首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 203 毫秒
1.
We describe and compare the two transform zones that connect the Icelandic rift segments and the mid-Atlantic Ridge close to the Icelandic hot spot, in terms of geometry of faulting and stress fields. The E–W trending South Iceland Seismic Zone is a diffuse shear zone with a Riedel fault pattern including N0°–N20°E trending right-lateral and N60°–N70°E trending left-lateral faults. The dominant stress field in this zone is characterised by NW–SE extension, in general agreement with left-lateral transform motion. The Tjörnes Fracture Zone includes three major lineaments at different stages of development. The most developed, the Húsavík–Flatey Fault, presents a relatively simple geometry with a major fault that trends ESE–WNW. The stress pattern is however complex, with two dominant directions of extension, E–W and NE–SW on average. Both these extensions are compatible with the right-lateral transform motion and reveal different behaviours in terms of coupling. Transform motion has unambiguous fault expression along a mature zone, a situation close to that of the Tjörnes Fracture Zone. In contrast, transform motion along the immature South Iceland Seismic Zone is expressed through a more complicate structural pattern. At the early stage of the transform process, relatively simple stress patterns prevail, with a single dominant stress field, whereas, when the transform zone is mature, moderate and low coupling situations may alternate, as a function of volcanic–tectonic crises and induce changes in stress orientation.  相似文献   

2.
The Patras, Corinth, and northern Saronic gulfs occupy a 200-km-long, N120° trending Pleistocene rift zone, where Peloponnese drifts away from mainland Greece. The axes of Patras and Corinth basins are 25 km apart and linked by two transfer-fault zones trending N040°. The older one defines the western slope of Panachaïkon mountain, and the younger one limits the narrow Rion–Patras littoral plain. Between these two faults, the ca. 4-km-thick Rion–Patras series dips 20–30° SSW. It is part of the Patras gulf synrift deposits, which pile in an asymmetric basin governed by a fault dipping ca. 25–35° NNE, located in the southern Gulf of Patras. Mapping of this fault to the east in northern Peloponnese shows that it is an inactive north-dipping low-angle normal fault (0° to 30°N), called the northern Peloponnese major fault (NPMF). The structural evolution of the NPMF was different in the gulfs of Patras and Corinth. In the Gulf of Patras, it is still active. In northern Peloponnese, footwall uplift and coeval southward tilting flattened the fault and locked its southern part. Steeper normal faults formed north of the locked area, connecting the still active northern part of the NPMF to the surface. After several locks, the presently active normal faults (Psathopyrgos, Aigion, Helike) trend along the southern shore of the Gulf of Corinth. This migration of faults caused the relative 25 km northward shift of the Corinth basin, and the formation of NE–SW trending transfer-faults between the Corinth and Patras gulfs.  相似文献   

3.
Two major faults, over 32 km long and 6.4 km apart, truncate or overprint most previous folds and faults as they trend more northerly than the previous N25°E to N40°E fold trends. The faults were imposed as the last event in a region undergoing sequential counter-clockwise generation of tectonic structures. The western Big Cove anticline has an early NW verging thrust fault that emplaces resistant rocks on its NW limb. A 16 km overprint by the Cove Fault is manifested as 30 small northeast striking right-lateral strike-slip faults. This suggests major left-lateral strike-slip separation on the Cove Fault, but steep, dip-slip separation also occurs. From south to north the Cove Fault passes from SE dipping beds within the Big Cove anticline, to the vertical beds of the NW limb. Then it crosses four extended, separated, Tuscarora blocks along the ridge, brings Cambro-Ordovician carbonates against Devonian beds, and initiates the zone of overprinted right-lateral faults. Finally, it deflects the Lat 40°N fault zone as it crosses to the next major anticline to the northwest. To the east, the major Path Valley Fault rotates and overprints the earlier Carrick Valley thrust. The Path Valley Fault and Cove Fault may be Mesozoic in age, based upon fault fabrics and overprinting on the east–west Lat 40°N faults.  相似文献   

4.
The Bou Madine ore deposit is located SW of Jbel Ougnat, the easternmost inlier of the Anti-Atlas Pan-African belt in Morocco. The host rocks are high-K calc-alkaline volcanic rocks, that are part of the Neoproterozoic Tamerzaga-Timrachine Formation (TTF, lower PIII). The TTF consists of ignimbrites of rhyolitic to dacitic compositions, andesite flows and hypovolcanic bodies (andesite dykes and rhyolite chonoliths) emplaced along N160°E tension gashes associated with a regional N30°E sinistral fault system. The mineralization is related to a high enthalpy geothermal system, eventually evolving into a low temperature epithermal system. A regional propylitisation (T around 260 °C) overprinted the TTF rocks prior to the emplacement of the mineralization. There were two main hydrothermal stages. During the first stage, massive veins with pyrite, arsenopyrite and minor pyrrhotite and cassiterite were formed. The veins were emplaced along N160°E-trending en echelon joints related to N120°E dextral arrays. A quartz-sericite-pyrite alteration overprinted the propylites around the veins (“bleached haloes”), at temperatures up to 300–310 °C. The second stage of mineralization was coeval with dextral re-activation of the N160°E veins, in relation with a NE-ward shift of the shortening direction. First, polymetallic sulphides (sphalerite, chalcopyrite, stannite, galena) were deposited at temperatures 260 °C. Younger quartz veinlets contain arsenopyrite and minor micrometre-size sulphides and sulpho-salts, hosting the precious metals. This was the low temperature epithermal stage (≈150 °C), in relation with invading meteoric water.  相似文献   

5.
J. -B. Edel   《Tectonophysics》2003,363(3-4):225-241
Generally, the lack of bedding criteria in basement units hampers the interpretation of paleomagnetic results in terms of geotectonics. Nevertheless, this work demonstrates that successive remagnetizations recorded in Early Carboniferous metamorphic and plutonic units, without clear bedding criteria, can be used to constrain a polyphased tectonic evolution consisting of a regional clockwise rotation, followed by a folding phase, a tilting phase and a second regional clockwise rotation.Metamorphic, ultrabasic, tonalitic and granitic rocks from different parts of Limousin (western French Massif central; 45.5°N/1.25°E), which underwent metamorphism during Devonian–Early Carboniferous or were intruded in the Early–Middle Carboniferous, were sampled in order (a) to identify the magnetic overprinting phases and the related tectono-magmatic events and (b) to constrain the regional and plate tectonic evolution of Limousin. Paleomagnetic results from 32 new and 26 sites investigated previously show that at least 90% of the magnetization isolated in rocks older than 330 Ma are overprints. In agreement with results from adjacent areas of the Variscan belt, the major overprinting phases occurred: (a) in the last stages of the major exhumation phase [332–328 Ma; mean Virtual Geomagnetic Pole (VGP) “Cp”: 37°N/70.5°E], (b) during the post-collisional syn-orogenic extension (325–315 Ma; VGP “B”: 11°N/114°E), (c) in the Latest Carboniferous and Early Permian (VGP “A1”: 27°N/149°E) and (d) in the Late Permian (VGP “A”: 48°N/146°E). The Middle–Late Carboniferous overprints “Cp” and “B” are contemporaneous with emplacement of leucogranitic, crustal derived plutons, and probably result from the hydro-thermal activity related to the magmatism. The drift from “Cp” directions to “B” directions implies that after 330 Ma, Limousin underwent a clockwise rotation by 65°, together with the Central Europe Variscides. The “Bt” components, the VGPs of which deviate from the mean apparent polar wander path (APWP) of the belt, are interpreted as “B” overprints tilted during Late Variscan tectonics, that is, in the time range 325–315 Ma. The first and most important generation of “Bt” overprints was tilted during NW–SE folding associated with NE–SW shortening, updoming and emplacement of leucogranitic plutons. The second generation reveals southeastward tilting due to NE-striking normal faulting. The drift from “B” to “A1” directions implies that Limousin has participated to the second clockwise rotation by 40° of the whole belt in Westphalian times.  相似文献   

6.
The Central Metasedimentary Belt boundary tectonic zone (CMBbtz) is a 10–20-km-wide zone of intense structural deformation within the 1.3–1.0 Ga Grenville orogen of southeastern Canada. The crustal structure of the exposed CMBbtz has been well studied, but its sub-Phanerozoic location and geometry beneath the urban development and nuclear stations of the Toronto region are not well known. A new 75-km Lithoprobe reflection profile acquired close to Toronto provides a clear image of the CMBbtz as a panel of southeast-dipping reflections that extends with moderate dip (<25°) to mid-crustal depth (25 km). These dipping reflections truncate and (or) overprint a subhorizontal band of reflectivity at 21 km depth. The seismic line is oblique to the major structural trends; cross-dip analysis shows that the southeast-dipping reflections have a strike and dip of N13°E and 25°, whereas the “subhorizontal” reflections strike and dip at N65°E and 20°, respectively. Both of these bands of reflectivity can be correlated to magnetic anomalies in the CMBbtz or its immediate footwall. Magnetic anomalies with similar strike directions are well expressed within a distinct rhomboid-shaped region (106×109 km) in the subsurface of western Lake Ontario, herein named Mississauga domain. Taken together, the seismic and magnetic data are inconsistent with existing models, in which the CMBbtz is extrapolated beneath Lake Ontario along a linear magnetic anomaly. We propose a revised subsurface trace of the CMBbtz along the western edge of the Mississauga domain. Small earthquakes in western Lake Ontario appear to cluster along trends co-linear with ENE magnetic anomalies, suggesting a possible degree of basement tectonic control on local intraplate seismicity.  相似文献   

7.
The recent tectonics of the Arctic Basin and northeastern Asia are considered as a result of interaction between three lithospheric plates: North-America, Eurasia and Spitsbergen. Seismic zones (coinciding in the Norway-Greenland basin with the Kolbeinsey, Mohns and Knipovich ridges, and in the Arctic Ocean with the Gakkel Ridge) clearly mark the boundaries between them. In southernmost Svalbard (Spitsbergen), the secondary seismic belt deviates from the major seismic zone. This belt continues into the seismic zone of the Franz Josef Land and then merges into the seismic zone of the Gakkel Ridge at 70°–90°E. The smaller Spitsbergen plate is located between the major seismic zone and its secondary branch.Within northeastern Asia, earthquake epicenters with magnitude over 4.5 are concentrated within a 300-km wide belt crossing the Eurasian continent over a distance of 3000 km from the Lena estuary to the Komandorskye Islands. A single seismic belt crosses the northern sections of the Verkhoyansky Ridge and runs along the Chersky Ridge to the Kolymo-Okhotsk Divide.To compute the poles of relative rotation of the Eurasian, North-American and Spitsbergen plates we use 23 new determinations of focal-mechanism solutions for earthquakes, and 38 azimuths of slip vectors obtained by matching of symmetric mountain pairs on both sides of the Knipovich and Gakkel ridges; we also use 14 azimuths of strike-slip faults within the Chersky Ridge determined by satellite images. The following parameters of plate displacement were obtained: Eurasia/North America: 62.2°N, 140.2°E (from the Knipovich Ridge section south of the triple junction); 61.9°N, 143.1°E (from fault strikes in the Chersky Ridge); 60.42°N, 141.56°C (from the Knipovich section and from fault strikes in the Chersky Ridge); 59.48°N, 140.83°E, α = 1.89 · 10−7 deg/year (from the Knipovich section, from fault strikes in the Chersky Ridge and from the Gakkel Ridge section east of the triple junction). The rate was calculated by fitting the 2′ magnetic lineations within the Gakkel Ridge).North-America/Spitsbergen: 70.96°N, 121.18°E, α = −2.7 · 10−7 deg/year from the Knipovich Ridge section north of the triple junction, from earthquakes in the Spitsbergen fracture zone and from the Gakkel Ridge section west of the triple junction). Eurasia/Spitsbergen: 70.7°N, 25.49°E, α = −0.99 · 10−7 deg/year (from closure of vector triangles).  相似文献   

8.
Detailed geologic mapping of the San Andreas fault zone in Los Angeles County since 1972 has revealed evidence for diverse histories of displacement on branch and secondary faults near Palmdale. The main trace of the San Andreas fault is well defined by a variety of physiographic features. The geologic record supports the concept of many kilometers of lateral displacement on the main trace and on some secondary faults, especially when dealing with pre-Quaternary rocks. However, the distribution of upper Pleistocene rocks along branch and secondary faults suggests a strong vertical component of displacement and, in many locations, Holocene displacement appears to be primarily vertical. The most recent movement on many secondary and some branch faults has been either high-angle (reverse and normal) or thrust. This is in contrast to the abundant evidence for lateral movement seen along the main San Andreas fault. We suggest that this change in the sense of displacement is more common than has been previously recognized.The branch and secondary faults described here have geomorphic features along them that are as fresh as similar features visible along the most recent trace of the San Andreas fault. From this we infer that surface rupture occurred on these faults in 1857, as it did on the main San Andreas fault. Branch faults commonly form “Riedel” and “thrust” shear configurations adjacent to the main San Andreas fault and affect a zone less than a few hundred meters wide. Holocene and upper Pleistocene deposits have been repeatedly offset along faults that also separate contrasting older rocks. Secondary faults are located up to 1500 m on either side of the San Andreas fault and trend subparallel to it. Moreover, our mapping indicates that some portions of these secondary faults appear to have been “inactive” throughout much of Quaternary time, even though Holocene and upper Pleistocene deposits have been repeatedly offset along other parts of these same faults. For example, near 37th Street E. and Barrel Springs Road, a limited stretch of the Nadeau fault has a very fresh normal scarp, in one place as much as 3 m high, which breaks upper Pleistocene or Holocene deposits. This scarp has two bevelled surfaces, the upper surface sloping significantly less than the lower, suggesting at least two periods of recent movement. Other exposures along this fault show undisturbed Quaternary deposits overlying the fault. The Cemetery and Little Rock faults also exhibit selected reactivation of isolated segments separated by “inactive” stretches.Activity on branch and secondary faults, as outlined above, is presumed to be the result of sympathetic movement on limited segments of older faults in response to major movement on the San Andreas fault. The recognition that Holocene activity is possible on faults where much of the evidence suggests prolonged inactivity emphasizes the need for regional, as well as detailed site studies to evaluate adequately the hazard of any fault trace in a major fault zone. Similar problems may be encountered when geodetic or other studies, Which depend on stable sites, are conducted in the vicinity of major faults.  相似文献   

9.
The 14 November 2001 Kunlun, China, earthquake with a moment magnitude (Mw) 7.8 occurred along the Kusai Lake–Kunlun Pass fault of the Kunlun fault system. We document the spatial distribution and geometry of surface rupture zone produced by this earthquake, based on high-resolution satellite (Landsat ETM, ASTER, SPOT and IKONOS) images combined with field measurements. Our results show that the surface rupture zone can be divided into five segments according to the geometry of surface rupture, including the Sun Lake, Buka Daban–Hongshui River, Kusai Lake, Hubei Peak and Kunlun Pass segments from west to east. These segments, each 55 to 130 km long, are separated by step-overs. The Sun Lake segment extends about 65 km with a strike of N45° 75°W (between 90°05′E 90°50′E) along the previously unrecognized West Sun Lake fault. A gap of about 30 km long exists between the Sun Lake and Buka Daban Peak where no obvious surface ruptures can be observed either from the satellite images or field observations. The Buka Daban–Hongshui River, Kusai Lake, Hubei Peak and Kunlun Pass segments run about 365 km striking N75° 85°W along the southern slope of the Kunlun Mountains (between 91°07′E 94°58′E). This segmentation of the surface rupture is well correlated with the pattern of slip distribution measured in the field. Detailed mapping suggest that these five first-order segments can be further separated into over 20 second-order segments with a length of 10–30 km, linked by smaller scale step-overs or bends.Our result also shows that the total coseismic surface rupture length produced by the 2001 Kunlun earthquake is about 430 km (excluding the 30-km-long gap), which is the longest coseismic surface rupture for an intracontinental earthquake ever recorded.Finally, we suggest a multiple bilateral rupture propagation model that shows the rupture process of the 2001 Mw 7.8 earthquake is complex. It consists of westward and eastward rupture propagations and interaction of these bilateral rupture processes.  相似文献   

10.
The Middle and Late Triassic Santa Maria Basin, exposed in southernmost Brazil, and Waterberg Basin, in Namibia, are herein interpreted as part of en échelon small basins in southern West Gondwana. The main structures are the Waterberg-Omaruru Fault which can be connected to a NW-strike anastomosed fault zone in Brazil. Based on field structural and stratigraphic analysis two populations of NW-strike fractures, named A-type and B-type, are recognized. A-type fractures (Az = 280°-290°) occur in the Sanga do Cabral Supersequence, underlying units of Santa Maria Basin, as extension of the Waterberg-Omaruru Fault during the Early Triassic. B-type fractures (Az = 295°-345°) are observed in all studied stratigraphic units, from the Triassic Sanga do Cabral Supersequence to the Early Cretaceous Botucatu/Serra Geral formations. Based on the structural analysis we propose that NNE-SSW extension reactivated structures of the Damara Belt, Namibia, with a propagation towards Rio Grande do Sul State forming an anastomosing normal fault system and related-rift basin by Early-Middle Triassic time. The A-type fractures were preferentially active by this phase and the B-type ones are interpreted as secondary link segments within the anastomosing system. During the Gondwana break-up and South Atlantic opening (rift to proto-oceanic phase, Aptian) the B-type fractures were reactivated as normal faults by N50°E-S50°W extension.  相似文献   

11.
Yigui  Shihong  Franco  Yu  Yuanhou   《Gondwana Research》2009,16(2):255
The Machaoying fault zone extends along the southern margin of the North China Craton (NCC) and controlled the regional structures and hydrothermal mineral systems in this area. The fault underwent at least two major deformational phases, as revealed by macro- and micro-structural observations from a well-developed segment of the fault in the Hongzhuang–Baitu area, located south of the Xiong'er Mountains. Early ductile deformation is characterized by thrusting from north to south, which was subsequently overprinted by late brittle faulting. Syntectonic strain shadows of biotite are preserved around rotated porphyroclasts of quartz amygdales in mylonite. The biotite yields a 40Ar–39Ar plateau age of 524.9 ± 1.9 Ma, which is interpreted as the time of regional thrusting along the Machaoying fault zone. The thrusting may be temporally correlated with an Early Cambrian discontinuity in sedimentation observed in the rocks sequences of the NCC, suggesting a compressional regime in this area and a craton-wide tectonic event. Many 540–500 Ma tectonic events have been previously identified in the Qinling–Qilian–Kunlun Orogenic Belt of central China and in massifs in northeastern China, both of which surround the NCC, and some of these were interpreted to be associated with assembly of Gondwana. However, paleomagnetic data indicate that the NCC was unlikely to have been connected with Gondwana in the Early Cambrian and thus our new biotite date cannot record deformation along the Gondwanan margin. Dating of K-feldspar from a quartz–K-feldspar vein formed along one of the brittle faults of the Machaoying fault zone yields a much younger 40Ar–39Ar plateau age of 119.5 ± 0.7 Ma. This is a minimum age for the brittle deformation along the southern margin of the NCC, which also overlaps the age of widespread gold and molybdenum mineralization in the region.  相似文献   

12.
Questions persist concerning the earthquake potential of the populous and industrial Lake Ontario (Canada–USA) area. Pertinent to those questions is whether the major fault zone that extends along the St. Lawrence River valley, herein named the St. Lawrence fault zone, continues upstream along the St. Lawrence River valley at least as far as Lake Ontario or terminates near Cornwall (Ontario, Canada)–Massena (NY, USA). New geological studies uncovered paleotectonic bedrock faults that are parallel to, and lie within, the projection of that northeast-oriented fault zone between Cornwall and northeastern Lake Ontario, suggesting that the fault zone continues into Lake Ontario. The aforementioned bedrock faults range from meters to tens of kilometers in length and display kinematically incompatible displacements, implying that the fault zone was periodically reactivated in the study area. Beneath Lake Ontario the Hamilton–Presqu'ile fault lines up with the St. Lawrence fault zone and projects to the southwest where it coincides with the Dundas Valley (Ontario, Canada). The Dundas Valley extends landward from beneath the western end of the lake and is marked by a vertical stratigraphic displacement across its width. The alignment of the Hamilton–Presqu'ile fault with the St. Lawrence fault zone strongly suggests that the latter crosses the entire length of Lake Ontario and continues along the Dundas Valley.The Rochester Basin, an east–northeast-trending linear trough in the southeastern corner of Lake Ontario, lies along the southern part of the St. Lawrence fault zone. Submarine dives in May 1997 revealed inclined layers of glaciolacustrine clay along two different scarps within the basin. The inclined layers strike parallel to the long dimension of the basin, and dip about 20° to the north–northwest suggesting that they are the result of rigid-body rotation consequent upon post-glacial faulting. Those post-glacial faults are growth faults as demonstrated by the consistently greater thickness, unit-by-unit, of unconsolidated sediments on the downthrown (northwest) side of the faults relative to their counterparts on the upthrown (southeast) side. Underneath the western part of Lake Ontario is a monoclinal warp that displaces the glacial and post-glacial sediments, and the underlying bedrock–sediment interface. Because of the post-glacial growth faults and the monoclinal warp the St. Lawrence fault zone is inferred to be tectonically active beneath Lake Ontario. Furthermore, within the lake it crosses at least five major faults and fault zones and coexists with other neotectonic structures. Those attributes, combined with the large earthquakes associated with the St. Lawrence fault zone well to the northeast of Lake Ontario, suggest that the seismic risk in the area surrounding and including Lake Ontario is likely much greater than previously believed.  相似文献   

13.
The Pyramid Lake fault zone is within the Honey Lake—Walker Lake segment of the Walker Lane, a NW-trending zone of right-slip transcurrent faulting, which extends for more than 600 km from Las Vegas, Nevada, to beyond Honey Lake, California. Multiscale, multiformat analysis of Landsat imagery and large-scale (1: 12,000) lowsun angle aerial photography, delineated both regional and site-specific evidence for faults in Late Cenozoic sedimentary deposits southwest of Pyramid Lake. The fault zone is coincident with a portion of a distinct NW-trending topographic discontinuity on the Landsat mosaic of Nevada. The zone exhibits numerous geomorphic features characteristic of strike-slip fault zones, including: recent scarps, offset stream channels, linear gullies, elongate troughs and depressions, sag ponds, vegetation alignments, transcurrent buckles, and rhombohedral and wedge-shaped enclosed depressions. These features are conspicuously developed in Late Pleistocene and Holocene sedimentary deposits and landforms.The Pyramid Lake shear zone has a maximum observable width of 5 km, defined by Riedel and conjugate Riedel shears with maximum observable lenghts of 10 and 3 km, respectively. P-shears have formed symmetrical to the Riedel shears and the principal displacement shears, or continuous horizontal shears, isolate elongate lenses of essentially passive material; most of the shears are inclined at an angle of approximately 4° to the principal direction of displacement. This suggests that the shear zone is in an early “PreResidual Structure” stage of evolution, with the principal deformation mechanism of direct shear replacing the kinematic restraints inherent in the strain field.Historic seismic activity includes microseismic events and may include the earthquake of about 1850 reported for the Pyramid Lake area with an estimated Richter magnitude of 7.0. Based on worldwide relations of earthquake magnitude to length of the zone of surface rupture, the Pyramid Lake fault zone is inferred to be capable of generating a 7.0–7.5-magnitude event for a maximum observable length of approximately 6 km and a 6.75–7.25-magnitude event for a half length of approximately 30 km.  相似文献   

14.
Active faulting and seismic properties are re-investigated in the eastern precinct of the city of Thessaloniki (Northern Greece), which was seriously affected by two large earthquakes during the 20th century and severe damage was done by the 1759 event. It is suggested that the earthquake fault associated with the occurrence of the latest destructive 1978 Thessaloniki earthquake continues westwards to the 20-km-long Thessaloniki–Gerakarou Fault Zone (TGFZ), which extends from the Gerakarou village to the city of Thessaloniki. This fault zone exhibits a constant dip to the N and is characterised by a complicated geometry comprised of inherited 100°-trending faults that form multi-level branching (tree-like fault geometry) along with NNE- to NE-trending faults. The TGFZ is compatible with the contemporary regional N–S extensional stress field that tends to modify the pre-existing NW–SE tectonic fabric prevailing in the mountainous region of Thessaloniki. Both the 1978 earthquake fault and TGFZ belong to a ca. 65-km-long E–W-trending rupture fault system that runs through the southern part of the Mygdonia graben from the Strymonikos gulf to Thessaloniki. This fault system, here called Thessaloniki–Rentina Fault System (TRFS), consists of two 17–20-km-long left-stepping 100°-trending main fault strands that form underlapping steps bridged by 8–10-km-long ENE–WSW faults. The occurrence of large (M6.0) historical earthquakes (in 620, 677 and 700 A.D.) demonstrates repeated activation, and therefore the possible reactivation of the westernmost segment, the TGFZ, could be a major threat to the city of Thessaloniki. Changes in the Coulomb failure function (ΔCFF) due to the occurrence of the 1978 earthquake calculated out in this paper indicate that the TGFZ has been brought closer to failure, a convincing argument for future seismic hazard along the TGFZ.  相似文献   

15.
Paleomagnetic samples of Paleocene–Eocene red sandstones were collected at 36 sites from the Jiangdihe-4 and Zhaojiadian formations around the Yongren (26.1°N, 101.7°E) and Dayao areas (25.7°N, 101.3°E). These areas are located in the Chuxiong basin of the Chuan Dian Fragment, southwestern part of the Yangtze block. After stepwise thermal demagnetization, a high-temperature component with unblocking temperature of about 680 °C is isolated from 26 sites. The primary nature of this magnetization is ascertained through positive fold and reversal tests at 95% confidence level. The tilt-corrected mean paleomagnetic directions for the Yongren and Dayao areas are D=17.2°, I=26.6° with α95=5.8° and D=16.5°, I=31.1° with α95=4.8, respectively. Easterly deflected declinations from this study are consistent with those reported from other areas of the Chuxiong basin, indicating its wide presence in the Cretaceous–Eocene formations of the said basin. Comparison with declination values expected from the Cretaceous–Eocene APWP of Eurasia indicates that the magnitude of clockwise rotation systematically increases toward the southeast within the Chuxiong basin as well as in the Chuan Dian Fragment. This trend of the differential tectonic rotation in the Chuan Dian Fragment is consistent with curvature of the Xianshuihe–Xiojiang fault system. Deformation of the Chuxiong basin can fairly be associated with the formation of eastward bulge in the southern part of the Chuan Dian fragment. During southward displacement, the Chuan Dian Fragment was probably subjected to tectonic stresses as a result interaction with the Yangtze and Indochina blocks, which resulted into east–west extension and north–south shortening.  相似文献   

16.
Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ1) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ1 oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ1 striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment.  相似文献   

17.
Zircon fission-track (FT) and U–Pb analyses were performed on zircon extracted from a pseudotachylyte zone and surrounding rocks of the Asuke Shear Zone (ASZ), Aichi Prefecture, Japan. The U–Pb ages of all four samples are  67–76 Ma, which is interpreted as the formation age of Ryoke granitic rocks along the ASZ. The mean zircon FT age of host rock is 73 ± 7 (2σ) Ma, suggesting a time of initial cooling through the zircon closure temperature. The pseudotachylyte zone however, yielded a zircon FT age of 53 ± 9 (2σ) Ma, statistically different from the age of the host rock. Zircon FTs showed reduced mean lengths and intermediate ages for samples adjacent to the pseudotachylyte zone. Coupled with the new zircon U–Pb ages and previous heat conduction modeling, the present FT data are best interpreted as reflecting paleothermal effects of the frictional heating of the fault. The age for the pseudotachylyte coincides with the change in direction of rotation of the Pacific plate from NW to N which can be considered to initialize the NNE–SSW trending sinistral–extensional ASZ before the Miocene clockwise rotation of SW Japan. The present study demonstrates that a history of fault motions in seismically active regions can be reconstructed by dating pseudotachylytes using zircon FT thermochronology.  相似文献   

18.
The Owl Creek Gold Mine is located in Hoyle Township, approximately 18 km northeast of Timmins, Ontario, Canada. The open-pit mine exposes a sequence of altered and mineralized mafic tholeiitic volcanics bounded to the north and south by greywacke and argillite. Gold occurs in the free state in quartz veins, often with graphite, and as fine gold on surfaces of, and within fractures in, pyrite.The study was designed to determine the distribution and distance of transport of Au in overburden down-ice from subcropping Au mineralization. This required an understanding of the glacial history of the area.The Quaternary stratigraphy at Owl Creek was studied and sampled by means of 17 sonic and 15 reverse-circulation overburden drill holes near the open pit, and several overburden exposures in the open-pit walls. Nonmagnetic heavy-mineral concentrates (specific gravity >3.3) were made from the <2000 μm (−10 mesh) fraction of all overburden samples from the drill hole and section sampling. The heavy-mineral concentrates were analyzed for Au by neutron activation. A till pebble lithology study was done on the >2000 μm (−10 mesh) fraction of the sonic drill core.Our stratigraphic studies indicate that there were three major Wisconsinan (Weichselian) ice advances and one minor, late readvance in the Timmins area. The transport and deposition of sediments comprising the “Oldest”, “Older”, Matheson and Cochrane stratigraphic “packages” (oldest to youngest) are related to three ice advances and one readvance which moved towards 240° ± 10°, 150° ± 5°, 170° ± 5° and 130° ± 5°, respectively.Geochemically anomalous levels of Au in the overburden define two dispersal trains down-ice of the Owl Creek Gold Mine. One, in the “Older” lodgement till, is 400–500 m long. The other in Matheson ablation and waterlain tills, is approximately 700 m long.The till pebble lithology study showed that pebble counting can be used to approximate bedrock contacts, but may not necessarily identify the source rock type of the matrix.  相似文献   

19.
Franck A. Audemard   《Tectonophysics》2006,424(1-2):19-39
This paper discusses the surface rupture of the Cariaco July 09, 1997 Ms 6.8 earthquake in northeastern Venezuela – located at 10.545°N and 63.515°W and about 10 km deep. The field reconnaissance of the ground breaks confirms that this event took place on the ENE–WSW trending onshore portion of the dextral El Pilar fault (between the Gulfs of Cariaco and Paria), which is part of the major wrenching system within the Caribbean–South America plate boundary zone. Dextral slip along this fault was further supported by the structural style of this rupture (en echelon right-lateral R shears connected by mole tracks at restraining stepovers) and by larger geometric complexities (pop-ups at Las Manoas and Guarapiche), as well as by the focal mechanism solutions determined for the event by several authors. This 1997 surface ruptre comprised two distinct sections, from west to east: (a) a main very conspicuous, continuous, 30-km-long, rather straight, 075°N-trending alignment of en echelon surface breaks, with a rather constant, purely dextral coseismic slip of about 25  cm, but reaching a maximum value of 40 cm slightly northwest of Pantoño; and (b) a secondary discontinuous, 10-km-long, boomerang-shaped rupture, with a maximum coseismic slip of 20 cm at Guarapiche. The onshore extent of the surface rupture totalled 36 km, but may continue westward underwater, as suggested by the very shallow aftershock seismicity. This aftershock activity also clearly defined the steep north dip of the fault plane along the western rupture, suggesting tectonic inheritance on this major fault.From many locals' accounts, the rupture seems to have propagated from Pantoño to the west (highly asymmetric bidirectionality). This suggests that earthquake nucleation happened at or near the Casanay–Guarapiche restraining bend and rupture quickly propagated westward, allowing only a small fraction to progress eastwards beyond the bend. Additionally, the large fraction of after-slip (or creep) released is to be related to such restraining bend, which seems to have partly locked slip during rupture.  相似文献   

20.
In the spring of 1979, 350°C springs precipitating hydrothermal sulphides and sulphates directly on to the sea-floor were discovered on the crest of the East Pacific Rise (EPR) at 21°N by the astonished scientific party of the RISE submersible expedition. These hot springs are within a linear field of active and inactive hydrothermal vents extending 6 km along the rise axis. Typically the mineral deposits at EPR, 21°N consist of basal sulphide mounds surmounted by mineralized sulphide-sulphate edifices, or “chimneys”, reaching heights up to 13 m above the sea floor. The mounds rest directly on fresh basalt and cover areas up to 450 m2. Chimneys atop mounds may be active or dead. The hottest active chimneys (350°C) spew forth fluids blackened by fine-grained sulphide precipitates, dominantly hexagonal pyrrhotite and iron-rich sphalerite. These “black smokers” are distinguished from cooler “white smoker” chimneys which are encrusted by worm tubes and emit milky fluids bearing amorphous silica, barite, and pyrite.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号