首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 177 毫秒
1.
Lower Priabonian coral bioherms and biostromes, encased in prodelta marls/clays, occur in the Aínsa‐Jaca piggyback basin, in the South Central Pyrenean zone. Detailed mapping of lithofacies and bounding surfaces onto photomosaics reveals the architecture of coral buildups. Coral lithosomes occur either isolated or amalgamated in larger buildups. Isolated lithosomes are 1 to 8 m thick and a few hundred metres wide; clay content within coral colonies is significant. Stacked bioherms form low‐relief buildups, commonly 20 to 30 m thick, locally up to 50 m. These bioherms are progressively younger to the west, following progradation of the deltaic complex. The lowermost skeletal‐rich beds consist of bryozoan floatstone with wackestone to packstone matrix, in which planktonic foraminifera are abundant and light‐related organisms absent. Basal coral biostromes, and the base of many bioherms, consist of platy‐coral colonies ‘floating’ in a fine‐grained matrix rich in branches of red algae. Corals with domal or massive shape, locally mixed with branching corals and phaceloid coral colonies, dominate buildup cores. These corals are surrounded by matrix and lack organic framework. The matrix consists of wackestone to packstone, locally floatstone, with conspicuous red algal and coral fragments, along with bryozoans, planktonic and benthonic foraminifera and locally sponges. Coral rudstone and skeletal packstone, with wackestone to packstone matrix, also occur as wedges abutting the buildup margins. Integrative analysis of rock textures, skeletal components, buildup anatomy and facies architecture clearly reveal that these coral buildups developed in a prodelta setting where shifting of delta lobes or rainfall cycles episodically resulted in water transparency that allowed zooxanthellate coral growth. The bathymetric position of the buildups has been constrained from the light‐dependent communities and lithofacies distribution within the buildups. The process‐product analysis used here reinforces the hypothesis that zooxanthellate corals thrived in mesophotic conditions at least during the Late Eocene and until the Late Miocene. Comparative analysis with some selected Upper Eocene coral buildups of the north Mediterranean area show similarities in facies, components and textures, and suggest that they also grew in relatively low light (mesophotic) and low hydrodynamic conditions.  相似文献   

2.
A steep‐margined carbonate platform is developed in the Carboniferous synorogenic foreland basin of northern Spain. Dips of 60–90° produced during Late Carboniferous thrusting enable cross‐sections of a 4‐km‐wide portion of the marginal area of this platform (Las Llacerias outcrop) to be studied in aerial photographs at a seismic scale. Three stratal domains are observed: (1) a horizontal‐bedded platform; (2) a clinoformal‐bedded margin with a relief of up to 500 m; and (3) a low‐angle toe‐of‐slope, where slope beds interfinger with basin sediments. The slope shows well‐bedded sigmoidal clinoforms with depositional dips ranging from 15° to 32°. Based on lithology and stratal patterns, four facies groups have been recognized: (1) a flat‐topped platform, in which thick algal boundstone, skeletal packstone–grainstone and peloidal micrite wackestone with a poorly rhythmic character prevail; (2) the platform margin and upper slope, characterized by microbial boundstone spanning a bathymetric range of ≈150 m measured from the break of slope; (3) a slope, predominantly composed of margin‐derived rudstones and breccias; and (4) a toe‐of‐slope to basin zone, where a cyclic alternation of spiculitic siltstones, packstone to grainstone calciturbidites and rudstone/breccia is visible. Five successive stages of platform development are deduced: (1) Bashkirian: flooding of the pre‐existing Serpukhovian platform giving rise to the nucleation of a low‐angle ramp to the south‐east of the study area with microbial mud‐mound accumulations, and breccias and calciturbidites on the margins; (2) Early Moscovian: an influx of siliciclastic sediment buried part of the platform and reduced the area of carbonate sedimentation; (3) Moscovian: aggradation and progradation of the carbonate system produced an extensive steep‐margined and flat‐topped shallow‐water platform (shelf system); (4) Latest Moscovian–earliest Kasimovian: drowning of the platform; and (5) Kasimovian: covering of the platform by marly calcareous ramp sediments.  相似文献   

3.
Cross‐bedded grainstones on carbonate ramps and shelves are commonly related to the locus of major wave energy absorption such as shorelines, shoals or shelf breaks. In contrast, on the Early Tortonian carbonate platform of Menorca (Balearic Islands), coarse‐grained, cross‐bedded grainstones are found at a distance from the palaeoshoreline where they were deposited below the wavebase. Excellent exposures along continuous outcrops on the sea cliffs of Menorca reveal the depositional profile and three‐dimensional distribution of the different facies belts of the Tortonian ramp depositional system. Basinward from the palaeoshoreline, fan deltas and beach deposits pass into 5‐km‐wide gently dipping bioturbated dolopackstone (inner and middle ramp), then into 12–20°‐dipping dolograinstone/rudstone clinobeds (ramp slope) and, finally, into subhorizontal fine‐grained basinal dolowackestone to dolopackstone (outer ramp). In this Miocene example, coarse‐grained grainstones exist in five different settings other than beach deposits: (1) on the middle ramp, where cross‐bedded grainstones were deposited by currents roughly parallel to the shoreline at 40–70 m estimated water depth and are interbedded with gently dipping bioturbated dolomitized packstones; (2) on the upper slope, where clinobeds are composed mostly of in situ rhodoliths and red‐algae fragments; (3) on the lower slope, as small‐scale bedforms (small three‐dimensional subaqueous dunes) migrating parallel to the slope; (4) at the transition between the lower slope and the outer ramp, where mollusc‐rich and rhodolithic rudstones and grainstones, interbedded in dolomitized laminated wackestones containing abundant planktonic foraminifera, infill slide/slump scars as upslope‐backstepping bodies (backsets); (5) at the toe of the slope, where coarse skeletal grainstones indicate bedform migration parallel to the platform margin, induced by currents at more than 150 m estimated water depth. This Late Miocene example also illustrates how changes in intrabasinal environmental conditions (nutrients and/or temperature) may produce changes in stratal patterns and facies architecture if they affect the biological system. Two depositional sequences compose the Miocene platform on Menorca, where a reef‐rimmed platform prograded onto an earlier distally steepened ramp. The transition from the ramp to the reef‐rimmed platform was effected by an increase in accommodation space caused by ecological changes, promoting a shift from a grain‐ to a framework‐producing biota.  相似文献   

4.
Spatial information on lithofacies from outcrops is paramount for understanding the internal dynamics, external controls and degree of predictability of the facies architecture of shallow‐water carbonate‐platform tops. To quantify the spatial distribution and vertical stacking of lithofacies within an outer‐platform shoal‐barrier complex, integrated facies analysis and digital field technologies have been applied to a high‐relief carbonate platform exposed in the Djebel Bou Dahar (Lower Jurassic, High Atlas, Morocco). The outer platform is characterized by subtidal, cross‐bedded, coarse grainstone to rudstone grading into supratidal, pisoidal packstone‐rudstone with tepees that together formed a 350 to 420 m wide shoal‐barrier belt parallel to the margin. This belt acted as a topographic high separating a restricted lagoon from the subtidal, open marine region. Low‐energy tidal flats developed on the protected flank of the barrier facing the lagoon. Lithofacies patterns were captured quantitatively from outcrop and integrated into a digital outcrop model. The outcrop model enabled rapid visualization of field data and efficient extraction of quantitative data such as widths of facies belts. In addition, the spatial heterogeneity was captured in multiple time slices, i.e. during different phases of cyclic base‐level fluctuations. In general, the lateral continuity of lithofacies is highest when relative water depth increased during flooding of the platform top, establishing low‐energy subtidal conditions across the whole platform, and when the accommodation space was filled with tidal flat facies. Heterogeneity increased during deposition of the relief‐building bar facies that promoted spatial diversification of depositional environments during the initial phases of accommodation space creation. Cycles commonly are composed of a thin transgressive tidal flat unit, followed by coated‐grain rudstone bar facies. Lateral to the bar facies, pisoidal‐grainstone beach deposits accumulated. These bar and beach deposits were overlain by subtidal lagoonal facies or would grow through the maximum flooding and highstand. There the bars either graded into supratidal pisoidal facies with tepees (when accommodation space was filled) or were capped by subaerial exposure (due to a sea‐level fall). Modified embedded Markov analysis was used to test the presence of common ordering in vertical lithofacies stacking in a stationary interval (constant depositional mode). Analysis of individual sections did not reveal any ordering, which may be related to the limited thickness of these sections. Composite sections, however, rejected the null hypothesis of randomness. The addition of stratigraphically significant information to the Markov analysis, such as exposure surfaces and lateral dimensions of facies bodies, strengthens the verdict of unambiguous preferential ordering. Through careful quantitative reconstruction of stratal geometry and facies relationships in fully integrated digital outcrop models, accurate depositional models could be established that enhanced the predictability of carbonate sediment accumulation.  相似文献   

5.
Seafloor images of coarse‐grained submarine channel–levée systems commonly reveal complex braid‐plain patterns of low‐amplitude bedforms and zones of apparent bypass; however, mechanisms of channel evolution and the resultant channel‐fill architecture are poorly understood. At Playa Esqueleto the lateral relationships between various elements of a deep‐marine slope channel system are well‐exposed. Specifically, the transition from gravel‐dominated axial thalwegs to laterally persistent marginal sandstones and isolated gravel‐filled scours is revealed. Marginal sandstones pass into a monotonous thin‐bedded succession which built to form relatively low‐relief levées bounding the channel belt; in turn, the levées onlap the canyon walls. Three orders of confinement were important during the evolution of the channel system: (i) first‐order confinement was provided by the erosional canyon which confined the entire system; (ii) confined levées built of turbidite sandstones and mudstones formed the second‐order confinement, and it is demonstrated that these built from overspill at thalweg margins; and (iii) third‐order confinement describes the erosional confinement of coarse‐grained thalwegs and scours. Finer‐grained sediment was transported in suspension and largely was unaffected by topography at the scale of individual thalwegs. Facies and clast analyses of conglomerate overlying channel‐marginal scours reveal that they were deposited by composite gravity flows, which were non‐cohesive, grain‐dominant debris flows with more fluidal cores. These flows were capable of basal erosion but were strongly depositional; frictional freezing at flow margins built gravel levées, while the core maintained a more fluidal transport regime. The resultant architecture consists of matrix‐rich, poorly sorted levées bounding better‐sorted, traction‐dominated cores. The planform geometry is interpreted to have consisted of a low‐sinuosity gravel braid‐plain built by accretion around mid‐channel and bank‐attached bars. This part of the system may be analogous to fluvial systems; however, the finer‐grained sediment load formed thick suspension clouds, probably several orders of magnitude thicker than the relief of braid‐plain topography and therefore controlled by the levées and canyon wall confinement.  相似文献   

6.
Isolated, high relief carbonate platforms developed in the intracratonic basin of east-central Mexico during Albian-Cenomanian time. Relief on the platforms was of the order of 1000 m and slopes were as steep as 20–43°. Basin-margin debris aprons adjacent to the platforms comprise the Tamabra Formation. In the Sierra Madre Oriental, at the eastern margin of the Valles-San Luis Potosi Platform, an exceptionally thick (1380m) progradational basin to platform sequence of the Tamabra Formation can be divided into six lithological units. Basinal carbonate deposition that preceded deposition of the Tamabra Formation was emphatically punctuated by an allochthonous reef block 1 km long by 0·5 km wide with a stratigraphic thickness of 95 m. It is encased in Tamabra Formation unit A, approximately 360 m of peloidal-skeletal wackestone and lithoclastic-skeletal packstone that includes some graded beds. Unit B is 73 m of massive dolomite with sparse skeletal fragments and intraclasts. Unit C, 114m thick, consists of structureless skeletal wackestone passing upward into graded skeletal packstone. Interlaminated lime mudstone and fine grained bioclastic packstone with prominent horizontal burrows are interspersed near the top. Unit D is 126 m of breccia with finely interbedded skeletal grainstone and burrowed or laminated mudstone. The breccias contain a spectrum of platform-derived lithoclasts and basinal intraclasts, up to 10 m in size. The breccias are typically grain supported (rudstone) with a matrix of lightly to completely dolomitized mudstone or skeletal debris. Beds are up to several metres thick. Unit E is 206 m of massive, sucrosic dolomite that replaced breccias. Unit F is approximately 500 m of thick bedded to massive skeletal packstone with abundant rudists and a few mudstone intraclasts. Metre scale laminated lime mudstone beds are interspersed. The section is capped by El Abra Formation platform margin limestone, consisting of massive beds of caprinid packstone and grainstone with many whole valves. Depositional processes within this sequence shift from basinal pelagic or peri-platform sedimentation to distal, platform-derived, muddy turbidity currents with a large slump block (Unit A); through more proximal (coarser and cleaner) turbidity currents (Unit B?, C); to debris flows incorporating platform margin and slope debris (Units D, E). Finally, a talus of coarse, reef-derived bioclasts (Unit F) accumulated as the platform margin prograded over the slope sequence. Interspersed basinal deposits evolved gradually from largely pelagic to include influxes of dilute turbidity currents. Units containing turbidites with platform-derived bioclasts reflect flooding of the adjacent platform. Breccia blocks and lithoclasts were probably generated by erosion and collapse of the platform during lowstands. Laminated, black, pelagic carbonates, locally cherty, are interbedded with both breccias and turbidites. At least those interbedded with turbidites may have been deposited within an expanded mid-water oxygen minimum zone during relative highstands of sea level. They are in part coeval with mid-Cretaceous black shales of the Atlantic Ocean.  相似文献   

7.
The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.  相似文献   

8.
Sea floor and shallow seismic data sets of terminal submarine fan lobes can provide excellent planform timeslices of distributive deep‐water systems but commonly only limited information on cross‐sectional architecture. Extensive outcrops in the Tanqua depocentre, south‐west Karoo Basin, provide these three‐dimensional constraints on lithofacies distributions, stacking patterns, depositional geometries and the stratigraphic evolution of submarine lobe deposits at a scale comparable with modern lobe systems. Detailed study (bed‐scale) of a single‐lobe complex (Fan 3) over a 15 km by 8 km area has helped to define a four‐fold hierarchy of depositional elements from bed through to lobe element, lobe and lobe complex. The Fan 3 lobe complex comprises six distinct fine‐grained sandstone packages, interpreted as lobes, which display compensational stacking patterns on a 5 km scale. Between successive lobes are thin‐bedded, very fine‐grained sandstones and siltstones that do not change lithofacies over several kilometres and therefore are identified as a different architectural element. Each lobe is built by many lobe elements, which also display compensational stacking patterns over a kilometre scale. Thickness variations of lobe elements can be extremely abrupt without erosion, particularly in distal areas where isopach maps reveal a finger‐like distal fringe to lobes. Lobe deposits, therefore, are not simple radial sheet‐dominated systems as commonly envisaged.  相似文献   

9.
This paper regards the lower Pleistocene temperate-water carbonate deposits disconformably overlying an escarpment made up of faulted Cretaceous to Miocene limestones of the Apulia Foreland (southern Italy). Study deposits discontinuously crop out along the present-day eastern Salento sea cliff, and form isolated fan-shaped bodies, up to 1 km wide and up to 40 to 50 m thick, each of them covering an area of a few square kilometres. The internal arrangement of beds is represented by up to 25° to 30° lobate, seaward dipping clinobeds thinning and onlapping onto a rocky foreslope in the proximal sector and passing to gently inclined to sub-horizontal strata in the distal sector. Seven facies were distinguished, mainly composed of coarse-grained skeletal carbonates made up of a heterozoan association including coralline algae, large and small benthic foraminifera, echinoids, molluscs, bryozoans and serpulids. Since clinobeds were formed thanks to hyperconcentrated density flows (grain flows) bypassing the upper part of the inherited escarpment, these skeletal grains represent ex situ deposits whose shallow-marine factory was located upward (landward) with respect to the bypassed zone, likely in the almost flat area on top of the Salento Peninsula. Clinobeds are often affected by tens of metres wide and long channel-like structures interpreted as landslide scars. Inside these gullies, contorted beds (slumps) or matrix-supported intra-bioclastic floatstone/rudstone (massive deposits) are present. The occurrence of supercritical-flow structures (for example, backset-bedded beds) indicates the development of hydraulic jumps along the steep slope of gullies. Since these clinostratified, fan-shaped carbonate bodies represent carbonate slopes, and that the latter are known as aprons, normally related to linear sourced sediments, an acceptable oxymoron for studied fan-shaped carbonate bodies is suggested: ‘isolated base-of-slope aprons’.  相似文献   

10.
The Upper Cretaceous Cerro Toro Formation in the Silla Syncline, Parque Nacional Torres del Paine, Magallanes Basin, Chile, includes over 1100 m of mainly thin‐bedded mud‐rich turbidites containing three thick divisions of coarse conglomerate and sandstone. Facies distributions, stacking patterns and lateral relationships indicate that the coarse‐grained sandstone and conglomerate units represent the fill of a series of large south to south‐east trending deep‐water channels or channel complexes. The middle coarse division, informally named the Paine member, represents the fill of at least three discrete channels or channel complexes, termed Paine A, B and C. The uppermost of these, Paine C, represents a channel belt about 3·5 km wide and its fill displays explicit details of channel geometry, channel margins, and the processes of channel development and evolution. Along its northern margin, Paine C consists of stacked, laterally offset channels, each eroded into fine‐grained mudstone and thin‐bedded sandy turbidites. Along its southern margin, the Paine C complex was bounded by a single, deeply incised but stepped erosional surface. The evolution of the Paine C channel occurred through multiple cycles of activity, each involving: (i) an initial period of channel erosion into underlying fine‐grained sediments; (ii) deposition of coarse‐grained pebble to cobble conglomerate and sandstone within the channel; and (iii) waning of coarse sediment deposition and accumulation of a widespread sheet of fine‐grained, thin‐bedded turbidites inside and outside the channel. The thin‐bedded turbidites deposited within, and adjacent to, the channel along the northern margin of the Paine C complex do not appear to represent levée deposits but, rather, a separate fine‐grained turbidite system that impinged on the Paine C channel from the north. The Cerro Toro channel complex in the Silla Syncline may mark either an early axial zone of the Magallanes Basin or a local slope mini‐basin developed behind a zone of slope faulting and folding now present immediately east of the syncline. If the latter, flows moving downslope toward the basin axis further east were diverted to the south by this developing structural high, deposited part of their coarse sediment loads, and exited the mini‐basin at a point located near the south‐eastern edge of the present Silla Syncline.  相似文献   

11.
The Upper Cretaceous (Campanian–Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is compared to newly discovered contourite drifts in the Maldives. Like the drift deposits in the Maldives, the Orfento Formation fills a channel and builds a Miocene delta‐shaped and mounded sedimentary body in the basin that is similar in size to the approximately 350 km2 large coarse‐grained bioclastic Miocene delta drifts in the Maldives. The composition of the bioclastic wedge of the Orfento Formation is also exclusively bioclastic debris sourced from the shallow‐water areas and reworked clasts of the Orfento Formation itself. In the near mud‐free succession, age‐diagnostic fossils are sparse. The depositional textures vary from wackestone to float‐rudstone and breccia/conglomerates, but rocks with grainstone and rudstone textures are the most common facies. In the channel, lensoid convex‐upward breccias, cross‐cutting channelized beds and thick grainstone lobes with abundant scours indicate alternating erosion and deposition from a high‐energy current. In the basin, the mounded sedimentary body contains lobes with a divergent progradational geometry. The lobes are built by decametre thick composite megabeds consisting of sigmoidal clinoforms that typically have a channelized topset, a grainy foreset and a fine‐grained bottomset with abundant irregular angular clasts. Up to 30 m thick channels filled with intraformational breccias and coarse grainstones pinch out downslope between the megabeds. In the distal portion of the wedge, stacked grainstone beds with foresets and reworked intraclasts document continuous sediment reworking and migration. The bioclastic wedge of the Orfento Formation has been variously interpreted as a succession of sea‐level controlled slope deposits, a shoaling shoreface complex, or a carbonate tidal delta. Current‐controlled delta drifts in the Maldives, however, offer a new interpretation because of their similarity in architecture and composition. These similarities include: (i) a feeder channel opening into the basin; (ii) an excavation moat at the exit of the channel; (iii) an overall mounded geometry with an apex that is in shallower water depth than the source channel; (iv) progradation of stacked lobes; (v) channels that pinch out in a basinward direction; and (vi) smaller channelized intervals that are arranged in a radial pattern. As a result, the Upper Cretaceous (Campanian–Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is here interpreted as a carbonate delta drift.  相似文献   

12.
The early Pleistocene clastic succession of the Peri‐Adriatic basin, eastern central Italy, records the filling of a series of piggyback sub‐basins that formed in response to the development of the eastward‐verging Apennine fold‐thrust belt. During the Gelasian (2·588 to 1·806 Ma), large volumes of Apennine‐derived sediments were routed to these basins through a number of slope turbidite systems. Using a comprehensive outcrop‐based dataset, the current study documents the depositional processes, stratigraphic organization, foraminiferal age and palaeodepth, and stratigraphic evolution of one of these systems exposed in the surroundings of the Castignano village. Analysis of foraminiferal assemblages consistently indicates Gelasian deposition in upper bathyal water depths. Sediments exposed in the study area can be broken into seven main lithofacies, reflecting specific gravity‐induced depositional elements and slope background deposition: (i) clast‐supported conglomerates (conglomerate channel‐fill); (ii) amalgamated sandstones (late stage sandstone channel‐fill); (iii) medium to thick‐bedded tabular sandstones (frontal splay sandstones); (iv) thin to thick‐bedded channelized sandstones (sandy channel‐fill); (v) medium to very thin‐bedded sandstones and mudstones (levée‐overbank deposits); (vi) pebbly mudstones and chaotic beds (mudstone‐rich mass‐transport deposits); and (vii) massive mudstones (hemipelagic deposits). Individual lithofacies combine vertically and laterally to form decametre‐scale, disconformably bounded, fining‐upward lithofacies successions that, in turn, stack to form slope valley fills bounded by deeply incised erosion surfaces. A hierarchical approach to the physical stratigraphy of the slope system indicates that it has evolved through multiple cycles of waxing then waning flow energy at multiple scales and that its packaging can be described in terms of a six‐fold hierarchy of architectural elements and bounding surfaces. In this scheme, the whole system (sixth‐order element) is comprised of three distinct fifth‐order stratigraphic cycles (valley fills), which define sixth‐order initiation, growth and retreat phases of slope deposition, respectively; they are separated by discrete periods of entrenchment that generated erosional valleys interpreted to record fifth‐order initiation phases. Backfilling of individual valleys progressed through deposition of two vertically stacked lithofacies successions (fourth‐order elements), which record fifth‐order growth and retreat phases. Fourth‐order initiation phases are represented by erosional surfaces bounding lithofacies successions. The component lithofacies (third‐order element) record fourth‐order growth and retreat phases. Map trends of erosional valleys and palaeocurrent indicators converge to indicate that the sea floor bathymetric expression of a developing thrust‐related anticline markedly influenced the downslope transport direction of gravity currents and was sufficient to cause a major diversion of the turbidite system around the growing structure. This field‐based study permits the development of a sedimentological model that predicts the evolutionary style of mixed coarse‐grained and fine‐grained turbidite slope systems, the internal distribution of reservoir and non‐reservoir lithofacies within them, and has the potential to serve as an analogue for seismic or outcrop‐based studies of slope valley fills developed in actively deforming structural settings and under severe icehouse regimes.  相似文献   

13.
紫云晚石炭世叶状藻礁发育在碳酸盐岩台地边缘内。研究以碳酸盐岩微相分析为主要手段,对叶状藻礁剖面中岩石的微相特征和沉积环境研究。主要总结出6个微相类型,为生物碎屑粒泥灰岩、生物碎屑泥粒灰岩、球粒生屑泥粒灰岩、叶状藻粒泥灰岩—叶状藻泥粒灰岩、腕足泥粒灰岩、生物碎屑颗粒灰岩。总结了一个在开阔台地与台地边缘过渡带上的局部相模式,由较深水的开阔台地相、叶状藻礁相、台内斜坡相和台内较浅水的斜坡相、较浅水的开阔台地相、台内浅滩相过渡,分析总结了叶状藻礁的沉积环境。微相组合及其在剖面纵向分布规律显示,剖面的总体沉积环境为潮下带浅水开阔台地环境。   相似文献   

14.
The petrography, the geochemistry and the burial history all constrain the origin and modification history of dolomites in an ancient periplatform carbonate slope deposit,the Machari Formation (late Miclclle to early Late Cambrian),Korea. The formation is mainly composed of rhythmic bedding. laminated to bedded lime mudstone alternating with argillaceous lime mudstone. The rhythmic bedding is a product of the deposition of offshore periplatform ooze and hemipelagic clay on a periplatform slope. This formation also shows minor and intermittent influx of other lithofacies including the bioclastic-peloidal packstone, peloidal wackestone, and intraclasts deposited as turbidites. Five types of dolomite occur in the Machari Formation, whose occurrence.texture and geochemistry provide an insight into origin and modification history.  相似文献   

15.
This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km2 area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.  相似文献   

16.
The large acoustic data set acquired during the Carambar cruises is composed of high resolution bathymetry, backscatter data and very‐high resolution seismic lines which allow for an overview of the morphology and sediment transfer processes from the shallow upper slope to the abyssal plain of a modern carbonate system: the north‐eastern slope of the Little Bahama Bank. Surficial distribution of the acoustic facies and echofacies reflects a wide variety of sedimentary processes along and across the slope. The western sector of the Little Bahama Bank is dominated by depositional processes whereas its eastern sector, which is incised in the lower slope by giant canyons, is affected by erosion and bypass processes. Datasets suggest that currents play an important role both in along‐slope sedimentary processes and in the abyssal plain. The Antilles Current appears to affect a large part of the middle and lower slopes. The absence of sizeable present‐day channel/levée complexes or lobes at the mouth of the canyon – revealed by the bathymetric map – indicates that the southward flowing Deep Western Boundary Current influences modern abyssal sediment deposition. Based on depositional processes and indicators of canyon maturity observed in facies distribution, the current study proposes that differential subsidence affects the eastern versus western part of the bank. The morphology of the Great Abaco Canyon and Little Abaco Canyon, which extend parallel to the platform, and the Little Bahama Bank slope appears to be related to the Great Abaco Fracture Zone.  相似文献   

17.
Quantitative analysis of sediment composition was performed on a kilometre wide section of Upper Tithonian low relief (up to 70 m), gently inclined (3° to 15°), sigmoidal carbonate clinoforms (eastern Sardinia) to identify changes in sediment composition along the slope and across the studied succession. These changes may reflect modifications of the carbonate factory and of processes responsible for sediment transport. Point‐count analysis of carbonate microfacies, Q‐mode/R‐mode cluster analysis and Spearman’s rank provided a composition‐based classification of microfacies and highlighted relationships among sediment components. The studied clinoforms are mainly composed of non‐skeletal grains (70%), such as peloids and lithoclasts, together with micrite and cements and only a limited contribution from coated grains (2%). Among skeletal grains (28%), the greatest contribution derives from a coral–stromatoporoid–encruster reef that provided 15% of the components. Crinoids, brachiopods and other along‐slope thriving biota provided nearly 5% of the allochems, whilst fragments of molluscs (gastropods, bivalves and diceratids) from the backreef sourced another 2%. The contribution of platform interior biota is negligible (1%). The association of composition‐based facies varies along the slope. The upper slope beds consist of coral‐stromatoporoid grainstone to rudstone; the middle slope deposits are dominated by encruster‐lithoclast grainstone and packstone. At the lower slope, peloidal lithoclastic packstone as well as brachiopod–crinoidal wackestone prevail. Also the association of skeletal grains changes along the slope. The encruster–frame builder association typifies the upper slope whilst encrusters characterize the middle slope sediments. In the lower slope encrusters are equally represented as the brachiopod–crinoid association. Along‐slope compositional changes evidence a scarce downslope transport of frame builders and a progressive enrichment in along‐slope thriving biota. Quantitative analysis of microfacies allowed the sigmoidal clinoforms to be grouped into six sets. Each set gathers sigmoids with a similar sediment composition. Coated grains are dominant in the first set whilst they are lacking in the overlying sets reflecting a change in the carbonate factory. Other major compositional changes among the sets concern the relative amounts of peloids, micrite, frame builders (corals and stromatoporoids) and encrusters. The contribution of peloids varies inversely to that of cements and micrite as evidenced in the third and fifth sets which, respectively, record the highest occurrence of peloids or cement and micrite. Variations in the amount of frame builders and encrusters are instead non‐linear. High percentages of both frame builders and encrusters, as recorded in the second and fifth sets, are related to low amounts of peloids and lithoclasts that probably reflect episodes of reduced background sedimentation. This study demonstrates that quantitative analysis of carbonate microfacies represents a powerful tool that can improve the reconstruction of the stacking pattern in carbonate slope successions both in outcrop and in subsurface settings.  相似文献   

18.
During the Late Tortonian, shallow‐water temperate carbonates were deposited in a small bay on a gentle ramp linked to a small island (Alhama de Granada area, Granada Basin, southern Spain). A submarine canyon (the ‘Alhama Submarine Canyon’) developed close to the shoreline, cross‐cutting the temperate‐carbonate ramp. The Alhama Submarine Canyon had an irregular profile and steep slopes (10° to 30°). It was excavated in two phases reflected by two major erosion surfaces, the lowermost of which was incised at least 50 m into the ramp. Wedge‐shaped and trough‐shaped, concave‐up beds of calcareous (terrigenous) deposits overlie these erosional surfaces and filled the canyon. A combination of processes connected to sea‐level changes is proposed to explain the evolution of the Alhama Submarine Canyon. During sea‐level fall, part of the carbonate ramp became exposed and a river valley was excavated. As sea‐level rose, river flows continued along the submerged, former river‐channel, eroding and deepening the valley and creating a submarine canyon. At this stage, only some of the transported conglomerates were deposited locally. As sea‐level continued to rise, the river mouth became detached from the canyon head; littoral sediments, transported by longshore and storm currents, were now captured inside the canyon, generating erosive flows that contributed to its excavation. Most of the canyon infilling took place later, during sea‐level highstand. Longshore‐transported well‐sorted calcarenites/fine‐grained calcirudites derived from longshore‐drift sandwaves poured into and fed the canyon from the south. Coarse‐grained, bioclastic calcirudites derived from a poorly sorted, bioclastic ‘factory facies’ cascaded into the canyon from the north during storms.  相似文献   

19.
The margin of the Foz do Amazonas Basin saw a shift from predominantly carbonate to siliciclastic sedimentation in the early late Miocene. By this time, the Amazon shelf had also been incised by a canyon that allowed direct influx of sediment to the basin floor, thus confirming that the palaeo‐Amazon fan had already initiated by that time (9.5–8.3 Ma). Above this interval, during a prolonged lowstand, Messinian third‐order sequences are preserved only in the incised‐valley fills of the canyon with no equivalent strata on the shelf. Third‐ and fourth‐order sequences younger than Messinian are preserved on the shelf after sea‐level rise above the shelf by the early Pliocene. Sequences younger than 3.8 Ma often show fourth‐order cyclicity with an average duration of 400 ka (larger scale eccentricity cycles) often preserved in high‐sedimentation‐rate areas of river deltas. Mass wasting and transportation of slope sediments to the basin began to play an important role in sediment dispersal at least as far back as the mid‐Pliocene, after rapid progradation had produced steeper slopes more prone to failure.  相似文献   

20.

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号