共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
Owing to nonlinear contact problems with slip and friction, a lot of limiting assumptions are made when developing analytical models to simulate the behavior of an unbonded flexible riser. Meanwhile, in order to avoid convergence problems and excessive calculating time associated with running the detailed finite element （FE） model of an unbonded flexible riser, interlocked carcass and zeta layers with complicated cross section shapes are replaced by simple geometrical shapes （e.g. hollow cylindrical shell） with equivalent orthotropic materials. But the simplified model does not imply the stresses equivalence of these two layers. To solve these problems, based on ABAQUS/Explicit, a numerical method that is suitable for the detailed FE model is proposed. In consideration of interaction among all component layers, the axial stiffness of an eight-layer unbonded flexible riser subjected to axial tension is predicted. Compared with analytical and experimental results, it is shown that the proposed numerical method not only has high accuracy but also can substantially reduce the calculating time. In addition, the impact of the lay angle of helical tendons on axial stiffness is discussed. 相似文献
3.
The effect of nonlinear multi-contact coupling with gap between risers and guide frames on global spar motion analysis 总被引：1，自引：0，他引：1
Nonlinear multi-contact coupling between vertical risers and guide frames inside the spar moon-pool is studied. The existing numerical model for hull/mooring/riser coupled dynamics analysis treats riser as an elastic rod truncated at the keel (truncated riser model), and the risers are free to slide in vertical direction with constant tension, while restricted in horizontal direction. The truncated riser model neglects the portion of the riser inside the moon-pool and tends to overestimate the spar pitch motion. In the newly developed model, the risers are extended through the moon-pool with realistic boundary conditions at multiple guide frames, and thus additional contact forces and moments on the spar hull are considered. The gap effects between the riser buoyancy-cans and riser guide frames are also modeled using three different types of gap springs. Their different dynamic characteristics are extensively studied. The new riser model also considers the Coulomb damping between buoyancy-cans and riser guide frames and also allows the impact-like contact force calculation on risers for ensuring fatigue analysis. 相似文献
4.
基于ABAQUS/AQUA模块,当Spar平台发生涡激运动时,对与平台相连接的柔性立管进行时域动态响应分析,得到了不同折合速度下柔性立管的应力响应曲线.对立管触地区域和悬垂段进行了细化的分析,并利用S-N曲线和Miner线性累积损伤理论对平台涡激运动引起的柔性立管疲劳损伤进行了计算.研究结果表明:平台涡激运动对立管触地区域和悬垂段的影响较大,这两部分最容易在长时间的工作中产生疲劳损伤.特别是平台运动到近点时,立管触地区域受到的应力急剧增加,这个区域是立管工作的危险区域,应该特别注意.该研究结论可以作为立管结构设计和海底铺设时的参考,通过增加立管触地区域的结构强度和优化铺设方式,从而来提高立管的疲劳寿命和系统的安全性. 相似文献
5.
This paper presents analytical and numerical models to predict the behavior of unbonded flexible risers under torsion. The analytical model takes local bending and torsion of tensile armor wires into consideration, and equilibrium equations of forces and displacements of layers are deduced. The numerical model includes lay angle, cross-sectional profiles of carcass, pressure armor layer and contact between layers. Abaqus/Explicit quasi-static simulation and mass scaling are adopted to avoid convergence problem and excessive computation time caused by geometric and contact nonlinearities. Results show that local bending and torsion of helical strips may have great influence on torsional stiffness, but stress related to bending and torsion is negligible; the presentation of anti-friction tapes may have great influence both on torsional stiffness and stress; hysteresis of torsion-twist relationship under cyclic loading is obtained by numerical model, which cannot be predicted by analytical model because of the ignorance of friction between layers. 相似文献
6.
A. K. Jain 《Ocean Engineering》1994,21(8)
The anchorage system for mid-ocean loading or production consists of an articulated tower for mooring the tanker. Flexible risers are also essential components of the anchorage system. The present paper provides a state-of-the-art review on articulated storage systems and flexible risers, giving theoretical background for the development of computer software for the static analysis of flexible risers.In the state-of-the-art review for flexible risers, various analysis techniques for elastic lines and flexible risers under self-weight, current and wave forces are presented. The dynamic response of the flexible riser, including vortex-induced oscillations, is also outlined.The literature concerning the articulated tower and tanker is relatively scarce. Available works related only to dynamic responses of articulated towers. The combined response of tower and tanker is only studied by Chakrabarti and Cotter [(1978), Analysis of a tower-tanker system. In Proceedings of the 10th Offshore Technology Conference, OTC 3202, pp. 1301–1310] in a limited sense. The review of these works is summarised relevant to this paper.In the end, the static analysis of the flexible riser under its self-weight and current is presented using a finite difference approach. The problem essentially involves geometrical non-linearity, which is tackled with the help of an iterative solution based on modified Newton-Raphson technique. The theoretical formulation presented is being used to develop the computer software for the static analysis of the flexible risers. 相似文献
7.
In re-entry,the drilling riser hanging to the holding vessel takes on a free hanging state,waiting to be moved from the initial random position to the wellhead.For the re-entry,dynamics calculation is often done to predict the riser motion or evaluate the structural safety.A dynamics calculation method based on Flexible Segment Model(FSM) is proposed for free hanging marine risers.In FSM,a riser is discretized into a series of flexible segments.For each flexible segment,its deflection feature and external forces are analyzed independently.For the whole riser,the nonlinear governing equations are listed according to the moment equilibrium at nodes.For the solution of the nonlinear equations,a linearization iteration scheme is provided in the paper.Owing to its flexibility,each segment can match a long part of the riser body,which enables that good results can be obtained even with a small number of segments.Moreover,the linearization iteration scheme can avoid widely used Newton-Rapson iteration scheme in which the calculation stability is influenced by the initial points.The FSM-based dynamics calculation is timesaving and stable,so suitable for the shape prediction or real-time control of free hanging marine risers. 相似文献
8.
Fatigue response of steel catenary risers (SCR) in the touchdown zone (TDZ) is significantly affected by riser-seabed interaction. Non-linear hysteretic riser-seabed interaction models have been recently developed to simulate the SCR cyclic embedment into the seabed. Despite the advancements achieved in the prediction of non-linear hysteretic riser-seabed interaction, several inconsistencies have been recently identified in the nodal performance of some of the popular models. These limitations need to be resolved by proposing new models or improving the existing models. However, it is necessary to evaluate the influence of the identified shortcomings of the existing models on the global performance of the riser. In this paper, the influence of nodal inconsistencies observed in a popular riser-seabed interaction model on the global performance of the riser was comprehensively examined in the TDZ. The riser embedment profile, cyclic contact stress, contact stress envelop, mean shear force, cyclic bending moment, and consequently the cumulative fatigue damage was investigated. The study showed that the soil model overestimates the riser embedment and other global responses. Recommendations were made to overcome the identified shortcomings of the existing models in future developments. 相似文献
9.
Collision between risers is an important design and operational concern, especially in deep water since the probability of collision tends to increase as the riser length increases. Riser collision is due to the joint effects of many processes, i.e. environmental loads, hydrodynamic interference and surface floater motions and the most of them are stochastic processes. This paper provides an approach for estimating the failure probability of riser collision by considering these joint effects and their stochastic nature. Firstly, a procedure for establishing the distribution function of the extreme minimum relative distance between two risers is introduced based on simulation tools and statistical data. Numerical simulation is performed to compute the minimum distance between risers for a given duration. Repeated simulations are applied so that the extreme value distribution can be established. Secondly, reliability analysis is performed by considering the uncertainties of input parameters related to environmental loads and riser system. The collision probability is calculated based on both the First/Second Order Reliability Method and the Monte Carlo simulation techniques. 相似文献
10.
Xiaohong Chen Yu Ding Jun Zhang Pierre Liagre John Niedzwecki Per Teigen 《Ocean Engineering》2006,33(1):93-117
The dynamically coupled interaction between the hull of a floating platform and its risers and tendons plays an important role in the global motions of the platform and the tension loads in the tendons and risers. This is an especially critical design issue in the frequency ranges outside the wave frequencies of significant energy content. This study examines the importance of this coupled dynamic interaction and the effectiveness of different approaches for their prediction. A numerical code, named COUPLE, has been developed for computing the motions and tensions pertaining to a moored floating structure positioned and restrained by its mooring/tendon and riser systems. In this study the experimentally measured motions of a mini-TLP are compared with those computed using COUPLE and alternative predictions based upon quasi-static analysis. The comparisons confirm that COUPLE is able to predict the dynamic interaction between the hull and its tendon and riser systems while the related quasi-static analysis fails. The comparisons also show that wave loads on the mini-TLP can be accurately predicted using the Morison equation provided that the wavelength of incident waves is much longer than the diameters of the columns and pontoons and that the wave kinematics used are sufficiently accurate. Although these findings are based upon the case of a mini-TLP, they are expected to be relevant to a wide range of floating or compliant deepwater structures. 相似文献
11.
Marine risers are susceptible to sustained vortex-induced vibration (VIV) because of their slenderness and light damping. Commonly used tools for analyzing VIV and the associated fatigue damage are based on the finite element method and rely on simplifying assumptions on the riser's physical model, the flow conditions, and characteristics of the response. In order to assess the influence of VIV and to ensure the integrity of the riser, field monitoring campaigns are often undertaken wherein data loggers such as strain sensors and/or accelerometers are installed on such risers. Given the recorded riser's dynamic response, empirical techniques can be used in VIV-related fatigue estimation. These empirical techniques make direct use of the measurements and are intrinsically dependent on the actual current profiles. Damage estimation can be undertaken for the different current profiles encountered and can account explicitly even for complex riser response characteristics. With a significant amount of data, “short-term” fatigue damage probability distributions, conditional on current, can be established. If the relative frequency of different current types is known from a separate metocean study, the short-term fatigue damage distributions can be combined with the current distributions to yield an integrated “long-term” fatigue damage model, which then can be used to predict the long-term cumulative fatigue damage for the instrumented riser. Non-parametric statistical techniques (that do not assume a specific function for the underlying distribution as parametric techniques do) are employed to describe the short-term fatigue damage data. In this study, data from the Norwegian Deepwater Programme (NDP) model riser experiments are used to demonstrate the effectiveness of empirical procedures and non-parametric statistics applied to field measurements to predict long-term fatigue damage, life, and probability of fatigue failure. 相似文献
12.
Steel catenary risers (SCR) connect seabed pipelines and flow lines to floating structures used for oil and gas production in deep waters. Waves and currents induce motions of the structure and the risers. The repeated motions of the risers at the touchdown zone in turn induce loads on the seabed soil and might eventually cause fatigue damage to the risers. The analysis of riser fatigue damage is heavily dependent on the soil model. Soil behaviour at touchdown zone such as soil remoulding, stiffness degradation and deformation of the seabed at the touchdown zone further complicate the accurate assessment of riser fatigue damage, which is currently not appropriately quantified in existing design methods. This paper presents centrifuge model tests simulating the repeated vertical movement of a length of riser on clay seabed with increasing undrained shear strength with depth. During the tests, the pipe was subject to cyclic motion over fixed vertical displacement amplitude from an invert embedment of 0.5-3.5 pipe diameters into the soil. The test results show a significant progressive degradation of soil strength and diminution of excess pore water pressure with increasing number of riser penetration/uplift cycle. In view of the different types of environment loadings experienced by floating platforms and various soil conditions, tests were also conducted to investigate the effect of soil strength, riser displacement rate and loading mode on riser-soil interaction during repetitive penetration/uplift motion of the riser. 相似文献
13.
The dynamic calculations of slender marine risers, such as Finite Element Method (FEM) or Modal Expansion Solution Method (MESM), are mainly for the slender structures with their both ends hinged to the surface and bottom. However, for the re-entry operation, risers held by vessels are in vertical free hanging state, so the displacement and velocity of lower joint would not be zero. For the model of free hanging flexible marine risers, the paper proposed a Finite Difference Approximation (FDA) method for its dynamic calculation. The riser is divided into a reasonable number of rigid discrete segments. And the dynamic model is established based on simple Euler-Bernoulli Beam Theory concerning tension, shear forces and bending moments at each node along the cylindrical structures, which is extendible for different boundary conditions. The governing equations with specific boundary conditions for riser’s free hanging state are simplified by Keller-box method and solved with Newton iteration algorithm for a stable dynamic solution. The calculation starts when the riser is vertical and still in calm water, and its behavior is obtained along time responding to the lateral forward motion at the top. The dynamic behavior in response to the lateral parametric excitation at the top is also proposed and discussed in this paper. 相似文献
14.
Steel catenary risers (SCRs) are usually cost-effective solutions in the development of offshore fields and the transferring of the hydrocarbons from the seabed to the floating facilities. These elements are subjected to the fatigue loads particularly in the touchdown zone (TDZ), where the oscillating SCR is exposed to cyclic contact with the seabed. The slug-induced oscillation is a significant contributor to the fatigue loads in the TDZ. The cyclic seabed soil softening under the wave-induced riser oscillations and the gradual penetration of the SCR into the seabed are widely accepted to have a significant influence on SCR fatigue performance. However, this has never been investigated for slug-induced oscillations due to the lack of integrated access to comprehensive numerical models enabling the simulation of the riser slugging and nonlinear hysteretic riser-seabed interaction at the same time. In this paper, an advanced interface was developed and verified using the multi-point moving tie constraint in order to examine the influence of cyclic seabed soil softening on slug-induced oscillations of SCR. The interface was integrated with a pre-developed user subroutine for modeling of the nonlinear hysteretic riser-seabed interaction and incorporated into a global SCR model in ABAQUS. A comprehensive parametric study was conducted to investigate the influence of slug characteristics and nonlinear seabed soil model on slug-induced, wave-induced, and combined wave/slug induced oscillations of SCR in the TDZ. It was observed that the nonlinear seabed model could significantly affect the embedment of the SCR into the seabed under the slug-induced oscillations and consequently improve the fatigue life. The developed user interface was found to be a strong framework for modeling riser slugging. 相似文献
15.
Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow. 相似文献
16.
复杂条件下双层立管的有限元分析 总被引：2，自引：2，他引：0
应用有限元方法,对双层立管进行了应力的计算分析。通过一个工程实例,阐述了模型建立．重要参数计算及结果分析的全过程,并着重分析了法兰位置,海底平管段的膨胀量及土壤的约束作用这三者对立管内部应力的显著影响,可为立管设计者借鉴。 相似文献
17.
The unbonded flexible pipe of eight layers,in which all the layers except the carcass layer are assumed to have isotropic properties,has been analyzed.Specifically,the carcass layer shows the orthotropic characteristics.The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness.With consideration of the effective elastic moduli,the structure can be properly analyzed.Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated.A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque.Further,the friction and contact of interlayer have been considered.Comparison between the finite element model and experimental results obtained in literature has been given and discussed,which might provide practical and technical support for the application of unbonded flexible pipes. 相似文献
18.
考虑钢悬链线立管大变形的特性以及内流的影响,利用Kane方法和拉格朗日应变理论建立钢悬链线立管的二维动力学模型。将顶部浮体的激励简化为一个沿顺流向的周期作用力施加于立管顶部,采用平均加速度法求解立管的动力响应。探讨顶部浮体不同激励频率下立管的非线性动力响应以及内流流速的大小对管道共振响应幅值的影响。 相似文献
19.
The challenges for determining the mechanical behavior of flexible pipes mainly arise from highly non-linear geometrical and material properties and complex contact interaction conditions between and within layers components. This paper develops an innovative model to investigate the linear viscoelastic behavior of flexible pipes under axisymmetric loads in time domain. The model is derived from an equivalent linear elastic axisymmetric model by invoking the elastic-viscoelastic correspondence principle. Analytical formulations that describe the behavior of the metallic helical layers based on a combination of differential geometry concepts and Clebsch–Kirchhoff equilibrium equations for initially curved slender elastic rods are presented. The elastic response of the homogenous polymeric cylindrical layers is also presented. The assemblage of both types of governing algebraic equations that approximate analytical solutions for force and moment distributions, deformations in each layer, as well as contact pressure between near layers, taking time-dependent characteristics of polymeric layers into account are provided and it is clear that the relationship between axial force and elongation is non-linear and encompasses a hysteretic response. Besides, the creep behavior in axial direction can also be found. Some insights into the differences in the behavior for several loading conditions are discussed by considering variable frequencies. 相似文献
20.
This paper presents the results of an experimental investigation on the variation in the tension and the distribution of drag force coefficients along flexible risers under vortex-induced vibration (VIV) in a uniform flow for Reynolds numbers (Re) up to 2.2×105. The results show that the mean tension is proportional to the square of the incoming current speed, and the tension coefficient of a flexible riser undergoing VIV can be up to 12. The mean drag force is uniformly and symmetrically distributed along the axes of the risers undergoing VIV. The corresponding drag coefficient can vary between 1.6 and 2.4 but is not a constant value of 1.2, as it is for a fixed cylinder in the absence of VIV. These experimental results are used to develop a new empirical prediction model to estimate the drag force coefficient for flexible risers undergoing VIV for Reynolds number on the order of 105, which accounts for the effects of the incoming current speed, the VIV dominant modal number and the frequency. 相似文献