首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 24 毫秒
1.
The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na3AlF6] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO2, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO2 and H2O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ13C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ18O of CO2 (+ 21 to + 42‰ VSMOW) and δ18O of H2O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H2O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

2.
Groundwaters and surface water in the Shihongtan sandstone-hosted U ore district, Xinjiang, NW China, were sampled and analyzed for their major-, and trace element concentrations and oxygen, hydrogen, boron and strontium isotope compositions in order to assess the possible origins of the waters and water–rock interactions that occurred in the deep aquifer system. The waters in the study district have been grouped into three hydrochemical facies: Facies 1, potable spring-water, is a pH neutral (7.0), Na–Ca–HCO3 type water with low total dissolved solids (TDS; 0.2 g/l, fresh) and has δ18O of − 8.3‰, δD of − 48.2‰,δ11B of 1.5‰, and 87Sr/86Sr of 0.70627. Facies 2 groundwaters are mildly acidic to mildly alkaline (pH of 6.5–8.0, mean 7.3), Na–Ca–Mg–Cl–SO4 type waters with moderate TDS (8.2 g/l–17.2 g/l, mean 9.3 g/l, brackish) and haveδ18O values in the − 5.8‰ to − 9.3‰ range (mean − 8.1‰), δD values in the − 20.8‰ to − 85.5‰ range (mean − 47.0‰),δ11B values in the + 9.5‰ to + 39.1‰ range (mean + 17.1‰), and 87Sr/86Sr values in the 0.70595 to 0.70975 range (mean 0.70826). Facies 3, Aiting Lake water, is a mildly alkaline (pH = 7.4), Na–Ca–Mg–Cl–SO4 type water with the highest TDS (249.1 g/l, brine) and has δ18O of − 2.8‰, δD of − 45.8‰,δ11B of 21.2‰, and 87Sr/86Sr of 0.70840. The waters from the study district show a systematic increase in major, trace element and TDS concentrations and δ11B values along the pathway of groundwater migration which can only be interpreted in terms of water–rock interaction at depth and strong surface evaporation. The hydrochemical and isotopic data presented here confirm that the groundwaters in the Shihongtan ore district are the combined result of migration, water–rock interaction and mixing of meteoric water with connate waters contained in sediments.  相似文献   

3.
We have analysed the halogen concentrations and chlorine stable isotope composition of fluid inclusion leachates from three spatially associated Fe-oxide ± Cu ± Au mineralising systems in Norrbotten, Sweden. Fluid inclusions in late-stage veins in Fe-oxide–apatite deposits contain saline brines and have a wide range of Br/Cl molar ratios, from 0.2 to 1.1 × 10−3 and δ37Cl values from −3.1‰ to −1.0‰. Leachates from saline fluid inclusions from the Greenstone and Porphyry hosted Cu–Au prospects have Br/Cl ratios that range from 0.2 to 0.5 × 10−3 and δ37Cl values from −5.6‰ to −1.3‰. Finally, the Cu–Au deposits hosted by the Nautanen Deformation Zone (NDZ) have Br/Cl molar ratios from 0.4 to 1.1 × 10−3 and δ37Cl values that range from −2.4‰ to +0.5‰, although the bulk of the data fall within 0‰ ± 0.5‰.The Br/Cl ratios of leachates are consistent with the derivation of salinity from magmatic sources or from the dissolution of halite. Most of the isotopic data from the Fe-oxide–apatite and Greenstone deposits are consistent with a mantle derived source of the chlorine, with the exception of the four samples with the most negative values. The origin of the low δ37Cl values in these samples is unknown but we suggest that there may have been some modification of the Cl-isotope signature due to fractionation between the mineralising fluids and Cl-rich silicate assemblages found in the alteration haloes around the deposits. If such a process has occurred then a modified crustal source of the chlorine for all the samples cannot be ruled out although the amount of fractionation necessary to generate the low δ37Cl values would be significantly larger.The source of Cl in the NDZ deposits has a crustal signature, which suggests the Cl in this system may be derived from (meta-) evaporites or from input from crustal melts such as granitic pegmatites of the Lina Suite.  相似文献   

4.
The Changkeng Au and Fuwang Ag deposits represent an economically significant and distinct member of the Au–Ag deposit association in China. The two deposits are immediately adjacent, but the Au and Ag orebodies separated from each other. Ores in the Au deposit, located at the upper stratigraphic section and in the southern parts of the orefield, contain low Ag contents (< 11 ppm); the Ag orebodies, in the lower stratigraphic section, are Au-poor (< 0.2 ppm). Changkeng is hosted in brecciated cherts and jasperoidal quartz and is characterized by disseminated ore minerals. Fuwang, hosted in the Lower Carboniferous Zimenqiao group bioclastic limestone, has vein and veinlet mineralization associated with alteration comprised of quartz, carbonate, sericite, and sulfides. Homogenization temperatures of fluid inclusions from quartz veinlets in the Changkeng and Fuwang deposits are in the range of 210 ± 80 °C and 230 ± 50 °C, respectively. Salinities of fluid inclusions from the two deposits range from 1.6 to 7.3 wt.% and 1.6 to 2.6 wt.% equiv. NaCl, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of the fluid inclusions from the Changkeng deposit range from − 80‰ to − 30‰, − 7.8‰ to − 3.0‰, − 16.6‰ to − 17.0‰ and 0.0100 to 0.0054 Ra, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of fluid inclusions from the Fuwang deposit range from − 59‰ to − 45‰, − 0.9‰ to 4.1‰, − 6.7‰ to − 0.6‰ and 0.5930 to 0.8357 Ra, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of the fluid inclusions suggest the ore fluids of the Changkeng Au-ore come from the meteoric water and the ore fluids of the Fuwang Ag-ore are derived from mixing of magmatic water and meteoric water. The two deposits also show different Pb-isotopic signatures. The Changkeng deposit has Pb isotope ratios (206Pb/204Pb: 18.580 to 19.251, 207Pb/204Pb: 15.672 to 15.801, 208Pb/204Pb: 38.700 to 39.104) similar to those (206Pb/204Pb: 18.578 to 19.433, 207Pb/204Pb: 15.640 to 15.775, 208Pb/204Pb: 38.925 to 39.920) of its host rocks and different from those (206Pb/204Pb: 18.820 to 18.891, 207Pb/204Pb: 15.848 to 15.914, 208Pb/204Pb: 39.579 to 39.786) of the Fuwang deposit. The different signatures indicate different sources of ore-forming material. Rb–Sr isochron age (68 ± 6 Ma) and 40Ar–39Ar age (64.3 ± 0.1 Ma) of the ore-related quartz veins from the Ag deposit indicate that the Fuwang deposit formed during the Cenozoic Himalayan tectonomagmatic event. Crosscutting relationships suggests that Au-ore predates Ag-ore. The adjacent Changkeng and Fuwang deposits could, however, represent a single evolved hydrothermal system. The ore fluids initially deposited Au in the brecciated siliceous rocks, and then mixing with the magmatic water resulted in Ag deposition within fracture zones in the limestone. The deposits are alternatively the product of the superposition of two different geological events. Age evidence for the Fuwang deposit, together with the Xiqiaoshan Tertiary volcanic-hosted Ag deposit in the same area, indicates that the Pacific Coastal Volcanic Belt in the South China Fold Belt has greater potential for Himalayan precious metal mineralization than previous realized.  相似文献   

5.
Fluid inclusion studies combined with the isotope geochemistry of several generations of fracture calcite from the Olkiluoto research site, Finland, has been used to better understand the past thermal and fluid history in the crystalline rock environment. Typically, fracture mineral investigations use O and C isotopes from calcite and an estimate of the isotopic composition of the water that precipitated the calcite to perform δ18O geothermometry calculations to estimate past temperature conditions. By combining fluid inclusion information with calcite isotopes, one can directly measure the temperature at which the calcite formed and can better determine past fluid compositions. Isotopic, petrologic and fluid inclusion studies at the Olkiluoto research site in Finland were undertaken as part of an investigation within the Finnish nuclear waste disposal program. The study revealed that four fluids were recorded by fracture calcites. From petrologic evidence, the first fluid precipitated crystalline calcite at 151–225°C with a δ13C signature of −21 to −13.9‰ PDB and a δ18O signature of 12.3–13.0‰ SMOW. These closed fracture fillings were found at depths greater than 500 m and were formed from a high temperature, low salinity, Na–Cl fluid of possible meteoric water altered by exchange with wallrock or dilute basinal origin. The next fluid precipitated crystalline calcite with clay at 92–210°C with a δ13C signature of −2.6 to +3.8‰ PDB and a δ18O signature of 19.4–20.7‰ SMOW. These closed fracture fillings were found at depths less than 500 m and were formed from a moderate to high temperature, low to moderate salinity, Na–Cl fluid, likely of magmatic origin. The last group of calcites to form, record the presence of two distinct fluid types. The platy (a) calcite formed at 95–238°C with a δ13C signature of −12.2 to −3.8‰ PDB and a δ18O signature of 14.9–19.6‰ SMOW, from a high temperature, low salinity, Na–Cl fluid of possible magmatic origin. The platy (b) calcite formed at 67–98°C with a δ13C signature of −13.0 to −6.2‰ PDB and a δ18O signature of 15.1–20.1‰ SMOW, from a low temperature, high salinity, Ca–Na–Cl fluid of possible basinal brine origin. The two calcites are related through a mixing between the two end members. The source of the fluids for the platy grey (a) calcites could be the olivine diabase dykes and sills that cut through the site. The source of fluids for the platy (b) calcites could be the Jotnian arkosic sandstone formations in the northern part of the site. At the Olkiluoto site, δ18O geothermometry does not agree with fluid inclusion data. The original source of the water that forms the calcite has the largest effect on the isotopic signature of the calcites formed. Large isotopic shifts are seen in any water by mineral precipitation during cooling under rock–water equilibrium fractionation conditions. Different calcite isotopic signatures are produced depending on whether cooling occurred in an open or closed system. Water–rock interaction, at varying W/R ratios, between a water and a host rock can explain the isotopic shifts in many of the calcites observed. In some cases it is possible to shift the δ18O of the water by +11.5‰ (SMOW) using a realistic water–rock ratio. This process still does not explain some of the very positive δ18O values calculated using fluid inclusion data. Several other processes, such as low temperature recrystallization, boiling, kinetic effects and dissolution of calcite from fluid inclusion walls can affect isotopic signatures to varying degrees. The discrepancy between fluid inclusion data and δ18O geothermometry at the Olkiluoto site was most likely due to poor constraint on the original source of the water.  相似文献   

6.
The CO2 gas reservoir sandstones in the Hailaer Basin contain abundant dawsonite and provide an ideal laboratory to study whether any genetic relationship exists between dawsonite and the modern gas phase of CO2. The origins of dawsonite and CO2 in these sandstones were studied by petrographic and isotopic analysis. According to the paragenetic sequence of the sandstones, dawsonite grew later than CO2 charging at 110–85 Ma. The dawsonite δ18O value is 7.4‰ (SMOW), and the calculated δ18O values of the water present during dawsonite growth are from −11.4‰ to −9.2‰ (SMOW). This, combined with the NaHCO3-dominated water linked to dawsonite growth, suggests meteoric water being responsible for dawsonite growth. The δ13C values of gas phase CO2 and the ratios of 3He/4He of the associated He suggest a mantle magmatic origin of CO2-rich natural gas in Hailaer basin. Dawsonite δ13C values are −5.3‰ to −1.5‰ (average −3.4‰), and the calculated δ13C values of CO2 gas in isotopic equilibrium with dawsonite are −11.4‰ to −7.3‰. These C isotopic values are ambiguous for the dawsonite C source. From the geological context, the timing of events, together with formation water conditions for dawsonite growth, dawsonite possibly grew in meteoric-derived water, atmospherically-derived CO2 maybe, or at least the dominant, C source for dawsonite. It seems that there are few relationships between dawsonite and the modern gas phase of CO2 in the Hailaer basin.  相似文献   

7.
The isotopic composition of Fe was determined in water, Fe-oxides and sulfides from the Tinto and Odiel Basins (South West Spain). As a consequence of sulfide oxidation in mine tailings both rivers are acidic (1.45 < pH < 3.85) and display high concentrations of dissolved Fe (up to 420 mmol l− 1) and sulphates (up to 1190 mmol l− 1).The δ56Fe of pyrite-rich samples from the Rio Tinto and from the Tharsis mine ranged from − 0.56 ± 0.08‰ to + 0.25 ± 0.1‰. δ56Fe values for Fe-oxides precipitates that currently form in the riverbed varied from − 1.98 ± 0.10‰ to 1.57 ± 0.08‰. Comparatively narrower ranges of values (− 0.18 ± 0.08‰ and + 0.21 ± 0.14‰) were observed in their fossil analogues from the Pliocene–Pleistocene and in samples from the Gossan (the oxidized layer that formed through exposure to oxygen of the massive sulfide deposits) (− 0.36 ± 0.12‰ to 0.82 ± 0.07‰). In water, δ56Fe values ranged from − 1.76 ± 0.10‰ to + 0.43 ± 0.05‰.At the source of the Tinto River, fractionation between aqueous Fe(III) and pyrite from the tailings was less than would be expected from a simple pyrite oxidation process. Similarly, the isotopic composition of Gossan oxides and that of pyrite was different from what would be expected from pyrite oxidation. In rivers, the precipitation of Fe-oxides (mainly jarosite and schwertmannite and lesser amounts of goethite) from water containing mainly (more than 99%) Fe(III) with concentrations up to 372 mmol l− 1 causes variable fractionation between the solid and the aqueous phase (− 0.98‰ < Δ56Fesolid–water < 2.25‰). The significant magnitude of the positive fractionation factor observed in several Fe(III) dominated water may be related to the precipitation of Fe(III) sulphates containing phases.  相似文献   

8.
Individual and monthly precipitation samples from the polluted atmosphere of Bologna (Emilia-Romagna province) were collected during March 1996 to May 1997 and analyzed for major ions in solution and S isotopes in dissolved SO4.Weighted mean enrichment factors relative to seawater are found to be 1.0 for Na, 15.2 for K, 105 for Ca, 3.3 for Mg, 17.3 for SO4 and 663 for HCO−3. Very good positive correlations are observed for the Ca2+–Mg2+–HCO−3–SO2−4–NO−3 system, indicating that dissolution of Ca (±Mg)-carbonate particles by H2SO4 and HNO3 from combustion of oil and gas is a major process controlling the chemical composition of rain and snow. Na+ and Cl− in monthly precipitation derive essentially from sea spray, but the contribution of Na+ from continental sources is appreciable in a number of individual rains. NH+4 appears to be on average more abundant in spring and summer precipitation, its main sources being microbial activity in soils and application of fertilizers. K+ is probably of continental origin from soil dust.The S isotopic composition of SO4 is systematically positive, with mean δ34S values of +3.2±1.6‰ (n=40) in individual precipitation and +2.8±1.4‰ (n=12) in monthly precipitation. These isotopic compositions are interpreted in terms of a dominant contribution of S from anthropogenic emissions and subordinate contributions from biogenic and marine sources. Pollutant SO4 is estimated to have a δ34S value in the range +2.5 to +4.5‰, whereas a distinctive δ34S of −4.5‰ or lower indicates SO4 from oxidation of biogenic gases.The isotopic and chemical compositions of SO4 do not depend on wind direction, thus testifying to a mostly local source for pollutant S in the Bologna atmosphere.  相似文献   

9.
Stable carbon- and oxygen-isotope compositions of calcite and dolomite cements have been used to understand porewater evolution in the Upper Tertiary Hazeva Formation within the Dead Sea Graben, southern Israel. Sandstone samples were obtained from four boreholes in three tectonic blocks of the graben over depths of 253–6448 m, a variation that largely reflects differential subsidence of individual fault-bounded blocks. Early carbonate cements dominate diagenesis. Calcite occurs at <1600 m, but was replaced by dolomite at greater depths. Dolomite at 1600–2700 m is Fe-poor (<0.8 mol% FeCO3), and at 4700–6200 m, Fe-rich (0.5–7.2 mol% FeCO3). Magnesite, anhydrite and halite are the final diagenetic phases. Calcite has positively correlated δ18O (+21‰ to +25‰) and δ13C (−6‰ to −2‰) values that generally decrease with depth. Dolomite has a wider variation in δ18O (+18‰ to +30‰) and δ13C (−8‰ to −1‰) values, which also generally are lower with increasing depth. However, the δ13C and δ18O values of dolomite from the uppermost 400 m of the Hazeva Formation in the Sedom Deep-1 borehole are anomalous in spanning the entire range of stable carbon and oxygen isotopic compositions over this relatively small interval.The decreasing dolomite δ13C values likely indicate an increased contribution of carbon from organic sources with increasing depth. Except for the uppermost 400 m, Hazeva Formation dolomite in the Sedom Deep-1 borehole has stable carbon-isotope compositions that imply initial dolomitization at much shallower levels, prior to the preferential subsidence of this tectonic block. The oxygen isotopic compositions of the calcite cement are best explained by equilibration at present burial temperatures (≤55 °C) with porewater of meteoric origin. Its δ18O values increased from −5‰ at the shallowest depths to 0‰ at 1600 m. The dolomite oxygen isotopic compositions also reflect equilibration at present burial temperatures with porewaters ranging from 0‰ at 1600 m to +7‰ at 3600 m (100 °C). In the deepest fault block (Sedom Deep-1 borehole), however, increasingly Fe-rich dolomite has (re)equilibrated with porewater whose δ18O values decreased from +9‰ at 4750 m (120 °C) to +1‰ to +2‰ by 6200 m (150 °C).Much of the dolomite likely formed at relatively shallow depths from saline brines derived from precursors to the Dead Sea. These infiltrated the Hazeva Formation, mixing with and largely displacing meteoric water, and dolomitizing calcite. Rock–water ratios tended to be high during these processes. However, the upper 400 m of the Hazeva Formation in the deepest fault block were likely deposited during its rapid tectonic subsidence, and largely escaped the initial style of dolomitization pervasive elsewhere in the study area. These sediments were also capped by evaporites. This relatively thin interval likely became a preferential conduit for brines that escaped underlying and overlying strata, including the Fe-rich, lower 18O fluids (evolved seawater?) present in the deepest part of the graben. These rocks present the most promising target for the passage and accumulation of hydrocarbons in the study area.  相似文献   

10.
Petrological data provide evidence that framboidal pyrite, Fe-carbonates and kaolinite are the major diagenetic minerals developed during burial diagenesis in the Tertiary Niger Delta sandstones and associated mudrocks. The pyrite sulphur, carbonate carbon and oxygen and kaolinite oxygen and hydrogen isotope compositions have been determined. These data (pyrite, δ34S = −24.8 to 21.0‰; “siderite”, δ13C(PDB) = −14.7 to +5.0‰, δ18O(PDB) = −19.1 to −0.6‰; Fe-calcite, δ13C(PDB) = +17.5 to 17.9‰, δ18O(PDB) = −8.3 to −8.0‰; kaolinite, δ18O(SMOW) = +14.7 to 17.5‰, δD (SMOW) = −86 to −43‰) have been used to interpret the isotopic compositions of the precipitating pore fluids and/or the temperatures of mineral formation. The interpretation of these results indicate that in the deltaic depositional setting the syndepositional pore waters had a significant but variable marine influence that favoured the early formation of pyrite. Subsequently the subsurface influence of meteoric waters, showing varying degrees of modification involving organic and/or water-rock reactions, played an increasingly significant role in the development of later diagenetic cements in the sediments when abundant authigenic carbonates and kaolinites were formed.  相似文献   

11.
Chemical and isotopic compositions have been measured on 62 microbial gases from Tertiary hemipelagic sediments in the Middle America Trench off Guatemala and from decaying kelp and surf grass currently accumulating in Scripps Submarine Canyon off southern California. Gases from the Middle America Trench have been generated primarily by the reduction of carbon dioxide; methane δ13C varies from −84‰ to −39‰, methane δD varies from −208‰ to −145‰, and carbon dioxide δ13 C varies from −27‰ to +28‰. Gases from Scripps Submarine Canyon have been generated primarily by acetate dissimilation; methane δ13 C varies from −63‰ to −43‰, methane δD varies from −331‰ to −280‰, and carbon dioxide δ13C varies from −17‰ to +3‰.Methane δ13C values as heavy as −40‰ appear to be uncommon for gases produced by carbon dioxide reduction and, in the Middle America Trench, are associated with unusually positive carbon dioxide δ13C values. However, based on the 25‰ intramolecular fractionation between acetate car☐yl carbon and methyl carbon estimated from the Scripps Submarine Canyon data, methane produced by acetate dissimilation may commonly have heavy δ13C values. The δD of methane derived from acetate is more negative than natural methanes from other origins. Microbial methane δD values appear to be controlled primarily by interstitial water δD and by the relative proportions of methane derived from carbon dioxide and acetate.The chemical and isotopic compositions of microbial gas and thermogenic gas overlap, making it difficult to determine the origins of many commercial natural gases from methane δ13C and C2+ hydrocarbon concentrations alone. Measurements of methane δD and carbon dioxide δ13C can provide useful additional information, and together with ethane δ13C data, help identify gases with mixed microbial and thermogenic origins.  相似文献   

12.
Heterogeneous shallow Plio-Quaternary formations of the Souss Plain represent the most important aquifer in southern High Atlas Mountains in Morocco. The present work was conducted in the Souss Upstream Basin to identify the chemical characteristics and the origin of groundwater in an aquifer under semi-arid climate. Isotopic and hydrochemical compositions combined with geological and hydrogeological data were used for this purpose. The total dissolved solids vary from 239 to 997 mg l−1, and the following groundwater types are recognized: Ca2+–Mg2+–HCO3−, Ca2+–Mg2+–SO42− and Ca2+–Mg2+–Cl−. The groundwater is saturated and slightly supersaturated with respect to carbonate minerals and undersaturated with respect to evaporite minerals, which means that the groundwater composition is largely controlled by the dissolution of carbonate rocks known in the basin. The isotopic contents of groundwaters ranged from −8‰ to −5.2‰ for δ18O, from −52‰ to −34‰ for δD, and from 0 to 5.5 TU for tritium. The hydrogen (δD) and oxygen (δ18O) isotope signatures reveal a significant infiltration before evaporation takes place, indicating a major recharge directly from fractures in the crystalline and limestone formations of Atlas Mountains (above 800 m a.s.l.) and infiltration of surface water in the alluvial cones at the border of the Atlas basins. The very low tritium values suggest that the groundwater recharge follows a long flow path and a mixing between old and modern water is shown. However, a slight evaporation effect is noted in the southern part of the basin close to the Anti-Atlas Mountains.  相似文献   

13.
In the Pattani Basin, a failed-rift basin, extensive water-rock interaction has occurred between subquartzose alluvial sandstones of Miocene age and their pore fluids. Diagenetic rates and pathways have been strongly influenced by high geothermal gradients, high CO2 fugacities, and low pore water salinities. Depositional pore water was fresh to brackish, depending on the depositional environment of the sediments. Chloride concentrations in modern formation water are believed primarily to reflect the proportions of river and sea water in the depositional environment. However, the concentration of other important solutes and the isotopic composition of the formation waters can not be explained by roportional mixing of these two end-member waters. Dissolution of detrital plagioclase (An = 3) and K- feldspar are reactions of major significance that are reflected chemically in the Na/Cl and K/Cl ratios of the formation water. Despite the high temperature of the sandstones (120–200°C), diagenetic albite does not occur. Geochemical calculations indicate the formation water is undersaturated with respect to both orthoclase and albite. This style of feldspar diagenesis differs significantly from that of sandstones of similar composition in other basins, and has probably influenced other aspects of silicate diagenesis.Important authigenic minerals are: 1. locally abundant calcite cement (δ13C= −12.8, δ18O= −17.3 PDB), an early diagenetic phase that formed at about 60°C; 2. pore-filling kaolinite (δ18O= 9.9, δD= −83.5SMOW) that was closely associated with feldspar dissolution and formed over a range of temperatures; and 3. fibrous pore-lining and pore-bridging illite (δ18O = 9.8, δD = − 86.7 SMOW, the last significant cement, formed at temperatures of 120 to 150°C. Potassium/argon dates on illite indicate that sandstone diagenesis took place during a period of rapid sedimentation in the first two-thirds of the burial history.Comparison of Pattani Basin diagenesis with diagenesis of sandstones of similar age in other sedimentary basins demonstrates that chemical diagenesis, relative to mechanical compaction, has been especially rapid in the Pattani Basin. This reflects the effect of high temperatures on reaction rates. The net effect is a high average rate of porosity loss with burial (11% km).  相似文献   

14.
The Maastrichtian–Danian limestones of the Yacoraite Formation (northwestern Argentina) show carbon and oxygen isotopic values consistent with shallow marine conditions. The members of the formation respond to different sedimentary environments and are characterised by distinctive stable isotopes and geochemistry. The basal Amblayo Member is composed of high-energy dolomitic limestones and limestones with positive isotopic values (+2‰ δ13C, +2‰ δ18O). The top of the member reveals an isotopic shift of δ13C (−5‰) and δ18O (−10‰), probably related to a descent in the sea level. The sandy Güemes Member has isotopically negative (−2‰ δ13C, −1‰ δ18O) limestones, principally controlled by water mixing, decreased organic productivity, and compositional changes in the carbonates. The isotopically lighter limestones are calcitic, with a greater terrigenous contribution and different geochemical composition (high Si–Mn–Fe–Na, low Ca–Mg–Sr). These isotopic and lithological changes relate to the Cretaceous–Palaeogene transition. The Alemanía Member, composed of dolomitic limestones and pelites, represents a return to marine conditions and shows a gradual increase in isotopic values, reaching values similar to those of the Amblayo Member. The Juramento Member, composed of stromatolite limestones, shows isotopic variations that can be correlated with the two well-defined, shallowing-upward sequences of the member.  相似文献   

15.
The possible contamination of a groundwater system with industrial wastewater originating from a paper mill factory has been investigated in Piteå, N. Sweden. Six samples were collected from the wastewater in the waste dump and twelve samples from the adjacent groundwater were analyzed for chemistry and sulfur isotopes. The industrial wastewater is a saline water consisting mainly of Na–HCO3–SO4, having a high pH and showing δ34S values between 7‰ and 9‰ affected by bacterial sulfate reduction. The groundwaters are relatively dilute, dominated by Na+, Ca2+ and HCO3−, but with varying concentrations as exemplified by sulfate with concentrations varying between 3 and 69 mg L− 1 while the δ34S values range from − 0.5‰ to 14.3‰. The data suggest that the main S sources in the waters are the bedrock sulfides and/or atmospheric deposition, which, sometimes, are overlapped by bacterial sulfate reduction. Contamination from the waste dump does not occur.  相似文献   

16.
We have measured the boron concentration and isotope composition of regionally expansive borate deposits and geothermal fluids from the Cenozoic geothermal system of the Argentine Puna Plateau in the central Andes. The borate minerals borax, colemanite, hydroboracite, inderite, inyoite, kernite, teruggite, tincalconite, and ulexite span a wide range of δ11B values from −29.5 to −0.3‰, whereas fluids cover a range from −18.3 to 0.7‰. The data from recent coexisting borate minerals and fluids allow for the calculation of the isotope composition of the ancient mineralizing fluids and thus for the constraint of the isotope composition of the source rocks sampled by the fluids. The boron isotope composition of ancient mineralizing fluids appears uniform throughout the section of precipitates at a given locality and similar to values obtained from recent thermal fluids. These findings support models that suggest uniform and stable climatic, magmatic, and tectonic conditions during the past 8 million years in this part of the central Andes. Boron in fluids is derived from different sources, depending on the drainage system and local country rocks. One significant boron source is the Paleozoic basement, which has a whole-rock isotopic composition of δ11B=−8.9±2.2‰ (1 SD); another important boron contribution comes from Neogene-Pleistocene ignimbrites (δ11B=−3.8±2.8‰, 1 SD). Cenozoic andesites and Mesozoic limestones (δ11B≤+8‰) provide a potential third boron source.  相似文献   

17.
The Cobre–Babilonia vein system formed during a single major hydrothermal stage and is part of the Taxco district in Guerrero, southern Mexico. Homogenization and ice melting temperatures range from 160 to 290 °C and from − 11.6 to − 0.5 °C, respectively. We determined an approximate thermal gradient of 17 to 20 °C per 100 m using fluid inclusions. A thermal peak marked by the 290 °C isotherm is interpreted as a major feeder channel to the veins. The highest content of Zn + Pb in ore coincides with the 220 and 240 °C isotherms. Salinities of mineralizing fluids range from 0.8 to 15.6 wt.% NaCl equiv, and are distributed in two populations that can be related with barren or ore-bearing vein sections, with 0.8 to 6 wt.% NaCl equiv and 7 to 15.6 wt.% NaCl equiv, respectively. δ13C and δ18O water values from calcite from the Cobre–Babilonia vein system and the Esperanza Vieja and Guadalupe mantos range − 5.4‰ to − 10.4‰ and 9.9‰ to 13.4‰, respectively. δ34S values range from 0‰ to 3.2‰ and − 0.7‰ to − 4.3‰ in sphalerite, − 4‰ to 0.9‰ in pyrite, and − 1.4‰ to − 5.5‰ in galena. Both fluid inclusion and stable isotope data are compatible with magmatic and meteoric sources for mineralizing fluids. Also, sulfur isotope compositions suggest both magmatic and sedimentary sources for sulfur.  相似文献   

18.
Previous studies on the coal-bed methane potential of the Zonguldak basin have indicated that the gases are thermogenic and sourced by the coal-bearing Carboniferous units. In this earlier work, the origin of coal-bed gas was only defined according to the molecular composition of gases and to organic geochemical properties of the respective source rocks, since data on isotopic composition of gases were not available. Furthermore, in the western Black Sea region there also exist other source rocks, which may have contributed to the coal-bed gas accumulations. The aim of this study is to determine the origin of coal-bed gas and to try a gas-source rock correlation. For this purpose, the molecular and isotopic compositions of 13 headspace gases from coals and adjacent sediments of two wells in the Amasra region have been analyzed. Total organic carbon (TOC) measurements and Rock-Eval pyrolysis were performed in order to characterize the respective source rocks. Coals and sediments are bearing humic type organic matter, which have hydrogen indices (HI) of up to 300 mgHC/gTOC, indicating a certain content of liptinitic material. The stable carbon isotope ratios (δ13C) of the kerogen vary from −23.1 to −27.7‰. Air-free calculated gases contain hydrocarbons up to C5, carbon dioxide (<1%) and a considerable amount of nitrogen (up to 38%). The gaseous hydrocarbons are dominated by methane (>98%). The stable carbon isotope ratios of methane, ethane and propane are defined as δ13C1: −51.1 to −48.3‰, δ13C2: −37.9 to −25.3‰, δ13C3: −26.0 to −19.2 ‰, respectively. The δD1 values of methane range from −190 to −178‰. According to its isotopic composition, methane is a mixture, partly generated bacterially, partly thermogenic. Molecular and isotopic composition of the gases and organic geochemical properties of possible source rocks indicate that the thermogenic gas generation took place in coals and organic rich shales of the Westphalian-A Kozlu formation. The bacterial input can be related to a primary bacterial methane generation during Carboniferous and/or to a recent secondary bacterial methane generation. However, some peculiarities of respective isotope values of headspace gases can also be related to the desorption process, which took place by sampling.  相似文献   

19.
Equilibrium 2H/1H fractionation factors (αeq) for various H positions in alkanes, alkenes, ketones, carboxylic acids, esters, alcohols, and ethers were calculated between 0 and 100 °C using vibrational frequencies from ab initio QM calculations (B3LYP/6-311G**). Results were then corrected using a temperature-dependent linear calibration curve based on experimental data for Hα in ketones (Wang et al., 2009). The total uncertainty in reported αeq values is estimated at 10–20‰. The effects of functional groups were found to increase the value of αeq for H next to electron-donating groups, e.g. OR, OH or O(CO)R, and to decrease the value of αeq for H next to electron-withdrawing groups, e.g. (CO)R or (CO)OR. Smaller but significant functional group effects are also observed for Hβ and sometimes Hγ. By summing over individual H positions, we estimate the equilibrium fractionation relative to water to be −90‰ to −70‰ for n-alkanes and around −100‰ for pristane and phytane. The temperature dependence of these fractionations is very weak between 0 and 100 °C. Our estimates of αeq agree well with field data for thermally mature hydrocarbons (δ2H values between −80‰ and −110‰ relative to water). Therefore the observed δ2H increase of individual hydrocarbons and the disappearance of the biosynthetic δ2H offset between n-alkyl and linear isoprenoid lipids during maturation of organic matter can be confidently attributed to H exchange towards an equilibrium state. Our results also indicate that many n-alkyl lipids are biosynthesized with δ2H values that are close to equilibrium with water. In these cases, constant down-core δ2H values for n-alkyl lipids cannot be reliably used to infer a lack of isotopic exchange.  相似文献   

20.
Variations in the carbon isotopic composition (δ13C) of pristane, phytane, n-heptadecane (n-C17), C29 ααα 20R sterane, and aryl isoprenoids provide evidence for a diverse community of algal and bacterial organisms in organic matter of the Upper Ordovician Maquoketa Group of the Illinois Basin. Carbon isotopic compositions of pristane and phytane from the Maquoketa are positively covariant (r = 0.964), suggesting that these compounds were derived from a common source inferred to be primary producers (algae) from the oxygenated photic zone. A variation of 3‰ in δ13C values (−31 to −34‰) for pristane and phytane indicates that primary producers utilized variable sources of inorganic carbon. Average isotopic compositions of n-C17 (−32‰) and C29 ααα 20R sterane (−31‰) are enriched in 13C relative to pristane and phytane (−33‰) suggesting that these compounds were derived from a subordinate group of primary producers, most likely eukaryotic algae. In addition, a substantial enrichment of 13C in aryl isoprenoids (−14 to −18‰) and the identification of tetramethylbenzene in pyrolytic products of Maquoketa kerogen indicate a contribution from photosynthetic green sulfur bacteria to the organic matter. The presence of anaerobic, photosynthetic green sulfur bacteria in organic matter of the Maquoketa indicates that anoxic conditions extended into the photic zone.The δ13C of n-alkanes and the identification of an unusual suite of straight-chain n-alkylarenes in the m/z 133 fragmentograms of Ordovician rocks rich in Gloeocapsomorpha prisca (G. prisca) indicate that G. prisca did not contribute to the organic matter of the Maquoketa Group.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号