首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
During the late Tortonian (upper Miocene), the Guadix Basin in S Spain formed one of the Betic corridors that connected the Mediterranean Sea with the Atlantic Ocean. The closure of this connection occurred in a series of steps, documented by three sedimentary units. A lower unit, consisting of basinal marls, shallow-water calcarenites and sands records the formation of a wide seaway. During deposition of the following unit this narrowed to a strait no more than 2 km in wide, triggering an intensification of currents that caused migration of submarine dunes preserved as giant cross-beds in bioclastic sands and conglomerates. Current flowed from the Mediterranean to the Atlantic. The third unit constitutes the youngest marine episode of the filling of the Guadix Basin. At this stage, the connection between the Mediterranean Sea and the Atlantic Ocean was broken, and a system of coastal coral reefs was established in the northern part of the Basin.  相似文献   

2.
During the Late Tortonian, shallow‐water temperate carbonates were deposited in a small bay on a gentle ramp linked to a small island (Alhama de Granada area, Granada Basin, southern Spain). A submarine canyon (the ‘Alhama Submarine Canyon’) developed close to the shoreline, cross‐cutting the temperate‐carbonate ramp. The Alhama Submarine Canyon had an irregular profile and steep slopes (10° to 30°). It was excavated in two phases reflected by two major erosion surfaces, the lowermost of which was incised at least 50 m into the ramp. Wedge‐shaped and trough‐shaped, concave‐up beds of calcareous (terrigenous) deposits overlie these erosional surfaces and filled the canyon. A combination of processes connected to sea‐level changes is proposed to explain the evolution of the Alhama Submarine Canyon. During sea‐level fall, part of the carbonate ramp became exposed and a river valley was excavated. As sea‐level rose, river flows continued along the submerged, former river‐channel, eroding and deepening the valley and creating a submarine canyon. At this stage, only some of the transported conglomerates were deposited locally. As sea‐level continued to rise, the river mouth became detached from the canyon head; littoral sediments, transported by longshore and storm currents, were now captured inside the canyon, generating erosive flows that contributed to its excavation. Most of the canyon infilling took place later, during sea‐level highstand. Longshore‐transported well‐sorted calcarenites/fine‐grained calcirudites derived from longshore‐drift sandwaves poured into and fed the canyon from the south. Coarse‐grained, bioclastic calcirudites derived from a poorly sorted, bioclastic ‘factory facies’ cascaded into the canyon from the north during storms.  相似文献   

3.
Heterozoan temperate‐water carbonates mixed with varying amounts of terrigenous grains and muddy matrix (Azagador limestone) accumulated on and at the toe of an inherited escarpment during the late Tortonian–early Messinian (late Miocene) at the western margin of the Almería–Níjar Basin in south‐east Spain. The escarpment was the eastern end of an uplifting antiform created by compressive folding of Triassic rocks of the Betic basement. Channelized coralline‐algal/bryozoan rudstone to coarse‐grained packstone, together with matrix‐supported conglomerate, are the dominant lithofacies in the higher outcrops, comprising the deposits on the slope. These sediments mainly fill small canyon‐shaped, half‐graben depressions formed by normal faults active before, during and after carbonate sedimentation. Roughly bedded and roughly laminated coralline‐algal/bryozoan rudstone to coarse‐grained packstone are the main lithofacies forming an apron of four small (kilometre‐scale) lobes at the toe of the south‐eastern side of the escarpment (Almería area). Channelized and roughly bedded coralline‐algal/bryozoan rudstone to coarse‐grained packstone, conglomerates, packstone and sandy silt accumulated in a small channel‐lobe system at the toe of the north‐eastern side of the escarpment (Las Balsas area). Carbonate particles and terrigenous grains were sourced from shallow‐water settings and displaced downslope by sediment density flows that preferentially followed the canyon‐shaped depressions. Roughly laminated rudstone to packstone formed by grain flows on the initially very steep slope, whereas the rest of the carbonate lithofacies were deposited by high‐density turbidite currents. The steep escarpment and related break‐in‐slope at the toe favoured hydraulic jumps and the subsequent deposition of coarse‐grained, low‐transport efficiency skeletal‐dominated sediment in the apron lobes. Accelerated uplift of the basement caused a relative sea‐level fall resulting in the formation of outer‐ramp carbonates on the apron lobes, which were in turn overlain by lower Messinian coral reefs. The Almería example is the first known ‘base of slope’ apron within temperate‐water carbonate systems.  相似文献   

4.
During the early Pliocene, subaqueous delta‐scale clinoforms developed in the Águilas Basin, in a mixed temperate carbonate–siliciclastic system. The facies distribution is consistent with the infralittoral prograding wedge model. Stacking patterns and bounding surfaces indicate that the clinoforms formed during the highstand and falling sea‐level stages of a high rank cycle. Twenty‐two prograding clinothems were recognized over a distance of ≥1 km. Biostratigraphic data indicate a time span shorter than 700 kyr for the whole unit (MPl3 biozone of the Mediterranean Pliocene). Cyclic skeletal concentrations and occasional biostromes of suspension feeders (terebratulid brachiopods, modiolid bivalves and adeoniform bryozoan colonies), slightly evolved glauconite and occasional Glossifungites ichnofacies formed on the clinoforms during high‐frequency pulses of relative sea‐level rise. During such stages, increased accommodation space in the topsets of the clinoforms caused a strong reduction of terrigenous input into the foresets and bottomsets. This provided favourable conditions for the development of these suspension feeder palaeocommunities. During stillstand stages, however, reduced accommodation space in the topsets eventually resumed progradation in the foresets. There, the abundance of Ditrupa tubes indicates frequent siltation events that extirpated the terebratulid populations and other epifaunal suspension feeders in the foreset and bottomset subenvironments. The occurrence of shell beds on the clinoforms suggests that this case study represents lower progradation rates than standard examples where shell beds bound the clinobedded units at their base and top only. Importantly, the distributions of biofacies and ichnoassemblage associations contribute significantly to the understanding of the effects of relative sea‐level fluctuations on the evolution of subaqueous delta‐scale clinoform systems.  相似文献   

5.
Cool‐water carbonate sedimentation has dominated Mediterranean shelves since the Early Pliocene. Skeletal sand and gravel herein consist of remains of heterozoan organisms, which are susceptible to reworking due to weak early cementation in non‐tropical waters. This study documents the Lower Pleistocene carbonate wedge of Favignana Island (Italy), which prograded from a 5   km wide passage between two palaeo‐islands into a perpendicular, 10 to 15   km wide strait between the palaeo‐islands at one side and Sicily at the other during the Emilian highstand (1·6   Ma to 1·1   Ma). The clinoformed carbonate wedge, which is 50   m thick and 6   km long, formed by east/south‐east progradation of a platform on the submarine sill by currents that were funnelled between the two palaeo‐islands. Platform‐slope clinoforms evolved from initial aggradation (thin and low‐angle) into a progradation phase (thick and high‐angle). Both clinoform types are characterized by a bimodal facies stacking pattern defined by sedimentary structures created by: (i) subaqueous dunes associated with dilute subcritical currents; and (ii) upper‐flow‐regime bedforms associated with sediment‐laden supercritical turbidity currents. Focusing of episodic currents on the platform by funnelling between the islands controlled the downstream formation of a sediment body, here named carbonate delta. The carbonate delta interfingers with subaqueous dune deposits formed in the perpendicular strait. This study uses a reconstruction of bedform dynamics to unravel the evolution of this gateway‐related carbonate accumulation.  相似文献   

6.
ADAM VECSEI 《Sedimentology》1998,45(3):473-487
A thick bioclastic sediment wedge was deposited on the slope of the Maiella carbonate platform margin in the Late Campanian to Late Maastrichtian. The wedge consists of lobate depositional units (laterally and vertically convex structures). The complex internal geometries of the lobes combine characteristics of unidirectional sandwaves and the alternating point-sources of deltas. Excellent outcrop permits a detailed documentation and discussion of the depositional processes.
The sediment wedge constitutes a supersequence, which prograded along the platform margin as a result of high sediment supply and forced regression. Within the supersequence, a hierarchy of higher-order stratigraphic units (sequence sets and sequences) are developed. The individual bioclastic sediment lobes are interpreted as systems tracts and parasequences of the sequences within the sequence sets.  相似文献   

7.
Facies architecture and platform evolution of an early Frasnian reef complex in the northern Canning Basin of north‐western Australia were strongly controlled by syn‐depositional faulting during a phase of basin extension. The margin‐attached Hull platform developed on a fault block of Precambrian basement with accommodation largely generated by movement along the Mount Elma Fault Zone. Recognition of major subaerial exposure and flooding surfaces in the Hull platform (from outcrop and drillcore) has enabled comparison of facies associations within a temporal framework and led to identification of three stages of platform evolution. Stage 1 records initial ramp development on the hangingwall dip slope with predominantly deep subtidal conditions that prevented any cyclic facies arrangements. This stage is characterised by basal siliciclastic deposits and a major deepening‐upward facies pattern that is capped by a sequence boundary towards the footwall (north‐west) and a major flooding surface towards the hangingwall. Stage 2 reflects the bulk of platform aggradation, significant platform growth towards the hangingwall and the development of reef margins and cyclic facies arrangements. Thickening of this stage towards the hangingwall indicates that accommodation was generated by rotation of the fault block and overlying platform. Stage 3 records a major flooding and backstep of the platform margin. The Hull platform illustrates important elements of margin‐attached carbonate platforms in a half‐graben setting, including: (i) prominent, but limited, coarse siliciclastic input that does not have a major detrimental effect on carbonate production near the rift margin in arid to semi‐arid settings; (ii) wedge‐shaped accommodation created by syn‐depositional rotation of fault blocks and tilting of the hangingwall dip slope, resulting in shallow‐water facies and subaerial exposure up‐dip of the rotational axis and deeper water facies down‐dip; and (iii) evolution of a ramp to rimmed shelf, coincident with a sequence boundary–flooding surface, that is accelerated by tilting of the hangingwall dip slope during fault‐block rotation.  相似文献   

8.
Cross‐bedded grainstones on carbonate ramps and shelves are commonly related to the locus of major wave energy absorption such as shorelines, shoals or shelf breaks. In contrast, on the Early Tortonian carbonate platform of Menorca (Balearic Islands), coarse‐grained, cross‐bedded grainstones are found at a distance from the palaeoshoreline where they were deposited below the wavebase. Excellent exposures along continuous outcrops on the sea cliffs of Menorca reveal the depositional profile and three‐dimensional distribution of the different facies belts of the Tortonian ramp depositional system. Basinward from the palaeoshoreline, fan deltas and beach deposits pass into 5‐km‐wide gently dipping bioturbated dolopackstone (inner and middle ramp), then into 12–20°‐dipping dolograinstone/rudstone clinobeds (ramp slope) and, finally, into subhorizontal fine‐grained basinal dolowackestone to dolopackstone (outer ramp). In this Miocene example, coarse‐grained grainstones exist in five different settings other than beach deposits: (1) on the middle ramp, where cross‐bedded grainstones were deposited by currents roughly parallel to the shoreline at 40–70 m estimated water depth and are interbedded with gently dipping bioturbated dolomitized packstones; (2) on the upper slope, where clinobeds are composed mostly of in situ rhodoliths and red‐algae fragments; (3) on the lower slope, as small‐scale bedforms (small three‐dimensional subaqueous dunes) migrating parallel to the slope; (4) at the transition between the lower slope and the outer ramp, where mollusc‐rich and rhodolithic rudstones and grainstones, interbedded in dolomitized laminated wackestones containing abundant planktonic foraminifera, infill slide/slump scars as upslope‐backstepping bodies (backsets); (5) at the toe of the slope, where coarse skeletal grainstones indicate bedform migration parallel to the platform margin, induced by currents at more than 150 m estimated water depth. This Late Miocene example also illustrates how changes in intrabasinal environmental conditions (nutrients and/or temperature) may produce changes in stratal patterns and facies architecture if they affect the biological system. Two depositional sequences compose the Miocene platform on Menorca, where a reef‐rimmed platform prograded onto an earlier distally steepened ramp. The transition from the ramp to the reef‐rimmed platform was effected by an increase in accommodation space caused by ecological changes, promoting a shift from a grain‐ to a framework‐producing biota.  相似文献   

9.
Cenomanian–Turonian strata of the south‐central Pyrenees in northern Spain contain three prograding carbonate sequences that record interactions among tectonics, sea level, environment and sediment fabric in controlling sequence development. Sequence UK‐1 (Lower to Upper Cenomanian) contains distinct lagoonal, back‐margin, margin, slope and basin facies, and was deposited on a broad, flat shelf adjacent to a deep basin. The lack of reef‐constructing organisms resulted in a gently dipping ramp morphology for the margin and slope. Sequence UK‐2 (Upper Cenomanian) contains similar shallow‐water facies belts, but syndepositional tectonic modification of the margin resulted in a steep slope and deposition of carbonate megabreccias. Sequence UK‐3 (Lower to Middle Turonian) records a shift from benthic to pelagic deposition, as the shallow platform was drowned in response to a eustatic sea‐level rise, coupled with increased organic productivity. Sequences UK‐1 to UK‐3 are subdivided into lowstand, transgressive and highstand systems tracts based on stratal geometries and facies distribution patterns. The same lithologies (e.g. megabreccias) commonly occur in more than one systems tract, indicating that: (1) the depositional system responded to more than just sea‐level fluctuations; and (2) similar processes occurred during different times throughout sequence development. These sequences illustrate the complexity of carbonate platform dynamics that influence sequence architecture. Rift tectonics and flexural subsidence played a major role in controlling the location of the platform margin, maintaining a steep slope gradient through syndepositional faulting, enhancing slope instability and erosion, and influencing depositional processes, stratal relationships and lithofacies distribution on the slope. Sea‐level variations (eustatic and relative) strongly influenced the timing of sequence and parasequence boundary formation, controlled changes in accommodation and promoted platform drowning (in conjunction with other factors). Physico‐chemical and climatic conditions were responsible for reducing carbonate production rates and inducing platform drowning. Finally, a mud‐rich sediment fabric affected platform morphology, growth geometries (aggradation vs. progradation) and facies distribution patterns.  相似文献   

10.
A steep‐margined carbonate platform is developed in the Carboniferous synorogenic foreland basin of northern Spain. Dips of 60–90° produced during Late Carboniferous thrusting enable cross‐sections of a 4‐km‐wide portion of the marginal area of this platform (Las Llacerias outcrop) to be studied in aerial photographs at a seismic scale. Three stratal domains are observed: (1) a horizontal‐bedded platform; (2) a clinoformal‐bedded margin with a relief of up to 500 m; and (3) a low‐angle toe‐of‐slope, where slope beds interfinger with basin sediments. The slope shows well‐bedded sigmoidal clinoforms with depositional dips ranging from 15° to 32°. Based on lithology and stratal patterns, four facies groups have been recognized: (1) a flat‐topped platform, in which thick algal boundstone, skeletal packstone–grainstone and peloidal micrite wackestone with a poorly rhythmic character prevail; (2) the platform margin and upper slope, characterized by microbial boundstone spanning a bathymetric range of ≈150 m measured from the break of slope; (3) a slope, predominantly composed of margin‐derived rudstones and breccias; and (4) a toe‐of‐slope to basin zone, where a cyclic alternation of spiculitic siltstones, packstone to grainstone calciturbidites and rudstone/breccia is visible. Five successive stages of platform development are deduced: (1) Bashkirian: flooding of the pre‐existing Serpukhovian platform giving rise to the nucleation of a low‐angle ramp to the south‐east of the study area with microbial mud‐mound accumulations, and breccias and calciturbidites on the margins; (2) Early Moscovian: an influx of siliciclastic sediment buried part of the platform and reduced the area of carbonate sedimentation; (3) Moscovian: aggradation and progradation of the carbonate system produced an extensive steep‐margined and flat‐topped shallow‐water platform (shelf system); (4) Latest Moscovian–earliest Kasimovian: drowning of the platform; and (5) Kasimovian: covering of the platform by marly calcareous ramp sediments.  相似文献   

11.
This study highlights three‐dimensional variability of stratigraphic geometries in the ramp crest to basin of mixed carbonate–siliciclastic clinoforms in the Permian San Andres Formation. Standard field techniques and mapping using ground‐based lidar reveal a high degree of architectural complexity in channellized, scoured and mounded outer ramp stratigraphy. Development of these features was a function of location along the ramp profile and fluctuations in relative sea‐level. Deposition of coarse‐grained and fine‐grained turbidites in the distal outer ramp occurred through dilute and high‐density turbidity flows and was the result of highstand carbonate shedding within individual cycles. In this setting, high‐frequency cycles of relative sea‐level are interpreted on the basis of turbidite frequency, lateral extent and composition. Submarine siliciclastic sediment bypass during lowstand cycles resulted in variable degrees of siliciclastic preservation. Abundant siliciclastic material is preserved in the basin and distal outer ramp as point‐sourced lowstand wedges and line‐sourced early transgressive blankets. In mounded topography of the outer ramp, siliciclastic preservation is minimal to absent, and rare incised channels offer the best opportunity for recognition of a sequence boundary. Growth of mounded topography in the outer ramp began with scouring, followed by a combination of bioherm construction, fusulinid mound construction and isopachous draping. Intermound areas were then filled with sediment and continued mound growth was prevented by an accommodation limit. Mound growth was independent of high‐frequency cycles in relative sea‐level but was dependent on available accommodation dictated by low‐frequency cyclicity. Low‐angle ramp clinoforms with mounded topography in the outer ramp developed during the transgressive part of a composite sequence. Mound growth terminated as the ramp transformed into a shelf with oblique clinoform geometries during the highstand of the composite sequence. This example represents a ramp‐to‐shelf transition that is the result of forcing by relative sea‐level fluctuations rather than ecologic or tectonic controls.  相似文献   

12.
《Sedimentology》2018,65(5):1447-1481
  相似文献   

13.
A piston core from the Maldives carbonate platform was investigated for carbonate mineralogy, grain‐size distributions, calcium carbonate content and organic carbon. The sedimentary record was linked to Late Pleistocene sea‐level variations, using an age model based on oxygen isotopes obtained from planktonic foramanifera, nannofossil biostratigraphy and 14C age determinations. The correlation between the sedimentary record and Late Pleistocene sea‐level showed that variations in aragonite and mud during the past 150 000 years were clearly related to flooding and sea floor exposure of the main lagoons of the atolls of the Maldives carbonate platform. Platform flooding events were characterized by strongly increased deposition of aragonite and mud within the Inner Sea of the Maldives. Exposure events, in contrast, can be recognized by rapid decreases in the values of both proxy records. The results show that sediments on the Maldives carbonate platform contain a continuous record of Pleistocene sea‐level variations. These sediments may, therefore, contribute to a better understanding of regional and even global sea‐level changes, and yield new insights into the interplay between ocean currents and carbonate platform morphology.  相似文献   

14.
The lower part of the Early Cambrian Sekwi Formation in the Selwyn Basin of the Northwest Territories, Canada, is composed of two regional, unconformity‐bounded sequences, S0 and S1, which record the first widespread carbonate deposition during the initial Palaeozoic transgression onto the western margin of Laurentia. These Early Cambrian sequences are unique to the western North American Cordillera, representing the only record of primarily deep‐water deposition on a tectonically active, mixed carbonate–siliciclastic ramp during this period. More specifically, the geometry of the Sekwi ramp changed during deposition of S0 and S1, from a shallowly dipping homoclinal ramp during the S0 transgressive systems tract to a steeply dipping tectonically modified ramp during the early highstand systems tract of S0. The steeply dipping ramp profile of S0 was preserved into the early transgressive systems tract of S1. The Sekwi ramp returned to a gently sloping ramp during the late highstand systems tract of S1 and remained so throughout the remainder of Sekwi deposition. The evolving shape of the Sekwi ramp is attributed to syndepositional ‘down to the basin’ faulting during deposition of both S0 and S1 and is recorded by: (i) the westward thickening, irregular geometries of S0 and S1; (ii) geographical restriction of deep‐water facies (including sediment gravity flow deposits); (iii) the presence of large allochthonous blocks; and (iv) the clast composition of sediment gravity flow deposits. Sediment gravity flow deposits play an unusually important role in the sequence stratigraphic interpretation of the lower Sekwi Formation, as they delineate depositional packages, including the maximum flooding zone, the transitions between portions of systems tracts, and the inferred locations of syntectonic extensional faults. Syntectonic faults increased accommodation basinward of an extensive ooid‐shoal complex that developed along the Sekwi ramp crest, greatly influencing sequence geometry and initiating the downslope motion of sediment gravity flows. The syndepositional faulting probably was a continuation of extension that began during the latest Neoproterozoic rifting of western Laurentia. The composition of sediment gravity flow deposits track changing accommodation space on the lower Sekwi ramp and can be used to differentiate systems tracts that probably were related more to tectonism than eustasy.  相似文献   

15.
During the late Miocene, the Guadalquivir Basin and its satellite basin, the Ronda Basin, were under Atlantic cool-water influence. The aim of our study is to develop a sequence stratigraphic subdivision of the Ronda Basin fill and to provide models for the cool-water carbonates. The Upper Miocene of the Ronda Basin can be divided into three depositional sequences. Sequence 1 is early Tortonian, Sequence 2 late Tortonian to earliest Messinian, and Sequence 3 Messinian in age. The sediments were deposited in a ramp depositional system. Sequence 1 is dominated by conglomerates and marls. In Sequence 2 and Sequence 3, carbonate deposits dominate in the inner ramp whereas siliciclastics preferentially occur in the middle and outer ramp. Bryomol carbonate sediments occur in all sequences whereas rhodalgal carbonates are restricted to Sequence 3. In bays protected from siliciclastic influx, rhodalgal deposits formed under transgressive conditions. A bryomol factory occurs in zones of continuous siliciclastic supply. This distribution results from facies partitioning during the flooding of the Ronda Basin, which has a rugged and irregular relief. Embayments were protected from siliciclastic influx and provided regions with less hydraulic energy.  相似文献   

16.
This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km2 area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.  相似文献   

17.
A Lower Pleistocene carbonate platform is described from north-east Rhodes, Greece. It comprises a succession of warm temperate calcarenites (the Cape Arkhangelos calcarenite facies group) developed in a steep-sided coastal basin. The depositional setting for the sediments is a carbonate wedge developed within a larger-scale forced regression. Deposition began with aggradation of storm-dominated lower and upper shoreface deposits. Later, the development of a prograding platform produced giant clinoform foresets. A marked alternation of cross-bedded and bioturbated clinoforms indicates seasonal transport of carbonate material off the platform. Periodically, the platform edge has been deeply scoured by exceptional storms, after which further deposition repaired the platform margin, and progradation resumed. More than 20 such major storm cycles are preserved. Applying sequence stratigraphy to this succession leads to two different possible interpretations: one with a lowstand systems tract and one with a forced regressive systems tract, depending on the scale of view. The implications of this are discussed. The present example shows clearly that the application of sequence stratigraphic models to real carbonate sequences requires careful consideration of scale and context before interpretations are made.  相似文献   

18.
The Bajo Segura Basin is located in the eastern Betic Cordillera, at present connected with the Mediterranean Sea to the east. It has a complete stratigraphic record from the Tortonian to the Quaternary, which has been separated into six units bounded by unconformities. This paper is concerned with the northern edge of the basin, controlled by a major strike–slip fault (the Crevillente Fault Zone, CFZ), where the most complete stratigraphic successions are found. The results obtained (summarised below) are based on an integrated analysis of the sedimentary evolution and the subsidence-uplift movements. Unit I (Early Tortonian) is transgressive on the basin basement and is represented by ramp-type platform facies, organised in a shallowing-upward sequence related to tectonic uplift during the first stages of movement along the CFZ. Unit II (lower Late Tortonian) consists of shallow platform facies at bottom and pelagic basin facies at top, forming a deepening-upward sequence associated with tectonic subsidence due to sinistral motion along the CFZ. Unit III (middle Late Tortonian) is made up of exotic turbiditic facies related to a stage of uplift and erosion of the southern edge of the basin. Unit IV (upper Late Tortonian) consists of pelagic basin facies at bottom and shallow platform facies at top, defining a shallowing-upward sequence related to tectonic uplift during continued sinistral movement on the basin-bounding fault. Units V (latest Tortonian–Messinian) and VI (Pliocene–Pleistocene p.p.) consist of shallowing-upward sequences deposited during folding and uplift of the northern margin of the basin. No definitive evidence of any major eustatic sea-level fall, associated with the ‘Messinian salinity crisis’, has been recorded in the stratigraphic sections studied.  相似文献   

19.
The study of eight stratigraphic sections at the margin of the semi-enclosed Zsámbék Basin (Hungary) allows the sedimentary anatomy of oolitic–bioclastic systems in the Sarmatian of the Central Paratethys to be reconstructed. The mollusc, foraminiferal and ostracod associations indicate that the carbonate systems are Latest Badenian to Late Sarmatian in age. The Lower–Upper Sarmatian deposits are organized in superimposed subaqueous dunes prograding towards the basin on a low-angle ramp. During the Late Sarmatian, the ramp underwent subaerial erosion linked to a moderate relative fall in sea-level. Lagoonal deposits were later formed and microbial–nubeculariid–bryozoan–serpulid buildups were emplaced. The 'abnormal' marine conditions of the Sarmatian, conducive to the development of a poorly diversified flora and fauna and dominant non-skeletal grains, are linked to fluctuating salinities, mesotrophic to eutrophic conditions and perhaps high alkalinity.  相似文献   

20.
Post‐glacial, neritic cool‐water carbonates of the Western Mediterranean Sea were examined by means of hydroacoustic data, sediment surface sampling and vibrocoring to unravel geometries and to reconstruct sedimentary evolution in response to the last sea‐level rise. The analysed areas, located on the Alboran Ridge, in the Bay of Oran, and at the southern shelf of the island of Mallorca, are microtidal and bathed by oligotrophic to weakly mesotrophic waters. Seasonal water temperature varies between 13 °C and 27 °C. Echosounder profiles show that the Bay of Oran and the southern shelf of Mallorca are distally steepened ramps, while the Alboran Ridge forms a steep‐flanked rugged plateau around the Alboran Island. In the three areas, an up to 10 m thick post‐glacial sediment cover overlies an unconformity. In Oran and Mallorca, stacked lowstand wedges occur in water depths of 120 to 130 m. On the Alboran Ridge and in the Bay of Oran, highstand wedges occur at 35 to 40 m. Up to 5 m long cores of upper Pleistocene to Holocene successions were recovered in water depths between 40 and 81 m. Deposits contain more than 80% carbonate, with mixed carbonate‐volcaniclastics in the lower part of some cores in Alboran. The carbonates consist of up to 53% of aragonite and up to 83% of high magnesium calcite. Radiocarbon dating of bivalve shells, coralline algae and serpulid tubes indicates that deposits are as old as 12 400 cal yr bp . The carbonate factories in the three areas are dominated mostly by red algae, but some intervals in the cores are richer in bivalves. A facies rich in the gastropod Turritella, reflecting elevated surface productivity, is restricted to the Mallorca Shelf. Rhodoliths occur at the sediment surface in most areas at water depths shallower than 70 m; they form a 10 to 20 cm thick veneer overlying rhodolith‐poor bioclastic sediments which, nonetheless, contain abundant red algal debris. This rhodolith layer has been developing for the past 800 to 1000 years. Similar layers at different positions in the cores are interpreted as reflecting in situ growth of rhodoliths at times of reduced net sedimentation. Sedimentary successions in the cores record the post‐glacial sea‐level rise and the degree of sediment exposure to bottom currents. Deepening‐upward trends in the successions are either reflected by shallow to deep facies transitions or by a corresponding change of depth‐indicative red algae. There are only weak downcore variations of carbonate mineralogy, which indicate that no dissolution or high magnesium to low magnesium calcite neomorphism occurs in the shallow subsurface. These new data support the approach of using the Recent facies distribution for interpretation of past cool‐water, low‐energy, microtidal carbonate depositional systems. Hydroacoustic data show that previous Pleistocene transgressive and highstand inner ramp deposits and wedges were removed during sea‐level lowstands and accumulated downslope as stacked lowstand wedges; this suggests that, under conditions of high‐amplitude sea‐level fluctuations, the stratigraphic record of similar cool‐water carbonates may be biased.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号