonite+CO2, 92.3±1.0; magnesite+quartzenstatite+CO2, 82.9±2.8; dolomite+quartzdiopside+CO2, 163.0±1.9. These values generally are in agreement with those calculated from Robie et al., Helgeson et al., Berman and Holland and Powell. The enthalpy of dolomite-quartz reaction overlaps marginally with those from Berman and Holland and Powell. The enthalpy of formation of dolomite from magnesite and calcite (-11.1±2.5 kJ/mol) was also derived from the measured enthalpies, and this value is consistent with that from acid solution calorimetric measurements as shown by Navrotsky and Capobianco, but different from values in the earlier literature. These results support the premise that drop-solution of carbonates into molten lead borate results in a well-defined final state consisting of dissolved oxide and evolved CO2. This was also confirmed by weight change experiments. Thus, oxide melt calorimetry is applicable to carbonates.  相似文献   

9.
The standard enthalpy of formation of thorite and huttonite and the enthalpy of the phase transition between these polymorphs were determined using high-temperature oxide melt solution calorimetry and transposed temperature drop calorimetry. Standard enthalpies of formation of thorite and huttonite are reported for the first time and are −2117.6 ± 4.2 kJ/mol and −2110.9 ± 4.7 kJ/mol, respectively. Based on our measurements, thorite and huttonite are metastable relative to SiO2 (quartz) and ThO2 (thorianite) at standard conditions, but are presumably stabilized at high temperature by the entropy contribution. Based on the measured enthalpy of the thorite-huttonite phase transition of 6.7 ± 2.5 kJ/mol, a dP/dT slope for the transformation was calculated as −1.21 ± 0.45 MPa/K.  相似文献   

10.
The maximum limits of the assemblage albiteforsterite have been determined experimentally at high pressures and temperatures. At subsolidus temperatures, albite plus forsterite is replaced at high pressures by jadeitic clinopyroxene and enstatitic orthopyroxene. The boundary for this reaction lies within experimental uncertainity of that for jadeite=albite+nepheline. Melting of albite+forsterite at high pressures produces enstatite+liquid, which is different from the low-pressure eutectic behavior. Melting rates are very slow and several hundred hours are required to establish equilibrium near the solidus. The subsolidus boundary for albite plus forsterite lies near that for sanidine plus forsterite, but with a shallower slope which more closely matches that of anorthite plus forsterite. Both albite plus forsterite and anorthite plus forsterite are replaced at high pressures by an assemblage containing clinopyroxene plus orthopyroxene, unlike sanidine plus forsterite, which is replaced by a feldspathoid plus orthopyroxene. The presence of sodium enlarges the depth region over which plagioclase lherzolite can stably exist; it may also stabilize alkali feldspar plus olivine in crustal rocks.  相似文献   

11.
We report relative enthalpy measurements on quartz, cristobalite and amorphous SiO2 between 1000 and 1800 K. We have observed a glass transition around 1480 K for amorphous SiO2. From our results and available Cp, relative enthalpy, and enthalpy of solution data we have derived a consistent set of thermodynamic data for these phases. Our calculated enthalpies of fusion are 8.9 ± 1.0 kJ mole?1 for cristobalite at 1999 K and 9.4 ± 1.0 kJ mole?1 at 1700 K for quartz.  相似文献   

12.
The thermodynamic properties of carnegieite and NaAlSiO4 glass and liquid have been investigated through C p determinations from 10 to 1800 K and solution-calorimetry measurements. The relative entropies S 298-S0 of carnegieite and NaAlSiO4 glass are 118.7 and 124.8 J/mol K, respectively. The low-high carnegieite transition has been observed at 966 K with an enthalpy of transition of 8.1±0.3 kJ/mol, and the enthalpy of fusion of carnegieite at the congruent melting point of 1799 K is 21.7±3 kJ/mol. These results are consistent with the reported temperature of the nepheline-carnegieite transition and available thermodynamic data for nepheline. The entropy of quenched NaAlSiO4 glass at 0 K is 9.7±2 J/mol K and indicates considerable ordering among AlO4 and SiO4 tetrahedra. In the liquid state, progressive, temperature-induced Si, Al disordering could account for the high configurational heat capacity. Finally, the differences between the entropies and heat capacities of nepheline and carnegieite do not seem to conform to current polyhedral modeling of these properties  相似文献   

13.
In the system CaO-MgO-Al2O3-SiO2, the tetrahedron CaMgSi2O6(di)-Mg2SiO4(fo)-SiO2-CaAl2 SiO6(CaTs) forms a simplified basalt tetrahedron, and within this tetrahedron, the plane di-fo-CaAl2Si2O8(an) separates simplified tholeiitic from alkalic basalts. Liquidus phase relations on this join have been studied at 1 atm and at 7, 10, 15, and 20 kbar. The temperature maximum on the 1 atm isobaric quaternary univariant line along which forsterite, diopside, anorthite, and liquid are in equilibrium lies to the SiO2-rich side of the join di-fo-an. The isobaric quaternary invariant point at which forsterite, diopside, anorthite, spinel, and liquid are in equilibrium passes, with increasing pressure, from the silica-poor to the silica-rich side of the join di-fo-an, which causes the piercing points on this join to change from forsterite+diopside+anorthite+liquid and forsterite +spinel+anorthite+liquid below 5 kbar to forsterite +diopside+spinel+liquid and diopside +spinel+anorthite+liquid above 5 kbar. As pressure increases, the forsterite and anorthite fields contract and the diopside and corundum fields expand. The anorthite primary phase field disappears entirely from the join di-fo-an between 15 and 20 kbar. Below about 4 kbar, the join di-fo-an represents, in simplified form, a thermal divide between alkalic and tholeiitic basalts. From about 4 to at least 12 kbar, alkalic basalts can produce tholeiitic basalts by fractional crystallization, and at pressures above about 12 kbar, it is possible for alkalic basalt to be produced from oceanite by crystallization of both olivine and orthopyroxene. If alkalic basalts are primary melts from a lherzolite mantle, they must be produced at high pressures, probably greater than about 12 kbar.Department of Geosciences, University of Texas at Dallas Contribution No. 327. Hawaii Institute of Geophysics Contribution No. 814.  相似文献   

14.
29Si MAS NMR experiments have been carried out to determine the silica species distribution (Q distribution) in albite, NaAlSi3O8, and anorthite, CaAl2Si2O8, composition glasses (designated albite and anorthite glass). Our results indicate that the Q distribution of albite glass contains all five possible silica species and shows a tendency towards high Q3 and Q4 concentrations, whereas anorthite glass does not contain Q4 and has a high Q0 concentration. Rationalizations are made in terms of the observed Q distributions to explain differences in devitrification behavior of these two glasses. 27Al MAS NMR data for these glasses suggest that differences in devitrification behavior between these two glasses should be ascribed to small growth rates rather than small nucleation rates of crystalline albite from albite glass.  相似文献   

15.
  相似文献   

16.
The activity of a given mineral component in a silicate melt can be calculated from the compositions of coexisting melt and crystals, provided that 1) the component is an independently variable component of the crystal, and 2) appropriate thermodynamic data for the component are known. This approach is used to calibrate the compositional dependence of the activities of forsterite, fayalite, anorthite, and albite from experimental data on natural mafic-to-intermediate melts. The natural logarithms of the activities of forsterite and anorthite can be closely approximated as second-degree polynomial functions of the melt composition (r 2=0.99 and 0.97, respectively); corresponding fits for fayalite and albite are significantly poorer (r 2=0.81 and 0.87, respectively). The shapes of the fitted activity surfaces yield information about speciation in silicate melts. The activity models for forsterite and anorthite provide excellent geothermometers with standard deviations of temperature residuals of approximately 10° C. These geothermometers, when combined with the activity models for fayalite and albite, can be used to predict the temperature at which olivine or plagioclase will crystallize from a melt, along with the composition of the crystals.  相似文献   

17.
Heat-capacity measurements have been made between 8 and 370 K on an annealed and a rapidly quenched diopside glass. Between 15 and 200 K, Cp does not depend significantly on the thermal history of the glass. Below 15 K Cp is larger for the quenched than for the annealed specimen. The opposite is true above 200 K as a result of what is interpreted as a secondary relaxation around room temperature. The magnitude of these effects, however, is small enough that the relative entropies S(298)−S(0) of the glasses differ by only 0.5 J/mol K, i.e., a figure within the combined experimental uncertainties. The insensitivity of relative entropies to thermal history supports the assumption that the configurational heat capacity of the liquid may be taken as the heat capacity difference between the liquid and the glass (ΔCp). Furthermore, this insensitivity allows calculation of the residual entropies at 0 K of diopside glasses as a function of the fictive temperature from the entropy of fusion of diopside and the heat capacities of the crystalline, glassy and liquid phases. For a glass with a fictive temperature of 1005 K, for example, this calorimetric residual entropy is 24.3 ± 3 J/mol K, in agreement with the prediction made by RICHET (1984) from an analysis of the viscosity data with the configurational-entropy theory of relaxation processes of Adam and Gibbs (1965). In turn, all the viscosity measurements for liquid diopside, which span the range 0.5-4· 1013 poise, can be quantitatively reproduced through this theory with the calorimetrically determined entropies and ΔCp data. Finally, the unclear significance of “activation energies” for structural interpretations of viscosity data is emphasized, and the importance of ΔCp and glass-transition temperature systematics for determining the composition and temperature dependences of the viscosity is pointed out.  相似文献   

18.
Enthalpies of dissolution in HF solutions have been measured at 323 K for a series of hydrous trachyte glasses. Enthalpies of mixing between water and molten trachyte have then been calculated from heat capacity data for the same set of samples and available enthalpy for pure water. The moderately negative enthalpies of mixing suggested at 1 bar by the measurements made on glasses almost disappear when trachyte liquids and water are referred to the same temperature, and particularly so when enthalpies of mixing are calculated for a few kbars pressure. As found for albite and phonolite liquids, trachyte melts thus appear to mix nearly ideally as far as enthalpy is concerned. These results imply that the enthalpy of exsolution of water from magmas is very small or negligible under the P-T-X conditions relevant to trachytic volcanism, even for complete degassing of up to 5 wt% H2O. Furthermore, the viscosity increase associated with exsolution-driven cooling is negligible compared to the decrease caused directly by water exsolution.  相似文献   

19.
Raman microprobe spectra were made on three post shock, diaplectic plagioclase feldspars. Optical and X-ray diffraction studies indicated that feldspars maintained a partially or totally crystalline state after having passed through the mixed phase zone of Hugoniot response to shock waves (15–38 GPa). The appearance of uniquely glass-type spectra occurs at different shock pressures for each specimen according to its atomic structural arrangement, below 38 GPa for mosaic structured labradorite, near 40 GPa for anorthite and above 50 GPa for the highly ordered low albite. The diaplectic anorthite and labradorite glasses give spectra which indicate the presence of two glass types. Shifts in the band envelope frequencies compared to spectra of fused glass and statically pressure densified glass suggest that these glasses have specific structural arrangements. These differences suggest that the shock and fusion glass-forming processes are not exactly identical. The results from material shocked in the mixed phase region of Hugoniot response show that the phase transitions are effected at different pressures depending upon the feldspar structural type.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号