首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.  相似文献   

2.
Coarse‐grained deep‐water strata of the Cerro Toro Formation in the Cordillera Manuel Señoret, southern Chile, represent the deposits of a major channel belt (4 to 8 km wide by >100 km long) that occupied the foredeep of the Magallanes basin during the Late Cretaceous. Channel belt deposits comprise a ca 400 m thick conglomeratic interval (informally named the ‘Lago Sofia Member’) encased in bathyal fine‐grained units. Facies of the Lago Sofia Member include sandy matrix conglomerate (that show evidence of traction‐dominated deposition and sedimentation from turbulent gravity flows), muddy matrix conglomerate (graded units interpreted as coarse‐grained slurry‐flow deposits) and massive sandstone beds (high‐density turbidity current deposits). Interbedded sandstone and mudstone intervals are present locally, interpreted as inner levée deposits. The channel belt was characterized by a low sinuousity planform architecture, as inferred from outcrop mapping and extensive palaeocurrent measurements. Laterally adjacent to the Lago Sofia Member are interbedded mudstone and sandstone facies derived from gravity flows that spilled over the channel belt margin. A levée interpretation for these fine‐grained units is based on several observations, which include: (i) palaeocurrent measurements that indicate flows diverged (50° to 100°) once they spilled over the confining channel margin; (ii) sandstone beds progressively thin, away from the channel belt margin; (iii) evidence that the eroded channel base was not very well indurated, including a stepped margin and injection of coarse‐grained channel material into surrounding fine‐grained units; and (iv) the presence of sedimentary features common to levées, including slumped units inferring depositional slopes dipping away from the channel margin, lenticular sandstone beds thinning distally from the channel margin, soft sediment deformation and climbing ripples. The tectonic setting and foredeep architecture influenced deposition in the axial channel belt. A significant downstream constriction of the channel belt is reflected by a transition from more tabular units to an internal architecture dominated by lenticular beds associated with a substantially increased degree of scour. Differential propagation of the fold‐thrust belt from the west is speculated to have had a major control on basin, and subsequently channel, width. The confining influence of the basin slopes that paralleled the channel belt, as well as the likelihood that numerous conduits fed into the basin along the length of the active fold‐thrust belt to the west, suggest that proximal–distal relationships observed from large channels in passive margin settings are not necessarily applicable to axial channels in elongate basins.  相似文献   

3.
Based on our detailed structural characterization, we examine possible relationships between thrust faults and strike-slip faults and thrust-cored folds and depositional units in the Silla Syncline, a 4 km wide fold composed of fine-grained mudstone, coarse sandstone and conglomerate deposits of the Cerro Toro Formation in the Magallanes foreland basin, Chilean Patagonia. The syncline is bounded on its western flank by an asymmetric anticline and on its eastern flank by a broad zone of thrust faults and associated folds, which are oriented sub-parallel to the syncline axis. Deposition of the coarse-grained units of the Silla Syncline appears to have taken place in this structurally defined trough controlled primarily by thrust fault related growth structures flanking the syncline.The syncline and surrounding area have also been deformed by two sets of strike-slip faults, one right-lateral and one left-lateral. The strike-slip and thrust faulting operated contemporaneously for much of their active periods, although it appears that thrust faulting, confined within the fine-grained units, initiated slightly earlier than strike-slip faulting. In addition, younger igneous intrusions at high angle to bedding generally localize along the strike-slip faults. The cross-cutting relationships among the intrusions, strike-slip faults, and flexural slip faults show that all these structures were active during the same period, which extends beyond mid-Miocene.These conclusions support the premise that structures in deep-water sediments are important for understanding not only the deformation of a foreland basin, but also its depositional architecture.  相似文献   

4.
Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions.  相似文献   

5.
东营凹陷永554古近系沙四段沟道浊积岩相模式   总被引：7，自引：1，他引：6  
在岩心观察基础上,通过薄片鉴定、粒度分析等测试手段,综合地质、物探和测井资料,对东营凹陷永5 5 4井区古近系沙四段砂砾岩体进行研究。结果表明,该砂砾岩体是在东营凹陷东北边缘陡坡带控盆断层及其派生的次级小断层的控制下,在与凹陷长轴近于平行的断槽中形成的深水沟道浊积岩。该沉积体岩石成分成熟度和结构成熟度均较低,碎屑物质以递变悬浮搬运为主,沉积构造具有典型的重力流成因特征。建立了沟道浊积岩退积型相模式,分析了该沟道浊积岩体的储集性能及成因,并对下一步油气勘探提出建议   相似文献   

6.
Heterozoan temperate‐water carbonates mixed with varying amounts of terrigenous grains and muddy matrix (Azagador limestone) accumulated on and at the toe of an inherited escarpment during the late Tortonian–early Messinian (late Miocene) at the western margin of the Almería–Níjar Basin in south‐east Spain. The escarpment was the eastern end of an uplifting antiform created by compressive folding of Triassic rocks of the Betic basement. Channelized coralline‐algal/bryozoan rudstone to coarse‐grained packstone, together with matrix‐supported conglomerate, are the dominant lithofacies in the higher outcrops, comprising the deposits on the slope. These sediments mainly fill small canyon‐shaped, half‐graben depressions formed by normal faults active before, during and after carbonate sedimentation. Roughly bedded and roughly laminated coralline‐algal/bryozoan rudstone to coarse‐grained packstone are the main lithofacies forming an apron of four small (kilometre‐scale) lobes at the toe of the south‐eastern side of the escarpment (Almería area). Channelized and roughly bedded coralline‐algal/bryozoan rudstone to coarse‐grained packstone, conglomerates, packstone and sandy silt accumulated in a small channel‐lobe system at the toe of the north‐eastern side of the escarpment (Las Balsas area). Carbonate particles and terrigenous grains were sourced from shallow‐water settings and displaced downslope by sediment density flows that preferentially followed the canyon‐shaped depressions. Roughly laminated rudstone to packstone formed by grain flows on the initially very steep slope, whereas the rest of the carbonate lithofacies were deposited by high‐density turbidite currents. The steep escarpment and related break‐in‐slope at the toe favoured hydraulic jumps and the subsequent deposition of coarse‐grained, low‐transport efficiency skeletal‐dominated sediment in the apron lobes. Accelerated uplift of the basement caused a relative sea‐level fall resulting in the formation of outer‐ramp carbonates on the apron lobes, which were in turn overlain by lower Messinian coral reefs. The Almería example is the first known ‘base of slope’ apron within temperate‐water carbonate systems.  相似文献   

7.
Ordovician quartz turbidites of the Lachlan Fold Belt in southeastern Australia accumulated in a marginal sea and overlapped an adjoining island arc (Molong volcanic province) developed adjacent to eastern Gondwana. The turbidite succession in the Shoalhaven River Gorge, in the southern highlands of New South Wales, has abundant outcrop and graptolite sites. The succession consists of, from the base up, a unit of mainly thick‐bedded turbidites (undifferentiated Adaminaby Group), a unit with conspicuous bedded chert (Numeralla Chert), a unit with common thin‐bedded turbidites (Bumballa Formation (new name)) and a unit of black shale (Warbisco Shale). Coarse to very coarse sandstone in the Bumballa Formation is rich in quartz and similar to sandstone in the undifferentiated Adaminaby Group. Detrital zircons from sandstone in the Bumballa Formation, and from sandstone at a similar stratigraphic level from the upper Adaminaby Group of the Genoa River area in eastern Victoria, include grains as young as 453–473 Ma, slightly older than the stratigraphic ages.The dominant detrital ages are in the interval 500–700 Ma (Pacific Gondwana component) with a lessor concentration of Grenville ages (1000–1300 Ma). This pattern resembles other Ordovician sandstones from the Lachlan Fold Belt and also occurs in Triassic sandstones and Quaternary sands from eastern Australia. The Upper Ordovician succession is predominantly fine grained, which reflects reduced clastic inputs from the source in the Middle Cambrian to earliest Ordovician Ross‐Delamerian Fold Belts that developed along the eastern active margin of Gondwana. Development of subduction zones in the Late Ordovician marginal sea are considered to be mainly responsible for the diversion of sediment and the resulting reduction in the supply of terrigenous sand to the island arc and eastern part of the marginal sea.  相似文献   

8.
Field investigation and laboratory research on flysch of the Liufengguan Group in Qinling indicate the following: (1) Sandstone of the Liufengguan Group is categorized as feldspathic lithic graywacke with a minor amount of lithic graywacke in the QFR triangular diagram. Grain size≤0.3 mm. Bedding plane structures such as groove casts and suspected flute casts can be found at the bottom of the sandstone. It is inferred that currents may have come from the southeast during deposition. Bedding structures such as ripple marks, graded bedding, parallel bedding, small-scale cross bedding, climbing bedding, suspected convolute bedding, microlamination and sliding structures have also been observed, which are of indicative significance. It is thought that the Liufengguan Group has the sedimentary characteristics of bedding, bedding plane structures and lithological assemblages of deep-sea low-density turbidity current deposits. The vertical succession of the Bouma sequence in the inner fan subfacies zone is generally incomplete: the assemblage of Ta and Tabc is commonly seen; the succession of the middle fan subfacies zone is relatively complete; and divisions Te and Tb are common in the outer fan subfacies zone. (2) The flysh of the Liufengguan Group is a sequence of deep-sea argillaceous-arenaceous submarine fan deposits, in which the authors recognize the inner, middle and outer fan subfacies and also nine types of lithofacies: normal graded sandstone (A1), medium- to thick-bedded, fine-grained sandstone (A2), medium- to thick-bedded and massive siltstone (A3), thin-bedded, fine-grained sandstone and mudstone (B1), irregular interbeds of thin-bedded, fine-grained sandstone and siltstone (B2), thin-bedded, fine-grained sandstone (C1), very thin-bedded, fine-grained sandstone (D1), olistostromes (E1) and deep-sea mudstone (F). The inner fan consists of four microfacies: natural levee (A1), water channel (A2, A3) and olistostrome (E1); in the middle fan there also occur four microfacies, i.e., branch channel (B1), branch channel (B2), interdistributary bay (D1) and olistostrome. The outer fan is made up of the branch channel (C1) and sheet sand (D1) microfacies, which alternate vertically with sediments of deep-sea plain subfacies (F). There occur fining- and thinning-upward channel deposits in the outer-fan subfacies zone of the submarine fan of the Liufengguan Group observed in this study. The quartz content of the graywacke of the deposits is all higher than 40% and may reach as high as 60%. Therefore, on the basis of the aforementioned features, this flysh should be formed in a passive continental-margin tectonic environment.  相似文献   

9.
R. D. WINN  JR  R. H. DOTT  JR 《Sedimentology》1979,26(2):203-228
The exceptionally well exposed Lago Sofia conglomerate and sandstone lenses in the Upper Cretaceous Cerro Toro Formation of southern Chile are interpreted as the channel and channel margin facies of a deep-sea fan. The north-to-south oriented channels formed on an elongate fan in a narrow retroarc basin between a rising cordillera to the west and the South American craton to the east. The great length of some of the channels (> 120 km) seems to reflect the long duration (> 30 m.y.) and stable nature of the basin. Enclosing the lenses is the fine-grained Cerro Toro Formation which represents overbank turbidite flows and hemipelagic sedimentation on levee and levee flank areas. Foraminiferal assemblages suggest deposition in 1000-2000 m of water. Most of the conglomerate has features developed by tractive currents (parallel- and cross-stratified conglomerate). Most is moderately well sorted, imbricated, and has parallel to inclined stratification; large-scale dunes up to 4 m high are exposed. Typical sediment, gravity flow structures and bedding styles (e.g. pebbly mudstones, graded conglomerate, giant flutes) are not as common in the channel deposits as are tractive features. Tractive features in the gravels apparently were developed by rolling, sliding, and saltation as the bed-load component of highly turbulent, moderate- to low-density turbidity currents flowing in a confined channel. Graded-to-massive conglomerates appear to have been deposited rapidly from fully turbulent flows; diamictites were deposited from debris flows in which fluid viscosity, yield strength, and buoyancy of the fluid were dominant. The three major conglomerate classes recognized do not occur in a systematic manner; vertical and lateral heterogeneity is the rule.  相似文献   

10.
The Otekura Formation (Early Jurassic, Pseudaucella zone) at Sandy Bay comprises part of a 10+ km thick, regressive, forearc shelf and slope sequence, the Hokonui facies belt of the Rangitata Geosyncline. The Otekura Formation is dominantly fine grained, being mostly mudstone, silty mudstone and siltstone. The sediments are volcanogenic throughout. The upper 150 m of the formation contains two 20 m thick, channelized bodies of medium-thick bedded sandy flysch, each associated with thin bedded muddy flysch interpreted as overbank turbidites. Directional indicators within the channel sequence indicate emplacement from the south-southwest. In contrast, rare turbidites that occur below the channel sequence, within the background mudstone sediment, were emplaced from the east, i.e. at right angles to the channelized flows. The immediately overlying Omaru Formation contains more abundant macrofossils, intraclastic conglomerates, and appreciable amounts of traction-emplaced cross-bedded sand. Bioturbated calcareous siltstones with an in situ molluscan fauna follow (Boatlanding Formation), and are of shelf origin. The Omaru Formation is therefore interpreted as a shelf-slope break deposit, and the Otekura Formation as an upper slope facies. Reconnaissance studies indicate that the Otekura Formation is underlain by several kilometres of dominantly fine grained, deep water slope sediments, containing occasional sand and conglomerate filled channels similar to those here described in detail from the Otekura Formation. Such channels are inferred to form when a mass-transported sand, derived from failure higher on the slope, ploughs erosively into the sea floor. After their incision, the channels served for a short time as conduits for downslope transport of sediment, the redeposited deposits of which are found filling each channel. Both channel fills at Sandy Bay are capped by thin-bedded turbidites inferred to have overspilled from similar channels nearby on the slope.  相似文献   

11.
ABSTRACT The Upper Carboniferous deep‐water rocks of the Shannon Group were deposited in the extensional Shannon Basin of County Clare in western Ireland and are superbly exposed in sea cliffs along the Shannon estuary. Carboniferous limestone floors the basin, and the basin‐fill succession begins with the deep‐water Clare Shales. These shales are overlain by various turbidite facies of the Ross Formation (460 m thick). The type of turbidite system, scale of turbidite sandstone bodies and the overall character of the stratigraphic succession make the Ross Formation well suited as an analogue for sand‐rich turbidite plays in passive margin basins around the world. The lower 170 m of the Ross Formation contains tabular turbidites with no channels, with an overall tendency to become sandier upwards, although there are no small‐scale thickening‐ or thinning‐upward successions. The upper 290 m of the Ross Formation consists of turbidites, commonly arranged in thickening‐upward packages, and amalgamated turbidites that form channel fills that are individually up to 10 m thick. A few of the upper Ross channels have an initial lateral accretion phase with interbedded sandstone and mudstone deposits and a subsequent vertical aggradation phase with thick‐bedded amalgamated turbidites. This paper proposes that, as the channels filled, more and more turbidites spilled further and further overbank. Superb outcrops show that thickening‐upward packages developed when channels initially spilled muds and thin‐bedded turbidites up to 1 km overbank, followed by thick‐bedded amalgamated turbidites that spilled close to the channel margins. The palaeocurrent directions associated with the amalgamated channel fills suggest a low channel sinuosity. Stacks of channels and spillover packages 25–40 m thick may show significant palaeocurrent variability at the same stratigraphic interval but at different locations. This suggests that individual channels and spillover packages were stacked into channel‐spillover belts, and that the belts also followed a sinuous pattern. Reservoir elements of the Ross system include tabular turbidites, channel‐fill deposits, thickening‐upward packages that formed as spillover lobes and, on a larger scale, sinuous channel belts 2·5–5 km wide. The edges of the belts can be roughly defined where well‐packaged spillover deposits pass laterally into muddier, poorly packaged tabular turbidites. The low‐sinuosity channel belts are interpreted to pass downstream into unchannellized tabular turbidites, equivalent to lower Ross Formation facies.  相似文献   

12.
《Sedimentology》2018,65(6):1918-1946
In southern Patagonia, outcrops of the Upper Cretaceous Cerro Toro Formation preserve a >150 km long deep‐water axial channel belt in the Magallanes–Austral Basin, providing a unique opportunity to investigate longitudinal variations in the depositional characteristics of a deep‐water channel system. This study documents sedimentological, stratigraphical and geochronological data from the Cerro Toro Formation in the Argentine sector of the basin. New results are integrated with previous work from the Chilean basin sector to conduct a basin‐scale comparison of the timing of deposition, provenance and lithofacies proportions. The Cerro Toro channel belt includes a nearly 1000 m thick section characterized by high‐density turbidites and mass‐wasting deposits. Two ash beds from the base of the section yield U–Pb zircon ages of 90·4 ± 2 Ma and 88·0 ± 3 Ma, indicating similar initiation ages as documented in the Chilean sector. The U–Pb detrital zircon age spectra from samples in the study area reveal similar provenance trends to samples from the Chilean basin sector, with peak age populations at 310 to 260 Ma, 160 to 135 Ma and 110 to 82 Ma. The maximum depositional age of the channel belt in the Argentine sector is 87·8 ± 1·5 Ma and all new geochronology data corroborate an 86 to 80 Ma depositional age for the main Cerro Toro channel belt. Statistical analyses of 7370 beds from nearly 8000 m of new and previously published stratigraphic sections along the entire outcrop belt suggest progressive variations in the down‐system proportion of lithofacies. In the up‐slope region, lithofacies representing mass wasting processes (for example, debris‐flow and mass‐transport deposits) account for ca 29% of the stratigraphic thickness, as opposed to 5% in the down‐slope region of the channel belt, where turbidity current deposits are more prevalent. The proportion of beds >1 m thick also decreases systematically down slope, particularly for conglomeratic turbidite deposits. This work highlights that: (i) the proportion of thick beds and distribution of lithofacies are key down‐system changes in the stratigraphic fill of this deep‐water channel belt; (ii) detrital zircon trends suggest a relatively well‐mixed longitudinal depositional system; and (iii) geochronology of the main Cerro Toro outcrop belt supports but does not necessitate the model of a single, roughly age‐equivalent, channel system. This study has implications for understanding the downslope variability in depositional processes, stratigraphic architecture and reservoir quality of submarine channel systems.  相似文献   

13.
Abstract The Panther Tongue of the Star Point Formation in central Utah contains a variety of transgressive lag deposits that, when mapped regionally, show a sensitive dependence upon pre‐existing topography of the palaeoshoreline. The Panther Tongue consists of a coarsening‐upward sandstone wedge that prograded into the Western Interior Seaway during Late Cretaceous (Santonian) time. High‐resolution sequence stratigraphic analysis revealed that this member was deposited during the long‐distance (>50 km) regression and transgression of a delta into shallow‐marine environments, containing basal highstand, forced regression, lowstand and transgressive systems tracts. Based on grain size, clast composition, lateral extent and stratigraphic position, the coarse sandstones on top of the Panther Tongue were classified into four types: (1) simple; (2) dispersed; (3) oxidized; and (4) local lags. The simple lag is composed of dark grey coarse sandstone with oyster fragments and shark teeth. This lag is typically extensively bioturbated and massive. Laminated and cross‐bedded units are also common. This type of coarse sandstone is interpreted as a typical transgressive lag. The dispersed lag differs in that it contains abundant mud and commonly occurs as multiple beds in thick intervals of muddy sandstone. Mixing of bay/estuarine and shallow ‐ marine mud with simple lag sand may be responsible for deposition of this type of coarse sandstone. The oxidized lag is distinctive in its reddish colour with extensive bioturbation and is commonly overlain by a simple lag. The local lag is composed of thin‐bedded, dark grey, coarse sandstone, occurring locally between the mouth bar and distributary channel. The variation in types, grain size and bed thickness of the coarse‐grained lags was mainly controlled by antecedent topography as suggested by immediately underlying lithofacies. Relatively thick (≈30 cm) simple lags are present on top of mouth‐bar sandstones, whereas dispersed lags are common on top of the distributary channel sandstone and in bay/estuarine and shallow‐marine mudstones. Erosion of topographic highs (mouth bar) resulted in relatively thick accumulation of simple lags. In topographic low areas such as distributary channel, estuary, bay and shallow‐marine environments, fine‐grained muddy sands that were eroded from the nearby topographic highs were redeposited. Intermittent storm waves transported coarse sands both landward and seaward, forming a dispersed lag. The net effect was reworking of local topographic relief during overall transgression, forming an apparently planar transgressive surface of erosion.  相似文献   

14.
The 3.2 km-thick late Precambrian Kongsfjord Formation Submarine Fan shows well-developed middle-fan facies-associations. Channel deposits are characterised by discrete packets of coarse-grained, medium to thick-bedded, amalgamated sandstone turbidites and other mass-flow deposits, generally 10 to 30 m thick. Individual beds, or packets of beds, wedge out and channel bases cut down by up to 11 m over a lateral distance of 150 m. Channel deposits often comprise a thinning-and-fining-upward sequence although they vary greatly in clarity. Interchannel deposits occur as packets, tens of centimetres to 25 m thick, of thin and very thin bedded Bouma Tcde siltstones and mudstones. Palaeocurrents within interchannel deposits commonly diverge from those of adjacent channel sandstones. Within the interchannel deposits, isolated beds or packets of beds occur that are both thicker bedded and coarser grained than the surrounding beds; these unusual deposits are sheet-like or fill small channels, and are interpreted as crevasse splays, lobes and channels. Packets, up to a few metres thick, of laterally discontinuous siltstone turbidites occur immediately above some of the channel sandstones, rarely below, and in some cases within interchannel deposits. These siltstones are thin to medium-bedded, show Bouma Tcd, with Tc often as climbing-ripple lamination, and commonly show soft-sediment deformation as slides, slumps, liquefaction and fluidisation structures. Palaeoflow within these packets, compared to adjacent channel sandstones, diverges by up to 90°, and in some cases channel sandstones are seen to pass laterally into these deposits with a swing in palaeocurrents from parallel to the inferred channel axis, to perpendicular to it. These deposits are thought to be levees. Channel-margin deposits are most distinctive, and they are recognised by extreme lateral wedging of channel sandstones, with concomitant thinning and fining of individual beds and their amalgamation towards the channel axis. Sliding and slumping of channel margin deposits is common. Throughout the Kongsfjord Formation Submarine Fan, channel sandstone palaeocurrents suggest a sediment-transport direction to the NE quadrant, although some channels funnelled sediment towards the southeast.  相似文献   

15.
The Grès de Champsaur turbidite system, deposited in a distal setting in the Alpine Foreland Basin of south‐eastern France, exhibits a repeated upsection alternation in sand body geometry between incised channels and sheet sands. The channels form symmetric lenticular erosional features, of width 900–1000 m (measured between the lateral limits of incision) and depth 65–115 m, and can be traced axially for up to 5 km. In each case, the channel fill is capped by a laterally persistent sandy sheet‐form interval, which lies upon a fine‐grained substrate beyond the channel margins. No intrachannel elements have been traced into the substrate sequence, suggesting that, before infill, the channels acted as open sea‐floor conduits of essentially the same dimensions as the preserved channel deposits. The channels are vertically stacked, although axial erosion juxtaposes younger channel axis deposits against the fill of older channels and their channel‐capping sheet sandstones to produce an apparently well‐connected composite sandstone body geometry. The predominant channel‐fill facies comprises coarse‐grained, amalgamated sandstones, which are commonly parallel‐ or cross‐stratified. Subsidiary facies of finer grained sandstone–mudstone couplets and clast‐bearing muddy debrites are commonly preserved as erosional remnants, suggesting a complex channel history of aggradation and erosion. The repeated cycles of channel incision, infill and transition to sheet sandstone development indicate repetitive incision and healing of the palaeo‐sea floor. A model is proposed that links incision to the development of relatively steep axial gradients (parallel to the mean dispersal direction) and the return to sheet‐form deposition to the re‐establishment of lower axial gradients, with the repetitive switch between incisional channels and sheet sandstones driven by changes in sediment input rate against a background of ongoing sea‐floor tilting.  相似文献   

16.
The Kingston Peak Formation of the Pahrump Group in the Death Valley region of the Basin and Range Province, USA, is the thick (over 3 km) mixed siliciclastic–carbonate fill of a long‐lived structurally‐complex Neoproterozoic rift basin and is recognized by some as a key ‘climatostratigraphic’ succession recording panglacial Snowball Earth events. A facies analysis of the Kingston Peak Formation shows it to be largely composed of ‘tectonofacies’ which are subaqueous mass flow deposits recording cannibalization of older Pahrump carbonate strata exposed by local faulting. Facies include siltstone, sandstone and conglomerate turbidites, carbonate megabreccias (olistoliths) and related breccias, and interbedded debrites. Secondary facies are thin carbonates and pillowed basalts. Four distinct associations of tectonofacies (‘base‐of‐scarp’; FA1, ‘mid‐slope’; FA2, ‘base‐of‐slope’; FA3, and a ‘carbonate margin’ association; FA4) reflect the initiation and progradation of deep water clastic wedges at the foot of fault scarps. ‘Tectonosequences’ record episodes of fault reactivation resulting in substantial increases in accommodation space and water depths, the collapse of fault scarps and consequent downslope mass flow events. Carbonates of FA4 record the cessation of tectonic activity and resulting sediment starvation ending the growth of clastic wedges. Tectonosequences are nested within regionally‐extensive tectono‐stratigraphic units of earlier workers that are hundreds to thousands of metres in thickness, recording the long‐term evolution of the rifted Laurentian continental margin during the protracted breakup of Rodinia. Debrite facies of the Kingston Peak Formation are classically described as ice‐contact glacial deposits recording globally‐correlative panglacials but they result from partial to complete subaqueous mixing of fault‐generated coarse‐grained debris and fine‐grained distal sediment on a slope conditioned by tectonic activity. The sedimentology (tectonofacies) and stratigraphy (tectonosequences) of the Kingston Peak Formation reflect a fundamental control on local sedimentation in the basin by faulting and likely earthquake activity, not by any global glacial climate.  相似文献   

17.
冲积扇砾岩储层作为陆相沉积储层十分重要的类型之一, 一直是我国油气勘探开发的重点领域。以准噶尔盆地西北缘某区下克拉玛依组为例, 根据砾岩储层相变快、储层非均质性强等特点, 在沉积相分析的基础上, 对储层构型特征进行了精细分析, 将储层划分为槽流砾石体、槽滩砂砾体、漫洪内砂体、漫洪内细粒、片流砾石体、漫洪外砂体、漫洪外细粒、辫流水道、辫流砂砾坝、漫流砂体、漫流细粒、径流水道和水道间细粒共13种构型单元, 其中以槽流砾石体、片流砾石体、辫流水道和辫流砂砾坝占主导。构型解剖结果显示:研究区砾岩储层槽流砾石体平面呈条带状, 剖面厚度大, 为2~8 m;片流砾石体沉积厚度大, 一般为2~7 m;辫流水道构型单元宽度为80~400 m, 剖面呈透镜状, 厚度为2~7 m;辫流砂砾坝沉积厚度较大, 为2~7 m。上述构型单元受北部和西北部方向物源控制明显。储层构型特征能有效反映储层非均质性、连通性等属性, 对油田开发具有较强的控制作用。  相似文献   

18.
通过详细测制西藏申扎县扎扛-木纠错石炭二叠系剖面,查明了拉嘎组的岩石类型、组合及沉积环境。申扎地区的拉嘎组是以暗色粉砂岩、泥岩等细碎屑岩背景下,发育若干板状、长透镜状及透镜状粗碎屑岩为特征。大部分粗碎屑岩及部分细碎屑岩的分选及磨圆很差,成熟度极低,岩性显示为杂砾岩、杂砂岩,局部地区见有花岗岩漂砾。研究认为,拉嘎组形成于冰缘解冻并后退状态下的近岸冰海沉积环境,其沉积相类型可以分为分支水道与间湾、水下冰水扇、冰碛物与冰筏、滨岸与内陆棚。鉴于其时代可能为早二叠世Sakmarian期,因此,拉嘎组可能是晚古生代冰期消融的产物。拉嘎组沉积相的识别分析对拉萨地块晚古生代的古环境和古地理有重要意义。  相似文献   

19.
Seafloor images of coarse‐grained submarine channel–levée systems commonly reveal complex braid‐plain patterns of low‐amplitude bedforms and zones of apparent bypass; however, mechanisms of channel evolution and the resultant channel‐fill architecture are poorly understood. At Playa Esqueleto the lateral relationships between various elements of a deep‐marine slope channel system are well‐exposed. Specifically, the transition from gravel‐dominated axial thalwegs to laterally persistent marginal sandstones and isolated gravel‐filled scours is revealed. Marginal sandstones pass into a monotonous thin‐bedded succession which built to form relatively low‐relief levées bounding the channel belt; in turn, the levées onlap the canyon walls. Three orders of confinement were important during the evolution of the channel system: (i) first‐order confinement was provided by the erosional canyon which confined the entire system; (ii) confined levées built of turbidite sandstones and mudstones formed the second‐order confinement, and it is demonstrated that these built from overspill at thalweg margins; and (iii) third‐order confinement describes the erosional confinement of coarse‐grained thalwegs and scours. Finer‐grained sediment was transported in suspension and largely was unaffected by topography at the scale of individual thalwegs. Facies and clast analyses of conglomerate overlying channel‐marginal scours reveal that they were deposited by composite gravity flows, which were non‐cohesive, grain‐dominant debris flows with more fluidal cores. These flows were capable of basal erosion but were strongly depositional; frictional freezing at flow margins built gravel levées, while the core maintained a more fluidal transport regime. The resultant architecture consists of matrix‐rich, poorly sorted levées bounding better‐sorted, traction‐dominated cores. The planform geometry is interpreted to have consisted of a low‐sinuosity gravel braid‐plain built by accretion around mid‐channel and bank‐attached bars. This part of the system may be analogous to fluvial systems; however, the finer‐grained sediment load formed thick suspension clouds, probably several orders of magnitude thicker than the relief of braid‐plain topography and therefore controlled by the levées and canyon wall confinement.  相似文献   

20.
Ancient stream-dominated (‘wet’) alluvial fan deposits have received far less attention in the literature than their arid/semi-arid counterparts. The Cenozoic basin fills along the Denali fault system of the northwestern Canadian Cordillera provide excellent examples of stream-dominated alluvial fan deposits because they developed during the Eocene-Oligocene temperate climatic regime in an active strike-slip orogen. The Amphitheatre Formation filled several strike-slip basins in Yukon Territory and consists of up to 1200 m of coarse siliciclastic rocks and coal. Detailed facies analysis, conglomerate: sandstone percentages (C:S), maximum particle size (MPS) distribution, and palaeocurrent analysis of the Amphitheatre Formation in two of these strike-slip basins document the transition from proximal, to middle, to distal and fringing environments within ancient stream-dominated alluvial-fan systems. Proximal fan deposits in the Bates Lake Basin are characterized by disorganized, clast-supported, boulder conglomerate and minor matrix(mud)-supported conglomerate. Proximal facies are located along the faulted basin margins in areas where C:S = 80 to 100 and where the average MPS ranges from 30 to 60 cm. Proximal fan deposits grade into middle fan, channelized, well organized cobble conglomerates that form upward fining sequences, with an average thickness of 7 m. Middle fan deposits grade basinward into well-sorted, laterally continuous beds of normally graded sandstone interbedded with trough cross-stratified sandstone. These distal fan deposits are characteristic of areas where C:S = 20 to 40 and where the average MPS ranges from 5 to 15 cm. Fan fringe deposits consist of lacustrine and axial fluvial facies. Palaeogeographic reconstruction of the Bates Lake Basin indicates that alluvial-fan sedimentation was concentrated in three parts of the basin. The largest alluvial-fan system abutted the strike-slip Duke River fault, and prograded westward across the axis of the basin. Two smaller, coarser grained fans prograded syntaxially northward from the normal-faulted southern basin margin. Facies analysis of the Burwash Basin indicates a similar transition from proximal to distal, stream-dominated alluvial fan environments, but with several key differences. Middle-fan deposits in the Burwash Basin define upward coarsening sequences 50 to 60 m thick composed of fine-grained lithofacies and coal in the lower part, trough cross-stratified sandstone in the middle, and conglomerate in the upper part of the sequence. Upward-coarsening sequences, 90–140 m thick, also are common in the fan fringe lacustrine deposits. These sequences coarsen upward from mudstone, through fine grained, ripple-laminated sandstone, to coarse grained trough cross-stratified sandstone. The upward-coarsening sequences are basinwide, facies independent, and probably represent progradation of stream-dominated alluvial-fan depositional systems. Coal distribution in the Amphitheatre Formation is closely coupled with predominant depositional processes on stream-dominated alluvial fans. The thickest coal seams occur in the most proximal part of the basin fill and in marginal lacustrine deposits. Coal development in the intervening middle and distal fan areas was suppressed by the high frequency of unconfined flow events and lateral channel mobility.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号