首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 490 毫秒
1.
Garnet-bearing mantle peridotites, occurring as either xenoliths in volcanic rocks or lenses/massifs in high-pressure and ultrahigh-pressure terrenes within orogens, preserve a record of deep lithospheric mantle processes. The garnet peridotite xenoliths record chemical equilibrium conditions of garnet-bearing mineral assemblage at temperatures (T) ranging from ~700 to 1,400°C and pressures (P) > 1.6–8.9 GPa, corresponding to depths of ~52–270 km. A characteristic mineral paragenesis includes Cr-bearing pyropic garnet (64–86 mol% pyrope; 0–10 wt% Cr2O3), Cr-rich diopside (0.5–3.5 wt% Cr2O3), Al-poor orthopyroxene (0–5 wt% Al2O3), high-Cr spinel (Cr/(Cr + Al) × 100 atomic ratio = 2–86) and olivine (88–94 mol% forsterite). In some cases, partial melting, re-equilibration involving garnet-breakdown, deformation, and mantle metasomatism by kimberlitic and/or carbonatitic melt percolations are documented. Isotope model ages of Archean and Proterozoic are ubiquitous, but Phanerozoic model ages are less common. In contrast, the orogenic peridotites were subjected to ultrahigh-pressure (UHP) metamorphism at temperature ranging from ~700 to 950°C and pressure >3.5–5.0 GPa, corresponding to depths of >110–150 km. The petrologic comparisons between 231 garnet peridotite xenoliths and 198 orogenic garnet peridotites revealed that (1) bulk-rock REE (rare earth element) concentrations in xenoliths are relatively high, (2) clinopyroxene and garnet in orogenic garnet peridotites show a highly fractionated REE pattern and Ce-negative anomaly, respectively, (3) Fo contents of olivines for off-cratonic xenolith are in turn lower than those of orogenic garnet and cratonic xenolith but mg-number of garnet for orogenic is less than that of off-cratonic and on-cratonic xenolith, (4) Al2O3, Cr2O3, CaO and Cr# of pyroxenes and chemical compositions of whole rocks are very different between these garnet peridotites, (5) orogenic garnet peridotites are characterized by low T and high P, off-cratonic by high T and low P, and cratonic by medium T and high P and (6) garnet peridotite xenoliths are of Archean or Proterozoic origin, whereas most of orogenic garnet peridotites are of Phanerozoic origin. Taking account of tectonic settings, a new orogenic garnet peridotite exhumation model, crust-mantle material mixing process, is proposed. The composition of lithospheric mantle is additionally constrained by comparisons and compiling of the off-cratonic, on-cratonic and orogenic garnet peridotite.  相似文献   

2.
Using various methods of melt inclusion investigation, including electron and ion microprobe techniques, we estimated the composition, evolution, and formation conditions of melts producing the trachydacites and pantellerites of the Late Paleozoic bimodal volcanic association of Dzarta-Khuduk, Central Mongolia. Primary crystalline and melt inclusions were detected in anorthoclase from trachydacites and quartz from pantellerites and pantelleritic tuffs. Among the crystalline inclusions, we identified hedenbergite, fluorapatite, and pyrrhotite in the trachydacites and F-arfvedsonite, fluorite, ilmenite, and the rare REE diorthosilicate chevkinite in the pantellerites. Melt inclusions in anorthoclase from the trachydacites are composed of glass, a gas phase, and daughter minerals (F-arfvedsonite, fluorite, villiaumite, and anorthoclase rim on the inclusion wall). Melt inclusions in quartz from the pantellerites are composed of glass, a gas phase, and a fine-grained salt aggregate consisting of Li, Na, and Ca fluorides (griceite, villiaumite, and fluorite). Melt inclusions in quartz crystalloclasts from the pantelleritic tuffs are composed of homogeneous silicate glasses. The phenocrysts of the trachydacites and pantellerites crystallized at temperatures of 1060–1000°C. During thermometric experiments with quartz-hosted melt inclusions from the pantellerites, the formation of immiscible silicate and salt (fluoride) melts was observed at a temperature of 800°C. Homogeneous melt inclusions in anorthoclase from the trachydacites have both trachydacite and rhyolite compositions (wt %): 68–70 SiO2, 12–13 Al2O3, 0.34–0.74 TiO2, 5–7 FeO, 0.4–0.9 CaO, and 9–12 Na2O + K2O. The agpaitic index ranges from 0.92 to 1.24. The glasses of homogenized melt inclusions in quartz from the pantellerites and pantelleritic tuffs have rhyolitic compositions. Compared with the homogeneous glasses trapped in anorthoclase of the trachydacites, quartz-hosted inclusions from the pantellerites show higher SiO2 (72–78 wt %) and lower Al2O3 contents (7.8–10.0 wt %). They also contain 0.14–0.26 wt % TiO2, 2.5–4.9 wt % FeO, 9–11 wt % Na2O + K2O, and 0.9–0.15 wt % CaO and show an agpaitic index of 1.2–2.05. Homogeneous melt inclusions in quartz from the pantelleritic tuffs contain 69–72 wt % SiO2. The contents of other major components, including TiO2, Al2O3, FeO, and CaO, are close to those in the homogeneous glasses of quartzhosted melt inclusions in the pantellerites. The contents of Na2O + K2O are 4–10 wt %, and the agpaitic index is 1.0–1.6. The glasses of melt inclusions from each rock group show distinctive volatile compositions. The H2O content is up to 0.08 wt % in anorthoclase of the trachydacites, 0.4–1.4 wt % in quartz of the pantellerites, and up to 5 wt % in quartz of the pantelleritic tuffs. The content of F in the glasses of melt inclusions in the phenocrysts of the trachydacites is no higher than 0.67 wt %, and up to 1.4–2.8 wt % in quartz from the pantellerites. The Cl content is up to 0.2 wt % in the glasses of melt inclusions in the minerals of the trachydacites and up to 0.5 wt % in the glasses of quartz-hosted melt inclusions from the pantellerites. The investigation of trace elements in the homogenized glasses of melt inclusions in minerals showed that the trachydacites and pantellerites were formed from strongly evolved rare-metal alkaline silicate melts with high contents of Li, Zr, Rb, Y, Hf, Th, U, and REE. The analysis of the composition of homogeneous melt inclusions in the minerals of the above rocks allowed us to distinguish magmatic processes resulting in the enrichment of these rocks in trace and rare earth elements. The most important processes are the crystallization differentiation and immiscible separation of silicate and fluoride salt melts. It was also shown that all the melts studied evolved in spatially separated magma chambers. This caused the differences in the character of melt evolution between the trachydacites and pantellerites. During the final stages of differentiation, when the magmatic system was saturated with respect to ore elements, Na-Ca fluoride melts were separated and extracted considerable amounts of Li.  相似文献   

3.
西藏普兰地幔橄榄岩中尖晶石内的钙长石包裹体及其成因   总被引：6，自引：5，他引：1  
郭国林  徐向珍  李金阳 《岩石学报》2011,27(11):3197-3206
西藏普兰超镁铁岩体之东南缘与玄武岩接触界线附近的地幔橄榄岩中除有粒状半自形的钙长石产出外,还在尖晶石中发现有呈蠕虫状、浑圆状的钙长石包裹体存在.研究发现两种产状的钙长石An值都大于95且均无环带构造,说明钙长石从高Ca/Al比值的熔体中结晶时具有结晶时间短、结晶速度快的特点,可能形成于地壳较浅部位.从化学成分来看,包裹体形态的钙长石具有较高的Cr2O3含量,其寄主矿物尖晶石的Cr#值低且TiO2含量比深海橄榄岩中的尖晶石低得多,推断钙长石包裹体与寄主矿物尖晶石是在液相条件下几乎同时结晶的产物.综合研究表明钙长石包裹体的成因可能是玄武岩熔体在地壳较浅部位侵入方辉橄榄岩时,高温的玄武质熔体提供热源,使得方辉橄榄岩中尖晶石内的Cpx+ Opx细粒矿物包裹体在高温环境下发生熔融,发生Opx+ Cpx+ Sp→Ol+ Pl的反应,由于这种情况下尖晶石有剩余,故新生成的橄榄石和钙长石矿物仍然包裹于尖晶石内,从而形成尖晶石内部呈蠕虫状的钙长石包裹体.  相似文献   

4.
Mica kimberlite and alkali picrite were identified in the northwestern Urik-Iya Graben of the eastern Sayan region. Typomorphism of Cr-diopside and high-Cr (up to 55.22 wt % Cr2O3) spinel from kimberlite of the Bushkanai dike indicate that the melt was generated in the mantle, composed of spinel peridotite. The high content of Cr-spinel (45–55 wt % Cr2O3) microlites in the groundmass of kimberlite and small amounts of ulvospinel and titanomagnetite in the absence of perovskite testifies to the diamond potential of this kimberlite. Picroilmenite, manganoilmenite with an anomalously high MnO content (11.37–17.78 wt %), and barium titanate with (wt %) 62.21 TiO2, 0.61 Cr2O3, 15.89 FeO, 4.05 MnO, 1.71 CaO, and 11.13 BaO close in composition to a new mineral species from the Murun pluton were identified in the groundmass for the first time. Kimberlite from the Bushkanai dike belongs to the Zolotitsa low-Ti geochemical type of kimberlites derived from the slightly enriched lithospheric mantle EM1. The distribution of trace elements, including REE, in picrite from the same dike corresponds to the slightly depleted asthenospheric mantle. Different mantle sources of kimberlite and picrite from the same dike indicate that these rocks are related to independent melts rather than to products of fractionation of a common parental alkaline ultramafic magma.  相似文献   

5.
Uralian-Alaskan-type mafic–ultramafic complexes are recognized as a distinct class of intrusions regarding lithologic assemblage, mineral chemistry and petrogenetic setting. In the present study, we discuss new data on the distribution of major elements in minerals of the spinel group in rocks from Uralian-Alaskan-type complexes in the Ural Mountains, Russia. Cr-rich spinel (Cr2O3 = 20–53 wt%) in dunite with interstitial clinopyroxene and in wehrlite cumulates indicate that it reacted with interstitial liquid resulting in the progressive substitution of Al2O2 and Cr2O3 by Fe2O3 and TiO2. A distinct change in the spinel chemistry in dunite (Cr2O3 = 47–53 wt%), towards Al2O3- and Cr2O3-poor but Fe2O3-rich compositions monitors the onset of clinopyroxene fractionation in wehrlite (Cr2O3 = 15–35 wt%, Al2O3 = 1–8 wt%, Fe2O3 = 25–55 wt%). In more fractionated mafic rocks, the calculated initial composition of exsolved spinel traces the sustained crystallization of clinopyroxene by decreasing Cr2O3 and increasing FeO, Fe2O3 and fO2. Finally, the initiation of feldspar crystallization buffers the Al2O3 content in most of the spinels in mafic rocks at very low Cr2O3 contents (<5 wt%). The fractionation path all along and the reaction with interstitial liquid are accompanied by increasing Fe2O3 contents in the spinel. This likely is caused by a significant increase in the oxygen fugacity, which suggests closed system fractionation processes. Spinel with Cr2O3 < 27 wt% is exsolved into a Fe2O3-rich and an Al2O3-rich phase forming a variety of textures. Remarkably, exsolved spinel in different lithologies from complexes 200 km apart follows one distinct solvus line defining a temperature of ca. 600°C. This indicates that the parental magmas were emplaced and eventually cooled at similar levels in the lithosphere, likely near the crust–mantle boundary. Eventually, these 600°C hot bodies were rapidly transported into colder regions of the upper crust during a regional tectonic event, probably during the major active phase of the Main Uralian Fault.  相似文献   

6.
Melt and fluid inclusions were investigated in six quartz phenocryst samples from the igneous rocks of the extrusive (ignimbrites and rhyolites) and subvolcanic (granite porphyries) facies of the Lashkerek Depression in the Kurama mining district, Middle Tien Shan. The method of inclusion homogenization was used, and glasses from more than 40 inclusions were analyzed on electron and ion microprobes. The chemical characteristics of these inclusions are typical of silicic magmatic melts. The average composition is the following (wt %): 72.4 SiO2, 0.06 TiO2, 13.3 Al2O3, 0.95 FeO, 0.03 MnO, 0.01 MgO, 0.46 CaO, 3.33 Na2O, 5.16K2O, 0.32 F, and 0.21 Cl. Potassium strongly prevails over sodium in all of the inclusions (K2O/Na2O averages 1.60). The average total of components in melt inclusions from five samples is 95.3 wt %, which indicates a possible average water content in the melt of no less than 3–4 wt %. Water contents of 2.0 wt % and 6.6 wt % were determined in melt inclusions from two samples using an ion microprobe. The analyses of ore elements in the melt inclusions revealed high contents of Sn (up to 970 ppm), Th (19–62 ppm, 47 ppm on average), and U (9–26 ppm, 18 ppm on average), but very low Eu contents (0.01 ppm). Melt inclusions of two different compositions were detected in quartz from a granite porphyry sample: silicate and chloride, the latter being more abundant. In addition to Na and K chlorides, the salt inclusions usually contain one or several anisotropic crystals and an opaque phase. The homogenization temperatures of the salt inclusions are rather high, from 680 to 820°C. In addition to silicate inclusions with homogenization temperatures of 820–850°C, a primary fluid inclusion of aqueous solution with a concentration of 3.7 wt % NaCl eq. and a very high density of 0.93 g/cm3 was found in quartz from the ignimbrite. High fluid pressure values of 6.5–8.3 kbar were calculated for the temperature of quartz formation. These estimates are comparable with values obtained by us previously for other regions of the world: 2.6–4.3 kbar for Italy, 3.7 kbar for Mongolia, 3.3–8.7 kbar for central Slovakia, and 3.3–9.6 kbar for eastern Slovakia. Unusual melt inclusions were investigated in quartz from another ignimbrite sample. In addition to a gas phase and transparent glass, they contain spherical Feoxide globules (81.2 wt % FeO) with high content of SiO2 (9.9 wt %). The globules were dissolved in the silicate melt within a narrow temperature range of 1050–1100°C, and the complete homogenization of the inclusions was observed at temperatures of 1140°C or higher. The combined analysis of the results of the investigation of these inclusions allowed us to conclude that immiscible liquids were formed in the high-temperature silicic magma with the separation of iron oxide-dominated droplets.  相似文献   

7.
Neyriz ophiolite in Abadeh Tashk area appears as four major separated massifs in an area with 125 km2, south of Iran. Peridotites including harzburgite, dunite, and lesser low-Cpx lherzolite are the major constituents of the ophiolite with very minor mafic rocks. Usual gabbros of ophiolite complexes are virtually absent from the study area. Mineral modality associated with bulk rock and mineral chemistry of the peridotites show a progression from fertile to ultra-refractory character, reflected by a progressive decrease in modal pyroxenes and in Al2O3, CaO, SiO2, Sc, Ta, V, and Ga values of the studied rocks by approaching chromite deposits. The Neyriz peridotites vary from low-Cpx lherzolite (MgO, 41.97–43.1 wt.%; Al2O3, 0.8–1.3 wt.%) with low content of Cr# spinel (36.7–37.6) and Fo olivine (90.79–91.5) to harzburgite (MgO, 44.31–45.25 wt.%;Al2O3, 0.29–0.45 wt.%; Cr# spinel, 58.2–73.45; Fo olivine, 91.23–91.56), and then to dunite (MgO, 45.9–49.2 wt.%; Al2O3, 0.18–0.48 wt.%) with higher content of Cr# spinel (74.34–79.36) and Fo olivine (91.75–94.68). Compared to modern oceanic settings, mineral and rock composition of low-Cpx lherzolite plot within the field of mid-ocean-ridge environment, whereas those of harzburgite and dunite fall in the field of fore-arc peridotites. As a result of the studies on minerals and whole rock chemistry along with rock interrelationships, we contend that the peridotites were subsequently affected by percolating hydrous boninitic melt from which the high-Cr–Mg, low-Ti chromitites were formed within mantle wedge above the supra-subduction zone in a fore-arc setting.  相似文献   

8.
Major-element compositions of minerals in peridotite xenoliths from the Lac de Gras kimberlites provide constraints on the mode of lithosphere formation beneath the central Slave Craton, Canada. Magnesia contents of reconstructed whole rocks correlate positively with NiO and negatively with CaO contents, consistent with variable partial melt extraction. Alumina and Cr2O3 contents are broadly positively correlated, suggestive of melt depletion in the absence of a Cr–Al phase. Garnet modes are high at a given Al2O3 content (a proxy for melt depletion), falling about a 7 GPa melt depletion model. These observations, combined with high olivine Mg# and major-element relationships of FeO-poor peridotites (<7.5 wt%) indicative of melt loss at pressures >3 GPa (residual FeO content being a sensitive indicator of melt extraction pressure), and similar high pressures of last equilibration (∼4.2 to 5.8 GPa), provide multiple lines of evidence that the mantle beneath the central Slave Craton has originated as a residue from high-pressure melting, possibly during plume subcretion. Apparent low melt depletion pressures for high-FeO peridotites (>7.5 wt%) could suggest formation in an oceanic setting, followed by subduction to their depth of entrainment. However, these rocks, which are characterised by low SiO2 contents (<43 wt%), are more likely to be the result of post-melting FeO-addition, leading to spuriously low estimates of melt extraction pressures. They may have reacted with a silica-undersaturated melt that dissolved orthopyroxene, or experienced olivine injection by crystallising melts. A secular FeO-enrichment of parts of the deep mantle lithosphere is supported by lower average Mg# in xenolithic olivine (91.7) compared to olivine inclusions in diamond (92.6).  相似文献   

9.
 K-richterite/phlogopite-bearing peridotite xenoliths and MARID inclusions have been found in Late Cretaceous (67±0.2 million years) monchiquites and an olivine nephelinite from North Eastern Morocco. It is the first evidence of MARID rocks and K-richterite/phlogopite-bearing peridotites outside the kimberlitic context. In the hydrous xenoliths, textural features suggest that K-richterite, phlogopite and Al-poor diopside are replacement minerals. K-richterites contain 2–5 wt% FeO, 0.1–1.5 wt% TiO2 and <0.5 wt% Cr2O3. Micas contain 5.4–7.4 wt% FeO and 0.3–2.2 wt% TiO2, with Cr and Ni contents <0.2 wt%. Diopsides are Al-poor (<0.2 wt% Al2O3) and contain 0.1–0.2 wt% TiO2, 0.9–1.1 wt% Na2O and 1.3–1.7 wt% Cr2O3. Compared to known K-richterites and micas from metasomatised peridotite nodules (PKP types), the Moroccan minerals are more Fe rich, K-richterites have higher Ti and micas less Cr and Ni. They are thus closer to MARID than to PKP minerals. K-richterites and mica from the MARID inclusions show typical characteristics, e.g. high FeO (4.3–4.7 wt% in richterite and 7.2 wt% in mica), low NiO and/or Cr2O3 and the incomplete filling of the tetrahedral site by Si+Al. Ion probe D/H analyses of amphiboles and micas from both xenolith types give high δD values ranging from –8 to –73, with large variations within single grains (up to 50‰). Both the D-enrichment and the δD variations are inherited from the mantle. The similar chemical composition and δD values of K-richterite/phlogopite from the hydrous peridotites and MARID minerals suggest a genetic link between the two types of xenoliths. The conditions required for producing MARIDs and K-richterite/phlogopite-bearing peridotites may thus exist in contexts other than stable cratonic settings. MARID rocks and the associated metasomites may result from a hydrous fluid interaction with a peridotite, the metasomatic agent being characterised by a high K and low Al signature and a high δD value. A D-rich source is involved in the metasomatic event producing the hydrous minerals, and the scatter observed in the δD values suggests a mixing between this source and another one with typical upper mantle D/H composition. As indicated by the low δD (–74) values of micas from the host lava, metasomatism predated and is unrelated to the alkaline volcanism. Received: 9 March 1995 / Accepted: 4 April 1996  相似文献   

10.
The data obtained on melt and fluid inclusions in minerals of granites, metasomatic rocks, and veins with tin ore mineralization at the Industrial’noe deposit in the southern part of the Omsukchan trough, northeastern Russia, indicate that the melt from which the quartz of the granites crystallized contained globules of salt melts. Silicate melt inclusions were used to determine the principal parameters of the magmatic melts that formed the granites, which had temperatures at 760–1020°C, were under pressures of 0.3–3.6 kbar, and had densities of 2.11–2.60 g/cm3 and water concentrations of 1.7–7.0 wt %. The results obtained on the fluid inclusions testify that the parameters of the mineral-forming fluids broadly varied and corresponded to temperatures at 920–275°C, pressures 0.1–3.1 kbar, densities of 0.70–1.90 g/cm3, and salinities of 4.0–75.0 wt % equiv. NaCl. Electron microprobe analyses of the glasses of twelve homogenized inclusions show concentrations of major components typical of an acid magmatic melt (wt %, average): 73.2% SiO2, 15.3% Al2O3, 1.3% FeO, 0.6% CaO, 3.1% Na2O, and 4.5% K2O at elevated concentrations of Cl (up to 0.51 wt %, average 0.31 wt %). The concentrations and distribution of some elements (Cl, K, Ca, Mn, Fe, Cu, Zn, Pb, As, Br, Rb, Sr, and Sn) in polyphase salt globules in quartz from both the granites and a mineralized miarolitic cavity in granite were assayed by micro-PIXE (proton-induced X-ray emission). Analyses of eight salt globules in quartz from the granites point to high concentrations (average, wt %) of Cl (27.5), Fe (9.7), Cu (7.2), Mn (1.1), Zn (0.66), Pb (0.37) and (average, ppm) As (2020), Rb (1850), Sr (1090), and Br (990). The salt globules in the miarolitic quartz are rich in (average of 29 globules, wt %) Cl (25.0), Fe (5.4), Mn (1.0), Zn (0.50), Pb (0.24) and (ppm) Rb (810), Sn (540), and Br (470). The synthesis of all data obtained on melt and fluid inclusions in minerals from the Industrial’noe deposit suggest that the genesis of the tin ore mineralization was related to the crystallization of acid magmatic melts. Original Russian Text@ V.B. Naumov, V.S. Kamenetsky, 2006, published in Geokhimiya, 2006, No. 12, pp. 1279–1289.  相似文献   

11.
The paper presents data on naturally quenched melt inclusions in olivine (Fo 69–84) from Late Pleistocene pyroclastic rocks of Zhupanovsky volcano in the frontal zone of the Eastern Volcanic Belt of Kamchatka. The composition of the melt inclusions provides insight into the latest crystallization stages (∼70% crystallization) of the parental melt (∼46.4 wt % SiO2, ∼2.5 wt % H2O, ∼0.3 wt % S), which proceeded at decompression and started at a depth of approximately 10 km from the surface. The crystallization temperature was estimated at 1100 ± 20°C at an oxygen fugacity of ΔFMQ = 0.9–1.7. The melts evolved due to the simultaneous crystallization of olivine, plagioclase, pyroxene, chromite, and magnetite (Ol: Pl: Cpx: (Crt-Mt) ∼ 13: 54: 24: 4) along the tholeiite evolutionary trend and became progressively enriched in FeO, SiO2, Na2O, and K2O and depleted in MgO, CaO, and Al2O3. Melt crystallization was associated with the segregation of fluid rich in S-bearing compounds and, to a lesser extent, in H2O and Cl. The primary melt of Zhupanovsky volcano (whose composition was estimated from data on the most primitive melt inclusions) had a composition of low-Si (∼45 wt % SiO2) picrobasalt (∼14 wt % MgO), as is typical of parental melts in Kamchatka and other island arcs, and was different from MORB. This primary melt could be derived by ∼8% melting of mantle peridotite of composition close to the MORB source, under pressures of 1.5 ± 0.2 GPa and temperatures 20–30°C lower than the solidus temperature of “dry” peridotite (1230–1240°C). Melting was induced by the interaction of the hot peridotite with a hydrous component that was brought to the mantle from the subducted slab and was also responsible for the enrichment of the Zhupanovsky magmas in LREE, LILE, B, Cl, Th, U, and Pb. The hydrous component in the magma source of Zhupanovsky volcano was produced by the partial slab melting under water-saturated conditions at temperatures of 760–810°C and pressures of ∼3.5 GPa. As the depth of the subducted slab beneath Kamchatkan volcanoes varies from 100 to 125 km, the composition of the hydrous component drastically changes from relatively low-temperature H2O-rich fluid to higher temperature H2O-bearing melt. The geothermal gradient at the surface of the slab within the depth range of 100–125 km beneath Kamchatka was estimated at 4°C/km.  相似文献   

12.
In peridotites, olivine, clinopyroxene, and orthopyroxene are complex solid solutions with wide stability fields. Depending mostly on bulk composition and pressure, these minerals may be accompanied by plagioclase (low pressure), spinel (moderate pressure), or garnet (high pressure), resulting in 4-phase and rarer 5-phase assemblages. Although a particular mineral assemblage is stable over a range of P–T, the compositions of the individual minerals vary with changing P–T conditions. Application of standard geothermobarometers to olivine–clinopyroxene–orthopyroxene–spinel peridotites is problematic. An alternative approach is to use a bulk rock composition to calculate equilibrium phase diagrams to determine the conditions under which a particular assemblage is stable. This requires consideration of the 7-component system SiO2–Al2O3–Cr2O3–FeO–MgO–CaO–Na2O, internally consistent thermodynamic data for end members, and reliable mixing models for all mineral solutions. Experimental studies in simpler systems, and solution models from the literature, permit derivation of multicomponent thermodynamic mixing models for the key minerals. The models, when applied to xenoliths from Kilbourne Hole, constrain P and T of equilibration and are less sensitive to mineral compositional variations, or uncertainty in activity models, than standard thermobarometry. Our modeling provides the first tightly constrained pressure estimates for Kilbourne Hole, placing the xenoliths in the spinel stability field at depths (30–45 km) that correspond to the uppermost mantle beneath the Rio Grande Rift. The fine-grained equigranular lherzolite, porphyroclastic lherzolite, and some harzburgite-dunite specimens equilibrated at average conditions of 11.5 Kbar-930°C, 12 Kbar-990°C, and 13 Kbar-1,080°C, respectively. The mantle beneath the Rio Grande Rift is layered; the fine-grained equigranular lherzolite derives from relatively shallow depth (35 km average), and the porphyroclastic lherzolite from slightly deeper levels. Lying 5–10 km beneath both lherzolites, the harzburgite-dunite represents a depth where melt extraction has significantly altered mantle chemistry and where local thermodynamic equilibrium has not been maintained.  相似文献   

13.
Chromium as Cr3+ substitutes for octahedrally coordinated Alin upper-mantle minerals, thereby reducing the activity of Al2O3in the system and hence the concentration of Al2O3 in partialmelts. The effect of Cr2O3 on melt compositions multiply saturatedwith the spinel lherzolite phase assemblage has been quantifiedin the system CaO–MgO–Al2O3–SiO2–Cr2O3at 1·1 GPa as a function of 100 Cr/(Cr + Al) in the spinel(Cr#sp). The decrease of Al2O3 in the melt with increasing Cr#spis accompanied by increasing MgO and SiO2, whereas CaO remainsalmost constant. Consequently, the CaO/Al2O3 ratio of the meltincreases with Cr#sp, and the melt becomes richer in normativediopside, hypersthene and quartz. The effect may explain certainmantle melts with unusually high CaO/Al2O3 ratios. The concentrationof Cr2O3 in the melt remains low even at high Cr#sp, which meansthat the strong effect of Cr2O3 on partial melting equilibriais not readily apparent from its concentration in the melt itself.The existence of a highly refractory major component such asCr2O3 nullifies simplified conclusions from the ‘inverseapproach’ in the experimental study of basalt petrogenesis,as there is insufficient information in the composition of thepartial melt to reconstruct the conditions of melting. KEY WORDS: basalt petrogenesis; partial melting; reversal experiment; spinel lherzolite; system CMAS–Cr2O3; CaO/Al2O3 of melt; effect of Cr2O3  相似文献   

14.
Mineral and melt inclusions in olivines from the most Mg-richmagma from the southern West Sulawesi Volcanic Province indicatethat two distinct melts contributed to its petrogenesis. Thecontribution that dominates the whole-rock composition comesfrom a liquid with high CaO (up to 16 wt %) and low Al2O3 contents(CaO/Al2O3 up to 1), in equilibrium with spinel, olivine (Fo85–91;CaO 0·35–0·5 wt %; NiO 0·2–0·30wt %) and clinopyroxene. The other component is richer in SiO2(>50 wt %) and Al2O3 (19–21 wt %), but contains significantlyless CaO (<4 wt %); it is in equilibrium with Cr-rich spinelwith a low TiO2 content, olivine with low CaO and high NiO content(Fo90–94; CaO 0·05–0·20 wt %; NiO0·35–0·5 wt %), and orthopyroxene. Boththe high- and low-CaO melts are potassium-rich (>3 wt % K2O).The high-CaO melt has a normalized trace element pattern thatis typical for subduction-related volcanic rocks, with negativeTa–Nb and Ti anomalies, positive K, Pb and Sr anomalies,and a relatively flat heavy rare earth element (HREE) pattern.The low-CaO melt shows Y and HREE depletion (Gdn/Ybn 41), butits trace element pattern resembles that of the whole-rock andhigh-CaO melt in other respects, suggesting only small distinctionsin source areas between the two components. We propose thatthe depth of melting and the dominance of H2O- or CO2-bearingfluids were the main controls on generating these contrastingmagmas in a syn-collisional environment. The composition ofthe low-CaO magma does not have any obvious rock equivalent,and it is possible that this type of magma does not easily reachthe Earth's surface without the assistance of a water-poor carriermagma. KEY WORDS: melt inclusions; mineral chemistry; olivine; syn-collisional magmatism; ankaramites; low-Ca magma  相似文献   

15.
Detrital spinel is a widespread heavy mineral in sandstones from the Maastrichtian–Middle Eocene sedimentary basins in the SE Alps. Chemistry of detrital spinels from the Claut/Clauzetto and Julian Basins (N Italy and NW Slovenia) is used to constrain petrological and geochemical affinities and tectonic provenance of the source rocks. In addition, we have analysed melt inclusion compositions in the detrital volcanic spinels to better constrain the nature of their parental magmas. This is the first study of melt inclusions in detrital spinels. Two principal compositional groups of detrital spinels are recognised based on their TiO2 and Fe2+/Fe3+; one derived from peridotites, the other from basaltic volcanics. Peridotitic spinels are more abundant and have TiO2 < 0.2 wt% and high Cr/Cr + Al (40–90), characteristic of suprasubduction zone harzburgites. Significant chemical variations among volcanic spinels (TiO2 up to 3 wt%, Al2O3 12–44 wt%) suggest multiple sources, with geochemically distinct characteristics, including MORB-type and backarc basin basalts, subduction-related magmas and tholeiites produced during early continental rifting. Compositions of homogenised melt inclusions in spinels with TiO2 > 0.2 better distinguish the differences between the compositions of their host spinels and help to further clarify the geodynamic provenance of extrusive source rocks. Several compositional groups of melt inclusions have been recognised and represent diverse magmatism of marginal basins, including MORB- and subduction-related geochemical types, as well as magmas characteristic of early continental rifting. These results, combined with the data on regional ophiolitic complexes and tectonic reconstructions favour the Internal Dinarides of Yugoslavia as a possible source area for the SE Alps sediments. Received: 20 January 2000 / Accepted: 25 April 2000  相似文献   

16.
The best known cause for colors in insulating minerals is due to transition metal ions as impurities. As an example, Cr3+ is responsible for the red color of ruby (α-Al2O3:Cr3+) and the green color of eskolaite (α-Cr2O3). Using X-ray absorption measurements, we connect the colors of the Cr x Al2−x O3 series with the structural and electronic local environment around Cr. UV–VIS electronic parameters, such as the crystal field and the Racah parameter B, are related to those deduced from the analysis of the isotropic and XMCD spectra at the Cr L2,3-edges in Cr0.07Al1.93O3 and eskolaite. The Cr–O bond lengths are extracted by EXAFS at the Cr K-edge in the whole Cr x Al2−x O3 (0.07≤x< 2) solid solution series. The variation of the mean Cr–O distance between Cr0.07Al1.93O3 and α-Cr2O3 is evaluated to be 0.015 Å (≈1%). The variation of the crystal field in the Cr x Al2−x O3 series is discussed in relation with the variation of the averaged Cr–O distances.  相似文献   

17.
We present the whole rock and the mineral chemical data for upper mantle peridotites from the San-Jiang region in Yunnan, SW China. These peridotites are a part of a Paleo-Tethyan ophiolite belt occurring along the Jinshajiang and Lancangjiang suture zones. All samples of the Jinshajiang and Lancangjiang ultramafic rocks are completely serpentinized. The Jinshajiang serpentinites are characterized by no relict of olivine and pyroxene, and the Cr# content of spinels is 0.32–0.49. The Lancangjiang serpentinites were collected from two different locations; the northern location which has some relict of Opx(Al2O3 is 0.13–2.2 wt%, TiO 2 is 0.004–0.057 wt% and Mg# content is 0.895–0.933) and the Cr# content of spinel is 0.26-0.55; the southern location, which has some relict of Olivine(Fo = 90–92.5 and NiO = 0.12–0.26 wt%), and spinel Cr# ranging from 0.41 to 0.57. The whole rock geochemical and the mineral chemistry data imply that the Jinshajiang and Lancangjiang serpentinites represent abyssal peridotites residues after ~15–20% partial melting for the Jinshajiang and Lancangjiang serpentinites(south location), and ~11–19% partial melting for the Lancangjiang serpentinites(north location). In addition, the compositional trends of the spinel analyses of the Lancangjiang serpentinites imply that the MORB melt-peridotite interaction process played a significant role during their evolution. These processes are evidenced by an increase in Cr# with an increase in TiO 2, whereas the spinel analyses of the Jinshajiang serpentinites display an increase in Cr# with a decrease in Ti O2, indicating that the Jinshajiang serpentinites were subjected to a simple partial melting process.  相似文献   

18.
The ophiolitic peridotites in the Wadi Arais area, south Eastern Desert of Egypt, represent a part of Neoproterozoic ophiolites of the Arabian-Nubian Shield (ANS). We found relics of fresh dunites enveloped by serpentinites that show abundances of bastite after orthopyroxene, reflecting harzburgite protoliths. The bulk-rock chemistry confirmed the harzburgites as the main protoliths. The primary mantle minerals such as orthopyroxene, olivine and chromian spinel in Arais serpentinites are still preserved. The orthopyroxene has high Mg# [=Mg/(Mg + Fe2+)], ~0.923 on average. It shows intra-grain chemical homogeneity and contains, on average, 2.28 wt.% A12O3, 0.88 wt.% Cr2O3 and 0.53 wt.% CaO, similar to primary orthopyroxenes in modern forearc peridotites. The olivine in harzburgites has lower Fo (93?94.5) than that in dunites (Fo94.3?Fo95.9). The Arais olivine is similar in NiO (0.47 wt.% on average) and MnO (0.08 wt.% on average) contents to the mantle olivine in primary peridotites. This olivine is high in Fo content, similar to Mg-rich olivines in ANS ophiolitic harzburgites, because of its residual origin. The chromian spinel, found in harzburgites, shows wide ranges of Cr#s [=Cr/(Cr + Al)], 0.46?0.81 and Mg#s, 0.34?0.67. The chromian spinel in dunites shows an intra-grain chemical homogeneity with high Cr#s (0.82?0.86). The chromian spinels in Arais peridotites are low in TiO2, 0.05 wt.% and YFe [= Fe3+/(Cr + Al + Fe3+)], ~0.06 on average. They are similar in chemistry to spinels in forearc peridotites. Their compositions associated with olivine’s Fo suggest that the harzburgites are refractory residues after high-degree partial melting (mainly ~25?30 % partial melting) and dunites are more depleted, similar to highly refractory peridotites recovered from forearcs. This is in accordance with the partial melting (>20 % melt) obtained by the whole-rock Al2O3 composition. The Arais peridotites have been possibly formed in a sub-arc setting (mantle wedge), where high degrees of partial melting were available during subduction and closing of the Mozambique Ocean, and emplaced in a forearc basin. Their equilibrium temperature based on olivine?spinel thermometry ranges from 650 to 780 °C, and their oxygen fugacity is high (Δlog ?O2?=?2.3 to 2.8), which is characteristic of mantle-wedge peridotites. The Arais peridotites are affected by secondary processes forming microinclusions inside the dunitic olivine, abundances of carbonates and talc flakes in serpentinites. These microinclusions have been formed by reaction between trapped fluids and host olivine in a closed system. Lizardite and chrysotile, based on Raman analyses, are the main serpentine minerals with lesser antigorite, indicating that serpentines were possibly formed under retrograde metamorphism during exhumation and near the surface at low T (<400 °C).  相似文献   

19.
The ultramafic member of the Variscan Ślęża Ophiolite (SW Poland) consists of heavily serpentinised, refractory harzburgites. Those located down to 1.5 km below paleo-Moho contain scarce grains or aggregates of olivine, clinopyroxene and spinel. Non-serpentine phases occur in various assemblages: M1—olivine (Fo 90.2–91.0%, NiO 0.38–0.47 wt.%) and rounded or amaeboidal aluminous chromite, rimmed by Al poor chromite and magnetite; M2—olivine (Fo 90.5–91.5, NiO 0.32–0.44 wt.%), olivine with magnetite inclusions (Fo 87.1–92.5, NiO 0.01–0.68 wt.%), rounded, cleavaged clinopyroxene I (Mg# 91.1–93.2, Al2O3 3.00–4.00 wt.%, Cr2O3 1.00–1.40 wt.%) and elongated clinopyroxene II and clinopyroxene from symplectites with magnetite (Mg# = 92.2–94.1, Al2O3 2.20–3.20 wt.% and Cr2O3 0.80–1.20 wt.%). Clinopyroxene is depleted in REEs relative to chondrite. The M3 assemblage consists of intergrown olivine (Fo 90.8–92.7, NiO 0.20–0.38 wt.%) and clinopyroxene (Mg# = 96.0–98.1, Al2O3 0.00–1.00 wt.% and Cr2O3 0.20–0.60 wt.%).The M1 assemblage contains chromite which records greenschist-facies metamorphism. Textural relationships and chemical composition of clinopyroxene occurring in the M2 assemblage are similar to those formed in oceanic spreading centres by LREE depleted basaltic melt percolation. Olivine occurring in M1 assemblage and part of that from M2 have composition typical of residual olivine from the abyssal harzburgites and of olivine formed in those rocks by melt percolation. The olivine with magnetite inclusions (M2 assemblage) and that from M3 record later deserpentinization event, which supposedly produced also M3 clinopyroxene. The non-serpentine phases from the Ślęża ophiolite mantle member, albeit very poorly preserved, document depleted basaltic melt percolation in the Variscan oceanic spreading centre.  相似文献   

20.
The Happo-O’ne peridotite complex is situated in the northeastern part of the Hida Marginal Tectonic Zone, central Japan, characterized by the high-P/T Renge metamorphism, and is considered as a serpentinite mélange of Paleozoic age. Peridotitic rocks, being massive or foliated, have been subjected to hydration and metamorphism. Their protoliths are mostly lherzolites to harzburgites with subordinate dunites. We found a characteristic mineral assemblage, olivine + orthopyroxene + tremolite + chlorite + chromian spinel, being stable at low-T, from 650 to 750°C, and high-P, from 16 to 20 kbar, tremolite–chlorite peridotites of the tremolite zone. Olivines are Fo88–Fo91, and orthopyroxenes (Mg# = 0.91) show low and homogenous distributions of Al2O3 (up to 0.25 wt%), Cr2O3 (up to 0.25 wt%), CaO (up to 0.36 wt%) and TiO2 (up to 0.06 wt%) due to the low equilibration temperature. Chromian spinels, which are euhedral and enclosed mainly in the orthopyroxenes, have high TiO2, 3.1 wt% (up to 5.7 wt%) on average, and high Cr# [=Cr/(Cr + Al) atomic ratio], 0.95 on average but low Fe3+ [=Fe3+/(Cr + Al + Fe3+) atomic ratio, <0.3]. The bulk-rock chemistry shows that the Happo-O’ne metaperidotites with this peculiar spinel are low in TiO2 (0.01–0.02 wt%), indicating no addition of TiO2 from the outside source during the metamorphism; the high TiO2 of the peculiar spinel has been accomplished by Ti release from Ti-bearing high-T pyroxenes during the formation of low-T, low-Ti silicates (<0.1 wt% TiO2) during cooling. Some dunites are intact from hydration: their olivine is Fo92 and spinel shows high Cr#, 0.72. The Happo-O’ne metaperidotites (tremolite–chlorite peridotites), being in the corner of the mantle wedge, are representative of a hydrous low-T, high-P mantle peridotite facies transitional from a higher T anhydrous peridotite facies (spinel peridotites) formed by in situ retrograde metamorphism influenced by fluids from the subducting slab. They have suffered from low-T (<600°C) retrogressive metamorphism to form antigorite and diopside during exhumation of the Renge metamorphic belt.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号