首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 640 毫秒
1.
Polyphase metamorphism and the development of the Main Central Thrust   总被引：2，自引：0，他引：2  
ABSTRACT Along a cross-section through the Lesser and Higher Himalayan units at the Kishtwar window area (north-west India), a polyphase, Barrovian-type metamorphism has been delineated in relation to the development of the Main Central Thrust (MCT). In the metapelitic mineral assemblages, three metamorphic phases have been distinguished:
  • (a) conditions up to amphibolite grade at moderate to high pressures (alm + rut + ilm + kya + qtz) characterize the M1 phase;
  • (b) pressure release and/or temperature increase as a result of movement along the MCT and the formation of gneiss domes in the Higher Himalaya, as expressed by oriented (N70°-100° E) fibrolite, defines the M2 phase; and,
  • (c) finally during uplift of the Kishtwar window area, a retrogressive M3 phase is characterized by the assemblage quartz-muscovite-chlorite.
Both optically zoned and single-stage garnets have been examined with the electron microprobe to determine their element partitioning. Normal zoning has been found in samples below the MCT in the Lesser Himalaya, indicating prograde growth during the M2 phase, whereas tectonically above, in the Higher Himalaya unit, the garnets reveal double-stage growth with a complex zoning pattern due to reaction-partitioning during M1 and M2 and reverse-zoning at their rims during the retrogressive M3 phase. Geothermometry on metapelites along a cross-section through the MCT zone and the Higher Himalaya imply distinct readjustments of garnet-biotite exchange equilibria and indicate isothermal conditions (500-600° C) throughout the section during the M3 retrogression. Pressure calculations (gro-an-kya-qtz and alm-rut-ilm-kya-qtz) suggest a decrease in pressure towards the top of the section (6-7.5 to 4.5-5 kbar), as corroborated by fibrolite replacing kyanite. The spatially inverse metamorphism exposed within the Lesser Himalaya of the Kishtwar window is regarded as a product of polyphase metamorphism combined with ongoing thrusting and shearing and is reflected by condensed M2 isograds around the Kishtwar window.  相似文献   

2.
ABSTRACT The Main Central Thrust (MCT) south of Mt Everest in eastern Nepal is a 3 to 5km thick shear zone separating chlorite-bearing schist in the lower plate from sillimanite-bearing migmatitic gneiss in the overlying Tibetan Slab. The metamorphic grade increases through the MCT zone toward structurally higher levels. Previous workers have suggested that either post- or synmetamorphic thrust movement has caused this inversion of metamorphic isograds. In an effort to quantify the increase in grade and to constrain proposed structural relations between metamorphism and slip on the fault, four well-calibrated thermobarometers were applied to pelitic samples collected along two cross-strike transects through the MCT zone and Tibetan Slab. Results show an increase in apparent temperature up-section in the MCT zone from 778 K to 990 K and a decrease in temperature to ∼850 K in the lower Tibetan Slab, which is consistent with synmetamorphic thrust movement. A trend in calculated pressures across this section is less well-defined but, on average, decreases up-section with a gradient of ∼28MPa/km, resembling a lithostatic gradient. Pressure-temperature paths for zoned garnets from samples within the MCT zone, modelled using the Gibbs' Method, show a significant decrease in temperature and a slight decrease in pressure from core to rim, which might be expected for upper plate rocks during synmetamorphic thrust movement. Samples from the uppermost Tibetan Slab yield higher temperatures and pressures than those from the lower Tibetan Slab, which may be evidence for later‘resetting’ of thermobarometers by intrusion of the large amounts of leucogranite at that structural level.  相似文献   

3.
POLYPHASE METAMORPHISM AND INVERTED THERMAL GRADIENT IN THE LESSER HIMALAYA OF CENTRAL NEPAL: CONSTRAINTS FROM WHITE MICA COMPOSITIONS  相似文献   

4.
GEOLOGY OF THE NORTHERN ARUN TECTONIC WINDOW1　BordetP .Recherchesg啨ｏｌｏｇｉｑｕｅｓｄａｎｓｌ’ＨｉｍａｌａｙａｄｕＮ啨ｐａｌ,r啨ｇｉｏｎｄｕＭａｋａｌｕ[R].EditionsduCNRS ,Paris ,196 12 75 . 2　BordetP .G啨ｏｌｏｇｉｅｄｅｌａｄａｌｌｅｄｕＴｉｂｅｔ (Himalayacentral) [J].M啨ｍｏｉｒｅｓｈｏｒｓｓ啨ｒｉｅｄｅｌａＳｏｃｉｅｔ啨ｇ啨ｏｌｏｇｉｑｕｅｄｅＦｒａｎｃｅ,1977,8:2 35～ 2 5 0 . 3　BurcfielBC ,ChenZ ,HodgesKV ,etal.TheSouthTibetanDetachmentSystem ,Hima…  相似文献   

5.
This paper summarizes the studies of the metamorphic evolution of Central Nepal carried out by Nepali and international teams in the last 25 years. In Central Nepal, three metamorphic units are recognized. (1) The southernmost zone is the Lesser Himalaya, which is characterised by an inverted mineral zoning towards the Main Central Thrust (MCT) zone; (2) the Kathmandu nappe corresponds to an early (<22 Ma) out-of-sequence thrusting zone over the Lesser Himalaya along the Mahabharat thrust (MT) and is characterised by a Barrovian metamorphic evolution; (3) the Higher Himalayan Crystalline unit (HHC) is bounded at its base by the MCT and at its top by the South Tibetan Detachment system (STDS). It is characterised by successive tectonometamorphic episodes during the period spanning from 35–36 Ma to 2–3 Ma. Recent investigations suggest that the apparent metamorphic inversion througout the MCT zone does not reflect geothermal inversion. Instead, these investigations suggest successive cooling of the HHC along the MCT and the local preservation, above the MCT, of high-grade metamorphic rocks. The overall metamorphic history in Central Nepal from Oligocene to Pliocene, reflects the thermal reequilibration of rocks after thickening by conductive and advective heating and partial melting of the middle crust.  相似文献   

6.
The Lesser Himalaya in central Nepal consists of Precambrian to early Paleozoic, low- to medium-grade metamorphic rocks of the Nawakot Complex, unconformably overlain by the Upper Carboniferous to Lower Miocene Tansen Group. It is divided tectonically into a Parautochthon, two thrust sheets (Thrust sheets I and II), and a wide shear zone (Main Central Thrust zone) from south to north by the Bari Gad–Kali Gandaki Fault, the Phalebas Thrust and the Lower Main Central Thrust, respectively. The Lesser Himalaya is overthrust by the Higher Himalaya along the Upper Main Central Thrust (UMCT). The Lesser Himalaya forms a foreland-propagating duplex structure, each tectonic unit being a horse bounded by imbricate faults. The UMCT and the Main Boundary Thrust are the roof and floor thrusts, respectively. The duplex is cut-off by an out-of-sequence fault. At least five phases of deformation (D1–D5) are recognized in the Lesser Himalaya, two of which (D1 and D2) belong to the pre-Himalayan (pre-Tertiary) orogeny. Petrographic, microprobe and illite crystallinity data show polymetamorphic evolution of the Lesser and Higher Himalayas in central Nepal. The Lesser Himalaya suffered a pre-Himalayan (probably early Paleozoic) anchizonal prograde metamorphism (M0) and a Neohimalayan (syn- to post-UMCT) diagenetic to garnet grade prograde inverted metamorphism (M2). The Higher Himalaya suffered an Eohimalayan (pre or early-UMCT) kyanite-grade prograde metamorphism (M1) which was, in turn, overprinted by Neohimalayan (syn-UMCT) retrograde metamorphism (M2). The isograd inversion from garnet zone in the Lesser Himalaya to kyanite zone in the Higher Himalaya is only apparent due to post-metamorphic thrusting along the UMCT. Both the Lesser and Higher Himalayas have undergone late-stage retrogression (M3) during exhumation.  相似文献   

7.
Nepal can be divided into the following five east–west trending major tectonic zones. (i) The Terai Tectonic Zone which consists of over one km of Recent alluvium concealing the Churia Group (Siwalik equivalents) and underlying rocks of northern Peninsular India. Recently active southward-propagating thrusts and folds beneath the Terai have affected both the underlying Churia and the younger sediments. (ii) The Churia Zone, which consists of Neogene to Quaternary foreland basin deposits and forms the Himalayan mountain front. The Churia Zone represents the most tectonically active part of the Himalaya. Recent sedimentologic, geochronologic and paleomagnetic studies have yielded a much better understanding of the provenance, paleoenvironment of deposition and the ages of these sediments. The Churia Group was deposited between ∼14 Ma and ∼1 Ma. Sedimentary rocks of the Churia Group form an archive of the final drama of Himalayan uplift. Involvement of the underlying northern Peninsular Indian rocks in the active tectonics of the Churia Zone has also been recognised. Unmetamorphosed Phanerozoic rocks of Peninsular India underlying the Churia Zone that are involved in the Himalayan orogeny may represent a transitional environment between the Peninsula and the Tethyan margin of the continent. (iii) The Lesser Himalayan Zone, in which mainly Precambrian rocks are involved, consists of sedimentary rocks that were deposited on the Indian continental margin and represent the southernmost facies of the Tethyan sea. Panafrican diastrophism interrupted the sedimentation in the Lesser Himalayan Zone during terminal Precambrian time causing a widespread unconformity. That unconformity separates over 12 km of unfossiliferous sedimentary rocks in the Lesser Himalaya from overlying fossiliferous rocks which are >3 km thick and range in age from Permo-Carboniferous to Lower to Middle Eocene. The deposition of the Upper Oligocene–Lower Miocene fluvial Dumri Formation records the emergence of the Himalayan mountains from under the sea. The Dumri represents the earliest foreland basin deposit of the Himalayan orogen in Nepal. Lesser Himalayan rocks are less metamorphosed than the rocks of the overlying Bhimphedis nappes and the crystalline rocks of the Higher Himalayan Zone. A broad anticline in the north and a corresponding syncline in the south along the Mahabharat range, as well as a number of thrusts and faults are the major structures of the Lesser Himalayan Zone which is thrust over the Churia Group along the Main Boundary Thrust (MBT). (iv) The crystalline high-grade metamorphic rocks of the Higher Himalayan Zone form the backbone of the Himalaya and give rise to its formidable high ranges. The Main Central Thrust (MCT) marks the base of this zone. Understanding the origin, timing of movement and associated metamorphism along the MCT holds the key to many questions about the evolution of the Himalaya. For example: the question of whether there is only one or whether there are two MCTs has been a subject of prolonged discussion without any conclusion having been reached. The well-known inverted metamorphism of the Himalaya and the late orogenic magmatism are generally attributed to movement along the MCT that brought a hot slab of High Himalayan Zone rocks over the cold Lesser Himalayan sequence. Harrison and his co-workers, as described in a paper in this volume, have lately proposed a detailed model of how this process operated. The rocks of the Higher Himalayan Zone are generally considered to be Middle Cambrian to Late Proterozoic in age. (v) The Tibetan Tethys Zone is represented by Cambrian to Cretaceous-Eocene fossiliferous sedimentary rocks overlying the crystalline rocks of the Higher Himalaya along the Southern Tibetan Detachment Fault System (STDFS) which is a north dipping normal fault system. The fault has dragged down to the north a huge pile of the Tethyan sedimentary rocks forming some of the largest folds on the Earth. Those sediments are generally considered to have been deposited in a more distal part of the Tethys than were the Lesser Himalayan sediments.The present tectonic architecture of the Himalaya is dominated by three master thrusts: the Main Central Thrust (MCT), the Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). The age of initiation of these thrusts becomes younger from north to south, with the MCT as the oldest and the MFT as the youngest. All these thrusts are considered to come together at depth in a flat-lying decollement called the Main Himalayan Thrust (MHT). The Mahabharat Thrust (MT), an intermediate thrust between the MCT and the MBT is interpreted as having brought the Bhimphedi Group out over the Lesser Himalayan rocks giving rise to Lesser Himalayan nappes containing crystalline rocks. The position of roots of these nappes is still debated. The Southern Tibetan Detachment Fault System (STDFS) has played an important role in unroofing the higher Himalayan crystalline rocks.  相似文献   

8.
DIFFERENT VARIETIES OF MIOCENE LEUCOGRANITE IN THE ARUN VALLEY—EVEREST—MAKALU AREA:FIELD RELATIONS, PETROLOGY AND ISOTOPE GEOCHEMISTRY1　AritaK .OriginoftheinvertedmetamorphismoftheLowerHimalayas,CentralNepal[J] .Tectonophysics,1983,93:4 3～6 0 . 　BarbarinB .Areviewoftherelationshipsbetweengranitoidtypes,theiroriginsandtheirgeodynamicenvironments[J] .Lithos,1999,4 6 :6 0 5～ 6 2 6 . 3　BurchfielBC ,ChenZ,HodgesKV ,etal.TheSou…  相似文献   

9.
Geothermometry and mineral assemblages show an increase of temperature structurally upwards across the Main Central Thrust (MCT); however, peak metamorphic pressures are similar across the boundary, and correspond to depths of 35–45 km. Garnet‐bearing samples from the uppermost Lesser Himalayan sequence (LHS) yield metamorphic conditions of 650–675 °C and 9–13 kbar. Staurolite‐kyanite schists, about 30 m above the MCT, yield P‐T conditions near 650 °C, 8–10 kbar. Kyanite‐bearing migmatites from the Greater Himalayan sequence (GHS) yield pressures of 10–14 kbar at 750–800 °C. Top‐to‐the‐south shearing is synchronous with, and postdates peak metamorphic mineral growth. Metamorphic monazite from a deformed and metamorphosed Proterozoic gneiss within the upper LHS yield U/Pb ages of 20–18 Ma. Staurolite‐kyanite schists within the GHS, a few metres above the MCT, yield monazite ages of c. 22 ± 1 Ma. We interpret these ages to reflect that prograde metamorphism and deformation within the Main Central Thrust Zone (MCTZ) was underway by c. 23 Ma. U/Pb crystallization ages of monazite and xenotime in a deformed kyanite‐bearing leucogranite and kyanite‐garnet migmatites about 2 km above the MCT suggest crystallization of partial melts at 18–16 Ma. Higher in the hanging wall, south‐verging shear bands filled with leucogranite and pegmatite yield U/Pb crystallization ages for monazite and xenotime of 14–15 Ma, and a 1–2 km thick leucogranite sill is 13.4 ± 0.2 Ma. Thus, metamorphism, plutonism and deformation within the GHS continued until at least 13 Ma. P‐T conditions at this time are estimated to be 500–600 °C and near 5 kbar. From these data we infer that the exhumation of the MCT zone from 35 to 45 km to around 18 km, occurred from 18 to 16 to c. 13 Ma, yielding an average exhumation rate of 3–9 mm year?1. This process of exhumation may reflect the ductile extrusion (by channel flow) of the MCTZ from between the overlying Tibetan Plateau and the underthrusting Indian plate, coupled with rapid erosion.  相似文献   

10.
Thermobarometric data and compositional zoning of garnet show the discontinuities of both metamorphic pressure conditions at peak‐T and P–T paths across the Main Central Thrust (MCT), which juxtaposes the high‐grade Higher Himalayan Crystalline Sequences (HHCS) over the low‐grade Lesser Himalaya Sequences (LHS) in far‐eastern Nepal. Maximum recorded pressure conditions occur just above the MCT (～11 kbar), and decrease southward to ～6 kbar in the garnet zone and northward to ～7 kbar in the kyanite ± staurolite zone. The inferred nearly isothermal loading path for the LHS in the staurolite zone may have resulted from the underthrusting of the LHS beneath the HHCS. In contrast, the increasing temperature path during both loading and decompression (i.e. clockwise path) from the lowermost HHCS in the staurolite to kyanite ± staurolite transitional zone indicates that the rocks were fairly rapidly buried and exhumed. Exhumation of the lowermost HHCS from deeper crustal depths than the flanking regions, recording a high field pressure gradient (～1.2–1.6 kbar km?1) near the MCT, is perhaps caused by ductile extrusion along the MCT, not the emplacement along a single thrust, resulting in the P–T path discontinuities. These observations are consistent with the overall scheme of the model of channel flow, in which the outward flowing ‘HHCS’ and inward flowing ‘LHS’ are juxtaposed against each other and are rapidly extruded together along the ‘MCT’. A rapid exhumation by channel flow in this area is also suggested by a nearly isothermal decompression path inferred from cordierite corona surrounding garnet in gneiss of the upper HHCS. However, peak metamorphic temperatures show a progressive increase of temperature structurally upward (～570–740 °C) near the MCT and roughly isothermal conditions (～710–810 °C) in the upper structural levels of the HHCS. The observed field temperature gradient is much lower than those predicted in channel flow models. However, the discrepancy could be resolved by taking into account heat advection by melt and/or fluid migration, as these can produce low or nearly no field temperature gradient in the exhumed midcrust, as observed in nature.  相似文献   

11.
One of the Pre-Siwalik foreland basin sedimentary units, the Dumri Formation, is tectonically covered by the Lesser Himalayan Crystalline nappe and the Kuncha-Naudanda thrust sheet. It is narrowly distributed in the eastern margin of the Karnali klippe along the NNE–SSW trending Chakure Fault. The whole sequence of the fluvial Dumri Formation attaining 1500 m in thickness is weakly metamorphosed to muscovite phyllite and foliated phyllitic sandstone. The metamorphic grade decreases stratigraphically downward and underlying Nummulitic limestone of the middle Eocene Bhainskati Formation is converted into a slaty limestone. No metamorphic mica is detected from the late Cretaceous to Paleocene Amile Formation below the Bhainskati Formation. These facts indicate that the Tansen Group has undergone inverted metamorphism.A 40Ar/39Ar plateau age of 25.69±0.13 Ma was obtained from garnetiferous biotite gneiss in the lower part of the crystalline nappe. Another 40Ar/39Ar age spectrum from muscovite phyllite of the Dumri Formation suggests that metamorphism occurred at 16–17 Ma. The origin of the inverted metamorphism limited to the uppermost part of the Lesser Himalayan autochthon can be attributed to heat from the hot crystalline nappe and shearing along the sole thrust of the Kuncha-Naudanda thrust sheet. The depositional age of the Dumri Formation is estimated to be 26–17 Ma.Provenance of the Dumri Formation is considered to be from the Naudanda Quartzite, the Kuncha Formation and the Tibetan Tethys sediments, because the sandstone contains orthoquartzite pebbles, phyllitic lithic fragments and a sparry calcite cement. The sedimentary facies indicates deposition by meandering rivers on flood-plains in the distal part of the foreland basin. No proximal facies, such as alluvial fan and pebbly braided river deposits, could be detected from the formation, though it is near the Main Central Thrust (MCT). The northern continuation of the foreland basin sediments must be concealed beneath the Higher Himalayan Crystalline. Judging from the present distribution of the Dumri Formation from the south of the Main Boundary Thrust (MBT) to near the MCT and from the shortening of the Lesser Himalayan sediments by thrusts and folds, the width of the foreland basin where the Dumri Formation was deposited is estimated to have been more than 300 km.  相似文献   

12.
Thermal model for the Zanskar Himalaya   总被引：8，自引：0，他引：8  
ABSTRACT Crustal thickening along the northern margin of the Indian plate, following the 50 Ma collision along the Indus Suture Zone in Ladakh, caused widespread high-temperature, medium-pressure Barrovian facies series metamorphism and anatexis. In the Zanskar Himalaya metamorphic isograds are inverted and structurally telescoped along the Main Central Thrust (MCT) Zone at the base of the High Himalayan slab. Along the Zanskar valley at the top of the slab, isograds are the right way-up and are also telescoped along northeast-dipping normal faults of the Zanskar Shear Zone (ZSZ), which are related to culmination collapse behind the Miocene Himalayan thrust front. Between the MCT and the ZSZ a metamorphic-anatectic core within sillimanite grade rocks contains abundant leucogranite-granite crustal melts of probable Himalayan age. A thermal model based on a crustal-scale cross-section across the Zanskar Himalaya suggests that M1 isograds, developed during early Himalayan Barrovian metamorphism, were overprinted during high-grade MCT-related anatexis and folded around a large-scale recumbent fold developed in the hanging wall of the MCT.  相似文献   

13.
The series of four different, steeply inclined thrusts which sharply sever the youthful autochthonous Cenozoic sedimentary zone, including the Siwalik, from the mature old Lesser Himalayan subprovince is collectively known as the Main Boundary Thrust (MBT). In the proximity of this trust in northwestern and eastern sectors, the parautochtonous Lesser Himalayan sedimentary formations are pushed up and their narrow frontal parts split into imbricate sheets with attendant repetition and inversion of lithostratigraphic units. The superficially steeper thrust plane seems to flatten out at depth. The MBT is tectonically and seismically very active at the present time.The Main Central Thrust (MCT), inclined 30° to 45° northwards, constitutes the real boundary between the Lesser and Great Himalaya. Marking an abrubt change in the style and orientation of structures and in the grade of metamorphism from lower amphibolitefacies of the Lesser Himalayan to higher metamorphic facies of the Great Himalayan, the redefined Main Central Thrust lies at a higher level as that originally recognized by A. Heim and A. Gansser. They had recognized this thrust as the contact of the mesozonal metamorphics against the underlying sedimentaries or epimetamorphics. It has now been redesignated as the Munsiari Thrust in Kumaun. It extends northwest in Himachal as the Jutogh Thrust and farther in Kashmir as the Panjal Thrust. In the eastern Himalaya the equivalents of the Munsiari Thrust are known as the Paro Thrust and the Bomdila Thrust. The upper thrust surface in Nepal is recognized as the Main Central Thrust by French and Japanese workers. The easterly extension of the MCT is known as the Khumbu Thrust in eastern Nepal, the Darjeeling Thrust in the Darjeeling-Sikkim region, the Thimpu Thrust in Bhutan and the Sela Thrust in western Arunachal. Significantly, hot springs occur in close proximity to this thrust in Kumaun, Nepal and Bhutan. There are reasons to believe that movement is taking place along the MCT, although seismically it is less active than the MBT.  相似文献   

14.
Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.  相似文献   

15.
The Ramgarh–Munsiari thrust is a major orogen-scale fault that extends for more than 1,500 km along strike in the Himalayan fold-thrust belt. The fault can be traced along the Himalayan arc from Himachal Pradesh, India, in the west to eastern Bhutan. The fault is located within the Lesser Himalayan tectonostratigraphic zone, and it translated Paleoproterozoic Lesser Himalayan rocks more than 100 km toward the foreland. The Ramgarh–Munsiari thrust is always located in the proximal footwall of the Main Central thrust. Northern exposures (toward the hinterland) of the thrust sheet occur in the footwall of the Main Central thrust at the base of the high Himalaya, and southern exposures (toward the foreland) occur between the Main Boundary thrust and Greater Himalayan klippen. Although the metamorphic grade of rocks within the Ramgarh–Munsiari thrust sheet is not significantly different from that of Greater Himalayan rock in the hanging wall of the overlying Main Central thrust sheet, the tectonostratigraphic origin of the two different thrust sheets is markedly different. The Ramgarh–Munsiari thrust became active in early Miocene time and acted as the roof thrust for a duplex system within Lesser Himalayan rocks. The process of slip transfer from the Main Central thrust to the Ramgarh–Munsiari thrust in early Miocene time and subsequent development of the Lesser Himalayan duplex may have played a role in triggering normal faulting along the South Tibetan Detachment system.  相似文献   

16.
MAIN CENTRAL THRUST ZONE IN THE KATHMANDU AREA, CENTRAL NEPAL, AND ITS TECTONIC SIGNIFICANCE1　AritaK ,LallmeyerRD ,TakasuA .TectonothermalevolutionoftheLesserHimalaya ,Nepal:constraintsfrom 4 0 Ar/3 9AragesfromtheKathmandunappe[J].TheIslandArc ,1997,6 :372～ 384. 2　RaiSM ,GuillotS ,LeFortP ,etal.Pressure temperatureevolutionintheKathmanduandGosainkundregions ,CentralNepal[J].JourAsianEarthSci ,1998,16 :2 83～ 2 98. 3　SchellingD ,KArita .…  相似文献   

17.
The metamorphic core of the Himalaya in the Kali Gandaki valley of central Nepal corresponds to a 5-km-thick sequence of upper amphibolite facies metasedimentary rocks. This Greater Himalayan Sequence (GHS) thrusts over the greenschist to lower amphibolite facies Lesser Himalayan Sequence (LHS) along the Lower Miocene Main Central Thrust (MCT), and it is separated from the overlying low-grade Tethyan Zone (TZ) by the Annapurna Detachment. Structural, petrographic, geothermobarometric and thermochronological data demonstrate that two major tectonometamorphic events characterize the evolution of the GHS. The first (Eohimalayan) episode included prograde, kyanite-grade metamorphism, during which the GHS was buried at depths greater than c. 35 km. A nappe structure in the lowermost TZ suggests that the Eohimalayan phase was associated with underthrusting of the GHS below the TZ. A c. 37 Ma 40Ar/39Ar hornblende date indicates a Late Eocene age for this phase. The second (Neohimalayan) event corresponded to a retrograde phase of kyanite-grade recrystallization, related to thrust emplacement of the GHS on the LHS. Prograde mineral assemblages in the MCT zone equilibrated at average T =880 K (610 °C) and P =940 MPa (=35 km), probably close to peak of metamorphic conditions. Slightly higher in the GHS, final equilibration of retrograde assemblages occurred at average T =810 K (540 °C) and P=650 MPa (=24 km), indicating re-equilibration during exhumation controlled by thrusting along the MCT and extension along the Annapurna Detachment. These results suggest an earlier equilibration in the MCT zone compared with higher levels, as a consequence of a higher cooling rate in the basal part of the GHS during its thrusting on the colder LHS. The Annapurna Detachment is considered to be a Neohimalayan, synmetamorphic structure, representing extensional reactivation of the Eohimalayan thrust along which the GHS initially underthrust the TZ. Within the upper GHS, a metamorphic discontinuity across a mylonitic shear zone testifies to significant, late- to post-metamorphic, out-of-sequence thrusting. The entire GHS cooled homogeneously below 600–700 K (330–430 °C) between 15 and 13 Ma (Middle Miocene), suggesting a rapid tectonic exhumation by movement on late extensional structures at higher structural levels.  相似文献   

18.
We present the results of a structural transect in Lower Dolpo, cross-cutting the upper part of the Lesser Himalaya (LH), the Higher Himalayan Crystallines (HHC) and the lower part of the Tibetan Sedimentary Sequence (TSS). The MCT zone affects the upper part of the LH as well as the lower part of the HHC and shows a later brittle reactivation. Mean vorticity in the MCT points to non-coaxial deformation. These data, together with available kinematic data along the belt, on the South Tibetan Detachment System (STDS) and in the core of the HHC, point to increasing simple shear toward the tectonic boundaries. A top-to-the-SW high-temperature shear zone (Toijem Shear Zone) is recognized in the middle part of the HHC at the boundary between Units 1 and 2. It developed during the earlier stages of exhumation of the HHC, enhancing the decompression of the hanging wall and the emplacement of leucogranite dykes and sills. Its development could be explained by a change in the velocity profile during the extrusion of the HHC, triggered by first order changes in rock types of the tectonic unit. The STDS is marked by a wide zone of high strain and by a metamorphic jump from amphibolite facies in the carbonate rocks of the upper part of the HHC to greenschist facies marbles in the lower part of the TSS. The development of a pervasive foliation towards the bottom of the TSS indicates increasing strain, related to top down-to-the-NE tectonic transport. A Low P metamorphic event, marked by the growth of post-D1 biotite porphyroblasts at the base of the TSS, is related to the conductive heating from the underlying HHC.  相似文献   

19.
A combined metamorphic and isotopic study of lit‐par‐lit migmatites exposed in the hanging wall of the Main Central Thrust (MCT) from Sikkim has provided a unique insight into the pressure–temperature–time path of the High Himalayan Crystalline Series of the eastern Himalaya. The petrology and geochemistry of one such migmatite indicates that the leucosome comprises a crystallized peraluminous granite coexisting with sillimanite and alkali feldspar. Large garnet crystals (2–3 mm across) are strongly zoned and grew initially within the kyanite stability field. The melanosome is a biotite–garnet pelitic gneiss, with fibrolitic sillimanite resulting from polymorphic inversion of kyanite. By combining garnet zoning profiles with the NaCaMnKFMASHTO pseudosection appropriate to the bulk composition of a migmatite retrieved from c. 1 km above the thrust zone, it has been established that early garnet formed at pressures of 10–12 kbar, and that subsequent decompression caused the rock to enter the melt field at c. 8 kbar and c. 750 °C, generating peritectic sillimanite and alkali feldspar by the incongruent melting of muscovite. Continuing exhumation resulted in resorption of garnet. Sm–Nd growth ages of garnet cores and rim, indicate pre‐decompression garnet growth at 23 ± 3 Ma and near‐peak temperatures during melting at 16 ± 2 Ma. This provides a decompression rate of 2 ± 1 mm yr?1 that is consistent with exhumation rates inferred from mineral cooling ages from the eastern Himalaya. Simple 1D thermal modelling confirms that exhumation at this rate would result in a near‐isothermal decompression path, a result that is supported by the phase relations in both the melanosome and leucosome components of the migmatite. Results from this study suggest that anatexis of Miocene granite protoliths from the Himalaya was a consequence of rapid decompression, probably in response to movement on the MCT and on the South Tibetan detachment to the north.  相似文献   

20.
The Dadeldhura thrust sheet inm western Nepal consists of Proterozoic–Lower Paleozoic sedimentary and plutonic rocks, and their metamorphic equivalents, that rest structurally on Proterozoic strata of the Lesser Himalayan sequence. Although regional metamorphism and ductile deformation were widespread during Tertiary thrust emplacement, relicts of early Paleozoic tectonism are preserved locally. New field and geochronologic studies, together with the findings of previous workers, indicate that this early Paleozoic tectonism included: (1) regional metamorphism to at least garnet grade, (2) regional folding of a thick metamorphic sequence into a broad east–west trending syncline, (3) outcrop-scale folding of metasedimentary rocks, (4) emplacement of Cambro–Ordovician granitic bodies during and after the metamorphism and deformation, (5) uplift and erosion of the metamorphic sequence, with garnet-grade rocks locally exposed at the surface, and (6) derivation of Ordovician conglomeratic sandstones from the early Paleozoic orogen. Similar records of metamorphism, deformation, and uplift/erosion have been found in other regions of the Himalaya, indicating that rocks of the Dadeldhura thrust sheet were originally involved in a regionally extensive orogenic system. Future tectonic models of Himalayan orogenesis must accommodate this early Paleozoic event.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号