共查询到20条相似文献，搜索用时 312 毫秒
1.
Forest structural diversity metrics describing diversity in tree size and crown shape within forest stands can be used as indicators of biodiversity. These diversity metrics can be generated using airborne laser scanning (LiDAR) data to provide a rapid and cost effective alternative to ground-based inspection. Measures of tree height derived from LiDAR can be significantly affected by the canopy conditions at the time of data collection, in particular whether the canopy is under leaf-on or leaf-off conditions, but there have been no studies of the effects on structural diversity metrics. The aim of this research is to assess whether leaf-on/leaf-off changes in canopy conditions during LiDAR data collection affect the accuracy of calculated forest structural diversity metrics. We undertook a quantitative analysis of LiDAR ground detection and return height, and return height diversity from two airborne laser scanning surveys collected under leaf-on and leaf-off conditions to assess initial dataset differences. LiDAR data were then regressed against field-derived tree size diversity measurements using diversity metrics from each LiDAR dataset in isolation and, where appropriate, a mixture of the two. Models utilising leaf-off LiDAR diversity variables described DBH diversity, crown length diversity and crown width diversity more successfully than leaf-on (leaf-on models resulted in R² values of 0.66, 0.38 and 0.16, respectively, and leaf-off models 0.67, 0.37 and 0.23, respectively). When LiDAR datasets were combined into one model to describe tree height diversity and DBH diversity the models described 75% and 69% of the variance (R² of 0.75 for tree height diversity and 0.69 for DBH diversity). The results suggest that tree height diversity models derived from airborne LiDAR, collected (and where appropriate combined) under any seasonal conditions, can be used to differentiate between simple single and diverse multiple storey forest structure with confidence. 相似文献
2.
Estimates of canopy closure have many important uses in forest management and ecological research. Field measurements, however, are typically not practical to acquire over expansive areas or for large numbers of locations. This problem has been addressed, in recent years, through the use of airborne light detection and ranging (LiDAR) technology which has proven effective in modeling canopy closure remotely. The techniques developed to use LiDAR for this purpose have been designed and evaluated for datasets acquired during leaf-on conditions. However, a large number of LiDAR datasets are acquired during leaf-off conditions since their primary purpose is to generate bare-earth Digital Elevation Models. In this paper, we develop and evaluate techniques for leveraging small-footprint leaf-off LiDAR data to model leaf-on canopy closure in temperate deciduous forests.We evaluate three techniques for modeling canopy closure: (1) the canopy-to-total-return-ratio (CTRR), (2) the canopy-to-total-pixel-ratio (CTPR), and (3) the hemispherical-viewshed (HV). The first technique has been used widely, in various forms, and has been shown to be effective with leaf-on LiDAR datasets. The CTRR technique that we tested uses the first-return LiDAR data only. The latter two techniques are new contributions that we develop and present in this paper. These techniques use Canopy Height Models (CHM) to detect significant gaps in the forest canopy which are of primary importance in estimating closure.The techniques we tested each showed good promise for predicting canopy closure using leaf-off LiDAR data with the CTPR and HV models having particularly high correlations with closure estimates from hemispherical photographs. The CTRR model had performance on par with results from previous studies that used leaf-on LiDAR, although, with leaf-off data the model tended to be negatively biased with respect to species having simple and compound leaf types and positively biased for coniferous species. The CTPR and HV models also showed some slight negative biases for compound-leaf species. The biases for the CTPR and HV models were mitigated when the CHM data were smoothed to fill in small gaps. The CHM-based models were robust to changes in the CHM model resolution which suggests that these methods may be applicable to a variety of small-footprint LiDAR datasets. In this research, the new CTPR and HV methods showed a strong ability to predict canopy closure using leaf-off data, however, future work will be needed to test the applicability of the models to variations in LiDAR datasets, forest types, and topography. 相似文献
3.
J. Reitberger Cl. Schnörr P. Krzystek U. Stilla 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(6):561-574
This paper highlights a novel segmentation approach for single trees from LIDAR data and compares the results acquired both from first/last pulse and full waveform data. In a first step, a conventional watershed-based segmentation procedure is set up, which robustly interpolates the canopy height model from the LIDAR data and identifies possible stem positions of the tallest trees in the segments calculated from the local maxima of the canopy height model. Secondly, this segmentation approach is combined with a special stem detection method. Stem positions in the segments of the watershed segmentation are detected by hierarchically clustering points below the crown base height and reconstructing the stems with a robust RANSAC-based estimation of the stem points. Finally, a new three-dimensional (3D) segmentation of single trees is implemented using normalized cut segmentation. This tackles the problem of segmenting small trees below the canopy height model. The key idea is to subdivide the tree area in a voxel space and to set up a bipartite graph which is formed by the voxels and similarity measures between the voxels. Normalized cut segmentation divides the graph hierarchically into segments which have a minimum similarity with each other and whose members (= voxels) have a maximum similarity. The solution is found by solving a corresponding generalized eigenvalue problem and an appropriate binarization of the solution vector. Experiments were conducted in the Bavarian Forest National Park with conventional first/last pulse data and full waveform LIDAR data. The first/last pulse data were collected in a flight with the Falcon II system from TopoSys in a leaf-on situation at a point density of 10 points/m2. Full waveform data were captured with the Riegl LMS-Q560 scanner at a point density of 25 points/m2 (leaf-off and leaf-on) and at a point density of 10 points/m2 (leaf-on). The study results prove that the new 3D segmentation approach is capable of detecting small trees in the lower forest layer. So far, this has been practically impossible if tree segmentation techniques based on the canopy height model were applied to LIDAR data. Compared to a standard watershed segmentation procedure, the combination of the stem detection method and normalized cut segmentation leads to the best segmentation results and is superior in the best case by 12%. Moreover, the experiments show clearly that using full waveform data is superior to using first/last pulse data. 相似文献
4.
激光雷达森林参数反演研究进展 总被引：6，自引：0，他引：6
激光雷达通过发射激光能量和接收返回信号的方式,来获取高精度的森林空间结构和林下地形信息。全波形激光雷达通过记录返回信号的全部能量,得到亚米级植被垂直剖面;离散回波激光雷达记录的单个或多个回波,表示来自不同冠层的回波信号。星载激光雷达一般采用全波形或光子计数激光剖面系统,仅能获取卫星轨道下方的单波束或多波束数据,用于区域/全球范围的森林垂直结构及变化观测。机载激光雷达多采用离散回波或全波形激光扫描系统,能够获取飞行轨迹下方特定视场范围内的扫描数据,用于林分/区域范围的森林结构观测。地基激光雷达多采用离散回波激光扫描系统,获取以测站为中心的球形空间内扫描数据,用于单木/样地范围的森林结构观测。激光雷达单木因子估测方法可分为CHM单木法、NPC单木法和体元单木法3类。CHM单木法通过局部最大值识别树冠顶点,采用区域生长或图像分割算法识别树冠边界或树冠主方向,NPC单木法一般通过空间聚类或形态学算法识别单木,体元单木法在3维体元空间采用区域生长或空间聚类算法识别树冠。根据激光雷达冠层高度分布可以估测林分因子,冠层高度分布特征来自于离散点云或全波形。多时相激光雷达可用于森林生长量、生物量变化等监测,以及森林采伐、灾害等引起的结构变化监测。随着激光雷达技术的发展,它将在森林调查、生态环境建模等生产与科学研究领域中得到更为广泛的应用。 相似文献
5.
In recent years, airborne LiDAR sensors have shown remarkable performance in the mapping of forest vegetation. This experimental study looks at LiDAR data at the scale of individual pulses to elucidate the sources behind interpulse variation in backscattering. Close-range photogrammetry was used for obtaining the canopy reference measurements at the ratio scale. The experiments illustrated different orientation techniques in the field, LiDAR acquisitions and photogrammetry in both leaf-on and leaf-off conditions, and two-waveform recording LiDAR sensors. The intrafootprint branch silhouettes in zenith-looking images, in which the camera, footprint, and LiDAR sensor were collinear, were extracted and contrasted with LiDAR backscattering. An enhanced planimetric match (refinement of strip matching) was achieved by shifting the pulses in a strip and searching for the maximal correlation between the silhouette and LiDAR intensity. The relative silhouette explained up to 80–90% of the interpulse variation. We tested whether accounting for the Gaussian spread of intrafootprint irradiance would improve the correlations, but the effect was blurred by small-scale geometric noise. Accounting for receiver gain variations in the Leica ALS60 sensor data strengthened the dependences. The size of the vegetation objects required for triggering a LiDAR observation was analyzed. We demonstrated the use of LiDAR pulses adjacent to canopy vegetation, which did not trigger a canopy echo, for canopy mapping. Pulses not triggering an echo constitute the complement to the actual canopy. We conclude that field photogrammetry is a useful tool for mapping forest canopies from below and that quantitative analysis is feasible even at the scale of single pulses for enhanced understanding of LiDAR observations from vegetation. 相似文献
6.
Individual tree crown delineation is of great importance for forest inventory and management. The increasing availability of high-resolution airborne light detection and ranging (LiDAR) data makes it possible to delineate the crown structure of individual trees and deduce their geometric properties with high accuracy. In this study, we developed an automated segmentation method that is able to fully utilize high-resolution LiDAR data for detecting, extracting, and characterizing individual tree crowns with a multitude of geometric and topological properties. The proposed approach captures topological structure of forest and quantifies topological relationships of tree crowns by using a graph theory-based localized contour tree method, and finally segments individual tree crowns by analogy of recognizing hills from a topographic map. This approach consists of five key technical components: (1) derivation of canopy height model from airborne LiDAR data; (2) generation of contours based on the canopy height model; (3) extraction of hierarchical structures of tree crowns using the localized contour tree method; (4) delineation of individual tree crowns by segmenting hierarchical crown structure; and (5) calculation of geometric and topological properties of individual trees. We applied our new method to the Medicine Bow National Forest in the southwest of Laramie, Wyoming and the HJ Andrews Experimental Forest in the central portion of the Cascade Range of Oregon, U.S. The results reveal that the overall accuracy of individual tree crown delineation for the two study areas achieved 94.21% and 75.07%, respectively. Our method holds great potential for segmenting individual tree crowns under various forest conditions. Furthermore, the geometric and topological attributes derived from our method provide comprehensive and essential information for forest management. 相似文献
7.
激光雷达在森林参数反演中的应用 总被引：1，自引：0，他引：1
激光雷达是近年来国际上发展十分迅速的主动遥感技术,在森林参数的定量测量和反演上取得了成功的应用。在林业上,高采样密度激光雷达能够获取单株木3维结构特征,采用不同的数据处理方法,可以得到不同精度的单株木参数。利用激光雷达测量森林参数不仅节省了人力,还提高了工作效率,现在已经成为快速获取树木几何参数的一种有效方法。文中主要介绍了LiDAR工作原理、类型及特点、影响LiDAR数据质量的因素、国内外LiDAR的发展状况及应用领域,重点介绍了国内外利用LiDAR数据反演森林参数(树高、郁闭度、冠幅、林分密度、断面积和蓄积量等)的方法和研究进展,同时对今后LiDAR在森林参数反演方面的研究作了展望。 相似文献
8.
Jessica D. DeWitt Timothy A. Warner Peter G. Chirico Sarah E. Bergstresser 《地理信息系统科学与遥感》2017,54(4):552-572
For areas of the world that do not have access to lidar, fine-scale digital elevation models (DEMs) can be photogrammetrically created using globally available high-spatial resolution stereo satellite imagery. The resultant DEM is best termed a digital surface model (DSM) because it includes heights of surface features. In densely vegetated conditions, this inclusion can limit its usefulness in applications requiring a bare-earth DEM. This study explores the use of techniques designed for filtering lidar point clouds to mitigate the elevation artifacts caused by above ground features, within the context of a case study of Prince William Forest Park, Virginia, USA. The influences of land cover and leaf-on vs. leaf-off conditions are investigated, and the accuracy of the raw photogrammetric DSM extracted from leaf-on imagery was between that of a lidar bare-earth DEM and the Shuttle Radar Topography Mission DEM. Although the filtered leaf-on photogrammetric DEM retains some artifacts of the vegetation canopy and may not be useful for some applications, filtering procedures significantly improved the accuracy of the modeled terrain. The accuracy of the DSM extracted in leaf-off conditions was comparable in most areas to the lidar bare-earth DEM and filtering procedures resulted in accuracy comparable of that to the lidar DEM. 相似文献
9.
Full-waveform topographic LiDAR data provide more detailed information about objects along the path of a laser pulse than discrete-return (echo) topographic LiDAR data. Full-waveform topographic LiDAR data consist of a succession of cross-section profiles of landscapes and each waveform can be decomposed into a sum of echoes. The echo number reveals critical information in classifying land cover types. Most land covers contain one echo, whereas topographic LiDAR data in trees and roof edges contained multi-echo waveform features. To identify land-cover types, waveform-based classifier was integrated single-echo and multi-echo classifiers for point cloud classification.The experimental area was the Namasha district of Southern Taiwan, and the land-cover objects were categorized as roads, trees (canopy), grass (grass and crop), bare (bare ground), and buildings (buildings and roof edges). Waveform features were analyzed with respect to the single- and multi-echo laser-path samples, and the critical waveform features were selected according to the Bhattacharyya distance. Next, waveform-based classifiers were performed using support vector machine (SVM) with the local, spatial features of waveform topographic LiDAR information, and optical image information. Results showed that by using fused waveform and optical information, the waveform-based classifiers achieved the highest overall accuracy in identifying land-cover point clouds among the models, especially when compared to an echo-based classifier. 相似文献
10.
Estimating forest biomass using small footprint LiDAR data: An individual tree-based approach that incorporates training data 总被引：1，自引：0，他引：1
Zachary J. Bortolot Randolph H. Wynne 《ISPRS Journal of Photogrammetry and Remote Sensing》2005,59(6):824
A new individual tree-based algorithm for determining forest biomass using small footprint LiDAR data was developed and tested. This algorithm combines computer vision and optimization techniques to become the first training data-based algorithm specifically designed for processing forest LiDAR data. The computer vision portion of the algorithm uses generic properties of trees in small footprint LiDAR canopy height models (CHMs) to locate trees and find their crown boundaries and heights. The ways in which these generic properties are used for a specific scene and image type is dependent on 11 parameters, nine of which are set using training data and the Nelder–Mead simplex optimization procedure. Training data consist of small sections of the LiDAR data and corresponding ground data. After training, the biomass present in areas without ground measurements is determined by developing a regression equation between properties derived from the LiDAR data of the training stands and biomass, and then applying the equation to the new areas. A first test of this technique was performed using 25 plots (radius = 15 m) in a loblolly pine plantation in central Virginia, USA (37.42N, 78.68W) that was not intensively managed, together with corresponding data from a LiDAR canopy height model (resolution = 0.5 m). Results show correlations (r) between actual and predicted aboveground biomass ranging between 0.59 and 0.82, and RMSEs between 13.6 and 140.4 t/ha depending on the selection of training and testing plots, and the minimum diameter at breast height (7 or 10 cm) of trees included in the biomass estimate. Correlations between LiDAR-derived plot density estimates were low (0.22 ≤ r ≤ 0.56) but generally significant (at a 95% confidence level in most cases, based on a one tailed test), suggesting that the program is able to properly identify trees. Based on the results it is concluded that the validation of the first training data-based algorithm for determining forest biomass using small footprint LiDAR data was a success, and future refinement and testing are merited. 相似文献
11.
Obtaining reliable measures of tree canopy height across large areas is a central element of forest inventory and carbon accounting. Recent years have seen an increased emphasis on the use of active sensors like Radar and airborne LiDAR (light detection and scanning) systems to estimate various 3D characteristics of canopy and crown structure that can be used as predictors of biomass. However, airborne LiDAR data are expensive to acquire, and not often readily available across large remote landscapes. In this study, we evaluated the potential of stereo imagery from commercially available Very High Resolution (VHR) satellites as an alternative for estimating canopy height variables in Australian tropical savannas, using a semi-global dense matching (SGM) image-based technique. We assessed and compared the completeness and vertical accuracy of extracted canopy height models (CHMs) from GeoEye 1 and WorldView 1 VHR satellite stereo pairs and summarised the factors influencing image matching effectiveness and quality.Our results showed that stereo dense matching using the SGM technique severely underestimates tree presence and canopy height. The highest tree detection rates were achieved by using the near-infrared (NIR) band of GE1 (8–9%). WV1-GE1 cross-satellite (mixed) models did not improve the quality of extracted canopy heights. We consider these poor detection rates and height retrievals to result from: i) the clumping crown structure of the dominant Eucalyptus spp.; ii) their vertically oriented leaves (affecting the bidirectional reflectance distribution function); iii) image band radiometry and iv) wind induced crown movement affecting stereo-pair point matching. Our detailed analyses suggest that current commercially available VHR satellite data (0.5 m resolution) are not well suited to estimating canopy height variables, and therefore above ground biomass (AGB), in Eucalyptus dominated north Australian tropical savanna woodlands. 相似文献
12.
以浙江省海宁市4种代表行道树(广玉兰、无患子、悬铃木、香樟树)为研究对象,结合无人机(UAV)影像和三维激光扫描数据,利用ContextCapture、LiDAR360软件完成点云拼接、滤波、降噪和编辑,通过迭代最近点算法实现点云精细匹配,完成多平台点云数据融合,进而得到数字表面模型与数字高程模型,并制作冠层高度模型;采用分水岭分割算法对不同行道树树种的冠层高度模型进行单木分割,并综合局部最大值法实现单木树高、冠幅的参数提取。结果表明,本文方法进行行道树单木分割的精度高,树高、冠幅参数提取值的效果好,满足行道树几何参数调查要求。 相似文献
13.
This article's goal is to explore the benefits of using Digital Surface Model (DSM) and Digital Terrain Model (DTM) derived from LiDAR acquisitions for characterizing the horizontal structure of different facies in forested areas (primary forests vs. secondary forests) within the framework of an object-oriented classification. The area under study is the island of Mayotte in the western Indian Ocean. The LiDAR data were the data originally acquired by an airborne small-footprint discrete-return LiDAR for the “Litto3D” coastline mapping project. They were used to create a Digital Elevation Model (DEM) at a spatial resolution of 1 m and a Digital Canopy Model (DCM) using median filtering. The use of two successive segmentations at different scales allowed us to adjust the segmentation parameters to the local structure of the landscape and of the cover. Working in object-oriented mode with LiDAR allowed us to discriminate six vegetation classes based on canopy height and horizontal heterogeneity. This heterogeneity was assessed using a texture index calculated from the height-transition co-occurrence matrix. Overall accuracy exceeds 90%. The resulting product is the first vegetation map of Mayotte which emphasizes the structure over the composition. 相似文献
14.
Integration of WorldView-2 satellite image with small footprint airborne LiDAR data for estimation of tree carbon at species level has been investigated in tropical forests of Nepal. This research aims to quantify and map carbon stock for dominant tree species in Chitwan district of central Nepal. Object based image analysis and supervised nearest neighbor classification methods were deployed for tree canopy retrieval and species level classification respectively. Initially, six dominant tree species (Shorea robusta, Schima wallichii, Lagerstroemia parviflora, Terminalia tomentosa, Mallotus philippinensis and Semecarpus anacardium) were able to be identified and mapped through image classification. The result showed a 76% accuracy of segmentation and 1970.99 as best average separability. Tree canopy height model (CHM) was extracted based on LiDAR’s first and last return from an entire study area. On average, a significant correlation coefficient (r) between canopy projection area (CPA) and carbon; height and carbon; and CPA and height were obtained as 0.73, 0.76 and 0.63, respectively for correctly detected trees. Carbon stock model validation results showed regression models being able to explain up to 94%, 78%, 76%, 84% and 78% of variations in carbon estimation for the following tree species: S. robusta, L. parviflora, T. tomentosa, S. wallichii and others (combination of rest tree species). 相似文献
15.
In the present study, we aimed to map canopy heights in the Brazilian Amazon mainly on the basis of spaceborne LiDAR and cloud-free MODIS imagery with a new method (the Self-Organizing Relationships method) for spatial modeling of the LiDAR footprint. To evaluate the general versatility, we compared the created canopy height map with two different canopy height estimates on the basis of our original field study plots (799 plots located in eight study sites) and a previously developed canopy height map. The compared canopy height estimates were obtained by: (1) a stem diameter at breast height (D) – tree height (H) relationship specific to each site on the basis of our original field study, (2) a previously developed D–H model involving environmental and structural factors as explanatory variables (Feldpausch et al., 2011), and (3) a previously developed canopy height map derived from the spaceborne LiDAR data with different spatial modeling method and explanatory variables (Simard et al., 2011). As a result, our canopy height map successfully detected a spatial distribution pattern in canopy height estimates based on our original field study data (r = 0.845, p = 8.31 × 10−3) though our canopy height map showed a poor correlation (r = 0.563, p = 0.146) with the canopy height estimate based on a previously developed model by Feldpausch et al. (2011). We also confirmed that the created canopy height map showed a similar pattern with the previously developed canopy height map by Simard et al. (2011). It was concluded that the use of the spaceborne LiDAR data provides a sufficient accuracy in estimating the canopy height at regional scale. 相似文献
16.
利用机载激光雷达点云数据,计算了9种度量指标,并将其分为冠层的高度指标、结构复杂度指标和覆盖度指标。利用高度指标和结构复杂度指标,结合大量实测单木结构与年龄估测数据,从样点和区域尺度分别分析了青海云杉林冠层垂直结构分布,分析得知实验区内主要以中龄林和成熟林为主,冠层垂直分布复杂程度偏低,高度分化程度一般。通过回归分析发现首次回波覆盖度指标FCI与实测的有效植被面积指数PAIe有良好的相关性（R2=0.66）,在此基础上基于辐射传输模型反演了实验区内PAIe的水平分布,且用实测数据验证发现反演的PAIe略高于实测值（R2=0.67）,绝对平均误差为0.65。分析结果很好地反映了激光雷达在森林空间结构信息提取方面的应用潜力。 相似文献
17.
Qingyan Meng Xu Chen Jiahui Zhang Yunxiao Sun Jiaguo Li Tamás Jancsó Zhenhui Sun 《Journal of the Indian Society of Remote Sensing》2018,46(9):1433-1444
Urban green space is important for the well-being of urban residents. Seeking for three spatial dimension stereopsis is a very important issue in investigating urban green space. A potential applicability in the domain of urban tree space measurement and modelling has been explored based on LiDAR data in our study. This paper aims to present a framework—through a more automatic way—to extract canopy structure attributes. In this study, treetops were filtered by local maxima filtering algorithm from canopy height model. An improved spoke wheel algorithm was used to delineate the crown boundaries. And, an estimation issue of crown volume was simplified into three measurable parameters by estimating the crown structures. For accuracy assessment, data of 363 sampled trees located in the subset of Székesfehérvár city were selected randomly. The overall detection rate of treetop had proven to be 95.87% and crown boundaries were recognized effectively with a delineation quality of 88.59%, which were acceptable. About 80.26% of investigated crown volume estimates were obtained with shape distortion ranging from 3.1 to 7.8% according to the error analysis. The results indicated that the method can be used to extract canopy structure in urban areas. 相似文献
18.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献
19.
基于遥感的区域尺度森林地上生物量估算研究 总被引：1，自引：0，他引：1
森林是陆地生态系统最大的碳库,精确估算森林生物量是陆地碳循环研究的关键。首先从机载LiDAR数据中提取高度和密度统计量,采用逐步回归模型进行典型样区生物量估算;然后利用机载LiDAR数据估算的生物量作为样本数据,与多光谱遥感数据Landsat8 OLI的波段反射率及植被指数建立回归模型,实现区域尺度森林地上生物量估算。实验结果显示,机载LiDAR数据估算的鼎湖山样区生物量与地面实测生物量的相关性R2达0.81,生物量RMSE为40.85 t/ha,说明机载LiDAR点云数据的高度和密度统计量与生物量存在较高的相关性。以机载LiDAR数据估算的生物量为样本数据,结合多光谱遥感数据Landsat8 OLI估算粤西北地区的森林地上生物量,精度验证结果为:R2为0.58,RMSE为36.9 t/ha;针叶林、阔叶林和针阔叶混交林等3种不同森林类型生物量的估算结果为:R2分别为0.51(n=251)、0.58(n=235)和0.56(n=241),生物量RMSE分别为24.1 t/ha、31.3 t/ha和29.9 t/ha,估算精度相差不大。总体上看,利用遥感数据可以开展区域尺度的森林地上生物量估算,为森林固碳监测提供有力的参考数据。 相似文献
20.
地基激光雷达的玉兰林冠层叶面积密度反演 总被引：1，自引：0，他引：1
叶面积密度LAD(Leaf Area Density)是表征冠层内部叶面积垂直分布的重要参数,其分布廓线的准确反演对研究植被碳氮循环、初级生产力和生物量估算等具有重要意义。本文在电子科技大学校内建立实验样区,利用地基激光雷达Leica Scan Station C10和数码相机获取玉兰林高分辨率3维激光点云数据和真彩色影像。利用监督分类将真彩色影像中枝干等非光合组织与叶片分离,再将像素分类信息映射给点云数据,从而提取叶片点云。通过点云数据体元化,并引入2维凸包算法确定垂直方向分层树冠边界,获取激光接触冠层的频率;随机选择不同高度的多个叶片,利用特征值法进行叶片平面拟合,估算出叶倾角,并结合天顶角估算叶倾角校正因子;最后基于体元的冠层分析VCP(Voxel-based Canopy Profiling)方法实现树林冠层LAD反演。结果表明体元化的叶片点云数据能准确确定树林冠层边界和统计接触频率实现LAD反演;反演的LAD变化走势与区域林木冠层叶片垂直分布相吻合,在冠层中下部随着高度的增加叶面积密度也随之增加,在4 m高度处达到最大值1 m2/m3,之后随着高度的增加叶面积密度逐渐降低。根据LAD计算得到的累积叶面积指数LAI为3.20 m2/m2,与LAI-2200实测的叶面积指数相比,相对误差为1.26%。 相似文献