首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
南黄海盆地是在前震旦系克拉通基础上发育的中、古生界海相与中、新生界陆相多旋回叠合盆地。通过地震资料解释,结合邻区钻井与区域地质资料,对南黄海盆地中部隆起中、古生代地层及其形成演化进行了研究,结果表明,南黄海盆地中部隆起沉积了较全的中、古生界海相地层,发育第四系—新近系、中—下三叠统青龙组、上二叠统、下二叠统—上泥盆统、中—下志留统,奥陶系—震旦系和前震旦系变质岩系等7套地震地质层序;主要经历了前震旦纪基底形成、震旦纪—早古生代克拉通发育、晚古生代—中三叠世稳定台地—陆内裂陷、晚三叠世—古近纪形成与抬升剥蚀及新近纪-第四纪坳陷沉降5个阶段。  相似文献   

2.
西部坳陷位于北黄海盆地西部,是盆地6个彼此分割的二级构造单元之一。从实际地震资料出发,结合区域地质及盆地东部钻井资料,运用地震地层学、层序地层学等方法,对西部坳陷的地层发育及分布特征、沉积环境及沉积相等进行了初步分析,认为本坳陷具东西双断的三层结构特征,发育上侏罗统、下白垩统、始新统、渐新统、新近系等地层,中新生代沉积巨厚,最厚达10 200 m,以河—湖—三角洲等陆相沉积为主,具有较好的油气条件及资源前景。  相似文献   

3.
西湖凹陷平湖斜坡带始新统平湖组层序地层   总被引:1,自引:0,他引:1  
运用高分辨率层序地层学的理论和技术,以钻井、测井、地震资料为基础,对西湖凹陷平湖斜坡带始新统平湖组进行了层序地层研究。研究区向上“变深”的非对称型短期旋回层序最为发育,反映了研究区在平湖组沉积时期处于距物源区较近或物源供给较充分的环境下;中期旋回以发育上升半旋回沉积厚度大于下降半旋回的不对称型旋回为主,层序分界面两侧为有利砂体发育的部位;在不同级次基准面旋回层序划分的基础上,建立了以中期旋回为时间-地层对比单元的钻(测)井高分辨率层序地层格架。  相似文献   

4.
万安盆地是南海重要的新生代含油气盆地之一,是较为典型的新生代走滑拉张盆地。以TACross的旋回层序地层学为指导,利用钻井、地震资料、岩心等各种实际资料,建立了万安盆地新生代层序地层格架,并对万安盆地的可容纳空间变化与层序形成的主要控制因素(构造沉降、海平面升降及沉积物供应)进行了综合分析研究。  相似文献   

5.
南黄海为新生代、中生代与古生代叠合盆地,发育了新生代-中生代碎屑岩地层和早中生代-古生代海相碳酸盐岩地层,部分夹碎屑岩地层.在对测井资料和苏北盆地的相关资料归纳分析的基础上,总结了南黄海沉积层的纵波速度特征,标定了地震反射界面和地震反射层序.  相似文献   

6.
西沙海槽盆地是南海北部陆坡西段的一个勘探程度较低的大型新生代深水沉积盆地。基于新采集的高精度多道地震资料并结合周边地区地质特征对盆地进行了层序地层分析,在研究区内识别出8个地震反射界面,结合地震剖面振幅旋回性变化,将研究区新生代地层划分了3个超层序和8个层序,并进一步论述了各层序的顶底接触关系、地震反射特征、地层厚度、层速度及砂岩含量等。在层序格架内识别出5类典型的地震相:平行-亚平行相、楔状发散相、前积相、杂乱相及水道充填相。在地震相划分和沉积相分析的基础上,通过对各层序沉积特征和沉积发育史的分析,认为始新世研究区呈现出陆相湖盆沉积体系特征;渐新世,盆地遭受海侵,研究区接受滨海相和浅海相沉积;早中新世,盆地中部沉积大规模半深海相沉积;中中新世末海平面出现下降,陆坡半深海环境的范围有所减小,西沙海槽浊积水道的雏形形成;晚中新世之后,研究区进入稳定的区域沉降阶段,主要发育了一套半深海-深海相泥岩沉积。此外,由研究区南北缘隆起区提供物源在层序内部还发育有近岸水下扇、三角洲、扇三角洲等沉积体,由地形高差控制作用在陡坡带或断层下降盘还形成了斜坡扇、浊积体。  相似文献   

7.
西沙海槽盆地是南海北部陆坡西段的一个勘探程度较低的大型新生代深水沉积盆地。基于新采集的高精度多道地震资料并结合周边地区地质特征对盆地进行了层序地层分析,在研究区内识别出8个地震反射界面,结合地震剖面振幅旋回性变化,将研究区新生代地层划分了3个超层序和8个层序,并进一步论述了各层序的顶底接触关系、地震反射特征、地层厚度、层速度及砂岩含量等。在层序格架内识别出5类典型的地震相:平行-亚平行相、楔状发散相、前积相、杂乱相及水道充填相。在地震相划分和沉积相分析的基础上,通过对各层序沉积特征和沉积发育史的分析,认为始新世研究区呈现出陆相湖盆沉积体系特征;渐新世,盆地遭受海侵,研究区接受滨海相和浅海相沉积;早中新世,盆地中部沉积大规模半深海相沉积;中中新世末海平面出现下降,陆坡半深海环境的范围有所减小,西沙海槽浊积水道的雏形形成;晚中新世之后,研究区进入稳定的区域沉降阶段,主要发育了一套半深海-深海相泥岩沉积。此外,由研究区南北缘隆起区提供物源在层序内部还发育有近岸水下扇、三角洲、扇三角洲等沉积体,由地形高差控制作用在陡坡带或断层下降盘还形成了斜坡扇、浊积体。  相似文献   

8.
以南黄海中部泥质区采集的高分辨率的反射地震剖面为资料,结合NHH01钻孔的数据,对南黄海中部NHH01钻孔周边地层进行了沉积与构造分析。在剖面可识别的深度范围内划分出10套地震层序,对地层进行了地质年代标定,发现地层旋回与深海氧同位素曲线相比在中更新世以来缺少了十余个旋回,反映了深海氧同位素曲线在陆架区应用的局限性;在剖面上识别了大量的断层,其中大部分断层的构造活动一直持续到中更新世,揭示南黄海最新一期构造活动一直持续到晚更新世之前;通过分析NHH01钻孔周边的构造,对胶黄铁矿的形成环境在构造方面进行了探讨。  相似文献   

9.
以南黄海中部泥质区采集的高分辨率的反射地震剖面为资料,结合NHH01钻孔的数据,对南黄海中部NHH01钻孔周边地层进行了沉积与构造分析。在剖面可识别的深度范围内划分出10套地震层序,对地层进行了地质年代标定,发现地层旋回与深海氧同位素曲线相比在中更新世以来缺少了十余个旋回,反映了深海氧同位素曲线在陆架区应用的局限性;在剖面上识别了大量的断层,其中大部分断层的构造活动一直持续到中更新世,揭示南黄海最新一期构造活动一直持续到晚更新世之前;通过分析NHH01钻孔周边的构造,对胶黄铁矿的形成环境在构造方面进行了探讨。  相似文献   

10.
利用层序地层学理论,对北波拿巴盆地北部地区中生界的层序地层特征进行了研究,可以分为4个二级层序和9个三级层序。从内部反射结构和外部几何形态出发,再辅以振幅、连续性等参数,在研究区的中生界地震反射剖面上可见多种地震相类型,其中亚平行波状地震相、丘状地震相、发散充填相、前积地震相等最为发育。地震相的分布和演化受沉积体系演化的控制,在测井和钻井资料约束下的地震相解释能够重现北波拿巴盆地北部地区沉积体系的演化。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

13.
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.  相似文献   

14.
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.  相似文献   

15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

16.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

17.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

18.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.  相似文献   

19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号