首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
We resolve the anisotropy of magnetic susceptibility (AMS) axes along fault planes, cores and damage zones in rocks that crop out next to the Dead Sea Transform (DST) plate boundary. We measured 261 samples of mainly diamagnetic dolostones that were collected from 15 stations. To test the possible effect of the iron content on the AMS we analyzed the Fe concentrations of the samples in different rock phases. Dolostones with mean magnetic susceptibility value lower than −4 × 10−6 SI and iron content less than ∼1000 ppm are suitable for diamagnetic AMS-based strain analysis. The dolostones along fault planes display AMS fabrics that significantly deviate from the primary “sedimentary fabric”. The characteristics of these fabrics include well-grouped, sub-horizontal, minimum principal AMS axes (k3) and sub-vertical magnetic foliations commonly defined by maximum and intermediate principal AMS axes (k1 and k2 axes, respectively). These fabrics are distinctive along fault planes located tens of kilometers apart, with strikes ranging between NNW-SSE and NNE-SSW and different senses of motion. The obtained magnetic foliations (k1–k2) are sub-parallel (within ∼20°) to the fault planes. Based on rock magnetic and geochemical analyses, we interpret the AMS fabrics as the product of both shape and crystallographic anisotropy of the dolostones. Preferred shape alignment evolves due to mechanical rotation of subordinate particles and rock fragments at the fault core. Preferred crystallographic orientation results from elevated frictional heating (>300 °C) during faulting, which enhances c-axes alignment in the cement-supported dolomite breccia due to crystal-plastic processes. The penetrative deformation within fault zones resulted from the local, fault-related strain field and does not reflect the regional strain field. The analyzed AMS fabrics together with fault-plane kinematics provide valuable information on faulting characteristics in the uppermost crust.  相似文献   

2.
Granulite from 66 sites along the Além-Paraiba dextral shear zone were collected for magnetic analyses. The rocks were affected by the Braziliano orogeny, which was responsible for the present structural pattern. Magnetic fabrics were determined applying anisotropy of low—field magnetic susceptibility (AMS, all sites) and anisotropy of remanence magnetization (ARM, in 21 sites). The ferromagnetic minerals are magnetite, titanohematite, and in some samples, minor pyrrhotite. Hysteresis curves show that both para— and ferromagnetic minerals are the carriers of AMS. Thus AMS is due to the preferred crystallographic orientation of paramagnetic matrix minerals and titanohematite, to the shape anisotropy of magnetite grains, or to a combination of all three. ARM was performed imposing both anhysteretic remanence (AAR) and isothermal remanence (AIRM). The AMS, AAR, and AIRM fabrics are coaxial and are tectonic in origin. Their parallelism indicates that both ferromagnetic and paramagnetic minerals recorded the same metamorphic event. A passive—marker model is suggested for ferromagnetic minerals at the outcrop scale. The magnetic foliation is very close to the strike of the Além Paraíba shear zone, suggesting that this generated the local rock fabrics during the Braziliano orogeny.  相似文献   

3.
Sakhalin has been affected by several phases of Cretaceous and Tertiary deformation due to the complex interaction of plates in the northwest Pacific region. A detailed understanding of the strain is important because it will provide constraints on plate-scale processes that control the formation and deformation of marginal sedimentary basins. Anisotropy of magnetic susceptibility (AMS) data were obtained from fine-grained mudstones and siltstones from 22 localities in Sakhalin in order to provide information concerning tectonic strain. AMS data reliably record ancient strain tensor orientations before significant deformation of the sediments occurred. Paleomagnetically determined vertical-axis rotations of crustal rocks allow rotation of the fabrics back to their original orientation. Results from southwest Sakhalin indicate a N035°E-directed net tectonic transport from the mid-Paleocene to the early Miocene, which is consistent with the present-day relative motion between the Okhotsk Sea and Eurasian plates. Reconstruction of early–late Miocene AMS fabrics in east Sakhalin indicates a tectonic transport direction of N040°E. In west Sakhalin, the transport direction appears to have remained relatively consistent from the Oligocene to the late Miocene, but it has a different attitude of N080°E. This suggests local deflection of the stress and strain fields, which was probably associated with opening of the northern Tatar Strait. A northward-directed tectonic transport is observed in Miocene sediments in southeast Sakhalin, mid-Eocene sediments in east Sakhalin, and in Late Cretaceous rocks of west and northern Sakhalin, which may be associated with northwestward motion and subduction of the Pacific Plate in the Tertiary period. The boundaries of the separate regions defined by the AMS data are consistent with present-day plate models and, therefore, provide meaningful constraints on the tectonic evolution of Sakhalin.  相似文献   

4.
Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10−3 (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR0–30, pAAR30–60 and pAAR60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of Kmax inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (Kmax<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.  相似文献   

5.
Herein we report on the results of an anisotropy of magnetic susceptibility (AMS) fabric case‐study of two Late Weichselian tills exposed in a bedrock quarry in Dalby, Skåne, southern Sweden. The region possesses a complex glacial history, reflecting alternating and interacting advances of the main body of the Scandinavian Ice Sheet (SIS) and its ice lobes from the Baltic basin, perhaps driven by streaming ice. AMS till fabrics are robust indicators of ice‐flow history and till kinematics, and provide a unique tool to investigate till kinematics within and amongst till units. The till section investigated here contains ~8 m of the Dalby Till – a dark grey silt‐clay rich till deposited during one or more Baltic advance – overlain by ~1.5 m of the regional surface diamicton. AMS fabrics within the lower part of the Dalby Till conform to the regional surface fluting, and reflect sustained flow from the ENE with progressive increases in basal strain. A boulder‐rich horizon approximately 3 m from the base of the till marks a restricted excursion in till fabric direction, fabric strength and style of strain. Ice flow is from the SW and W in the upper section. We interpret these fabrics to record shifting ice flow and bed conditions at the margins of the Young Baltic Advance ice lobe in southern Sweden, prior to a short‐lived re‐advance of the main body of the SIS over mainland Sweden recorded by the surface diamicton.  相似文献   

6.
Orogenic compression-related fabrics (~340–335 Ma) were reworked during regional extensional deformation (~328–325 Ma) in a large anatectic crustal domain of the Central Vosges (NE France). The extension was first accommodated by brittle dilation affecting vertically anisotropic high-grade rocks associated with emplacement of subvertical granitic sheets. The AMS fabric of granitoids is consistent with highly partitioned transtensional deformation marked by alternations of flat and steep foliations and development of orthogonal lineations. This deformation passes to top-to-the-southwest ductile shearing expressed in southerly migmatitic middle crust. The AMS fabric revealed moderately west-dipping foliations bearing subhorizontal NNW–SSE-trending lineations and predominantly plane strain to prolate shapes. This fabric pattern is interpreted as a viscous response of stretched partially molten crust during continuous ductile extension. Vertical ascent of voluminous granites and stoping of the upper crust occurs further south. This gravity ascent triggered by extension leads to development of south-dipping AMS foliations, south-plunging lineations and oblate fabrics in various crustal granites. Vertical shortening related to ascent of these (~325 Ma) granitoids and persistent N–S stretching is responsible for reworking and remelting of originally vertical compression-related fabric in roof supracrustal granites (~340 Ma) and development of highly prolate fabrics in these rocks. This work shows that the finite shape of AMS fabric ellipsoid is highly sensitive to both strain regime and superpositions of orthogonal deformation events.  相似文献   

7.
Magnetic measurements were performed on apparently undeformed limestones and carbonate shales from 44 sites in nearly horizontal stratigraphic layers mainly from the basal units of the Neoproterozoic Bambui Group in the southern part of the São Francisco Basin. Rock magnetism, cathodoluminescence, transmitted and reflected light microscopy analyses reveal that there is a mix of ferromagnetic minerals, mainly magnetite and pyrrhotite, in most sites. In some sites, however, the ferromagnetic minerals are magnetite and hematite. Fine-grained pyrrhotite and pyrite accompany rare fine-grained graphite and probably amorphous carbon in some of stylolites, while pyrrhotite is also present as larger interstitial masses in coarse-grained domains outside, but close to the stylolites. Magnetic fabrics were determined applying both anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of anhysteretic remanence magnetization (AAR). The AAR tensor was less well defined than the AMS fabric due to the low ferromagnetic mineral content. The analysis at the individual-site scale defines three AMS fabric types. The first type (two sites) shows Kmin perpendicular to the bedding plane, while Kmax and Kint are scattered within bedding plane itself. This fabric is usually interpreted as primary (sedimentary-compactional), typical of totally undeformed sediments. The second type shows the three well-clustered AMS axes with Kmin still perpendicular to the bedding plane. This fabric is the most important since it was found in the majority of the sites. The third type (two sites) is characterized by well-clustered Kmax in the bedding plane, while Kmin and Kint are distributed along a girdle. The second and third fabric types are interpreted as combinations of sedimentary-compactional and tectonic contributions at the earliest, and at a slightly later stage of deformation, respectively. AMS represents the contribution of all the rock-forming minerals, while AAR isolates the contribution of remanence-bearing minerals from the matrix minerals. However, rock magnetism shown that anhysteretic remanence only reaches grains with coercivity < 100 mT because the maximum AF in the majority of the available instruments is 100 mT. Therefore, hematite and pyrrhotite probably do not contribute to AAR, which is due to the shape-preferred orientation of magnetite grains. For some sites, the AMS and AAR fabric orientations are different, mainly with respect to the lineation orientations (Kmax and Amax, respectively). In general, Kmax is well developed and follows the trend of the main regional thrusts, fold axes and faults generated in the first deformational phase, while Amax follows both this trend and that of structural lineaments formed during the second deformational phase. These deformation phases arose from the compression, which occurred during the evolution of the Brasília fold belt during the last stages of the Brasiliano event. The magnetic fabrics of the apparently undeformed Bambui limestones are typical of very weakly deformed sediments, in which the depositional-compaction fabric has been partly overprinted by a tectonic one, with minimum susceptibility direction remaining perpendicular to bedding. This result is in agreement with the textures given by the petrographic observations.  相似文献   

8.
Anisotropy of magnetic susceptibility (AMS) in micaceous quartzites with mean susceptibility (K m) >50 × 10−6 SI units is known to be on account of the orientation distribution of the para/ferromagnetic minerals (e.g. micas, magnetite), which comprise the minor phase in the rocks. However, the strain in such deformed micaceous quartzites is dominantly accommodated by the quartz grains, which are the major phase in them. The objective of this paper is to explore the extent to which AMS data from micaceous quartzites provide information about the shape of the strain ellipsoid. AMS analysis of 3 quartzite blocks is performed, and the shape of the AMS ellipsoid is recorded to be oblate. From AMS data, the three principal planes of the AMS ellipsoid are identified in each block and thin sections are prepared along them. Quartz grain shape (aspect ratio, R q), intensity of quartz and mica shape preferred orientation (κq and κmi, respectively) and 2D strain (E) recorded by quartz are measured in each section. R q, κq, κmi and E are all noted to be minimum in the section parallel to the magnetic foliation plane as compared to the other two sections. This indicates that the quartz grains have oblate shapes in 3D and accommodated flattening strain, which is similar to the shape of the AMS ellipsoid. The role of mica in causing Zener drag and pinning of quartz grain boundaries is discussed. It is concluded that during progressive deformation, migration of pinned grain boundaries is inhibited. This causes enhanced recrystallization at the grain boundaries adjacent to the pinned ones, thus guiding the shape modification of quartz grains. A strong correlation is demonstrated between κq and κmi as well as κmi and E. It is inferred that fabric evolution of quartz was controlled by mica. Hence, the shape of the AMS ellipsoid, which is on account of mica, provides information about shape of the strain ellipsoid.  相似文献   

9.
Anisotropy of magnetic susceptibility (AMS) applied to an alkaline granite from Meruoca (NE Brazil) recorded weak anisotropies, typically below 4%, and a considerable dispersion of the AMS axes. Red-clouded feldspars and clots of metasomatic minerals enclosed in magmatic crystals indicate that hydrothermal fluids altered the granite. U–Pb isotopic data show high-common Pb on zircons but allowed the calculation of a mean SHRIMP age of 523 ± 9 Ma attributed to the magmatic crystallization. Growth of fine oxides by late fluid–rock interactions was responsible for the scattering of AMS. Rock magnetic data indicate they consist mainly of an oxidized magnetite and (titano)hematite. Shape preferred orientation of mafic aggregates measured in granite quarries shows that the pluton preserves a gently dipping magmatic foliation. AMS in some quarries with a well-defined magmatic fabric, however, remains highly dispersed. When AMS mimics the mafic shape fabric, only magnetic foliations share a common orientation. Locally, AMS grounded in coarse Ti-poor magnetite associated with titanite develops a consistent subhorizontal oblate fabric that agrees with tectonic models suggesting that the cupola of the pluton has been exposed by erosion.  相似文献   

10.
Gentoso, M. J., Evenson, E. B., Kodama, K. P., Iverson, N. R., Alley, R. B., Berti, C. & Kozlowski, A. 2012 (January): Exploring till bed kinematics using AMS magnetic fabrics and pebble fabrics: the Weedsport drumlin field, New York State, USA. Boreas, Vol. 41, pp. 31–41. 10.1111/j.1502‐3885.2011.00221.x. ISSN 0300‐9483. Thick, relatively homogeneous basal tills exposed in the drumlins and flutes of the Weedsport drumlin and flute field in New York State exhibit anisotropy of magnetic susceptibility (AMS) and pebble fabrics that are consistently oriented parallel to the streamlined bedforms. The pebble fabrics and AMS fabrics are concordant. In this study, six drumlins and five flutes were sampled. Thermally induced, incremental reduction of isothermal remanent magnetization indicates that AMS is caused by primarily elongate maghaemite grains. The orientations of principal axes of maximum susceptibility (k1) are generally parallel to pebble long‐axis orientations, and tend to plunge mildly up‐glacier. Fabric directions are generally parallel to drumlin long‐axis orientations, but deviate by 12°–23° from flute directions. Fabrics of the flutes are stronger and more unidirectional than those of the drumlins. These results support the use of AMS as a fast and objective method for characterizing fabrics in tills, and suggest hypotheses about basal processes linked to glacially streamlined landforms.  相似文献   

11.
The footwall of the Main Central Thrust (MCT) Zone along the Bhagirathi valley comprises a wide zone of mylonitic quartzite and deep-level tectonites. The systematic variation of finite strain parameters (Es, k and v) in the mylonites indicates heterogeneous deformation, which is determined to vary between, simple shear and non-coaxial flattening type. In such a strain regime the outer boundary of the quartz clasts are no longer preserved thus leading to an error in finite strain measurement.In order to supplement the finite strain studies, Anisotropy of Magnetic Susceptibility (AMS) analyses were carried out on the mylonitic quartzites. A systematic variation in degree of anisotropy (P′) with distance from the MCT is documented and is interpreted to be tectonic in origin. Based on these results it is concluded that P′ can be used as a strain-intensity gauge at least on an outcrop scale, where a systematic variation in P′ values from one part of the outcrop to the other can be established. However, the quantitative relation between principal axes of finite strain ellipsoid and AMS axes, magnitude of principal susceptibility difference (ΔK1 and ΔK3) and finite strain magnitude (ε1=ln 1 + e1 and ε3=ln 1 + e3) were related by a logarithmic relationship with a correlation coefficient of 0.844.  相似文献   

12.
Magnetic fabric and rock magnetism studies were performed on three mafic dike swarms (total of 38 dikes) from the southernmost part of the São Francisco Craton (SFC) (Minas Gerais State, SE Brazil). They cut Archaean granite–gneiss–migmatite and paleoprototerozoic terranes. These swarms are classified as basic–noritic (Sm–Nd age  2.65 Ga), basic (Rb–Sr age  1.87 Ga) and metamorphic (Rb–Sr age  1.87 Ga) suites, in which the second is the most important. Magnetic fabrics were determined by applying both anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of anhysteretic remanent magnetization (AARM). In most sites magnetic susceptibility is dominantly carried by ferromagnetic minerals, however, in some sites the paramagnetic contribution exceeds 70% of bulk susceptibility. Mainly coarse to fine-grained Ti-poor titanomagnetite up to pure magnetite carry the magnetic fabrics.Three primary AMS fabrics are recognized which are all coaxial with the AARM fabric. Normal AMS fabric is dominant in the basic suite (16 of 20 analyzed dikes) and occurs in 4 and 3 dikes from the basic–noritic and metamorphic suites, respectively. This fabric is interpreted as a result of magma flow in which the analysis of Kmax inclination permitted to infer that the majority of dikes were fed by inclined flows (30° < Kmax < 60°), although 44% of dikes from the basic suite were fed by horizontal or sub-horizontal flows (Kmax < 30°). Intermediate AMS fabric was found in 50% of dikes from the basic–noritic and metamorphic suites, but in only 2 dikes from the basic suite. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. Inverse AMS fabric is a minority (2 dikes from each suite). The parallelism between AMS and AARM tensors for dikes with abnormal fabrics suggests a primary origin for them. Gyroremanent magnetization (GRM) effect was negligible for the majority of dikes, but it was found in two dikes from the basic suite with normal AMS fabric.Magnetic fabrics recognized for the three studied swarms do not depend on magnetic mineralogy, geochemical composition, dike strikes, nor the age of the swarms since the same magnetic minerals and magnetic fabric types are found in dikes from all suites. Inclined and horizontal flows allow us to infer the relative position of at least three magma sources (or magma chambers) from which the dikes were fed.  相似文献   

13.
The Ardara pluton as part of the Donegal batholith was intruded into Neoproterozoic metasediments and metadolerites at mid-crustal levels. The emplacement mechanism of the Ardara granite is very controversial, and mechanisms ranging from diapirism, ballooning and stoping followed by nested diapirism have been proposed. Magnetic fabrics, rock fabrics and K/Ar dating of micas are used here to constrain the emplacement history. The compositional zoning of the Ardara pluton is clearly reflected in the different bulk magnetic susceptibilities between the outer quartz monzodiorite and the central granodiorite, whereas the intervening tonalite is of intermediate nature. The magnetic carriers are characterized by the anisotropy of the magnetic susceptibility (AMS), thermomagnetic measurements and through high field analyses (HFA). The separation of the ferrimagnetic and paramagnetic contributions revealed that biotite and magnetite control the AMS in the quartz monzodiorite. Both minerals are oriented in such a way that their summed contribution is constructive and originates from the shape fabric of magnetite and the texture of biotite. Biotite is responsible mainly for the AMS in the tonalite and granodiorite. The magnetic foliation can be directly related to the macroscopic foliation and also to the D4 structures in the country rocks. The foliation is consistent with the geometry of the roughly circular shape and has a mostly steep to vertical dip. Towards the central granodiorite the magnetic foliation dies out, although plagioclase texture measurements indicate a weak magmatic shape fabric. With the exception of the tail, the Kmax axes (magnetic lineation) vary from steeply to gently plunging. The so-called lineation factor is approximately 1.01 and therefore points to a less significant axial symmetry. These observations coincide with strain estimates on mafic enclaves that show a very consistent pattern of K ∼0 flattening strain. Texture analyses of biotite and quartz additionally support the observations made by the strain analyses and the magnetic fabric data. Microstructural investigations give evidence that the fabrics are associated with the emplacement over a range of temperatures from truly magmatic to high-temperature solid-state conditions. The age of the intrusion is still under discussion, but a new cooling age was determined by K/Ar dating of biotite at 403.7±8 Ma corresponding to a temperature range between 450 and 300°C. For a mylonite along the southern contact between the Ardara pluton and the country rock a K/Ar muscovite age of 378.8±7 Ma indicates a minimum age for the shear zone when the Ardara pluton must have already been cooled down below 350±50°C. Received: 28 January 1999 / Accepted: 28 December 1999  相似文献   

14.
Dikes of the eastern Troodos ophiolite of Cyprus intruded at slow ocean-spreading axes with dips ranging up to 15° from vertical and with bimodal strikes (now NE–SW and N–S due to post-88 Ma sinistral microplate rotation). Varied dike orientations may represent local stress fields during dike-crack propagation but do not influence the spatial-distributions or orientation-distributions of dikes' magnetic fabrics, nor of their palaeomagnetic signals. Anisotropy of magnetic susceptibility (AMS) integrates mineral orientation-distributions from each of 1289 specimens sampled from dikes at 356 sites over 400 km2 in the eastern Troodos ophiolite of Cyprus. In 90% of dikes, AMS fabrics define a foliation (kMAX–kINT) parallel to dike walls and a lineation (kMAX) that varies regionally and systematically. Magma-flow alignment of accessory magnetite controls the AMS with a subordinate contribution from the mafic silicate matrix that is reduced in anisotropy by sea-floor metamorphism. Titanomagnetite has less influence on anisotropy. Occasionally, intermediate and minimum susceptibility axes are switched so as to be incompatible with the kinematically reasonable flow plane but maximum susceptibility (kMAX) still defines the magmatic flow axis. Such blended subfabrics of kinematically compatible mafic-silicate and misaligned multidomain magnetite subfabrics; are rare. Areas of steep magma flow (kMAX plunge ≥ 70°) and of shallow magma-flow alternate in a systematic and gradual spatial pattern. Foci of steep flow were spaced 4 km parallel to the spreading axes and 6 km perpendicular to the spreading axes. Ridge-parallel separation of steep flow suggest the spacing of magma-feeders to the dikes whereas ridge-perpendicular spacing of 6 km at a spreading rate of 50 mm/a implies the magma sources may have been active for 240 Ka. The magma feeders feeding dikes may have been ≤ 2 km in diameter. Stable paleomagnetic vectors, in some cases verified by reversal tests, are retained by magnetite and titanomagnetite. In all specimens, the stable components were isolated by three cycles of low-temperature demagnetization (LTD) followed by ≥ 10 steps of incremental thermal demagnetization (TD). 47% of primary A-components [338.2 /+ 57.2 n = 207, α95 = 3.9; mean TUB = 397 ± 8 °C] are overprinted by a B-component [341.4 /+ 63.5, n = 96, α95 = 8.7; mean TUB = 182 ± 11 °C]. A- and B-components are ubiquitous and shared equally by the N–S and NE–SW striking dikes. A-component unblocking temperatures (TUB) are zoned subparallel to the fossil spreading axis. Their spatial pattern is consistent with chemical remagnetization at some certain off-axis distance determined by sea-floor spreading. A-components indicate less microplate rotation and more northerly palaeolatitudes that are consistent with metamorphic remagnetization after some spreading from the ridge-axis. Thus, their magnetizations are younger than those of the overlying volcanic sequence for which ChRMs are commonly reported as 274 /+ 33 (88 Ma).  相似文献   

15.
Anisotropy of Magnetic Susceptibility (AMS) as a tool has been explored here to investigate the nature of petrofabrics in Deccan Volcanic Province (DVP) of west-central Indian region by representative sampling in typical pahoehoe and rubbly pahoehoe lava flows, dykes within flows, shear zone and the impact crater units. The rock magnetic analysis indicate varying degree of concentration of titanomagnetite compositions dominated by multi domain (MD) to pseudo single domain (PSD) grains favoring shape anisotropy of minerals that form primary fabrics. The pahoehoe type lava flows shows planar oblate fabrics without any preferred orientation of principle susceptibility axis (K1) depicting crystal settling (of magnetic grains) as chief mechanism of fabric development. The rubbly pahoehoe type lava flow exhibit prolate fabrics with well clustered maximum susceptibility axis within horizontal to sub-horizontal planes depicting their response to viscosity shear. The dykes show well clustered K1 parallel to it’s plane locked during rapid contractional cooling. The sampling at Lonar impact crater was unable to trace any clear fabric due to impact/shock induced deformation and rather preserve the primary fabrics. Further, the shear zone depict random fabrics demanding more detailed and systematic sampling in both the cases. The present investigation infer that the magnetic mineralogy and magnetic fabric variations in the DVP are controlled by the flow mechanism and style of cooling that is characteristic of the given flow unit or dyke and any secondary or superimposed fabric needs to be examined by critical sampling strategy. While more detailed attempts are required to establish the AMS as a tool to record various aspects including the flow dynamics and rate of effusion in the vast terrain of DVP; the present approach is useful to characterize and correlate the lava flow units and dyke occurrences.  相似文献   

16.
Anisotropy of magnetic susceptibility (AMS) data are used as a tool to determine strain variations in different parts of the Banded Iron Formations (BIFs) of the Bonai Synclinorium, eastern India. AMS data of 88 cylindrical cores drilled from 29 samples collected from the limb and hinge parts of mesoscopic scale folds as well as different parts of the entire synclinorium are presented. It is found that the samples from limbs of small-scale folds and also from limbs of the regional scale synclinorium have higher degrees of anisotropy than the hinges. This is inferred to indicate that the limbs accommodated higher strain than the hinges. AMS orientation data are analysed in conjunction with field data. It is concluded that the magnetic fabric developed in the limbs as well as hinges of the BIFs of the study area is related to deformation and is not a manifestation of sedimentary fabric.  相似文献   

17.
The shallow intrusive bodies and lava flows emplaced within the Permian upper red unit in the Anayet Massif, represent a magmatic episode that occurred about 255 Ma (Saxonian) in the Pyrenean Axial Zone (northern Spain). Anisotropy of magnetic susceptibility (AMS) measurements, in both igneous bodies and their host rocks, allow us to infer the existence of magnetic fabrics of tectonic origin linked to the main cleavage-related folding episode. The relationship between the susceptibility axes and the field structures is the criterion that permits to differentiate normal from inverse magnetic fabrics in the igneous samples. The structural interpretation of all AMS data taken from the igneous bodies and sedimentary host rocks, is in accordance with a folding model which include: (i) flattening associated with cleavage formation during fold amplification in incompetent layers (host pelites), responsible for a magnetic lineation at high angles with respect to the regional folding axis and (ii) buckling in competent (conglomerates and igneous bodies) levels, responsible for a magnetic lineation parallel to the regional fold axes.  相似文献   

18.
http://www.sciencedirect.com/science/article/pii/S1674987112000618   总被引：1，自引：0，他引：1  
The Moyar Shear Zone(MSZ) of the South Indian granulite terrain hosts a prominent syenite pluton (～560 Ma) and associated NW-SE to NE-SW trending mafic dyke swarm(～65 Ma and 95 Ma). Preliminary magnetic fabric studies in the mafic dykes,using Anisotropy of Magnetic Susceptibly(AMS) studies at low-field,indicate successive emplacement and variable magma flow direction.Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites,indicating shear zone guided emplacement.Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated.The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear.Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.  相似文献   

19.
川西盐井沟断层传播褶皱的三维构造建模与磁组构分析   总被引：2，自引：0，他引：2  
当前断层相关褶皱研究的发展方向是从二维向三维的转换。文中基于Arcgis、Discovery以及Gocad等三维软件平台,对川西盐井沟地区地震资料进行精细的解析,得出盐井沟背斜是一个典型的三剪断层传播褶皱,并建立了它的三维模型。同时考虑到单纯符合几何约束的构造解释普遍存在着多解性和不确定性,结合几何学的三维建模和动力学的有限应变分析研究断层相关褶皱。在川西盐井沟地区18个采样点钻取了184块定向岩心样品,通过磁组构的分析结果发现,盐井沟地区的磁组构基本上都是弱应变的初始变形组构,褶皱前翼应变强度比后翼略强。断层传播褶皱三剪带是有限应变最为集中的区域,在模型预测的三剪带内,磁组构反映的有限应变也较为强烈。磁组构所指示的构造应力场大致为NW-SE向挤压缩短,与断层相关褶皱的几何学与运动学模型的预测相一致。  相似文献   

20.
A combined magnetic fabric and paleomagnetic study has been carried out on the siliciclastic rocks gathered from a stratigraphic cross-section through the Nanpanjiang Basin, South China, in an attempt to extract the paleoflow information preserved in and, thus, constrain the possible origins of these clastic rocks. The sediments used for this study were formed by sediment-gravity flows along the southern margin of the South China block in the Middle Triassic time (ca. 245–228 Ma). The results show a normal distribution of both low field magnetic susceptibility values and natural remanent magnetization intensities, which along with the monotonic detrital framework mode, mainly comprising quartz and lithic particles, may suggest a single provenance involved in deposition of these clastic deposits. Anisotropy of magnetic susceptibility (AMS) analysis acquires primarily the sedimentary magnetic fabrics, which, in this study, reveal paleoflow directions ranging from NNW to ENE with an overall mean orientation of NE. Demagnetization on a part of samples isolates a characteristic remanent component averaged at D = 44.8°, I = 16.9°, κ = 9.7, α95 = 6. 5°, n = 55, corresponding to a paleolatitude N8.6° and a clockwise rotation of ca. 45° since the Middle Triassic for the studied cross-section. This mean direction passes fold tests and is consistent with the reference direction expected from the South China block at the 95% confidence level. Restoring this ∼45° declination renders an overall northward paleoflow, which, combined with other evidence, suggests a southern provenance for these sediments during deposition in the Middle Triassic time. In terms of the early Mesozoic plate framework of southeastern Asia, a tectonic scenario is proposed here, whereby the nearly N–S convergence of the Indochina and South China blocks and its related Indosinian orogeny in the Middle Triassic caused the formation of the Nanpanjiang foreland basin, which was filled by voluminous detritus shed from the uplifted orogenic belt on its southern side.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号