首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The evaluation of the undrained cyclic resistance of sandy deposits is required to forecast the soil behaviour during an earthquake (liquefaction, cyclic mobility); due to the difficulties in obtaining undisturbed samples of most liquefiable soils, it is usually deduced from field test results such as cone penetration tests. This paper proposes a methodology to evaluate the undrained cyclic resistance from normalised cone resistance of two well-studied silica sands (Ticino and Toyoura), with different mineralogy, one mainly composed of feldspar, the other of quartz. The determination of the cyclic resistance of Ticino and Toyoura sands was achieved through undrained cyclic triaxial tests on reconstituted specimens. The tip resistance was deduced from CPTs performed in centrifuge with a miniaturised piezocone on homogeneous reconstituted models. Both the undrained cyclic and tip resistances were correlated with the state parameter ψ. Results of centrifuge and triaxial tests were combined through ψ to deduce the cyclic resistance ratio CRR directly from the normalised cone resistance. The shape of the curve relating CRR to the normalised cone resistance resulted unusual respect to all the recognised curves widespread in the geotechnical literature. The aim of the proposed correlations is to provide a useful instrument to improve the actual knowledge on liquefaction and to give a contribution based on the critical state soil mechanics framework to the development of refined correlations between the cyclic resistance of a sand and the results of cone penetration tests.  相似文献   

2.
The liquefaction susceptibility of various graded fine to medium saturated sands are evaluated by stress controlled cyclic triaxial laboratory tests. Cyclic triaxial tests are performed on reconstituted specimens having global relative density of 60%. In all cyclic triaxial tests; loading pattern is selected as a sinusoidal wave form with 1.0 Hz frequency, and effective consolidation pressure is chosen to be 100 kPa. Liquefaction resistance is defined as the required cyclic stress ratio which caused initial liquefaction in 10 cycles during the cyclic triaxial test. The results are used to draw relationship between grading characteristics (e.g. coefficient of uniformity and coefficient of curvature) and the liquefaction resistance of various graded sands. It is found that a relationship between cyclic resistance and any of the size (i.e. D10, D30 or D60) would be more realistic than to build a relation between grading characteristics and the cyclic resistance.  相似文献   

3.
In a number of recent case studies, the liquefaction of silty sands has been reported. To investigate the undrained shear and deformation behaviour of Chlef sand–silt mixtures, a series of monotonic and stress-controlled cyclic triaxial tests were conducted on sand encountered at the site. The aim of this laboratory investigation is to study the influence of silt contents, expressed by means of the equivalent void ratio on undrained residual shear strength of loose, medium dense and dense sand–silt mixtures under monotonic loading and liquefaction potential under cyclic loading. After an earthquake event, the prediction of the post-liquefaction strength is becoming a challenging task in order to ensure the stability of different types of earth structures. Thus, the choice of the appropriate undrained residual shear strength of silty sandy soils that are prone to liquefaction to be used in engineering practice design should be established. To achieve this, a series of undrained triaxial tests were conducted on reconstituted saturated silty sand samples with different fines contents ranging from 0 to 40 %. In all tests, the confining pressure was held constant at 100 kPa. From the experimental results obtained, it is clear that the global void ratio cannot be used as a state parameter and may not characterize the actual behaviour of the soil as well. The equivalent void ratio expressing the fine particles participation in soil strength is then introduced. A linear relationship between the undrained shear residual shear strength and the equivalent void ratio has been obtained for the studied range of the fines contents. Cyclic test results confirm that the increase in the equivalent void ratio and the fines content accelerates the liquefaction phenomenon for the studied stress ratio and the liquefaction resistance decreases with the increase in either the equivalent void ratio or the loading amplitude level. These cyclic tests results confirm the obtained monotonic tests results.  相似文献   

4.
The liquefaction vulnerability of fine- to coarse-graded saturated sand and gravelly sand is evaluated by stress control cyclic triaxial laboratory tests. Cyclic triaxial test on reconstituted specimens is carried out with relative density of 45 %. Cyclic triaxial tests performed by sinusoidal wave form with 1-Hz frequency and with the effective consolidation pressure equal to 100 kPa. Cyclic stress ratio which caused initial liquefaction in 15 cycles recognized as the liquefaction resistance in cyclic triaxial test of present study. The result had been used to find a relationship between liquefaction resistance and the grading characteristics (e.g., coefficient of curvature and coefficient of uniformity) of various graded sands and gravelly sands. Then, it is realized that a relationship between liquefaction resistance and any of the sizes (i.e., D 10, D 30, D 50, D 60) appears to be more practical.  相似文献   

5.
Geotechnical reconnaissance of a recurrent liquefaction site at a Quaternary alluvial deposit in southern Taiwan was conducted to establish a comprehensive case history for liquefaction on silty fine sand with high fines content. The liquefaction occurred at a silty fine sand layer with D50 = 0.09 mm and fines content greater than 35% and was triggered by a Mw = 6.4 earthquake on March 4, 2010, which induced maximum horizontal acceleration up to 0.189 g at the site. In situ subsurface characterizations, including standard penetration test, cone penetration test, and shear wave velocity measurement, were performed as well as cyclic simple shear tests on undisturbed specimens retrieved by a modified hydraulic piston sampler. Comparisons of cyclic resistance ratios (CRRs) indicate that CPT sounding with standard penetration rate could overestimate the resistance ratio and drainage conditions during penetration should be considered for high fines content soil in the liquefaction analysis. Additionally, variations of CRRs from different in situ tests indicate that correlations among in situ tests and CRR could be soil specific and precautions should be taken when using these curves on silty fine sands.  相似文献   

6.
水电站坝的砂层地基地震液化可靠度研究   总被引：2，自引：1，他引：1  
对四川地区江河上数座水电站坝基砂层的26组动力三轴试验资料进行了统计分析,基于动剪应力比法的液化判别方法推导了的地震液化的极限状态方程,使用蒙特卡洛随机抽样的方法计算了砂层液化的失效概率,并对某水电站的厂房地基砂层的液化可靠度进行了计算分析。研究表明,统计按粉砂样总体和中细砂样总体划分较为合理;砂层的动剪应力比可采用正态分布;电站砂层地基地震液化的最危险工况为,闸坝盖重加稳定的向上渗流及遭遇Ⅶ度地震荷载,为高液化风险,其液化概率随埋深加大而增大,最危险部位为砂层底板,对坝基砂层应进行抗液化处理。  相似文献   

7.
There have been significant advances in the application of critical state,CS,in liquefaction potential assessment.This was done by comparing state parameter,j with estimated characteristic cyclic stress ratio,CSR due to an earthquake.A cyclic resistance ratio,CRR curve,which can be determined from cyclic liquefaction tests,separates historical liquefied and non-liquefied data points(j,CSR).On the other hand,the concepts of equivalent granular state parameter,j*,which was developed for sands with fines,can be used in lieu j to provide a unifying framework for characterizing the undrained response of sands with non/low plasticity fines,irrespective of fines content(fc).The present work combines these two propositions,and by merely substituting j*for j into the aforementioned CS approach to capture the influence of fc.A series of static and cyclic triaxial tests were conducted,separately and independently of the concept of j*,for sand with up to fc of 30%.The clean sand was collected from Sabarmati river belt at Ahmedabad city in India which was severely affected during the Bhuj earthquake,2001.The experimental data gave a single relation for CRR and j*which was then used to assess liquefaction potential for a SPT based case study,where fc varies along the depth.The prediction matched with the field observation.  相似文献   

8.
为研究地震作用下饱和砂土液化判别及地震放大效应的影响因素,采用边界面塑性模型框架内开发的砂土本构模型,基于开源有限元平台OpenSees建立了一维剪切梁土柱模型。以循环应力比CSR和循环抗力比CRR为控制指标,对比了不同液化判别方法的差异,分析了地震荷载类型和砂土相对密度对液化判别和放大效应的影响。研究表明：与数值模拟结果相比,Seed简化法计算的CSR更大,判断饱和砂土场地发生液化的可能性更高;冲击型地震波较振动型地震波更容易使饱和砂土场地发生液化,砂土相对密度越小场地越容易发生液化;放大系数随埋深的减小而增大,振动型地震波引起的放大效应整体大于冲击型,埋深较大时放大系数随砂土相对密度的增大而减小。  相似文献   

9.
利用GDS空心圆柱仪进行了一系列主应力方向角?d变化的轴向、扭转、内压和外压四向耦合不排水循环剪切试验。在均等固结条件下,着重研究了循环加载方向角?d0对饱和粉土动力特性的影响。试验结果表明：饱和粉土的双规准化孔压发展模式与?d0无关,但受循环应力比CSR的影响;广义剪应变的发展模式不受?d0的影响。在循环剪切过程中,循环加载方向的变化对粉土的不排水动强度有显著影响,饱和粉土的动强度CRR随着?d0的增大呈现出先减小后增大的变化趋势,且当?d0=45°时CRR最小。同时,建立了反映?d0与CSR影响的孔压、变形的模型,并给出了相应的动强度表达式。  相似文献   

10.
The paper summarizes a compilation of existing cyclic experimental data on reconstituted and undisturbed specimens of low-plasticity fine-grained soils to assess liquefaction resistance. The authors normalized the data to reduce the effect of other relevant factors such as shear mode, density, effective confining stress and cyclic loading frequency. It is indicated that liquefaction resistance of the specimens reconstituted using slurry consolidation approach is lower than that of the undisturbed specimens. The liquefaction resistance for undisturbed specimens decreases with an increase in the plasticity index up to 4–5 and then increases with a further increase in plasticity index. A new correction factor K PI to estimate the effect of plasticity index on cyclic resistance ratio is proposed for design purposes and added into the framework of liquefaction evaluation of claylike fine-grained soils with PI of 7–18 (change to 5–18, if ML–CL) on the base of the approach of Boulanger and Idriss. Because the effect of plasticity index on liquefaction resistance is slight when the plasticity index is <7, it is suggested that the liquefaction evaluation of sandlike fine-grained soils with PI of 0–7 (changed to 0–5, if ML–CL) follows the framework of simplified procedures using SPT and CPT data.  相似文献   

11.
Medium-coarse sands (CS) were dredged and exhausted in land reclamation. However, the remaining silty-fine sands (FS) were wasted. The liquefaction behavior of dredged silty-FS and the possibility of utilizing the remaining silty-FS as dredger fill source for land reclamation should be investigated. Cyclic consolidation-undrained triaxial tests were performed to investigate the liquefaction resistance of dredged silty-FS under different influencing factors. The cyclic stress ratio (CSR) of dredged silty-FS increased with the increase in initial relative density and consolidation stress ratio and decreased with the increase in silt content and consolidation stress. The CSR first decreased with the increase in clay content up to a threshold value and increased with the increase in clay content. A regression model was created to estimate the relationship between CSR and silt content, clay content, initial relative density, consolidation stress, consolidation stress ratio, and cyclic resistance ratio. Response surface methodology (RSM) was employed to investigate the mutual influence among the five independent variables. On the basis of cyclic triaxial tests, particle flow code models were introduced to investigate the microscopic internal fabric changes of dredged silty-FS and the influence of extended factors on liquefaction. The average microscopic contact force and coordination number between particles controlled the macroscopic mechanical behavior of sands. Sand liquefaction was due to the cumulative loss of coordination number under cyclic loading. The average contact force between particles was linearly decreased to 0 and the coordination number sharply decreased when the sample reached initial liquefaction. On the basis of numerical tests, CSR increased with the increase in D50 and vibration frequency. The influence of vibration frequency was relatively small. In addition, the CS–FS and CS–FS–CS combination layers showed greater liquefaction resistance than the FS layer. In the filling process, the interbed of FS and CS improved the liquefaction resistance of dredged silty-FS to a certain extent.  相似文献   

12.
液化土层中桩基水平承载特性分析   总被引：9，自引：0，他引：9  
王建华  冯士伦 《岩土力学》2005,26(10):1597-1601
通过桩土相互作用的振动台模型试验,获得了不同相对密度的砂土在振动液化过程中桩身弯矩随土层振动累积孔压的变化关系。进而通过拟静力方法,确定了土层液化过程中的衰化p-y曲线,并计算出桩身弯矩的分布。计算结果与实测结果的比较分析表明：若土层的振动累积孔压比ru≤比≤0.2时,桩的水平承载能力没有明显降低。当土层的振动累积孔压比ru≥0.8时,若土层的相对密度Dr≤40 %,桩的水平承载能力降低90 %;若土层的相对密度Dr≥50 %,桩的水平承载能力降低75 %。  相似文献   

13.
南京砂强度特征与静态液化现象分析   总被引：2，自引：1，他引：1  
朱建群  孔令伟  钟方杰 《岩土力学》2008,29(6):1461-1465
在松散、中密和密实状态下,以南京粉细砂三轴固结不排水试验结果为基础,进行了强度、变形与静态液化特征的分析。松散南京砂强度特性表现出典型的应变软化,当轴向变形小于1 %时强度达到最大值,而后急剧降低;在50,100 kPa围压时发生了静态液化。但随着固结压力的增大,静态液化消失。与南京砂具有相同土骨架的松散纯净砂却在低围压下未出现静态液化,其形成机制是：粉粒的存在未使土体孔隙比发生较大变化,却引起更大的体缩性;中密和密实南京粉细砂表现出加工硬化的强度特征,临界应力状态线倾角高达55°,具有较高的抗静态液化能力。  相似文献   

14.
This paper presents simplified dilatometer test (DMT)-based methods for evaluation of liquefaction resistance of soils, which is expressed in terms of cyclic resistance ratio (CRR). Two DMT parameters, horizontal stress index (KD) and dilatometer modulus (ED), are used as an index for assessing liquefaction resistance of soils. Specifically, CRR–KD and CRR–ED boundary curves are established based on the existing boundary curves that have already been developed based on standard penetration test (SPT) and cone penetration test (CPT). One key element in the development of CRR–KD and CRR–ED boundary curves is the correlations between KD (or ED) and the blow count (N) in the SPT or cone tip resistance (qc) from the CPT. In this study, these correlations are established through regression analysis of the test results of SPT, CPT, and DMT conducted side-by-side at each of five sites selected. The validity of the developed CRR–KD and CRR–ED curves for evaluating liquefaction resistance is examined with published liquefaction case histories. The results of the study show that the developed DMT-based models are quite promising as a tool for evaluating liquefaction resistance of soils.  相似文献   

15.
This study pertains to prediction of liquefaction susceptibility of unconsolidated sediments using artificial neural network (ANN) as a prediction model. The backpropagation neural network was trained, tested, and validated with 23 datasets comprising parameters such as cyclic resistance ratio (CRR), cyclic stress ratio (CSR), liquefaction severity index (LSI), and liquefaction sensitivity index (LSeI). The network was also trained to predict the CRR values from LSI, LSeI, and CSR values. The predicted results were comparable with the field data on CRR and liquefaction severity. Thus, this study indicates the potentiality of the ANN technique in mapping the liquefaction susceptibility of the area.  相似文献   

16.
The use of shear wave velocity (V s) measurements as an in situ test for evaluation of liquefaction potential has increased substantially due to its advantages. Relatively large numbers of studies have been performed to establish the correlation between V s and liquefaction resistance (CRR) of clean sands. Usually, natural sands contain silt and/or clay, and previous studies have shown that both the amount of fines and their nature influence the values of CRR as well as V s. Therefore, the CRR–V s correlations may also be affected by fines content and type of sandy soils. However, effect of fines content and especially fines type of sandy soils on the correlation between V s and CRR is inadequately addressed in the literature. In this study, cyclic triaxial and bender element tests were conducted on samples of sand containing various amounts of different types of fines, and the effects of fines on the values of CRR and V s are investigated. The results show that G 0 and CRR reduce even when small amounts of fines are added to sand. Therefore, use of plasticity index (PI) of the fines fraction is better than the PI of the overall soil when trying to assess the effects of fines. Using obtained experimental data as well as the established semiempirical CRR–V s relationship, the CRR–V s correlation was developed for all the tested soils, and the effect of fines type on the correlation is also examined. Based on the results obtained in this study, CRR–V s correlation is affected by both the amount and the plasticity of the fines present in the sand, and this correlation is soil specific.  相似文献   

17.
基于Logistic回归模型的砂土液化概率评价   总被引：2，自引：1，他引：1  
潘建平  孔宪京  邹德高 《岩土力学》2008,29(9):2567-2571
以国内外23次地震中200组场地液化实测数据为基础,通过Logistic回归分析,建立关联修正标准贯入击数N160cs与循环应力比CSR的液化概率模型。以50 %液化概率水平为液化与非液化的临界点,建立了指数形式的抗液化应力比CRR计算式,新建概率模型预测饱和砂土液化与非液化的成功率分别为85.71 %和76.14 %,具有较高的可靠性。与已有模型比较,使用了新的数据和修正系数,消除了一些不合理的偏差,总体判别结果偏于安全。为了将确定性分析方法与概率分析方法联系起来,建立了抗液化安全系数FS与液化概率PL的关系式。算例结果表明,新建概率模型简单、实用、可靠。  相似文献   

18.
地震引起的土体液化和地基失效对岩土工程师而言仍是一个热点问题。地震液化及地基变形可以采用多种地基加固方法防治,碎石桩技术是常用方法之一。碎石桩复合地基抗液化效用主要是增加桩周土体的密度、桩体的排水以及桩体分担地震水平剪应力作用(桩体减震作用)。目前,以抗液化为主的碎石桩复合地基的设计以及效果评价方法仍只考虑加密作用。首先通过3个模型(1个饱和砂土地基模型、2个碎石桩复合地基模型)的振动台试验研究抗液化碎石桩的减震作用。然后以试验记录的模型动力反应以及建立的理论模型为基础,分析碎石桩复合地基的桩体减震作用。试验及理论分析结果表明,复合地基中的碎石桩可以明显地降低作用在桩间可液化土上的地震剪应力。  相似文献   

19.
常剪应力路径下含气砂土的三轴试验   总被引：1，自引：0，他引：1  
孔亮  刘文卓  袁庆盟  董彤 《岩土力学》2019,40(9):3319-3326
天然气水合物完全分解时,产生的气体使得能源土孔隙压力急速增加,有效应力减小,进而引起土体液化破坏。此时深海能源土斜坡的应力状态与静力液化失稳过程可简化为含气土在常剪应力排水(或不排水)应力路径下的破坏问题。以此为背景,提出了制备含气砂土试样的改进充气管法,并开展了含气砂土的常剪应力路径三轴试验。22组试验结果表明:同一孔隙比的含气密砂在不同围压与常剪应力下具有相同的失稳线;含气砂土试样失稳时的应力比和体变均随初始相对密实度的增大而增大;含气密砂在常剪应力路径下饱和度对失稳特征影响的规律性在排水与不排水条件下均不明显,但在不排水条件下含气砂土的孔压(或体变)对变形的敏感性降低;含气密砂在常剪应力路径到达失稳点之后,排水条件下是瞬变的液化鼓胀破坏,不排水条件下是渐变的剪切破坏。  相似文献   

20.
Predicting flow liquefaction,a constitutive model approach   总被引：1，自引：1，他引：0  
In this paper, flow liquefaction criterion for contractive loose sands is analytically extracted based on the fundamental definition of flow liquefaction. In order to obtain the closed form of this criterion, Dafalias–Manzari constitutive model is employed; so the stress ratio at the onset of flow liquefaction is presented as a function of model parameters, state parameter and void ratio. Flow liquefaction line, as a graphical form of suggested criterion in stress space, shows that the peak points of undrained stress paths with same void ratios are not necessarily in a straight line. In order to validate the reliability of proposed flow liquefaction line to predict the onset of instability, it has been compared with the results of experimental tests performed on Toyoura, Ottawa and Leighton Buzzard sands. The verification results show that the present criterion can satisfactorily predict the onset of flow liquefaction in monotonic and cyclic undrained tests of saturated sands as well as the structural collapse in constant deviatoric stress tests of loose dry sands.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号