首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 60 毫秒
1.
This paper is concerned with the modelling of the behaviour of steel under cyclic and dynamic loading conditions. After a general discussion regarding the requirements for accurate and efficient modelling in dynamics, two models are described and implemented. The bilinear stress-strain constitutive relationship with kinematic hardening is widely used in many computer codes, hence is used for ‘control’ purposes. The multisurface plasticity model is said to exhibit the important qualities of strain hardening, softening and relaxation to a mean stress. This model is described in detail and notes on model parameter evaluation are given. A number of validation examples are presented, due to the complexity of implementation of the multisurface formulation. This is followed by comparisons between the bilinear response predictions and those of the multisurface model for cyclic and dynamic tests on beam-columns. It is concluded that in the absence of material test data under cyclic loading, the bilinear model provides acceptably accurate response predictions. However, the multisurface model provides a significantly closer fit to experimental results, due to its ability to model a yield plateau and a non-linear strain-hardening regime as well as cyclic degradation. It can also be used for new types of steel where no distinct yield point is observed.  相似文献   

2.
The last decade of performance‐based earthquake engineering (PBEE) research has seen a rapidly increasing emphasis placed on the explicit quantification of uncertainties. This paper examines uncertainty consideration in input ground‐motion and numerical seismic response analyses as part of PBEE, with particular attention given to the physical consistency and completeness of uncertainty consideration. It is argued that the use of the commonly adopted incremental dynamic analysis leads to a biased representation of the seismic intensity and that when considering the number of ground motions to be used in seismic response analyses, attention should be given to both reducing parameter estimation uncertainty and also limiting ground‐motion selection bias. Research into uncertainties in system‐specific numerical seismic response analysis models to date has been largely restricted to the consideration of ‘low‐level’ constitutive model parameter uncertainties. However, ‘high‐level’ constitutive model and model methodology uncertainties are likely significant and therefore represent a key research area in the coming years. It is also argued that the common omission of high‐level seismic response analysis modelling uncertainties leads to a fallacy that ground‐motion uncertainty is more significant than numerical modelling uncertainty. The author's opinion of the role of uncertainty analysis in PBEE is also presented. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

3.
Different modelling aspects of structures isolated using the frictional pendulum system and subjected to earthquake ground motions are studied herein. Although the vertical dynamics of these structures is given special emphasis, other effects such as large isolator deformations and bidirectional input motion are also considered. Different structural models of the FPS are developed and tested for single-storey structures and a real four-storey building frame; among them, an ‘exact’ formulation of the FPS force–deformation constitutive relationship is presented. Results show that global building responses can be computed within 20 per cent error in the mean using a simplified model that ignores the vertical motion of the building; however, structural member deformations and forces need to be computed using a model that considers such motion. This is of particular importance when there exist correlation between the horizontal and vertical components of ground motion. Further, a physical model of the FPS is introduced and used to determine the response of a real four-storey frame, including uplift and downward impact. Results from this analysis show that local column responses may vary substantially depending on the stiffness of the isolation storey and the presence of a mass at the isolation level. Such mass is capable of filtering the large increase in column shear that results from the impact of the structure after uplift. Uplift occurs at several instants of the response of the structure considered, leading to an increase in column base shear as large as 3 times the shear obtained by ignoring the vertical dynamics of the building. © 1998 John Wiley & Sons, Ltd.  相似文献   

4.
Simple methods of analysis are developed for computing the dynamic steady-state axial response of floating pile groups embedded in homogeneous and non-homogeneous soil deposits. Physically-motivated approximations are introduced to account for the interaction between two individual piles. It is found that such an interaction arises chiefly from the ‘interference’ of wave fields originating along each pile shaft and spreading outward. For homogeneous deposits the wave fronts originating at an individual pile are cylindrical and the interaction is essentially independent of pile flexibility and slenderness. For non-homogeneous deposits the wave fronts are non-cylindrical and ray-theory approximations are invoked to derive pile flexibility-dependent interaction functions. Results are presented for the dynamic stiffness and damping of several pile groups, as well as for distribution of the applied load among individual piles. For deposits with modulus proportional to depth, the agreement with the few rigorous solutions available is encouraging. A comprehensive parameter study focuses on the effects of soil inhomogeneity and pile-group configuration. It is demonstrated that the ‘dynamic group efficiency’ may far exceed unity at certain frequencies. Increasing soil inhomogeneity tends to reduce the respective resonant peaks and lead to smoother interaction functions, in qualitative agreement with field evidence.  相似文献   

5.
Deformation of rock: A pressure-sensitive,dilatant material   总被引：5，自引：0，他引：5  
  相似文献   

6.
The terms ‘downward’ and ‘upward’ (synonymous with ‘top‐down’ and ‘bottom‐up’ respectively) are sometimes used when describing methods for developing hydrological models. A downward approach is used here to develop a lumped catchment‐scale model for subsurface stormflow at the 0·94 km2 Slapton Wood catchment. During the development, as few assumptions as possible are made about the behaviour of subsurface stormflow at the catchment scale, and no assumptions are made about its behaviour at smaller scales. (In an upward approach, in contrast, the modelling would be based on assumptions about, and data for, the behaviour at smaller scales, such as the hillslope, plot, and point scales.) The model has a single store with a relatively simple relationship between discharge and storage, based on equations describing hysteretic patterns seen in a graph of discharge against storage. Double‐peaked hydrographs have been observed at the catchment outlet. Rainfall on the channel and infiltration‐excess and saturation‐excess runoff give a rapid response, and shallow subsurface stormflow gives a delayed response. Hydrographs are successfully simulated for the large delayed responses observed in 1971–1980 and 1989–1991, then a lumped model for the rapid response is coupled to the lumped hysteretic model and some double‐peaked hydrographs simulated. A physical interpretation is developed for the lumped hysteretic model, making use of information on patterns of perched saturation observed in 1982 on a hillslope at the Slapton Wood catchment. Downward and upward approaches are complementary, and the most robust way to develop and improve lumped catchment models is to iterate between downward and upward steps. Possible next steps are described. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

7.
One of the major aspects of rock-physics forward modelling is to predict seismic behaviour at an undrilled location using drilled well data. It is important to model the rock and fluid properties away from drilled wells to characterize the reservoir and investigate the root causes of different seismic responses. Using the forward modelling technique, it is possible to explain the amplitude responses of present seismic data in terms of probable rock and reservoir properties. In this context, rock-physics modelling adds significant values in the prospect maturation process by reducing the risk of reservoir presence in exploration and appraisal phases. The synthetic amplitude variation with offset gathers from the forward model is compared with real seismic gathers to ensure the fidelity of the existing geological model. ‘Prospect A’ in the study area has been identified from seismic interpretation, which was deposited as slope fan sediments in Mahanadi basin, East Coast of India. The mapped prospect has shown class-I amplitude variation with offset response in seismic without any direct hydrocarbon indicator support. The existing geological model suggests the presence of an excellent gas reservoir with proven charge access from the fetch area, moderate porosity and type of lithology within this fan prospect. But, whether the seismic response from this geological model will exhibit a class-I amplitude variation with offset behaviour or ‘dim spot’ will be visible; the objective of the present study is to investigate these queries. A rock-physics depth trend analysis has been done to envisage the possibilities of class-I reservoir in ‘Prospect A’. Forward modelling, using a combination of mechanical and chemical compaction, shows the synthetic gas gathers at ‘Prospect A’, which are class I in nature. The study has also depicted 2D forward modelling using lithology and fluid properties of discovery well within similar stratigraphy to predict whether ‘dim spot’ will be seen in seismic. The estimated change in synthetic amplitude response has been observed as ∼5% at contact, which suggests that the changes will not be visible in seismic. The study connects the existing geological model with a top-down seismic interpretation using rock-physics forward modelling technique to mature a deep-water exploratory prospect.  相似文献   

8.
The experimental work and first results of a recently completed experimental research programme investigating the response of reinforced concrete (RC) walls under earthquake (EQ) loading are discussed in this paper. A brief literature review is given as a prelude to the outline of research objectives. The tests are presented in two groups according to the scale of models. For the 1:5 scale tests, a modified similitude relation for small scale reinforced concrete dynamic modelling is developed. Based on the chosen model parameters, the design of the isolated RC walls is given. The test-rig set-up and the EQ input signals suitable for testing the model on the Imperial College shake-table are also discussed. Preliminary observations regarding stiffness, strength and failure modes of the RC wall models are given. Experimental results from the shake-table are compared to tests, at the same scale, under static cyclic conditions. For the scale 1:2–5 cyclic tests a different test-rig assembly is designed. The test results are given in three pairs of flexurally similar walls followed with general observations and discussion. Finally, conclusions are drawn regarding experimental procedures and behaviour patterns of the tested models.  相似文献   

9.
Timber-framed (TF) masonry has been developed as an effective lateral-load resisting system in regions of high seismicity such as Southern Europe. A salient feature of the ‘last generation’ of TF buildings is the presence of diagonal members that may consist of two diagonal braces. The present study focusses on alternative modelling procedures, ranging from simple to rather complex, for this interesting type of traditional structure. All models are applied to study the behaviour of full-scale specimens of diagonally-braced TF panels. The complex model is based on plasticity with contact surfaces for the connection between timber diagonals and masonry infills. A parametric analysis using this model shows that masonry infills affect only slightly the lateral force carried by this TF panel configuration. Furthermore, two simple modelling techniques are put forward for application in the analysis of large, realistic structures incorporating TF walls. The first one is directly connected to the complex modelling and is based on substructuring. A nine-step procedure is developed and is found to properly reproduce the response of the test specimens. The second simple model is a phenomenological one, developed on the basis of observed behaviour during tests and is a complete hysteretic model; however, for comparison purposes, all models are evaluated here with respect to the prediction of the envelope (pushover) curve for the walls tested under lateral loads.  相似文献   

10.
Optimization of multi-phase transport models is important both for calibrating model parameters to observed data and for analyzing management options. We focus on examples of geological carbon sequestration (GCS) process-based multi-phase models. Realistic GCS models can be very computationally expensive not only due to the spatial distribution of the model but also because of the complex nonlinear multi-phase and multi-component transport equations to be solved. As a result we need to have optimization methods that get accurate answers with relatively few simulations. In this analysis we compare a variety of different types of optimization algorithms to understand the best type of algorithms to use for different types of problems. This includes an analysis of which characteristics of the problem are important in choice of algorithm. The goal of this paper is to evaluate which optimization algorithms are the most efficient in a given situation, taking into account shape of the optimization problem (e.g. uni- or multi-modal) and the number of simulations that can be done. The algorithms compared are the widely used derivative-based PEST optimization algorithm, the derivative-based iTOUGH2, the Kriging response surface algorithm EGO, the heuristics-based DDS (Dynamically Dimensioned Search), and the Radial Basis Function surrogate response surface based global optimization algorithms ‘GORBIT’ and ‘Stochastic RBF’. We calibrate a simple homogeneous model ‘3hom’ and two more realistic models ‘20layer’ and ‘6het’. The latter takes 2 h per simulation. Using rigorous statistical tests, we show that while the derivative-based algorithms of PEST are efficient on the simple 3hom model, it does poorly in comparison to surrogate optimization methods Stochastic RBF and GORBIT on the more realistic models. We then identify the shapes of the optimization surface of the three models using enumerative simulations and discover that 3hom is smooth and unimodal and the more realistic models are rough and multi-modal. When the number of simulations is limited, surrogate response surfaces algorithms perform best on multi-modal, bumpy objective functions, which we expect to have for most realistic multi-phase flow models such as those for GCS.  相似文献   

11.
A recently developed earthquake ground motion model non-stationary in both intensity and frequency content is validated at the inelastic Single-Degree-Of-Freedom (SDOF) structural response level. For the purpose of this study, the earthquake model is calibrated for two actual earthquake records. The objective of a constant (or target) displacement ductility used in conventional earthquake-resistant design is examined from the statistical viewpoint using this non-stationary earthquake model. The non-linear hysteretic structural behaviour is modelled using several idealized hysteretic SDOF structural models. Ensemble-average inelastic response spectra corresponding to various inelastic SDOF response (or damage) parameters and conditioned on a constant displacement ductility response are derived from the two identified stochastic ground motion models. The effects of the type of hysteretic behaviour, the structural parameters, the target displacement ductility factor, and the ground motion model on the statistics of the inelastic response parameters are thoroughly investigated. The results of this parametric study shed further light on the proper interpretation and use of inelastic response or damage parameters in earthquake-resistant design in order to achieve the desirable objective of ‘constant-damage design’. © 1997 by John Wiley & Sons, Ltd.  相似文献   

12.
  相似文献   

13.
  相似文献   

14.
Dynamic response of dams is significantly influenced by foundation stiffness and dam-foundation interaction. This in turn, significantly effects the generation of hydrodynamic pressures on upstream face of a concrete dam due to inertia of reservoir water. This paper aims at investigating the dynamic response of dams on soil foundation using dynamic centrifuge modelling technique. From a series of centrifuge tests performed on model dams with varying stiffness and foundation conditions, significant co-relation was observed between the dynamic response of dams and the hydrodynamic pressures developed on their upstream faces. The vertical bearing pressures exerted by the concrete dam during shaking were measured using miniature earth pressure cells. These reveal the dynamic changes of earth pressures and changes in rocking behaviour of the concrete dam as the earthquake loading progresses. Pore water pressures were measured below the dam and in the free-field below the reservoir. Analysis of this data provides insights into the cyclic shear stresses and strains generated below concrete dams during earthquakes. In addition, the sliding and rocking movement of the dam and its settlement into the soil below are discussed.  相似文献   

15.
Recognizing that soil–structure interaction affects appreciably the earthquake response of highway overcrossings, this paper compares approximate analytical solutions and finite element results to conclude on a simple procedure that allows for the estimation of the kinematic response functions and dynamic stiffnesses of approach embankments. It is shown that the shear‐wedge model yields realistic estimates for the amplification functions of typical embankments and reveals the appropriate levels of dynamic strains which are subsequently used to estimate the stiffness and damping coefficients of embankments. The shear‐wedge model is extended to a two‐dimensional model in order to calculate the transverse static stiffness of an approach embankment loaded at one end. The formulation leads to a sound closed‐form expression for the critical length, Lc, that is the ratio of the transverse static stiffness of an approach embankment and the transverse static stiffness of a unit‐width wedge. It is shown through two case studies that the transverse dynamic stiffness (‘spring’ and ‘dashpot’) of the approach embankment can be estimated with confidence by multiplying the dynamic stiffness of the unit‐width wedge with the critical length, Lc. The paper concludes that the values obtained for the transverse kinematic response function and dynamic stiffness can also be used with confidence to represent the longitudinal kinematic response function and dynamic stiffness, respectively. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

16.
The work presented is aimed at the investigation of the influence of beam‐to‐column connections on the seismic response of MR‐Frames, with and without ‘set‐backs’, designed according to the Theory of Plastic Mechanism Control. The investigated connection typologies are four partial strength connections whose structural details have been designed to obtain the same flexural resistance. The first three joints are designed by means of hierarchy criteria based on the component approach and are characterized by different location of the weakest joint component, leading to different values of joint rotational stiffness and plastic rotation supply and affecting the shape of the hysteresis loops governing the dissipative capacity. The last typology is a beam‐to‐column connection equipped with friction pads devoted to the dissipation of the earthquake input energy, thus preventing the connection damage. An appropriate modelling is needed to accurately represent both strength and deformation characteristics, especially with reference to partial‐strength connections where the dissipation of the earthquake input energy occurs. To this aim, beam‐to‐column joints are modelled by means of rotational inelastic springs located at the ends of the beams whose moment‐rotation curve is characterized by a cyclic behaviour which accounts for stiffness and strength degradation and pinching phenomena. The parameters characterizing the cyclic hysteretic behaviour have been calibrated on the base of experimental results aiming to the best fitting. Successively, the prediction of the structural response of MR‐Frames, both regular frames and frames with set‐backs, equipped with such connections has been carried out by means of both push‐over and Incremental Dynamic Analyses. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

17.
This paper is a study of idealizing a planar reinforced concrete frame as a non-linear dynamic system for the purpose of simulating its inelastic behaviour during severe earthquakes. After having estimated the restoring force characteristics of all constituent members by experimental means (represented, for example, by a group of empirical equations), it is possible to estimate the non-linear characteristics of the complete structure and to trace the damaging process for each constituent member under a given ground motion disturbance. However, this technique, which is directly based on member-level properties, generally requires rather laborious computational procedures; for practical reasons it is necessary to develop a simplified model, reducing the required calculation without losing the substance of the mechanical phenomena. Thus the reliability of simplification by conventional shear modelling is examined in direct comparison with the response results from rigorous modelling. It is concluded that the shear modelling generally yields an inadequate and, in many cases, erroneous result. The primary cause leading to this discrepancy is identified and, based on this discussion, a more appropriate modelling as simple as conventional shear modelling is proposed.  相似文献   

18.
Analytical models prepared from field drawings do not generally provide results that match with experimental results.The error may be due to uncertainties in the property of materials,size of members and errors in the modelling process.It is important to improve analytical models using experimentally obtained data.For the past several years,data obtained from ambient vibration testing have been successfully used in many cases to update and match dynamic behaviors of analytical models with real structures.This paper presents a comparison between artificial neural network(ANN) and eigensensitivity based model updating of an existing multi-story building.A simple spring-mass analytical model,developed from the structural drawings of the building,is considered and the corresponding spring stiffness and lumped mass of all floors are chosen as updating parameters.The advantages and disadvantages of these updating methods are discussed.The advantage is that both methods ensure a physically meaningful model which canbe further employed in determining structural response and health monitoring.  相似文献   

19.
A framework for the validation of computational models used to predict seismic response based on observations from seismometer arrays is presented. The framework explicitly accounts for the epistemic uncertainty related to the unknown characteristics of the ‘site’ (i.e. the problem under consideration) and constitutive model parameters. A mathematical framework which makes use of multiple prediction–observation pairs is used to improve the statistical significance of inferences regarding the accuracy and precision of the computational methodology and constitutive model. The benefits of such a formal validation framework include: (i) development of consistent methods for determination of constitutive model parameters; (ii) rigorous, objective, and unbiased assessment of the validity of various constitutive models and computational methodologies for various problem types and ground motion intensities; and (iii) an improved understanding of the uncertainties in computational model assumptions, constitutive models and their parameters, relative to other seismic response uncertainties such as ground motion variability. Details regarding the implementation of such a framework to achieve the aforementioned benefits are also addressed.  相似文献   

20.
The peak dynamic responses of two mathematical models of a fifteen-storey steel moment resisting frame building subjected to three earthquake excitations are computed by the response spectrum and time history methods. The models examined are: a ‘regular’ building in which the centres of stiffness and mass are coincident resulting in uncoupled modes with well-separated periods in each component direction of response; and an ‘irregular’ building with the mass offset from the stiffness centre of the building causing coupled modes with the translational modes having closely spaced periods. Four response spectrum modal combination rules are discussed and are used to predict the peak responses: (1) the square root of the sum of the squares (SRSS) method; (2) the double sum combination (DSC) method; (3) the complete quadratic combination (CQC) method; and (4) the absolute sum (ABS) method. The response spectrum results are compared to the corresponding peak time history values to evaluate the accuracy of the different combination rules. The DSC and the CQC methods provide good peak response estimates for both the regular and irregular building models. The SRSS method provides good peak response estimates for the regular building, but yields significant errors in the irregular building response estimates. The poor accuracy in the irregular building results is attributable to the effects of coupled modes with closely spaced periods. It is concluded that the DSC and CQC methods produce response estimates of equivalent accuracy. Both methods are recommended for general use. In addition to the DSC and CQC rules, the SRSS method is recommended for systems where coupled modes with closely spaced periods do not dominate the response.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号