首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A model is presented to transform wind speed observations at a single height over sea or near the coast to any possible location and height in a topographic flat coastal region (up to distances of about 5 km from the coast and up to heights of 100 m). Only moderate and strong winds from the sea are considered, which are particularly important for wind energy applications. The model, called diabatic coast model, which is based on the well known internal boundary layer (IBL) concept and Monin-Obukhov similarity theory, describes the effects of the roughness transition from sea to land as well as the effect of stability on the shape of the profiles and the IBL growth. The predicted IBL heights are compared with published data.In the second part of this paper, the model is compared with measurements taken at the Maasvlakte location near the Dutch coast. It is shown that a neutral formulation of the IBL height is sufficient to model the overall mean wind speed with height, but that stability corrections are needed to describe the diurnal variations in wind speed properly. Finally, an application is given, where a single routine wind speed observation at the coast, combined with air-water temperature differences is used to predict the wind speed at 500m from the coast at heights of 10 and 53 m. The results are in good agreement with the measurements.  相似文献   

2.
A simple algorithm is proposed in order to transform routine surface wind speed observations near the coast to a wind at the height of the equilibrium planetary boundary layer as well as to any other height over a relatively flat coastal region. The model is based on the well known internal boundary layer (IBL) concept, Monin-Obukhov similarity theory and the resistance law, and describes the effects of the roughness transition from sea to land as well as the effect of stability on the shape of the profiles and the IBL growth. The required input weather data are no more than surface wind speed, air temperature and total cloud cover. Satisfactory agreement was found between measurements at Hellinikon airport and estimations made with the scheme. The introduction of a transition layer above the IBL did not improve the agreement to any significant extent. Mean values of the estimated wind differed by less than 1 m s -1 from the observed ones, a difference within the accuracy of the reported rawinsonde values. The rms error varied in the range of 17–22% of the observed average value, giving the best agreement under unstable conditions. The correlation coefficient between the observed and the estimated values of the wind, at the height of the equilibrium planetary boundary layer, ranged between 0.74 and 0.90.  相似文献   

3.
Observations obtained mainly from a research aircraft are presented of the mean and turbulent structure of the stably stratified internal boundary layer (IBL) over the sea formed by warm air advection from land to sea. The potential temperature and humidity fields reveal the vertical extent of the IBL, for fetches out to several hundred of kilometres, geostrophic winds of 20–25 m s–1, and potential temperature differences between undisturbed continental air and the sea surface of 7 to 17 K. The dependence of IBL depth on these external parameters is discussed in the context of the numerical results of Garratt (1987), and some discrepancies are noted.Wind observations show the development of a low-level wind maximum (wind component normal to the coast) and rotation of the wind to smaller cross-isobar flow angles. Potential temperature () profiles within the IBL reveal quite a different structure to that found in the nocturnal boundary layer (NBL) over land. Over the sea, profiles have large positive curvature with vertical gradients increasing monotonically with height; this reflects the dominance of turbulent cooling within the layer. The behaviour is consistent with known behaviour in the NBL over land where curvature becomes negative (vertical gradients of decreasing with height) as radiative cooling becomes dominant.Turbulent properties are discussed in terms of non-dimensional quantities, normalised by the surface friction velocity, as functions of normalised height using the IBL depth. Vertical profiles of these and the normalised wavelength of the spectral maximum agree well with known results for the stable boundary layer over land (Caughey et al., 1979).  相似文献   

4.
Wind profile data within the first two kilometres of a coast have been used to study the wind field modification downstream of this surface discontinuity. The land area is generally very flat, having an overall roughness length of 0.04 m. A wind model, suitable for practical applications and inexpensive to run, has been tested against the data and was found to give satisfactory results. Knowing the climatological statistics of wind and stratification, e.g., at the coast, the model may thus be used to estimate, on a climatological basis, how the wind field is modified with distance inland, at least in areas with only minor topography. This type of information is of great importance when locating wind turbines. It is in these cases also important to know the statistics of the internal boundary-layer (IBL) height, as the turbulence intensity may be quite different in and above the IBL, which in turn may influence load and fatigue calculations. Using the wind profile data, the IBL height was clearly discernible in the majority of cases. Having very unstable stratification over land, the IBL height could, however, not be determined from the wind profiles, as the wind in these cases did not decrease inland. This result was also obtained using the wind model. A simple model of the type z IBL = a · x b, was instead tested, and was shown to give reasonable results.  相似文献   

5.
When air blows across a change in surface roughness, an internal boundary layer (IBL) develops within which the wind adapts to the new surface. This process is well described for short fetches, > 1 km. However, few data exist for large fetches on how the IBL grows to become a new equilibrium boundary layer where again the drag laws can be used to estimate the surface wind.To study this problem, data have been sampled for two years from four 30-m meteorological masts placed from 0 to 30 km inland from the North Sea coast of Jutland in Denmark. The present analysis is limited to neutral stratification, and the surface roughness is the main parameter. The analysis of wind data and two simple models, a surface layer and a planetary boundary layer (PBL) model, are described.Results from both models are discussed and compared with data analysis. Model parameters have been evaluated and the model sensitivity to those parameters has been investigated. Using the model parameters, a large-scale roughness length has been estimated.Istituto Di Fisica dell' Atmosfera I.F.A. — CNR, Rome, Italy.  相似文献   

6.
A two-dimensional numerical mesoscale model is used to investigate the internal structure and growth of the stably stratified internal boundary layer (IBL) beneath warm, continental air flowing over a cooler sea. Two situations are studied — steady-state and diurnally varying offshore flow. In the steady-state case, vertical profiles of mean quantities and eddy diffusion coefficients (K) within the IBL show small, but significant, changes with increasing distance from the coast. The top of the IBL is well defined, with large vertical gradients within the layer and a maximum in the coast-normal wind component near the top. Well away from the coast, turbulence, identified by non-zero K, decreases to insignificant levels near the top of the IBL; the IBL itself is characterised by a critical value of the layer-flux Richardson number equal to 0.18. The overall behaviour of the mean profiles is similar to that found in the horizontally homogeneous stable boundary layer over land.A simple physical model is used to relate the depth of the layer h to several relevant physical parameters viz., x, the distance from the coast and U, the large-scale wind (both normal to the coastline) and g/, being the temperature difference between continental mixed-layer air and sea surface, is the mean potential temperature and g is the acceleration due to gravity. Excellent agreement with the numerical results is found, with h = 0.014x 1/2 U (g/)–1/2.In the diurnally varying case, the mean profiles within the IBL show only small differences from the steady-state case, although diurnal variations, particularly in the wind maximum, are evident within a few hundred kilometres of the coast. A mesoscale circulation normal to the coast, and superimposed upon the mean offshore flow, develops seawards of the coastline with maximum vertical velocities about sunset, of depth about 2 km and horizontal scale 500 km. The circulation is related to the advection, and subsequent decay, of daytime convective turbulence over the sea.  相似文献   

7.
A numerical two-dimensional model based on higher-order closure assumptions is developed to simulate the horizontal microclimate distribution over an irrigated field in arid surroundings. The model considers heat, mass, momentum, and radiative fluxes in the soil-plant-atmosphere system. Its vertical domain extends through the whole planetary boundary layer. The model requires temporal solar and atmospheric radiation data, as well as temporal boundary conditions for wind-speed, air temperature, and humidity. These boundary conditions are specified by an auxiliary mesoscale model and are incorporated in the microscale model by a nudging method. Vegetation parameters (canopy height, leaf-angle orientation distribution, leaf-area index, photometric properties, root-density distribution), soil texture, and soil-hydraulic and photometric properties are considered.The model is tested using meteorological data obtained in a drip-irrigated cotton field located in an extremely arid area, where strong fetch effects are expected. Four masts located 50 m before the leading edge of the field and 10, 30, and 100 m inward from the leading edge are used to measure various meteorological parameters and their horizontal and vertical gradients.Calculated values of air and soil temperatures, wind-speed, net radiation and soil, latent, and sensible heat fluxes agreed well with measurements. Large horizontal gradients of air temperature are both observed and measured within the canopy in the first 40 m of the leading edge. Rate of evapotranspiration at both the upwind and the downwind edges of the field are higher by more than 15% of the midfield value. Model calculations show that a stable thermal stratification is maintained above the whole field for 24 h. The aerodynamic and thermal internal boundary layer (IBL) growth is proportional to the square root of the fetch. This is also the observed rate of growth of the thermal IBL over a cool sea surface.  相似文献   

8.
A model was developed to predict the modification with fetch in offshore flow of mixing ratio, air–water exchange flux, and near-surface vertical gradients in mixing ratio of a scalar due to air–water exchange. The model was developed for planning and interpretation of air–water exchange flux measurements in the coastal zone. The Lagrangian model applies a mass balance over the internal boundary layer (IBL) using the integral depth scale approach, previously applied to development of the nocturnal boundary layer overland. Surface fluxes and vertical profiles in the surface layer were calculated using the NOAA COARE bulk algorithm and gas transfer model (e.g., Blomquist et al. 2006, Geophys Res Lett 33:1–4). IBL height was assumed proportional to the square root of fetch, and estimates of the IBL growth rate coefficient, α, were obtained by three methods: (1) calibration of the model to a large dataset of air temperature and humidity modification over Lake Ontario in 1973, (2) atmospheric soundings from the 2004 New England Air Quality Study and (3) solution of a simplified diffusion equation and an estimate of eddy diffusivity from Monin–Obukhov similarity theory (MOST). Reasonable agreement was obtained between the calibrated and MOST values of α for stable, neutral, and unstable conditions, and estimates of α agreed with previously published parametrizations that were valid for the stable IBL only. The parametrization of α provides estimates of IBL height, and the model estimates modification of scalar mixing ratio, fluxes, and near-surface gradients, under conditions of coastal offshore flow (0–50 km) over a wide range in stability.  相似文献   

9.
Aircraft measurements of potential temperature and turbulent kinetic energy are used to examine the growth of the thermal internal boundary layer (TIBL) in sea-breeze flows on four selected days of a coastal fumigation study performed in 1995 at Kwinana in Western Australia. The aircraft data, together with radiosonde measurements taken on the same days, show a multi-layered low-level onshore flow in the vertical with a superadiabatic layer extending to about 50 m above the water surface on all four days. On the first three days the layer above the superadiabatic layer was neutral, typically 200 m deep, capped by a stably stratified region, whereas on the remaining day it was fully stable. The occurrence of the neutral layer on most experimental days contrasts with the more usual situation involving an entirely stable onshore flow. A composite approach based on both temperature and turbulence data is used to provide a pragmatic but self-consistent definition of the TIBL height. The data for the first three days indicate that the TIBL grows rapidly into the neutrally stratified region to the top of the region within about 2 km from the coast, with a very slow subsequent growth into the stable stratification aloft. On the other hand, the TIBL grows only to about 200 m within a distance of 7 km from the coast on the fourth day due to a strong stable stratification.An existing numerical TIBL model based on the slab approach, capable of describing the TIBL growth in both neutral and stable environments, and a recent analytical model, more efficient for operational use, are used to simulate the aircraft TIBL observations. The predictions by both models agree reasonably well with the data.  相似文献   

10.
The notion of an internal boundary layer (IBL) appeared in studies of local advection within the atmospheric boundary layer when air flows over a change in surface conditions. These include surface roughness, thermal and moisture properties. An ability to predict the height of the IBL interface in the atmosphere under neutral stability, accompanied by certain assumptions on the form of the mean flow parameters, have been a means of obtaining information on the velocity profile after step changes in roughness for more than half a century. A compendium of IBL formulae is presented. The approach based on the diffusion analogy of Miyake receives close attention. The empirical expression of Savelyev and Taylor (2001, Boundary Layer Meteorol. 101, 293–301) suggested that turbulent diffusion is not the only factor that influences IBL growth. An argument is offered that an additional element, mean vertical velocity or streamline displacement, should be taken into account. Vertical velocity is parameterized in terms of horizontal velocity differences employing continuity constraints and scaling. Published data are analyzed from a new point of view, which produces two new neutral stratification formulae. The first implies that the roughness lengths of adjacent surfaces are equally important and a combined length scale can be constructed. In addition new formulae to predict the height of the region of diabatic flow affected by a step change in surface conditions are obtained as an extension of the neutral flow case.  相似文献   

11.
A moving-grid finite-element model has been developed to model numerically the vertically integrated properties of the atmospheric boundary layer (ABL) in one dimension. The model equations for mean wind velocity and potential temperature are combined with a surface energy budget and predictive equations for boundary-layer height to simulate both stable and unstable ABLs. The nodal position defining the top of the boundary layer is one of the model unknowns and is determined by boundary-layer dynamics. The finite-element method, being an integral method, has advantages of accurate representation of both bulk values and their vertical derivatives, the latter being essential properties of the nocturnal boundary layer. Compared with observations and results of other models, the present model predicts bulk properties very well while retaining a simple and economical form.Journal Paper No. J-12996 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2779.  相似文献   

12.
A three-dimensional, non-hydrostatic mesoscale model is used to study boundary-layer structure over an area characterized by the city of Copenhagen, the Øresund strait, and adjacent coastal farmland. Simulations are compared with data obtained on June 5, 1984 during the Øresund experiment.Under moderately strong wind conditions, a stable internal boundary layer (IBL) developed over the Øresund strait during the day. Near-surface winds decelerate over water due to diminished vertical momentum transfer.The turbulent kinetic energy field closely reflects the surface roughness distribution due to the imposed relatively strong wind forcing. TKE budgets over water, farmland and a city area are discussed by inspection of vertical profiles of the individual terms. The buoyancy term is used to indicate IBL heights because it changes sign at the boundary between different stability regimes. Measured and simulated dissipation rates show a decrease in the transition zone as the air travels over water and an abrupt increase when the IBL over a downwind city area is intersected. The top of the stable IBL is characterized by a minimum in the vertical TKE profile.  相似文献   

13.
The derivation of the Panofsky–Dutton internal boundary-layer(IBL) height formula has been revisited. We propose that the upwindroughness length (rather than downwind) should be used in theformula and that a turbulent vertical velocity (w) ratherthan the surface friction velocity (u*) should be considered asthe appropriate scaling for the rate of propagation ofdisturbances into the turbulent flow. A published set ofwind-tunnel and atmospheric data for neutral stratification hasbeen used to investigate the influence of the magnitude ofroughness change on the IBL height.  相似文献   

14.
Several aspects of coastally trapped wave behavior in two-layer models and in continuously stratified models are considered. A two-layer model and a uniformly stratified model are compared over a step shelf showing that, although they predict qualitatively different free-wave dispersion properties, some features of their long wave behavior are qualitatively similar. A sharp pycnocline model (a continuously stratified approximation to the two-layer model) is used to show that the presence of a vertical coastal wall (required in most two-layer models) produces substantial changes in the free-wave behavior. With a vertical coastal wall, baroclinic motions may be trapped close to the coast when the bottom there appears locally flat. Without a vertical coastal wall, such near-cost trapping apparently does not occur and the lowest mode of the sharp pycnocline model behaves more like the lowest mode of a uniformly stratified model.  相似文献   

15.
  相似文献   

16.
B. C. Weare 《Climate Dynamics》2004,22(2-3):281-292
The cloud amounts and liquid and ice water paths as a function of height in five Atmospheric Model Intercomparison Project (AMIP) II models have been compared to International Satellite Cloud Climatology Project (ISCCP) d2 observations. The model layer data have been transformed to the ISCCP low, mid and height cloud amount and vertically integrated water values. In addition a simple radiative transfer model has been used to transform both model output and ISCCP cloud amount and water contents into top of atmosphere albedos for the low, mid and high cloud fractions. Overall, most models represent moderately well the spatial, seasonal and interannual variability of total cloud albedo, which is largely a function of the total cloud amount. The models also tend to predict moderately well the spatial, seasonal, and interannual variability of cloud fraction, but fail to display the observed spatial, and especially, seasonal and interannual variability in cloud water path. In particular nearly all models have mid and low cloud water path variabilities, which are much larger than those observed in the ISCCP observations. This increased cloud water path variability seems to compensate partially for smaller underestimates of cloud fraction variability in most models. Furthermore, variations in cloud amount and cloud water path are much more often negatively correlated in models than in the observations. A simple estimate of the influence of cloud overlap suggests that monthly mean model cloud layers are less stacked in the vertical in models than in an observational estimate based upon a combination of satellite and ground-based observations.  相似文献   

17.
We present a semi-analytical model for the dispersion of passive scalars from continuous ground sources up to distances of a few hundred metres. We attempt to cope with problems typical of analytical models, such as the correct representation of the near-ground concentration and lateral dispersion, while avoiding the use of any empirical parameters. A previous analysis of Prairie Grass Project (PGP) data has shown that the near-ground, cross-wind integrated concentration decreases as some power of the distance from the source that is, itself, distance dependent. As the conventional power-law model is incapable of reproducing this behaviour, we propose a model in which the vertical diffusivity depends on both the height as a power law, and on the distance from the source. For this equation, we construct an infinite-series formal solution, with the first term used as an approximation. A set of equations based on this approximation and on Monin–Obukhov similarity theory is proposed for the the vertical diffusivity, from which the cross-wind integrated concentration is derived analytically. We further construct a simple empirical model for the distance-dependent vertical diffusivity. For the plume lateral width, a Langevin stochastic model depending on the plume height is proposed, whose formal analytical solution is used to derive a set of equations for the cloud width, which are easily solved numerically, with the results validated against PGP data. We apply four statistical measures to evaluate the performance of the model, including the computation of the 95% confidence intervals, for which we find very good agreement. Implementation of this model is extremely simple and computationally efficient.  相似文献   

18.
Simultaneous particle-image velocimetry and laser-induced fluorescence combined with large-eddy simulations are used to investigate the flow and pollutant dispersion behaviour in a rural-to-urban roughness transition. The urban roughness is characterized by an array of cubical obstacles in an aligned arrangement. A plane fence is added one obstacle height h upstream of the urban roughness elements, with three different fence heights considered. A smooth-wall turbulent boundary layer with a depth of 10h is used as the approaching flow, and a passive tracer is released from a uniform line source 1h upstream of the fence. A shear layer is formed at the top of the fence, which increases in strength for the higher fence cases, resulting in a deeper internal boundary layer (IBL). It is found that the mean flow for the rural-to-urban transition can be described by means of a mixing-length model provided that the transitional effects are accounted for. The mixing-length formulation for sparse urban canopies, as found in the literature, is extended to take into account the blockage effect in dense canopies. Additionally, the average mean concentration field is found to scale with the IBL depth and the bulk velocity in the IBL.  相似文献   

19.
A warm on-ice air flow from the open water over the Arctic sea ice in the Fram Straitwas, for the first time, systematically measured on 12 March 1998 by aircraft in thelowest 3 km over a 300-km long distance. The air mass modification and the processesinvolved are discussed.Over the water, air temperature was lower than water temperature so that a convectiveboundary layer (CBL) was present as initial condition. As soon as the CBL passed theice edge, a shallow stable internal boundary layer (IBL) was formed. In the residual CBL, turbulence and pre-existing convective clouds dissolved within about 20 km. Within about the same distance, due to the transition from unstable to stable stratification, the influence of surface friction increased in the IBL and decreased above the IBL with consequent generation of a low-level jet at IBL top. The IBL was strongly stratified with respect to both temperature and wind. The wind shear was around 0.1 s-1 so that the Richardson number in the IBL was subcritical and turbulence was generated. The IBL top grew to about 145 m over 230 km distance. The growth of the IBL was not monotonic and was influenced by (a) inhomogeneous ice surface temperatures causedby both different ice thickness and changes in the cloud conditions, and (b) leads in theice deck. At the front side of the on-ice flow, the air mass boundary between the warmair and the cold Arctic air was sharp (12 K over 10 km) at low levels and tilted withheight. Observations suggest that the stratified IBL was lifted as a slab on top of thecold air.  相似文献   

20.
During a whole growing season, the evolution of the displacement height, d, and roughness length, z 0, of a maize crop has been estimated by a measurement programme. The results have been used to check different types of existing models to calculate these parameters from canopy characteristics only; a simple geometric model and two matching models have been investigated. A geometric model is based on geometric features of the surface only. After a simple modification, the geometric model gives good results for the displacement height as well as for the roughness length.A matching model, based on gradient-diffusion theory, yields good results for the displacement height. The roughness parameter, however, is overestimated by 17%. By a simple modification, the model results could be improved considerably.A matching model, based on a second-order closure procedure, yields excellent results for the displacement height and good results for the roughness length. But it appears that, when applying this model, the plant density index and plant area density distribution as a function of height must be well known.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号