共查询到20条相似文献，搜索用时 15 毫秒
1.
Fabrics in the mid-crustal Bronson Hill zone of the southern New England Appalachian orogen record a range of apparent finite strains and conflicting kinematics, but structural relationships indicate coeval development. At the smallest scale of this study, shortening was accommodated in granitic orthogneiss, while transcurrent deformation was partitioned into relatively thin zones of metastratified rocks along the margins. The Monson orthogneiss can be broadly characterized by subvertical to steeply dipping S > L tectonites, subvertical to subhorizontal stretching lineations, closed to isoclinal folds, and dextral/reverse kinematics. The east-bounding Conant Brook shear zone and Greenwich syncline are characterized by steeply dipping mylonitic foliations, a range of lineations, and dextral/reverse kinematic indicators. The west-bounding Mt. Dumplin high strain zone is comprised of steeply dipping mylonites, subhorizontal lineations, and sinistral/normal kinematics. These structures reflect coeval partitioned dextral transpression, vertical extrusion, and north-directed lateral escape of the orthogneiss that was facilitated by bounding conjugate shear zones. Comparison of structural subdomains with transpressional modeling indicates vertical pseudo-monoclinic to inclined triclinic coaxial to simple shear influenced transpression. Compatibility between laterally adjacent subdomains was maintained by meso-/microscale partitioning. Absolute and relative timing constraints show that transpression was sustained from 330 Ma to 300 Ma. 相似文献
2.
《Journal of Structural Geology》1999,21(8-9):969-974
Forward modeling of transpression–transtension, assuming homogeneous strain and a direct relationship between finite strain axes and foliation–lineation in tectonites, investigates fields of stability of foliation and lineation orientations in oblique convergence and divergence. Vertical foliation–horizontal lineation (VF–HL) develop for angles of convergence–divergence between 0 and 20°. With increasing finite strain, this narrow window of stability is further reduced; lineation switches to vertical in transpression and foliation switches to horizontal in transtension. If a shear zone contains VF–HL, it either developed as a zone very close to pure wrenching, or recorded low finite strain. The stability of VF–HL at high strain and higher angles of convergence is enhanced by lateral extrusion of material along transpression zones. VF–HL may be stabilized in magmatic bodies that progressively intrude transtension zones, if the wrench component of deformation partitions within them. Alternatively, if these bodies are dike-like, cool fast, and do not record large deformation, they take up the extension component of transtension through anisotropic volume addition, leaving a larger component of wrench deformation in the country rocks; this effect stabilizes VF–HL effectively at low strain, but only marginally so at high strain. 相似文献
3.
Schistose mylonitic rocks in the central part of the Alpine Fault (AF) at Tatare Stream, New Zealand are cut by pervasive extensional (C′) shear bands in a well-understood and young, natural ductile shear zone. The C′ shears cross-cut the pre-existing (Mesozoic—aged) foliation, displacing it ductilely synthetic to late Cenozoic motion on the AF. Using a transect approach, we evaluated changes in geometrical properties of the mm–cm-spaced C′ shear bands across a conspicuous finite strain gradient that intensifies towards the AF. Precise C′ attitudes, C′-foliation dihedral angles, and C′–S intersections were calculated from multiple sectional observations at both outcrop and thin-section scales. Based on these data the direction of ductile shearing in the Alpine mylonite zone during shear band activity is inferred to have trended >20° clockwise (down-dip) of the coeval Pacific-Australia plate motion, indicating some partitioning of oblique-slip motion to yield an excess of “dip-slip” relative to plate motion azimuth, or some up-dip ductile extrusion of the shear zone as a result of transpression, or both. Constant attitude of the mylonitic foliation across the finite strain gradient indicates this planar fabric element was parallel to the shear zone boundary (SZB). Across all examined parts of the shear zone, the mean dihedral angle between the C′ shears and the mylonitic foliation (S) remains a constant 30 ± 1° (1σ). The aggregated slip accommodated on the C′ shear bands contributed only a small bulk shear strain across the shear zone (γ = 0.6–0.8). Uniformity of per-shear slip on C′ shears with progression into the mylonite zone across the strain gradient leads us to infer that these shears exhibited a strain-hardening rheology, such that they locked up at a finite shear strain (inside C′ bands) of 12–15. Shear band boudins and foliation boudins both record extension parallel to the SZB, as do the occurrence of extensional shear band sets that have conjugate senses of slip. We infer that shear bands nucleated on planes of maximum instantaneous shear strain rate in a shear zone with Wk < 0.8, and perhaps even as low as <0.5. The C′ shear bands near the AF formed in a thinning/stretching shear zone, which had monoclinic symmetry, where the direction of shear-zone stretching was parallel to the shearing direction. 相似文献
4.
Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S X , ranges from 1.06 to 1.48. The minimum stretch, S Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting. 相似文献
5.
Lineations within mylonites exhumed in the hanging wall of New Zealand's active Alpine Fault zone have a complicated relationship to contemporary plate kinematics. The shear zone is triclinic and macroscopic object lineations are not usually parallel to the simple shear direction, despite high total simple shear strains (γ ≥ 150). This is mostly because the lineations are inherited from pre-mylonitic fabrics, and have not been rotated into parallelism with the mylonitic stretching direction (which pitches c. 44° in the fault plane). Furthermore, some lineations have been variably rotated depending on whether they are present in shear bands or microlithons, which accommodated bulk strains with different vorticities. Total strains required to obtain parallelism between the finite maximum principal stretching direction calculated from transpression models and these mylonitic lineations, are pure shear stretch, S1 ∼ 3.5; simple shear 11.7 < γ < 150. The observations and numerical models also show that linear features are not rotated much during simple shear because they initially lie within the shear plane, and that inherited fabric components may not be destroyed until very high simple shear strains have been attained. 相似文献
6.
In metamorphic core complexes it is commonly unclear whether lower plate mylonites formed as the down-dip continuation of a detachment fault, or whether they represent a subhorizontal shear zone that was captured by a more steeply dipping detachment fault. Detailed microstructural, fabric, and strain data from mylonites in the Buckskin-Rawhide metamorphic core complex, west-central Arizona, constrain the structural development of the lower plate shear zone. Widespread exposures of ∼22–21 Ma granitoids of the Swansea Plutonic Suite enable us to separate Miocene strain coeval with core complex extension from older deformation. Mylonites across the lower plate consistently record top-to-the-NE-directed shear. Miocene quartz and feldspar deformation/recrystallization mechanisms indicate ∼450–500 °C mylonitization temperatures that were relatively uniform across a distance of ∼35 km in the extension direction. Quartz dynamically recrystallized grain sizes do not systematically vary in the extension direction. Strain recorded in the Swansea Plutonic Suite is also relatively uniform in the extension direction, which is incompatible with models in which lower plate mylonites form as the ductile root of a major detachment fault. Altogether these data suggest the mylonitic shear zone initiated with a ≤4° dip and was unroofed by a more steeply dipping detachment fault system. Lower plate mylonites in the Buckskin-Rawhide metamorphic core complex thus represent a captured subhorizontal shear zone rather than the down-dip continuation of a detachment fault. 相似文献
7.
Three different series of experiments were carried out with pitch (bitumen) and/or composite pitch-plasticine models to observe the spatial and temporal changes of strain pattern and/or fold styles in a tectonic zone undergoing sinistral-sense unconfined transpression. In the first series, rectangular pitch models with circular strain markers, when subjected to vertically and laterally unconstrained transpression, showed that the circular markers deformed into ellipses with long axes (maximum instantaneous stretching axis: ISAmax) oriented <45° with the plane of simple shear at the onset of deformation. This initial angle decreased with increasing angle of convergence (α = 15°, 30°, 45° and 60°) between the boundary walls. In the second series, a longitudinally pre-cut pitch block simulated a pre-existing fault zone in the crust. Lubrication along the cut was varied to simulate varying ease of fault slip. During oblique convergence, transpressional strain was partitioned between the pre-existing cut (dominantly the simple shear component) and the pitch blocks (mostly the pure shear component). Partitioning was higher for higher lubrication and lower angle of convergence in these experiments, which envisaged interesting observations on the efficiency of natural ‘partitioned transpression’ systems. In series 3, folds in a thin plasticine layer placed over the pitch block initiated parallel to the long axis of the finite strain ellipse in transpression and rotated anticlockwise with increasing strain. 相似文献
8.
《Journal of Structural Geology》1997,19(8):1023-1036
Plane-strain shear zones between rigid walls which do not rotate but which converge and move laterally relative to each other are here-in referred to as convergent shear zones. Analysis of the deformation in convergent shear zones indicates the existence of two flow apophyses, one parallel to the shear zone wall and the other inclined to the wall. Modeling of the development of fabrics in convergent shear zones indicates the occurrence of stable orientations in which S and C′ do not rotate and are oppositely inclined to the shear-zone boundary. The stable C′ orientation is parallel to the inclined flow apophysis and also is parallel to the approach velocity vector of the opposing walls of the shear zone. If it can be demonstrated from field relationships that the walls of a shear zone were rigid and remained parallel, then the occurrence of a flow apophysis inclined in the direction of shear is diagnostic of convergent shear. S and C′ fabrics in the Ridge Road and Gundy Creek shear zones of the southern Appalachian Piedmont are interpreted to indicate a convergent shear regime with an approach velocity vector oriented ~ 10–13 ° clockwise from the strike of the zones. 相似文献
9.
《International Geology Review》2012,54(9):1073-1086
Field studies in the Palaeoproterozoïc Daléma basin, Kédougou-Kéniéba Inlier, reveal that the main tectonic feature comprises alternating large shear zones relatively well-separated by weakly deformed surrounding rock domains. Analysis of the various structures in relation to this major D2 phase of Eburnean deformation indicates partitioning of sinistral transpressive deformation between domains of dominant transcurrent and dominant compressive deformation. Foliation is mostly oblique to subvertical and trending 0–30° N, but locally is subhorizontal in some thrust-motion shear zones. Foliation planes of shear zones contain a superimposed subhorizontal stretching lineation which in places cross-cuts a steeply plunging stretching lineation which is clearly expressed in the metasedimentary rocks of weakly deformed surrounding domains. In the weakly deformed domains, the subhorizontal lineation is absent, whereas the oblique to subvertical lineation is more fully developed. Finite strain analyses of samples from surrounding both weakly deformed and shearing domains, using finite strain ratio and the Fry method, indicate flattened ellipsoid fabrics. However, the orientation of the long axis (X) of the finite strain ellipsoid is horizontal in the shear zones and oblique within the weakly deformed domains. Exceptionally, samples from some thrust zones indicate a finite strain ellipsoid in triaxial constriction fabrics with a subhorizontal long axis (X). In addition, the analysis of the strain orientation starting from semi-ductile and brittle structures indicates that a WNE–ESE (130° N to 110° N) orientation of strain shortening axis occurred during the Eburnean D2 deformation. 相似文献
10.
The NE to ENE trending Mesozoic Xingcheng-Taili ductile shear zone of the northeastern North China Craton was shaped by three phases of deformation. Deformation phase D1 is characterized by a steep, generally E–W striking gneissosity. It was then overprinted by deformation phase D2 with NE-sinistral shear with K-feldspar porphyroclasts forming a subhorizontal low-angle stretching lineation on a steep foliation. During deformation phase D3, lateral motion accommodated by ENE sinistral strike-slip shear zones dominated. Associated fabrics developed at upper greenschist metamorphic facies conditions and show the deformation characteristics of middle- to shallow crustal levels. In some parts, the older structures have been in turn overprinted by late-stage sinistral D3 shearing. Finite strain and kinematic vorticity in all deformed granitic rocks indicate a prolate ellipsoid (L-S tectonites) near plane strain. Simple shear-dominated general shear during D3 deformation is probably of general significance. The quartz c-axis textures indicate prism-gliding with a dominant rhomb <a> slip and basal <a> slip system formed mainly at low-middle temperatures. Mineral deformation behavior, quartz c-axis textures, quartz grain size and the Kruhl thermometer demonstrate that the ductile shear zone developed under greenschist facies metamorphic conditions at deformation temperatures ranging from 400 to 500 °C. Dislocation creep is the main deformation mechanism at a shallow crustal level. Fractal analysis showed that the boundaries of recrystallized quartz grains had statistically self-similarities. Differential stresses deduced from dynamically recrystallized quartz grain size are at around 20–39 MPa, and strain rates in the order of 10−12 to 10−14 s−1. This indicates deformation of granitic rocks in the Xingcheng-Taili ductile shear zone at low strain rates, which is consistent with most other ductile shear zones. Hornblende-plagioclase thermometer and white mica barometer indicate metamorphic conditions of medium pressures at around ca. 3–5 kbar and temperatures of 400–500 °C within greenschist facies conditions. The main D3 deformation of the ENE-trending sinistral strike-slip ductile shearing is related to the roll-back of the subducting Pacific plate beneath the North China Craton. 相似文献
11.
LIANG Chenyue LIU Yongjiang ZHENG Changqing LI Weimin Franz NEUBAUER ZHANG Qian 《《地质学报》英文版》2019,93(5):1477-1499
The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10~(–7.87)s~(–1) and 10~(–11.49)s~(–1) with differential stresses of 32.63–63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing'an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean. 相似文献
12.
The Ghouri area in southwest Iran exposes a cross section through the Zagros orogenic belt. The area provides an opportunity to investigate quantitative finite strain (Rs), kinematic vorticity number (Wk), proportions of pure shear and simple shear components, sense of shear indicators, steeply plunging lineations, and other moderate to steeply plunging stretching lineations in a transpressional zone. Based on a classical strain analysis of deformed microfossils with oblate strain ellipsoid shape, the Zagros orogenic belt is classified as a pure-shear dominated zone of transpression, but asymmetry of shear-sense indicators suggests that a significant component of simple shear was involved along the deformation zone boundaries. The long axes of the microfossils and stretched pebbles of a deformed conglomerate were used to indicate the stretching direction in this zone. The stretching lineations have a steep to moderate plunge but a constant strain magnitude. Characteristics of dextral inclined transpressional kinematics in the Zagros continental collision zone were quantified and indicate an estimated k-value < 1, an angle between the maximum horizontal axis of the instantaneous strain ellipsoid and the zone boundary (θ = 32°), asymmetrical dextral shear-sense indicators, and an angle of relative plate motion (α = 25°). 相似文献
13.
The deformation history of a monophase calcite marble shear zone complex on Thassos Island, Northern Greece, is reconstructed by detailed geometric studies of the textural and microstructural patterns relative to a fixed reference system (shear zone boundary, SZB). Strain localization within the massive marble complex is linked to decreasing P–T conditions during the exhumation process of the metamorphic core complex. Solvus thermometry indicates that temperatures of 300–350°C prevailed during part of the shear zone deformation history. The coarse-grained marble protolith outside the shear zone is characterized by symmetrically oriented twin sets due to early coaxial deformation. A component of heterogeneous non-coaxial deformation is first recorded within the adjacent protomylonite. Enhanced strain weakening by dynamic recrystallization promoted strong localization of plastic deformation in the ultramylonite of the calcite shear zone, where high strain was accommodated by non-coaxial flow. This study demonstrates that both a pure shear and a simple shear strain path can result in similar crystallographic preferred orientations (single c-axis maximum perpendicular to the SZB) by different dominant deformation mechanisms. Separated a-axis pole figures (+a- and −a-axis) show different density distributions with orthorhombic texture symmetry in the protolith marble and monoclinic symmetry in the ultramylonite marble consistently with the observed grain fabric symmetry. 相似文献
14.
Dilip Saha S. Chakraborti V. Tripathy 《Journal of the Geological Society of India》2010,75(1):323-337
Recent works suggest Proterozoic plate convergence along the southeastern margin of India which led to amalgamation of the
high grade Eastern Ghats belt (EGB) and adjoining fold-and-thrust belts to the East Dhrawar craton. Two major thrusts namely
the Vellikonda thrust at the western margin of the Nellore Schist belt (NSB) and the Maidukuru thrust at the western margin
of the Nallamalai fold belt (NFB) accommodate significant upper crustal shortening, which is indicated by juxtaposition of
geological terranes with distinct tectonostratigraphy, varying deformation intensity, structural styles and metamorphic grade.
Kinematic analysis of structures and fabric of the fault zone rocks in these intracontinental thrust zones and the hanging
wall and footwall rocks suggest spatially heterogeneous partitioning of strain into various combinations of E-W shortening,
top-to-west shear on stratum parallel subhorizontal detachments or on easterly dipping thrusts, and a strike slip component.
Although relatively less prominent than the other two components of the strain triangle, non-orthogonal slickenfibres associated with flexural slip folds and mylonitic foliation-stretching lineation orientation
geometry within the arcuate NSB and NFB indicate left lateral strike slip subparallel to the overall N-S trend. On the whole
an inclined transpression is inferred to have controlled the spatially heterogeneous development of thrust related fabric
in the terrane between the Eastern Ghats belt south of the Godavari graben and the East Dharwar craton. 相似文献
15.
The Superior lobe of the Laurentide ice sheet, during its last advance into northwestern Wisconsin, may have moved and transported sediment primarily through deep, widespread shear of its bed to high strains (>100). To study the kinematics of this deformation, we measured the anisotropy of magnetic susceptibility of 3750 intact samples of its basal till—the Douglas member of the Miller Creek formation—collected from eight profiles at 0.2 m depth increments. A benchmark for interpretations was provided by results of ring-shear experiments conducted on the Douglas Till, which provided fabric characteristics for the case of horizontal simple shear. Orientations of maximum susceptibility (k1) were controlled by preferred orientations of silt-sized magnetite grains and were similar to sand-grain orientations measured in thin sections. Strengths of fabrics formed by orientations of k1 indicate that most of the till sampled was deformed but to variable strains. Deformation averaged over the 20 km spanned by the study approximated horizontal simple shear. However, large differences in k1 fabric azimuths (>45°) over lateral distances of meters to tens of meters indicate highly heterogeneous bed deformation, perhaps focused in anastomosing zones with associated divergent and convergent till shear. This interpretation is supported by orientations of principal susceptibilities that imply, in many cases, either that shear planes were steeply dipping, particularly transverse to the shearing direction, or that there were major components of pure shear. Variations in k1 fabric azimuth with depth indicate that most of the till thickness did not shear simultaneously; rather, till accumulated at the bed as shear direction changed in response to temporally shifting zones of shallow deformation (<1 m). This heterogeneous, temporally variable deformation of the bed differs from many applications of the bed-deformation model but is consistent with subglacial measurements at modern glaciers. 相似文献
16.
P–T–t–D record of crustal‐scale horizontal flow and magma‐assisted doming in the SW Mongolian Altai 
下载免费PDF全文
下载免费PDF全文 A. Broussolle P. Štípská J. Lehmann K. Schulmann B. R. Hacker R. Holder A. R. C. Kylander‐Clark P. Hanžl M. Racek P. Hasalová O. Lexa K. Hrdličková D. Buriánek 《Journal of Metamorphic Geology》2015,33(4):359-383
The Chandman massif, a typical structure of the Mongolian Altai, consists of a migmatite–magmatite core rimmed by a lower grade metamorphic envelope of andalusite and cordierite‐bearing schists. The oldest structure in the migmatite–magmatite core is a subhorizontal migmatitic foliation S1 parallel to rare granitoid sills. This fabric is folded by upright folds F2 and transposed into a vertical migmatitic foliation S2 that is syn‐tectonic, with up to several tens of metres thick granitoid sills. Sillimanite–ilmenite–magnetite S1 inclusion trails in garnet constrain the depth of equilibration during the S1 fabric to 6–7 kbar at 710–780 °C. Reorientation of sillimanite into the S2 fabric indicates that the S1–S2 fabric transition occurred in the sillimanite stability field. The presence of cordierite, and garnet rim chemistry point to decompression to 3–4 kbar and 680–750 °C during development of the S2 steep fabric, and post‐tectonic andalusite indicates further decompression to 2–3 kbar and 600–650 °C. Widespread crystallization of post‐tectonic muscovite is explained by the release of H2O from crystallizing partial melt. In the metamorphic envelope the subhorizontal metamorphic schistosity S1 is heterogeneously affected by upright F2 folds and axial planar subvertical cleavage S2. In the north, the inclusion trails in garnet are parallel to the S1 foliation, and the garnet zoning indicates nearly isobaric heating from 2.5 to 3 kbar and 500–530 °C. Cordierite contains crenulated S1 inclusion trails and has pressure shadows related to the formation of the S2 fabric. The switch from the S1 to the S2 foliation occurred near 2.5–3 kbar and 530–570 °C; replacement of cordierite by fine‐grained muscovite and chlorite indicates further retrogression and cooling. In the south, andalusite containing crenulated inclusion trails of ilmenite and magnetite indicates heating during the D2 deformation at 3–4 kbar and 540–620 °C. Monazite from a migmatite analysed by LASS yielded elevated HREE concentrations. The grain with the best‐developed oscillatory zoning is 356 ± 1.0 [±7] Ma (207Pb‐corrected 238U/206Pb), considered to date the crystallization from melt in the cordierite stability ~680 °C and 3.5 kbar, whereas the patchy BSE‐dark domains give a date of 347 ± 4.2 [±7] Ma interpreted as recrystallization at subsolidus conditions. The earliest sub‐horizontal fabric is associated with the onset of magmatism and peak of P–T conditions in the deep crust, indicating important heat input associated with lower crustal horizontal flow. The paroxysmal metamorphic conditions are connected with collapse of the metamorphic structure, an extrusion of the hot lower crustal rocks associated with vertical magma transfer and a juxtaposition of the hot magmatite–migmatite core with supracrustal rocks. This study provides information about tectono‐thermal history and time‐scales of horizontal flow and vertical mass and heat transfer in the Altai orogen. It is shown that, similar to collisional orogens, doming of partially molten rocks assisted by syn‐orogenic magmatism can be responsible for the exhumation of orogenic lower crust in accretionary orogenic systems. 相似文献
17.
The Chañaral tectonic mélange (northern Chile) is a local unit within the late Paleozoic accretionary complex formed at the southwestern margin of Gondwana. The structural characteristics of the studied mélange were mostly developed during a first deformation phase (D1) and include a block-in-matrix fabric, lineations (L1) and foliations (S1), tight to intrafoliar folds, S-C and S-C-C′ composite planar fabrics, and a conspicuous spatial separation of domains with predominantly linear and linear-planar fabrics. Folding during a second stage (D2) modified the orientation of the previous fabrics and structures. The eastern boundary of the Chañaral mélange is N-S to NNW-SSE oriented, moderately dipping to the east. Its western boundary is not exposed. The plane showing the maximum structural asymmetry (the vorticity normal section) is ENE-WSW directed, and sub-vertical. Kinematic criteria consistently reveal top-to-the-WSW displacement. A kinematic model of triclinic transpression with inclined extrusion has been applied to evaluate the D1 structural features of the Chañaral mélange. The pitch of the simple shear direction on the deformation plane ranged from 60°N to 90°. The pitch of the estimated extrusion direction was of 30°-40°S. The coaxial component was clearly constrictional (logarithmic K value of 2 to 5). The vorticity number has not been constrained by the model, but its spatial variation can explain the domainal distribution of the fabrics in the mélange. The simulated particle paths show the predominance of material displacement parallel to the margin, with low to moderate down-dip displacements, which is in accordance with the low-pressure metamorphic assemblages found in the mélange. The convergence direction between the blocks separated by the mélange unit was N50°-60°E. Kinematic blocking of the Chañaral mélange, probably related to the accretion of an oceanic volcanic domain, allowed the D2 folding of the previous structures, a process that, at least initially, proceeded without a change in the convergence direction. 相似文献
18.
《Journal of Structural Geology》2002,24(6-7):1195-1214
Penetrative deformation occurred ca. 70 Ma ago throughout the northern Valhalla complex in Valhalla and Passmore domes and in the Gwillim Creek shear zone, exposed at the deepest structural levels in both domes. Intense strain (ST) in the Gwillim Creek shear zone (domain II) was synchronous with and outlasted deformation (D2) throughout the northern complex (domain I). Upper-amphibolite facies peak mineral assemblages define the predominant foliation. Temperature and pressure results, determined from microdomains with established relationships to reaction textures and microstructures, provide constraints on conditions under which deformation occurred. Deformation was synchronous with and outlasted peak metamorphic conditions at all structural levels. Peak conditions of 825°C and 730 MPa and 850°C and 840 MPa were determined for domains I and II, respectively. This was followed by cooling and retrograde garnet breakdown at conditions of 715°C and 490 MPa and 765°C and 730 MPa in domains I and II, respectively. The faster cooling rate per kilometer of exhumation for domain II relative to domain I is consistent with a model of conductive cooling via thrusting of domain II on to a cold footwall. Metamorphism is interpreted to have resulted from crustal thickening and burial to depths of ca. 25 km based on an inferred clockwise P–T path and the paucity of Late Cretaceous intrusions. Lack of retrograde metamorphism throughout the complex and the high degree of annealing of microstructures indicates that the rocks remained above greenschist-facies conditions until they were exhumed in the Early Tertiary on the Valkyr–Slocan Lake extensional shear zone system.Previous workers have determined that the peak of metamorphism occurred at 72–67 Ma in a restricted locality in the core of Passmore dome, near Vallican. Our study links this dated metamorphism with the structural evolution and metamorphic history throughout the area, and shows that supracrustal rocks at all structural levels in Valhalla and Passmore domes underwent the same metamorphic and deformation event as those near Vallican. Therefore, we assign a ca. 70 Ma age to the penetrative, high-temperature deformation in northern Valhalla complex and the Gwillim Creek shear zone. This coincides with a major period of shortening in the Rocky Mountains of the Foreland belt. Strain in northern Valhalla complex may represent a local transient shear zone that accommodated crustal thickening in the hinterland during orogen-scale compression, or it may be an exhumed part of the basal detachment of the Rocky Mountains. 相似文献
19.
Kinematic analysis and field mapping of the Homestake shear zone (HSZ) and Slide Lake shear zone (SLSZ) in central Colorado may provide insight into the interaction between subvertical and low-angle shear zones in the middle crust. The northeast-striking, steeply dipping HSZ comprises a ∼10-km-wide set of anastomosing ductile shear zones and pseudotachylyte-bearing faults. Approximately 4 km south of the HSZ, north–northeast-striking, shallowly dipping mylonites of the SLSZ form three 1–10-m-thick splays. Oblique stretching lineations and shear sense in both shear zones record components of dip-slip (top-up-to-the-northwest and top-down-to-the-southeast) and dextral strike-slip movement during mylonite development. Quartz and feldspar deformation mechanisms and quartz [c] axis lattice preferred orientation (LPO) patterns suggest deformation temperatures ranging from ∼280–500 °C in the HSZ to ∼280–600 °C in the SLSZ. Quartz [c] axis LPOs suggest plane strain general shear across the shear system. Based on the relative timing of fabric development, compatible kinematics and similar deformation temperatures in the SLSZ and the HSZ, we propose that both shear zones formed during strain localization and partitioning within a transpressional shear zone system that involved subvertical shuffling in the mid-crust at 1.4 Ga. 相似文献
20.
Transpression 总被引：2，自引：0，他引：2
Transpression is considered as a wrench or transcurrent shear accompanied by horizontal shortening across, and vertical lengthening along, the shear plane. A model for the strain in transpression is derived, from which the shape and orientation of the finite strain ellipsoid, and the stretch and rotation of lines can be determined. Shortening across the zone of transpression leads to oblate finite strain ellipsoids (k<1).By considering the superposition of small increments of strain various model deformation paths are computed. These are used to interpret the development of structures, such as en-échelon folds, in transpression zones. The incremental strain ellipsoid allows prediction of the orientation of the principal stresses and hence brittle structures within such zones. The model is also applied to bends and terminations of shear zones and used to interpret the observed patterns of folds and fractures in these. 相似文献