共查询到20条相似文献，搜索用时 31 毫秒
1.
Enzo Mantovani 《Geophysical Journal International》1978,53(1):55-60
Summary. Earlier efforts to generate the entire theoretical seismograms, including both body and surface waves for realistic sources buried in a radially heterogeneous anelastic, spherical earth, are extended to include the summation of 16 modes. The comparison between a real seismogram and theoretical time series, relative to different attenuation models in the upper mantle, yields information concerning the anelasticity under the Pacific Ocean. 相似文献
2.
Summary. We report the initial results of our attempts to obtain theoretical seismograms for direct comparison with the experimental time series obtained with the long-period instruments of the WWSSN. The entire theoretical seismogram, including both body waves and surface waves, can be generated for a spherical, anelastic earth by simple inverse Fourier transformation of the sum of the propagating fundamental and higher-mode surface waves. The key to success in reproducing the WWSSN records involves the number of modes, and the minimum period used in these computations; here we use eight modes and a minimum period of 2 s. Efficient computational algorithms make it possible to handle up to 2000 frequency points for each mode; approximately 200 layers are used to model the radial heterogeneity of the earth; attenuation is treated exactly. Examples are given of the SH theoretical seismograms resulting from dislocation sources buried at various depths in the Earth. 相似文献
3.
A. J. Harding 《Geophysical Journal International》1985,80(2):463-492
Summary. The transformation of a set of seismograms to the delay time-slowness, τ—p, domain is presented as a sequence of Fourier and Bessel transforms, For a horizontally layered medium, this sequence gives an exact cylindrical wave decomposition of the response to a point source; correctly compensating for the phase shifting and geometrical spreading associated with transmission through the Earth. The resultant τ—p map or 'slant stack' contains true amplitude and phase information. The spatial aliasing properties of the transformation, when applied to a dataset, are greatly improved by the use of only outgoing waves in the Bessel transform. This is equivalent to using Hankel functions rather than Bessel functions, and is justified by the absence of incoming waves from most datasets. The WKBJ approximation to the medium response enables predictions to be made about the shape and amplitude variation with slowness of truncation effects. Theoretically the τ—p transformation is reversible, thus the τ—p domain is a suitable one in which to perform filtering operations before seismogram reconstruction. 相似文献
4.
On crustal corrections in surface wave tomography 总被引：1，自引：0，他引：1
Mantle models from surface waves rely on good crustal corrections. We investigated how far ray theoretical and finite frequency approximations can predict crustal corrections for fundamental mode surface waves. Using a spectral element method, we calculated synthetic seismograms in transversely isotropic PREM and in the 3-D crustal model Crust2.0 on top of PREM, and measured the corresponding time-shifts as a function of period. We then applied phase corrections to the PREM seismograms using ray theory and finite frequency theory with exact local phase velocity perturbations from Crust2.0 and looked at the residual time-shifts. After crustal corrections, residuals fall within the uncertainty of measured phase velocities for periods longer than 60 and 80 s for Rayleigh and Love waves, respectively. Rayleigh and Love waves are affected in a highly non-linear way by the crustal type. Oceanic crust affects Love waves stronger, while Rayleigh waves change most in continental crust. As a consequence, we find that the imperfect crustal corrections could have a large impact on our inferences of radial anisotropy. If we want to map anisotropy correctly, we should invert simultaneously for mantle and crust. The latter can only be achieved by using perturbation theory from a good 3-D starting model, or implementing full non-linearity from a 1-D starting model. 相似文献
5.
Simulation of SH- and P-SV-wave propagation in fault zones 总被引：3，自引：0，他引：3
Seismic fault-zone (FZ) trapped waves provide a potentially high-resolution means for investigating FZ and earthquake properties. Seismic waves emitted within and travelling along low-velocity FZ layers may propagate many kilometres within the low-velocity structure associated with the fault. Waveform observation of FZ trapped waves can be modelled in terms of FZ layer velocities, thicknesses and attenuation coefficients. This can greatly improve the resolution of imaged FZ structure and microearthquake locations. At present, broad-band theoretical seismograms are restricted to plane-parallel layers of uniform properties. However, it is not clear how realistic these models are compared with actual fault structures which could, for example, flare outwards near the surface, have irregular boundaries, interior heterogeneities, etc. To address these interpretational uncertainties, we perform finite-difference simulations for irregular FZ geometries and non-uniform material properties within the layers. The accuracy of the numerical solutions are verified by comparison with the analytical solution of Ben-Zion & Aki (1990) for plane-parallel structures. Our main findings are: (1) FZs can widen at the ctustal surface only slightly modifying the trapped waves; (2) velocity variations with depth destroy trapped wave propagation at all wavelengths; (3) FZ trapped waves can be obscured by the presence of a low-velocity surface layer; (4) models with short-scale random structures suggest that trapped waves average out irregular FZ geometries, and hence can be effectively modelled by average-property plane-layered media for the observed range of wavelengths. 相似文献
6.
Summary. Velocities of compressional waves are determined for central California rocks at pressures up to 0.7 GPa (7 kb) and temperatures up to 450°C. These data are used to interpret the seismic velocity structure of the crust in the California Coast Ranges. The seismic data on both sides of the San Andreas fault are consistent with the following model; besides some patches of surface sediments the upper 10—15 km of the crust on the northeast side consists predominantly of sedimentary and metasedimentary rocks of the Franciscan assemblage; the lower crust, of a thickness of 15—20 km, may be composed of gabbroic or other mafic rocks. Across the fault on the south-west side, the entire crustal section is probably a granitic complex similar to that exposed on the surface. The proposed model is shown to be consistent with the observed gravity anomaly. 相似文献
7.
The relation between p-Δcurves for surface and deep focus sources is investigated in order to construct synthetic body wave seismograms for non-zero focal depths by the quantized ray theory algorithm. The transformation of a surface focus p-Δ curve into a deep focus p-Δ curve is denned in terms of that curve which corresponds to surface focus rays reflected from the depth at which the deep focus is located. By analogy with the geometry of the surface focus formulation, paths of integration to obtain absolute travel-time and velocity-depth curves can be denned in the p-Δ plane. Explicit inversion from deep focus data is possible only when the velocity-depth structure above the depth of focus is known. Through a comparison of short period quantized ray theory synthetic seismograms with similar Cagniard-de Hoop computations, it is shown that quantized ray theory can be used for accurate predictions of body wave amplitude behaviour corresponding to a wide range of focal depths. 相似文献
8.
We propose a vertical array analysis method that decomposes complex seismograms into body and surface wave time histories by using a velocity structure at the vertical array site. We assume that the vertical array records are the sum of vertically incident plane P and S waves, and laterally incident Love and Rayleigh waves. Each phase at the surface is related to that at a certain depth by the transfer function in the frequency domain; the transfer function is obtained by Haskell's matrix method, assuming a 1-D velocity structure. Decomposed P , S and surface waves at the surface are estimated from the vertical array records and the transfer functions by using a least-squares method in the frequency domain; their time histories are obtained by the inverse Fourier transform. We carried out numerical tests of this method based on synthetic vertical array records consisting of vertically incident plane P and S waves and laterally incident plane Love and Rayleigh waves. Perfect results of the decomposed P , S , Love and Rayleigh waves were obtained for synthetic records without noise. A test of the synthetic records in which a small amount of white noise was added yielded a reasonable result for the decomposed P , S and surface waves. We applied this method to real vertical array records from the Ashigara valley, a moderate-sized sedimentary valley. The array records from two earthquakes occurring at depths of 123 and 148 km near the array (epicentral distance of about 31 km) exhibited long-duration later phases. The analysis showed that duration of the decomposed S waves was a few seconds and that the decomposed surface waves appeared a few seconds after the direct S -wave arrival and had very long duration. This result indicated that the long-duration later phases were generated not by multireflected S waves, but by basin-induced surface waves. 相似文献
9.
Summary. The investigation of temporal variations in seismic velocities sometimes requires the use of paper seismograms. For this reason, an investigation of all of the sources of random error in measuring travel times on seismograms has been undertaken using a mathematical model devised by Jeffreys and some additional results derived using elementary statistics. The most important contribution to the total error is often the error due to linear interpolation between minute markers or other time marks on the seismogram, which can be as high as 0.13 s on smoked paper seismograms recorded at 120 mm min−1 , and as high as 0.076 s on short-period seismograms of the Canadian network recorded at 60 mm min−1 . For 32 explosions at short distances (< 50 km) recorded on smoked paper, however, the median value of the total error in the travel times was 0.016 s. Interpolation errors are generally insignificant for travel-time studies of teleseisms, but may be important in some special studies of local earthquakes and explosions. The theoretical results are useful, not only in seismology, but wherever the accurate timing of an event relative to two reference time markers on a chart recorder is required. 相似文献
10.
Toshiro Tanimoto 《Geophysical Journal International》1995,121(1):103-110
A simple modification of the waveform inversion formula, based on the normal mode perturbation theory, is shown to lead to a formula for traveltime anomalies. The kernel which is derived can be used for traveltime inversion with automatic inclusion of finite frequency effects. Inversion for Earth structure with such kernels will lead to better resolution estimates than ray-theoretical traveltime inversion. Examples of kernels for transverse component seismograms are shown for direct S waves, ScS , Love waves and diffracted S waves. A measure of finite frequency effects is also proposed by comparing our formula with the one from ray theory. A quantity which should be 1 in the case of ray theory is computed for the finite frequency kernels and is shown to have deviations up to about 30 per cent from 1. Therefore, the use of ray theory for long-period body waves applies incorrect weight along a ray path and may introduce a small bias to an earth model. 相似文献
11.
Summary. There is evidence that the equivalent seismic sources of the Amchitka Island explosions — Longshot, Milrow and Cannikin — depart significantly from the simple model of a point compressional-source in a layered elastic-medium. Consequently modelling the observed seismograms using standard source-models may not be the most efficient method of determining source properties. Here an alternative to modelling is used to obtain information on the seismic sources due to the explosions. Broad-band (BB) estimates of the P signals are obtained from the short-period (SP) seismograms, corrected for attenuation, and interpreted in terms of P, pP and radiation from secondary sources. the main conclusions are:
(i) BB estimates of the radiated displacement from the explosions can be obtained with only a small reduction in the signal-to-noise ratio seen on SP seismograms;
(ii) observations of differences in pulse amplitudes and spectra are not necessarily due to differences in anelastic attenuation;
(iii) P and pP at a given station may differ in shape so that notches in the signal spectrum may not be related to source depth;
(iv) there is evidence of arrivals that others have identified as due to slap-down but which could be interpreted as an overshoot to pP;
(v) direct interpretation of the estimated ground displacement is a better procedure for determining the seismic source properties of explosions than modelling SP seismograms using idealised models as a starting point. 相似文献
(i) BB estimates of the radiated displacement from the explosions can be obtained with only a small reduction in the signal-to-noise ratio seen on SP seismograms;
(ii) observations of differences in pulse amplitudes and spectra are not necessarily due to differences in anelastic attenuation;
(iii) P and pP at a given station may differ in shape so that notches in the signal spectrum may not be related to source depth;
(iv) there is evidence of arrivals that others have identified as due to slap-down but which could be interpreted as an overshoot to pP;
(v) direct interpretation of the estimated ground displacement is a better procedure for determining the seismic source properties of explosions than modelling SP seismograms using idealised models as a starting point. 相似文献
12.
David W. Eaton 《Geophysical Journal International》2006,166(3):1249-1258
The Kirchhoff (or tangent plane) approximation, derived from the theoretically complete Kirchhoff–Helmholtz integral representation for the seismic wavefield, has been used extensively for the analysis of seismic-wave scattering from irregular interfaces; however, the accuracy of this method for curved interfaces has not been rigorously established. This paper describes an efficient Kirchhoff algorithm to simulate scattered waves from an arbitrarily curved interface in an elastic medium. Synthetic seismograms computed using this algorithm are compared with exact synthetics computed using analytical formulae for scattering of plane P waves by a spherical elastic inclusion. A windowing technique is used to remove strong internal reverberations from the analytical solution. Although the Kirchhoff method tends to underestimate the total scattering intensity, the accuracy of the approximation improves with increasing value of the wavenumber-radius product, kR . The arrival times and pulse shapes of primary reflections from the sphere are well approximated using the Kirchhoff approach regardless of curvature of the scattering surface, but the amplitudes are significantly underestimated for kR ≤ 5. The results of this work provide some new guidelines to assess the accuracy of Kirchhoff-synthetic seismograms for curved interfaces. 相似文献
13.
R. A. Stephen 《Geophysical Journal International》1977,51(1):169-181
Synthetic seismograms are shown and discussed for the case of the receiver within the medium. Most of the discussion is on the reflectivity method with the receiver within the reflectivity zone, but results using the ray method are shown for comparison. Such synthetic seismograms can be used to interpret data from Oblique Seismic Experiments where shots generated on the surface up to large ranges are recorded in crustal boreholes. 相似文献
14.
We have studied the response of normal modes to perturbations in inner-core shear velocity and attenuation, using fully coupled mode synthetics. Our results indicate that (i) mode pairs n S l – n ±1 S l are strongly coupled by anelasticity, (ii) this coupling causes shear velocity perturbations to strongly affect the Q values of modes through exchange of inner-core characteristics, (iii) there is no evidence for a weakly attenuating inner core in shear, and (iv) the discrepancy between attenuation models returned from normal modes and body waves is small. These results suggest that inversions for inner-core attenuation and shear velocity should be performed simultaneously and should take account of the strong cross-coupling due to attenuation. 相似文献
15.
A fault plane solution using theoretical P seismograms 总被引：1，自引：0，他引：1
We use the method of Hudson and Douglas, Hudson & Blarney to compute seismograms which simulate the codas of 10 short period P -wave seismograms from a shallow earthquake. The polarities and relative amplitudes of P and pP measured from seven of the observed seismograms are used to compute a fault plane solution with confidence limits, assuming that the source radiates as a double couple. This solution is in approximate agreement with that given for the same earthquake by Sykes & Sbar, who used only the onset polarities of short-period P waves. The small difference between the two solutions can be explained by interference between the true first motion of P and microseismic noise at two stations.
The results show that, for some shallow earthquakes, the relative amplitude method has the following advantages over the first motions method. First, a P/pP amplitude ratio (with appropriate confidence limits) can always be measured, even in seismograms which are so noisy that the first motion of P is uncertain. Second, the fault plane solutions obtained from relative amplitudes have known confidence limits. Finally, by using more information from each seismogram, the relative amplitude method requires considerably fewer seismograms than the first motions method. 相似文献
The results show that, for some shallow earthquakes, the relative amplitude method has the following advantages over the first motions method. First, a P/pP amplitude ratio (with appropriate confidence limits) can always be measured, even in seismograms which are so noisy that the first motion of P is uncertain. Second, the fault plane solutions obtained from relative amplitudes have known confidence limits. Finally, by using more information from each seismogram, the relative amplitude method requires considerably fewer seismograms than the first motions method. 相似文献
16.
T. J. Clarke 《Geophysical Journal International》1984,78(3):775-793
Summary. We develop a méthod of reconstructing the elastic paraméters as functions of depth, for a horizontally stratified, isotropic elastic half-space. Unlike previous schemes, which have been able to retrieve the shear wave speed and density from SH seismograms slant stacked at two angles, our méthod makes use of P - SV data at a single stacking paraméter to obtain all three elastic constants. The data required are the elements of the full reflection matrix at the surface, corresponding to measurements of two separate components of the response to two independent sources, one explosive, the other generating shear waves.
In developing this inverse scheme fundamental differences emerge between the acoustic or SH problem, and the coupled P - SV case, the most important being in the nature of the interfacial scattering matrix. We show that it is not possible to make use of the downward reflection data for an interface to determine directly the remaining reflection and transmission coefficients, but that the scattering data may be completed by applying a simple iterative procedure at each interface.
We show the result of applying our inverse scheme to seismograms generated for a six-layered model, including a low-velocity layer. We are able to reconstruct both wave speeds and the density as functions of depth, all quantities being in close agreement with the original model. 相似文献
In developing this inverse scheme fundamental differences emerge between the acoustic or SH problem, and the coupled P - SV case, the most important being in the nature of the interfacial scattering matrix. We show that it is not possible to make use of the downward reflection data for an interface to determine directly the remaining reflection and transmission coefficients, but that the scattering data may be completed by applying a simple iterative procedure at each interface.
We show the result of applying our inverse scheme to seismograms generated for a six-layered model, including a low-velocity layer. We are able to reconstruct both wave speeds and the density as functions of depth, all quantities being in close agreement with the original model. 相似文献
17.
18.
Seismic waves in a stratified half space 总被引：5，自引：0，他引：5
B. L. N. Kennett 《Geophysical Journal International》1980,61(1):1-10
Summary. For a buried source in a stratified elastic half space, the surface displacements are calculated by numerical integration of the Fourier–Bessel transform of the response. In the transform space this response is conveniently represented in terms of the reflection and transmission properties of the half space. For a layered medium this procedure avoids all problems associated with growing exponential terms in the evanescent regime. A slightly attenuative medium is assumed, so that the surface wave poles are shifted off the real slowness axis and thus a contour of integration along this axis may be employed. A general point source is represented by an arbitrary moment tensor.
The procedure is illustrated by calculations of three component seismograms including all P , SV and SH contributions for body and surface waves at moderate ranges. For local earthquakes we illustrate the striking effect of focal depth and also show the effect of sedimentary cover on strong ground motion. 相似文献
The procedure is illustrated by calculations of three component seismograms including all P , SV and SH contributions for body and surface waves at moderate ranges. For local earthquakes we illustrate the striking effect of focal depth and also show the effect of sedimentary cover on strong ground motion. 相似文献
19.
Seismic reflection traveltimes in two-dimensional statistically anisotropic random media 总被引：1，自引：0，他引：1
Bertrand Iooss 《Geophysical Journal International》1998,135(3):999-1010
Velocity estimation remains one of the main problems when imaging the subsurface with seismic reflection data. Traveltime inversion enables us to obtain large-scale structures of the velocity field and the position of seismic reflectors. However, as the media currently under study are becoming more and more complex, we need to know the finer-scale structures. The problem is that below a certain range of velocity heterogeneities, deterministic methods become difficult to use, so we turn to a probabilistic approach. With this in view, we characterize the velocity field as a random field defined by its first and second statistical moments. Usually, a seismic random medium is defined as a homogeneous velocity background perturbed by a small random field that is assumed to be stationary. Thus, we make a link between such a random velocity medium (together with a simple reflector) and seismic reflection traveltimes. Assuming that the traveltimes are ergodic, we use 2-D seismic reflection geometry to study the decrease in the statistical traveltime fluctuations as a function of the offset (the source–receiver distance). Our formulae are based on the Rytov approximation and the parabolic approximation for acoustic waves. The validity and the limits are established for both of these approximations in statistically anisotropic random media. Finally, theoretical inversion procedures are developed for the horizontal correlation structure of the velocity heterogeneities for the simplest case of a horizontal reflector. Synthetic seismograms are then computed (on particular realizations of random media) by simulating scalar wave propagation via finite difference algorithms. There is good agreement between the theoretical and experimental results. 相似文献
20.
Summary. A method of synthetic seismogram computation for teleseismic SV -waves is developed in order to treat quantitatively SV -waves in problems of body wave source inversion and source—receiver structure studies. The method employs WKBJ theory for a generalized ray in a vertically inhomogeneous half-space and the propagator matrix technique for waves in near-surface homogeneous layers. Wavenumber integration is done along the real axis of the wavenumber plane and anelasticity is included by using complex velocity in all regions of the earth model. The near-surface source structure is taken into account in the computation for the case of the shallow source by allowing a point source to be located in the homogeneous layers. Source and receiver area structures are also allowed to differ. A general moment tensor point source is considered. 相似文献