共查询到20条相似文献，搜索用时 437 毫秒
1.
Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity 总被引：1，自引：0，他引：1
Pierino Lestuzzi Youssef Belmouden Martin Trueb 《Bulletin of Earthquake Engineering》2007,5(4):549-569
This paper investigates the non-linear seismic behavior of structures such as slender unreinforced masonry shear walls or
precast post-tensioned reinforced concrete elements, which have little hysteretic energy dissipation capacity. Even if this
type of seismic response may be associated with significant deformation capacity, it is usually not considered as an efficient
mechanism to withstand strong earthquakes. The objective of the investigations is to propose values of strength reduction
factors for seismic analysis of such structures. The first part of the study is focused on non-linear single-degree-of-freedom
(SDOF) systems. A parametric study is performed by computing the displacement ductility demand of non-linear SDOF systems
for a set of 164 recorded ground motions selected from the European Strong Motion Database. The parameters investigated are
the natural frequency, the strength reduction factor, the post-yield stiffness ratio, the hysteretic energy dissipation capacity
and the hysteretic behavior model (four different hysteretic models: bilinear self-centring, with limited or without energy
dissipation capacity, modified Takeda and Elastoplastic). Results confirm that the natural frequency has little influence
on the displacement ductility demand if it is below a frequency limit and vice versa. The frequency limit is found to be around
2 Hz for all hysteretic models. Moreover, they show that the other parameters, especially the hysteretic behavior model, have
little influence on the displacement ductility demand. New relationships between the displacement ductility demand and the
strength reduction factor for structures having little hysteretic energy dissipation capacity are proposed. These relationships
are an improvement of the equal displacement rule for the considered hysteretic models. In the second part of the investigation,
the parametric study is extended to multi-degree-of-freedom (MDOF) systems. The investigation shows that the results obtained
for SDOF systems are also valid for MDOF systems. However, the SDOF system overestimates the displacement ductility demand
in comparison to the corresponding MDOF system by approximately 15%. 相似文献
2.
剪切型结构的抗震强度折减系数研究 总被引：1，自引：0，他引：1
为了研究剪切型结构抗震强度需求的变化规律,本文基于单自由度体系的非线性时程分析,研究了不同场地条件下延性折减系数与位移延性系数和结构自振周期的关系;采用修正等效单自由度体系位移延性折减系数的方法,研究了剪切型多自由度体系的延性折减系数;以基于中国建筑抗震规范设计的代表不同抗震能力要求的RC框架结构为分析对象,通过静力弹塑性分析,研究了RC框架结构的体系超强能力。分析结果表明场地类别、位移延性水准和结构振动周期对单自由度体系的延性折减系数有显著的影响;多自由度体系的抗震延性折减系数明显比其相应的等效单自由度体系的抗震延性折减系数小;RC框架结构的超强系数一般随结构楼层数的增加而减小,随抗震设防烈度的增大而减小,内框架的超强系数比边框架的超强系数大。 相似文献
3.
A procedure is proposed whereby input and hysteretic energy spectra developed for single-degree-of-freedom (SDOF) systems are applied to multi-degree-of-freedom (MDOF) steel moment resisting frames. The proposed procedure is verified using four frames, viz., frame with three-, five-, seven- and nine-stories, each of which is subjected to the fault-normal and fault-parallel components of three actual earthquakes. A very good estimate for the three- and five-story frames, and a reasonably acceptable estimate for the seven-, and nine-story frames, have been obtained. A method for distributing the hysteretic energy over the frame height is also proposed. This distribution scheme allows for the determination of the energy demand component of a proposed energy-based seismic design (EBSD) procedure for each story. To address the capacity component of EBSD, a story-wise optimization design procedure is developed by utilizing the energy dissipating capacity from plastic hinge formation/rotation for these moment frames. The proposed EBSD procedure is demonstrated in the design of a three-story one-bay steel moment frame. 相似文献
4.
By scanning modulated or un-modulated earthquakes spatio-temporally in the region of Sichuan-Yunnan,short-term non-stationary seismic precursory patterns were extracted with significant difference and the characteristic of non-stationary short-term seismic anomalies were analyzed as well as prediction efficiency of modulated small earthquakes before a strong earthquake. Besides,small earthquake modulation ratios near the region of the epicenter were calculated and sorted by time. The results indicated that there were significant effects using the modulated earthquake method to predict earthquakes greater than MS6. 0 in a short time. Before the MS8. 0 Wenchuan earthquake,there were obvious short-term precursory seismicity gap patterns of modulated small earthquakes. 相似文献
5.
The paper deals with the evaluation of non-stationary spectral moments of multi-degree-of-freedom (MDOF) line systems subjected to seismic excitations. The spectral moments of the response are evaluated in incremental form solution by means of an unconditionally stable step-by-step procedure. As an application, the statistics of the largest peak of the response are also evaluated. 相似文献
6.
为了提高带钢避难建筑的抗震性能,对高强度地震下带钢避难建筑实施抗震设计。设置高强度地震下带钢避难所的抗震设防要求,给出不同地震情况下地震避难所设防加速度值以及地震避难所地震影响系数最高值,通过SAP2000分析软件对带钢地震避难建筑结构实施动力弹塑性时程研究,选择合理的塑性铰参数值,通过在建筑周围设置钢支撑的策略对带钢避难建筑实施设计,分析高强度地震下的带钢避难建筑的抗震性能。实验结果说明,采用所提设计方法下的带钢避难建筑在大震情况下的反应优,延性较强,在不同地震波作用下的水平方向位移角满足抗震设防规范。 相似文献
7.
Most real-life structural/mechanical systems have complex geometrical and material properties and operate under complex fuzzy environmental conditions. These systems are certainly subjected to fuzzy random excitations induced by the environment. For an analytical treatment of such a system subjected to fuzzy random excitations, it becomes necessary to establish the general theory of dynamic response of a system to fuzzy random excitations. In this paper, the theory of response, fuzzy mean response and fuzzy covariance response of a single-degree-of-freedom (sdf) system to fuzzy random excitations in the time domain and frequency domain is put forward. The theory of response analysis of an sdf system to both stationary and non-stationary fuzzy random excitations in the time domain and frequency domain is established. Two examples are considered in order to demonstrate the rationality and validity of the theory, and the models of stationary filtered white noise and non-stationary filtered white noise fuzzy stochastic processes of the earthquake ground motion are set up. Methods of analysis for fuzzy random seismic response of sdf systems are put forward using the principles of response analysis of an sdf fuzzy random dynamic system. 相似文献
8.
Non-stationarity in statistical properties of the subsurface is often ignored. In a classical linear Bayesian inversion setting of seismic data, the prior distribution of physical parameters is often assumed to be stationary. Here we propose a new method of handling non-stationarity in the variance of physical parameters in seismic data. We propose to infer the model variance prior to inversion using maximum likelihood estimators in a sliding window approach. A traditional, and a localized shrinkage estimator is defined for inferring the prior model variance. The estimators are assessed in a synthetic base case with heterogeneous variance of the acoustic impedance in a zero-offset seismic cross section. Subsequently, this data is inverted for acoustic impedance using a non-stationary model set up with the inferred variances. Results indicate that prediction as well as posterior resolution is greatly improved using the non-stationary model compared with a common prior model with stationary variance. The localized shrinkage predictor is shown to be slightly more robust than the traditional estimator in terms of amplitude differences in the variance of acoustic impedance and size of local neighbourhood. Finally, we apply the methodology to a real data set from the North Sea basin. Inversion results show a more realistic posterior model than using a conventional approach with stationary variance. 相似文献
9.
Timothy John Sullivan 《Bulletin of Earthquake Engineering》2013,11(6):2197-2231
This paper details a direct displacement-based design procedure for steel eccentrically braced frame (EBF) structures and gauges its performance by examining the non-linear dynamic response of a series of case study EBF structures designed using the procedure. Analytical expressions are developed for the storey drift at yield and for the storey drift capacity of EBFs, recognising that in addition to link beam deformations, the brace and column axial deformations can provide important contributions to storey drift components. Case study design results indicate that the ductility capacity of EBF systems will tend to be relatively low, despite the large local ductility capacity offered by well detailed links. In addition, it is found that while the ductility capacity of EBF systems will tend to reduce with height, this is not necessarily negative for seismic performance since the displacement capacity for taller EBF systems will tend to be large. To gauge the performance of the proposed DBD methodology, analytical models of the case study design solutions are subject to non-linear time-history analyses with a set of spectrum-compatible accelerograms. The average displacements and drifts obtained from the NLTH analyses are shown to align well with design values, confirming that the new methodology could provide an effective tool for the seismic design of EBF systems. 相似文献
10.
The inelastic seismic response behaviour for a range of simplified single-degree-of-freedom models has been analysed using 180 random phase angle synthetic accelerograms with different frequency contents and different durations and 105 real accelerograms collected from different regions worldwide. Results from the analyses have identified that the frequency content of the excitation can greatly influence the ductility demand ratio due to inelastic amplification effects. Consequently, results derived from intraplate earthquake records (typically of higher frequency content) were generally different to those from interplate records. However, the commonly used El Centro accelerogram has significantly lower ductility demand in the low period range than the average of records with similar elastic response spectral shape. Apart from this, there was little evidence to suggest any inherent differences in the inelastic response behaviour of buildings from intraplate and interplate earthquakes which possessed similar frequency content. Thus, the average ductility demand ratios from future earthquakes in an area can be predicted by interpolation of the results presented in this paper assuming the elastic response spectrum has been defined. Ductility demand ratios derived from the synthetic accelerograms and the real accelerograms with similar frequency content have been shown to be consistent. However, results from synthetic records derived for the idealised code design spectra (such as the Uniform Building Code and the Australian Standard AS1170.4) indicate a significantly higher ductility demand in the long period range. 相似文献
11.
借助先进的计算机、网络技术与设备,利用多种地震理论学说和迄今为止所积累的描述地震活动记录,组建仿真中心,建立不同类型的地震仿真模型,借助SOA架构下的虚拟网络技术,将地震监测点和相关地震信息资源库互联,形成覆盖全国的地震预报模拟网。利用获取的数据,进行仿真处理,并逐步筛选出有效的地震数学模型,以便实现地震预报。 相似文献
12.
地震对人类生活安全有很大的威胁,对建筑结构有明显的影响,研究地震波动强度非平稳特征可为地震的预防提供参考。研究地震波动强度非平稳特征提取模型,分别设定确定性参数和随机参数的取值。对地震波动强度非平稳特性进行傅里叶分析,根据分析结果选取数学模型,并对模型参数进行设定;将记录的地震波动强度所对应的数振幅谱进行分解,拆分成一组不同尺度的分量,并对其重组创建连续分量,提取地震波振幅谱;利用地震波的振幅谱和相位谱之间的关系对地震波动强度非平稳特征进行提取。经过仿真实验证明,本方法提取地震波动强度非平稳特征的准确度更高,对分析高分辨率地震资料具有重要意义。 相似文献
13.
This paper presents new trends in the relationship between the ductility reduction factor and the ductility demand in the seismic design of buildings. A total of 4860 inelastic time-history analyses were carried out to study this relationship using 60 single-degree-of-freedom models excited by an ensemble of 81 earthquake accelerogram records from around the world. The asymmetrical distribution of the results highlighted the inaccuracies associated with assuming a normal distribution simply described by the mean and standard deviation to represent the data. A probability of exceedence approach has been used based on counting the number of occurrences the ductility demand exceeds a specified level. The ductility reduction factors developed in this study are consistent with other studies in the long-period range but are different in the short-period range. The ductility reduction factor for very short period buildings of limited ductility has been found to be greater than previously predicted. © 1998 John Wiley & Sons, Ltd. 相似文献
14.
Inelastic deformations of structures subjected to strong earthquakes are commonly accepted by Aseismic Codes; some discrepancies exist in the different procedures proposed to design a structure for which the ductility demand is to be limited within acceptable values. To have a better insight into the seismic behaviour of multi-degree-of-freedom structures beyond the elastic range, the dynamic elasto-plastic response of a ten-storey shear system under two sets of artificial and recorded accelerograms is studied considering different stiffness-strength distributions and constitutive laws. Statistics of the results are presented, demonstrating the dependence of the overall and storey ductility values and of their ratio on the characteristics of the structure and excitation. 相似文献
15.
Sonia E. Ruiz 《地震工程与结构动力学》1991,20(1):1-9
Asymmetrically yielding single-degree-of-freedom elastoplastic systems are subjected to simulated accelerograms based on El Centro-NS, 1940 ground motion (wide frequency band) to calculate the corresponding ductility demands. Results are compared with those corresponding to simulated accelerograms of the SCT-EW, 1985 Mexico earthquake (narrow frequency band) obtained in a previous work. Results obtained reveal that the characteristics of the excitation influence the response of asymmetrically yielding structures and that the differences found on responses corresponding to both earthquakes are due to frequency content, duration and/or intensity of motion. The effect of the latter concepts is studied using modulating sinusoidal excitations as well as accelerograms recorded on soft and hard soils of Mexico City. Two alternate expressions are proposed to evaluate the increase in ductility demands of structures with asymmetric force-displacement curves with respect to symmetric ones. Those expressions take into account motion intensity and duration, as well as seismic design coefficient. 相似文献
16.
This paper introduces an extension of the traditional stationary linear coregionalization model to handle the lack of stationarity. Under the proposed model, coregionalization matrices are spatially dependent, and basic univariate spatial dependence structures are non-stationary. A parameter estimation procedure of the proposed non-stationary linear coregionalization model is developed under the local stationarity framework. The proposed estimation procedure is based on the method of moments and involves a matrix-valued local stationary variogram kernel estimator, a weighted local least squares method in combination with a kernel smoothing technique. Local parameter estimates are knitted together for prediction and simulation purposes. The proposed non-stationary multivariate spatial modeling approach is illustrated using two real bivariate data examples. Prediction performance comparison is carried out with the classical stationary multivariate spatial modeling approach. According to several criteria, the prediction performance of the proposed non-stationary multivariate spatial modeling approach appears to be significantly better. 相似文献
17.
SIMULATION OF SEISMIC RISK IN THE DALIANGSHAN SUB-BLOCK AND ADJACENT AREAS USING THE NONLINEAR FRICTION FEM METHOD 
下载免费PDF全文
下载免费PDF全文 Most earthquakes result from fault activity under heterogeneous loading and complex physical properties, also affected by fault structure and interaction between faults. Such a complicated mechanism makes often failures of the "seismic gap" theory in the effort of medium-and long-term earthquake prediction. This study attempts to address this issue using the finite element method(FEM).The friction behavior of faults can be used to simulate the non-uniformity of rupture processes of the seismogenic structure. So we use the FEM containing non-linear friction to simulate fault ruptures in the Daliangshan sub-block and adjacent areas, and compare the results with time-space evolution of historical MS ≥ 7 earthquakes since 1840 in this region. In the simulation, the sequence of large-batch fault contact nodes change from "stick state" to "slip state" in short time, which mimics the sudden fault slip and the occurrence of major earthquakes. The results show that the fault breaking lengths from simulation are largely consistent with the magnitudes of historical earthquakes in the study area, such as the 1850 Puge-Xichang MS7.5, and 1887 Shiping MS7.0 earthquakes. The simulation also shows the development of seismic gaps and "gap breaks" by major earthquakes on the Xianshuihe fault, such as 1955 Kangding MS7.5 earthquake. Especially, the results illustrated the very long time of the seismogenic process of the 2008 Wenchuan MS8.0 earthquake, and the corresponding sudden big rupture along the Longmenshan Fault, which is very similar to the observed surface rupture and very long incubation time and sudden co-seismic process. Then, this simulation is further applied to long-term earthquake prediction for the study area by calculation on a much longer time. The simulation results suggest that the Xiaojiang fault and the Zemuhe fault have relatively higher seismic risk, while moderate-sized earthquakes might occur on the Daliangshan fault and the Aninghe fault, and major earthquakes might rupture the northern segment of the Xianshuihe fault in a much longer time. 相似文献
18.
Earthquake excitation not only has evident randomness but also has strong fuzziness owing to the uncertainties in the definition of earthquake intensity and site soil classification. In this paper, the seismic ground motion is simulated as a stationary filtered white noise with fuzzy parameters, an analytical procedure is proposed to analyse the fuzzy random vibration of multi-degree-of-freedom (MDOF) hysteretic systems, and the covariance matrix of the fuzzy random responses is derived by the equivalent linearization technique. Finally, some numerical results for a two-storey shear hysteretic frame are presented to demonstrate the validity and effectiveness of the procedure proposed. 相似文献
19.
The analysis of seismic hazards relies on the statistical analysis of historical seismic data and the instrumental seismic catalog to obtain the regional earthquake recurrence interval and earthquake probability. The accuracy of analysis thus depends strongly on the completeness of the seismic data used. However, available seismic catalogs are too short or incomplete for the reliable analysis of the statistical characteristics of earthquakes. If a long-term synthetic seismic catalog can be generated using a physics-based numerical simulation, and the simulation results match the crustal deformation, seismicity, and other observations,then such a synthetic catalog helps us to further understand the characteristics of seismic activity and analyze the regional seismic hazard. In this paper, taking the northeastern Tibetan Plateau as a case study, we establish a three-dimensional visco-elastoplastic finite-element model to simulate earthquake cycles and the spatiotemporal evolution of earthquakes on the model fault system and obtain a seismic catalog on a time scale of tens of thousands of years. On the basis that the model satisfies the regional geodynamics of the northeastern Tibetan Plateau, we analyze seismicity on the northeastern Tibetan Plateau using the simulated synthetic earthquake catalog. The characteristics of earthquake recurrence at different locations and different magnitudes, and the long-term average probability of earthquake occurrence within the fault system on the northeastern Tibetan plateau are studied. The results are a reference for regional seismic hazard assessment and provide a basis for the physics-based numerical prediction of earthquakes. 相似文献
20.
结构抗震设计中的强度折减系数研究 总被引：27，自引：12，他引：27
借助于单自由度弹塑性动力时程分析程序，对延性结构的强度折减系数进行了研究，在统计平均和回归分析的基础上，建立了平均强度折系数的函数形式，本文所建立的平强度折减系数函数，从理论上明确了结构具有延性对弹性地震力的折减关系，研究成果可供结构抗震设计规范采纳应用。 相似文献