共查询到20条相似文献，搜索用时 31 毫秒
1.
深埋碳质千枚岩力学特性及其能量损伤演化机制 总被引：1，自引：0，他引：1
为揭示深埋碳质千枚岩的遇水软化损伤特性和微层理结构的各向异性,开展了不同层理角度和不同含水状态下的千枚岩力学试验。并基于能量损伤演化机制分析了层理角度和含水状态对千枚岩储能机制和释能机制的影响。研究结果表明：深埋碳质千枚岩的各向异性特性和遇水软化效应是千枚岩内部的沉积层理、层状薄片矿物和高黏土矿物成分导致的固有特性;其破坏机制及其强度各向异性主要受控于层理面间的弱胶结作用,这种弱面效应会随着围压的增大而降低;千枚岩遇水后其力学特性和脆性被弱化,宏观破坏角增大,表现出张拉破坏减弱,剪切破坏增强;基于弹性能和耗散能比例曲线的S型变化规律与能量演化规律,将岩石的渐进破裂演化过程划分为4个阶段,并采用能量损伤演化理论探讨了I型和II型两种典型岩石破坏方式的能量机制及其损伤演化机制;层理方向和含水状态对千枚岩的储能能力具有较大影响,其中层理方向对千枚岩的释能机制和损伤破裂演化机制影响不大,而千枚岩的储能与释能机制则对含水状态的变化更为敏感。 相似文献
2.
3.
Many clay rocks have distinct bedding planes. Experimental studies have shown that their mechanical properties evolve with the degree of saturation (DOS), often with higher stiffness and strength after drying. For transversely isotropic rocks, the effects of saturation can differ between the bed-normal (BN) and bed-parallel (BP) directions, which gives rise to saturation-dependent stiffness and strength anisotropy. Accurate prediction of the mechanical behavior of clay rocks under partially saturated conditions requires numerical models that can capture the evolving elastic and plastic anisotropy with DOS. In this study, we present an anisotropy framework for coupled solid deformation-fluid flow in unsaturated elastoplastic media. We incorporate saturation-dependent strength anisotropy into an anisotropic modified Cam-Clay (MCC) model and consider the evolving anisotropy in both the elastic and plastic responses. The model was calibrated using experimental data from triaxial tests to demonstrate its capability in capturing strength anisotropy at various levels of saturation. Through numerical simulations, we demonstrate the role of evolving stiffness and strength anisotropy in the mechanical behavior of clay rocks. Plane strain simulations of triaxial compression tests were also conducted to demonstrate the impacts of material anisotropy and DOS on the mechanical and fluid flow responses. 相似文献
4.
沉积岩的一种各向异性模型 总被引：1，自引：0，他引：1
给出了沉积岩的一种各向异性模型。用一个各向异性参数描述这类材料的固有各向异性，各向异性参数和单轴抗压强度是一个分布函数，其分布用一个微结构张量和加载方向表示。建立了一个描述各向异性沉积岩变形过程的全塑性模型。用该模型对这一些三轴试验进行了模拟，结果表明该模型能有效地描述沉积岩的固有各向异性。 相似文献
5.
Geomaterials such as soils and rocks can exhibit inherent anisotropy due to the preferred orientation of mineral grains and/or cracks. They can also be partially saturated with multiple types of fluids occupying the pore space. The anisotropic and unsaturated behaviors of geomaterials can be highly interdependent. Experimental studies have shown that the elastic parameters of rocks evolve with saturation. The effect of saturation has also been shown to differ between directions in transversely isotropic clay rock. This gives rise to saturation-dependent stiffness anisotropy. Similarly, permeability anisotropy can also be saturation-dependent. In this study, constitutive equations accommodating saturation-dependent stiffness and hydraulic anisotropy are presented. A linear function is used to describe the relationship between the elastic parameters and saturation, while the relative permeability–saturation relationship is characterized with a log-linear function. These equations are implemented into a hydromechanical framework to investigate the effects of saturation-dependent properties on the shrinkage behavior of clay rocks. Numerical simulations are presented to demonstrate the role of saturation-dependent stiffness and hydraulic anisotropy in shrinkage behavior. The results highlight that strain anisotropy and time evolution of pore pressures are substantially influenced by saturation-dependent stiffness and hydraulic anisotropy.
相似文献6.
Consideration of fabric anisotropy is crucial to gaining an improved understanding of the behavior of granular materials. This paper presents a constitutive model to describe the sand behavior associated with fabric anisotropy within a framework of a strain space multiple mechanism model. In the proposed model, a second-order fabric tensor is extended by incorporating a new function that represents the effect of inherent (or initial fabric) anisotropy, along with three additional parameters: two of them, a1 and a2 , control the degree of anisotropy, and the second mode of inherent anisotropy can be expressed by introducing the parameter a2 as well as the first mode by the parameter a1 . The third parameter, θ0 , expresses the principal direction of inherent anisotropy (eg, the normal vector direction of bedding planes relative to horizontal axis). The formulation of the dilative component of dilatancy (ie, positive dilatancy) is also extended to consider the effect of inherent anisotropy based on the interlocking mechanism. Experimental data on the complex anisotropic responses of Fraser River sand and Toyoura sand under monotonic loading is used to validate this model. The proposed model is shown to successfully capture anisotropic responses, which become contractive or dilative depending on different principal-stress directions, with a single set of anisotropy parameters; thus, the model is considered to possess the capability to simulate the anisotropic behaviors of granular materials. In addition to different loadings on the same fabric, the effects of different fabric anisotropies upon the sand behavior under the same loadings are also investigated. 相似文献
7.
Coal swelling/shrinkage during gas adsorption/desorption is a well-known phenomenon. For some coals the swelling/shrinkage shows strong anisotropy, with more swelling in the direction perpendicular to the bedding than that parallel to the bedding. Experimental measurements performed in this work on an Australian coal found strong anisotropic swelling behaviour in gases including nitrogen, methane and carbon dioxide, with swelling in the direction perpendicular to the bedding almost double that parallel to the bedding. It is proposed here that this anisotropy is caused by anisotropy in the coal's mechanical properties and matrix structure. The Pan and Connell coal swelling model, which applies an energy balance approach where the surface energy change caused by adsorption is equal to the elastic energy change of the coal solid, is further developed to describe the anisotropic swelling behaviour incorporating coal property and structure anisotropy. The developed anisotropic swelling model is able to accurately describe the experimental data mentioned above, with one set of parameters to describe the coal's properties and matrix structure and three gas adsorption isotherms. This developed model is also applied to describe anisotropic swelling measurements from the literature where the model was found to provide excellent agreement with the measurement. The anisotropic coal swelling model is also applied to an anisotropic permeability model to describe permeability behaviour for primary and enhanced coalbed methane recovery. It was found that the permeability calculation applying anisotropic coal swelling differs significantly to the permeability calculated using isotropic volumetric coal swelling strain. This demonstrates that for coals with strong anisotropic swelling, anisotropic swelling and permeability models should be applied to more accurately describe coal permeability behaviour for both primary and enhanced coalbed methane recovery processes. 相似文献
8.
页岩储层通常呈薄层状结构,一般认为其岩石力学参数具有横向各向同性,而其各向异性受围压（CP）、含水率和总有机质含量（TOC）等多种因素的影响。本文对不同围压下的鹰滩（Eagle Ford）页岩进行超声波波速进行测试实验,研究围压对鹰滩页岩波速及岩石力学各向异性的影响。实验结果表明,鹰滩页岩属于弱各向异性多孔介质,并具有横向各向同性、垂向各向异性的性质。纵波（P波）和横波（S波）波速随围压的增大而增大,特别是在低围压范围内增幅显著,同时围压增大会降低纵波和横波的各向异性,纵波各向异性比横波各向异性对围压更敏感。对鹰滩页岩各向异性分析为页岩储层压裂过程中裂缝的起裂和延伸规律研究提供了必要的力学参数。 相似文献
9.
《国际地质力学数值与分析法杂志》2018,42(16):1917-1934
Accurate prediction of strength in rocks with distinct bedding planes requires knowledge of the bedding plane orientation relative to the load direction. Thermal softening adds complexity to the problem since it is known to have significant influence on the strength and strain localization properties of rocks. In this paper, we use a recently proposed thermoplastic constitutive model appropriate for rocks exhibiting transverse isotropy in both the elastic and plastic responses to predict their strength and strain localization properties. Recognizing that laboratory‐derived strengths can be influenced by material and geometric inhomogeneities of the rock samples, we consider both stress‐point and boundary‐value problem simulations of rock strength behavior. Both plane strain and 3D loading conditions are considered. Results of the simulations of the strength of a natural Tournemire shale and a synthetic transversely isotropic rock suggest that the mechanical model can reproduce the general U‐shaped variation of rock strength with bedding plane orientation quite well. We show that this variation could depend on many factors, including the stress loading condition (plane strain versus 3D), degree of anisotropy, temperature, shear‐induced dilation versus shear‐induced compaction, specimen imperfections, and boundary restraints. 相似文献
10.
Selected gas pulse tests on initially saturated claystone samples under isotropic confinement pressure are simulated using a 3D thermo‐hydro‐mechanical code. The constitutive model considers the hydro‐mechanical anisotropy of argillaceous rocks. A cross‐anisotropic linear elastic law is adopted for the mechanical behaviour. Elements for a proper modelling of gas flow along preferential paths include an embedded fracture permeability model. Rock permeability and its retention curve depend on strains through a fracture aperture. The hydraulic and mechanical behaviours have a common anisotropic structure. Small‐scale heterogeneity is considered to enhance the initiation of flow through preferential paths, following the direction of the bedding planes. The numerical simulations were performed considering two different bedding orientations, parallel and normal to the imposed flow in the test. Simulations are in agreement with recorded upstream and downstream pressures in the tests. The evolution of fluid pressures, degree of saturation, element permeability and stress paths are presented for each case analysed. This information provides a good insight into the mechanisms of gas transport. Different flow patterns are obtained depending on bedding orientation, and the results provide an explanation for the results obtained in the tests. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
11.
12.
页岩力学各向异性特征是地应力、井壁稳定、水力裂缝扩展相关研究的重要基础参数。针对页岩力学各向异性宏观测试中存在样品制取困难、制样成功率低的特点,采用来源丰富的钻井岩屑或破碎岩块,通过研究纳米压痕实验原理、实验方法和数据解释方法,采用连续刚度测试方法对平行层理和垂直层理的页岩试样进行纳米压痕测试;基于硬度的分类准则将纳米压痕数据分为三类主要矿物基质进行合理解释,采用接触刚度法计算硬度、杨氏模量,采用能量法计算断裂韧性,得出了页岩粘土基质的杨氏模量、硬度和断裂韧性。测试结果表明这种基于硬度的分类准则处理纳米压痕数据是方便合理的。页岩粘土基质力学特性在纳米尺度上具有各向异性,纳米尺度力学参数与层理方向相关。页岩不同力学参数的各向异性表现不同,杨氏模量各向异性较弱,断裂韧性各向异性较强。平行层理方向断裂韧性为垂直层理方向断裂韧性的80%。 相似文献
13.
Diansen Yang Serge Chanchole Pierre Valli Liufeng Chen 《Rock Mechanics and Rock Engineering》2013,46(2):247-257
Due to various factors, such as sedimentation, layered morphology of clay minerals, in situ stress, etc., argillite rocks often exhibit anisotropic behavior. In order to study the anisotropic properties of the Callovo-Oxfordian (COx) argillite of the Meuse–Haute-Marne site in France considered as a possible host rock for high-level radioactive nuclear waste repository, a series of tests including uniaxial compression and dehydration and hydration at different constant applied stress levels are carried out. In this study, a specific setup combining moisture and mechanical loading with optical observation is used and it allows to continuously capture surface images from which the full-field strains are determined by using Digital Image Correlation techniques. The results show evidence of the mechanical and hydric anisotropy of the material. The anisotropy parameters are identified, assuming the studied argillite as transversely isotropic. The shrinkage and swelling depend on the applied stress and the angle with respect to the vertical direction of the mechanical load and the stratification plane, and this dependence is quantified. The non-linearity and the hysteresis observed during dehydration and hydration cycles are discussed. 相似文献
14.
A numerical representation that explicitly represents the generalized three-dimensional anisotropy of folded fractured-sedimentary rocks in a groundwater model best reproduces the salient features of the flow system in the Shenandoah Valley, USA. This conclusion results from a comparison of four alternative representations of anisotropy in which the hydraulic-conductivity tensor represents the bedrock structure as (model A) anisotropic with variable strikes and dips, (model B) horizontally anisotropic with a uniform strike, (model C) horizontally anisotropic with variable strikes, and (model D) isotropic. Simulations using the US Geological Survey groundwater flow and transport model SUTRA are based on a representation of hydraulic conductivity that conforms to bedding planes in a three-dimensional structural model of the valley that duplicates the pattern of folded sedimentary rocks. In the most general representation, (model A), the directions of maximum and medium hydraulic conductivity conform to the strike and dip of bedding, respectively, while the minimum hydraulic-conductivity direction is perpendicular to bedding. Model A produced a physically realistic flow system that reflects the underlying bedrock structure, with a flow field that is significantly different from those produced by the other three models. 相似文献
15.
It is well known that soil is inherently anisotropic and its mechanical behavior is significantly influenced by its fabric anisotropy. Hypoplasticity is increasingly being accepted in the constitutive modeling for soils, in which many salient features, such as nonlinear stress-strain relations, dilatancy, and critical state failure, can be described by a single tensorial equation. However, within the framework of hypoplasticity, modeling fabric anisotropy remains challenging, as the fabric and its evolution are often vaguely assumed without a sound basis. This paper presents a hypoplastic constitutive model for granular soils based on the newly developed anisotropic critical state theory, in which the conditions of fabric anisotropy are concurrently satisfied along with the traditional conditions at the critical state. A deviatoric fabric tensor is introduced into the Gudehus-Bauer hypoplastic model, and a scalar-valued anisotropic state variable signifying the interplay between the fabric and the stress state is used to characterize its impact on the dilatancy and strength of the soils. In addition, fabric evolution during shearing can explicitly be addressed. Modifications have also been undertaken to improve the performance of the undrained response of the model. The anisotropic hypoplastic model can simulate experimental tests for sand under various combinations of principle stress direction, intermediate principal stress (or mode of shearing), soil densities, and confining pressures, and the associated drastic effect of different principal stress orientations in reference to the material axes of anisotropy can be well captured. 相似文献
16.
用三维梁-颗粒模型BPM3D(beam-particlemodelinthreedimensions)对岩石类非均质脆性材料的力学性质和破坏过程进行了数值模拟。梁-颗粒模型是在离散单元法基础上,结合有限单元法中的网格模型提出的用于模拟岩石类材料损伤破坏过程的数值模型。在模型中,材料在细观层次上被离散为颗粒单元集合体,相邻颗粒单元由有限单元法中的弹脆性梁单元联结。梁单元的力学性质均按韦伯(Weibull)分布随机赋值,以模拟岩石类材料力学参数的空间变异性。材料内部裂纹通过断开梁单元来模拟。通过自动生成的非均质材料模型对岩石类材料的破坏机理进行研究。岩石类非均质脆性材料在单轴压缩状态下破坏过程细观数值模拟结果显示,岩石材料宏观破坏是由于其内部细观裂纹产生、扩展、贯通的结果。通过数值模拟结果之间的对比分析,揭示出岩石试样宏观破坏模式随细观层次上韦伯分布参数的变化而不同。与实际矿柱破坏形态的对比分析表明了模型的适用性。根据数值模拟结果对岩石类非均质材料的破坏机理进行了探讨。 相似文献
17.
18.
为了研究层状千枚岩的力学特性与各向异性特征,开展了不同层理倾角与不同围压下的千枚岩力学试验。对比分析了千枚岩试样强度、变形、脆性与破坏模式等各向异性特征。结果表明:(1)随着层理倾角β增加,岩样的强度、变形特征曲线形状呈U型;随围压增加,岩样强度及塑性增强,各向异性度逐渐减弱稳定。(2)采用多种强度准则描述岩样强度各向异性,其中Saeidi准则和改进Ramamurthy准则能很好地预测岩样在不同层理倾角下的抗压强度。(3)基于岩样峰前应力-应变曲线与能量特征提出了综合脆性评价指标,在层理倾角β=45°左右时,岩样脆性指标较低,更易发生剪切滑移破坏,得出脆性下降顺序为:沿层理面拉伸劈裂>穿层理面拉伸劈裂>沿层理面剪切>穿层理面剪切。(4)千枚岩的破坏模式与层理倾角和围压有关,单轴条件下,岩样劈裂破坏后易形成复杂裂纹网络;高围压下,岩样破裂后多形成单一的沿层理面或贯穿多层理面的剪切破坏。 相似文献
19.
基于静载条件下的常规力学试验可以证明,页岩层理面的存在是导致其力学行为各向异性的主要原因,而应变率的变化势必也影响着页岩各向异性特征的变化。为探究应变率对页岩各向异性力学行为的影响,分别在10-4 s-1、5×10-4 s-1、10-3 s-1和10-2 s-1 4种应变率条件下对不同层理角度的页岩进行单轴压缩力学试验。研究表明:（1）页岩弹性模量的各向异性程度随应变率升高而减弱,泊松比的各向异性程度受应变率的影响不明显;（2）页岩峰值强度随应变率升高而增加,其中45°~60°试样应变率敏感性最强,页岩的强度各向异性度随应变率升高而降低;（3）随着应变率升高,层理面对页岩破坏模式的控制作用得到削弱,破坏模式的各向异性程度减弱。总体而言,页岩的各向异性力学特征随应变率升高而减弱,研究结论有助于页岩力学行为的深入理解。 相似文献
20.
页岩各向异性特征的试验研究 总被引：9，自引：0，他引：9
为研究彭水页岩气区块储层的各向异性特征,开展了石柱县龙马溪组页岩的单轴和三轴压缩试验,分析了其力学特性、强度特征和破裂模式的各向异性,并揭示了其破坏机制的各向异性。结果表明：(1) 龙马溪组页岩具有明显的各向异性特征,弹性模量在平行层理方向最大,垂直层理方向最小,且围压的增加使其增加速率不断减小;0°、30°和60°、90°页岩的泊松比随围压的增加呈现出了相反的变化规律,这可能与页岩层理间孔隙和微裂缝的良好发育有关。(2) 相同围压下,0°试样强度最高,90°次之,30°最低,总体上呈现出两边高、中间低的U型变化规律,而不同角度的Hoek-Brown强度准则能较好地反映其强度的各向异性特征。(3) 页岩破裂模式的各向异性是由破坏机制的各向异性引起的,而强度的各向异性是由破坏机制的各向异性控制的。单轴压缩时,0°页岩为沿层理的张拉劈裂破坏,30°为沿层理的剪切滑移破坏,60°为贯穿层理和沿层理的复合剪切破坏,90°为贯穿层理的张拉破坏。三轴压缩时,0°为贯穿层理的共轭剪切破坏,30°为沿层理的剪切滑移破坏,60°和90°为贯穿层理的剪切破坏;页岩地层的层状沉积结构和层理间的弱胶结作用是破坏机制各向异性的根源。研究结果为水平井井壁的稳定性分析和水力压裂施工设计等提供了技术参考。 相似文献