首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 892 毫秒
1.
The Espinho Branco anatexite, located within a transcurrent, high-temperature shear zone in NE Brazil, was the subject of a comprehensive petrostructural study (Anisotropy of Magnetic Susceptibility – AMS, Anisotropy of Anhysteretic Remanence – AAR, Electron Backscatter Diffraction – EBSD) to evaluate the compatibility of different fabrics with the kinematics of melt deformation. Magnetite dominates susceptibilities larger than 1 mSI and biotite displays [001] lattice directions consistent with AMS k3 axes. In contrast, migmatites with a susceptibility lower than 0.5 mSI and no visible mesoscopic foliation provide crystallographic fabrics distinct from AMS and AAR. However, AAR remains consistent with the regional strain field. These results suggest that the correlation of field, AMS and crystallographic fabrics is not always straightforward despite the relatively simple organisation of the magnetic fabric in the anatexite. We conclude that AMS recorded the final stages of the strain field in the migmatite irrespective of its complex mesoscale structures and contrasting crystallographic fabrics.  相似文献   

2.
The Vado di Corno Fault Zone (VCFZ) is an active extensional fault cutting through carbonates in the Italian Central Apennines. The fault zone was exhumed from ∼2 km depth and accommodated a normal throw of ∼2 km since Early-Pleistocene. In the studied area, the master fault of the VCFZ dips N210/54° and juxtaposes Quaternary colluvial deposits in the hangingwall with cataclastic dolostones in the footwall. Detailed mapping of the fault zone rocks within the ∼300 m thick footwall-block evidenced the presence of five main structural units (Low Strain Damage Zone, High Strain Damage Zone, Breccia Unit, Cataclastic Unit 1 and Cataclastic Unit 2). The Breccia Unit results from the Pleistocene extensional reactivation of a pre-existing Pliocene thrust. The Cataclastic Unit 1 forms a ∼40 m thick band lining the master fault and recording in-situ shattering due to the propagation of multiple seismic ruptures. Seismic faulting is suggested also by the occurrence of mirror-like slip surfaces, highly localized sheared calcite-bearing veins and fluidized cataclasites. The VCFZ architecture compares well with seismological studies of the L'Aquila 2009 seismic sequence (mainshock MW 6.1), which imaged the reactivation of shallow-seated low-angle normal faults (Breccia Unit) cut by major high-angle normal faults (Cataclastic Units).  相似文献   

3.
Oriented samples of sediments from Ariyalur Group, Cauvery Basin, south India, were studied for low field anisotropy of magnetic susceptibility (AMS) measurements to unravel the magnetic fabrics and paleocurrent directions. The results of AMS parameters of the sediments indicate primary depositional fabrics for Sillakkudi, Ottakovil and Kallamedu sandstone formations and secondary fabric for Kallankurichchi limestone formation. The obtained low degree of anisotropy (P j ), oblate shape AMS ellipsoid and distribution of maximum (K 1) and minimum (K 3) susceptibility axes on equal area projection confirm the primary sedimentary fabric for Sillakkudi, Ottakovil and Kallamedu Formations. In the case of ferruginous, lower arenaceous, Gryphaea limestone and upper arenaceous limestone beds of Kallankurichchi Formation have recorded more than one fabric. The observed AMS parameters like shape factor (T) (prolate to oblate), q value and random distribution of minimum (K 3) and maximum (K 1) susceptibility axes are supported for secondary fabrics in Kallankurichchi Formation as a result of post-depositional processes. Based on petrographic studies, it can be established that K 1 AMS axis of biotite mineral could represent the flow direction. The established paleocurrent direction for Sillakkudi is NW–SE direction while Ottakovil and Kallamedu Formations recorded NE–SW direction. Overall the paleoflow directions observed for Ariyalur Group is NE–SW to NW–SE.  相似文献   

4.
Gentoso, M. J., Evenson, E. B., Kodama, K. P., Iverson, N. R., Alley, R. B., Berti, C. & Kozlowski, A. 2012 (January): Exploring till bed kinematics using AMS magnetic fabrics and pebble fabrics: the Weedsport drumlin field, New York State, USA. Boreas, Vol. 41, pp. 31–41. 10.1111/j.1502‐3885.2011.00221.x. ISSN 0300‐9483. Thick, relatively homogeneous basal tills exposed in the drumlins and flutes of the Weedsport drumlin and flute field in New York State exhibit anisotropy of magnetic susceptibility (AMS) and pebble fabrics that are consistently oriented parallel to the streamlined bedforms. The pebble fabrics and AMS fabrics are concordant. In this study, six drumlins and five flutes were sampled. Thermally induced, incremental reduction of isothermal remanent magnetization indicates that AMS is caused by primarily elongate maghaemite grains. The orientations of principal axes of maximum susceptibility (k1) are generally parallel to pebble long‐axis orientations, and tend to plunge mildly up‐glacier. Fabric directions are generally parallel to drumlin long‐axis orientations, but deviate by 12°–23° from flute directions. Fabrics of the flutes are stronger and more unidirectional than those of the drumlins. These results support the use of AMS as a fast and objective method for characterizing fabrics in tills, and suggest hypotheses about basal processes linked to glacially streamlined landforms.  相似文献   

5.
The aim of this work is to study the Anisotropy of the Magnetic Susceptibility (AMS) in two Jurassic–Cretaceous synclines located in the northern border of the Central High Atlas (Morocco): the Aït Attab and Ouaouizaght basins. AMS is used in order to obtain the magnetic fabric and its relationship with the kinematic evolution of both basins. The tectonic evolution of the basins, still under discussion, is mostly considered as the result of inversion during Tertiary and perhaps since Bathonian, of extensional and/or strike-slip Jurassic basins. Both basins are filled with Upper Jurassic to Lower Cretaceous silts and sandstones, with less frequent marine marly limestones.The bulk magnetic susceptibility (km) generally shows higher values in the red facies (163.2 E−6 in AT and 168.6 E−6 in WZ) than in the yellowish marly limestones (97.88 E−6 in AT and 132 E−6 in WZ). Most sites show an oblate magnetic fabric. The rock magnetic analyses indicate that the main carrier of the magnetic susceptibility for the red facies is hematite, whereas in the yellowish facies there is a dominance of paramagnetic minerals. In both basins, the magnetic lineation (long axis of the ellipsoid, kmax axes) shows a predominant E–W direction. The overlapping of the stress fields during the Atlasic basins evolution, in both compressional and extensional regimes and hinder the straightforward interpretation of the magnetic fabrics. However, a coeval N–S compression during the times of sedimentation with an E–W transtension can explain the magnetic lineation found in many of the sites analyzed in the present work. There are also other less frequent directions of kmax axes (NE–SW and NW–SE) are interpreted as the result of local change of the stress field during the early extensional stage of basin formation.  相似文献   

6.
Oriented cylindrical cores of rock samples were collected from the Talchir and Barakar formations of the Lower Gondwana Supergroup of the Raniganj Basin exposed in and around Kalyaneshwari and Maithon areas. The cores (2.54 cm diameter and 2.2 cm height) were studied in the low field anisotropy of magnetic susceptibility (AMS) measurement to determine the nature of magnetic fabrics, to correlate it with the sedimentological characteristics and to determine the palaeocurrent patterns. The results derived from the statistical parameters (especially the q-factor), the shapes of the susceptibility ellipsoids and directional data of the AMS indicate that the magnetic fabrics within the studied units are primary (depositional) and are correlatable form the palaeoenvironmental features. The orientation of the maximum (K1), intermediate (K2) and minimum (K3) susceptibility axes is dispersed on the lower hemisphere equal area diagram rather than strong clusters which is not because of secondary (tectonic) influence but due to the moderate to high-energy environment of deposition of the sediments in the studied units. Based on the q-factor (which is 0.581 for Barakar Formation and 0.565 for Talchir Formation which are both <?0.7), it is suggested the AMS indicates that the imbrication of the K1 axis is the indicator of palaeocurrent. Also, the magnetic foliation (average value?=?1.255) exceeds the magnetic lineation (average value?=?1.107) and the shape parameter exceeds 0 in most cases pointing towards an oblate fabric. The palaeocurrent in the present study as indicated by the K1 axis imbrication is very similar in both the units under study and is due SW. However, apart from this precise palaeocurrent direction, there exists a certain degree of randomness of the susceptibility axes which are very clear indication of corresponding depositional environments.  相似文献   

7.
Anisotropy of magnetic susceptibility (AMS) applied to an alkaline granite from Meruoca (NE Brazil) recorded weak anisotropies, typically below 4%, and a considerable dispersion of the AMS axes. Red-clouded feldspars and clots of metasomatic minerals enclosed in magmatic crystals indicate that hydrothermal fluids altered the granite. U–Pb isotopic data show high-common Pb on zircons but allowed the calculation of a mean SHRIMP age of 523 ± 9 Ma attributed to the magmatic crystallization. Growth of fine oxides by late fluid–rock interactions was responsible for the scattering of AMS. Rock magnetic data indicate they consist mainly of an oxidized magnetite and (titano)hematite. Shape preferred orientation of mafic aggregates measured in granite quarries shows that the pluton preserves a gently dipping magmatic foliation. AMS in some quarries with a well-defined magmatic fabric, however, remains highly dispersed. When AMS mimics the mafic shape fabric, only magnetic foliations share a common orientation. Locally, AMS grounded in coarse Ti-poor magnetite associated with titanite develops a consistent subhorizontal oblate fabric that agrees with tectonic models suggesting that the cupola of the pluton has been exposed by erosion.  相似文献   

8.
Sealing layers are often represented by sedimentary sequences characterized by alternating strong and weak lithologies. When involved in faulting processes, these mechanically heterogeneous multilayers develop complex fault geometries. Here we investigate fault initiation and evolution within a mechanical multilayer by integrating field observations and rock deformation experiments. Faults initiate with a staircase trajectory that partially reflects the mechanical properties of the involved lithologies, as suggested by our deformation experiments. However, some faults initiating at low angles in calcite-rich layers (θi = 5°–20°) and at high angles in clay-rich layers (θi = 45°–86°) indicate the important role of structural inheritance at the onset of faulting. With increasing displacement, faults develop well-organized fault cores characterized by a marly, foliated matrix embedding fragments of limestone. The angles of fault reactivation, which concentrate between 30° and 60°, are consistent with the low friction coefficient measured during our experiments on marls (μs = 0.39), indicating that clay minerals exert a main control on fault mechanics. Moreover, our integrated analysis suggests that fracturing and faulting are the main mechanisms allowing fluid circulation within the low-permeability multilayer, and that its sealing integrity can be compromised only by the activity of larger faults cutting across its entire thickness.  相似文献   

9.
Magnetic fabric and rock magnetism studies were performed on three mafic dike swarms (total of 38 dikes) from the southernmost part of the São Francisco Craton (SFC) (Minas Gerais State, SE Brazil). They cut Archaean granite–gneiss–migmatite and paleoprototerozoic terranes. These swarms are classified as basic–noritic (Sm–Nd age  2.65 Ga), basic (Rb–Sr age  1.87 Ga) and metamorphic (Rb–Sr age  1.87 Ga) suites, in which the second is the most important. Magnetic fabrics were determined by applying both anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of anhysteretic remanent magnetization (AARM). In most sites magnetic susceptibility is dominantly carried by ferromagnetic minerals, however, in some sites the paramagnetic contribution exceeds 70% of bulk susceptibility. Mainly coarse to fine-grained Ti-poor titanomagnetite up to pure magnetite carry the magnetic fabrics.Three primary AMS fabrics are recognized which are all coaxial with the AARM fabric. Normal AMS fabric is dominant in the basic suite (16 of 20 analyzed dikes) and occurs in 4 and 3 dikes from the basic–noritic and metamorphic suites, respectively. This fabric is interpreted as a result of magma flow in which the analysis of Kmax inclination permitted to infer that the majority of dikes were fed by inclined flows (30° < Kmax < 60°), although 44% of dikes from the basic suite were fed by horizontal or sub-horizontal flows (Kmax < 30°). Intermediate AMS fabric was found in 50% of dikes from the basic–noritic and metamorphic suites, but in only 2 dikes from the basic suite. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. Inverse AMS fabric is a minority (2 dikes from each suite). The parallelism between AMS and AARM tensors for dikes with abnormal fabrics suggests a primary origin for them. Gyroremanent magnetization (GRM) effect was negligible for the majority of dikes, but it was found in two dikes from the basic suite with normal AMS fabric.Magnetic fabrics recognized for the three studied swarms do not depend on magnetic mineralogy, geochemical composition, dike strikes, nor the age of the swarms since the same magnetic minerals and magnetic fabric types are found in dikes from all suites. Inclined and horizontal flows allow us to infer the relative position of at least three magma sources (or magma chambers) from which the dikes were fed.  相似文献   

10.
Dikes of the eastern Troodos ophiolite of Cyprus intruded at slow ocean-spreading axes with dips ranging up to 15° from vertical and with bimodal strikes (now NE–SW and N–S due to post-88 Ma sinistral microplate rotation). Varied dike orientations may represent local stress fields during dike-crack propagation but do not influence the spatial-distributions or orientation-distributions of dikes' magnetic fabrics, nor of their palaeomagnetic signals. Anisotropy of magnetic susceptibility (AMS) integrates mineral orientation-distributions from each of 1289 specimens sampled from dikes at 356 sites over 400 km2 in the eastern Troodos ophiolite of Cyprus. In 90% of dikes, AMS fabrics define a foliation (kMAX–kINT) parallel to dike walls and a lineation (kMAX) that varies regionally and systematically. Magma-flow alignment of accessory magnetite controls the AMS with a subordinate contribution from the mafic silicate matrix that is reduced in anisotropy by sea-floor metamorphism. Titanomagnetite has less influence on anisotropy. Occasionally, intermediate and minimum susceptibility axes are switched so as to be incompatible with the kinematically reasonable flow plane but maximum susceptibility (kMAX) still defines the magmatic flow axis. Such blended subfabrics of kinematically compatible mafic-silicate and misaligned multidomain magnetite subfabrics; are rare. Areas of steep magma flow (kMAX plunge ≥ 70°) and of shallow magma-flow alternate in a systematic and gradual spatial pattern. Foci of steep flow were spaced 4 km parallel to the spreading axes and 6 km perpendicular to the spreading axes. Ridge-parallel separation of steep flow suggest the spacing of magma-feeders to the dikes whereas ridge-perpendicular spacing of 6 km at a spreading rate of 50 mm/a implies the magma sources may have been active for 240 Ka. The magma feeders feeding dikes may have been ≤ 2 km in diameter. Stable paleomagnetic vectors, in some cases verified by reversal tests, are retained by magnetite and titanomagnetite. In all specimens, the stable components were isolated by three cycles of low-temperature demagnetization (LTD) followed by ≥ 10 steps of incremental thermal demagnetization (TD). 47% of primary A-components [338.2 /+ 57.2 n = 207, α95 = 3.9; mean TUB = 397 ± 8 °C] are overprinted by a B-component [341.4 /+ 63.5, n = 96, α95 = 8.7; mean TUB = 182 ± 11 °C]. A- and B-components are ubiquitous and shared equally by the N–S and NE–SW striking dikes. A-component unblocking temperatures (TUB) are zoned subparallel to the fossil spreading axis. Their spatial pattern is consistent with chemical remagnetization at some certain off-axis distance determined by sea-floor spreading. A-components indicate less microplate rotation and more northerly palaeolatitudes that are consistent with metamorphic remagnetization after some spreading from the ridge-axis. Thus, their magnetizations are younger than those of the overlying volcanic sequence for which ChRMs are commonly reported as 274 /+ 33 (88 Ma).  相似文献   

11.
青藏高原东缘鲜水河断裂带磁组构特征及构造意义   总被引：2，自引：0，他引：2  
为了探究鲜水河断裂带的几何学、运动学特征,在野外构造、显微构造分析基础上,研究了鲜水河断裂带296块构造岩定向样品的磁组构特征和热磁特征,结果显示样品的平均磁化率km值总体较小,属微弱磁性到弱磁性;热磁实验及其显微构造表明顺磁性的页硅酸盐(如黑云母)等矿物对糜棱岩类样品磁化率贡献较大;磁化率各向异性度PJ总体较大,表明鲜水河断裂带构造变形强烈;磁化率椭球体形状参数T总体大于0,扁率E总体在1附近分布,说明鲜水河断裂带磁化率椭球体以扁圆形为主,整体上磁面理较磁线理发育,进一步显示出鲜水河断裂带构造变形样式以剪切、压扁为主,伴有拉伸的构造变形,同时也反映出鲜水河断裂带多次变形的综合特征;最小磁化率主轴Kmin方位表明鲜水河断裂带北段和南段分别受近EW向和NE-SW向主压应力控制;同时Kmin方位及其倾伏角特征显示鲜水河断裂带总体以左行走滑剪切为主,北段两侧块体在鲜水河断裂带两次不同的构造活动时期,各自有一定的相对抬升,但抬升幅度均不大;南段则是SW块体相对NE块体抬升,抬升幅度较大;整个断裂带特征显示出鲜水河断裂带在向南发展逐渐转化为挤压构造,这可能与青藏高原物质的向东逃逸受阻以及鲜水河断裂带与龙门山断裂带在此交接的地质背景不无关系.  相似文献   

12.
The intrinsic room temperature magnetic properties of pure calcite were determined from a series of natural crystals, and they were found to be highly dependent on the chemical composition. In general, dia-, para-, and ferromagnetic components contribute to the magnetic susceptibility and the anisotropy of magnetic susceptibility (AMS). With a combination of magnetic measurements and chemical analysis these three contributions were determined and related to their mineralogical sources. The intrinsic diamagnetic susceptibility of pure calcite is − 4.46 ± 0.16 × 10− 9 m3/kg (− 12.09 ± 0.5 × 10− 6 SI) and the susceptibility difference is 4.06 ± 0.03 × 10− 10 m3/kg (1.10 ± 0.01 × 10− 6 SI). These diamagnetic properties are easily dominated by other components. The paramagnetic contribution is due to paramagnetic ions in the crystal lattice that substitute for calcium; these are mainly iron and manganese. The measured paramagnetic susceptibility agrees with the values calculated from the known concentration of paramagnetic ions in the crystals according to the Curie law of paramagnetic susceptibility. Substituted iron leads to an increase in the AMS. The paramagnetic susceptibility difference was found to correlate linearly with the iron content for concentrations between 500 and 10,000 ppm. An empirical relation was determined: (k1 − k3)para (kg/m3) = Fe-content (ppm) × (1 ± 0.1) × 10− 12 (kg/m3/ppm). The maximum susceptibility difference (Δk = k1 − k3) was found to be unaffected by iron contents below 100 ppm. Ferromagnetic contributions due to inclusions of ferromagnetic minerals can dominate the susceptibility. They were detected by acquisition of isothermal remanent magnetization (IRM) and their contribution to the AMS was separated by high-field measurements.  相似文献   

13.
柴达木盆地西部狮子沟一带新生代沉积岩磁组构分析结果显示, 岩石磁组构具有磁面理发育、磁线理不发育、磁化率量值椭球呈压扁状的特点; 磁化率各向异性度P值不大, 反映总体构造变形相对较弱。岩石磁组构反映的应力状态总体为以NE向挤压为主, 与轴向NW的背斜构造发育相一致。该区岩石磁组构大多具有原始沉积磁组构特征, 磁面理产状大体上反映沉积岩层的层理, 同时也记录了受NE向挤压作用的痕迹。根据岩石磁组构与地层层理之间的关系分析, 柴西地区两翼不对称的狮子沟背斜具有断展褶皱性质, 其形成与下部的花土沟逆冲断层向南西方向的仰冲有关。   相似文献   

14.
The transition between extensional and compressional-driven magnetic fabrics in sedimentary rocks is explored in this paper through the study of an example of the Basque–Cantabrian basin. In the area where extensional structures prevail and no superimposed deformation is observed, except for gentle large-scale folds, the magnetic fabric is interpreted as extensional, in consistency with mesostructural (tension gashes) and macrostructural (large-scale faults) data. Compressional tectonic fabrics are unequivocally interpreted in the area with cleavage development related to the buttressing of the syn-rift sequence against faults located near the northern basin margin. In this area, kmax is oriented according either to the intersection lineation or the dip direction of cleavage planes. In the area located in-between, where no macroscopic evidence of either compression or extension exist, there is a transitional fabric between compressional (resulting from the modification during inversion of a previous sedimentary or extensional fabric) and extensional (inherited from the extensional stage) magnetic fabrics that correlate with subtle evidences at the microscopic scale (pressure shadows, deformation and re-orientation of nodules). Therefore, the magnetic fabric is revealed as an exceptionally sensitive marker of deformation in sedimentary rocks. This transition in the magnetic fabric occurs within a length of 6.25 km along the cross-section that correlates with a thickness of 200 m of the stratigraphic pile. These results indicate that even in the absence of clear structural markers of compressional deformation, extensional magnetic fabrics can be only interpreted when there is a minimum separation (in the vertical or the horizontal) to the cleavage front.  相似文献   

15.
秦岭商丹构造带内发育的晚三叠世沙沟街韧性剪切带蕴含大量地质信息,很好地记录了秦岭印支期碰撞造山过程。为了探究该剪切带的运动学特征及其动力学背景,在野外观测、显微构造分析的基础上,对其中发育的糜棱岩进行了磁组构和运动学涡度研究。岩石磁学和磁组构分析结果显示:样品的平均磁化率Km值总体较高,载磁矿物主要为磁铁矿等铁磁性矿物;磁化率各向异性度PJ值较大,表明构造变形较为强烈;形态参数T值多大于0,反映磁化率椭球体以扁球体为主;磁线、面理优势产状与野外观测到的矿物线、面理较为一致。结合磁组构、边界断层以及C面理产状,认为沙沟街韧性剪切带具有左行走滑挤压的运动学特征。运动学涡度Wk值及其分布特征表明,沙沟街剪切带中纯剪切作用所占的比重总体大于简单剪切作用,并且剪切带的核部应位于北界断层附近。综合分析认为,沙沟街韧性剪切带的运动学特征反映了总体斜向汇聚背景下的局部走滑挤压,与商丹带西段发育的同期韧性剪切带具有完全反向的运动学指向,这可能与碰撞导致的侧向挤出构造有关  相似文献   

16.
Orogenic compression-related fabrics (~340–335 Ma) were reworked during regional extensional deformation (~328–325 Ma) in a large anatectic crustal domain of the Central Vosges (NE France). The extension was first accommodated by brittle dilation affecting vertically anisotropic high-grade rocks associated with emplacement of subvertical granitic sheets. The AMS fabric of granitoids is consistent with highly partitioned transtensional deformation marked by alternations of flat and steep foliations and development of orthogonal lineations. This deformation passes to top-to-the-southwest ductile shearing expressed in southerly migmatitic middle crust. The AMS fabric revealed moderately west-dipping foliations bearing subhorizontal NNW–SSE-trending lineations and predominantly plane strain to prolate shapes. This fabric pattern is interpreted as a viscous response of stretched partially molten crust during continuous ductile extension. Vertical ascent of voluminous granites and stoping of the upper crust occurs further south. This gravity ascent triggered by extension leads to development of south-dipping AMS foliations, south-plunging lineations and oblate fabrics in various crustal granites. Vertical shortening related to ascent of these (~325 Ma) granitoids and persistent N–S stretching is responsible for reworking and remelting of originally vertical compression-related fabric in roof supracrustal granites (~340 Ma) and development of highly prolate fabrics in these rocks. This work shows that the finite shape of AMS fabric ellipsoid is highly sensitive to both strain regime and superpositions of orthogonal deformation events.  相似文献   

17.
阿尔金断裂双层花状构造的厘定   总被引：15，自引：3，他引：15  
阿尔金断裂带主要经历了两阶段的构造演化,形成不同层次且具有不同特点的典型花状构造型式。宏观断层构造组合、断层擦痕产状的变化以及节理组合充分反映出晚期阶段浅部层次花状构造的存在,早期阶段中部层次花状构造由反映区域应变型式的糜棱状岩石中其它应变标志性组合的存在表现出来。结合ArAr记年与矿物对测温结果,表明前者形成于距今46Ma,是一次规模最强烈的变形叠加事件;后者由距今91～89Ma的韧性走滑运动形成,并伴有断层带内的低级变质作用(温度270～500℃,压力0.05～0.45GPa)。两阶段双层花状构造并存充分说明区域性走滑作用过程及其调节作用的多阶段性与继承性,其出现部分地调节了由印度板块和欧亚板块陆—陆碰撞过程中区域性地壳物质的向东蠕散和隆升过程。  相似文献   

18.
Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10−3 (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR0–30, pAAR30–60 and pAAR60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of Kmax inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (Kmax<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.  相似文献   

19.
Foreland basin growth strata are ideal recorders of deformation rates and kinematics in tectonically active regions. This study develops a high-resolution chronostratigraphic age model to determine folding rates in the Eocene-Oligocene terrestrial growth strata of the Berga Conglomerate Group, NE Spain. The Berga Conglomerate Group was sampled for rock magnetic, magnetostratigraphic, and magnetic susceptibility (χ) cyclostratigraphy analyses. Analysis of rock magnetic measurements indicate a mixed mineral assemblage with both paramagnetic and ferromagnetic minerals. A new magnetic reversal stratigraphy constrains the time frame of folding and is in agreement with previous interpretations. Time series analysis of χ variations show statistically significant power at expected orbital frequencies and provides precession-scale (20 kyr) temporal resolution. Strain measurements including anisotropy of magnetic susceptibility (AMS) fabrics and bedding plane strain worm burrow distortion are consistent with fixed hinge, flexural folding kinematics. Fault-related folding was modeled using χ cyclostratigraphy timing and strain measurement kinematic constraints. The onset of folding was at 33.85 Ma and the end of deformation is less constrained but is younger than 31.06 Ma. Deformation and sediment accumulation rates are unsteady at 20 kyr time scales but appear artificially steady at polarity chron time scales.  相似文献   

20.
The Apiaí gabbro-norite is a massive fine-grained Neoproterozoic intrusion emplaced in a core of synformal structure that deforms low-grade marine metasedimentary rocks of the Ribeira Belt of south-eastern Brazil. The lack of visible magmatic layering or any internal fabric has been a major limitation in deciding whether the emplacement occurred before or after the regional folding. To assist in the tectonic interpretations, we combine low-field anisotropy of magnetic susceptibility (AMS) and silicate shape preferred orientation (SPO) to reveal the internal structure of the mafic intrusion. Magnetic data indicate a mean susceptibility of about 10−2 SI and a mean anisotropy degree (P) of about 1.08, essentially yielded by titanomagnetite. The magnetic and silicate foliations for P ≥ 1.10 are parallel to each other, while the lineations tend to scatter on the foliation plane, in agreement with the dominant oblate symmetry of the AMS and SPO ellipsoids. For lower P values, the magnetic and silicate fabrics vary from coaxial to oblique, and for P ≤ 1.05, their shapes and orientations can be quite distinct. The crystal size distribution (CSD) of plagioclase for P > 1.05 is log linear, in agreement with a bulk simple crystallisation history. These results combined show that for a strong SPO, corresponding to a magnetic anisotropy above 1.10, AMS is a reliable indicator of the magmatic fabric. They indicate that the Apiaí gabbro-norite consists of sill-like body that was inclined gently to the north by the regional folding.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号