首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Historical eruptions have produced lahars and floods by perturbing snow and ice at more than 40 volcanoes worldwide. Most of these volcanoes are located at latitudes higher than 35°; those at lower latitudes reach altitudes generally above 4000 m. Volcanic events can perturb mantles of snow and ice in at least five ways: (1) scouring and melting by flowing pyroclastic debris or blasts of hot gases and pyroclastic debris, (2) surficial melting by lava flows, (3) basal melting of glacial ice or snow by subglacial eruptions or geothermal activity, (4) ejection of water by eruptions through a crater lake, and (5) deposition of tephra fall. Historical records of volcanic eruptions at snow-clad volcanoes show the following: (1) Flowing pyroclastic debris (pyroclastic flows and surges) and blasts of hot gases and pyroclastic debris are the most common volcanic events that generate lahars and floods; (2) Surficial lava flows generally cannot melt snow and ice rapidly enough to form large lahars or floods; (3) Heating the base of a glacier or snowpack by subglacial eruptions or by geothermal activity can induce basal melting that may result in ponding of water and lead to sudden outpourings of water or sediment-rich debris flows; (4) Tephra falls usually alter ablation rates of snow and ice but generally produce little meltwater that results in the formation of lahars and floods; (5) Lahars and floods generated by flowing pyroclastic debris, blasts of hot gases and pyroclastic debris, or basal melting of snow and ice commonly have volumes that exceed 105 m3.The glowing lava (pyroclastic flow) which flowed with force over ravines and ridges...gathered in the basin quickly and then forced downwards. As a result, tremendously wide and deep pathways in the ice and snow were made and produced great streams of water (Wolf 1878).  相似文献   

2.
Waste water from ammunition production sites and aqueous samples (ground and surface water) on or near former military sites on which explosives were produced or filled, e.g. into shells, may be contaminated by the original explosives—mainly nitrotoluenes (such as dinitrotoluenes, trinitrotoluene (TNT)) and nitramines (such as hexogen (RDX), octogen (HMX), and tetryl) or hexyl, but also by byproducts and compounds formed by biodegradation of the explosives such as aminonitrotoluenes, chlorinated nitrobenzenes and nitrophenols. These compounds can be extracted from aqueous samples by liquid/liquid extraction (using dichloromethane or toluene) or by solid phase extraction using C-18 adsorbents with high recoveries (usually ≥85%) provided they contain only one amino group. Nitrotoluenes, chlorinated nitrobenzenes and aminonitrotoluenes (nitrotoluidines) may be determined by gas chromatography (GC) using selective detectors such as an electron capture detector (ECD), a nitrogen-phosphorus detector (NPD) or a chemiluminescence detector (thermal energy analyzer, TEA). The use of combined gas chromatography/mass spectrometry (GC/MS) under electron impact conditions is even more specific. Detection limits comparable to an ECD or NPD, however, are only achieved if the mass spectrometer is operated under selected ion monitoring (SIM). Nitrophenols are derivatized after extraction by heptafluorobutyric anhydride or by acetic anhydride where the latter method can be directly applied to the aqueous sample. The nitramine explosives, such as RDX, HMX, and tetryl, hexyl, the nitrate esters, such as nitropenta (PETN) and nitroguanidine as well as picric acid cannot, or only with difficulty, be analyzed by gas chromatography. They may be determined by high performance liquid chromatography (HPLC) with UV-detection. The HPLC analysis can be extended to include also nitrotoluenes and nitroaminotoluenes.  相似文献   

3.
In natural waters arsenic normally occurs in the oxidation states +III (arsenite) and +V (arsenate). The removal of As(III) is more difficult than the removal of As(V). Therefore, As(III) has to be oxidized to As(V) prior to its removal. The oxidation in the presence of air or pure oxygen is slow. The oxidation rate can be increased by ozone, chlorine, hypochlorite, chlorine dioxide, or H2O2. The oxidation of As(III) is also possible in the presence of manganese oxide coated sands or by advanced oxidation processes. Arsenic can be removed from waters by coprecipitation with Fe(OH)3, MnO2 or during water softening. Fixed‐bed filters have successfully been applied for the removal of arsenic.The effectiveness of arsenic removal was tested in the presence of adsorbents such as FeOOH, activated alumina, ferruginous manganese ore, granular activated carbon, or natural zeolites. Other removal technologies are anion exchange, electrocoagulation, and membrane filtration by ultrafiltration, nanofiltration or reverse osmosis.  相似文献   

4.
Methods for the determination of three compound classes, i. e. diaminotoluenes, nitrophenols, and chloroaromatics in groundwater of a former ammunition plant are reported. Diaminotoluenes were extracted by discontinuous liquid/liquid-, nitrophenols by continuous liquid/liquid-extraction using dichloromethane, and chloroaromatics by solid-phase extraction. These compound classes may be analyzed by gas chromatography (GC) or gas chromatography coupled to mass spectrometry (GC/MS) without derivatization or after derivatization with N-methyl-bis(trifluoroacetamide) (MBTFA) or heptafluorobutyric anhydride (HFBA) in the case of diaminotoluenes and HFBA or acetic anhydride in the case of nitrophenols. An atomic emission detector (AED) coupled to a gas chromatograph may be employed for the analysis of chloroaromatics. High selectivity can be achieved using the characteristic wavelengths of chlorine. A variety of these compounds were identified and quantified in a groundwater sample from the former ammunition plant Elsnig (Saxony, Germany). Concentrations were in the lower ppb range. Thus, dichlorobenzenes which may have been used as substituents at the end of World War II could be identified in groundwater samples at this site.  相似文献   

5.
Application of the inversion technique described in Part I [1] to models in which the depleted (MORB) mantle is created by extraction of continental crust results in a stable and self-consistent set of model data, including estimates of uncertainties on all the parameters. The inversion shows that the mean age of the continents (and of the depleted mantle) is 2.14–2.46 b.y., and that the lower crust must be depleted in Rb by a factor of ～ 4 relative to the upper crust. The fraction of total mantle which has been depleted ranges over wide limits (30–90%) depending on: (a) whether the lower mantle is considered to be virgin, or somewhat depleted; (b) whether the depleted reservoir is represented in Sm/Nd and Rb/Sr systematics by average values of MORB, or by extreme values of MORB, and (c) whether the bulk earth Nd content is presumed to be similar to E or H chondrites, or is higher than all known meteorite classes. The usefulness of crust-mantle budget models in constraining such questions as whole mantle versus two-layer mantle convection will be enhanced by better data and understanding in these three key areas of geochemistry.  相似文献   

6.
The rotation of the Earth is predicted to have a strong influence on the convective motions in basaltic magmas which cool at high and intermediate latitudes on the Earth's surface. Convection in layers greater than 100 m deep is characterised by large Taylor numbers and small Rossby numbers, for which laboratory experiments provide evidence of strong rotationally-induced flows. In the case of convection driven by either thermal or compositional buoyancy fluxes from horizontal top or bottom boundaries Coriolis forces induced by the Earth's rotation are expected to cause the turbulent convective motions to form into intense vortices whose axes tend to be close to the vertical. These vortices should be tall and thin, be very unsteady, and have rapid vertical motion in their cores. Earth's rotation is likely to have little or no effects on convection in very shallow convecting layers ( < 100 m) of basaltic magmas or in chambers of more viscous (granitic) magmas. When convection is driven by horizontal density differences (such as those produced by cooling or crystallization at sloping or vertical walls or by simple lateral variation of layer depth) in basaltic chambers of order 10 km or greater in width the rotation of the Earth may cause relatively rapid horizontal (geostrophic) circulation over the lateral scales of the chamber. These predictions involve some extrapolation of fluid dynamical principles from laboratory to magma chamber conditions. Speculative comments on some possible petrological implications are included.  相似文献   

7.
罗灼礼  王伟君 《地震》2012,32(3):1-14
地震事件一般具有离散性, 即它们的发生和转移具有一定的时间和空间间隔。 当孕震系统处于平衡(或正常)状态时, 系统状态变量X(这里以地震活动性为例)的时间序列概率分布表现为单峰型(如泊松分布); 其时间间隔(或等候时间)Δt分布可用负指数分布来描述。 当系统处于非平衡(或异常)状态时, X的概率分布表现为双峰型或多峰型, 其时间间隔Δt(或空间间隔ΔS)可采用幂函数关系来描述。 可以计算X的1~4阶矩统计参数识别X的概率分布性质, 进一步判断系统所处的状态。 根据这个思路, 本文尝试针对地震活动性的群体概率特征, 探索研究地震活动系统时间和空间结构的演变以及正常和异常状态的辨别, 并将这些方法应用于2008年汶川8.0级地震及其余震趋势和强余震预测实践。  相似文献   

8.
Anticipating geomorphic tipping points requires that we learn from the past. Major geomorphic changes in coastal plain rivers of Texas resulting in river metamorphosis or regime shifts were identified and the major driving factors determined. Eleven such transformations – possible tipping points – were identified from contemporary observations, historical records, and Quaternary reconstructions. Two of the tipping points (between general aggrading and degrading valley states) are associated with reversals in a fundamental system control (sea‐level). One (stable or aggrading versus degrading channels) is associated with an abrupt change in sediment supply due to dam construction, and two others (changes from meandering to anastomosing channel patterns, and different anastomosis styles) are similarly related to changes in sediment supply and/or transport capacity, but with additional elements of historical contingency. Three tipping points are related to avulsions. One, from a regime dominated by re‐occupation of former channels to one dominated by progradation into flood basins, is driven by progressive long‐term filling of incised valleys. Another, nodal avulsions, is triggered by disturbances associated with tectonic uplift or listric faults. The third, avulsions and related valley metamorphosis in unfilled incised valleys, is due to fundamental dynamical instabilities within the fluvial system. This synthesis and analysis suggests that geomorphic tipping points are sometimes associated with general extrinsic or intrinsic (to the fluvial system) environmental change, independent of any disturbances or instabilities. Others are associated with natural (e.g. tectonic) or human (dams) disturbances, and still others with intrinsic geomorphic instabilities. This suggests future tipping points will be equally diverse with respect to their drivers and dynamics. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

9.
地磁加卸载响应比与地震对应关系研究   总被引：2，自引：0，他引：2  
通过对浙、沪、苏邻近 4个地磁观测点的近十年的资料,及邻近区域10个地震进行了每日Z分量日变幅加卸载响应比随时间变化和响应比月均值的相关研究。结果表明:加卸载响应比阈值P0(Z) 和响应比月均值PM(Z)的大小与地震的震级、震中距及异常出现的早晚并非完全呈线性相关;当响应比值大于某一阈值时,有可能发生一定震级的地震 ;按该方法结果综合分析,截止1998年9月底,未来1年左右的时间内在该研究区域或更大范围(含台湾区域)有可能发生6级左右的地震。该方法可作为分析预报手段参与中短期和短临地震趋势判断的一种新方法。  相似文献   

10.

There are six distinct classes of gold deposits, each represented by metallogenic provinces, having 100's to >1000 tonne gold production. The deposit classes are: (1) orogenic gold; (2) Carlin and Carlin-like gold deposits; (3) epithermal gold-silver deposits; (4) copper-gold porphyry deposits; (5) iron-oxide copper-gold deposits; and (6) gold-rich volcanic hosted massive sulfide (VMS) to sedimentary exhalative (SEDEX) deposits. This classification is based on ore and alteration mineral assemblages; ore and alteration metal budgets; ore fluid pressure(s) and compositions; crustal depth or depth ranges of formation; relationship to structures and/or magmatic intrusions at a variety of scales; and relationship to the P-T-t evolution of the host terrane. These classes reflect distinct geodynamic settings. Orogenic gold deposits are generated at mid-crustal (4–16 km) levels proximal to terrane boundaries, in transpressional subduction-accretion complexes of Cordilleran style orogenic belts; other orogenic gold provinces form inboard, by delamination of mantle lithosphere, or plume impingement. Carlin and Carlin-like gold deposits develop at shallow crustal levels (<4 km) in extensional convergent margin continental arcs or back arcs; some provinces may involve asthenosphere plume impingement on the base of the lithosphere. Epithermal gold and copper-gold porphyry deposits are sited at shallow crustal levels in continental margin or intraoceanic arcs. Iron oxide copper-gold deposits form at mid to shallow crustal levels; they are associated with extensional intracratonic anorogenic magmatism. Proterozoic examples are sited at the transition from thick refractory Archean mantle lithosphere to thinner Proterozoic mantle lithosphere. Gold-rich VMS deposits are hydrothermal accumulations on or near the seafloor in continental or intraoceanic back arcs.

The compressional tectonics of orogenic gold deposits is generated by terrane accretion; high heat flow stems from crustal thickening, delamination of overthickened mantle lithosphere inducing advection of hot asthenosphere, or asthenosphere plume impingement. Ore fluids advect at lithostatic pressures. The extensional settings of Carlin, epithermal, and copper-gold porphyry deposits result from slab rollback driven by negative buoyancy of the subducting plate, and associated induced convection in asthenosphere below the over-riding lithospheric plate. Extension thins the lithosphere, advecting asthenosphere heat, promotes advection of mantle lithosphere and crustal magmas to shallow crustal levels, and enhances hydraulic conductivity. Siting of some copper-gold porphyry deposits is controlled by arc parallel or orthogonal structures that in turn reflect deflections or windows in the slab. Ore fluids in Carlin and epithermal deposits were at near hydrostatic pressures, with unconstrained magmatic fluid input, whereas ore fluids generating porphyry copper-gold deposits were initially magmatic and lithostatic, evolving to hydrostatic pressures. Fertilization of previously depleted sub-arc mantle lithosphere by fluids or melts from the subducting plate, or incompatible element enriched asthenosphere plumes, is likely a factor in generation of these gold deposits. Iron oxide copper-gold deposits involve prior fertilization of Archean mantle lithosphere by incompatible element enriched asthenospheric plume liquids, and subsequent intracontinental anorogenic magmatism driven by decompressional extension from far-field plate forces. Halogen rich mantle lithosphere and crustal magmas likely are the causative intrusions for the deposits, with a deep crustal proximal to shallow crustal distal association. Gold-rich VMS deposits develop in extensional geodynamic settings, where thinned lithosphere extension drives high heat flow and enhanced hydraulic conductivity, as for epithermal deposits. Ore fluids induced hydrostatic convection of modified seawater, with unconstrained magmatic input. Some gold-rich VMS deposits with an epithermal metal budget may be submarine counterparts of terrestrial epithermal gold deposits. Real time analogs for all of these gold deposit classes are known in the geodynamic settings described, excepting iron oxide copper-gold deposits.

  相似文献   

11.
Many sedimentary basins throughout the world exhibit areas with abnormal pore-fluid pressures (higher or lower than normal or hydrostatic pressure). Predicting pore pressure and other parameters (depth, extension, magnitude, etc.) in such areas are challenging tasks. The compressional acoustic (sonic) log (DT) is often used as a predictor because it responds to changes in porosity or compaction produced by abnormal pore-fluid pressures. Unfortunately, the sonic log is not commonly recorded in most oil and/or gas wells. We propose using an artificial neural network to synthesize sonic logs by identifying the mathematical dependency between DT and the commonly available logs, such as normalized gamma ray (GR) and deep resistivity logs (REID). The artificial neural network process can be divided into three steps: (1) Supervised training of the neural network; (2) confirmation and validation of the model by blind-testing the results in wells that contain both the predictor (GR, REID) and the target values (DT) used in the supervised training; and 3) applying the predictive model to all wells containing the required predictor data and verifying the accuracy of the synthetic DT data by comparing the back-predicted synthetic predictor curves (GRNN, REIDNN) to the recorded predictor curves used in training (GR, REID). Artificial neural networks offer significant advantages over traditional deterministic methods. They do not require a precise mathematical model equation that describes the dependency between the predictor values and the target values and, unlike linear regression techniques, neural network methods do not overpredict mean values and thereby preserve original data variability. One of their most important advantages is that their predictions can be validated and confirmed through back-prediction of the input data. This procedure was applied to predict the presence of overpressured zones in the Anadarko Basin, Oklahoma. The results are promising and encouraging.  相似文献   

12.
To simulate the behavior of radionuclides along a salinity gradient, in vitro sorption and desorption kinetics of Co, Mn, Cs, Fe, Ag, Zn and Cd were studied in Loire river water and the macrotidal Loire estuarine water over two different seasons. Partitioning between the dissolved phase and suspended solids were followed up over 100 h after adding radioactive tracers to freshly collected freshwater (sorption stage); this stage was followed by desorption in fresh and estuarine waters. A kinetic model describing the interactions between trace metals and particles under a salinity gradient was developed and calibrated. Among parameters and/or processes that control the fate and behavior of contaminated particles during their transfer in estuarine systems, this study shows that the speciation of trace metals is controlled by: (i) the chemical water composition: for all the elements except for Fe, desorption increased with salinity; however, the amplitude of such an effect strongly depended on the element and/or on the composition of the particulate phase (and consequently on the season); (ii) the possibility for a given element to form (or not) stable surface particle moieties such as oxides or inner-sphere complexes; (iii) the distribution of a given element among different types of sites characterised by different binding forces that can lead (or not) to re-adsorption processes after mixing of contaminated particles with uncontaminated water.Our model enabled the quantification of the contribution and the characteristic time of reactions that took place over short and long periods on the global partitioning between particulate and dissolved phases during sorption and desorption and to determine the extent to which these reactions were modified by the salinity.  相似文献   

13.
行星际磁场扇形结构对中低纬地磁场的影响   总被引：1，自引：0，他引：1       下载免费PDF全文
本文用特征向量分析法对1973年北京地磁台水平磁场强度H的时均值资料进行了研究,识别出了行星际磁场扇形效应对中低纬地磁场H日变化的贡献。研究结果表明,中低纬扇形效应约为3-5nT的数量级,分点月最大（～5nT）,冬季最小（～3nT）。当扇形磁场背离太阳时,扇形效应引起白天H增大,夜间减小;当扇形磁场朝向太阳时,H的变化相反。用第一特征向量推断行星际磁场的扇形极性,其符合率在两分点月份和夏季达到70％左右,冬季低于50％,暗示了冬季反向扇形效应的存在。  相似文献   

14.
In recent years, several sets of legislation worldwide (Oceans Act in USA, Australia or Canada; Water Framework Directive or Marine Strategy in Europe, National Water Act in South Africa, etc.) have been developed in order to address ecological quality or integrity, within estuarine and coastal systems. Most such legislation seeks to define quality in an integrative way, by using several biological elements, together with physico-chemical and pollution elements. Such an approach allows assessment of ecological status at the ecosystem level ('ecosystem approach' or 'holistic approach' methodologies), rather than at species level (e.g. mussel biomonitoring or Mussel Watch) or just at chemical level (i.e. quality objectives) alone. Increasing attention has been paid to the development of tools for different physico-chemical or biological (phytoplankton, zooplankton, benthos, algae, phanerogams, fishes) elements of the ecosystems. However, few methodologies integrate all the elements into a single evaluation of a water body. The need for such integrative tools to assess ecosystem quality is very important, both from a scientific and stakeholder point of view. Politicians and managers need information from simple and pragmatic, but scientifically sound methodologies, in order to show to society the evolution of a zone (estuary, coastal area, etc.), taking into account human pressures or recovery processes. These approaches include: (i) multidisciplinarity, inherent in the teams involved in their implementation; (ii) integration of biotic and abiotic factors; (iii) accurate and validated methods in determining ecological integrity; and (iv) adequate indicators to follow the evolution of the monitored ecosystems. While some countries increasingly use the establishment of marine parks to conserve marine biodiversity and ecological integrity, there is awareness (e.g. in Australia) that conservation and management of marine ecosystems cannot be restricted to Marine Protected Areas but must include areas outside such reserves. This contribution reviews the current situation of integrative ecological assessment worldwide, by presenting several examples from each of the continents: Africa, Asia, Australia, Europe and North America.  相似文献   

15.
The analysis of drainage network composition   总被引：1，自引：0，他引：1  
The Horton method of analyzing drainage network composition is reviewed, with the conclusion that it has not been very effective either in improving understanding or in developing useful methods of characterizing drainage basins. New methods which are based on the link rather than the Horton (or Strahler) stream are described. A number of detailed examples of the application of these new methods to the topologic and geometric properties of networks are provided. The results are compared with the predictions of the random model. Data used in the analysis were obtained from 1:24,000 U.S.G.S. topographic maps of eastern Kentucky. Thirty drainage basins were selected and their channel networks were outlined first by the contour-crenulation (CC) method and then by another, more objective, method (SC) in which stream sources were identified by a quantitative slope criterion. The CC and SC samples comprise about 8,700 and 1,700 links, respectively. The three most important results of the analysis are: (1) the channel networks are slightly but significantly more elongated than predicted by the random model, (2) there are fewer second magnitude links than predicted, and (3) the length distribution for interior links depends upon the kind of link (interior or exterior) joined downstream. These features are found in both CC and SC networks.  相似文献   

16.
Shlomo P. Neuman 《水文研究》2011,25(11):1837-1840
It has been previously demonstrated theoretically and numerically by the author that square or absolute increments of data sampled from fractional Brownian/Lévy motion (fBm/fLm), or of incremental data sampled from fractional Gaussian/Lévy noise (fGn/fLn), exhibit apparent/spurious multifractality. Here, we generalize these previous development in a way that (a) rigorously subordinates (truncated) fLn to fGn or, in a statistically equivalent manner, (truncated) fLm to fBm; (b) extends the analysis to a wider class of subordinated self‐affine processes; (c) provides a simple way to generate such processes and (d) explains why the distribution of corresponding increments tends to evolve from heavy tailed at small lags (separation distances or scales) to Gaussian at larger lags. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

17.
Expanded beam microprobe analyses of 18 drop-formed chondrules and 5 irregular masses of devitrified glass in the Manych chondrite show trends and ranges of chemical variation similar to those reported previously for large microporphyritic chondrules in this meteorite. These variations are inconsistent with differentiation of chondrules by crystal-liquid fractionation or separation of immiscible silicate and Fe-Ni-S liquids at various oxygen fugacities. They appear to reflect non-representative sampling of microporphyritic precursor rocks texturally and mineralogically similar to, but in some cases coarser than, the microporphyritic chondrules in Manych. About half of the droplet chondrules and devitrified glasses also bear evidence of more or less vapor-liquid fractionation.The chemical and petrographic properties of Manych chondrules are best explained by a genetic model which entails: (1) melting of extended masses of chondritic material (≥10 cm across); (2) extraction of immiscible Fe-Ni-S liquids; (3) crystallization of the remaining silicate liquids to form microporphyritic rocks; and (4) fragmentation of these rocks to produce microporphyritic chondrules or, with remelting, droplet chondrules. The initial melting may have been caused by either impact or solar heating, but fragmentation and remelting of the microporphyritic precursor rocks were most likely caused by impact.  相似文献   

18.
本文主要借鉴了Lee(2007)和Youngs(2003)提出的地表永久位移估计方法,联合中国第四代地震区划图的潜在震源区参数,给出了适合中国跨越发震断层永久位移概率分析方法。震害调查表明,近场的结构破坏不仅是地震动引起的,地震地表的破裂或永久位移引起的破坏也占很大比重。应用与概率估计地震动相似的方法,给出不同概率水准的地震地表永久位移,使之服务于穿越地震发震断层管线、桥梁工程的抗震设防,采取有效的抗御永久地表位移措施,减小地震灾害带来的损失。  相似文献   

19.
Ultrasonic data for the velocities of the low- and high-pressure polymorphs of germanate compounds undergoing the pyroxene-garnet (CaGeO3, CdGeO3) and pyroxene-ilmenite (MgGeO3, MnGeO3) phase transformations have been determined as a function of pressure to 7.5 kbar at room temperature for polycrystalline specimens hot-pressed at pressures up to 60 kbar. These transitions are characterized by the following velocity (υ)-density (ρ) relationships: (1) the velocity jumps are comparable in percentage magnitude to the density jumps, with the exception of shear velocity for the pyroxene-ilmenite transition; (2) the ratio (υp/υs) of the compressional to shear velocity is constant or increases slightly across the transitions; and (3) low slopes (linear or logarithmic) on υ-ρ diagrams. The observed relationships (1) and (2) are similar to those for the coesite-stishovite transition, but are in marked contrast with those from the olivine-spinel and olivine-beta phase transformations. Coordination changes are thus important factors to be considered in establishing velocity-density systematics governing polymorphic transitions. The υ-ρ changes across the pyroxene-garnet and pyroxene-ilmenite transitions are also distinctly smaller than those produced by compression or thermal expansion of a homogeneous material or by varying composition at constant mean atomic weight. Systematic trends in the elastic properties for isostructural sequences support the concept of germanates as models for the elasticity of their silicate analogues; this scheme is applied to estimate the bulk moduli of the garnet (1.80 Mbar) and ilmenite (2.11 Mbar) polymorphs of MgSiO3.  相似文献   

20.
Although trace element modeling has been used to great advantage for petrogenetic interpretations of basaltic systems, similar studies on igneous rocks of granitic composition have been fewer. In general the mineral/melt distribution coefficients for rare earth elements (REE) in granitic melts are equal to or greater than those for similar minerals in the basaltic system. Thus the effects of these minerals on the REE patterns of granitic melts during partial melting or differentiation are exaggerated as compared to basaltic systems, making detection of residual phases easier. For the K/Rb ratio, if neither a K-feldspar component nor biotitephlogopite is present in the residue, it is difficult to reduce the K/Rb ratio of the melt relative to the parent by a factor of two by either differentiation or partial melting.The petrogenesis of four distinctly different rocks are received: (1) an Archean tonalite presumably derived by partial melting of an Archean tholeiite at mantle depths, leaving a garnet plus clinopyroxene residue; (2) an Archean quartz monzonite presumably derived by partial melting of a short-lived graywacke-argillite sequence at crustal depths; (3) a dacite from Saipan presumably derived by differentiation from a basaltic parent; and (4) a trachyte from Ross Island, Antarctica, presumably derived by differentiation from a basanitoid parent and contaminated by continental crustal components.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号