首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Cenozoic eastward migration of the Caribbean plate relative to the South American plate is recorded by an 1100-km-long Venezuela-Trinidad foreland basin which is oldest in western Venezuela (65-55 Ma), of intermediate age in eastern Venezuela (34-20 Ma) and youngest beneath the shelf and slope area of eastern offshore Trinidad (submarine Columbus basin, 15.0 Ma-Recent). In this study of the regional structure, fault families, and chronology of faulting and tectonic events affecting the hydrocarbon-rich Columbus foreland basin of eastern offshore Trinidad, we have integrated approximately 775 km of deep-penetration 2D seismic lines acquired by the 2004 Broadband Ocean-Land Investigations of Venezuela and the Antilles arc Region (BOLIVAR) survey, 325 km of vintage GULFREX seismic data collected by Gulf Oil Company in 1974, and published industry well data that can be tied to some of the seismic reflection lines. Top Cretaceous depth structure maps in the Columbus basin made from integration of all available seismic and well data define for the first time the elongate subsurface geometry of the 11-15 km thick and highly asymmetrical middle Miocene-Recent depocenter of the Columbus basin. The main depocenter located 150-200 km east of Trinidad and now the object of deepwater hydrocarbon exploration is completely filled by shelf and deepwater sediments derived mainly from the Orinoco delta. The submarine Darien ridge exhibits moderate (20-140 m) seafloor relief, forms the steep (12°-24°), northern structural boundary of the Columbus basin, and is known from industry wells to be composed of 0.5-4.5 km thick, folded and thrust-imbricated, hydrocarbon-bearing section of Cretaceous and early Tertiary limestones and clastic rocks. The eastern and southern boundaries of the basin are formed by the gently (1.7°-4.5°), northward-dipping Cretaceous-Paleogene passive margin of South America that is in turn underlain by Precambrian rocks of the Guyana shield.Interpretation of seismic sections tied to wells reveals the following fault chronology: (1) middle Miocene thrusting along the Darien ridge related to highly oblique convergence between the Caribbean plate and the passive margin of northern South America; continuing thrusting and transpression in an oblique foreland basin setting through the early Pleistocene; (2) early Pliocene-recent low-angle normal faults along the top of the Cretaceous passive margin; these faults were triggered by oversteepening related to formation of the downdip, structurally and bathymetrically deeper, and more seaward Columbus basin; large transfer faults with dominantly strike-slip displacements connect gravity-driven normal faults that cluster near the modern shelf-slope break and trend in the downslope direction; to the south no normal faults are present because the top Cretaceous horizon has not been oversteepened as it is adjacent to the foreland basin; (3) early Pliocene-Recent strike-slip faults parallel the trend of the Darien ridge and accommodate present-day plate motions.  相似文献   

2.
The Cariaco basin, located ∼40 km off the central part of the coast of Venezuela, is the largest (∼4000 km2) and bathymetrically deepest (1400 m BSL) Neogene fault-bounded basin within the right-lateral strike-slip plate boundary zone that separates the Caribbean and South American plates. Using subsurface geophysical data, we test two previously proposed tectonic models for the age, distribution and nature of east-west-striking, strike-slip faults, and basin-forming mechanism for the two main depocenters of the Cariaco basin. The earliest interpretation for the opening of the twin Cariaco depocenters by Schubert (1982) proposes that both depocenters formed synchronously by extension along transverse (north-south) normal faults at a ∼30-km-wide rhomboidally-shaped pull-apart basin between the right-lateral, east-west-striking, and parallel San Sebastian and El Pilar fault zones. A later model by Ben-Avraham and Zoback (1992) proposes that both depocenters formed synchronously by a process of ”transform-normal parallel extension”, or rifting in a north-south direction orthogonal to the east-west-striking and parallel strike-slip faults.We use more than 4000 km of 2D single- and multi-channel seismic data tied to 11 wells to map 5 tectono-stratigraphic sequences and to produce a series of structural and isopach maps showing how the faults that controlled both Cariaco depocenters evolved from Paleogene to the present. Comparison of fault and isopach maps for dated horizons from Paleogene to late Neogene in age show three main phases in basin development: 1) from middle Miocene to Pliocene, the West Cariaco basin formed as a rhomboidally-shaped pull-apart at a 30-km-wide stepover between the northern branch of the San Sebastian fault and the El Pilar fault zone; 2) during the early Pliocene, a new strike-slip fault transected the West Cariaco basin (southern branch of the San Sebastian fault) and caused extension to cease; and 3) during the early Pliocene to recent, a “lazy-Z” shaped pull-apart formed along the curving connection between the southern branch of the San Sebastian and El Pilar fault zones.  相似文献   

3.
基于2000年5~6月在台湾岛以东海域调查获得的多波束全覆盖测深等地质和地球物理资料,对该海域海底地形特征进行了研究,探讨了构造对海底地形的控制作用及其构造地质意义.研究表明,琉球岛弧岛坡区和琉球海沟表现为典型的西太平洋沟-弧-盆体系控制下的构造地形;台湾岛东部岛坡等深线近南北向平行密集排列,地形坡度大,弧陆碰撞造就了该区独特的地形特征;花东盆地海底峡谷发育,其形成主要受基底起伏和走滑断裂的控制;加瓜海脊东西两侧水深和地形特征明显不同,但其基底可能属于花东盆地,加瓜海脊的东侧对应了两个不同性质板块的边界;西菲律宾海盆表现为北西向线状脊-槽相间排列,并遭受北东向转换断层的切割,根据海底地形、转换断层和磁异常条带的方向推测,研究区海底形成于距今60~45Ma的西菲律宾海盆北东-南西向扩张期.  相似文献   

4.
Eastward migration of the Caribbean plate relative to the South American plate has caused lithospheric loading along the northern margin of South America, which is recorded by an 1100-km-long foreland basin which is oldest in the west (Maracaibo basin, 65-55 Ma) and youngest in the east (Columbus basin, eastern offshore Trinidad, 15-0 Ma). The Orinoco River has been the primary source of sediment for the basin since early Miocene. We have integrated approximately 775 km of deep-penetration 2D seismic lines acquired in the area of eastern offshore Trinidad as part of the 2004 “Broadband Ocean-Land Investigations of Venezuela and the Antilles arc Region” (BOLIVAR) project, 8000 km2 of shallow industry 3D seismic data, and published industry well data from offshore eastern Trinidad. Active mud diapirism in the Columbus basin is widespread and is related to overthrusting and tectono-sedimentary loading of upper Miocene-lower Pliocene age mud. Analysis of the shallow 3D seismic data reveals the presence of extensive gravity-flow depositional elements on the Columbus basin slope and the deepwater area. These stacked gravity-flow deposits are characterized by mass-transport deposits at the base, turbidite frontal-splay deposits, leveed-channel deposits, and capped by fine-grained condensed-section deposits. Exploration targets in the deepwater area are located towards the center of the Columbus basin, where northeast-trending fault-propagation folds are important Plio-Pleistocene trap-forming elements. Deep basin wells drilled in recent years have proven that turbidites were transported into the deepwater Columbus basin during the Plio-Pleistocene. Analysis of these well results suggests that a deeper oil charge is present within the deepwater Columbus basin area. The primary uncertainty for this variable hydrocarbon system is whether fault or diapiric pathways connect or divert the petroleum charge at depth with shallower reservoir rocks.  相似文献   

5.
The Mendocino Fracture Zone, a 3,000-km-long transform fault, extends from the San Andreas Fault at Cape Mendocino, California due west into the central Pacific basin. The shallow crest of this fracture zone, known as the Mendocino Ridge, rises to within 1,100 m of the sea surface at 270 km west of the California Coast. Rounded basalt pebbles and cobbles, indicative of a beach environment, are the dominant lithology at two locations on the crest of Mendocino Ridge and a40Ar/39 Ar incremental heating age of 11.0 ± 1.0 million years was determined for one of the these cobbles. This basalt must have been erupted on the Gorda Ridge because the crust immediately to the south of the fracture zone is older than 27 Ma. This age also implies that the crest of Mendocino Ridge was at sea level and would have blocked Pacific Ocean eastern boundary currents and affected the climate of the North American continent at some time since the late Miocene. Basalts from the Mendocino Fracture Zone (MFZ) are FeTi basalts similar to those commonly found at intersections of mid-ocean ridges and fracture zones. These basalts are chemically distinct from the nearby Gorda Ridge but they could have been derived from the same mantle source as the Gorda Ridge basalts. The location of the 11 Ma basalt suggests that Mendocino Ridge was transferred from the Gorda Plate to the Pacific Plate and the southern end of Gorda Ridge was truncated by a northward jump in the transform fault of MFZ.  相似文献   

6.
The northwestern continental margin of New Zealand offers one of the finest examples of a continent-backarc transform. This transform, part of the Vening Meinesz Fracture Zone (VMFZ), accommodated about 170 km of sea-floor spreading in the Norfolk backare basin together with eastward migration of a volcanic arc, the Three Kings Ridge, in the Mid- to Late Miocene. Before the onset of spreading, strain along the VMFZ may have been linked to a major Early Miocene obduction event — the emplacement of the Northland Allochthon. The transform is manifested by a belt up to 50 km wide of left-stepping, linear fault scarps up to 2000 m high within an approximately 100 km-wide deformed zone. A marginal ridge, the Reinga Ridge, which includes a faulted, folded and uplifted Miocene sedimentary basin, occurs within the high-standing continental side of the deformed zone, whereas a narrow strip of linear detached blocks occupies the deep backarc oceanic side. Prespreading uplift and erosion of crust in the proto-backarc region, are volcanism, and obduction of the allochthon, supplied clastic sediments to the basin on the continental side. This basin was complexly deformed as the transform evolved. The transform was initiated as a dextral strike-slip fault zone, which developed right-branching splays and left-steps along its length, uplifting and cutting the continental margin into left-hand, en echelon blocks and relays. Folds formed locally within relay blocks and at the distal ends of the splays. Only the high continental side of this zone (the Reinga Ridge) remains, the formerly adjacent crust (the Three Kings Ridge) having been displaced towards the southeast. As the Three Kings block moved and the Norfolk Basin opened, opposing rift margins of the backarc basin foundered to form terraces. The oceanic side of the transform also subsided to produce the belt of detached blocks (some laterally displaced by strike slip) and linear troughs along the main escarpment system.  相似文献   

7.
Aruba, Bonaire, and Curaçao are islands aligned along the crest of a 200-km-long segment of the east-west-trending Leeward Antilles ridge within the broad Caribbean-South America plate boundary zone presently characterized by east-west, right-lateral strike-slip motion. The crust of the Leeward Antilles ridge represents the western segment of the Cretaceous-early Cenozoic Great Arc of the Caribbean, which obliquely collided, with the continental margin of northern South America in early Cenozoic time. Following the collision, the ridge was affected by folding and was segmented by oblique, northwest-striking normal faults that have produced steep-sided, northwest-trending, elongate islands and narrow shelves separated by deepwater, sediment-filled and fault-controlled basins. In this paper, we present the first fault slip observations on the Neogene carbonate rocks that cover large areas of all three islands. Our main objective is to quantify the timing and nature of Neogene to Quaternary phases of faulting and folding that have affected the structure and topography of this area including offshore sedimentary basins that are being explored for their petroleum potential. These data constrain three fault phases that have affected Aruba, Bonaire, and Curaçao and likely the adjacent offshore areas: 1) NW-SE-directed late Paleogene compression; 2) middle Miocene syndepositional NNW-SSE to NNE-SSW extension that produced deep rift basins transverse to the east-west-trending Leeward Antilles ridge; and 3) Pliocene-Quaternary NNE-trending compression that produced NW-SE-trending anticlines present on Aruba, Curaçao and Bonaire islands. Our new observations - that include detailed relationships between striated fault planes, paleostress tensors, and bedding planes - show that prominent bedding dips of Neogene limestone on Aruba, Bonaire and Curaçao were produced by regional tectonic shortening across the entire Leeward Antilles ridge rather than by localized, syndepositional effects as proposed by previous workers. We interpret Pliocene-Quaternary NNE-directed shortening effects on the Leeward Antilles ridge as the result of northeastward extrusion or “tectonic escape” of continental areas of western Venezuela combined with southeastward shallow subduction of the Caribbean plate beneath the ridge.  相似文献   

8.
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting.  相似文献   

9.
Between June 2004 and September 2004 a temporary seismic network was installed on the northern insular shelf of Iceland and onshore in north Iceland. The seismic setup aimed at resolving the subsurface structure and, thus, the geodynamical transition from Icelandic crust to typical oceanic crust along Kolbeinsey Ridge. The experiment recorded about 1,000 earthquakes. The region encloses the Tjörnes Fracture Zone containing the Husavik–Flatey strike-slip fault and the extensional seismic Grimsey Lineament. Most of the seismicity occurs in swarms offshore. Preliminary results reveal typical mid-ocean crust north of Grimsey and a heterogeneous structure with major velocity anomalies along the seismic lineaments and north–south trending subsurface features. Complementary bathymetric mapping highlight numerous extrusion features along the Grimsey Lineament and Kolbeinsey Ridge. The seismic dataset promises to deliver new insights into the tectonic framework for earthquakes in an extensional transform zone along the global mid-ocean ridge system.  相似文献   

10.
On the basis of bathymetric data and other geological and geophysical data obtained during the first survey conducted by Chinese Mainland in the area off eastern Taiwan Island from May to June in 2000, the morphological features of the region, the tectonic control to the seafloor topography and their tectonic implication are studied and discussed. The results have revealed that both the slope zone of the Ryukyu arc and the Ryukyu Trench present a typical morphotectonic characteristics controlled by the trench-arc system in the West Pacific Ocean. At the slope of eastern Taiwan Island the isobathic lines parallel to the coastline and distribute densely in nearly N-S direction and the slope gradient of topography is large. Such a unique feature is attributed to the collision of the Luzon arc and Eurasia continent. In the Huatung Basin, turbidity fans and submarine canyons are well developed, the formations of which are mainly related to the steep topography of the slope of the Luzon arc and the abundant s  相似文献   

11.
The location of the India-Arabia plate boundary prior to the formation of the Sheba ridge in the Gulf of Aden is a matter of debate. A seismic dataset crossing the Owen Fracture Zone, the Owen Basin, and the Oman Margin was acquired to track the past locations of the India-Arabia plate boundary. We highlight the composite age of the Owen Basin basement, made of Paleocene oceanic crust drilled on its eastern part, and composed of pre-Maastrichtian continental and oceanic crust overlaid by ophiolites emplaced in Early Paleocene on its western side. A major fossil transform fault system crossing the Owen Basin juxtaposed these two slivers of lithosphere of different ages, and controlled the uplift of marginal ridges along the Oman Margin. This transform system deactivated ∼40 Myrs ago, coeval with the onset of ultra-slow spreading at the Carlsberg Ridge. The transform boundary then jumped to the edge of the present-day Owen Ridge during the Late Eocene-Oligocene period, before seafloor spreading began at the Sheba Ridge. This migration of the plate boundary involved the transfer of a part of the Indian oceanic lithosphere formed at the Carlsberg Ridge to Arabia. This Late Eocene-Oligocene tectonic episode at the India-Arabia plate boundary is synchronous with a global plate reorganization event corresponding to geological events at the Zagros and Himalaya belts. The Owen Ridge uplifted later, in Late Miocene times, and is unrelated to any major migration of the India-Arabia boundary.  相似文献   

12.
The seafloor of the Alboran Sea in the western Mediterranean is disrupted by deformations resulting from convergence between the African and Eurasian plates. Based on a compilation of existing and new multibeam bathymetry data and high-resolution seismic profiles, our main objective was to characterize the most recent structures in the central sector, which depicts an abrupt morphology and was chosen to investigate how active tectonic processes are shaping the seafloor. The Alboran Ridge is the most prominent feature in the Alboran Sea (>130 km in length), and a key element in the Gibraltar Arc System. Recent uplift and deformation in this ridge have been caused by sub-vertical, strike-slip and reverse faults with associated folding in the most recent sediments, their trend shifting progressively from SW–NE to WNW–ESE towards the Yusuf Lineament. Present-day transtensive deformation induces faulting and subsidence in the Yusuf pull-apart basin. The Alboran Ridge and Yusuf fault zones are connected, and both constitute a wide zone of deformation reaching tens of kilometres in width and showing a complex geometry, including different active fault segments and in-relay folds. These findings demonstrate that Recent deformation is more heterogeneously distributed than commonly considered. A narrow SSW–NNE zone with folding and reverse faulting cuts across the western end of the Alboran Ridge and concentrates most of the upper crustal seismicity in the region. This zone of deformation defines a seismogenic, left-lateral fault zone connected to the south with the Al Hoceima seismic swarm, and representing a potential seismic hazard. Newly detected buried and active submarine slides along the Alboran Ridge and the Yusuf Lineament are clear signs of submarine slope instability in this seismically active region.  相似文献   

13.
Exceptionally high shelf-subsidence rates (0.8–6.0+ mm/yr), a marked basinward stepping (to east and northeast) of the paleo-Orinoco shelf prism and post-Pliocene uplift of Trinidad all allow the sedimentary facies, process regime and the evolution of the Late Miocene Orinoco Delta to be evaluated from extensive outcrops along the southwest, and south coasts of Trinidad. The ca. 200 km easterly growth (late Miocene to present) of the Orinoco shelf-margin was generated by repeated cross-shelf, regressive–transgressive transits of the Orinoco Delta system. The studied Late Pliocene segment of this shelf-margin prism allows insight to how this margin was built. The Morne L'Enfer Formation (Late Pliocene) along Cedros Bay and Erin Bay in SW Trinidad, provides a window into the facies and process regime of the ca. 850 m-thick deltaic succession at an inner-shelf location some 100 km landward of the coeval shelf edge. Regressive facies associations include tide-influenced delta-front to prodelta deposits (FA1) within upward coarsening units, shoreface to offshore deposits, possibly with prograding mud cape deposits (FA2), and fluvial distributary channel infills (FA3), as well as muddy sediments of floodbasins and coastal embayments between the distributary channels (FA4), and tide-influenced bay-head delta deposits (FA5). Transgressive facies associations show an overall upward fining of grain size and include inner estuary distributary channels with minimal brackish-water or tidal influence (FA6), transition zone fluvial-tidal distributary channels (FA7), tide-dominated mid-outer estuary channel-bars (FA8), and intertidal to supratidal flat units (FA9). The tidal signals in both deltaic and estuarine units include bi-directional paleocurrents (channels), frequent mud drapes within stacked sets of cross-strata (delta-front), fluid mud layers, flaser, wavy and lenticular bedding, and ubiquitous spring-neap stratal bundling. The tide dominated nature of the paleo-delta in SW Trinidad was likely due to its location within an embayed proto-Columbus Channel, though by analogy with the modern Orinoco Delta, it is predicted that the same succession becomes wave dominated to the east as the delta emerged to the open ocean and approached the outer shelf and shelf-edge region. It is difficult to estimate how much of the abundant mud in the Pliocene deltaic sequences was derived from inner-shelf littoral currents with suspended Amazon River mud. The studied Late Pliocene Morne L'Enfer succession contains some 17 high-frequency transgressive–regressive sequences, each ca. 40–60 m thick, estimated to have an average time duration of 90–120 Ky. By analogy, the last glacial cycle on the Orinoco shelf saw the delta prograding across the 200 km-wide shelf to the shelf edge in ca. 100 Ky, then transgressing back to its present position in 20 Ky. A predicted model of the linkage between the study succession on SW Trinidad and its eastward continuation offshore towards the outer shelf and shelf edge in the Columbus Basin is suggested.  相似文献   

14.
Bathymetric, hydro-acoustic, seismic, submersible, and gravity data are used to investigate the active tectonics of the eastern Blanco Transform Fault Zone (BTFZ). The eastern BTFZ is dominated by the 150 km long transform-parallel Blanco Ridge (BR) which is a right-lateral strike-slip fault bordered to the east and west by the Gorda and Cascadia Depressions. Acoustic locations, fault-parameter information, and slip vector estimates of 43 earthquakes (M w3.8) that occurred along the eastern BTFZ over the last 5 years reveal that the Blanco Ridge is a high-angle right-lateral strike-slip fault, with a small component of dip-slip motion, where the Juan de Fuca plate is the hanging wall relative to the Pacific plate. Furthermore, the Cascadia and Gorda basins are undergoing normal faulting with extension predominantly oblique to the transform trend. Seafloor submersible observations agree with previous hypotheses that the active transform fault trace is the elongate basin that runs the length of the BR summit. Brecciated and undeformed basalt, diabase, and gabbro samples were collected at the four submersible survey sites along the Blanco Ridge. These petrologic samples indicate the Blanco Ridge is composed of an ocean crustal sequence that has been uplifted and highly fractured. The petrologic samples also appear to show an increase in elevation of the crustal section from east to west along the Blanco Ridge, with gabbros exposed at a shallower depth farther west along the southern (Pacific plate side) BR ridge flank. Further supporting evidence for BR uplift exists in the seismic reflection profiles across the BR showing uplift of turbidite sequences along the north and south ridge base, and gravity and magnetics profiles that indicate possible basement uplift and a low-density zone centered on the ridge's Pacific plate side. The BR formation mechanism preferred here is first, uplift achieved partially through strike-slip motion (with a small dip-slip component). Second, seawater penetration along the fault into the lower crust upper mantle, which then enhanced formation and intrusion of a mantle-derived serpentinized-peridotite diapir into the shallow ocean crust, causing further uplift along the fault.  相似文献   

15.
About 16,000 km of multichannel seismic (MCS), gravity and magnetic data and 28 sonobuoys were acquired in the Riiser-Larsen Sea Basin and across the Gunnerus and Astrid Ridges, to study their crustal structure. The study area has contrasting basement morphologies and crustal thicknesses. The crust ranges in thickness from about 35 km under the Riiser-Larsen Sea shelf, 26–28 km under the Gunnerus Ridge, 12–17 km under the Astrid Ridge, and 9.5–10 km under the deep-water basin. A 50-km-wide block with increased density and magnetization is modeled from potential field data in the upper crust of the inshore zone and is interpreted as associated with emplacement of mafic intrusions into the continental margin of the southern Riiser-Larsen Sea. In addition to previously mapped seafloor spreading magnetic anomalies in the western Riiser-Larsen Sea, a linear succession from M2 to M16 is identified in the eastern Riiser-Larsen Sea. In the southwestern Riiser-Larsen Sea, a symmetric succession from M24B to 24n with the central anomaly M23 is recognized. This succession is obliquely truncated by younger lineation M22–M22n. It is proposed that seafloor spreading stopped at about M23 time and reoriented to the M22 opening direction. The seismic stratigraphy model of the Riiser-Larsen Sea includes five reflecting horizons that bound six seismic units. Ages of seismic units are determined from onlap geometry to magnetically dated oceanic basement and from tracing horizons to other parts of the southern Indian Ocean. The seaward edge of stretched and attenuated continental crust in the southern Riiser-Larsen Sea and the landward edge of unequivocal oceanic crust are mapped based on structural and geophysical characteristics. In the eastern Riiser-Larsen Sea the boundary between oceanic and stretched continental crust is better defined and is interpreted as a strike-slip fault lying along a sheared margin.  相似文献   

16.
Using recently gathered onland structural and 2D/3D offshore seismic data in south and central Palawan (Philippines), this paper presents a new perspective in unraveling the Cenozoic tectonic history of the southeastern margin of the South China Sea. South and central Palawan are dominated by Mesozoic ophiolites (Palawan Ophiolite), distinct from the primarily continental composition of the north. These ophiolites are emplaced over syn-rift Eocene turbidites (Panas Formation) along thrust structures best preserved in the ophiolite–turbidite contact as well as within the ophiolites. Thrusting is sealed by Early Miocene (∼20 Ma) sediments of the Pagasa Formation (Isugod Formation onland), constraining the younger limit of ophiolite emplacement at end Late Oligocene (∼23 Ma). The onset of ophiolite emplacement at end Eocene is constrained by thrust-related metamorphism of the Eocene turbidites, and post-emplacement underthrusting of Late Oligocene – Early Miocene Nido Limestone. This carbonate underthrusting at end Early Miocene (∼16 Ma) is marked by the deformation of a seismic unit corresponding to the earliest members of the Early – Middle Miocene Pagasa Formation. Within this formation, a tectonic wedge was built within Middle Miocene (from ∼16 Ma to ∼12 Ma), forming a thrust-fold belt called the Pagasa Wedge. Wedge deformation is truncated by the regionally-observed Middle Miocene Unconformity (MMU ∼12 Ma). A localized, post-kinematic extension affects thrust-fold structures, the MMU, and Late Miocene to Early Pliocene carbonates (e.g. Tabon Limestone). This structural set-up suggests a continuous convergent regime affecting the southeastern margin of the South China Sea between end Eocene to end Middle Miocene. The ensuing structures including juxtaposed carbonates, turbidites and shallow marine clastics within thrust-fold belts have become ideal environments for hydrocarbon generation and accumulation. Best developed in the Northwest Borneo Trough area, the intensity of thrust-fold deformation decreases towards the northeast into offshore southwest Palawan.  相似文献   

17.
The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.  相似文献   

18.
A high-resolution marine geophysical study was conducted during October-November 2006 in the northern Gulf of Aqaba/Eilat, providing the first multibeam imaging of the seafloor across the entire gulf head spanning both Israeli and Jordanian territorial waters. Analyses of the seafloor morphology show that the gulf head can be subdivided into the Eilat and Aqaba subbasins separated by the north-south-trending Ayla high. The Aqaba submarine basin appears starved of sediment supply, apparently causing erosion and a landward retreat of the shelf edge. Along the eastern border of this subbasin, the shelf is largely absent and its margin is influenced by the Aqaba Fault zone that forms a steep slope partially covered by sedimentary fan deltas from the adjacent ephemeral drainages. The Eilat subbasin, west of the Ayla high, receives a large amount of sediment derived from the extensive drainage basins of the Arava Valley (Wadi ’Arabah) and Yutim River to the north–northeast. These sediments and those entering from canyons on the south-western border of this subbasin are transported to the deep basin by turbidity currents and gravity slides, forming the Arava submarine fan. Large detached blocks and collapsed walls of submarine canyons and the western gulf margin indicate that mass wasting may be triggered by seismic activity. Seafloor lineaments defined by slope gradient analyses suggest that the Eilat Canyon and the boundaries of the Ayla high align along north- to northwest-striking fault systems—the Evrona Fault zone to the west and the Ayla Fault zone to the east. The shelf–slope break that lies along the 100 m isobath in the Eilat subbasin, and shallower (70–80 m isobaths) in the Aqaba subbasin, is offset by approx. 150 m along the eastern edge of the Ayla high. This offset might be the result of horizontal and vertical movements along what we call the Ayla Fault on the east side of the structure. Remnants of two marine terraces at 100 m and approx. 150 m water depths line the southwest margin of the gulf. These terraces are truncated by faulting along their northern end. Fossil coral reefs, which have a similar morphological appearance to the present-day, basin margin reefs, crop out along these deeper submarine terraces and along the shelf–slope break. One fossil reef is exposed on the shelf across the Ayla high at about 60–63 m water depth but is either covered or eroded in the adjacent subbasins. The offshore extension of the Evrona Fault offsets a fossil reef along the shelf and extends south of the canyon to linear fractures on the deep basin floor.  相似文献   

19.
Using a mega-regional dataset that includes over 20,000 km of on- and offshore 2D seismic lines and 12 wells, we illustrate three different stages of fault formation and basin evolution in the Caribbean arc-South American continent collisional zone. Transpressional deformation associated with oblique collision of the Caribbean arc migrates diachronously over a distance of ∼1500 km from western Venezuela in Paleogene time (∼57 Ma) to a zone of active deformation in the eastern offshore Trinidad area. Each diachronous stage of pre-, syn-, and post-collisional basin formation is accompanied by distinct patterns of fault families. We use subsidence histories from wells to link patterns of long-term basinal subsidence to periods of activity of the fault families.

Stage one of arc-continent collision

Initial collision is characterized by overthrusting of the south- and southeastward-facing Caribbean arc and forearc terranes onto the northward-subducting Mesozoic passive margin of northern South America. Northward flexure of the South American craton produces a foreland basin between the thrust front and the downward-flexed continental crust that is initially filled by clastic sediments shed both from the colliding arc and cratonic areas to the south. As the collision extends eastward towards Trinidad, this same process continues with progressively younger foreland basins formed to the east. On the overthrusting Caribbean arc and forearc terranes, north-south rifting adjacent to the collision zone initiates and is controlled by forward momentum of southward-thrusting arc terranes combined with slab pull of the underlying and subducting, north-dipping South American slab. Uplift of fold-thrust belts arc-continent suture induces rerouting of large continental drainages parallel to the collisional zone and to the axis of the foreland basins.

Stage two

This late stage of arc-continent collision is characterized by termination of deformation in one segment of the fold-thrust belt as convergent deformation shifts eastward. Rebound of the collisional belt is produced as the north-dipping subducted oceanic crust breaks off from the passive margin, inducing inversion of preexisting normal faults as arc-continent convergence reaches a maximum. Strain partitioning also begins to play an important role as oblique convergence continues, accommodating deformation by the formation of parallel, strike-slip fault zones and backthrusting (southward subduction of the Caribbean plate beneath the South Caribbean deformed belt). As subsidence slows in the foreland basins, sedimentation transitions from a marine underfilled basin to an overfilled continental basin. Offshore, sedimentation is mostly marine, sourced by the collided Caribbean terranes, localized islands and carbonate deposition.

Stage three

This final stage of arc-continent collision is characterized by: 1) complete slab breakoff of the northward-dipping South American slab; 2) east-west extension of the Caribbean arc as it elongates parallel to its strike forming oblique normal faults that produce deep rift and half-grabens; 3) continued strain partitioning (strike-slip faulting and folding). The subsidence pattern in the Caribbean basins is more complex than interpreted before, showing a succession of extensional and inversion events. The three tectonic stages closely control the structural styles and traps, source rock distribution, and stratigraphic traps for the abundant hydrocarbon resources of the on- and offshore areas of Venezuela and Trinidad.  相似文献   

20.
Seismic stratigraphic and structural analyses of the northwest Phu Khanh Basin, offshore Central Vietnam, based on 2-D seismic data, indicate that the initial rifting began during the latest Cretaceous? or Palaeogene controlled by left-lateral transtension along the East Vietnam Boundary Fault Zone (EVBFZ) and northwest–southeast directed extension east of the EVBFZ. Rifting stopped due to transpression during middle Oligocene times but resumed by left-lateral transtension during the Late Oligocene. Thick sequences of lacustrine and alluvial sediments were deposited during the Palaeogene rift periods. The Late Oligocene rifting ended due to inversion, triggered by right-lateral wrenching near the Palaeogene–Neogene boundary. Following the onset of this inversion regional uplift and volcanism took place in the southern half of the study area and contemporaneous subsidence and transgression took place farther north, leading to widespread carbonate deposition. As the right-lateral wrenching decreased during the early Neogene, thermal subsidence and siliciclastic sedimentation became dominant, resulting in the buildup and southward propagation of the shelf slope. Sediment accumulation and subsidence rates increased after the Middle Miocene times due to eastward tilting of Central Vietnam and the adjacent offshore area.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号