首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Bromine and iodine are important tracers for geochemical and environmental studies. In this study, a rapid acid digestion (HNO3 + HF) with ammonia dilution for the simultaneous determination of bromine and iodine in soils and sediments using ICP‐MS was developed. The recoveries of Br and I were controlled by the synergic effect of temperature and time. It took only 15 min at 140 °C for the complete recovery of Br and I in sediment (GSD‐2) and soil (GSS‐24) reference materials, which is a process that needs 2–6 h at 90 °C. A serious loss of Br and I was found at a higher digestion temperature of 190 °C. A 5% v/v NH4OH dilution effectively eliminated the memory effects and stabilised the signals of Br and I. Moreover, ammonia dilution also avoided the corrosiveness of HF on the sample introduction system and torch of ICP‐MS. Tellurium is a more suitable internal standard element than In in the ammonia medium. To avoid the adsorption of residues of dissolution on Te, addition of Te should be carried out after centrifuging the solution. The developed method was successfully applied to determine Br and I in fifty‐three Chinese soil and sediment reference materials. This simple method shows great potential for the rapid determination of Br and I in large batches of geological and environmental samples commonly analysed for mineral exploration and environmental geochemistry studies.  相似文献   

2.
Concentrations of halogens (fluorine, chlorine, bromine and iodine) were determined in six geochemical reference materials (BHVO‐2, GS‐N, JG‐1, JR‐1, JB‐1b, JB‐2). Halogens were first extracted from powdered samples using a pyrohydrolysis technique, then hydrolysis solutions were analysed by ion chromatography for F and Cl and inductively coupled plasma‐mass spectrometry for Br and I. The detection limits in solutions were 100 μg l?1 for both F and Cl and 10 ng l?1 for Br and I. Considering the extraction procedure, performed on a maximum of 500 mg of sample and producing 100 ml of pyrohydrolysis solution, detection limits in rock samples were 20 mg kg?1 for F and Cl and 2 μg kg?1 for Br and I. The mean analytical errors on the studied composition ranges were estimated at 10 mg kg?1 for F and Cl, 100 μg kg?1 for Br and 25 μg kg?1 for I. The concentration values, based on repeated (generally > 10) sample analysis, were in good agreement generally with published values and narrowed the mean dispersion around mean values. Large dispersions are discussed in terms of samples heterogeneity and contaminations during sample preparation. Basaltic RMs were found to be more suitable for studies of halogen compositions than differentiated rock material, especially granites – the powders of which were heterogeneous in halogens at the 500 mg level.  相似文献   

3.
Complete dissolution is essential to obtain accurate analytical results for geological samples. Felsic rocks are known to be very difficult to dissolve because of the presence of refractory minerals such as zircon. In this study, we undertook a systematic evaluation of the effect of the HF/HNO3 ratio, digestion time, digestion temperature, digested test portion mass and the presence of insoluble fluorides on analytical results for the felsic rock GSP‐2 using high‐pressure HF and HF/HNO3 digestion. Digestion in mixtures of HF and HNO3 acids is a commonly used method of dissolution for geological samples. However, our results clearly indicate that adding HNO3 inhibited the digestion capabilities of HF for refractory minerals such as zircon. It took 8–12 hr for Zr to be completely recovered in GSP‐2 at 190 °C, whereas it needed about 36 and 72 hr at 160 and 140 °C, respectively. White precipitates were observed in the final solution for test portion mass > 100 mg, irrespective of which of the five different digestion solutions was used (1 ml HF, 2 ml HF, 1 ml HF + 0.5 ml HNO3, 1 ml HF + 1 ml HNO3 and 1.5 ml HF + 1.5 ml HNO3). Environmental scanning electron microscopy showed that these precipitates were mainly composed of AlF3. Instead of further HCl, HNO3 or HClO4 attack, we propose that using ultra‐fine samples and a small sample size is a good way to avoid the formation of insoluble residues (e.g., fluorides). To further investigate the precision and accuracy of the proposed method (using HF alone as the digestion solution during the first acid attack step), a suite of silicate rock reference materials was analysed. Most of the results were found to be in reasonable agreement with the reference values, with a relative error of < 10%.  相似文献   

4.
Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO3 results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF3 precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH4HF2 open vessel digestion and (c) NH4F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF3 and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH4HF2 or NH4F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO3, the white precipitates and the semi‐transparent gels present in the NH4HF2 and NH4F digestion methods could be efficiently dissolved by evaporation with HClO4. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.  相似文献   

5.
混合酸敞开或高压密闭溶样-ICPMS测定地质样品中稀土元素   总被引：9，自引：9，他引：0  
贾双琳  赵平  杨刚  孙霞  何海 《岩矿测试》2014,33(2):186-191
测定地质样品中的稀土元素时,用碱熔法处理样品过程繁琐,混合酸敞开酸溶法的酸种类多,用量较大,而微波消解法批次处理样品少,效率不高。本文比较了7种混合酸敞开酸溶体系、硝酸-氢氟酸高压密闭体系对样品溶样的效果,采用电感耦合等离子体质谱测定15个稀土元素的含量,建立了一套样品前处理体系简单、酸用量少、相对快捷的测定地质样品中稀土元素的方法。通过对59件国家标准物质的测试分析,结果表明硫酸-氢氟酸敞开酸溶和硝酸-氢氟酸高压密闭溶样两套体系的方法检出限、精密度、准确度均能达到地质行业相关标准测试要求。硫酸-氢氟酸敞开酸溶体系对于样品中钡含量较高,或样品量较少时适用;硝酸-氢氟酸高压密闭溶样体系的检出限更低,适用于大批量样品的分析测试。两套体系均不需要进行数学干扰校正,且酸用量少（最多6 mL）,分析效率高（平均每日分析测试300件）,有较大的推广应用价值。  相似文献   

6.
Evidence for redistribution of Pt and Pd in the Acoje ultramafic rocks led to an investigation of the role of Cl, Br, F, I and C in Pt and Pd transport in hydrothermal solution. Anomalously high contents of 300–1000 ppm Cl, 3 ppm Br, up to 50 ppm F, 180–380 ppm I and 300–3300 ppm C are characteristic of the Acoje ultramafic rocks. The Cl and Br concentrations are restricted to serpentinized dunites and a positive correlation between Br and Cl indicate their common origin and their introduction during serpentinization. The ratios Br/Cl,F/Cl, and I/Cl correspond to those of sediments that contain seawater which suggests that Cl, Br and I were partly expelled from deep sea sediments during emplacement of the ophiolite. Fluorine could have been derived from mantle material.Carbon occurs in fluid inclusions in olivines as CO2, CO or CH4 and/or submicroscopic graphite. The high C content in serpentinized dunites suggests that C, at least in part, is also of serpentinization origin.Chlorine is mainly incorporated into Fe-rich serpentines and Ca-amphiboles. Very low F concentration in hydrous phases is common, except in serpentines from pyroxenes, pargasites and edenites. Brucite is finely dispersed in serpentines derived from olivines, indicating low CO2-activity during brucite formation and a pH of about 11.The presence of Pt and Pd tellurides, arsenides and bismuthides and the absence of selenides, in spite of elevated Se concentrations in bulk analyses of about 5 ppm, indicates that the stability conditions for selenide formation were not obtained during alteration. The formation of Pt and Pd halogen complexes, requiring highly oxidizing (fO2 > hematite-magnetite boundary (HM)) and acid environments is not favoured for Pt and Pd transport in Acoje ultramafics. An redistribution caused by the solubility reduction of Pt and Pd by Te, Bi and As and a precipitation of their intermetallic phases is proposed. No correlation between Cl and PGE-bearing rock units was observed, which indicates the minor role of halogens during redistribution of Pt and Pd in the Acoje ophiolite.  相似文献   

7.
The influence of the mixtures HF‐HNO3 and HF‐NH4F‐HNO3 in bomb digestion for trace element determination from different rock types was studied using ICP‐MS. It is shown that the HF concentration, not the ratio of reagents in the decomposing mixture, controls the digestion process of a rock. Data for Zr in the granite G‐2 as a function of HF concentration gave the same results as reaction mixtures of various compositions. A complete digestion in 50‐mg sample bombs was achieved by 1.0 ml of HF alone, or with a mixture of other acids at a HF concentration of at least 35% m/m at 196 °C over 18 h. The results of the analysis of basalts BCR‐1, BIR‐1, mica schist SDC‐1, shale SBC‐1, granites G‐2, SG‐1A, garnet‐biotite plagiogneiss GBPg‐1, rhyolite RGM‐1, granodiorite GSP‐1, trachyandesite MTA‐1 and rhyolite MRh‐1 are given and compared against available data. The reproducibility of the element determinations by ICP‐MS and XRF as an independent non‐destructive analysis for a quality check in the range of concentrations typical for routine rock samples is given.  相似文献   

8.
The complete dissolution of representative test portions of powdered rock samples for the determination of the mass fractions of trace elements by ICP‐MS relies either on aggressive and time‐consuming acid digestions or fusion/sintering with appropriate fluxes. Here, we evaluate a microwave oven dissolution method that employs a solution of NH4HF2 and HNO3. The entire procedure occurs in a closed vessel system and takes up to 4 h. In hundreds of digestions, the precipitation of fluorides was never observed. Replicate decomposition of 100 mg of twenty‐one international reference materials (RMs) of igneous rocks, and also one of a shale presented mostly satisfactory recoveries of forty‐one trace elements. Important exceptions were Zr and Hf in G‐2 and GSP‐2 (mean recoveries of ca. 70%), although for four other felsic rock RMs, the digestion was complete. For ultramafic rock RMs, we present Cr results that indicate quantitative dissolution of Cr‐bearing phases. We discuss the findings and conclude that advances in sample preparation of geological materials for instrumental analysis would benefit from a better understanding of how specific characteristics, such as composition and crystallinity of certain minerals, may affect their reactivity.  相似文献   

9.
Rare earth elements (REEs) are very important to technological development as well as to geochemical and environmental studies. In this work, hydrofluoric acid (HF) was replaced by condensed phosphoric acid (CPA) in the digestion of geological samples, and the quantification of REEs was performed by inductively coupled plasma‐optical emission spectrometry (ICP‐OES). Six international reference materials (RMs), named DC86318, CGL 111, CGL 124, CGL 126, OKA‐2 and COQ‐1 and three Brazilian ore samples, named Araxá, Catalão and Pitinga were analysed. Only zircon and xenotime, which are potential REE‐bearing minerals, were not completely dissolved. Nevertheless, no REE associated with zircon was detected. The investigated digestion method presented many advantages: It was relatively fast (3 h), avoided fluoride precipitation, it was less hazardous because handling diluted H3PO4 is safer than HF, NH4F or NH4HF2 aqueous solutions, it preserved the quartz fittings of the measurement equipment and the final solution contained lower levels of total dissolved solids than those produced by the fusion method.  相似文献   

10.
采用HNO3-HClO4-HF常压消解、HNO3-H2O2-HF高压密闭消解、HNO3-H2O2微波消解,干法灰化后残渣用HNO3-HF-HClO4溶解等四种方法对植物样品进行前处理,使用电感耦合等离子体质谱(ICP-MS)对植物样品中的27种元素进行定量分析,探讨了不同前处理方法对ICP-MS测定植物样品中微量元素的影响。分析结果表明: HNO3-HClO4-HF常压消解使用大量试剂,污染环境,造成空白值高;在常压体系中HClO4的加入能提高样品的消解效率,但赶酸不完全,会造成复合离子对钒和砷的干扰;干法灰化过程中某些元素(硼、汞等)会损失;常压消解和高压密闭消解中加入HF能有效地提高铍、稀土、钇、钛、锑、铀等元素的回收率,但在蒸干赶HF的过程中,会造成硼和汞的损失,并且钢套的生锈会造成铬、镍空白值高。尽管没有一种方法能适用于所有元素的分析,但相比较而言,HNO3-H2O2微波消解体系操作简单,大部分元素(除铍、钛、锑、铋、稀土)能得到满意的结果,精密度(RSD)均小于10%(n=10),相对误差(RE)为-4.6%~13.6%。  相似文献   

11.
In this paper, a method developed to determine the major, minor and trace elements, including carbon and the four halogens, in seamount phosphorite involving a modern XRF spectrometry technique is described. Ultra-fine (99% v/v < 40 μm) powder samples (4 g) were directly pressed into pellets (Φ= 30 mm). For elements having an analytical line lower in energy than the energy of Fe Kα line absorption edge, the inter-element absorption-enhancement effects were corrected using an influence coefficient method. For the other elements, the matrix effects were corrected using the ratio of element peak to Rh Kα Compton peak (for I, Rh K|3 Compton peak was used instead). The relative standard deviation was smaller than 1.0% for the major elements (except C, Na and Cl). The detection limit levels of C, F, Cl, Br and I were 30, 20, 0.8, 0.2 and 0.3 (μg g−1 respectively for 100 s count time of background. The accuracy of this method was tested by evaluating determinations on three certified reference materials. The direct analysis of major and minor elements in geological materials by pressed pellet without any chemical procedures makes XRF spectrometry a particularly environment-friendly analytical technique.  相似文献   

12.
The authors report here halogen concentrations in pore waters and sediments collected from the Mallik 5L-38 gas hydrate production research well, a permafrost location in the Mackenzie Delta, Northwest Territories, Canada. Iodine and Br are commonly enriched in waters associated with CH4, reflecting the close association between these halogens and source organic materials. Pore waters collected from the Mallik well show I enrichment, by one order of magnitude above that of seawater, particularly in sandy layers below the gas hydrate stability zone (GHSZ). Although Cl and Br concentrations increase with depth similar to the I profile, they remain below seawater values. The increase in I concentrations observed below the GHSZ suggests that I-rich fluids responsible for the accumulation of CH4 in gas hydrates are preferentially transported through the sandy permeable layers below the GHSZ. The Br and I concentrations and I/Br ratios in Mallik are considerably lower than those in marine gas hydrate locations, demonstrating a terrestrial nature for the organic materials responsible for the CH4 at the Mallik site. Halogen systematics in Mallik suggest that they are the result of mixing between seawater, freshwater and an I-rich source fluid. The comparison between I/Br ratios in pore waters and sediments speaks against the origin of the source fluids within the host formations of gas hydrates, a finding compatible with the results from a limited set of 129I/I ratios determined in pore waters, which gives a minimum age of 29 Ma for the source material, i.e. at the lower end of the age range of the host formations. The likely scenario for the gas hydrate formation in Mallik is the derivation of CH4 together with I from the terrestrial source materials in formations other than the host layers through sandy permeable layers into the present gas hydrate zones.  相似文献   

13.
Primary multiphase brine fluid inclusions in omphacite and garnet from low‐ to medium‐temperature eclogites have been analysed for Cl, Br, I, F, Li and SO4. Halogen contents and ratios provide information about trapped lower crustal fluids, even though the major element (Na, K, Ca) contents of inclusion fluids have been modified by fluid–mineral interactions and (step‐) daughter‐crystal formation after trapping. Halogens in the inclusion fluids were analysed with crush–leach techniques. Cl/Br and Cl/I mass ratios of eclogite fluids are in the range 31–395 and 5000–33 000, respectively. Most fluids have a Cl/Br ratio lower than modern seawater and a Cl/I ratio one order of magnitude lower than modern seawater. Fluids with the lowest Cl/Br and highest Cl/I ratios come from an eclogite that formed by hydration of granulite facies rocks, and may indicate that Br and I are fractionated into hydrous minerals. Reconstructions indicate that the inclusion fluids originally contained 500–4000 ppm Br, 1–14 ppm I and 33–438 ppm Li. Electron microprobe analyses of eclogite facies amphibole, biotite, phengite and apatite indicate that F and Cl fractionate most strongly between phengite (F/Cl mass ratio of 1469 ± 1048) and fluid (F/Cl mass ratio of 0.008), and the least between amphibole and fluid. The chemical evolution of Cl and Br in pore fluids during hydration reactions is in many ways analogous to Cl and Br in seawater during evaporation: the Cl/Br ratio remains constant until the aH2O value is sufficiently lowered for Cl to be removed from solution by incorporation into hydrous minerals.  相似文献   

14.
万山汞矿卤素元素地球化学特征及其地质意义   总被引：5，自引：1，他引：4  
本文对万山汞放卤素元素地球化学特征进行了较系统的研究。研究表明,Ｂｒ与１在矿区赋矿城、蚀变岩及矿石中都不同程度富集,从赋矿围岩→蚀变岩→矿石,含量明显升高,而Ｆ与Ｃｌ主要富集于蚀变岩石中,在隐伏矿体上部围岩中,Ｆ、Ｃｌ、Ｂｒ、１都有异常显示,这种卤素元素异常对寻找隐伏矿体具有指示意义。  相似文献   

15.
In this contribution, we report Hf isotopic data and Lu and Hf mass fractions for thirteen Chinese rock reference materials (GBW07 103–105, 109–113 and 121–125, that is GSR 1–3, 7–11 and 14–18, respectively) that span a broad compositional range. Powdered samples were spiked with a 176Lu‐180Hf enriched tracer and completely digested using conventional HF, HNO3 and HClO4 acid dissolution protocols. Fluoride salts were dissolved during a final H3BO3 digestion, and chemical purification was performed using a single Ln resin. All measurements were carried out on a MC‐ICP‐MS. This work provides the first comprehensive report of the Lu‐Hf isotopic composition of Chinese geochemical rock reference materials, and results indicate that they are of comparable quality to the well‐characterised and widely used USGS and GSJ rock reference materials.  相似文献   

16.
董学林  何海洋  储溱  宋洲 《岩矿测试》2019,38(5):575-582
由于聚合态的硅酸无法与钼酸根定量络合,采用硅钼蓝比色分光光度法测定地质样品中的硅,其关键在于如何将固体试样消解制备成溶液且保证硅酸全部以单分子状态存在。本文以氢氟酸-硝酸封闭酸溶消解地质样品,使样品中的硅完全转化为氟硅酸稳定存在于溶液中;再加入硼酸和钼酸铵,使过量的氢氟酸与硼酸生成稳定的BF~-_4配离子,此步骤代替了蒸干赶除氢氟酸,从而避免了赶酸过程中硅与氟离子转化为气态SiF_4而挥发损失,在钼酸铵作用下,硅则充分转变为硅钼杂多酸。在显色过程中通过加入丙酮显著提高了硅钼黄的稳定性,且在一定程度上增加了吸光度,从而改善了硅钼蓝分光光度法测定硅的显色效果。该方法避免了常规碱熔消解样品后在酸化过程中硅酸易聚合、引入大量熔剂造成空白偏高等问题,经岩石、土壤、沉积物和石英岩国家标准物质分析验证,SiO_2测试结果准确且重现性好(RSD1%,n=10),适用于一般地质样品中硅的快速、准确分析。  相似文献   

17.
Sample digestion is a critical stage in the process of chemical analysis of geological materials by ICP‐MS. We present a new HF/HNO3 procedure to dissolve silicate rock samples using a high pressure asher system. The formation of insoluble AlF3 was the major obstacle in achieving full recoveries. This was overcome by setting an appropriate digestion temperature and adding Mg to the samples before digestion. Sodium peroxide sintering was also investigated and the inclusion of a heating step to the alkaline sinter solution improved the recoveries of thirteen elements other than the lanthanides. The results of these procedures were compared with data sets generated by common acid decomposition techniques. Forty‐one trace elements were determined using an ICP‐QMS equipped with a collision cell. Under optimum conditions of gas flow and kinetic energy discrimination, polyatomic interferences were eliminated or attenuated. The measurement bias obtained for eight reference materials (BCR‐2, BHVO‐2, BIR‐1, BRP‐1, OU‐6, GSP‐2, GSR‐1 and RGM‐1) and intermediate precision (RSD) were generally better than ± 5%. The expanded measurement uncertainties estimated for two certified reference materials were mostly between 7 and 15%. New data sets for the reference materials are provided, including constituents with previously unavailable values and also for the USGS candidate reference material G‐3.  相似文献   

18.
微波酸溶消解方法是测定固体废物中金属元素最主要的前处理方法,消解时使用不同的酸体系对测定结果有较大的影响。本文以国家土壤标准样品、固体废物标准样品和固体废物实际样品为材料,比较了在硝酸-盐酸、硝酸-氢氟酸、硝酸-盐酸-双氧水、硝酸-盐酸-氢氟酸-双氧水4种酸体系下,16种金属元素测定结果的差异以及在硝酸-盐酸和硝酸-盐酸-氢氟酸-双氧水酸体系下各元素的精密度和准确度。研究表明:一些土壤基体中加入氢氟酸能使Mo和Sb的回收率提高40%左右,固体废物样品中只有Sb的回收率能提高33%~50%。对于含氢氟酸的酸消解体系,改变硝酸和盐酸的比例,其测定结果没有明显差异;对于元素含量相差悬殊的铬渣样品,由于空间电荷效应,高浓度的Cr对V的测定有抑制作用。从方法的准确度和精密度来看,硝酸-氢氟酸-盐酸-双氧水的消解效果最好。  相似文献   

19.
A method to determine F and Cl in silicate materials by employing pyrohydrolysis and ion chromatography (IC) is described. Pyrohydrolysis involved mixing a pulverised sample (∼ 40 mg) with V2O5 (∼ 160 mg) and heating to 1100 °C under a wet oxygen flow in a quartz tube. Recovery yields of F and Cl were ∼ 97% using a NaF + NaCl standard solution. Detection limits of the pyrohydrolysis-IC method for silicate samples were 0.36 and 0.69 μg g-1 for F and Cl, respectively. Fluorine and Cl concentrations were determined in the reference materials JB-2, JB-3 and JA-1 from the GSJ; BCR-2, BHVO-1, BHVO-2, AGV-1 and AGV-2 from the USGS; and NIST SRM 610, 612 and 614 glasses. Precisions (RSD) for determinations of F were 1–13% (except NIST SRM 614) and 2–19% for Cl, and were dependent on the concentration and blank correction. Most results obtained in this study were in good agreement with those of previous studies. In comparison, the Na2CO3 + ZnO fusion method at 900 °C showed that the yields of F and Cl by alkaline fusion systematically decreased with fusion duration time. The yields were 84% and 83% for JB-3, inferring that F and Cl were lost in this alkaline fusion.  相似文献   

20.
Fluorine, chlorine, bromine, iodine and sulfur were determined in seventeen geological reference materials after extraction by pyrohydrolysis. Fluorine, Cl and S (as sulfate ions) were determined in the extraction solution by ion chromatography with detection limits of around 0.2 mg l−1. Bromine and I were measured by ICP-MS with detection limits of 1 μg l−1 for Br and 0.1 μg l−1 for I. For rock samples, using normal extraction conditions (500 mg of sample and 100 ml of final solution) detection limits were 40 mg kg−1 for F and Cl, 15 mg kg−1 for S, 0.2 mg kg−1 for Br and 0.02 mg kg−1 for I. These detection limits may be improved by increasing the amount of sample and hence the concentration of the final solution. Water was also determined using an extraction technique based on H2O degassing, reduction on zinc at 1000 °C and H2 manometry. Our results for fluorine, chlorine, sulfur and water are in good agreement with literature data. Very few reference materials have recommended values for bromine and especially for iodine. Among the analysed samples, three are new reference materials: BHVO-2, BCR-2 and AGV-2.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号