共查询到20条相似文献，搜索用时 46 毫秒
1.
提出一种直接基于八向链码的矩的快速计算方法，给出了与多边形近似法矩的计算及形状识别时间比较，最后使用不变性矩和人工神经网络完成2—D形状识别。实验结果表明，本文所提出的方法具有更高的计算和识别速度。 相似文献
2.
《Ocean Modelling》2007,16(1-2):47-60
The symmetry and stability properties of two unstructured C-grid discretisations of the shallow water equations are discussed. We establish that a scheme in which the circumcentres of the mesh triangles are used as the surface elevation points has advantageous symmetry properties and derive a Coriolis discretisation which preserves these properties. It is shown that the resulting scheme is conservative in a discretised energy norm. We then establish that schemes in which the water surface elevations are stored at the mesh triangle centroids do not share these advantageous symmetry properties. Finally we show examples which demonstrate that the centroid based scheme is subject to unstable growing modes, particularly in long timescale, Coriolis dominated problems; while the energy conservative circumcentre based scheme suffers from no such limitation. We conclude that unstructured C-grid methods using the triangle circumcentres and the conservative Coriolis scheme derived here therefore have advantages for this sort of problem over those schemes based on centroids. 相似文献
3.
The Monin–Obukhov similarity theory for the convective surface layer distinguishes two limiting cases: a dynamic limit and a free-convection limit. The dynamic limit for the convective surface layer is defined as a flow with a logarithmic profile of wind and a zero buoyancy flux at the underlying surface. The free-convection limit is characterized by a zero wind speed and a positive buoyancy flux at the underlying surface. The limits of the generalized Monin–Obukhov similarity theory are able to describe the higher order turbulent moments. In this paper, it is assumed that the convective surface layer consists of two sublayers: the lower dynamic sublayer adjacent to the surface and the upper forced-convection sublayer. The turbulent moments can be approximated separately for each sublayer. Linear approximations are suggested for the turbulent moments of the vertical velocity and the potential temperature variance in the forced-convection sublayer. The first-order expansion terms of them correspond to the free-convection limits of the Monin–Obukhov theory under no-wind conditions. The second-order expansion terms describe profiles of the turbulent moments in under convective conditions with a moderate wind. A comparison between the proposed approximations and experimental data strongly suggests that the linear approximation is correct within a forced-convection range. 相似文献
4.
Christopher J. Damaren 《Ocean Engineering》2010,37(2-3):252-261
In previous work, the problem of optimizing the shape of a thin floating plate to maximize radiation damping was investigated. The plate was modelled with zero draft and floated on the surface of an irrotational, incompressible ocean of infinite extent. For simplicity, only rigid heave motions were considered and the damping coefficient at one wave number was maximized. In the present work, the hydroelastic properties of the optimized plate are determined and compared with those of circular and square plates. The added mass, damping, and diffraction force coefficients in each mode are determined as a function of wave number. The amplitude responses of the plate deflection and bending moments are also presented. The finite element method is used to determine the vibration mode shapes and the flow problem is analysed using the Chen and Mei variational principle wherein the potential field inside a hemisphere surrounding the plate is represented using a spherical harmonic expansion and matched on the hemisphere to an outer field described by distributing sources on the hemisphere. 相似文献
5.
Yu Ke Su Weidong Postgraduate River Harbour Department Nanjing Hydraulic ResearchInstitute Nanjing Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1992,(1)
Generally, the reliability of ami -sliding and anti-overturning stability of an isolated gravity cylinder in a certain working period can be evaluated only when the statistical properties of short term stability are given first. The authors used numerical method to simulate the stability state function of a cylinder in short-crested sea, and further to get the probabilitical characteristics of the structure's stability by time domain analysis. The external loads appeared in the state functions include horizontal wave force, lift force and the respective moments, and the loads are correlated by co- spectrum. The numerical method presented in this paper can be used not only to solve short term reliability problem directly, but to calculate and analyse the long term reliability problem as well. For circular cylinders, an example of simulation and analysis is displayed in this paper. 相似文献
6.
Common parametrization models for cloud microphysical processes use condensate mass density and/or particle number density as prognostic properties. However, other moments of the particle size distribution can likewise be chosen for prediction. This study deals with parametrization models with one and two, respectively, prognostic moments for the sedimentation of drop ensembles. The spectral resolving model defines the reference solution.
The evolution of the vertical profiles of liquid water content, drop number density and rain rate strongly depend on the choice of the prognostic moments in the parametrization models. In models with a single prognostic moment, its vertical profile is copied by all other moments. The moment of most physical pertinence is recommended for prediction. In models with two prognostic moments, the vertical profiles of all moments differ. The orders of the prognostic moments should be chosen close to the order of moments of highest relevance. Otherwise large errors occur. For example, comparison of modelled versus observed radar reflectivity (6th moment with respect to diameter) does not tell much about the quality of other properties if reflectivity is diagnosed from for example, number density and mass density. Furthermore, mass conservation is fulfilled only if mass density is forecasted. 相似文献
The evolution of the vertical profiles of liquid water content, drop number density and rain rate strongly depend on the choice of the prognostic moments in the parametrization models. In models with a single prognostic moment, its vertical profile is copied by all other moments. The moment of most physical pertinence is recommended for prediction. In models with two prognostic moments, the vertical profiles of all moments differ. The orders of the prognostic moments should be chosen close to the order of moments of highest relevance. Otherwise large errors occur. For example, comparison of modelled versus observed radar reflectivity (6th moment with respect to diameter) does not tell much about the quality of other properties if reflectivity is diagnosed from for example, number density and mass density. Furthermore, mass conservation is fulfilled only if mass density is forecasted. 相似文献
7.
To assist in the prototyping and controller design of point-absorber wave energy converters (WECs), an easy-to-implement hybrid integral-equation method is presented for computing the frequency-domain hydrodynamic properties of bodies with a vertical axis of symmetry in waves. The current hybrid method decomposes the flow domain into two parts: an inner domain containing the body and an outer domain extending to infinity. The solution in the inner domain is computed using the boundary-element method, and the outer-domain solution is expressed using eigenfunctions. Proper matching at the domain boundary is achieved by enforcing continuity of velocity potential and its normal derivative. Body symmetry allows efficient computation using ring sources in the inner domain. The current method is successfully applied to three different body geometries including a vertical truncated floating cylinder, the McIver toroid, and the coaxial-cylinder WEC being developed in the authors’ laboratory. In particular, the current results indicate that, by replacing the flat bottom of the coaxial-cylinder WEC with the Berkeley-Wedge (BW) shape, viscous effect can be significantly reduced with only minor negative impact on wave-exciting force, thus increasing WEC efficiency. Finally, by comparing to experimental measurements, the current method is demonstrated to accurately predict the heave added mass and wave-exciting force on the coaxial-cylinder WEC with BW geometry. If a viscous damping correction factor is used, the heave motion amplitude can also be accurately computed. 相似文献
8.
9.
10.
The paper provides a detailed analysis for the second-order diffraction of monochromatic waves. For the second-order potential on the free surface, the paper proposed a forward prediction method for computing the integration on the free surface. By this method we only need to run the infinity integration on the free surface directly for a few points; a one-step quadrature can then be applied successively outward from the body for potentials at other points. For wave diffraction from a body of revolution with a vertical axis, the paper derives a new integral equation, which can cancel the leading singularity in the derivative of ring Green's functions automatically. To obtain accurate results, different approaches are also used to deal with singularities in the ring Green's functions in the integration on both the body surface and free surface. The method has been implemented for bodies of revolution with vertical axes, but the theory is also available for arbitrary bodies.A numerical examination is made to validate the numerical code by comparing the second-order forces and moments on uniform and truncated cylinders and second-order diffraction potentials on the free surface with some published results. The comparison shows that the present results are in good agreement with those published. The method is also used to compute the second-order wave elevation around uniform and truncated cylinders. 相似文献
11.
本文给出了满足给定数字特征和谱的随机序列的产生方法，即用无记忆非线性变换实现非正态随机信号的模拟．该法与Ｇｕｊａｒ法相比较，放宽了变量概率分布的限制，只要求变量矩的存在。同时考虑无记忆非线性变换对谱的影响，用异于Ｌｉｕ的方法在频域上求解输入正态分布随机序列的谱． 相似文献
12.
A complete analytical solution is presented for the linear diffraction of oblique waves by horizontal rectangular cylinders either fixed at the free surface or mounted on the sea bed in a finite-depth of water. Helmholtz equation is employed as the governing differential equation obtained by reducing the 3-D oblique wave scattering problem to a 2-D case. According to the method proposed, the fluid region is divided into three sub-regions in which the governing differential equation is solved by the separation of variables. The solutions for each region are then matched on the common boundaries of sub-regions to determine the unknowns of the eigen series expansions and Fourier series. Thus transmitted and reflected waves are obtained in the far-field, and forces and moments acting on the rectangular cylinder fixed at the free surface are also given. Comparisons are made in order to check the accuracy of the method. 相似文献
13.
WANG Ying-guang 《海洋工程》2017,31(3):291-298
This article proposes a new methodology to predict the wave height and period joint distributions by utilizing a transformed linear simulation method. The proposed transformed linear simulation method is based on a Hermite transformation model where the transformation is chosen to be a monotonic cubic polynomial, calibrated such that the first four moments of the transformed model match the moments of the true process. The proposed new approach is applied for calculating the wave height and period joint distributions of a sea state with the surface elevation data measured at an offshore site, and its accuracy and efficiency are favorably validated by using comparisons with the results from an empirical joint distribution model, from a linear simulation model and from a second-order nonlinear simulation model. 相似文献
14.
15.
The hydrodynamic problem arising form the interaction of linear water waves with a wave energy device consisting of two coaxial vertical cylinders of different radii is investigated. One cylinder is riding in waves, while another is submerged in fluid. By use of the method of separation of variables and the method of matched eigenfunction expansion, analytical expressions for the potentials are obtained. Using the expressions for the potentials, analytical expressions for the hydrodynamic coefficients and exciting forces/moments on the device are obtained. Numerical results of the hydrodynamic coefficients and exciting forces/moments are presented for some ratios of the radius of the submerged cylinder to that of the riding one. It is found that the radius of the submerged cylinder has a significant influence on the hydrodynamic coefficients and exciting forces/moments for relatively bigger radius of the submerged cylinder at low frequencies. 相似文献
16.
The subsurface water beneath the summer mixed layer is important to air–sea carbon flux, while its geochemical properties are not frequently observed. A data assimilation method is applied to determine the geochemical fields in the subsurface (i.e., 100 m) from the data collected at the surface in the North Pacific. This method, in the family of the inverse methods, is constructed on a one-dimensional bulk mixed layer model. In addition to temperature and salinity, dissolved inorganic carbon (DIC) and alkalinity are also considered as model variables, whereas biological productivity is omitted. The geochemical properties increase from the fall to the winter, which is the period simulated by the model, as the mixed layer develops and entrains subsurface water rich in DIC and alkalinity. Consequently, the geochemical fields in the mixed layer must have extremely sharp north–south gradients in the western region of the North Pacific and can be reproduced only by enhancing the north–south gradients in the subsurface. The fields reconstructed by the data assimilation provide useful information about the biogeochemical cycles. It is suggested that the large difference in DIC between the surface and the subsurface in the northwestern region is produced by transporting DIC from the mixed layer to the subsurface in the summer, implying extremely high biological productivity. Furthermore, it is suggested that high DIC in the ambient water is maintained by the upwelling of lower layer water. 相似文献
17.
《Coastal Engineering》2006,53(11):915-927
A set of empirical formulations is derived that describe important wave properties in shallow water as functions of commonly used parameters such as wave height, wave period, local water depth and local bed slope. These wave properties include time varying near-bed orbital velocities and statistical properties such as the distribution of wave height and wave period. Empirical expressions of characteristic wave parameters are derived on the basis of extensive analysis of field data using recently developed evolutionary algorithms. The field data covered a wide range of wave conditions, though there were few conditions with wave periods greater than 15 s. Comparison with field measurements showed good agreement both on a time scale of a single wave period as well as time averaged velocity moments. 相似文献
18.
Ying-guang Wang 《中国海洋工程》2018,32(6):655-664
This paper first proposes a new approach for predicting the nonlinear wave trough distributions by utilizing a transformed linear simulation method. The linear simulation method is transformed based on a Hermite transformation model where the transformation is chosen to be a monotonic cubic polynomial and calibrated such that the first four moments of the transformed model match the moments of the true process. The proposed new approach is applied for calculating the wave trough distributions of a nonlinear sea state with the surface elevation data measured at the coast of Yura in the Japan Sea, and its accuracy and efficiency are convincingly validated by comparisons with the results from two theoretical distribution models, from a linear simulation model and a second-order nonlinear simulation model. Finally, it is further demonstrated in this paper that the new approach can be applied to all the situations characterized by similar nondimensional spectrum. 相似文献
19.
在2—D不变性矩快速计算的基础上，利用人工神经网络，使用不变性矩完成2—D形状的识别。实验结果与现有文献的结果比较，本文采用的方法具有特征数目少、意义统一、识别快速、准确的特点。 相似文献
20.
The finite element method based on linear diffraction theory proposed by Zienkiewicz and Bettess (1977) has been used to compute wave loads and moments about the bed of surface piercing cylinders of circular, square, rectangular and elliptical sections for different angles of wave incidence. On the basis of the results obtained, a design method is presented in the form of simple design charts for estimating wave forces and moments on large cylinders of arbitrary sections. The numerical solutions obtained have been checked for their validity by comparing with other theoretical solutions and experimental data. Further the application of the design method to a case study shows good correlation with experimental and other theoretical solutions. 相似文献