首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Recrystallization of perthites in granulite facies (T = 700–730 °C, P = 0.65–0.8 GPa) shear zones in mangerite-charnockite rocks from Lofoten (Norway) is localized along intracrystalline bands parallel to fractures. Fracturing preferentially occurred along the cleavage planes (010) and (001). EBSD analysis of perthite porphyroclasts indicates a very low degree of internal misorientation (within 5°) and the lack of recovery features. Recrystallized grains show coarsening with increasing width of the bands, and chemical changes with respect to the host grains. Crystallographic orientation of the new grains does not show a host-control relation to the parent perthite grains. In summary, the microstructure and CPO data consistently indicate intragranular recrystallization by nucleation and growth from fractured grains. Perthite porphyroclasts are surrounded by a matrix of recrystallized plagioclase + K-feldspar ± amphibole ± biotite. There is extensive evidence of syndeformational nucleation of new phases and of phase boundary migration in the matrix, with plagioclase grains forming bulges and protrusions towards K-feldspar. The spatial distribution of K-feldspar and plagioclase in the recrystallized matrix is characterized by the predominance of phase boundaries over grain boundaries. All these observations are consistent with diffusion creep as the dominant deformation mechanism in the matrix, associated with grain boundary sliding. Accordingly, recrystallized plagioclase and K-feldspar show a very weak crystallographic preferred orientation, which is interpreted in terms of oriented growth during diffusion creep. Fracturing of perthites promoted extensive grain size reduction, recrystallization, fluid infiltration, and operation of grain-size sensitive creep, resulting in strain localization.  相似文献   

2.
It is often observed that dynamic recrystallization results in a recrystallized grain size distribution with a mean grain size that is inversely related to the flow stress. However, it is still open to discussion if theoretical models that underpin recrystallized grain size–stress relations offer a satisfactorily microphysical basis. The temperature dependence of recrystallized grain size, predicted by most of these models, is rarely observed, possibly because it is usually not systematically investigated. In this study, samples of wet halite containing >10 ppm water (by weight) were deformed in axial compression at 50 MPa confining pressure. The evolution of the recrystallized grain size distribution with strain was investigated using experiments achieving natural strains of 0.07, 0.12 and 0.25 at a strain rate of 5×10−7 s−1 and a temperature of 125 °C. The stress and temperature dependence of recrystallized grain size was systematically investigated using experiments achieving fixed strains of 0.29–0.46 (and one to a strain of 0.68) at constant strain rates of 5×10−7–1×10−4 s−1 and temperatures of 75–240 °C, yielding stresses of 7–22 MPa. The microstructures and full grain size distributions of all samples were analyzed. The results showed that deformation occurred by a combination of dislocation creep and solution-precipitation creep. Dynamic recrystallization occurred in all samples and was dominated by fluid assisted grain boundary migration. During deformation, grain boundary migration results in a competition between grain growth due to the removal of grains with high internal strain energy and grain size reduction due to grain dissection (i.e. moving boundaries that crosscut or consume parts of neighbouring grains). At steady state, grain growth and grain size reduction processes balance, yielding constant flow stress and recrystallized grain size that is inversely related to stress and temperature. Evaluation of the recrystallized grain size data against the different models for the development of mean steady state recrystallized grain size revealed that the data are best described by a model based on the hypothesis that recrystallized grain size organizes itself in the boundary between the (grain size sensitive) solution-precipitation and (grain size insensitive) dislocation creep fields. Application of a piezometer, calibrated using the recrystallized grain size data, to natural halite rock revealed that paleostresses can vary significantly with temperature (up to a factor of 2.5 for T=50–200 °C) and that the existing temperature independent recrystallized grain size–stress piezometer may significantly underestimate flow stresses in natural halite rock.  相似文献   

3.
We use quantitative microstructural analysis including misorientation analysis based on electron backscatter diffraction (EBSD) data to investigate deformation mechanisms of naturally deformed plagioclase in an amphibolite gabbro mylonite. The sample is from lower oceanic crust exposed near the Southwest Indian Ridge, and it has a high ratio of recrystallized matrix grains to porphyroclasts. Microstructures preserved in porphyroclasts suggest that early deformation was achieved principally by dislocation creep with subgrain rotation recrystallization; recrystallized grain (average diameter ∼8 μm) microstructures indicate that subsequent grain boundary sliding (GBS) was active in the continued deformation of the recrystallized matrix. The recrystallized matrix shows four-grain junctions, randomized misorientation axes, and a shift towards higher angles for neighbor-pair misorientations, all indicative of GBS. The matrix grains also exhibit a shape preferred orientation, a weak lattice preferred orientation consistent with slip on multiple slip systems, and intragrain microstructures indicative of dislocation movement. The combination of these microstructures suggest deformation by dislocation-accommodated GBS (DisGBS). Strain localization within the recrystallized matrix was promoted by a transition from grain size insensitive dislocation creep to grain size sensitive GBS, and sustained by the maintenance of a small grain size during superplasticity.  相似文献   

4.
Intragranular microshear zones within a greenschist facies calcite marble were studied to try to constrain better the processes of dynamic recrystallization as well as the deformation processes that occur within newly recrystallized grains. Intragranular recrystallized grains within large, twinned calcite porphyroclasts can be related to the host from which they have recrystallized and are the focus of an electron backscatter diffraction study. Lattice distortions, low angle boundaries and some high angle boundaries (>15°) in the microshears within a porphyroclast have the same misorientation axes suggesting that deformation occurred by climb-accommodated dislocation creep involving subgrain rotation recrystallization. Changes in the ratio of host and twin domain, as the deformation zone is entered, show that twin boundary migration also occurred. Recrystallized grains have similar sizes (10–60 μm) to subgrains, suggesting that they formed by subgrain rotation. However, within the intragranular microshear zones the misorientations between recrystallized grains and porphyroclasts are considerably larger than 15° and misorientation axes are randomly oriented. Moreover recrystallized grain orientations average around the porphyroclast orientation. We suggest that the recrystallized grains, once formed, are able to deform partly by diffusion accommodated grain boundary sliding, which is consistent with predictions made from lab flow laws.  相似文献   

5.
Clinoamphibole from a mylonitic amphibolite exhibits microstructures characteristic of dynamic recrystallization, including porphyroclasts in a finer grained matrix of needle-shaped amphibole. The matrix amphibole defines an LS fabric and porphyroclasts have core and mantle structures with a core containing undulose to patchy extinction and (100) deformation twinning surrounded by a mantle of recrystallized grains. In addition intragranular grains also occur within the cores. TEM analyses of the porphyroclasts reveal that they contain a wide variety of lattice defects including high densities (5 × 108cm–2) of free dislocations and dislocation arrays, dissociated dislocations, stacking faults, and (100) micro-twins. TEM also shows that matrix grains and intragranular grains have relatively low defect densities, and that the intragranular new grains occur at localities in the porphyroclasts characterized by high densities of dislocations. These observations along with the chemical and orientation relationships between the recrystallized grains and porphyroclasts indicate that the new grains may have formed by heterogeneous nucleation and that further growth probably occurred by both strain assisted and chemically induced grain boundary migration or liquid film migration. This recrystallization event is interpreted to be synkinematic based on the fact that no recrystallization textures are present in the matrix grains and that the matrix grains define an LS fabric. However, the low defect densities in the matrix grains and the lack of intracrystalline strain in other phases indicate that post-kinematic recovery processes were active.  相似文献   

6.
The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10−6/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.  相似文献   

7.
A comparison was made of shallow water sediments from the Lagoon of Venice (LV) and the Lagoon of Cabras (LC), comparing depositional environments and exploring the relationships between hydrodynamics and sedimentological parameters. The two water bodies are very different in size (LV: 360 km2; LC: 22 km2), and the sediments predominantly consist of silty-clay (LV: Mz ≈ 26 μm; LC: Mz ≈ 6 μm). However, there are large differences between the two lagoons with respect to sand (LV: mean 19%; LC: mean ~ 3%) and clay (LV: mean 20%; LC: mean 45%) contents. The Lagoon of Venice (mean depth ~ 1 m) can be considered a tidal basin, whereas the Lagoon of Cabras (mean depth ~ 2 m) has the character of a coastal lake in which wind is the main hydrodynamic forcing factor. A comparison of sediment grain-size distributions with water circulation patterns in different parts of the lagoons highlighted some interesting differences. Grain-size analyses of samples reveal a deficiency of particles around 8 μm in the LC, which is interpreted as reflecting the transition between cohesive flocs/aggregates and non-cohesive coarser silt particles, while the transition limit in the LV is ~ 20 μm. Thus, particles are cohesive below 8 μm in the LC and below ~ 20 μm in the LV. This is probably because of the differences in the clay/silt ratio, which is much lower in the LV (~ 0.3) than in LC (~ 1), conferring a “silt-dominated network structure” on most of the LV sediments.The hydrographical data used were root mean square velocity (RMSV) and water residence time (WRT), computed under the main forcing conditions. The results show a general correlation between RMSV and sortable silt in the LC, and between RMSV and coarser sediments (63–105 μm) in the LV. Some significant differences between the lagoons were detected in the degree of correlation between WRT and grain size. Root mean square velocity (~ 7 cm s− 1 in the LV and ~ 3 cm s− 1 in the LC) was a greater forcing factor in the LC than in the LV. Conversely, WRT, which is on average ~ 16 days in the LV and ~ 19 days in the LC, has more influence in the LV. This study highlights the usefulness of comparing environments with different hydrodynamic energies, e.g., tidal and/or wind-driven currents, to elucidate and thereby improve our understanding of the processes governing the spatial distribution of sedimentological features, the transport mechanisms of sediments, and the relationship between them. The results demonstrate that the approach outlined in this study has the potential to provide a universal hydro-sedimentological classification scheme.  相似文献   

8.
The relative nucleus density (RND) model of dynamically recrystallized grain size [Sakai, T., Jonas, J.J. 1984. Dynamic recrystallization: mechanical and microctructutal consideration. Acta metallurgica, 32, 198–209] was applied to experimentally and to naturally deformed marbles that have undergone dynamic recrystallization. The model shows that a relationship between initial grain size (D0) and stable dynamically recrystallized grain size (DS) for a given value of temperature-corrected strain-rate (Z) controls grain size evolution during dynamic recrystallization. New microstructural mechanism maps (MM-maps) for experimentally and naturally deformed marbles (based on previously published data) were defined in log grain size–log Z space and show two distinct regions of grain reduction and grain coarsening. The boundary between these two regions corresponds to an equation relating dynamically recrystallized grain size and temperature corrected strain rate, as proposed in this work. The new MM-map was used to trace semi-quantitatively microstructural and grain size evolution in naturally deformed marbles that underwent dynamic recrystallization at different thermal conditions. The boundary between grain coarsening and grain reduction does not necessarily coincide with the boundary between rotation and migration recrystallization mechanisms. Assessment of available natural data shows that the boundary condition D0 = 2DS between grain-coarsening and grain-reduction introduced by Sakai and Jonas [Sakai, T., Jonas, J.J. 1984. Dynamic recrystallization: mechanical and microctructutal consideration. Acta metallurgica, 32, 198–209] is not required for naturally deformed marble.  相似文献   

9.
Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.  相似文献   

10.
Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10− 4 s− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.  相似文献   

11.
Deformation experiments have been carried out to investigate the effect of dynamic recrystallisation on crystallographic preferred orientation (CPO) development. Cylindrical samples of natural single crystals of quartz were axially deformed together with 1 vol.% of added water and 20 mg of Mn2O3 powder in a Griggs solid medium deformation apparatus in different crystallographic orientations with compression direction: (i) parallel to <c>, (ii) at 45° to <c> and 45° to <a> and (iii) parallel to <a>. The experiments were performed at a temperature of 800 °C, a confining pressure of 1.2 GPa, a strain rate of  10− 6 s− 1, to bulk finite strains of  14–36%. The deformed samples were analysed in detail using optical microscopy, electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Two different microstructural domains were distinguished in the deformed samples: (i) domains with undulatory extinction and deformation lamellae, and (ii) domains with new recrystallised grains. Within the domains of undulatory extinction, crystal-plastic deformation caused gradual rotations of the crystal lattice up to  30° away from the host orientation. New recrystallised grains show a strong CPO with c-axis maxima at  45° to the compression direction. This is the case in all experiments, irrespective of the initial crystallographic orientation. The results show that c-axes are not continuously rotated towards the new maxima. The new grains thus developed through a mechanism different from subgrain rotation recrystallisation. New grains have a subeuhedral shape and numerous microcavities, voids, fluid channels and fluid inclusions at their grain boundaries. No host control is recorded in misorientation axes across their large angle grain boundaries. New grains might have been created by nucleation from solution in the μm-scale voids and microfractures. The CPO most likely developed due to preferred growth of the freshly precipitated grains with orientations suitable for intracrystalline deformation at the imposed experimental conditions.  相似文献   

12.
Aggregates composed of olivine and magnesiowüstite have been deformed to large strains at high pressure and temperature to investigate stress and strain partitioning, phase segregation and possible localization of deformation in a polyphase material. Samples with 20 vol.% of natural olivine and 80 vol.% of (Mg0.7Fe0.3)O were synthesized and deformed in a gas-medium torsion apparatus at temperatures of 1127 °C and 1250 °C, a confining pressure of 300 MPa and constant angular displacement rates equivalent to constant shear strain rates of 1–3.3 × 10− 4 s− 1. The samples deformed homogeneously to total shear strains of up to γ  15. During constant strain rate measurements the flow stress remained approximately stable at 1250 °C while it progressively decreased after the initial yield stress at the lower temperature. Mechanical data, microstructures and textures indicate that both phases were deforming in the dislocation creep regime. The weaker component, magnesiowüstite, controlled the rheological behavior of the bulk material and accommodated most of the strain. Deformation and dynamic recrystallization lead to grain refinement and to textures that were not previously observed in pure magnesiowüstite and may have developed due to the presence of the second phase. At 1127 °C, olivine grains behaved as semi-rigid inclusions rotating in a viscous matrix. At 1250 °C, some olivine grains remained largely undeformed while deformation and recrystallization of other grains oriented for a-slip on (010) resulted in a weak foliation and a texture typical for pure dry olivine aggregates. Both a-slip and c-slip on (010) were activated in olivine even though the nominal stresses were up to 2 orders of magnitude lower than those needed to activate these slip systems in pure olivine at the same conditions.  相似文献   

13.
Mylonitization of medium-grade marbles in the Bancroft shear zone, Ontario, Canada, is characterized by decreasing grain-size of both calcite and graphite, and a variety of textures. Calcite grain-sizes vary from several millimeters in the protolith, to 50–200 μm in mylonite, to <30 μm in ultramylonite. Corresponding calcite grain shapes are equant in the protolith, elongate in protomylonite (first-developed dimensional preferred orientation), equant in coarse mylonite, elongate in fine mylonite (second-developed dimensional preferred orientation) and generally equant in ultramylonite, which suggests that external energy (applied stress) that tends to elongate grains competed with internal energy sources (e.g. distortional strain) that favor equant shapes. Graphite grain-size changes from several millimeters to centimeters in the protolith to submicroscopic in ultramylonite. In the mylonitic stages, graphite is present as dark bands, while in the ultramylonitic stage it is preserved as a fine coating on calcite grains.Based on textural evidence, twinning (exponential creep; regime I), dynamic recrystallization (power law creep; regime II) and possibly grain boundary sliding superplasticity (regime III) are considered the dominant deformation mechanisms with increasing intensity of mylonitization; their activity is largely controlled by calcite grain-size. Calcite grain-size reduction occurred predominantly by the process of rotation recrystallization during the early stages of mylonitization, as indicated by the occurrence of core and mantle or mortar structures, and by the grain-size of subgrains and recrystallized grains. Grain elongation in S-C structures indicates the activity of migration recrystallization; these structures are not the result of flattening of originally equant grains. Differential stress estimates in coarse mylonites and ultramylonites, based on recrystallized grain-size, are 2–5 and 14–38 MPa, respectively. Initial grain-size reduction of graphite occurred by progressive separation along basal planes, analogous to mica fish formation in quartzo-feldspathic mylonites.Calcite-graphite thermometry on mylonitic and ultramylonitic samples shows that the metamorphic conditions during mylonitization were 475 ± 50°C, which, combined with a differential stress value of 26 MPa, gives a strain rate of 1.2 x 10−10s−1 based on constitutive equations; corresponding displacement rates are <38 mmyr−1.  相似文献   

14.
A microstructural analysis was carried out on mylonitic rocks of the Azul megashear zone (AMSZ), Tandilia, which were formed in a range of metamorphic conditions from lower greenschist to amphibolite facies. Tailed porphyroclasts are common and mostly symmetric. Scarce asymmetric rotated porphyroclasts show both sinistral and dextral senses of shear. In sections parallel to the mylonitic foliation, porphyroclasts are round. The AMSZ is probably related to the late Transamazonian orogenic cycle and may be due to NNE–SSW-directed convergence. In weakly deformed protolith and protomylonites, quartz deforms by dynamic recrystallization, mainly subgrain rotation in dislocation creep Regime 2. K-feldspar porphyroclasts and plagioclase show scarce fracturation and deform by dynamic recrystallization along grain boundaries. Quartz microstructures in mylonites indicate predominantly Regime 3 grain boundary migration recrystallization. Feldspar structures indicate recrystallization through the nucleation and growth of new grains at grain boundaries. The temperatures of deformation from mineral assemblages in the CNKFMASH system in four bulk compositions are in the range of 400–450 °C, and the pressures are more than 6 kb.  相似文献   

15.
The mylonitization of the Pankenushi gabbro in the Hidaka metamorphic belt of central Hokkaido, Japan, occurred along its western margin at ≈600 MPa and 660–700 °C through dynamic recrystallization of plagioclase and a retrograde reaction from granulite facies to amphibolite facies (orthopyroxene + clinopyroxene + plagioclase + H2O = hornblende + quartz). The reaction produced a fine-grained (≤100 μm) polymineralic aggregate composed of orthopyroxene, clinopyroxene, quartz, hornblende, biotite and ilmenite, into which strain is localized. The dynamic recrystallization of plagioclase occurred by grain boundary migration, and produced a monomineralic aggregate of grains whose crystallographic orientations are mostly unrelated to those of porphyroclasts. The monomineralic plagioclase aggregates and the fine-grained polymineralic aggregates are interlayered and define the mylonitic foliation, while the latter is also mixed into the former by grain boundary sliding to form a rather homogeneous polymineralic matrix in ultramylonites. However in both mylonite and ultramylonite, plagioclase aggregates form a stress-supporting framework, and therefore controlled the rock rheology. Crystal plastic deformation of pyroxenes and plagioclase with dominant (100)[001] and (001)1/2 slip systems, respectively, produced distinct shape- and crystallographic-preferred orientations of pyroxene porphyroclasts and dynamically recrystallized plagioclase grains in both mylonite and ultramylonite. Euhedral to subhedral growth of hornblende in pyroxene porphyroclast tails during the reaction and its subsequent rigid rotation in the fine-grained polymineralic aggregate or matrix produced clear shape- and crystallographic-preferred orientations of hornblende grains in both mylonite and ultramylonite. In contrast, the dominant grain boundary sliding of pyroxene and quartz grains in the fine-grained polymineralic aggregate of the mylonite resulted in their very weak shape- and crystallographic-preferred orientations. In the fine-grained polymineralic matrix of the ultramylonite, however, pyroxene and quartz grains became scattered and isolated in the plagioclase aggregate so that they were crystal-plastically deformed leading to stronger shape- and crystallographic-preferred orientations than those seen in the mylonite.  相似文献   

16.
This paper studies the flow heterogeneity around porphyroclasts associated with greenschist facies deformation of a calcite marble shear zone. Microstructural data from electron backscatter diffraction analyses (EBSD) are used to constrain the flow mechanics of this dominantly non-coaxial type of deformation. The microstructure of the undisturbed ultramylonite (grain-size range 5–100 μm, mean 40 μm) is interpreted to represent steady-state (time-independent) flow conditions with flow planes parallel to the shear zone boundary. Single calcite porphyroclasts (grain-size 1–3 mm) caused flow perturbation in the fine-grained marble ultramylonite. It is the shape, in particular, of these rigid porphyroclasts that controls their rotational behaviour during deformation and, therefore, the development of specific flow fabrics. The flow planes around elongated-rhomboidal, stable porphyroclasts change the orientation to become roughly parallel to the porphyroclast margin, whereas the geometry of flow planes around nearly equant, rotating porphyroclasts describes a δ-type flow pattern. We infer that to some extent decoupling at the clast–matrix interface has occurred to guarantee a stable orientation of elongated porphyroclasts, but was not sufficient to reduce the rotation rate of equant clasts to zero. According to the flow deflection, the general crystallographic preferred orientation (CPO) with its single c-axis maximum perpendicular to the flow plane is rotated about an axis which is (sub)parallel to the kinematic rotation axis of the shear zone. Ultramylonite microstructures, CPOs and misorientation data are best explained by the dual operation of grain-size-insensitive (dislocation creep with recovery and recrystallization) and grain-size-sensitive (diffusion creep) mechanisms. The limited grain-size reduction around porphyroclasts suggests that the grain-size-insensitive mechanisms controlled rheology.  相似文献   

17.
The effect of Dauphiné twinning on plastic strain in quartz   总被引：1，自引：0，他引：1  
We present an electron backscatter diffraction analysis of five quartz porphyroclasts in a greenschist facies (T = 300–400°C) granitoid protomylonite from the Arolla unit of the NW Alps. Mechanical Dauphiné twinning developed pervasively during the incipient stage of deformation within two porphyroclasts oriented with a negative rhomb plane {z} almost orthogonal to the compression direction (z-twin orientation). Twinning was driven by the anisotropy in the elastic compliance of quartz and resulted in the alignment of the poles of the planes of the more compliant positive rhomb {r} nearly parallel to the compression direction (r-twin orientation). In contrast, we report the lack of twinning in two porphyroclasts already oriented with one of the {r} planes orthogonal to the compression direction. One twinned porphyroclast has been investigated with more detail. It shows the localization of much of the plastic strain into discrete r-twins as a consequence of the higher amount of elastic strain energy stored by r-twins in comparison to z-twins. The presence of Dauphiné twins induced a switch in the dominant active slip systems during plastic deformation, from basal <a> (regions without twinning) to {π} and {π′} <a> (pervasively twinned regions). Dynamic recrystallization is localized along an r-twin and occurred dominantly by progressive subgrain rotation, with a local component of bulging recrystallization. Part of the recrystallized grains underwent rigid-body rotation, approximately about the bulk vorticity axis, which accounts for the development of large misorientation angles. The recrystallized grain size piezometer for quartz yields differential stress of 100 MPa. The comparison of this palaeostress estimate with literature data suggests that mechanical Dauphiné twinning could have a potential use as palaeopiezometer in quartz-bearing rocks.  相似文献   

18.
Grain size and grain shape analysis of fault rocks   总被引：4，自引：0，他引：4  
  相似文献   

19.
Dynamic recrystallization in the strict sense of the term is the reconstitution of crystalline material without a change in chemical composition, driven by strain energy in the form of dislocations. Driving potentials additional to internal strain energy may contribute to the recrystallization of naturally deformed minerals, which form solid solutions such as feldspar, amphiboles and pyroxenes, if they change their composition during recrystallization. To estimate the relative importance of these driving potentials, the chemical composition of porphyroclasts and recrystallized grains of plagioclase, clinopyroxene and hornblende have been investigated in samples from a high grade shear zone of the Ivrea Zone, Italy. The plagioclases show two different recrystallization microstructures: bulging recrystallization at grain boundaries and discrete zones of recrystallized grains across porphyroclasts probably involving fracturing. Deformation took place under amphibolite facies conditions on a retrograde P,T-path. Porphyroclast and recrystallized compositions from bulging recrystallization microstructures differ only in their Or-content and yield a ΔG between mean host grain and mean recrystallized grain composition at fixed P,T-conditions of approximately 5 Joules/10−4 m3. Extreme compositional variations yield approximately 60 J/10−4 m3. The increase of free energy due to dislocations calculated for common glide systems in plagioclase are on the order of 100 Joules/10−4 m3 for high values of dislocation densities of 1014 m−2. Thus, the effect of chemically induced driving energies on grain boundary velocity appears small for mean compositions but may be as great as that of deformational energies for larger chemical differences. In the other type of microstructure, porphyroclasts and recrystallized grains in discrete zones differ in their anorthite content. The maximum ΔG induced by the compositional disequilibrium is on the order of 100 J/10−4 m3. This maximum value is of the same magnitude as the ΔG derived from high dislocation densities of 1014 m−2. The resulting combined ΔG is approximately twice as high as for deformational ΔG alone, and heterogeneous nucleation may become a feasible recrystallization mechanism which is evident from the microstructures. The recrystallization mechanism depends on the nature of the driving potential. Grain boundary migration (GBM) and heterogeneous nucleation can release Gibbs free energy induced by compositional disequilibrium, whereas this is not likely for subgrain rotation. Therefore, only GBM and heterogeneous nucleation may link metamorphism and deformation, so that syndeformational recrystallization may represent a transitional process ranging from dynamic recrystallization to metamorphic reaction. Received: 8 July 1996 / Accepted: 17 November 1997  相似文献   

20.
Three samples of gem quality plagioclase crystals of An60 were experimentally deformed at 900 °C, 1 GPa confining pressure and strain rates of 7.5–8.7×10−7 s−1. The starting material is effectively dislocation-free so that all observed defects were introduced during the experiments. Two samples were shortened normal to one of the principal slip planes (010), corresponding to a “hard” orientation, and one sample was deformed with a Schmid factor of 0.45 for the principal slip system [001](010), corresponding to a “soft” orientation. Several slip systems were activated in the “soft” sample: dislocations of the [001](010) and 110(001) system are about equally abundant, whereas 110{111} and [101] in ( 31) to ( 42) are less common. In the “soft” sample plastic deformation is pervasive and deformation bands are abundant. In the “hard” samples the plastic deformation is concentrated in rims along the sample boundaries. Deformation bands and shear fractures are common. Twinning occurs in close association with fracturing, and the processes are clearly interrelated. Glissile dislocations of all observed slip systems are associated with fractures and deformation bands indicating that deformation bands and fractures are important sites of dislocation generation. Grain boundaries of tiny, defect-free grains in healed fracture zones have migrated subsequent to fracturing. These grains represent former fragments of the fracture process and may act as nuclei for new grains during dynamic recrystallization. Nucleation via small fragments can explain a non-host-controlled orientation of recrystallized grains in plagioclase and possibly in other silicate materials which have been plastically deformed near the semi-brittle to plastic transition.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号