共查询到17条相似文献，搜索用时 156 毫秒
1.
本文采用有限元法对高层建筑上部结构—桩筏基础—地基共同作用及相互影响进行了研究。研究表明:高层建筑上部结构—桩筏基础—地基共同作用及相互影响时,基础总体沉降和差异沉降随楼层的增加呈非线性变化趋势,上部结构中存在次应力,弯矩和轴力比常规法设计偏大;随楼层的增加,桩体对荷载的分担比在减少,土体分担比在增加;随着上部结构刚度的增加,荷载向角桩、边桩集中;增加筏板厚度,能减少一定的差异沉降和基础平均沉降,从而减少上部结构的次应力,提高地基土的荷载分担比,同时筏板下桩顶反力分布更不均匀,因此需要从筏板受力,以及考虑筏下桩、土的受力来综合确定一个合理的筏板厚度,使设计安全经济;随着地基土变形模量的提高,地基土分担的上部荷载增加,桩顶反力趋向平均,筏板最大弯矩逐渐减小。桩筏基础在均匀布桩条件下呈中间大边缘小的“碟型”分布。差异沉降是由于上部结构次生应力和筏板内力产生的。通过对地基土刚度以及桩长、桩径、桩距等五种桩基刚度的调整,并分析不同刚度对基础差异沉降影响可知:改变桩长的布桩形式并结合地基土刚度调整的中心布桩形式是高层建筑桩筏基础最佳设计方案。 相似文献
2.
针对刚性筏板下群桩基础优化设计问题进行分析,通过改变桩长分布来调整各桩的荷载分担,群桩分析采用基于弹性理论的积分方程方法,并通过cut-off方法来反映桩的弹塑性特性,实现群桩基础的弹塑性优化分析,改进了常规弹性分析方法的缺陷。算例分析表明,随着外荷载的不断增加,角桩首先达到极限荷载,对角桩超出极限荷载的部分进行重新分布,继而使得边桩逐渐达到极限承载状态,继续加载直至内桩也达到极限承载状态,从而引起桩筏基础的整体破坏。采用cut-off方法可以改进基础变刚度优化设计,使之与实际情况更为吻合。 相似文献
3.
桩土应力比是刚性桩复合地基的一个重要设计参数,通过对沪宁城际铁路路基试验段CFG桩-筏(网)和PHC桩-筏复合地基桩土应力进行长期观测,分析了桩土应力变化规律,对桩土应力横向分布、桩间土应力变化、桩土应力比及荷载分担比等进行了对比研究。研究表明:桩土应力比与填筑荷载成非线性关系,与桩土相对刚度密切相关;桩土应力横向呈不规则锯齿形分布,桩顶应力集中现象明显,桩间土承载作用在填筑初期得到了充分发挥,桩土差异沉降迫使桩顶承受更多荷载,褥垫层和土工格栅调整了桩土荷载分担,揭示了路堤荷载作用下桩-筏(网)复合地基承载机制。 相似文献
4.
桩筏基础相互作用分析 总被引：1，自引：0，他引：1
提出了考虑土-桩-筏相互作用的迭代分析方法,可获得筏板的内力和桩身轴力等.考虑了桩筏基础下群桩效应作用的群桩桩顶反力分布、群桩桩端力分布及桩与桩相互作用等问题,使得计算的群桩单桩刚度较合理.同时,具有能考虑土的非线性、成层地基及利用单桩静载试验成果反演分析所得参数运用于群桩分析等特点.采用的8节点等参板单元可适用于分析平面不规则形状及变厚度的薄筏板和厚筏板.用笔者提出的方法对桩筏基础实例进行了分析,研究了桩长对该桩筏基础相互作用的影响,并与实测成果及其他学者研究成果进行了对比,表明了该方法能较合理地分析桩筏基础相互作用. 相似文献
5.
考虑基础刚度影响的风机梁板式桩筏基础模型试验研究 总被引：2，自引：0，他引：2
梁板式桩筏基础作为新型风机基础,前景广阔,适当优化结构,可节约成本。采用大型室内模型试验,研究了梁板式桩筏基础在不同筏板刚度情况下的受力变形特性,同时讨论了桩土荷载分担比的关系。研究表明,在工作荷载范围内,适当增大筏板刚度,桩平均轴力增加,外圈桩承担的荷载增大,内圈桩的轴力减小,环梁及肋梁弯矩减小,但继续增加刚度,对桩身轴力、环梁弯矩、肋梁弯矩的影响并不大;随着荷载的增大,土体承担的荷载比逐步增大,趋于稳值。随着梁板式基础刚度增加,基础内外差异沉降减少,但是达到一定刚度后再增加刚度对变形影响较小。梁板式基础刚度的变化会影响基底反力分布的均匀性,且存在一个最优刚度,使基础底部反力分布最为均匀,本次试验中12梁的梁板式基础基底反力比6梁和实体基础更均匀。桩基的分布和梁的分布存在相互影响,改变梁的分布会影响桩顶力,而桩基在梁底下又会使梁的应力产生重新分布。研究成果可为设计桩筏基础提供参考依据。 相似文献
6.
根据群桩中桩侧摩阻力分布规律,在桩筏基础中基于弹性理论中的变形协调关系、桩体物理方程和力的平衡关系,推导了竖向荷载作用下桩筏基础的荷载和位移之间的刚度矩阵,从而提出了一种刚性板下桩筏基础的分析方法。刚性板桩筏基础分析中考虑了4种相互作用,分别为桩-土-桩、桩-土-板、板-土-桩和板-土-板相互作用。基础中各桩可具有不同的桩长、桩半径和刚度等特性。应用该方法不需要划分桩-土体单元,分析中的计算矩阵仅与基础中桩数和筏板下土节点数量相关而与其他变量无关,分析过程简洁通用。通过与各种分析方法的比较验证,证明该方法是合理可行的。 相似文献
7.
提出一种层状地基中柔性筏板-群桩共同作用分析方法,探讨筏板刚度对桩筏基础沉降的影响,并成功预测了往复荷载下桩筏基础的长期沉降。筏板刚度采用Mindlin板理论的有限单元法分析;桩-土体系的刚度矩阵中,桩顶面-桩顶面、桩顶面-土表面以及土表面-土表面的相互作用分析采用层状剪切位移法借助层状地基的Burmister位移解求得。基于层状地基中柔性筏板-群桩的沉降计算方法以及往复荷载下土体压缩模量的衰减特性得到了桩筏基础的长期沉降预测方法。与已有文献方法和离心模型试验结果的对比分析表明,柔性筏板-群桩共同作用方法得到的沉降值具有较高的精度。 相似文献
8.
当前虽然已有考虑桩筏非线性的设计,但仍无人在此基础上,考虑上部结构。因此考虑上部结构,进一步认识其与桩筏基础非线性共同作用机理,优化桩筏基础设计,具有重要的现实意义。本文以子结构法凝聚上部结构的荷载及刚度,以平面壳体单元模拟筏板,按有限层法模拟桩土之间的弹性相互作用,用广义剪切位移法模拟桩的非线性工作性状,建立了一种考虑上部结构共同作用的桩筏基础非线性分析方法,并编制了分析程序。通过实例分析,探讨了上部结构与桩筏基础非线性共同作用的机理,研究了合理布桩方式,探讨了以差异沉降为目标的优化设计的可能途径。 相似文献
9.
能量桩兼具承担上部荷载和传递浅层地温能双重功能,能量桩的换热与承载特性逐渐成为广大工程技术人员关注的重点问题。然而,针对桩?筏基础中能量桩的热?力耦合特性的现场实测资料仍相对较少。提出将桩基完整性检测中的声测管底端连接贯通,作为能量桩的换热管,形成新型能量桩埋管形式;在桩?筏基础中能量桩运行状态下,开展桩?筏基础热力响应特性、能量桩对筏板应力影响的现场试验,实测获得桩身温度、桩身应力及筏板应力变化规律。研究结果表明,该试验条件下,能量桩（1U埋管、有效深度为12.8 m、桩顶埋深为5.5 m）的换热效率约为80～90 W/m;无上部荷载、能量桩加热状态下,筏板上边缘呈现出一定的拉应力,值得工程技术人员关注。 相似文献
10.
桩筏基础由桩和筏组成一种联合基础，筏将大部分总荷载传递给桩，同时其本身也承担总荷载的一部分。因此，充分认识桩筏基础对上部荷载向地基土的传递特性是非常必要的。该文提出一个桩筏基础传递荷载的计算模型，模型考虑了桩的布置形式对地基接触压力的影响，同时还考虑了桩的受荷过程中的变化特性，并详细分析了桩与筏之间的荷载分配问题。 相似文献
11.
Disconnected piled raft foundations are characterised by no structural connection between the upper raft and the underlying piles, mostly playing the role of settlement-reducers. The resulting raft–pile gap is usually filled with a granular interlayer, through which the loads from the superstructure are transferred to the piles.In this paper, the complex interaction mechanisms involving the foundational components (raft, piles and soil) are numerically investigated by means of 3D finite elements analyses, accounting for soil non-linearity. The main features of the soil–structure interaction mechanisms under purely vertical external loads are explored over a realistic range of raft–soil gaps for different pile configurations, in which the number of piles – i.e. their spacing – is varied. Special attention is also devoted to the structural response of the piles in terms of axial and bending internal stress resultants. In particular, while disconnection beneficially affects the structural pile response, increasing the raft–pile gap tends to reduce the overall settlement/stiffness efficiencies.The numerical results being presented are in substantial agreement with the outcomes from literature small-scale experiments and suggest a number of relevant theoretical inferences. 相似文献
12.
Meisam Rabiei Asskar Janalizadeh Choobbasti 《Geotechnical and Geological Engineering》2016,34(1):75-85
Piled rafts have been widely adopted as an effective foundation for designing high-rise buildings because of their efficiency in controlling the total and differential settlements and improving bearing capacity. In many cases the piled rafts settlements are likely to be large, which leads to an increase of the pile length and/or number of piles required to reduce the settlements. However, this increase does not satisfy the design requirements or an economical design. The majority of piled raft foundations has been designed with a uniform pile length and configuration. This paper describes the process of optimizing the design of a piled raft foundation for a high rise building in the Mazandaran province in Iran by considering an economical design methodology in which piles are placed more densely beneath the maximum load positions when the piled raft is subjected to non-uniform loads. By using the ELPLA software in the analysis process, the validity of the software is examined through the results of a report prepared on behalf of Technical Committee TC18 on piled foundations. The study shows that the pile arrangement method can help to considerably reduce the total and differential settlements with similar total pile length as well as the induced bending moments and shear forces of the raft. This study can help practicing engineers to choose pile and raft parameters with the pile arrangement method to produce an economical design. 相似文献
13.
Considering there is hardly any concerted effort to analyze the pile‐raft foundations under complex loads (combined with vertical loads, horizontal loads and moments), an analysis method is proposed in this paper to estimate the responses of pile‐raft foundations which are subjected to vertical loads, horizontal loads and moments in layered soils based on solutions for stresses and displacements in layered elastic half space. Pile to pile, pile to soil surface, soil surface to pile and soil surface to soil surface interactions are key ingredients for calculating the responses of pile‐raft foundations accurately. Those interactions are fully taken into account to estimate the responses of pile‐raft foundations subject to vertical loads, horizontal loads and moments in layered soils. The constraints of the raft on vertical movements, horizontal movements and rotations of the piles as well as the constraints of the raft on vertical movements and horizontal movements of the soils are considered to reflect the coupled effect on the raft. The method is verified through comparisons with the published methods and FEM. Then, the method is adopted to investigate the influence of soil stratigraphy on pile responses. The study shows that it is necessary to consider the soil non‐homogeneity when estimating the responses of pile‐raft foundations in layered soils, especially when estimating the horizontal responses of pile‐raft foundations. The horizontal loads and the moments have a significant impact on vertical responses of piles in pile‐raft foundations, while vertical loads have little influence on horizontal responses of piles in pile‐raft foundations in the cases of small deformations. The proposed method can provide a simple and useful tool for engineering design. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
14.
In designing piled raft foundations, controlling the total and differential settlements as well as the induced bending moments of the raft is crucial. The majority of piled raft foundations have been designed by placing piles uniformly. In such a design method, the settlements of the piled rafts are likely to be large, which leads to an increase of the pile length and/or number of piles required to reduce the settlements. However, this increase does not satisfy the requirement for economical design. On the basis of a parametric study, this paper contributes a framework for considering an economical design methodology in which piles are placed more densely beneath the column positions when the piled raft is subjected to column loads. The analysis uses PLAXIS 3D software, and the validity of the parametric study is examined through the results of centrifuge model tests conducted by the authors. The study shows that the concentrated pile arrangement method can help to considerably reduce the total and differential settlements as well as the induced bending moments of the raft. Moreover, the effects of parameters, such as pile length, pile number, raft thickness and load types, on the piled raft behavior are investigated. This study can help practicing engineers choose pile and raft parameters in combination with the concentrated pile arrangement method to produce an economical design. 相似文献
15.
A piled raft foundation comprises both piles and a pile cap that itself transmits load directly to the ground. The aim of such a foundation is to reduce the number of piles compared with a more conventional piled foundation where the bearing effect of the pile cap, or raft, is ignored. This paper describes a ‘hybrid’ approach for the analysis of piled raft foundations, based on a load transfer treatment of individual piles, together with elastic interaction between different piles and with the raft. The numerical analysis is used to evaluate a simple approximate method of estimating the overall response of the foundation from the response of the component parts. The method leads to estimates of the overall foundation stiffness, the proportion of load carried by the pile group and the raft, and an initial assessment of differential settlements. Parametric studies are presented showing the effect of factors such as raft stiffness and pile spacing, length and stiffness, and a worked example is included demonstrating the accuracy of the approximate design approach. 相似文献
16.
A simplified method of numerical analysis has been developed to estimate the deformation and load distribution of piled raft foundations subjected to vertical, lateral, and moment loads, using a hybrid model in which the flexible raft is modelled as thin plates and the piles as elastic beams and the soil is treated as springs. Both the vertical and lateral resistances of the piles as well as the raft base are incorporated into the model. Pile–soil–pile, pile–soil–raft and raft–soil–raft interactions are taken into account based on Mindlin's solutions for both vertical and lateral forces. The validity of the proposed method is verified through comparisons with several existing methods for single piles, pile groups and piled rafts. Workable design charts are given for the estimation of the lateral displacement and the load distribution of piled rafts from the stiffnesses of the raft alone and the pile group alone. Additionally, parametric studies were carried out concerning batter pile foundations. It was found that the use of batter piles can efficiently improve the deformation characteristics of pile foundations subjected to lateral loads. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
17.
目前在群桩设计中仍大多数采用均匀等长布桩的方法,这种方法在基础受力、变形等方面存在较大的缺陷。考虑增大群桩轴向刚度和减小群桩基础差异沉降的条件下,将群桩基础位移函数与桩长优化函数相结合,在对基础采取行变换、平面变换的方式下,通过设置不同的桩长比值ξ、连接曲率值η设定不同布桩方案,分析不同方案下群桩基础轴向刚度比、差异沉降比的变化规律;并利用数值模拟法对所得优化结果的可靠性进行验证。此外,针对不同桩土刚度比、不同桩间距对群桩基础的轴向刚度比和差异沉降比进行了参数分析。研究结果表明：不同群桩基础优化变换方式、不同桩长对群桩基础优化结果会产生不同的影响;当优化目的是为增加群桩基础刚度时,应主要考虑行变换的优化方式,当优化目的是为减小基础差异沉降时,应主要考虑平面变换的优化方式;基础轴向刚度比随着桩土刚度比的增加而增大,随着桩间距的减小而增大;基础差异沉降比随着桩土刚度比的增加而减小,随着桩间距的减小而减小。 相似文献