共查询到20条相似文献，搜索用时 46 毫秒
1.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive. 相似文献
2.
水下加筋圆柱壳结构声散射特性研究 总被引：1，自引：0，他引：1
采用有限元/边界元(FEM/BEM)方法对水下加筋圆柱壳结构的声散射特性进行分析。考虑入射声场激发弹性结构振动产生二次辐射声场,总声场为入射场与散射场之和。基于Mindlin理论建立结构受迫振动的有限元模型,考虑入射声场为简谐激励,采用模态叠加法求出结构振动表面速度。根据声学边界元相关理论,利用有限元方法计算得出的弹性结构表面动力相应,可求出弹性结构的散射声场。研究结果表明,在同一波数下,不加筋结构后向散射强于加筋结构;加筋结构的散射指向性图案分叉较为明显;同种结构在波数增加的时候后向散射强度逐渐增大,前向散射强度逐渐减弱。 相似文献
3.
After borrowing the idea of precise integration method, a precise integration transfer matrix method (PITMM) is proposed by modifying traditional transfer matrix method. The submarine hull can be modeled as joined conicalcylindrical-spherical shells. By considering the effect of the ring-stiffeners, the field transfer matrixes of shells of revolution are obtained accurately by PITMM. After assembling the field transfer matrixes into an entire matrix, the dynamic model is established to solve the dynamic responses of the joined shell. By describing the sound pressure in fluid by modified wave superposition method (MWSM) and collocating points along the meridian line of the joined shell, finally the structural and acoustic responses of a finite stiffened submarine hull can be predicted by coupled PITMM and MWSM. The effectiveness of the present method has been verified by comparing the structural and acoustic responses of the spherical shell with existing results. Furthermore, the effects of the model truncation, stiffness and thickness on the structural and acoustic responses of the submarine hull are studied. 相似文献
4.
5.
Flexible marine risers are commonly used in deepwater floating systems.Bend stiffeners are designed to protect flexible risers against excessive bending at the connection with the hull.The structure is usually analyzed as a cantilever beam subjected to an inclined point load.As deflections are large and the bend stiffener material exhibits nonlinear stress-strain characteristics,geometric and material nonlinearities are important considerations.A new approach has been developed to solve this nonlinear problem.Its main advantage is its simplicity;in fact the present method can be easily implemented on a spreadsheet.Finite element analysis using ABAQUS is performed to validate the method.Solid elements are used for the bend stiffener and flexible pipe.To simulate the near inextensibility of flexible risers,a simple and original idea of using truss elements is proposed.Through a set of validation studies,the present method is found to be in a good agreement with the finite element analysis.Further,parametric studies are performed by using both methods to identify the key parameters and phenomena that are most critical in design.The most important finding is that the common practice of neglecting the internal steel sleeve in the bend stiffener analysis is non-conservative and therefore needs to be reassessed. 相似文献
6.
为建立海洋电缆弯曲加强器参数化设计方法,使用有限元模型进行了弯曲加强器设计参数研究.基于海缆及其弯曲加强器的几何结构及受力特点,建立了基于多相耦合梁单元的平面有限元模型,可以计算并分析海缆及其弯曲加强器在一定角度的张力作用下的形变与等效应力分布.通过多个案例系统性地分析了弯曲加强器的主要设计参数,即根部直径、锥体段长度及材料弹性模量,对海缆弯曲挠度、曲率及等效应力分布的影响.文中原创性地提出了弯曲加强器组合设计参数φ(t,L,E).通过定量分析确定了其与海缆最大曲率之间的近似线性关系,并由此设计了参数化的弯曲加强器设计流程.通过设计实例验证了组合参数与海缆最大曲率之间关系的准确性和参数化设计流程的有效性. 相似文献
7.
This work describes the theoretical modal analysis model for the stiffened bottom plate of a tank that is filled with fluid having an undisturbed free surface. In the analysis model, the effects of bending, transverse shear and rotary inertia in both the plate and the stiffener are considered. Analytical results concerning the natural frequencies of the stiffened plate correlate well with experimental modal testing (EMT) results for above the second mode. To overcome the complexities in the modal analysis of the fluid–structure interaction, the Mindlin plate theory and the potential flow theory are applied; the velocity potential is also expressed using double finite Fourier transforms. Additionally, a parametric study was also performed for eigenfrequencies of the plate with a stiffener, in terms of the ratio of the depth of the stiffener to the thickness of the plate and that of the width of the stiffener to the thickness of the plate. Analysis results revealed the phenomenon of “mode reversal”, i.e. the first and second mode shapes of the plate with a deep stiffener in contact with air and water, respectively, are reversed. An occurring condition of “mode reversal” is derived and verified by both finite element analysis and EMT. 相似文献
8.
轮印载荷的分布对于直升机甲板加筋板结构的设计至关重要。通过在橡胶块上加压的方式模拟轮印载荷,直接测量橡胶块与加筋板结构之间的接触压力,揭示轮印载荷分布特性,得到轮印载荷在加强筋和铺板之间的分布具有较强的不均匀性。利用ABAQUS软件进行轮印载荷分布的数值计算,结果表明,数值计算结果与试验结果吻合较好,试验工况下分布在加强筋上均布轮印载荷为接触面上均布轮印载荷的1.279倍。研究了加筋板面板初始缺陷、加强筋高度以及加筋板面板厚度对轮印载荷分布的影响。数值结果表明:考虑面板初始缺陷、降低面板厚度和增加加强筋的高度使轮印载荷分配到加强筋上的比例增大,但在相对刚度变化相同的情况下,降低面板厚度和增加加强筋高度对轮印载荷分布的影响不同。 相似文献
9.
Based on the finite displacement theory of elastic shells, the postbuckling behaviour of submarine pipelines with residual stresses is investigated by using a new finite element formula. The corresponding complementary energy functional is first constructed, and then a geometrical stiffness matrix suitable for the postbuckling of a cylindrical shell is derived. In this matrix the effects of initial stresses and harmonic coupling terms have been considered. The formulation presented in this paper can be used to solve a significant class of problems in the analysis of elastic shells. 相似文献
10.
环肋圆柱壳体在水下冲击波作用下的动力弹塑性屈曲 总被引：1，自引：0，他引：1
本文以加肋圆柱壳体为对象建立力学模型，在水下爆炸产生的冲击波作用下，考虑流体与结构的耦合效应，研究加肋圆柱壳体的弹塑性失稳变形量及动力响应特性。数值分析显示出的最终变形形状和压力变化过程与实验资料一致的 相似文献
11.
The failure of a ship hull girder is governed by buckling and plastic collapse of the deck, bottom and side shell steel stiffened plates. The stiffened steel plating in ships is generally subjected to both in-plane and out-of-plane loading and is more important to understand the characteristics of these panels under buckling. Tests are reported on the collapse load of stiffened plates with and without cutout and with reinforced cutout under uniaxial compression. A generalized computer program for the semi-analytical solutions proposed by various investigators based on strut approach and orthotropic plate approach, and a finite element analysis program based on orthotropic plate approach are developed. The panels are also analysed using the finite element analysis software ANSYS. An approximate method based on strut approach is proposed to calculate the collapse load of stiffened plates with cutouts and initial imperfections. The reduction in strength of the panels due to the presence of square cutout, rectangular cutout and increase in strength due to reinforcement around rectangular cutout are calculated based on the test results. Comparisons are made between the test results and predictions based on semi-analytical solutions and finite element analyses, and the uncertainty parameters calculated are discussed. Based on this study it is concluded that the cutout can be reinforced with a maximum increase in strength up to 19% for plate initiated failures. 相似文献
12.
13.
A stiffened plate is one of the principal structural components of the hull. During the design phase it is useful to study this structure considering it as a system consisting of monodimensional elements. Therefore, it is appropriate to identify the plate breadth that collaborates with the stiffener in the simplified calculation.The aim of this work is to investigate the effective breadth, regarding both stiffness and strength. The analysis is performed comparing various numerical solutions supplied by a finite-element program with solutions based on the beam theory. Analytic expressions and graphs, derived from the results of the parametric investigation, are proposed to design this kind of structure. 相似文献
14.
船舶与海洋结构在服役期间会遭受电化学和微生物侵蚀等多种腐蚀环境影响,加筋板作为此类结构的主要受力构件,其表面易产生不规则形态的点蚀,引起构件的强度退化。利用ANSYS有限元软件构建加筋腹板遭受随机点蚀损伤的加筋板有限元模型,研究带板长宽比、带板长细比、加筋长细比和腐蚀体积损失率对加筋板极限强度的影响。研究结果表明,加筋遭受同等腐蚀体积损失率下,带板长宽比变化对极限强度退化的影响很小,但带板长细比和加筋长细比变化产生的影响明显;带板长细比越大,极限强度退化越严重,而加筋长细比越大,极限强度退化反而越小。针对文中研究的加筋板,当加筋长细比为 0.2时,腐蚀体积率为14%的随机点蚀导致结构极限强度退化程度达到约14.0%。因此,加筋的随机点蚀损伤会显著削弱加筋板结构的极限强度,其影响不可忽略。 相似文献
15.
16.
周向变刚度环肋圆柱壳应力分析研究 总被引：1，自引：0，他引：1
采用大曲率梁理论和弹性基础梁带理论,建立潜艇特殊舱段结构的力学模型。利用能量法求出肋位处耐压船体壳板中面周向应力。建立环肋圆柱壳微分方程并根据边界条件求解,得到周向变刚度环肋圆柱壳应力计算方法。通过理论分析和模型试验验证了本计算方法。 相似文献
17.
为了研究循环载荷作用下扶强材初始损伤对其极限强度的影响,进行了14组扶强材的循环加载试验和分析。构造了考虑材料累积损伤完整、断筋和大变形的扶强材单元极限承载力计算公式,提出了相应循环载荷作用下损伤扶强材单元的端缩曲线表达式和船体梁极限强度计算的简化逐步破坏法。编制了循环载荷作用下船体梁损伤极限强度计算程序,进行了船体梁极限强度计算,并与有限元结果进行对比。研究结果表明：改进的损伤扶强材模型可较为准确地描述扶强材材料损伤的完整、断筋和大变形的极限承载力退化情况,扶强材腹板断裂的损伤相较初始大变形及材料累积损伤形式承载力下降程度更明显;所提出的循环载荷作用下损伤船体梁极限强度计算的简化逐步迭代方法,能定量地计算扶强材在不同类型损伤下的极限承载力退化程度,具有较高精度,方便易行,可应用于工程设计。 相似文献
18.
Shen Huishen
Professor 《中国海洋工程》1996,(4)
- posthuckling analysis is presented for the stilTened cylindrical shell of finite length subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, nonlinear large deflections in the postbuckling range and initial geometrical imperfections of the shell. The "smeared stifl'cner" approach is adopted for the stiffencrs. In the analysis a singular perturbation technique is used (o determine the interactive buckling loads and the postbuckling paths. Numerical examples cover the performance of perfect and imperfect, stringer and ring stiffened cylindrical shells. Typical results arc presented in the dimcnsionless graphical form. 相似文献
19.
胶州湾双壳类壳体中的Ca,Mg,Mn,Sr元素组成及影响因素 总被引：1，自引：0，他引：1
探讨影响双壳类元素组成的可能因素,从胶州湾沿岸不同取样点采集黄海近海常见的菲律宾蛤仔(Ruditapesphilippinarum)、褶牡蛎(Oystrea denselamellosa)和紫贻贝(Mytilus galloprovincialis),分别测量了3种壳体的矿物物相类型和壳体中的Ca,Mg,Mn,Sr元素组成。研究表明:3种壳体分别属于文石质、方解石质和混合质壳;Ca,Mn元素含量在菲律宾蛤仔、褶牡蛎和紫贻贝壳体中没有差别,而Mg元素含量在菲律宾蛤仔壳体中含量较低,在褶牡蛎壳体和紫贻贝壳体中含量较高,Sr元素恰好与Mg元素相反。双壳类壳体中元素组成主要受壳体矿物物相类型的制约,而与水体环境要素之间的关系弱。 相似文献
20.
A new stiffened plate element is developed for the three-dimensional finite element analysis of ship structures. The plate element can accommodate any number of arbitrarily oriented stiffeners and obviates the use of mesh lines along the stiffeners. The new element provides a very economic global analysis of the complete ship structure with fewer elements and without any loss of accuracy. The global analysis of a rectangular box shaped vessel is carried out with the present element and compared with the general-purpose finite element software NISA. An Offshore Tug/Supply Vessel is analysed for crest at perpendiculars. 相似文献