共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
José R.M. de Sousa Carlos Magluta Ney Roitman Gilberto B. Ellwanger Edison C.P. Lima Arnaldo Papaleo 《Applied Ocean Research》2009,31(3):157-170
Even though hydraulic collars are largely used to install flexible risers, neither the loads imposed by this equipment nor the response of the risers to these loads have been previously studied. Hence, this paper presents a three-dimensional nonlinear finite element (FE) model to predict the response of flexible risers to loads imposed by hydraulic collars and also provides a set of equations to predict these loads. The FE model relies on an analogy between helical tendons and orthotropic shells to simulate the inner carcass and the pressure armour of flexible risers. Shell elements are used to represent the polymeric layers and three-dimensional beam elements simulate the wires of the tensile armours. Material, geometric and contact nonlinearities are addressed. Contact interactions between the layers of the riser are handled by surface to surface contact elements with a contact detection algorithm based on the pinball technique and contact forces evaluated with the augmented Lagrangian method. A 9.5″ flexible riser is analyzed and the numerical results are compared to those from the experimental tests. The agreement between all results indicates that the proposed FE model is an efficient approach to predict the response of flexible risers to loads imposed by hydraulic collars and, moreover, may be used to analyze the response of such structures to other types of loads. 相似文献
3.
Bend stiffeners are essential components of a flexible riser system, employed to ensure a smooth transition at the upper connection and to protect the riser against over bending and from accumulation of fatigue damage. The highly nonlinear rate dependent behavior of these structures directly affects the integrity assessment of the riser in one of its most critical regions, the top connection. A steady-state formulation (disregarding inertial forces) and numerical solution procedure is developed in this work employing the perturbation method for a nonlinear viscoelastic bend stiffener large deflection beam model subjected to harmonic loading conditions. For stochastic loading conditions, the response is calculated employing the superposition principle by summing up the steady-state result of a number of individual frequency components. A time domain formulation is also derived employing the state-variable approach for the numerical solution of the resulting hereditary integral in the governing equations. A case study is presented for the top connection system of a 4″ ID flexible riser using relaxation and tensile experimental data obtained from a typical class of bend stiffener polyurethane. Harmonic and stochastic input loading conditions are employed for time and frequency domain model comparison/validation and to assess loading history and frequency influence in the curvature response. 相似文献
4.
The flexible riser top connection is a critical region for lifetime assessment due to large tension/curvature variations and modeling uncertainties. The bend stiffener polyurethane mechanical response not only presents a nonlinear loading rate and temperature dependency but is also subjected to weather ageing during operation, which may affect its mechanical behavior over time. The top tension, employed for riser local cross-section stress calculation, is usually obtained from global dynamic analyses performed under selected environmental conditions, if direct measurement is not available. As a consequence, both the bend stiffener effect on the curvature distribution and the top tension time series present inherent uncertainties for riser lifetime (re)assessment. In the present work, a proposed monitoring approach composed by gyrometers installed along flexible riser/bend stiffener top connection system length combined with an inverse problem methodology is numerically investigated to estimate the following parameters: (i) polyurethane hyperelastic response and (ii) effective top tension. The top connection system is modeled using a large deflection beam bending model and the parameters are estimated using a damped least-square minimization approach with the Levenberg–Marquardt algorithm. For the preliminary feasibility investigation, the gyrometer experimental data is numerically estimated through Monte Carlo simulations. A case study is carried out to investigate the influence that the number of sensors, sensors arrangement, loading conditions and top connection model have on the inverse parameters estimation. The results indicate that the proposed monitoring approach and inverse parameter estimation methodology may effectively reduce flexible riser lifetime calculation uncertainties. 相似文献
5.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers（SCRs） using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis（FEA）, we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
6.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers (SCRs) using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis (FEA), we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
7.
A. K. Jain 《Ocean Engineering》1994,21(8)
The anchorage system for mid-ocean loading or production consists of an articulated tower for mooring the tanker. Flexible risers are also essential components of the anchorage system. The present paper provides a state-of-the-art review on articulated storage systems and flexible risers, giving theoretical background for the development of computer software for the static analysis of flexible risers.In the state-of-the-art review for flexible risers, various analysis techniques for elastic lines and flexible risers under self-weight, current and wave forces are presented. The dynamic response of the flexible riser, including vortex-induced oscillations, is also outlined.The literature concerning the articulated tower and tanker is relatively scarce. Available works related only to dynamic responses of articulated towers. The combined response of tower and tanker is only studied by Chakrabarti and Cotter [(1978), Analysis of a tower-tanker system. In Proceedings of the 10th Offshore Technology Conference, OTC 3202, pp. 1301–1310] in a limited sense. The review of these works is summarised relevant to this paper.In the end, the static analysis of the flexible riser under its self-weight and current is presented using a finite difference approach. The problem essentially involves geometrical non-linearity, which is tackled with the help of an iterative solution based on modified Newton-Raphson technique. The theoretical formulation presented is being used to develop the computer software for the static analysis of the flexible risers. 相似文献
8.
Static analysis of stiffened shells has been carried out using an eight-noded isoparametric element for the shell and a three-noded curved beam element for the stiffener. A same displacement function is used for the shell and the stiffener elements. A modified technique has been followed to analyse the shell, which is an improvement over the degenerated shell concept. The stiffness matrix of the curved beam element is generated irrespective of its position and orientation within the shell element. The stiffness matrix of the stiffener is then transferred to all the nodes of the shell element. Numerical examples of stiffened shells with concentric and eccentric stiffeners have been analysed and the results presented together with those available in published literature. 相似文献
9.
This paper proposes an enhanced approach for evaluating the fatigue life of each metallic layer of unbonded flexible risers. Owing to the complex structure of unbonded flexible risers and the nonlinearity of the system, particularly in the critical touchdown zone, the traditional method is insufficient for accurately evaluating the fatigue life of these risers. The main challenge lies in the transposition from global to local analyses, which is a key stage for the fatigue analysis of flexible pipes owing to their complex structure. The new enhanced approach derives a multi-layer stress-decomposition method to meet this challenge. In this study, a numerical model validated experimentally is used to demonstrate the accuracy of the stress-decomposition method. And a numerical case is studied to validate the proposed approach. The results demonstrate that the multi-layer stress-decomposition method is accurate, and the fatigue lives of the metallic layers predicted by the enhanced multi-layer analysis approach are rational. The proposed fatigue-analysis approach provides a practical and reasonable method for predicting fatigue life in the design of unbonded flexible risers. 相似文献
10.
This paper proposes an enhanced approach for evaluating the fatigue life of each metallic layer of unbonded flexible risers. Owing to the complex structure of unbonded flexible risers and the nonlinearity of the system, particularly in the critical touchdown zone, the traditional method is insufficient for accurately evaluating the fatigue life of these risers. The main challenge lies in the transposition from global to local analyses, which is a key stage for the fatigue analysis of flexible pipes owing to their complex structure. The new enhanced approach derives a multi-layer stress-decomposition method to meet this challenge. In this study, a numerical model validated experimentally is used to demonstrate the accuracy of the stress-decomposition method. And a numerical case is studied to validate the proposed approach. The results demonstrate that the multi-layer stress-decomposition method is accurate, and the fatigue lives of the metallic layers predicted by the enhanced multi-layer analysis approach are rational. The proposed fatigue-analysis approach provides a practical and reasonable method for predicting fatigue life in the design of unbonded flexible risers. 相似文献
11.
为了研究循环载荷作用下扶强材初始损伤对其极限强度的影响,进行了14组扶强材的循环加载试验和分析。构造了考虑材料累积损伤完整、断筋和大变形的扶强材单元极限承载力计算公式,提出了相应循环载荷作用下损伤扶强材单元的端缩曲线表达式和船体梁极限强度计算的简化逐步破坏法。编制了循环载荷作用下船体梁损伤极限强度计算程序,进行了船体梁极限强度计算,并与有限元结果进行对比。研究结果表明：改进的损伤扶强材模型可较为准确地描述扶强材材料损伤的完整、断筋和大变形的极限承载力退化情况,扶强材腹板断裂的损伤相较初始大变形及材料累积损伤形式承载力下降程度更明显;所提出的循环载荷作用下损伤船体梁极限强度计算的简化逐步迭代方法,能定量地计算扶强材在不同类型损伤下的极限承载力退化程度,具有较高精度,方便易行,可应用于工程设计。 相似文献
12.
In re-entry,the drilling riser hanging to the holding vessel takes on a free hanging state,waiting to be moved from the initial random position to the wellhead.For the re-entry,dynamics calculation is often done to predict the riser motion or evaluate the structural safety.A dynamics calculation method based on Flexible Segment Model(FSM) is proposed for free hanging marine risers.In FSM,a riser is discretized into a series of flexible segments.For each flexible segment,its deflection feature and external forces are analyzed independently.For the whole riser,the nonlinear governing equations are listed according to the moment equilibrium at nodes.For the solution of the nonlinear equations,a linearization iteration scheme is provided in the paper.Owing to its flexibility,each segment can match a long part of the riser body,which enables that good results can be obtained even with a small number of segments.Moreover,the linearization iteration scheme can avoid widely used Newton-Rapson iteration scheme in which the calculation stability is influenced by the initial points.The FSM-based dynamics calculation is timesaving and stable,so suitable for the shape prediction or real-time control of free hanging marine risers. 相似文献
13.
14.
Discrete Element with Flexible Connector for Dynamic Analysis of 3-D Beam Structures 总被引：1，自引：1，他引：1
Combined multi-body dynamics with structural dynamics,a new discrete element with flexibleconnector,which is applicable for 3-D beam structures,is developed in this paper.Both the generalizedelastic coefficient matrix of the flexible connector and the mass matrix of discrete element may be off-diag-onal in a general case.The zero-length rigid element is introduced to simulate the node at which multiple el-ements are jointed together.It may also be effective when the axes of adjacent elements are not in the sameline.The examples for eigenvalue calculation show that the model is successful.It can be extended to thegeometric nonlinear response analysis. 相似文献
15.
Ingo Drummen MingKang Wu Miroslaw Lech Kaminski Torgeir Moan 《Ocean Engineering》2009,36(15-16):1208-1216
Previous studies of response conditioned wave methods have been focused on their applicability to the prediction of extreme nonlinear wave-induced load effects. The results showed that theses methods can be used to accurately and efficiently predict the nonlinear short-term probability distributions for rigid hull responses. This has led us to investigate how response conditioned wave methods can be used for long-term nonlinear fatigue analyses, and with which accuracy this can be done. In this paper we present the results from our investigation. The studies were performed using a container vessel with a length between perpendiculars of 281 m. Calculations were done with a nonlinear strip theory method in which the hull of the vessel was assumed to be rigid. The most likely response wave (MLRW) method was used to condition the waves. Only head seas were considered. We found that the MLRW method under-predicted the long-term fatigue damage by 3%. The method, however, required a simulation time that was approximately three orders of magnitude less than that required for a conventional long-term nonlinear analysis based on random irregular waves. A preliminary investigation showed that due to lacking springing and whipping contributions the MLRW method under-predicted the fatigue damage for a flexible hull by approximately 50%. Several comments about a more accurate extension of the proposed method to flexible hulls are included. 相似文献
16.
Chen Jiajing Wang Dongjiao Professor South China University of Technology Guangzhou PhD Student Hong Kong Polytechnic Formerly South China University of Technology Guangzhou 《中国海洋工程》1991,(4)
A nonlinear dynamic analysis model is estabilished on the basis of "lumped mass" approach, which takes the influence of the fluid flow within the pipe into consideration. Numerical results are compared with the published works, and the effects of internal fluid flow, internal pressure, dyanmics as well as the nonlinear characteristics on the behavior of flexible risers are discussed. From this work, some useful conclusions are drawn. 相似文献
17.
This work describes the theoretical modal analysis model for the stiffened bottom plate of a tank that is filled with fluid having an undisturbed free surface. In the analysis model, the effects of bending, transverse shear and rotary inertia in both the plate and the stiffener are considered. Analytical results concerning the natural frequencies of the stiffened plate correlate well with experimental modal testing (EMT) results for above the second mode. To overcome the complexities in the modal analysis of the fluid–structure interaction, the Mindlin plate theory and the potential flow theory are applied; the velocity potential is also expressed using double finite Fourier transforms. Additionally, a parametric study was also performed for eigenfrequencies of the plate with a stiffener, in terms of the ratio of the depth of the stiffener to the thickness of the plate and that of the width of the stiffener to the thickness of the plate. Analysis results revealed the phenomenon of “mode reversal”, i.e. the first and second mode shapes of the plate with a deep stiffener in contact with air and water, respectively, are reversed. An occurring condition of “mode reversal” is derived and verified by both finite element analysis and EMT. 相似文献
18.
Unbonded flexible pipes have superior fatigue performance as the internal armor layers are allowed to move relative to each other, leading to reduced structural loading. The main interactions between the internal layers are the contact forces and the frictional forces. Frictional interaction leads to a complex non-linear response of unbonded flexible pipes making prediction of cyclic bending fatigue a demanding task. Nevertheless, detailed understanding of local armor wire stresses and the related fatigue phenomena is of paramount importance as unbonded flexible risers are often operated close to their mechanical limits. This paper presents a method for calculating the tensile armor wire loading and the hysteresis effect on flexible pipes when subjected to tension, and non-symmetric cyclic bending. The effect of non-symmetric cyclic bending with different tensile armor lay angles, and frictional conditions are studied. The analysis uses an efficient repeated unit cell finite element model, allowing the analysis to be performed on a desktop computer. The study shows that the tensile armor wires gradually translate towards the compression side of the pipe bending plane, when the unbonded flexible pipe is subjected to combined tension and non-symmetric cyclic bending. In the analysis, cyclic bending is applied until steady-state in the bending response is achieved over a full bending cycle. The global bending response of the flexible pipe and the tensile armor wire loading conditions for fully stabilized non-symmetric cyclic bending become symmetric around the frictionless state for the mean cyclic bending curvature. An approximate analytic model for the tensile armor in the stabilized cycle, based on symmetric bending about the geodesic curve corresponding to the mean pipe curvature, is proposed. 相似文献
19.
采用卷管法进行海底管道铺设过程中,管道首先通过牵引作用上卷于卷筒进行储存。管道与卷筒发生非线性接触,可能会产生复杂的塑性变形和局部屈曲。通过全尺寸柔性管力学性能试验获得柔性管轴力—应变以及弯曲—曲率等非线性力学性能关系,将试验所得的非线性材料性能参数导入建立的两种柔性管上卷ABAQUS有限元模型（梁—实体单元模型与壳和桁架—实体单元模型）,实现柔性管较大轴向抗拉刚度和较小抗弯刚度的同步模拟以及管道与卷筒的非线性接触响应特征。通过对比分析两种有限元模型数值模拟得到的管道弯矩、弯曲曲率、管道轴力、管道与卷筒的接触压强等数据,发现在管道上卷过程中管道沿副法线方向的SM3弯矩占据其弯曲变形主导地位;管道与卷筒之间的摩擦效应对于管道轴力的影响较为显著;管道与卷筒的最大接触压强主要发生在卷管过渡段区域。 相似文献
20.
考虑钢悬链线立管大变形的特性以及内流的影响,利用Kane方法和拉格朗日应变理论建立钢悬链线立管的二维动力学模型。将顶部浮体的激励简化为一个沿顺流向的周期作用力施加于立管顶部,采用平均加速度法求解立管的动力响应。探讨顶部浮体不同激励频率下立管的非线性动力响应以及内流流速的大小对管道共振响应幅值的影响。 相似文献