首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
A microstructural analysis was carried out on mylonitic rocks of the Azul megashear zone (AMSZ), Tandilia, which were formed in a range of metamorphic conditions from lower greenschist to amphibolite facies. Tailed porphyroclasts are common and mostly symmetric. Scarce asymmetric rotated porphyroclasts show both sinistral and dextral senses of shear. In sections parallel to the mylonitic foliation, porphyroclasts are round. The AMSZ is probably related to the late Transamazonian orogenic cycle and may be due to NNE–SSW-directed convergence. In weakly deformed protolith and protomylonites, quartz deforms by dynamic recrystallization, mainly subgrain rotation in dislocation creep Regime 2. K-feldspar porphyroclasts and plagioclase show scarce fracturation and deform by dynamic recrystallization along grain boundaries. Quartz microstructures in mylonites indicate predominantly Regime 3 grain boundary migration recrystallization. Feldspar structures indicate recrystallization through the nucleation and growth of new grains at grain boundaries. The temperatures of deformation from mineral assemblages in the CNKFMASH system in four bulk compositions are in the range of 400–450 °C, and the pressures are more than 6 kb.  相似文献   

2.
We use quantitative microstructural analysis including misorientation analysis based on electron backscatter diffraction (EBSD) data to investigate deformation mechanisms of naturally deformed plagioclase in an amphibolite gabbro mylonite. The sample is from lower oceanic crust exposed near the Southwest Indian Ridge, and it has a high ratio of recrystallized matrix grains to porphyroclasts. Microstructures preserved in porphyroclasts suggest that early deformation was achieved principally by dislocation creep with subgrain rotation recrystallization; recrystallized grain (average diameter ∼8 μm) microstructures indicate that subsequent grain boundary sliding (GBS) was active in the continued deformation of the recrystallized matrix. The recrystallized matrix shows four-grain junctions, randomized misorientation axes, and a shift towards higher angles for neighbor-pair misorientations, all indicative of GBS. The matrix grains also exhibit a shape preferred orientation, a weak lattice preferred orientation consistent with slip on multiple slip systems, and intragrain microstructures indicative of dislocation movement. The combination of these microstructures suggest deformation by dislocation-accommodated GBS (DisGBS). Strain localization within the recrystallized matrix was promoted by a transition from grain size insensitive dislocation creep to grain size sensitive GBS, and sustained by the maintenance of a small grain size during superplasticity.  相似文献   

3.
Intragranular microshear zones within a greenschist facies calcite marble were studied to try to constrain better the processes of dynamic recrystallization as well as the deformation processes that occur within newly recrystallized grains. Intragranular recrystallized grains within large, twinned calcite porphyroclasts can be related to the host from which they have recrystallized and are the focus of an electron backscatter diffraction study. Lattice distortions, low angle boundaries and some high angle boundaries (>15°) in the microshears within a porphyroclast have the same misorientation axes suggesting that deformation occurred by climb-accommodated dislocation creep involving subgrain rotation recrystallization. Changes in the ratio of host and twin domain, as the deformation zone is entered, show that twin boundary migration also occurred. Recrystallized grains have similar sizes (10–60 μm) to subgrains, suggesting that they formed by subgrain rotation. However, within the intragranular microshear zones the misorientations between recrystallized grains and porphyroclasts are considerably larger than 15° and misorientation axes are randomly oriented. Moreover recrystallized grain orientations average around the porphyroclast orientation. We suggest that the recrystallized grains, once formed, are able to deform partly by diffusion accommodated grain boundary sliding, which is consistent with predictions made from lab flow laws.  相似文献   

4.
Clinoamphibole from a mylonitic amphibolite exhibits microstructures characteristic of dynamic recrystallization, including porphyroclasts in a finer grained matrix of needle-shaped amphibole. The matrix amphibole defines an LS fabric and porphyroclasts have core and mantle structures with a core containing undulose to patchy extinction and (100) deformation twinning surrounded by a mantle of recrystallized grains. In addition intragranular grains also occur within the cores. TEM analyses of the porphyroclasts reveal that they contain a wide variety of lattice defects including high densities (5 × 108cm–2) of free dislocations and dislocation arrays, dissociated dislocations, stacking faults, and (100) micro-twins. TEM also shows that matrix grains and intragranular grains have relatively low defect densities, and that the intragranular new grains occur at localities in the porphyroclasts characterized by high densities of dislocations. These observations along with the chemical and orientation relationships between the recrystallized grains and porphyroclasts indicate that the new grains may have formed by heterogeneous nucleation and that further growth probably occurred by both strain assisted and chemically induced grain boundary migration or liquid film migration. This recrystallization event is interpreted to be synkinematic based on the fact that no recrystallization textures are present in the matrix grains and that the matrix grains define an LS fabric. However, the low defect densities in the matrix grains and the lack of intracrystalline strain in other phases indicate that post-kinematic recovery processes were active.  相似文献   

5.
The mylonitization of the Pankenushi gabbro in the Hidaka metamorphic belt of central Hokkaido, Japan, occurred along its western margin at ≈600 MPa and 660–700 °C through dynamic recrystallization of plagioclase and a retrograde reaction from granulite facies to amphibolite facies (orthopyroxene + clinopyroxene + plagioclase + H2O = hornblende + quartz). The reaction produced a fine-grained (≤100 μm) polymineralic aggregate composed of orthopyroxene, clinopyroxene, quartz, hornblende, biotite and ilmenite, into which strain is localized. The dynamic recrystallization of plagioclase occurred by grain boundary migration, and produced a monomineralic aggregate of grains whose crystallographic orientations are mostly unrelated to those of porphyroclasts. The monomineralic plagioclase aggregates and the fine-grained polymineralic aggregates are interlayered and define the mylonitic foliation, while the latter is also mixed into the former by grain boundary sliding to form a rather homogeneous polymineralic matrix in ultramylonites. However in both mylonite and ultramylonite, plagioclase aggregates form a stress-supporting framework, and therefore controlled the rock rheology. Crystal plastic deformation of pyroxenes and plagioclase with dominant (100)[001] and (001)1/2 slip systems, respectively, produced distinct shape- and crystallographic-preferred orientations of pyroxene porphyroclasts and dynamically recrystallized plagioclase grains in both mylonite and ultramylonite. Euhedral to subhedral growth of hornblende in pyroxene porphyroclast tails during the reaction and its subsequent rigid rotation in the fine-grained polymineralic aggregate or matrix produced clear shape- and crystallographic-preferred orientations of hornblende grains in both mylonite and ultramylonite. In contrast, the dominant grain boundary sliding of pyroxene and quartz grains in the fine-grained polymineralic aggregate of the mylonite resulted in their very weak shape- and crystallographic-preferred orientations. In the fine-grained polymineralic matrix of the ultramylonite, however, pyroxene and quartz grains became scattered and isolated in the plagioclase aggregate so that they were crystal-plastically deformed leading to stronger shape- and crystallographic-preferred orientations than those seen in the mylonite.  相似文献   

6.
Dynamic recrystallization in the strict sense of the term is the reconstitution of crystalline material without a change in chemical composition, driven by strain energy in the form of dislocations. Driving potentials additional to internal strain energy may contribute to the recrystallization of naturally deformed minerals, which form solid solutions such as feldspar, amphiboles and pyroxenes, if they change their composition during recrystallization. To estimate the relative importance of these driving potentials, the chemical composition of porphyroclasts and recrystallized grains of plagioclase, clinopyroxene and hornblende have been investigated in samples from a high grade shear zone of the Ivrea Zone, Italy. The plagioclases show two different recrystallization microstructures: bulging recrystallization at grain boundaries and discrete zones of recrystallized grains across porphyroclasts probably involving fracturing. Deformation took place under amphibolite facies conditions on a retrograde P,T-path. Porphyroclast and recrystallized compositions from bulging recrystallization microstructures differ only in their Or-content and yield a ΔG between mean host grain and mean recrystallized grain composition at fixed P,T-conditions of approximately 5 Joules/10−4 m3. Extreme compositional variations yield approximately 60 J/10−4 m3. The increase of free energy due to dislocations calculated for common glide systems in plagioclase are on the order of 100 Joules/10−4 m3 for high values of dislocation densities of 1014 m−2. Thus, the effect of chemically induced driving energies on grain boundary velocity appears small for mean compositions but may be as great as that of deformational energies for larger chemical differences. In the other type of microstructure, porphyroclasts and recrystallized grains in discrete zones differ in their anorthite content. The maximum ΔG induced by the compositional disequilibrium is on the order of 100 J/10−4 m3. This maximum value is of the same magnitude as the ΔG derived from high dislocation densities of 1014 m−2. The resulting combined ΔG is approximately twice as high as for deformational ΔG alone, and heterogeneous nucleation may become a feasible recrystallization mechanism which is evident from the microstructures. The recrystallization mechanism depends on the nature of the driving potential. Grain boundary migration (GBM) and heterogeneous nucleation can release Gibbs free energy induced by compositional disequilibrium, whereas this is not likely for subgrain rotation. Therefore, only GBM and heterogeneous nucleation may link metamorphism and deformation, so that syndeformational recrystallization may represent a transitional process ranging from dynamic recrystallization to metamorphic reaction. Received: 8 July 1996 / Accepted: 17 November 1997  相似文献   

7.
Abstract Microstructural and chemical analysis of plagioclase in 20 superficially similar amphibolite facies ductile shear zones in metagabbors and amphibolites of the Ivrea Zone in Italy reveals significant differences in An and Ba contents. Plagioclase, which was deformed at P-T conditions lower than those of the wall rocks, occurs in the following four different microstructural situations with different chemical compositions: (i) relatively undeformed porphyroclasts, (ii) dynamically recrystallized grains and subgrains rimming the porphyroclasts, (iii) infill of microcracks cross-cutting the porphyroclasts and (iv) fine-grained recrystallized grains in the matrix of the shear zones. The differences in the An and Ba contents are caused by partial chemical equilibration of plagioclase in the shear zones during and partly after deformation. Changes in An and Ba contents were caused by fluid-assisted grain-boundary migration recrystallization, as well as by solid-state diffusion, while fluid activity was high. The relation between the composition and microstructures of the plagioclase in the shear zones indicates that in the different shear zones, fluids ceased to be active during different stages in the late shear zone deformation history.
The interpretation of the variations in composition and microstructures reveals that only grains that developed by grain-boundary migration recrystallization and that are not adjacent to porphyroclasts reflect P-T conditions during the dominant shear-zone deformation.  相似文献   

8.
The electron backscattering diffraction technique (EBSD) was used to analyze bulging recrystallization microstructures from naturally and experimentally deformed quartz aggregates, both of which are characterized by porphyroclasts with finely serrated grain boundaries and grain boundary bulges set in a matrix of very fine recrystallized grains. For the Tonale mylonites we investigated, a temperature range of 300–380 °C, 0.25 GPa confining pressure, a flow stress range of ~ 0.1–0.2 GPa, and a strain rate of ~ 10− 13 s− 1 were estimated. Experimental samples of Black Hills quartzite were analyzed, which had been deformed in axial compression at 700 °C, 1.2–1.5 GPa confining pressure, a flow stress of ~ 0.3–0.4 GPa, a strain rate of ~ 10− 6 s− 1, and to 44% to 73% axial shortening. Using orientation imaging we investigated the dynamic recrystallization microstructures and discuss which processes may contribute to their development. Our results suggest that several deformation processes are important for the dismantling of the porphyroclasts and the formation of recrystallized grains. Grain boundary bulges are not only formed by local grain boundary migration, but they also display a lattice misorientation indicative of subgrain rotation. Dynamic recrystallization affects especially the rims of host porphyroclasts with a hard orientation, i.e. with an orientation unsuitable for easy basal slip. In addition, Dauphiné twins within porphyroclasts are preferred sites for recrystallization. We interpret large misorientation angles in the experimental samples, which increase with increasing strain, as formed by the activity of fluid-assisted grain boundary sliding.  相似文献   

9.
Feldspar grain-size reduction occurred due to the fracturing of plagioclase and K-feldspar, myrmekite formation and neocrystallization of albitic plagioclase along shear fractures of K-feldspar porphyroclasts in the leucocratic granitic rocks from the Yecheon shear zone of South Korea that was deformed under a middle greenschist-facies condition. The neocrystallization of albitic plagioclase was induced by strain energy adjacent to the shear fractures and by chemical free energy due to the compositional disequilibrium between infiltrating Na-rich fluid and host K-feldspar. With increasing deformation from protomylonite to mylonite, alternating layers of feldspar, quartz and muscovite developed. The fine-grained feldspar-rich layers were deformed dominantly by granular flow, while quartz ribbons were deformed by dislocation creep. With layer development and a more distributed strain in the mylonite, lower stresses in the quartz-rich layers resulted in a larger size of dynamically recrystallized quartz grains than that of the protomylonite.  相似文献   

10.
A detailed fabric and microstructural analysis of the granitic mylonites was carried out on the southern side of Bes,parmak Mountain north of Selimiye (Milas). The mylonitic augen gneisses have?a blastomylonitic texture characterized by large retort-shape porphyroclasts or augen of feldspars, around which a more ductile, medium to fine-grained matrix of muscovite, biotite, quartz and feldspar is deflected. Feldspars behave in both plastic and brittle fashion, because size reduction occurs through grain boundary migration and/or subgrain rotation, and also through fracturing. Typical “core-and-mantle” structure, characterized by a large feldspar core surrounded by a mantle of fine recrystallized grains, is very characteristic. The majority of plagioclase twins obey the albite-twin law; however, the association with pericline-law twinning suggests that many of the twins are mechanical. Evidence of strain, such as deformation twins, bent or curved twins, undulatory extinction, deformation bands and kink bands occur characteristically in plagioclase. Myrmekite is ubiquitous at K-feldspar grain boundaries, most notably on the long sides of inequant grains parallel to the S-foliation direction, which invariably face the maximum finite shortening direction. Deformation of quartz in mylonitic augen gneisses commonly results in the development of core-and-mantle structure and “type-4” quartz ribbons of elongated, preferably oriented, newly recrystallized quartz aggregates suggesting a primary dynamic recrystallization. Undulatory extinction, deformation bands and lamellae are the strain-related features associated with quartz porphyroclasts. Micas, especially biotite, undergo internal deformation by bend gliding and kinking. Most of the micas are completely attenuated and aligned such that their (001) planes are subparallel or parallel to the margins of quartz ribbons and define the foliation in the rock. These microstructures of feldspars, quartz and mica in the mylonitic augen gneisses in this part of the southern Menderes Massif are broadly consistent with fabric development under upper-greenschist- to lower-amphibolite-facies conditions, rather than almandine–amphibolite facies, as was previously believed. This supports the previous contention of the authors that the protoliths of augen gneisses are younger granitoids and do not represent an exposed Precambrian Pan-African basement in the Menderes Massif.  相似文献   

11.
We report here on a study of three deformed granitoids: two mylonites and an ultramylonite from the inner ductile shear zone of the Ryoke metamorphic belt, SW Japan. Monophase layers composed of quartz, plagioclase or K-feldspar are present in all samples. The plagioclase-rich layers consist of grains 6–10 μm in size, and sometimes include patchy K-feldspar and quartz, indicating solution-precipitation. In the mylonite, the fine-grained plagioclase is mainly An23–25 and, the composition of plagioclase porphyroclast is An21–39 without any significant maximum. The An compositions together with textural observations indicate that fine-grained plagioclase nucleated from solution with mass transfer during deformation. In the ultramylonite, fine-grained plagioclase is widely changed to be An15–37, indicating that the grain-size-reduction process includes fracturing of original plagioclase porphyroclasts in addition to the solution–precipitation process, which results in the composition concentrated around An30. In all samples, the crystallographic orientations of fine-grained plagioclases are almost random and do not correlate with neighbouring porphyroclasts. Grain-size-sensitive creep occurred during rock deformation subsequent to the process of solution–precipitation that involved mass transfer via fluids.  相似文献   

12.
 Plagioclase recrystallization microstructures and petrofabrics in the unmetamorphosed, 1.43 Ga Poe Mountain anorthosite, Wyoming, are indicative of very high-temperature deformation and recrystallization during the emplacement of the anorthosite body. The Poe Mountain anorthosite consists of a core of recrystallized, massive anorthosite transitional with a series of layered anorthositic cumulates at the margin of the intrusion. Irregular grain boundaries and dissected grain microstructures in the massive core and transitional anorthosites suggest that the anorthositic rocks recrystallized by “fast” grain boundary migration and possibly subgrain rotation recrystallization, at very high temperatures (≈1050°C) during emplacement of the intrusion in the mid-crust (3 kbar). The deformation and recrystallization of the Poe Mountain anorthosite was continuous from subliquidus to subsolidus temperature conditions during the emplacement of the intrusion. Anorthosites with the lowest modal percentages of ferromagnesian minerals and Fe-Ti oxides are always the most recrystallized. This suggests that melt interstitial to the plagioclase-crystal framework was removed during deformation and recrystallization of the intrusion. Bulging of plagioclase grain boundaries around Fe-Ti oxides together with deformed oikocrystic ferromagnesian minerals and plagioclase chadacrysts indicate that the deformation and recrystallization of the intrusion continued after the crystallization of the interstitial melt minerals. Received: 28 February 1995/Accepted: 20 July 1995  相似文献   

13.
Partial syntectonic recrystallization has been produced in an experimentally deformed plagioclase (peristerite An4.5). The recrystallized grains are scattered through the strongly deformed matrix and appear to have developed by a nucleation and growth mechanism.  相似文献   

14.
Naturally deformed feldspars from foliated granites in a shear zone in Newfoundland exhibit transitional brittle-ductile behaviour. Brittle failure is subordinate to dynamic recrystallization, microcracking, strain enhanced diffusion and reaction enhanced ductility during the deformation. Both plagioclase (An28) and K-feldspar are transformed to albite with increasing strain. Interaction of metamorphic and structural processes at the grain scale is emphasised. This is illustrated with examples of quartz-filled veins (segregation bands) in plagioclase and recrystallized polycrystalline aggregates in plagioclase and K-feldspar. The role of microcracking in plagioclase and of pre-existing internal growth structures in the formation of initially coarse grained recrystallized aggregates from large single crystals is suggested.  相似文献   

15.
Dolomite aggregates deformed by dislocation creep over a wide range of conditions (T = 700–1000 °C, effective pressure of 900 MPa, strain rates of 10−7 – 10−4/s) strain weaken by up to 75% of the peak differential stress. Microstructural study of samples shortened to different finite strains beyond the peak differential stress shows that strain becomes highly localized within shear zones by high-temperature creep processes, with no contribution of brittle cracking. At low strains (8%), dolomite deforms homogeneously by recrystallization-accommodated dislocation creep. At progressively higher sample strains, deformation is localized into narrow shear zones made up of very fine (∼3 μm) recrystallized grains and relict porphyroclasts (20–100 μm). Finely-recrystallized dolomite grains in the shear zones are largely dislocation free and localized shear is facilitated by diffusion creep. In contrast, original dolomite grains and porphyroclasts in shear zones have high dislocation densities and do not deform after shear zone formation. Calculated strain rates in the shear zones are two to three orders of magnitude faster than the imposed bulk strain rate of the samples and these strain rates are consistent with predictions of the diffusion creep flow law for fine-grained dolomite.  相似文献   

16.
Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.  相似文献   

17.
A microstructural and metamorphic study of a naturally deformed medium‐ to high‐pressure granitic orthogneiss (Orlica–?nie?nik dome, Bohemian Massif) provides evidence of behaviour of the felsic crust during progressive burial along a subduction‐type apparent thermal gradient (～10 °C km?1). The granitic orthogneisses develops three distinct microstructural types, as follows: type I – augen orthogneiss, type II – banded orthogneiss and type III – mylonitic orthogneiss, each representing an evolutionary stage of a progressively deformed granite. Type I orthogneiss is composed of partially recrystallized K‐feldspar porphyroclasts surrounded by wide fronts of myrmekite, fully recrystallized quartz aggregates and interconnected monomineralic layers of recrystallized plagioclase. Compositional layering in the type II orthogneiss is defined by plagioclase‐ and K‐feldspar‐rich layers, both of which show an increasing proportion of interstitial minerals, as well as the deformation of recrystallized myrmekite fronts. Type III orthogneiss shows relicts of quartz and K‐feldspar ribbons preserved in a fine‐grained polymineralic matrix. All three types have the same assemblage (quartz + plagioclase + K‐feldspar + muscovite + biotite + garnet + sphene ± ilmenite), but show systematic variations in the composition of muscovite and garnet from types I to III. This is consistent with the equilibration of the three types at different positions along a prograde P?T path ranging from <15 kbar and <700 °C (type I orthogneiss) to 19–20 kbar and >700 °C (types II and III orthogneisses). The deformation types thus do not represent evolutionary stages of a highly partitioned deformation at constant P?T conditions, but reflect progressive formation during the burial of the continental crust. The microstructures of the type I and type II orthogneisses result from the dislocation creep of quartz and K‐feldspar whereas a grain boundary sliding‐dominated diffusion creep regime is the characteristic of the type III orthogneiss. Strain weakening related to the transition from type I to type II microstructures was enhanced by the recrystallization of wide myrmekite fronts, and plagioclase and quartz, and further weakening and strain localization in type III orthogneiss occurred via grain boundary sliding‐enhanced diffusion creep. The potential role of incipient melting in strain localization is discussed.  相似文献   

18.
The rate of compositional and isotopic exchange between minerals may be enhanced significantly if the rock is deformed simultaneously. The enhanced exchange rate may result from a reduction in grain size (shorter distance for volume diffusion), dissolution and growth of grains by diffusion creep (pressure solution), or the movement of high-angle grain boundaries through strained grains during recrystallization in the dislocation creep regime. The migration of high-angle grain boundaries provides high diffusivity paths for the rapid exchange of components during recrystallization. The operation of the latter process has been demonstrated by deforming aggregates consisting of two plagioclases (An1 and An79) at 900°C, 1 GPa confining pressure, and a strain rate of ∼2x10-6s-1. The polygonal, recrystallized grains were analyzed using an analytical transmission electron microscope and have a variable but often intermediate composition. At the conditions of these experiments, the volume interdiffusion rate of NaSi/CaAl is too slow to produce any observable chemical change, and microstructural-chemical relations indicate that the contribution from diffusion creep was insignificant except for initially fine-grained (2–10 μm) aggregates. These results indicate that strain-induced recrystallization can be an effective mechanism for enhancing the kinetics of metamorphic reactions and for resetting the isotope systematics of minerals such as feldspars, pyroxenes, and amphiboles.  相似文献   

19.
ABSTRACT In the Woodroffe Thrust mylonite zone, central Australia, recrystallization in plagioclase and K-feldspar involved subgrain rotation, assisted by grain-boundary or kink band boundary bulging, without contribution from a change in the chemical composition from host grains to new grains. The size of subgrains and new grains changes across the mylonite zone, apparently as a function of the strain rate and the H2O content of the rock. The partitioning of deformation into zones of progressive shearing and progressive shortening controls the sites of recovery and recrystallization in feldspar during mylonitization. The size of feldspar porphyroclasts in well developed mylonites is governed by the scale of deformation partitioning reached in the earlier stages of mylonitization, before the formation of a large proportion of fine-grained matrix that can accommodate the progressive shearing component of the deformation. Recrystallization occurs in microcline, apparently without involving a translation to a monoclinic structure, as microcline-twinned new grains are common adjacent to microcline-twinned host grains. K-feldspar triclinicity values calculated from XRD traces increase from the margins to the interior of the mylonite zone, in conjunction with deformation intensity. K-feldspar host grains locally have cores of orthoclase or untwinned microcline, surrounded by mantles of twinned microcline, suggesting a relationship between the presence of microcline twinning and the degree of K-feldspar triclinicity.  相似文献   

20.
In the Schirmacher Hills, most of the ductile shearing took place under high to medium grade amphibolite facies metamorphism. The microstructure of the mylonites shows characteristic features of high temperature deformation and thus gives us an idea of deformation mechanisms of the constituent minerals at great crustal depth. The variation in microstructure of the sheared rock is partly due to heterogeneity of the intensity of strain from domain to domain, producing protomylonites, orthomylonites and ultramylonites. However, a large part of the microstructural variation has resulted from syn- to post-tectonic recrystallization and grain growth of constituent minerals. Both quartz and feldspar have deformed by crystal plastic processes with dominant grain boundary migration. The present aspect ratio of the feldspar grains is a result of various degrees of dynamic recrystallization along the grain boundary. The ratio varies between 1.5 and 2. Presence of exsolution lamellae in perthites and formation of myrmekite at the strained grains of K-feldspar suggest diffusion assisted dislocation creep. These mylonites are characterized by the presence of weakly strained or unstrained long quartz ribbons. The development of quartz ribbons with the absence of significant strain suggests grain recovery and grain growth during high temperature mylonitization. The growth of quartz ribbons took place by coalescing neighbouring grains both along and across the ribbon length. At the ultramylonite stage the fine-grained matrix of quartz and feldspar mostly accommodates the bulk strain.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号