共查询到20条相似文献，搜索用时 453 毫秒
1.
The early stages of southern Apennine development have been unraveled by integrating the available stratigraphic record provided by synorogenic strata (of both foredeep and wedge-top basin environments) with new structural data on the Liguride accretionary wedge cropping out in the Cilento area, southern Italy. Our results indicate that the final oceanic subduction stages and early deformation of the distal part of the Apulian continental margin were controlled by dominant NW–SE shortening. Early Miocene subduction-accretion, subsequent wedge emplacement on top of the Apulian continental margin and onset of footwall imbrication involving detached Apulian continental margin carbonate successions were followed by extensional deformation of the previously ‘obducted’ accretionary wedge. Wedge thinning also enhanced the development of accommodation space, filled by the dominantly siliciclastic Cilento Group deposits. The accretionary wedge units and the unconformably overlying wedge-top basin sediments experienced renewed NW–SE shortening immediately following the deposition of the Cilento Group (reaching the early Tortonian), confirming that the preceding wedge thinning represented an episode of synorogenic extension occurring within the general framework of NW–SE convergence. The documented Early to the Late Miocene steps of southern Apennine development are clearly distinct with respect to the subsequent (late Tortonian-Quaternary) stages of fold and thrust belt evolution coeval with Tyrrhenian back-arc extension, which were characterized by NE-directed thrusting in the southern Apennines. 相似文献
2.
《Journal of Geodynamics》2008,45(3-5):129-148
The Andes between 36°30′ and 37°S represent a Cretaceous fold and thrust belt strongly reactivated in the late Miocene. Most of the features that absorbed Neogene shortening were already uplifted in the late Cretaceous, as revealed by field mapping and confirmed by previous fission track analysis. This Andean section is formed by two sectors: a western-inner sector generated by the closure of the upper Oligocene-lower Miocene intra-arc Cura Mallín basin between the middle and late Miocene (Guañacos fold and thrust belt), and an eastern-outer sector, where late Triassic-early Jurassic extensional depocenters were exhumed in two discrete phases of contraction, in the latest early Cretaceous and late Miocene to the Present, respectively (Chos Malal fold and thrust belt). Late Miocene deformation has not homogeneously reactivated Cretaceous compressive structures, being minimal south of 37°30′S through the eastern-outer sector (southern continuation of the Chos Malal fold and thrust belt). The reason for such an inhomogeneous deformational evolution seems to be related to the development of a late Miocene shallow subduction regime between 34°30′ and 37°45′S, as it was proposed in previous studies. This shallow subduction zone is evidenced by the eastward expansion of the arc that was accompanied by the eastern displacement of the orogenic front at these latitudes. As a result, the Cretaceous fold and thrust belt were strongly reactivated north of 37°30′S producing the major topographic break along the Southern Central Andes. 相似文献
3.
Andrs Folguera Víctor A. Ramos Toms Zapata Mauro G. Spagnuolo 《Journal of Geodynamics》2007,44(3-5):129-148
The Andes between 36°30′ and 37°S represent a Cretaceous fold and thrust belt strongly reactivated in the late Miocene. Most of the features that absorbed Neogene shortening were already uplifted in the late Cretaceous, as revealed by field mapping and confirmed by previous fission track analysis. This Andean section is formed by two sectors: a western-inner sector generated by the closure of the upper Oligocene-lower Miocene intra-arc Cura Mallín basin between the middle and late Miocene (Guañacos fold and thrust belt), and an eastern-outer sector, where late Triassic-early Jurassic extensional depocenters were exhumed in two discrete phases of contraction, in the latest early Cretaceous and late Miocene to the Present, respectively (Chos Malal fold and thrust belt). Late Miocene deformation has not homogeneously reactivated Cretaceous compressive structures, being minimal south of 37°30′S through the eastern-outer sector (southern continuation of the Chos Malal fold and thrust belt). The reason for such an inhomogeneous deformational evolution seems to be related to the development of a late Miocene shallow subduction regime between 34°30′ and 37°45′S, as it was proposed in previous studies. This shallow subduction zone is evidenced by the eastward expansion of the arc that was accompanied by the eastern displacement of the orogenic front at these latitudes. As a result, the Cretaceous fold and thrust belt were strongly reactivated north of 37°30′S producing the major topographic break along the Southern Central Andes. 相似文献
4.
为揭示活动陆缘深水褶皱冲断带的特征及成因,本文利用地震和区域地质资料的综合分析,系统阐述了文莱—沙巴盆地深水褶皱冲断带的构造变形特征,并结合盆地演化动力学特点,探讨其构造变形机制及其对深水区油气成藏的影响.研究结果表明,文莱—沙巴盆地深水褶皱冲断带具有"垂向分期、平面分段"的特点,垂向上,以中中新统底界面为界可划分为下部（始新世-早中新世）和上部（中中新世-现今）两套逆冲褶皱冲断体系,其中下部逆冲褶皱冲断带的形成与古南海的俯冲作用密切相关,上部逆冲褶皱冲断带是中中新世以来三角洲前缘重力滑动与苏禄海扩张造成的区域挤压应力远程效应共同作用的结果,且苏禄海扩张造成的远程挤压效应主控平面上南北段褶皱冲断带变形的差异性,导致北段褶皱变形强度大于南段,具有背斜褶皱数量多、褶皱间距离短、逆冲断层倾角陡的特点,南段反之;且晚上新世以来北段深水区地层缩短量大于陆架区伸展量,两者之差为2~6 km,而南段两者相当,仅受三角洲前缘重力滑动影响.整个褶皱冲断带发育断弯、断展、断滑褶皱等3种断层相关褶皱以及叠瓦扇和冲起构造2种逆冲构造组合,是多期NW向挤压应力作用下形成的大型逆冲推覆构造,以前展式向盆地扩展.此外,由于中中新世以来逆冲断层的持续活动,研究区深水褶皱冲断带发育众多构造圈闭,油气成藏条件优越,且南段优于北段,靠近陆坡的近端优于远端,可作为勘探部署重点. 相似文献
5.
The Elbistan Basin in the east-Central Anatolia is an intramontane structural depression in the interior part of the Anatolide-Tauride Platform. The Neogene fill in and around Elbistan Basin develops above the Upper Devonian to lower Tertiary basement and comprises two units separated by an angular unconformity: (1) intensely folded and faulted Miocene shallow marine to terrestrial and lacustrine sediments and (2) nearly flat-lying lignite-bearing lacustrine (lower unit) and fluvial (upper unit) deposits of Plio-Quaternary Ahmetçik Formation. The former is composed of Lower-Middle Miocene Salyan, Middle-upper Middle Miocene Gövdelidağ and Upper Miocene Karamağara formations whereas the latter one is the infill of the basin itself in the present configuration of the Elbistan Basin. The basin is bound by normal faults with a minor strike-slip component. It commenced as an intramontane pull-apart basin and developed as a natural response to Early Pliocene tectonic escape-related strike-slip faulting subsequent to post-collisional intracontinental compressional tectonics during which Miocene sediments were intensely deformed. The Early Pliocene time therefore marks a dramatic changeover in tectonic regime and is interpreted as the beginning of the ongoing last tectonic evolution and deformation style in the region unlike to previous views that it commenced before that time. Consequently, the Elbistan Basin is a unique structural depression that equates the extensional strike-slip regime in east-Central Anatolia throughout the context of the neotectonical framework of Turkey across progressive collision of Arabia with Eurasia. Its Pliocene and younger history differs from and contrasts with that of the surrounding pre-Pliocene basins such as Karamağara Basin, on which it has been structurally superimposed. 相似文献
6.
Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China 总被引：43，自引：0，他引：43
Xiaomin Fang Carmala Garzione Rob Van der Voo Jijun Li Majie Fan 《Earth and Planetary Science Letters》2003,210(3-4):545-560
This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau. 相似文献
7.
This paper provides the structural analysis of the Chefchaouen area in the northern Rif. Here the Dorsale Calcaire superposes, by means of an excellently exposed thrust fault, onto the Predorsalian succession in turn tectonically covering the Massylian Unit. Hanging wall carbonates of the Dorsale Calcaire Unit form a WSW-verging regional fold with several parasitic structures, deformed by late reverse faults in places indicating an ENE vergence. A 200 m thick shear zone characterizes the upper part of the Predorsalian succession, located at footwall of the Dorsale Calcaire Unit. Here the dominantly pelitic levels are highly deformed by (i) C′ type shear bands indicating a mean WSW tectonic transport and (ii) conjugate extensional shear planes marking an extension both orthogonal and parallel to the shear direction. The Massylian Unit is characterized by a strain gradient increasing toward the tectonic contact with the overlying Predorsalian succession, where the dominantly pelitic levels are so highly deformed so as appearing as a broken formation. Such as the previous succession, conjugate extensional shear bands and normal faults indicate a horizontal extension parallel to the thrust front synchronous with the mainly WSW-directed overthrusting. The whole thrust sheet pile recorded a further shortening, characterized by a NW–SE direction, expressed by several reverse and thrust faults and related folds. Finally strike-slip and normal faults were the last deformation structures recorded in the analyzed rocks. A possible tectonic evolution for these successions is provided. In the late Burdigalian, the Dorsale Calcaire Unit tectonically covered the Predorsalian succession and together the Massylian Unit. The latter two successions were completely detached from their basement and accreted in the orogenic wedge within a general NE–SW shortening for the analyzed sector of the northern Rif. At lithosphere scale the thrust front migration was driven by roll back and slab tear mechanisms producing a synchronous arching and related counterclockwise rotation of the tectonic prism along the African margin. Radial displacement involved extension parallel to the thrust front well-recorded in the analyzed rocks. The NE–SW shortening, probably acting in the Tortonian–Pliocene interval, was related to the final compression of the Rif Chain resulting in out-of-sequence thrusts affecting the whole orogenic belt. 相似文献
8.
江汉盆地构造模式和演化及其与中强地震关系研究 总被引：2，自引：0，他引：2
本文通过对江汉盆地地震物探的剖析,结合该地区大地构造环境特点,指出盆地主要有三个发展阶段组成:前陆盆地阶段(中三叠-晚侏罗纪),主要受秦岭大别逆冲推覆,前缘挠曲形成前陆盆地,同期形成NW向和NEE-EW向两组断裂,从而奠定了盆地棋盘格网构造体系;断陷盆地阶段(白垩纪-老第三纪),断裂由原逆冲或逆走滑转变为正断性质,且控制盆地沉积中心,同时盆地发生顺时针旋转,岩浆活动强烈;新第三纪以来盆地阶段,盆地以坳陷为主,整体下降,表现为断裂对盆地沉积控制明显减弱,岩浆活动停止. 根据石油物探剖面建立了盆地的构造格架,即盆地内两组断裂及其形成的狭窄低凸起/地垒条带将盆地分为4个NNW向展布和3个NEE向展布凹陷带. 盆地地壳结构和小震分布及震源机制解显示地震集中在沉降最大的潜江-沔阳凹陷带附近,震源深度优势分布在15 km左右,即盆地基底附近. 相似文献
9.
The Volubilis Basin is located between two structural arcs formed by the Prerif Ridges that developed during and after sedimentation. The arcs correspond with W- to WSW-verging anticline culminations, limited, to the north by a NE-SW strike-slip lateral ramp. Sedimentary infill took place during two stages of ridge formation and propagation. The first stage occurred in the Middle Miocene-early Tortonian and was determined by the deposition of the Nappe Prérifaine in the northern part of the basin, and continental and marine sediments over the Prerif Ridges. The second one, Late Miocene in age (Tortonian–Messinian), corresponds to the sedimentation of calcarenites and bioclastic limestones at the basin edges, with a lateral transition to white and blue marls toward the center of the basin. There is clear evidence of synsedimentary deformation, suggesting the interaction of sedimentation and tectonics. Geophysical data allow us to characterize the stratigraphic architecture of the Volubilis Basin and the geometry of the top of the Paleozoic basement. An approximately N–S Tortonian–Messinian asymmetric depocenter is located close to the front of the eastern arc. This research illustrates the nucleation, progressive thrust bending and segmentation, and the propagation of folds interacting with sedimentation. Thrust nucleation agrees with Paleozoic basement highs under the detachment surface. The progressive development of these tectonic structures conditioned the formation, segmentation and final continentalization of the Volubilis Basin, which can be considered as a piggy-back basin. 相似文献
10.
通过对汶川地震前观测的碌曲—若尔盖—北川—中江大地电磁剖面的数据处理和反演解释,揭示了沿剖面的松潘—甘孜地块、川西前陆盆地、龙门山构造带及秦岭构造带50 km深度的电性结构特征及相互关系,表明青藏高原东缘向东挤压,迫使向东流动的地壳物质沿高原东缘堆积,并向扬子陆块逆冲推覆.龙门山恰好位于松潘—甘孜地块与扬子陆块对挤部位,主要受松潘—甘孜地块壳内高导层滑脱和四川盆地基底高阻体阻挡的约束,地壳深部存在着西倾且连续展布的壳内低阻层,表明龙门山深部确实存在着逆冲推覆构造,其逆冲断裂系中的三条断裂不仅以不同的倾角向西北倾斜,并且向深部逐渐汇集,但茂县—汶川断裂可能在深部与北川—映秀断裂是分离的.龙门山两翼的四川盆地和松潘甘孜褶皱带的电性结构既具有明显差异性,又具有一定的相关性.四川盆地显示巨厚的低阻沉积盖层和连续稳定的高阻基底的二元电性结构,而松潘—甘孜地块则表现为反向二元结构,即上部大套高阻褶皱带,下部整体为低阻的变化带,龙门山逆冲构造带本身又表现为松潘地块逆冲上覆在四川盆地之上,构成上部高阻褶皱带、中部低阻逆冲断裂带和底部盆地高阻基底的三层电性结构.对比龙门山逆冲构造断裂带的西倾延伸上下盘两侧的两个反对称的二元电性结构,松潘区块深部推断的结晶基底与龙门山断裂带下盘推断的下伏盆地结晶基底又存在某种内在对应关系,推断可能存在一个西延至若尔盖地块的泛扬子陆块.因此,龙门山构造带地壳电性结构研究对于揭示青藏高原东缘陆内造山动力过程,探索汶川大地震的深部生成机理都具有重要意义. 相似文献
11.
龙门山中南段前陆区是青藏高原东缘唯一发育新生代薄皮构造与沉积盆地的地段,研究其最新构造变形样式有助于深入理解青藏高原向东扩展的构造机理.论文通过青衣江河流阶地测量与古青衣江洪积扇形态重建,研究了龙门山南段前陆区晚第四纪活动构造格局及其活动性,取得了如下认识：（1）青衣江河流阶地纵剖面显示,龙门山南段前陆地区晚第四纪变形主要为褶皱作用,总体地壳缩短速率为2.5~3.9 mm·a-1,远大于山区冲断带0.48~0.77 mm·a-1的地壳缩短速率,地壳缩短主要由前陆地区吸收;（2）青衣江古洪积扇错断变形显示,龙门山南段前陆区活动构造表现为北西—南东向地壳缩短与近东西向的地壳缩短的叠加作用,两者分别受控于巴颜喀拉块体南东向推挤作用与川滇块体向东推挤作用;（3）自中新世初川滇块体向南东挤出,四川盆地西南角起到分流青藏高原物质的作用,其西南侧物质通过鲜水河—小江断裂带的左旋错动向南东方向分流,其西北侧物质通过龙门山断裂带的右旋错动向北东方向分流,迎面受到了最大的推挤作用,进而向前陆扩展形成了薄皮褶皱构造带. 相似文献
12.
库木库里盆地位于青藏高原北缘,与柴达木盆地一山之隔,是二者的过渡地带,也是高原主体部分向NE扩展的前缘地区;现今构造表现为被3条大型活动构造带(走滑的阿尔金断裂带、东昆仑断裂带和逆冲的祁漫塔格褶皱逆冲系)所夹持。因此,该盆地对于研究青藏高原北缘的构造活动性、活动历史,探讨高原的扩展模式具有十分重要的意义。虽然库木库里盆地南、北两侧均发育活动性很强的大型走滑断裂,但是在盆地中央发育1条大型背斜,走向NWW-SEE,与祁漫塔格褶皱逆冲系和柴达木盆地内的褶皱构造走向一致,说明盆地目前遭受NNE向的挤压。通过对盆地地形横、纵剖面和阶地展布形态的分析,得出背斜有自西向东扩展变形的特征;野外调查和测年结果显示,背斜东段冰川融水形成了大型冰水扇,形成年龄为(87.09±2.31)~(102.4±3.7)ka,进而获得背斜东段自晚更新世以来平均隆升速率的最大值为(2.78±0.28)~(3.28±0.28)mm/a。库木库里盆地整体的活动性很强,在构造上与其北边的柴达木盆地类似,都受控于阿尔金断裂南侧的NNE向的区域挤压作用。 相似文献
13.
Since the latest Oligocene–earliest Miocene the building of the Sicilian fold and thrust belt has been accompanied by development of a “peripheral” foreland basin system which migrated toward the foreland. In north-western Sicily, the sedimentary record of the foreland basin system migration is represented by a stratigraphic succession made up of several lithostratigraphic units, bounded by regional unconformity surfaces, deposited recording at least four main sedimentary phases, each characterized by the development of different types of syntectonic basins. 相似文献
14.
马尼拉俯冲带是南海的东部边界,记录了南海形成演化的关键信息,同时也是地震和海啸多发区域.本文利用过马尼拉俯冲带北段的高分辨率多道地震剖面,分析了研究区内海盆和海沟的沉积特征,精细刻画了区内增生楔前缘的构造变形、结构以及岩浆活动特征.研究区内增生楔下陆坡部分由盲冲断层、构造楔和叠瓦逆冲断层构成,逆冲断层归并于一条位于下中新统的滑脱面上,滑脱面向海方向的展布明显受到增生楔之下埋藏海山和基底隆起的影响;上陆坡的反射特征则因变形强烈和岩浆作用而难以识别;岩浆活动开始于晚中新世末期并持续至第四纪.马尼拉俯冲带北段增生楔的形成时间早于16.5 Ma,并通过前展式逆冲向南海方向扩展;马尼拉俯冲带的初始形成时间可能在晚渐新世,而此时南海海盆扩张仍在持续.南海东北缘19°N-21°N区域为南海北部陆坡向海盆的延伸,高度减薄的陆壳的俯冲造成马尼拉海沟北段几何形态明显地向东凹进. 相似文献
15.
Summary In central Europe, evidence for Cadomian basement occurs from the Midlands Massif in the United Kingdom to the Moesian Platform in Romania. The patchily exposed basement rocks either have survived almost intact through the Phanerozoic (e.g. Lusatia), overstepped by different Palaeozoic strata, or have been reworked to various degrees (e.g. Erzgebirge) and involved in Variscan structures (e.g. Sudetes, Moravia). In the Polish and German lowlands, undated subsurface basement occurs below the Permo-Mesozoic cover and Variscan molasse and flysch successions. The mutual relationships between the various Cadomian fragments occurring within and/or below the Palaeozoic, both orogenic and platform successions, are far from fully understood. 相似文献
16.
P. di Girolamo 《Bulletin of Volcanology》1984,47(3):421-432
Discrimination functions based on major element distribution (Pearce, 1976) can be used to define the different basalt types of the Tyrrhenian and Perityrrhenian areas in an attempt to clarify their geodynamic significance.The future Tyrrhenian and Perityrrhenian areas have been affected since Oligocene by either compressional (subduction related) or transitional processes which produced well-defined orogenic and anorogenic magmas. A local development of «transitional» magma types, characteristic of «anomalous» volcanic arcs, also occurred with geochemical features that are intermediate between within-plate and orogenic magmas.The eruption of orogenic rock suites (calcalkaline, shoshonitic and leucite-bearing rocks) took place along the Apennine border on the east and southeast of the Tyrrhenian basin from Upper Miocene to Quaternary (Aeolian and neighbouring seamounts; Campania; Latium; Capraia Island). Absence of spatial zonation and interlayering of products with a various potassic character are the peculiar features of these rocks that appear to be originated from a heterogeneous and variously metasomatized mantle source by the influx of fluids (H2O andLile enrichment) from the subduction zone affecting the Apennine-Maghrebides collisional front during Tertiary times.In the central Tyrrhenian area oceanic tholeiitic magmatism and creation of a new oceanic crust occurred from Upper Miocene. This activity was probably accomplished by Lower Pliocene when a within-plate volcanism produced the seamounts of the Batial Plain (Magnaghi, Vavilov, base of the Marsili Smts.).Etna and Ustica volcanisms occurring along the Perityrrhenian border on the south and west the Aeolian volcanism respectively, show geochemical characteristics that are transitional between anorogenic and orogenic magmas which could indicate some influence of fluids subduction-related to their mantle sources.The complex magmatic situation of the Tyrrhenian and Perityrrhenian areas may be caused by magma-producing events either from unmodified (anorogenic) or variously modified mantle sources (transitional to orogenic) depending on their proximity to and influenced by the Cainozoic subduction zone which developed along the Apennines-Maghrebides collisional front. 相似文献
17.
Formation and deformation processes of the late Paleogene sedimentary basins related to a strike–slip fault system in southern central Hokkaido are described by a combination of paleomagnetic study and numerical analysis. After correction of the Miocene counter‐clockwise rotation associated with back‐arc opening of the Japan Sea, paleomagnetic declination data obtained from surface outcrops in the Umaoi and Yubari areas show significant easterly deflections. Although complicated differential rotation is anticipated as a result of recent thrust movements, clockwise rotation in the study areas is closely linked with development of the Paleogene Minami‐naganuma Basin as a pull‐apart depression along the north–south fault system. Numerical modeling suggests that 30 km of strike–slip is required to restore the distribution and volume of the Minami‐naganuma Basin. The relative slip rate on the long‐standing fault system is about 10 mm/yr, which corresponds to global‐scale plate motion. It has inevitably caused regional rearrangement of the eastern Eurasian margin. A rotation field simulated by simplified dextral motion using dislocation modeling basically accords with the paleomagnetic data around the pull‐apart basin. 相似文献
18.
Active intracontinental transpressional mountain building in the Mongolian Altai: Defining a new class of orogen 总被引：5，自引：0，他引：5
Dickson Cunningham 《Earth and Planetary Science Letters》2005,240(2):436-444
Mountain ranges that are actively forming around the western and northern perimeter of the Indo-Eurasia collisional deformational field, such as the Mongolian Altai, comprise a unique class of intracontinental intraplate transpressional orogen with structural and basinal elements that are distinct from contractional and extensional orogens. Late Cenozoic uplift and mountain building in the Mongolian Altai is dominated by regional-scale dextral strike-slip faults that link with thrust and oblique-slip faults within a 300-km-wide deforming belt sandwiched between the more rigid Junggar Basin block and Hangay Precambrian craton. Dominant orogenic elements in the Mongolian Altai include double restraining bends, terminal restraining bends, partial restraining bends, single thrust ridges, thrust ridges linked by strike-slip faults, and triangular block uplifts in areas of conjugate strike-slip faults. The overall pattern is similar to a regional strike-slip duplex array; however, the significant amount of contractional and oblique-slip displacement within the range and large number of historical oblique-slip seismic events renders the term “transpressional duplex” more accurate. Intramontane and range flanking basins can be classified as ramp basins, half-ramp basins, open-sided thrust basins, pull-apart basins, and strike-slip basins. Neither a classic fold-and-thrust orogenic wedge geometry nor a bounding foredeep exists. The manner in which upper crustal transpressional deformation is balanced in the lower crust is unknown; however, crustal thickening by lower crustal inflation and northward outflow of lower crustal material are consistent with existing geological and geodetic data and could account for late Cenozoic regional epeirogenic uplift in the Russian Altai and Sayan regions. 相似文献
19.
A REVIEW OF MOUNTAIN-BASIN COUPLING OF JIANGHAN AND DONGTING BASINS WITH THEIR SURROUNDING MOUNTAINS
Sedimentary basin and orogenic belt are two important components of continental structure with internal genetic links. The study of the basin-mountain coupling can reconstruct and restore the coupling relationships between the deep lithosphere process, near-surface structure and climate change over time. The Jianghan-Dongting Basin locates in the middle reaches of the Yangtze River, presenting a clear basin and mountain boundary with the Qinling-Dabie Shan to the north, the Mufu Shan to the southeast, the Wuling Shan to the southwest, and the E'xi Mountain to the west, respectively.
The Meso-Cenozoic Jianghan-Dongting Basin was affected by the subduction and collision of the Pacific plate and the Indian Ocean plate on the Eurasian continent, resulting in multiple tectonic evolution processes. There are some big rivers pouring into the Jianghan-Dongting Basin, such as the Yangtze River, Hanjiang River, Ba River, Xiangjiang River, and Yuanjiang River, etc. to serve as the material transport belts linking between the orogenic belt denudation and basin deposition. Therefore, the Jianghan-Dongting Basin has become a multi-source sedimentary basin, which makes it a natural laboratory to explore the geological processes from source to sink. Because the low-temperature thermochronology(e.g. fission-track and(U-Th)/He)can record the recent uplift time of mountains, they are widely used on the bedrock samples and the detrital synorogenic sediments in basins to constrain the surface uplift time of the orogenic belt. Hence, in the first parts of the paper we summarize and sort out the research results of basin-mountain coupling process in the Jianghan-Dongting Basin, evaluate the research results, identify the existing problems, and propose new research directions. After that, we introduce the applications of low-temperature thermochronology on the bedrock within the orogenic belt, basin and river sediments, combined with the actual situation of Jianghan-Dongting Basin, and put forward a new research breakthrough point. It is found that the Jianghan-Dongting Basin is very suitable for the study of low-temperature thermalchronology on detrital minerals. However, it should combine the low-temperature thermochronology results of both orogenic belt and river sediments with the provenance analysis on the same target minerals, building the connection between the exhumation and provenance information on the orogenic belt, thus providing the detailed evolution of mountain-basin coupling process. 相似文献
20.
Field data and seismic reflection profiles of various resolutions, calibrated by deep well logs, have been used to unravel the tectonic evolution of the Crati Basin (southern Italy). The study area is located in the northern portion of the Calabrian Arc, a well-developed arc-shaped feature of the circum-Mediterranean belts, consisting of a series of ophiolite-bearing tectonic units and overlying basement nappes. NW–SE oriented left-lateral strike-slip faults exerted a major control on the tectonic evolution of northern-central Calabria, from Middle Miocene to Lower Pleistocene times. Such faults, arranged in an en-échelon geometry and dissecting the pre-existing Late Oligocene–Early Miocene orogenic belt, led to a structural setting including major N-S striking synforms – as the offshore Paola Basin and the Crati Basin are interpreted based on our results – separated by a broad antiformal ridge. Since the Middle Pleistocene, both E- and W-dipping normal faults developed in the southernmost sector of the Crati Basin, probably as a consequence of both uplift of the orogenic edifice and Tyrrhenian back-arc extension. The pre-existing regional strike-slip faults became inactive in this sector of the belt. However, working as persistent barriers, it is envisaged here that they inhibited the southern propagation of the newly formed normal faults, which therefore propagated towards the north. A minimum value of cumulative displacement of ca. 600 m has been unraveled for the central sector of the Crati Basin since Middle Pleistocene times. This yields a vertical strain rate of ca. 0.9 mm/y during the last 700 ka. 相似文献