首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 453 毫秒
1.
A study of normal faults in the Nubian Sandstone Sequence, from the eastern Gulf of Suez rift, has been conducted to investigate the relationship between the microstructure and petrophysical properties of cataclasites developed along seismic-scale faults (slip-surface cataclasites) and smaller displacement faults (deformation bands) found in their damage zones. The results help to quantify the uncertainty associated with predicting the fluid flow behaviour of seismic-scale faults by analysing small faults recovered from core, a common procedure in the petroleum industry. The microstructure of the cataclasites was analysed as well as their single-phase permeability and threshold pressure. Faulting occurred at a maximum burial depth of ∼1.2 km. The permeability of deformation band and slip-surface cataclasites varies over ∼1.5 orders of magnitude for a given fault. Our results suggest that the lowest measured deformation band permeabilities provide a good estimate for the arithmetic-mean permeability of the major slip-surface cataclasites. This is because the cataclastic permeability reduction is mostly established early in the deformation history. Stress at the time of faulting rather than final strain appears to be the critical factor determining fault rock permeability. For viable predictions it is important that the slip-surface cataclasites and deformation bands originate from the same host. On the other hand, a higher uncertainty is associated with threshold pressure predictions, as the arithmetic-mean slip-surface cataclasite threshold pressure exceeds the highest measured deformation band threshold pressure by at least a factor of 4.  相似文献   

2.
Sea Beam bathymetry and SeaMARC II side-scan sonar data are used to constrain the width of the zone of active faulting (plate boundary zone) to be 90 km (0.8 Ma) wide along the East Pacific Rise 8° 30N – 10° 00N. Fault scarps, identified on the basis of contoured, shaded relief and slope intensity maps of bathymetry, are measured. These scarp measurements, used in conjunction with data from a separate near-axis study, show that both inward- and outward-facing fault scarps increase in height away from the ridge axis, reaching average heights of 100 m at 0.8±0.2 Ma, 45±10 km from the ridge axis. Beyond this distance, there is no significant increase in scarp height. Earlier studies had suggested that the width of the zone of active faulting for outward-dipping faults might be significantly narrower than for inward-dipping faults. A lower crustal decoupling zone between brittle crust and strong upper mantle is predicted to exist out to 20–200 km from the ridge based on previously published lithospheric models. Such a decoupling zone may explain why outward-dipping faults continue to be active as far off-axis as inward-dipping faults. If the width of the zone of active faulting is controlled by the width of a lower crustal decoupling zone, our observations predict an 90 km wide decoupling zone in the lower oceanic crust at this location.  相似文献   

3.
We acquired structural, granulometric and permeability data from a total of 25 extensional fault zones developed in high-porosity sandy sediments of the Crotone basin. Undeformed sediments have mean permeability values in the 103–105 mD range. The studied fault zones have displacement values spanning from a few centimeters to about 100 m, and generally show well-defined narrow fault cores bounded by damage zones on both hangingwall and footwall sides. Fault core rocks developed by progressive comminution and consist of foliated granular material and gouge lenses along indurated and striated slip surfaces. Mean fault core rock permeability broadly ranges between 101 and 104 mD, although we recorded permeability values lower than 10 mD in gouge lenses. Fault damage zones typically consist of closely spaced single to anastomosing cataclastic deformation bands with different degrees of complexity and mean permeability between 102 and 104 mD, i.e. lower than host sands. We obtained empirical relationships between bulk permeability, fault zone thickness, and fault displacement. In particular, both fault cores and damage zones tend to widen with increasing fault displacement, especially in the first ten meters. Most bulk permeability reductions in both fault cores and damage zones occur at sub-seismic scale, and decrease for displacement greater than 25–30 m.  相似文献   

4.
Although typically interpreted as 2D surfaces, faults are 3D narrow zones of highly and heterogeneously strained rocks, with petrophysical properties differing from the host rock. Here we present a synthetic workflow to evaluate the potential of seismic data for imaging fault structure and properties. The workflow consists of discrete element modeling (DEM) of faulting, empirical relations to modify initial acoustic properties based on volumetric strain, and a ray-based algorithm simulating prestack depth migration (PSDM). We illustrate the application of the workflow in 2D to a 100 m displacement normal fault in a kilometer size sandstone-shale sequence at 1.5 km depth. To explore the effect of particle size on fault evolution, we ran two DEM simulations with particle assemblages of similar bulk mechanical behavior but different particle size, one with coarse (1–3 m particle radii) and the other with fine (0.5–1.5 m particle radii) particles. Both simulations produce realistic but different fault geometries and strain fields, with the finer particle size model displaying narrower fault zones and fault linkage at later stages. Seismic images of these models are highly influenced by illumination direction and wave frequency. Specular illumination highlights flat reflectors outside the fault zone, but fault related diffractions are still observable. Footwall directed illumination produces low amplitude images. Hanging wall directed illumination images the shale layers within the main fault segment and the lateral extent of fault related deformation. Resolution and the accuracy of the reflectors are proportional to wave frequency. Wave frequencies of 20 Hz or more are necessary to image the different fault structure of the coarse and fine models. At 30–40 Hz, there is a direct correlation between seismic amplitude variations and the input acoustic properties after faulting. At these high frequencies, seismic amplitude variations predict both the extent of faulting and the changes in rock properties in the fault zone.  相似文献   

5.
A study of Sea Beam bathymetry and SeaMARC II side-scan sonar allows us to make quantitative measures of the contribution of faulting to the creation of abyssal hill topography on the East Pacific Rise (EPR) 9°15 N–9°50 N. We conclude that fault locations and throws can be confidently determined with just Sea Beam and SeaMARC II based on a number of in situ observations made from the ALVIN submersible. A compilation of 1026 fault scarp locations and scarp height measurements shows systematic variations both parallel and perpendicular to the ridge axis. Outward-facing fault scarps (facing away from the ridge axis), begin to develop within 2 km of the ridge and reach their final average height of 60 m at 5–7 km. Beyond these distances, outward-dipping faults appear to be locked, although there is some indication of continued lengthening of outward-facing fault scarps out to the edge of the survey area. Inward-facing fault scarps (facing toward the ridge axis), initiate 2 km off axis and increase in height and length out to the edge of our data at 30 km, where the average height of inward fault scarps is 60–70 m and the length is 30 km. Continued slip on inward faults at a greater distance off axis is probable, but based on fault lengths, 80% of the lengthening of inward fault scarps occurs within 30 km of the axis (>95% for outward faults). Along-strike propagation and linkage of these faults are common. Outward-dipping faults accommodate more apparent horizontal strain than inward ones within 10 km of the ridge. The net horizontal extension due to faulting at greater distances is estimated as 4.2–4.3%, and inward and outward faults contribute comparably. Both inward- and outward-facing fault scarps increase in height from north to south in our study area in the direction of decreasing inferred magma supply. Average fault spacing is 2 km for both inward-dipping and outward-dipping faults. The azimuths of fault scarps document the direction of ridge spreading, but they are sensitive to local changes in least compressive stress direction near discontinuities. Both the ridge trend and fault scarp azimuths show a clockwise change in trend of 3–5° from 9°50 N to 9°15 N approaching the 9° N overlapping spreading center.  相似文献   

6.
Previous GPS-based geodetic studies and onland paleoseismologic studies in Trinidad have shown that the 50-km-long, linear, onland segment of the Central Range fault zone (CRFZ) accommodates at least 60% of the total rate of right-lateral displacement (∼20 mm/yr) between the Caribbean and South American plates. 2D and 3D seismic reflection data from a 60-km-long and 30-km-wide swath of the eastern shelf of Trinidad (block 2AB) were used to map the eastern offshore extension of this potentially seismogenic and hazardous fault system and to document its deeper structure and tectonic controls on middle Miocene to recent clastic stratigraphy. Two unconformity surfaces and seafloor were mapped using 3D seismic data to generate isochron maps and to illustrate the close control of the CRFZ and associated secondary faults on small, clastic basins formed along its anastomosing strands and the east-west-striking North Darien Ridge fault zone (NDRFZ) that exhibits a down-to-the-north normal throw. Mapped surfaces include: 1) the middle Miocene angular unconformity, a prominent, regional unconformity surface separating underlying thrust-deformed rocks from a much less deformed overlying section; this regional unconformity is well studied from onland outcrops in Trinidad and in other offshore areas around Trinidad; 2) a Late Neogene angular unconformity developed locally within block 2AB that is not recognized in Trinidad; and 3) the seafloor of the eastern Trinidad shelf which exhibits linear scarps for both the CRFZ and the east-west-striking North Darien Ridge fault zone. Clastic sedimentary fill patterns identified on these isochron maps indicate a combined effect of strike-slip and reverse faulting (i.e., tectonic transpression) produced by active right-lateral shear on the CRFZ, which is consistent with the obliquity of the strike of the fault to the interplate slip vector known from GPS studies in onland Trinidad. The NDRFZ and a sub-parallel and linear family of east-west-striking faults with normal and possibly transtensional motions also contributed to the creation of accommodation space within localized, post-middle Miocene clastic depocenters south of the CRFZ.  相似文献   

7.
The seafloor of the Alboran Sea in the western Mediterranean is disrupted by deformations resulting from convergence between the African and Eurasian plates. Based on a compilation of existing and new multibeam bathymetry data and high-resolution seismic profiles, our main objective was to characterize the most recent structures in the central sector, which depicts an abrupt morphology and was chosen to investigate how active tectonic processes are shaping the seafloor. The Alboran Ridge is the most prominent feature in the Alboran Sea (>130 km in length), and a key element in the Gibraltar Arc System. Recent uplift and deformation in this ridge have been caused by sub-vertical, strike-slip and reverse faults with associated folding in the most recent sediments, their trend shifting progressively from SW–NE to WNW–ESE towards the Yusuf Lineament. Present-day transtensive deformation induces faulting and subsidence in the Yusuf pull-apart basin. The Alboran Ridge and Yusuf fault zones are connected, and both constitute a wide zone of deformation reaching tens of kilometres in width and showing a complex geometry, including different active fault segments and in-relay folds. These findings demonstrate that Recent deformation is more heterogeneously distributed than commonly considered. A narrow SSW–NNE zone with folding and reverse faulting cuts across the western end of the Alboran Ridge and concentrates most of the upper crustal seismicity in the region. This zone of deformation defines a seismogenic, left-lateral fault zone connected to the south with the Al Hoceima seismic swarm, and representing a potential seismic hazard. Newly detected buried and active submarine slides along the Alboran Ridge and the Yusuf Lineament are clear signs of submarine slope instability in this seismically active region.  相似文献   

8.
Growth strata are used to determine the kinematics of synsedimentary structures such as faults. Classical methods of analysis such as thickness versus throw plot consider that the available space created by fault slip in the hanging wall of faults is instantaneously filled up by sediments. This has lead many previous works to identify a cyclic activity for growth faults. Here we perform a careful analysis of the variation of strata thicknesses on each side of a very well documented normal growth fault in the Niger delta. We show that these thickness variations are induced by the alternation of sedimentary processes during continuous fault slip. Suspended-load processes induce either uniform or slightly variable thickness of a large majority of mudstone layers. Bedload processes result in a preferential thickening of sand layers in the hanging wall. These high quality data thus provide strong grounds for doubting the polycyclic growth diagnosed for some faults at the scale of sedimentary cycles and supports the notion that fault displacement rates can be very well behaved. Our study emphasizes the important conclusion that stable fault growth, and related displacement rates, can appear to be punctuated when viewed at the scale of sedimentary cycles. It follows that care should be taken when attempting to derive displacement rates on temporal scales equivalent to those of alternating sedimentological cycles.  相似文献   

9.
The Gibraltar Strait is the very narrow neck which connects the Atlantic Ocean and the Mediterranean Sea. The causes and mode of its opening at the end of the Messinian Salinity Crisis are still a matter of debate, and models based on eustatic rise and/or topographic lowering due to either erosion or faulting are generally evoked. We investigated the presence of faults based on a morphological and structural analysis of the Camarinal Sill, the shallowest passage in the Gibraltar Strait (<100 m water depth in places). This sill connects the Spanish and Moroccan shelves, and probably represents a structural high inherited from the Miocene compressive tectonics which took place in the external zones of the Betic-Rif orogenic arc. Our high-resolution bathymetric data enabled us to identify and interpret the origin of major morphological features in the area, including canyons, channels and a landslide, which we name the Tarifa landslide. Topographic arguments suggest that the Camarinal Sill is crossed by two main E-W- to ENE-WSW-directed fault zones which bound areas with different distribution, orientation and slopes of both scarps and crests. We name these the Hercules and Tarik fault zones, north and south of the sill respectively. The Hercules fault zone probably incorporates a normal movement component, whereas kinematic indicators are poor along the Tarik fault zone. The age of faulting is poorly constrained in both cases. Together with existing evidence of faults onland, the presence of these fault zones implies that they could be responsible for, or have contributed to, the opening of the Gibraltar Strait.  相似文献   

10.
A discrete element model is used to investigate progressive cover deformation above a steep (70°), basement normal fault. The cover materials are homogenous with frictional material behavior. In the model shown here both normal and reverse faults in the cover accommodate displacement on the underlying basement fault. The earliest faults are curved, reverse faults which propagate upwards from the basement fault tip into the proto hanging wall. These are replaced, progressively towards the footwall, by subvertical to steep normal faults and finally by a normal fault which dips at an angle predicted by Mohr-Coulomb theory. Thus, most early, secondary structures are located in the hanging-wall of the final, through-going, fault. This structural evolution produces an asymmetric, triangular zone of deformation above the basement fault tip which superficially resembles that associated with trishear; however, its progressive development is quite different. Results also emphasize that the occurrence of reverse faults in extensional settings is not diagnostic of inversion.  相似文献   

11.
The Cariaco basin, located ∼40 km off the central part of the coast of Venezuela, is the largest (∼4000 km2) and bathymetrically deepest (1400 m BSL) Neogene fault-bounded basin within the right-lateral strike-slip plate boundary zone that separates the Caribbean and South American plates. Using subsurface geophysical data, we test two previously proposed tectonic models for the age, distribution and nature of east-west-striking, strike-slip faults, and basin-forming mechanism for the two main depocenters of the Cariaco basin. The earliest interpretation for the opening of the twin Cariaco depocenters by Schubert (1982) proposes that both depocenters formed synchronously by extension along transverse (north-south) normal faults at a ∼30-km-wide rhomboidally-shaped pull-apart basin between the right-lateral, east-west-striking, and parallel San Sebastian and El Pilar fault zones. A later model by Ben-Avraham and Zoback (1992) proposes that both depocenters formed synchronously by a process of ”transform-normal parallel extension”, or rifting in a north-south direction orthogonal to the east-west-striking and parallel strike-slip faults.We use more than 4000 km of 2D single- and multi-channel seismic data tied to 11 wells to map 5 tectono-stratigraphic sequences and to produce a series of structural and isopach maps showing how the faults that controlled both Cariaco depocenters evolved from Paleogene to the present. Comparison of fault and isopach maps for dated horizons from Paleogene to late Neogene in age show three main phases in basin development: 1) from middle Miocene to Pliocene, the West Cariaco basin formed as a rhomboidally-shaped pull-apart at a 30-km-wide stepover between the northern branch of the San Sebastian fault and the El Pilar fault zone; 2) during the early Pliocene, a new strike-slip fault transected the West Cariaco basin (southern branch of the San Sebastian fault) and caused extension to cease; and 3) during the early Pliocene to recent, a “lazy-Z” shaped pull-apart formed along the curving connection between the southern branch of the San Sebastian and El Pilar fault zones.  相似文献   

12.
Seven dives in the submersible ALVIN and four deep-towed (ANGUS) camera lowerings have been made at the eastern ridge-transform intersection of the Oceanographer Transform with the axis of the Mid-Atlantic Ridge. These data constrain our understanding of the processes that create and shape the distinctive morphology that is characteristic of slowly-slipping ridge-transform-ridge plate boundaries. Although the geological relationships observed in the rift valley floor in the study area are similar to those reported for the FAMOUS area, we observe a distinct change in the character of the rift valley floor with increasing proximity to the transform. Over a distance of approximately ten kilometers the volcanic constructional terrain becomes increasingly more disrupted by faulting and degraded by mass wasting. Moreover, proximal to the transform boundary, faults with orientations oblique to the trend of the rift valley are recognized. The morphology of the eastern rift valley wall is characterized by inward-facing scarps that are ridge-axis parallel, but the western rift valley wall, adjacent to the active transform zone, is characterized by a complex fault pattern defined by faults exhibiting a wide range of orientations. However, even for transform parallel faults no evidence for strike-slip displacement is observed throughout the study area and evidence for normal (dip-slip) displacement is ubiquitous. Basalts, semi-consolidated sediments (chalks, debris slide deposits) and serpentinized ultramafic rocks are recovered from localities within or proximal to the rift valley. The axis of accretion-principal transform displacement zone intersection is not clearly established, but appears to be located along the E-W trending, southern flank of the deep nodal basin that defines the intersection of the transform valley with the rift floor.  相似文献   

13.
Fault patterns at outer trench walls   总被引：1，自引：0，他引：1  
Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.  相似文献   

14.
Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr-1 at 19°30 S versus 1.6 mm yr-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.  相似文献   

15.
Gas hydrate was discovered in the Krishna–Godavari (KG) Basin during the India National Gas Hydrate Program (NGHP) Expedition 1 at Site NGHP-01-10 within a fractured clay-dominated sedimentary system. Logging-while-drilling (LWD), coring, and wire-line logging confirmed gas hydrate dominantly in fractures at four borehole sites spanning a 500 m transect. Three-dimensional (3D) seismic data were subsequently used to image the fractured system and explain the occurrence of gas hydrate associated with the fractures. A system of two fault-sets was identified, part of a typical passive margin tectonic setting. The LWD-derived fracture network at Hole NGHP-01-10A is to some extent seen in the seismic data and was mapped using seismic coherency attributes. The fractured system around Site NGHP-01-10 extends over a triangular-shaped area of ∼2.5 km2 defined using seismic attributes of the seafloor reflection, as well as “seismic sweetness” at the base of the gas hydrate occurrence zone. The triangular shaped area is also showing a polygonal (nearly hexagonal) fault pattern, distinct from other more rectangular fault patterns observed in the study area. The occurrence of gas hydrate at Site NGHP-01-10 is the result of a specific combination of tectonic fault orientations and the abundance of free gas migration from a deeper gas source. The triangular-shaped area of enriched gas hydrate occurrence is bound by two faults acting as migration conduits. Additionally, the fault-associated sediment deformation provides a possible migration pathway for the free gas from the deeper gas source into the gas hydrate stability zone. It is proposed that there are additional locations in the KG Basin with possible gas hydrate accumulation of similar tectonic conditions, and one such location was identified from the 3D seismic data ˜6 km NW of Site NGHP-01-10.  相似文献   

16.
The Upper Quaternary seismic stratigraphy and active faults of the Gulf of İzmit were investigated by means of high-resolution shallow seismic profiling data in the source region of 1999 İzmit earthquake. High-resolution seismic reflection data correlated with borehole data indicate that the stratigraphy of İzmit Bay consists of three distinct depositional sequences formed in response to middle Pleistocene-Holocene sea-level changes. Reflector R, separating the pre-Holocene sequences (1 and 2) from the Holocene sequence (3), represents an erosional unconformity produced by the subaerial fluvial erosion of the continental shelves at the time of the last glacial maximum. Occasional, anomalous reflections (acoustic turbidity) observed within the Holocene sequence are interpreted as gas accumulations. The maximum thickness of the Holocene sediments is found to be about 25 m. The isopach map of Holocene sediment implies that the thickness of the Holocene decreases from the east towards the central and western basins of İzmit Bay. Two distinct fault systems are interpreted in İzmit Bay. The main fault system extending roughly in an E-W direction along the Gulf of İzmit is an active right lateral strike slip fault with a normal component. The secondary faults are normal faults striking in different directions and these are identified as being both active and inactive. In addition, prominent compressive features are identified in the seismic cross-sections of some profiles acquired to the east of Hersek Peninsula where the focal mechanisms of the aftershocks of the 1999 İzmit earthquake also reveal predominantly reverse faulting mechanisms, as identified by a local dense seismic network.  相似文献   

17.
The paleokarst-unconformity at the top of the Ordovician Yingshan Formation in the central Tarim basin was exposed to air for at least 10 Ma, providing favorable conditions for the later formation of high-quality reservoirs. During the karstification process, the fault system plays an important role in controlling the development of paleokarst. This study characterized the fault system through the paleokarst features on the northern slope of the Tazhong High and examined in detail the impacts of the fault system on paleokarst distribution. Formation Micro-Imager logs and seismic curvature change rate were used for characterizing the fault system in different scales. The results revealed three sets of faults in this region. Cross-cutting relationships, unconformities, and relation between faults and karstification indicate Mid-to-Late Ordovician thrust faults, Silurian-Devonian strike-slip faults, and Permian tension faults. “Bright spots” in seismic records calibrated by Formation Micro-Imager logs were used for indicating paleokarst features and different depth distributions, respectively. Furthermore, the study employed spectral decomposition technique to characterize the morphology of paleocave complexes in detail. The results show the Mid-Late Ordovician thrust faults heavily impacted the distribution of paleokarst mainly distributed along master and secondary thrust faults in shallow areas, as well as along master basement-involved thrust faults in deep strata, and along the most pronounced area of paleokarst, Tazhong No. 10 fault zone bounded by back thrusts. The data provides new forecasting information for deep hydrocarbon exploration in paleokarst-related reservoirs of the Yingshan Formation.  相似文献   

18.
A wealth of geologic information has been collected during studies of the Matuyama/Brunhes magnetic reversal boundary on the East Pacific Rise at 21°N. Five ALVIN and two CYANA dives, and a series of deep-tow traverses show that abyssal hills in this region of the Pacific are created near the spreading axis by inward dipping normal faulting and by back-tilting of these fault blocks. Outward dipping faults occur but are of less importance in the creation of relief. Tectonic disruption of the crust, particularly through tilting, is less pronounced than in the Atlantic. Small volcanoes approximately 50 m high and 400 m wide are common on the abyssal hills. A significant number of the volcanoes may have split apart at the spreading axis attesting to the narrowness of the crustal accretion zone on the East Pacific Rise. Active faulting is restricted to less than 10 to 12 km off-axis, although minor recent faulting may have been detected 23 km off-axis. Crustal sections exposed by faulting reveal that massive lava flows and sheet flows are common in the upper portion of oceanic layer two, but are less abundant than pillow lavas.  相似文献   

19.
The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.  相似文献   

20.
Fault seal due to juxtaposition or the generation of low-permeability fault rock has the potential to change through time with displacement accumulation. Temporal variations in cross-fault flow of hydrocarbons have been assessed for the Cape Egmont Fault (CEF), Taranaki Basin New Zealand, using displacement backstripping, juxtaposition and Shale Gouge Ratio (SGR) analysis. The timing of hydrocarbon migration and charge of the giant Maui Gas-condensate Field across the CEF have been assessed using seismic reflection lines (2D & 3D), coherency cubes, VShale curves from the Maui-2 well and PetroMod modelling. Displacement–backstripping analysis suggests that between the Late Miocene and early Pleistocene (5.5 and 2.1 Ma) sandstone reservoir units of the Maui Field (Mangahewa, Kaimiro and Farewell Formations) and underlying source rocks (Rakopi Formation) were partly juxtaposed across the CEF with low SGRs (< 0.2) present in the fault zone. Following 2.1 Ma SGRs increased to 0.2–0.55 adjacent to the Eocene–Palaeocene reservoir succession which was not in juxtaposed contact with source rocks. PetroMod modelling using these SGR values and juxtaposition relationships supports cross-fault flow prior to 2.1 Ma with later charge across the fault being less likely. Gas chimneys and the gas–water contact in the Eocene reservoir proximal to the fault suggest that despite limited cross-fault flow, upward leakage of hydrocarbons from the reservoir occurred after 2.1 Ma, possibly associated with active fault movement or fracturing related to faulting, and may account for the loss of an early oil phase.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号