共查询到19条相似文献，搜索用时 250 毫秒
1.
川南普格杏仁状玄武岩气孔中产出硅铁灰石、绿泥石、石英、方解石、沥青等5种不同成分类型的杏仁体。硅铁灰石杏仁体呈圆形或椭圆形,其直径多为5～8 mm,由杏仁体壁至中心,依次分别产出石英→铁镁绿泥石→硅铁灰石。硅铁灰石晶体呈铁黑色、薄板状,由5个平行双面单形组成。微区X射线衍射分析结果显示,硅铁灰石属三斜晶系,空间群为P1 。化学成分分析表明,硅铁灰石氧化物含量(ωB/%)为SiO2 53.55%、CaO 18.84%、Fe2O3 13.65%、FeO 9.68%、MgO 1.44%、H2O+1.74%,FeO/Fe2O3=0.71;铁镁绿泥石氧化物含量(ωB/%)为SiO2 33.17%、Al2O3 13.03%、Fe2O3 8.45%、FeO 13.06%、MgO 18.82%、H2O+12.12%、CaO 0.87%,FeO/Fe2O3=1.55。硅铁灰石杏仁体的矿物组合变化表明,玄武岩晚期的成矿热液由富Mg、Fe向富Si、Ca演化,硅铁灰石是由偏酸性、弱还原环境向偏碱性、弱氧化环境转化时所形成的过渡性产物。 相似文献
2.
采用常规宝石学仪器并结合电子探针、电子顺磁共振谱及紫外-可见光谱等测试方法,对软玉中不同深浅的黄玉与糖玉样品进行了系统分析,以探讨其致色原因及其差异。分析结果表明,黄玉的致色原因主要为O2-→Fe3+的电荷转移跃迁及Fe3+的6A1→4T2（D）跃迁,糖玉则主要由Fe3+的6A1→4E （D）、6A1→4T2（D）谱项跃迁与Mn3+的Jahn-Teller效应致色。黄玉中O2-→Fe3+的电荷转移跃迁导致可见光区的412~500 nm处吸收,是形成与控制黄玉颜色的重要因素;而糖玉因含有Mn3+致使黄绿色光被吸收而显示出黄绿色的补色。此外,Fe2+—Fe3+的荷移与Fe2+（5T2）+Fe3+（6A1）→Fe2+（5E）+Fe3+（6A1）跃迁也对糖玉和黄玉的致色具有贡献。 相似文献
3.
较低稀释比熔片制样X射线荧光光谱法测定磷矿石中12种主次痕量组分 总被引：4，自引：4，他引：0
当前应用X射线荧光光谱熔片制样技术分析测定较低含量、低荧光产额氟组分时,准确度较低,精密度较差、检出限较高。本文运用5:1较低稀释比熔样制片技术,采用波长色散X射线荧光光谱法测定磷矿石中12个主次量组分(F、Na2O、MgO、Al2O3、SiO2、P2O5、K2O、CaO、TiO2、MnO、TFe2O3和痕量SrO)。采用磷矿石、岩石国家一级标准物质、磷矿石管理样品和人工配制标准样品校准,经验系数法进行基体校正,结果表明12个组分分析方法的精密度和准确度较好,检出限较低,未知样品的分析结果比较满意;氟的精密度、准确度和检出限均好于文献中10:1熔样稀释比得出的结果。该方法解决了压片制样测定氟组分,熔片制样测定其他主次量组分的技术问题,同时也降低了熔片制样技术测定氟的检出限。 相似文献
4.
[摘要]桂西靖西念寅铝土矿不整合于早二叠茅口灰岩之上,分析其稀土元素地球化学特征对研究其物质来源具有重要意义。对念寅原生铝土矿、堆积型铝土矿及其围岩的11个样品进行稀土元素含量测试,并同靖西、平果等地各类铝土矿、茅口灰岩等样品对比分析,结果表明: （1）念寅铝土矿主量元素主要SiO2、Fe2O3、Al2O3、TiO2组成,Al2O3与Fe2O3和SiO2呈负相关;（2）念寅铝土矿球粒陨石标准化曲线与茅口灰岩配分曲线趋势一致,具有ΣREE富集、LREE与HREE分异且LREE相对富集、Eu负异常等显著特征;（3）念寅铝土矿显示出被动大陆边缘地带海相沉积的典型特征,原生铝土矿成矿物质来源主要为下伏的茅口灰岩。 相似文献
5.
铜厂沟斑岩型铜钼矿是格咱岛弧燕山晚期Mo多金属成矿作用的典型代表,矿床中与Cu-Mo矿化相关的蚀变作用广泛发育。文章在对该矿床岩相学研究的基础上,选择TiO2作为蚀变过程中惰性组分、运用Gresens方程对元素迁移进行定量分析。主量元素迁移特征显示在钾硅酸盐化蚀变阶段和石英—绢云母化蚀变阶段中Al2O3、K2O、Na2O、P2O5、SiO2持续迁入,青磐岩化阶段Fe2O3、MgO、CaO迁入富集;微量元素在钾硅酸盐化阶段显示为Mo、Ba、W、Ra、Nb、Ta、LREE元素明显迁入,且Ba、W与Mo的富集有明显的相关性,石英—绢云母化蚀变阶段Pb、Zn富集成矿,青磐岩化阶段Cu富集成矿,铜厂沟斑岩型铜钼矿矿化蚀变与成矿元素迁移特征研究对该区深部地球化学勘查指标制定、成矿信息及矿体边界确定等具有重要的参考意义。 相似文献
6.
7.
周口店地区的古环境变化研究多数研究集中在中更新世时期,而缺乏对早更新世时期环境变化的研究。这主要是由于缺少保存完好的早更新世沉积记录造成的。随着对20世纪80年代在周口地区发现的东洞剖面,发现这是一个保存完好的早更新世剖面,为研究早更新世时期的古环境变化特征提供了良好的研究材料。为了重建早更新世时期的古环境变化特征,利用XRF对东洞洞穴沉积物的主要元素（SiO2,Al2O3,Fe2O3和CaO）的化学组成进行了高分辨率分析,同时对沉积物中的FeO含量进行了测试。结果显示东洞剖面沉积物的主要化学组成为SiO2,占41.6%～58.9%,其次是Al2O3和Fe2O3,其含量的变化范围分别为13.69%～29.63%和5.00%～9.81%。Al2O3和Fe2O3在剖面上与SiO2含量成明显的镜像变化关系,显示出Al2O3和Fe2O3对沉积物中SiO2含量的稀释作用。另外,Fe2O3与Al2O3在剖面上具有很好的相关性,表明Fe2O3主要富集在富铝的矿物中。从元素含量在剖面的上分布看,东洞剖面的化学组成发生3次大的波动,主要表现为SiO2和FeO含量增高,而Fe2O3与Al2O3含量的减少。这3次波动分别出现在剖面的15.3～14.6m,11.0～9.9m和8.40～7.84m深度处。在3次化学组成的波动出现的同时,指示沉积物风化程度和温度变化的Si/Al（SiO2/Al2O3）和FeO/Fe2O3比值也发生了明显变化,比值增高,指示了3次大的干冷事件。另外,在剖面上部（10.00～7.84m,即第2次事件以后）SiO2/Al2O3和FeO/Fe2O3比值变高且波动频繁,表明自第2次干冷事件后沉积区的环境变得不稳定,逐渐向冷干气候转变。东洞剖面的地球化学记录（SiO2/Al2O3和FeO/Fe2O3）与泾川黄土剖面的粒度曲线具有较好的对比性,支持了东洞剖面记录的环境信息与黄土沉积记录的环境变化具有一致性。通过与泾川粒度曲线的对比发现,东洞剖面记录的3次干冷事件在时段上分别对应于黄土-古土壤序列中的L26,L15和L13。 相似文献
8.
苏北盆地是一个以箕状断陷为特点的复合型沉积盆地。文章根据2004年夏采集的苏北盆地宝应钻孔(BY1)97m沉积物的124个样品11种常量元素SiO2,Al2O3,TiO2,Fe2O3,MgO,MnO,CaO,K2O,Na2O,P2O5和SO2的地球化学特征分析,探讨了海相沉积环境与陆相沉积环境的元素分布特点、成因、相互之间的联系和物质来源。根据沉积物常量元素含量的垂向变化,结合沉积相、岩性特征、有孔虫分析、古地磁及14 C定年,分析了苏北盆地2.58Ma以来不同阶段海陆交互作用下的常量元素变化特点,反映了苏北平原在第四纪曾经历了4次海水淹覆, 海-陆交互堆积作用明显, 经滨浅海→泻湖→湖泊→洼地,最后由河流冲积物覆盖成陆。 相似文献
9.
10.
采用电子探针分析、能量色散X射线荧光光谱、傅里叶变换红外光谱、紫外-可见光谱和色度学方法等多种手段,对55个缅甸紫色翡翠样品进行了全面分析。结果表明,缅甸紫色翡翠的主要化学成分为SiO2、Al2O3和Na2O,含量与标准硬玉接近。色度学测试分析显示,缅甸紫色翡翠的彩度C*主要受色度值a*控制,而色调角h°主要由色度值b*控制。缅甸紫色翡翠可分为两种类型:Ⅰ型紫色翡翠主要由Mn3+致色,并在紫外-可见-近红外光谱570 nm显示主要吸收带;Ⅱ型紫色翡翠由于Fe2+-Ti4+之间的电荷转移致色,在光谱540 nm和610 nm显示吸收。两种翡翠中均存在Fe3+的吸收峰,样品中的全铁含量决定其色调角及明度。 相似文献
11.
Alexander Borisov Harald Behrens Francois Holtz 《Contributions to Mineralogy and Petrology》2013,166(6):1577-1591
The effect of TiO2 and P2O5 on the ferric/ferrous ratio in silicate melts was investigated in model silicate melts at air conditions in the temperature range 1,400–1,550 °C at 1-atm total pressure. The base composition of the anorthite–diopside eutectic composition was modified with 10 wt % Fe2O3 and variable amounts of TiO2 (up to 30 wt %) or P2O5 (up to 20 wt %). Some compositions also contained higher SiO2 concentrations to compare the role of SiO2, TiO2, and P2O5 on the Fe3+/Fe2+ ratio. The ferric/ferrous ratio in experimental glasses was analyzed using a wet chemical technique with colorimetric detection of ferrous iron. It is shown that at constant temperature, an increase in SiO2, TiO2, and P2O5 content results in a decrease in the ferric/ferrous ratio. The effects of TiO2 and SiO2 on the Fe3+/Fe2+ ratio was found to be almost identical. In contrast, adding P2O5 was found to decrease ferric/ferrous ratio much more effectively than adding silica. The results were compared with the predictions from the published empirical equations forecasting Fe3+/Fe2+ ratio. It was demonstrated that the effects of TiO2 are minor but that the effects of P2O5 should be included in models to better describe ferric/ferrous ratio in phosphorus-bearing silicate melts. Based on our observations, the determination of the prevailing fO2 in magmas from the Fe3+/Fe2+ ratio in natural glasses using empirical equations published so far is discussed critically. 相似文献
12.
Phase equilibria data in the systems SiO2-P2O5, P2O5-MxOy, and P2O5-MxOy-SiO2 are employed in conjunction with Chromatographic and spectral data to investigate the role of P2O5 in silicate melts. Such data indicate that the behavior of P2O5 is complex. P2O5 depolymerizes pure SiO2 melts by entering the network as a four-fold coordinated cation, but polymerizes melts in which an additional metal cation other than silicon is present. The effect of this polymerization is apparent in the widening of the granite-ferrobasalt two-liquid solvus. In this complex system P2O5 acts to increase phase separation by further enrichment of the high charge density cations Ti, Fe, Mg, Mn, Ca, in the ferrobasaltic liquid. P2O5 also produces an increase in the ferrobasalt-granite REE liquid distribution coefficients. These distribution coefficients are close to 4 in P2O5-free melts, but close to 15 in P2O5-bearing melts.The dual behavior of P2O5 is explained in a model which requires complexing of phosphate anions (analogous to silicate anions) and metal cations in the melt. This interaction destroys Si-O-M-O-Si bonds polymerizing the melt. The higher concentration of Si-O-M-O-Si bond complexes in immiscible ferrobasaltic liquids relative to their conjugate immiscible granite liquids explains the partitioning of P2O5 into the ferrobasaltic liquid. 相似文献
13.
Biotite dissolution experiments were carried out to better understand the dissolution kinetics and Fe behavior under low O2 conditions, and to give an insight into the Precambrian weathering. Mineral dissolution with a continuous flow-through reactor was employed at 25 °C for up to 65 days varying partial pressure of atmospheric oxygen (PO2), pH (6.86 and 3.01) and Fe content in mineral (1.06 and 0.11 mol of Fe per O10(OH,F)2 for biotite and phlogopite, respectively) independently for the examination of their effects on biotite dissolution. Low PO2 conditions were achieved in a newly developed glove box (PO2 ? 6 × 10−4 atm; referred to as anoxic conditions), which was compared to the present, ambient air conditions (0.2 atm of PO2; oxic conditions). The biotite dissolution rate was slightly faster under anoxic conditions at pH 6.86 while it was not affected by PO2 at pH 3.01. There was no direct effect of Fe content on dissolution rate at pH 6.86 while there was a small difference in dissolution rate between biotite and phlogopite at pH 3.01. The 1.5 order-of-magnitude faster release rate of Fe under anoxic conditions for biotite dissolution at pH 6.86 resulted from the difference in ratio of Fe3+ precipitates remaining in the reactor to Fe dissolved (about 60% and 100% under anoxic and oxic conditions, respectively), which is caused mainly by the difference in PO2. The results infer that the Fe2+ and Fe3+ contents in the Paleoproterozoic paleosols, fossil weathering profiles, are reflected by atmospheric oxygen levels at the time of weathering. 相似文献
14.
The ~2,752-Ma Weld Range greenstone belt in the Yilgarn Craton of Western Australia hosts several Fe ore deposits that provide insights into the role of early hypogene fluids in the formation of high-grade (>55 wt% Fe) magnetite-rich ore in banded iron formation (BIF). The 1.5-km-long Beebyn orebody comprises a series of steeply dipping, discontinuous, <50-m-thick lenses of magnetite–(martite)-rich ore zones in BIF that extend from surface to vertical depths of at least 250 m. The ore zones are enveloped by a 3-km-long, 150-m-wide outer halo of hypogene siderite and ferroan dolomite in BIF and mafic igneous country rocks. Ferroan chlorite characterises 20-m-wide proximal alteration zones in mafic country rocks. The magnetite-rich Beebyn orebody is primarily the product of hypogene fluids that circulated through reverse shear zones during the formation of an Archean isoclinal fold-and-thrust belt. Two discrete stages of hypogene fluid flow caused the pseudomorphic replacement of silica-rich bands in BIF by Stage 1 siderite and magnetite and later by Stage 2 ferroan dolomite. The resulting carbonate-altered BIF is markedly depleted in SiO2 and enriched in CaO, MgO, LOI, P2O5 and Fe2O3(total) compared with the least-altered BIF. Subsequent reactivation of these shear zones and circulation of hypogene fluids resulted in the leaching of existing hypogene carbonate minerals and the concentration of residual magnetite-rich bands. These Stage 3 magnetite-rich ore zones are depleted in SiO2 and enriched in K2O, CaO, MgO, P2O5 and Fe2O3(total) relative to the least-altered BIF. Proximal wall rock hypogene alteration zones in mafic igneous country rocks (up to 20 m from the BIF contact) are depleted in SiO2, CaO, Na2O, and K2O and are enriched in Fe2O3(total), MgO and P2O5 compared with distal zones. Recent supergene alteration affects all rocks within about 100 m below the present surface, disturbing hypogene mineral and the geochemical zonation patterns associated with magnetite-rich ore zones. The key vectors for identifying hypogene magnetite-rich Fe ore in weathered outcrop include textural changes in BIF (from thickly to thinly banded), crenulated bands and collapse breccias that indicate volume reduction. Useful indicators of hypogene ore in less weathered rocks include an outer carbonate–magnetite alteration halo in BIF and ferroan chlorite in mafic country rocks. 相似文献
15.
The evolution of a carbonated nephelinitic magma can be followed by the study of a statistically significant number of melt inclusions, entrapped in co-precipitated perovskite, nepheline and magnetite in a clinopyroxene- and nepheline-rich rock (afrikandite) from Kerimasi volcano (Tanzania). Temperatures are estimated to be 1,100°C for the early stage of the melt evolution of the magma, which formed the rock. During evolution, the magma became enriched in CaO, depleted in SiO2 and Al2O3, resulting in immiscibility at ~1,050°C and crustal pressures (0.5–1 GPa) with the formation of three fluid-saturated melts: an alkali- and MgO-bearing, CaO- and FeO-rich silicate melt; an alkali- and F-bearing, CaO- and P2O5-rich carbonate melt; and a Cu–Fe sulfide melt. The sulfide and the carbonate melt could be physically separated from their silicate parent and form a Cu–Fe–S ore and a carbonatite rock. The separated carbonate melt could initially crystallize calciocarbonatite and ultimately become alkali rich in composition and similar to natrocarbonatite, demonstrating an evolution from nephelinite to natrocarbonatite through Ca-rich carbonatite magma. The distribution of major elements between perovskite-hosted coexisting immiscible silicate and carbonate melts shows strong partitioning of Ca, P and F relative to FeT, Si, Al, Mn, Ti and Mg in the carbonate melt, suggesting that immiscibility occurred at crustal pressures and plays a significant role in explaining the dominance of calciocarbonatites (sövites) relative to dolomitic or sideritic carbonatites. Our data suggest that Cu–Fe–S compositions are characteristic of immiscible sulfide melts originating from the parental silicate melts of alkaline silicate–carbonatite complexes. 相似文献
16.
Experiments at high pressures and temperatures were carried out (1) to investigate the crystal-chemical behaviour of Fe4O5–Mg2Fe2O5 solid solutions and (2) to explore the phase relations involving (Mg,Fe)2Fe2O5 (denoted as O5-phase) and Mg–Fe silicates. Multi-anvil experiments were performed at 11–20 GPa and 1100–1600 °C using different starting compositions including two that were Si-bearing. In Si-free experiments the O5-phase coexists with Fe2O3, hp-(Mg,Fe)Fe2O4, (Mg,Fe)3Fe4O9 or an unquenchable phase of different stoichiometry. Si-bearing experiments yielded phase assemblages consisting of the O5-phase together with olivine, wadsleyite or ringwoodite, majoritic garnet or Fe3+-bearing phase B. However, (Mg,Fe)2Fe2O5 does not incorporate Si. Electron microprobe analyses revealed that phase B incorporates significant amounts of Fe2+ and Fe3+ (at least ~?1.0 cations Fe per formula unit). Fe-L2,3-edge energy-loss near-edge structure spectra confirm the presence of ferric iron [Fe3+/Fetot?=?~?0.41(4)] and indicate substitution according to the following charge-balanced exchange: [4]Si4+?+?[6]Mg2+?=?2Fe3+. The ability to accommodate Fe2+ and Fe3+ makes this potential “water-storing” mineral interesting since such substitutions should enlarge its stability field. The thermodynamic properties of Mg2Fe2O5 have been refined, yielding H°1bar,298?=???1981.5 kJ mol??1. Solid solution is complete across the Fe4O5–Mg2Fe2O5 binary. Molar volume decreases essentially linearly with increasing Mg content, consistent with ideal mixing behaviour. The partitioning of Mg and Fe2+ with silicates indicates that (Mg,Fe)2Fe2O5 has a strong preference for Fe2+. Modelling of partitioning with olivine is consistent with the O5-phase exhibiting ideal mixing behaviour. Mg–Fe2+ partitioning between (Mg,Fe)2Fe2O5 and ringwoodite or wadsleyite is influenced by the presence of Fe3+ and OH incorporation in the silicate phases. 相似文献
17.
A. B. Woodland K. Schollenbruch M. Koch T. Boffa Ballaran R. J. Angel D. J. Frost 《Contributions to Mineralogy and Petrology》2013,166(6):1677-1686
Experiments at high pressures and temperatures reveal the stability of a Fe4O5-type structured phase in several simple chemical systems. On the one hand, the Fe4O5 end-member is stable in the presence of SiO2-rich phases, including stishovite, but contains ≤0.01 Si cations per formula unit. This indicates that Si is essentially excluded from this phase. On the other hand, the Fe4O5 phase can form solid solutions with Mg and Cr and can coexist with silicate phases at the high P–T conditions expected in the transition zone of the mantle (i.e. >~9 GPa). It can coexist with both wadsleyite and Mg-rich ringwoodite and can contain at least 25 mol% Mg2Fe2O5 component. The Fe4O5 phase always contains the least amount of Mg in any given mineral assemblage. Cr-bearing Fe4O5 has been synthesised with up to 46 mol% Fe2Cr2O5 component and can coexist with spinel and/or hematite-eskolatite solid solutions. Substitution of Mg and Cr for Fe2+ and Fe3+, respectively, leads to variations in Fe3+/∑Fe from the ideal value of 0.5 for the Fe4O5 end-member composition, which can influence its redox stability. These cations also have contrasting effects on the unit-cell parameters, which indicate that they substitute into different sites. This initial study suggests that Fe4O5-type structured phases may be stable over a range of P–T–fO2 conditions and bulk compositions, and can be important in understanding the post-spinel phase relations in a number of chemical systems relevant to the Earth’s transition zone. Thus, the presence of even small amounts of Fe3+ could alter the expected phase relations in peridotitic bulk compositions by stabilising this additional phase. 相似文献
18.
Fabrice Gaillard Michel Pichavant Bruno Scaillet 《Geochimica et cosmochimica acta》2003,67(22):4389-4409
The critical role of iron on crystal-silicate liquid relationships and melt differentiation is mainly controlled by the redox conditions prevailing in magmas, but the presently available database merely constrains the thermodynamic properties of iron-bearing components in strongly reduced and anhydrous molten silicate where iron is in the ferrous form. This paper provides new standard states for pure ferrous (FeOliq) and ferric (Fe2O3liq) molten iron oxides and extends the experimental database towards oxidizing and water-bearing domains. Iron-iridium, iron-platinum alloys, magnetite or hematite were equilibrated with synthetic silicic liquids at high temperature and high pressure under controlled oxygen fugacity (fO2) to determine activity-composition relationships for FeOliq and Fe2O3liq. Between 1000 and 1300°C, the fO2 ranges from that in air to 3-log units below that of the nickel-nickel oxide buffer (NNO). Experiments were performed on both anhydrous and hydrous melts containing up to 6-wt.% water. Incorporation of water under reducing conditions increases the activity coefficient of FeOliq but has an opposite effect on Fe2O3liq. As calcium is added to system, the effect of water becomes weaker and is inverted for Fe2O3liq. Under oxidizing conditions, water has a negligible effect on both activities of FeOliq and Fe2O3liq. In contrast, changes in redox conditions dominate the activity coefficients of both FeOliq and Fe2O3liq, which increase significantly with increasing fO2. The present results combined with the previous work provide a specific database on the energetics of iron in silicate melts that cover most of the condition prevailing in natural magmas. 相似文献
19.
Fe~(2+)活化过硫酸盐在石油污染土壤中修复实验研究 总被引：1，自引：0，他引：1
硫酸根自由基的高级氧化技术以高效率、污染少等优点被广泛用于环境污染治理。本文以实际石油污染土壤为对象,运用该体系对土壤进行修复研究,分别从Na_2S_2O_8/Fe~(2+)摩尔比、体系pH值、Na_2S_2O_8/Fe~(2+)投加量等方面开展了实验研究。实验表明:当Na_2S_2O_8/Fe2+摩尔比为2∶3时,石油污染物的降解效果最好,体系的pH值对降解效果影响不大,1 g土壤中浓度为0.1 mol/L的过硫酸钠和硫酸亚铁溶液的最佳加入量为2 m L、3 m L时,对土壤的降解效果最为明显,故每吨污染土壤的添加量大约为2×10~6m L、3×10~6m L。 相似文献