共查询到19条相似文献，搜索用时 156 毫秒
1.
非饱和土应力变量选取原则刍议 总被引：2，自引：0，他引：2
在非饱和土本构模型研究中,所选取的变量是否是非饱和土合适的应力变量往往被研究人员所忽视,这会阻碍本构模型的进一步发展。从土体的微观结构、能量守衡及力学平衡这3方面对非饱和土应力变量进行研究,以此提出了非饱和土应力变量选取应遵循的3个原则,强调指出非饱和土应力变量与应力状态变量的区别,并对本构模型研究中常用的应力变量进行分析,发现基质吸力、净法向应力并非为非饱和土应力变量,而有效应力和吸应力为其应力变量。建议使用有效应力来建立本构关系,其除了能满足文中提出的选取原则外,还能与饱和土理论之间有很好的过渡。文中的非饱和土应力变量选取原则还不成熟,但其重要性不容忽视,该研究还有待进一步补充和完善。 相似文献
2.
应力路径对土的强度和变形性质具有重要影响。相对于饱和土而言,控制吸力条件下的非饱和土三轴压缩状态的应力路径研究更加复杂。随着非饱和土本构理论的不断发展,理论和试验研究结果表明,非饱和土弹塑性本构模型可以用来近似地描述非饱和土的强度和变形性质。因而,运用非饱和土弹塑性本构模型对控制吸力条件下的3种非饱和土三轴压缩应力路径试验进行数值模拟是一种有效的理论研究手段。采用Barcelona模型能够对此类试验进行较好的数值模拟,其研究结果表明,在控制吸力条件的三轴压缩状态下应力路径对非饱和土的强度和变形性质具有重要影响。 相似文献
3.
非饱和土的本构模型研究 总被引：1，自引：0，他引：1
引用平均土骨架应力的概念,研究推导出非饱和土的刚度参数随吸力变化而变化的关系式,进而推导得到用平均土骨架应力表述的非饱和土LC屈服面函数以及硬化规律。从土力学原理推导,得到土样由于在净应力和吸力作用下产生体积变形引起土样饱和度变化的关系式。由平均土骨架应力推广,得到三轴应力状态的椭圆屈服函数,这一非饱和土本构模型的优点在于考虑了应力作用后土样饱和度的变化,通过对已有试验数据的初步验证,表明提出的非饱和土本构模型的合理性和适用性。 相似文献
4.
非饱和土的水力和力学特性及其弹塑性描述 总被引：6，自引：3，他引：3
简单回顾了非饱和土本构模型研究的发展历程,总结了近几年非饱和土弹塑性本构模型最新研究成果,重点介绍了能统一模拟非饱和土水力性状和力学性状耦合的弹塑性本构模型。通过对建立模型过程中的几个核心问题讨论,较详细地说明该类模型的结构、性能以及相关问题。非饱和土水力性状的滞回性用假定存在饱和度弹性区间的弹塑性过程来模拟;该类耦合模型不仅考虑了吸力对非饱和土水力性状和力学性状的影响,还考虑了饱和度对应力-应变关系和强度的影响以及土体变形对土-水特征曲线的影响。用同一套模型参数,耦合模型可统一预测在吸力控制或含水率控制下沿各种应力路径下非饱和土的水力-力学特性,并简单介绍了膨胀性非饱和土的弹塑性本构模型以及耦合模型在有限元数值计算中的应用。 相似文献
5.
《岩土力学》2020,(10)
地热资源开发与利用及核废料地质处理等诸多岩土工程问题,都需要考虑温度对饱和土和非饱和土应力、应变特性的影响。为了综合反映温度和吸力对土的先期固结压力的影响,提出了不同温度下土的先期固结压力的表达式。将此表达式与黏土–砂土统一状态参数模型屈服面相结合,考虑了温度和吸力对正常固结线及临界状态线的影响,提出了一个统一描述饱和–非饱和土温度效应的热–弹塑性本构模型。该模型分为饱和段(吸力小于某一温度下的进气值或排气值)与非饱和段(吸力大于某一温度下的进气值或排气值)。模型预测与试验数据的对比表明,该模型能够较好地定量描述不同温度下饱和土和非饱和土的应力、应变特性。 相似文献
6.
《岩土力学》2020,(2)
地热资源开发与利用及核废料地质处理等诸多岩土工程问题,都需要考虑温度对饱和土和非饱和土应力应变特性的影响。为了综合反映温度和吸力对土的先期固结压力的影响,首先提出了不同温度下土的先期固结压力的表达式。然后将此表达式与黏土–砂土统一状态参数模型屈服面相结合,考虑了温度和吸力对正常固结线及临界状态线的影响,提出了一个统一描述饱和–非饱和土温度效应的热–弹塑性本构模型。该模型分为饱和段（吸力小于某一温度下的进气值或排气值）与非饱和段（吸力大于某一温度下的进气值或排气值）。模型预测与试验数据的对比表明,该模型能够较好地定量描述不同温度下饱和土和非饱和土的应力、应变特性。 相似文献
7.
《岩土力学》2020,(2)
非饱和土应力-应变关系是土力学研究的重要领域。众多学者在非饱和土本构模型及其数值实现方面取得了大量研究成果,但在显示积分算法方面研究较少。在ABAQUS有限元平台基础上,应用带误差控制的显示积分算法,将一种扩展剑桥非饱和土本构模型编制成ABAQUS umat用户材料本构模型子程序,程序应用自动子增量步算法进行误差控制,采用改进欧拉法进行常微分方程显示求解。应用ABAQUS usdfld子程序将ABAQUS计算过程中饱和度及其增量保存为状态变量并导入umat进行耦合计算,使程序完全具备了进行非饱和土本构计算的能力。通过与ABAQUS自带饱和土本构模型的对比数值试验以及多种不同应力路径下的数值试验,验证了本构程序算法的正确性与合理性,相较于传统方法具有形式简洁、计算精度高、稳定性高等优点。最后运用扩展剑桥模型进行考虑水力滞回效应的土干湿循环数值试验,并分析了模型参数b对土干湿循环条件下不可逆累积变形的影响。结果表明,模型参数b对非饱和土干湿循环条件下的力学行为影响很大,b值越大不可逆累积变形越明显,b值越小则不可逆累积变形越小。所采用的误差控制自动子增量步显示积分算法在模拟非饱和土扩展剑桥模型时取得了良好效果,为后续研究打下坚实基础。 相似文献
8.
《岩土力学》2021,(2)
非饱和土应力应变关系是土力学研究的重要领域。众多学者在非饱和土本构模型及其数值实现方面取得了大量研究成果,但在显示积分算法方面研究较少。本文在Abaqus有限元平台基础上,应用带误差控制的显示积分算法,将一种扩展剑桥非饱和土本构模型编制成Abaqus umat用户材料本构模型子程序,程序应用自动子增量步算法进行误差控制,采用改进欧拉法进行常微分方程显示求解。应用Abaqus usdfld子程序将Abaqus计算过程中饱和度及其增量保存为状态变量并导入umat进行耦合计算,使程序完全具备了进行非饱和土本构计算的能力。通过与Anaqus自带饱和土本构模型的对比数值试验以及多种不同应力路径下数值试验,验证了本构程序算法的正确性与合理性,相较于传统方法具有形式简洁、计算精度高、稳定性高等优点。最后本文运用扩展剑桥模型进行考虑水力滞回效应的土干湿循环数值试验,并分析了模型参数b对土干湿循环条件下不可逆累积变形的影响,结果表明模型参数b对非饱和土干湿循环条件下的力学行为影响很大,b值越大不可逆累积变形越明显,b值越小则不可逆累积变形越小。本文采用的误差控制自动子增量步显示积分算法在模拟非饱和土扩展剑桥模型时取得了良好效果,为后续研究打下坚实基础。 相似文献
9.
10.
非饱和土本构模型在预测地表沉降中的应用 总被引：1，自引：0，他引：1
地下水位降低将导致非饱和土体中净平均应力和基质吸力发生变化,从而引起土体体积变化。利用GDS非饱和土三轴仪,研究了重塑非饱和黏土在干燥过程中试样含水率变化和总体积变化。针对某一典型基坑,运用大型有限元软件ABAQUS模拟了井点降水而形成的二维饱和-非饱和稳态渗流。饱和土区域和非饱和土区域沉降变形有着本质的区别,基于试验和数值模拟结果,根据Fredlund非饱和土弹性体变本构模型和饱和土有效应力原理,分别估算了饱和土区和非饱和土区沉降变形量。结果表明,在总沉降量中非饱和土区的沉降量是不可忽略的。随着降水深度的增大,非饱和土区域沉降量在总沉降量中所占比例将逐渐增大。 相似文献
11.
目前大多数非饱和土的弹塑性本构模型用非饱和击实土的试验结果进行验证,但现场其他类型的土,如沉积土经常有在非饱和状态下外部环境变化的情况。现有的非饱和土弹塑性模型是否适用于沉积土一类的现场土是需要研究的课题。进行非饱和上海第③层土的吸力控制排水排气三轴剪切试验,使用文中提出的能统一考虑非饱和土水力性状和力学性状的弹塑性本构模型,预测上述三轴试验结果,并与试验数据进行比较。比较结果显示,建立的本构模型能够很好地预测非饱和上海软土的水力和力学性质,说明该模型不仅可以适用击实土的预测,还能够很好地适用于其他类型非饱和土的水力和力学性质的模拟。 相似文献
12.
In the last decades, a number of hydro-mechanical elastoplastic constitutive models for unsaturated soils have been proposed. Those models couple the hydraulic and mechanical behaviour of unsaturated soils, and take into account the effects of the degree of saturation on the stress–strain behaviour and the effects of deformation on the soil–water characteristic response with a simple reversible part for the hysteresis. In addition, the influence of the suction on the stress–strain behaviour is considered. However, until now, few models predict the stress–strain and soil–water characteristic responses of unsaturated soils in a fully three-dimensional Finite Element code. This paper presents the predictions of an unsaturated soil model in a Three-dimensional Framework, and develops a study on the effect of partial saturation on the stability of shallow foundation resting on unsaturated silty soil. Qualitative predictions of the constitutive model show that incorporating a special formulation for the effective stress into an elastoplastic coupled hydro-mechanical model opens a full range of possibilities in modelling unsaturated soil behaviour. 相似文献
13.
Prediction of unsaturated soil behavior during earthquake loading has received increasing attention in geotechnical engineering research and practice in recent years. Development of a fully coupled analysis procedure incorporating a coupled hydromechanical elastoplastic constitutive model for dynamic analysis of unsaturated soils has, however, been limited. This paper presents the implementation of a coupled hydromechanical elastoplastic constitutive model into a fully coupled dynamic analysis procedure and its validation using a centrifuge test. First, the fully coupled finite element equations governing the dynamic behavior of unsaturated soils with the solid skeleton displacement, pore water pressure, and pore air pressure as nodal unknowns are briefly presented. The closest point projection method is then utilized to implement the coupled hydromechanical elastoplastic constitutive model into the finite element equations. The constitutive model includes hysteresis in soil–water characteristic curves, cyclic elastoplasticity of the solid skeleton, and the coupling mechanisms between the SWCCs and the solid skeleton. Finally, the analysis procedure is validated using the results from a dynamic centrifuge test on an embankment constructed of compacted unsaturated silt subjected to base shaking. Reasonable comparisons between the predicted and measured accelerations, settlements, and deformed shapes are obtained.
相似文献14.
在修正剑桥模型的基础上,提出了一个非饱和土毛细滞回与骨架变形耦合的弹塑性本构模型。该模型考虑了基质吸力与饱和度对屈服应力的影响,可以同时描述非饱和土的弹塑性变形特性与毛细循环滞回效应。根据塑性体变的产生使非饱和土进气值增大的特点,建立了变形对土-水特征曲线影响的数学描述。该模型有效地考虑了饱和度对前期屈服应力的作用,准确地反映了土体在不同土-水状态条件下（脱湿和吸湿过程）强度特性的变化,而且还可以有效地描述水力循环历史对土体变形的影响。通过与试验数据对比,证明了该模型能够模拟非饱和土的主要力学特性。 相似文献
15.
The Barcelona basic model (BBM) successfully explained many key features of unsaturated soils and received extensive acceptance. It is also one of the few elastoplastic constitutive models for unsaturated soils that have been implemented within finite element codes and applied to the analysis of real boundary value problems. The BBM was proposed in incremental forms according to theories of soil plasticity in which individual aspects of the isotropic virgin behavior are controlled by multiple parameters, whereas at the same time, a single parameter controls more than one aspect of soil behavior. Although a variety of methods have been recently developed for calibrating model parameters for elastoplastic soil models, at present, there are no well‐established, simple, and objective methods for selecting parameter values in the BBM from laboratory tests. This has been one of the major obstacles to the dissemination of this constitutive model beyond the research context. This article presents an optimization approach especially developed for simple and objective identification of material parameters in the BBM. This is achieved by combining a modified state surface approach, recently proposed to model the elastoplastic behavior of unsaturated soils under isotropic stress conditions, with the Newton or quasi‐Newton method to simultaneously determine the five parameters governing isotropic virgin behavior in the BBM. The comparison between results using the proposed method and an existing method for the same laboratory tests was discussed from which the simplicity and objectivity of the proposed method were evaluated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
16.
17.
以饱和度与有效应力为状态变量,通过引入描述不饱和与饱和土孔隙比差的状态变量,将Zhang等提出的饱和土体应力诱导各向异性动弹塑性本构模型推广到不饱和土体中,使其可描述不饱和土在动力循环荷载作用下的力学特性行为。通过对已有不饱和土体在完全不排水条件下的动三轴试验进行理论模拟,验证了所提出不饱和土本构模型的正确性。最后基于所提出本构模型,讨论了在不排水条件下初始饱和度对不饱和土动力特性研究。结果表明,不饱和土在动力荷载作用下,土体的孔隙比将减少,导致饱和度增加;当初始饱和度较高时,不饱和土会转化为饱和土,从而发生液化现象。该研究成果对研究不饱和土在地震等动力荷载作用下的力学特性行为具有重要意义。 相似文献
18.
Several researchers have reported that the mean effective stress of unsaturated soils having a relatively high degree of saturation gradually decreases under fully undrained cyclic loading conditions, and such soils can be finally liquefied like saturated soils. This paper describes a series of simulations of fully undrained cyclic loading on unsaturated soils, conducted using an elastoplastic model for unsaturated soils. This model is a critical state soil model formulated using effective stress tensor for unsaturated soils, which incorporates the following concepts: (a) the volumetric movement of the state boundary surface containing the critical state line owing to the variation in the degree of saturation; (b) the soil water characteristic curve considering the effects of specific volume and hydraulic hysteresis; and (c) the subloading surface concept for considering the effect of density. Void air is assumed to be an ideal gas obeying Boyle's law. The proposed model is validated through comparisons with past results. The simulation results show that the proposed model properly describes the fully undrained cyclic behavior of unsaturated soils, such as liquefaction, compression, and an increase in the degree of saturation. Finally, the effects of the degree of saturation, void ratio, and confining pressure on the cyclic strength of unsaturated soils are described by the simulation results. The liquefaction resistance of unsaturated soils increases as the degree of saturation and the void ratio decrease, and as the confining pressure increases. Furthermore, the degree of saturation has a greater effect on the liquefaction resistance than the confining pressure and void ratio. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
19.
Mahnoosh Biglari Claudio Mancuso Anna d’Onofrio Mohammad Kazem Jafari Ali Shafiee 《Computers and Geotechnics》2011
Existing models for predicting the small strain behaviour of unsaturated soil are not capable of predicting the initial shear stiffness during suction reduction under normally consolidated conditions. This problem has been addressed in the present study by combining an existing elastoplastic model and recent experimental data to provide a new model for the initial shear stiffness. The model, which is similar to that typically adopted for saturated soils, uses the average skeleton stress and an additional function of the degree of saturation. This new model not only captures the behaviour of the new experimental results, but it also describes a unique relationship between saturated and unsaturated soils. 相似文献