首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 613 毫秒
1.
The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. 40Ar/39Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during Tmax conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the Tmax (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.  相似文献   

2.
A Late Palaeozoic accretionary prism, formed at the southwestern margin of Gondwana from Early Carboniferous to Late Triassic, comprises the Coastal Accretionary Complex of central Chile (34–41°S). This fossil accretionary system is made up of two parallel contemporaneous metamorphic belts: a high‐pressure/low temperature belt (HP/LT – Western Series) and a low pressure/high temperature belt (LP/HT – Eastern Series). However, the timing of deformation events associated with the growth of the accretionary prism (successive frontal accretion and basal underplating) and the development of the LP/HT metamorphism in the shallower levels of the wedge are not continuously observed along this paired metamorphic belt, suggesting the former existence of local perturbations in the subduction regime. In the Pichilemu region, a well‐preserved segment of the paired metamorphic belt allows a first order correlation between the metamorphic and deformational evolution of the deep accreted slices of oceanic crust (blueschists and HP greenschists from the Western Series) and deformation at the shallower levels of the wedge (the Eastern Series). LP/HT mineral assemblages grew in response to arc‐related granitic intrusions, and porphyroblasts constitute time markers recording the evolution of deformation within shallow wedge material. Integrated P–T–t–d analysis reveals that the LP/HT belt is formed between the stages of frontal accretion (D1) and basal underplating of basic rocks (D2) forming blueschists at c. 300 Ma. A timeline evolution relating the formation of blueschists and the formation and deformation of LP/HT mineral assemblages at shallower levels, combined with published geochronological/thermobarometric/geochemistry data suggests a cause–effect relation between the basal accretion of basic rocks and the deformation of the shallower LP/HT belt. The S2 foliation that formed during basal accretion initiated near the base of the accretionary wedge at ~30 km depth at c. 308 Ma. Later, the S2 foliation developed at c. 300 Ma and ~15 km depth shortly after the emplacement of the granitoids and formation of the (LP/HT) peak metamorphic mineral assemblages. This shallow deformation may reflect a perturbation in the long‐term subduction dynamics (e.g. entrance of a seamount), which would in turn have contributed to the coeval exhumation of the nearby blueschists at c. 300 Ma. Finally, 40Ar–39Ar cooling ages reveal that foliated LP/HT rocks were already at ~350 °C at c. 292 Ma, indicating a rapid cooling for this metamorphic system.  相似文献   

3.
M.G. Audley-Charles   《Tectonophysics》2004,389(1-2):65-79
The bathymetry and abrupt changes in earthquake seismicity around the eastern end of the Java Trench suggest it is now blocked south–east of Sumba by the Australian, Jurassic-rifted, continental margin forming the largely submarine Roti–Savu Ridge. Plate reconstructions have demonstrated that from at least 45 Ma the Java Trench continued far to the east of Sumba. From about 12 Ma the eastern part of the Java Trench (called Banda Trench) continued as the active plate boundary, located between what was to become Timor Island, then part of the Australian proximal continental slope, and the Banda Volcanic Arc. This Banda Trench began to be obliterated by continental margin-arc collision between about 3.5 and 2 Ma.The present position of the defunct Banda Trench can be located by use of plate reconstructions, earthquake seismology, deep reflection seismology, DSDP 262 results and geological mapping as being buried under the para-autochthon below the foothills of southern Timor. Locating the former trench guides the location of the apparently missing large southern part of the Banda forearc that was carried over the Australian continental margin during the final stage of the period of subduction of that continental margin that lasted from about 12 Ma to about 3.5 Ma.Tectonic collision is defined and distinguished from subduction and rollback. Collision in the southern part of the Banda Arc was initiated when the overriding forearc basement of the upper plate reached the proximal part of the Australian continental slope of the lower plate, and subduction stopped. Collision is characterised by fold and thrust deformation associated with the development of structurally high decollements. This collision deformed the basement and cover of the forearc accretionary prism of the upper plate with part of the unsubducted Australian cover rock sequences from the lower plate. Together with parts of the forearc basement they now form the exposed Banda orogen. The conversion of the northern flank of the Timor Trough from being the distal part of the Banda forearc accretionary prism, carried over the Australian continental margin, into a foreland basin was initiated by the cessation of subduction and simultaneous onset of collisional tectonics.This reinterpretation of the locked eastern end of the Java Trench proposes that, from its termination south of Sumba to at least as far east as Timor, and probably far beyond, the Java-Banda Trench and forearc overrode the subducting Australian proximal continental slope, locally to within 60 km of the shelf break. Part of the proximal forearc's accretionary prism together with part of the proximal continental slope cover sequence were detached and thrust northwards over the Java-Banda Trench and forearc by up to 80 km along the southwards dipping Savu Thrust and Wetar Suture. These reinterpretations explain the present absence of any discernible subduction ocean trench in the southern Banda Arc and the narrowness of the forearc, reduced to 30 km at Atauro, north of East Timor.  相似文献   

4.
《Sedimentology》2018,65(4):1067-1096
Submarine landslides, including the basal shear surfaces along which they fail, and their subsequent infill, are commonly observed in modern seabed and seismic reflection data sets; their resultant relief impacts sediment routing and storage patterns on continental margins. Here, three stacked submarine landslides are documented from the Permian Ecca Group, Laingsburg depocentre, Karoo Basin, South Africa, including two superimposed lateral margins. The stratigraphic framework includes measured sections and correlated surfaces along a 3 km long, 150 m high outcrop. Two stacked 2·0 to 4·5 km wide and 90 m and 60 m deep erosion surfaces are recognized, with lateral gradients of 8° and 4°, respectively. The aim of this study was to understand the evolution of a submarine landslide complex, including: evolution of basal shear surfaces/zones; variation of infill confinement; and location of the submarine landslides in the context of basin‐scale sedimentation and degradation rates. Three stages of formation are identified: (i) failure of submarine landslide 1, with deposition of unconfined remobilized deposits; (ii) failure of submarine landslide 2, forming basal shear surface/zone 1, with infill of remobilized deposits and weakly confined turbidites; and (iii) failure of submarine landslide 3, forming basal shear surface/zone 2, with infill of remobilized deposits and confined turbidites, transitioning stratigraphically to unconfined deposits. The expression of basal shear varies laterally, from metres thick zones in silt‐rich strata to sharp stepped surfaces in sand‐rich strata. Faulting and rotation of overlying bedding suggest that the shear surfaces/zones were dynamic. Stacking of landslides resulted from multi‐phase slope failure, increasing down‐dip topography and confinement of infilling deposits. The failure slope was probably a low supply tilted basin margin evidenced by megaclast entrainment from underlying basin‐floor successions and the lack of channel systems. This study develops a generic model of landslide infill, as a function of sedimentation and degradation rates, which can be applied globally.  相似文献   

5.
Lower crustal xenoliths erupted from an intraplate diatreme reveal that a portion of the New Zealand Gondwana margin experienced high‐temperature (HT) to ultrahigh‐temperature (UHT) granulite facies metamorphism just after flat slab subduction ceased at c. 110–105 Ma. P–T calculations for garnet–orthopyroxene‐bearing felsic granulite xenoliths indicate equilibration at ~815 to 910°C and 0.7 to 0.8 GPa, with garnet‐bearing mafic granulite xenoliths yielding at least 900°C. Supporting evidence for the attainment of HT and UHT conditions in felsic granulite comes from re‐integration of exsolution in feldspar (~900–950°C at 0.8 GPa), Ti‐in‐zircon thermometry on Y‐depleted overgrowths on detrital zircon grains (932°C ± 24°C at aTiO2 = 0.8 ± 0.2), and correlation of observed assemblages and mineral compositions with thermodynamic modelling results (≥850°C at 0.7 to 0.8 GPa). The thin zircon overgrowths, which were mainly targeted by drilling through the cores of grains, yield a U–Pb pooled age of 91.7 ± 2.0 Ma. The cause of Late Cretaceous HT‐UHT metamorphism on the Zealandia Gondwana margin is attributed to collision and partial subduction of the buoyant oceanic Hikurangi Plateau in the Early Cretaceous. The halt of subduction caused the fore‐running shallowly dipping slab to rollback towards the trench position and permitted the upper mantle to rapidly increase the geothermal gradient through the base of the extending (former) accretionary prism. This sequence of events provides a mechanism for achieving regional HT–UHT conditions in the lower crust with little or no sign of this event at the surface.  相似文献   

6.
The continental shelf and slope of southern Central Chile have been subject to a number of international as well as Chilean research campaigns over the last 30 years. This work summarizes the geologic setting of the southern Central Chilean Continental shelf (33°S–43°S) using recently published geophysical, seismological, sedimentological and bio-geochemical data. Additionally, unpublished data such as reflection seismic profiles, swath bathymetry and observations on biota that allow further insights into the evolution of this continental platform are integrated. The outcome is an overview of the current knowledge about the geology of the southern Central Chilean shelf and upper slope. We observe both patches of reduced as well as high recent sedimentation on the shelf and upper slope, due to local redistribution of fluvial input, mainly governed by bottom currents and submarine canyons and highly productive upwelling zones. Shelf basins show highly variable thickness of Oligocene-Quaternary sedimentary units that are dissected by the marine continuations of upper plate faults known from land. Seismic velocity studies indicate that a paleo-accretionary complex that is sandwiched between the present, relatively small active accretionary prism and the continental crust forms the bulk of the continental margin of southern Central Chile.  相似文献   

7.
Three tectonic units have been recognized in the Chifeng area, Inner Mongolia, from north to south, including the Qiganmiao accretionary prism, Jiefangyingzi arc belt and Sidaozhangpeng molasse basin, which formed an Andeantype active continent margin during the early to middle Paleozoic. The Qiganmiao accretionary prism is characterized by a mélange that consists of gabbro, two-mica quartz schist and basic volcanic rock blocks and heterogeneously deformed marble matrix. Two zircon U-Pb ages of 446.0±6.3 Ma and 1104±27 Ma have been acquired and been interpreted as the metamorphic and forming ages for the gabbro and two-mica quartz schist, respectively. The prism formed during the early to middle Paleozoic southward subduction of the Paleo Asian Ocean(PAO) and represents a suture between the North China craton(NCC) and Central Asian Orogenic Belt(CAOB). The Jiefangyingzi arc belt consists of pluton complex and volcanic rocks of the Xibiehe and Badangshan Formations, and Geochronology analysis indicates that the development of it can be divided into two stages. The first stage is represented by the Xibiehe Formation volcanic rocks, which belong to the subalkaline series, enriched LREE and LILE and depleted HFSE, with negative Eu anomalies, and plot in the volcanic arc field in discrimination diagrams. These characters indicate that the Xibiehe Formation results from to the continental arc magmatic activity related to the subduction of the PAO during 400–420 Ma. Magmatism of the second stage in 380–390 Ma consists of the Badangshan Formation volcanic rocks. Geochemistry analysis reveals that rhyolite, basaltic andesite and basalt of the Badangshan Formation were developed in continental margin arc setting. Moreover, the basaltic andesite and basalt display positive Sr anomalies, and the basalt have very low Nb/La values, suggesting that fluid is involved in magma evolution and the basalts were contaminated by continental crust. The sequence of Sidaozhangpeng molasse basin is characterized by proximity, coarseness and large thickness, similar to the proximity molasses basin. According to our field investigation, geochronological and geochemical data, combined with previous research in this area, a tectonic evolutionary model for Andes-type active continental margin of the CAOB has been proposed, including a development of the subduction-free PAO before 446 Ma, a subduction of the PAO and arc-related magmatism during 446–380 Ma, and formation of a molasse basin during 380–360 Ma.  相似文献   

8.
The classical model of trough mouth fan (TMF) formation was developed in the Polar North Atlantic to explain large submarine fans situated in front of bathymetric troughs that extend across continental shelves to the shelf break. This model emphasizes the delivery of large volumes of subglacial sediment to the termini of ice streams flowing along troughs, and subsequent re‐deposition of this glacigenic sediment down the continental slope via debris‐flow processes. However, there is considerable variation in terms of the morphology and large‐scale sediment architecture of continental slopes in front of palaeo‐ice streams. This variability reflects differences in slope gradient, the relative contributions of meltwater sedimentation compared with debris‐flow deposition, and sediment supply/geology of the adjacent continental shelf. TMF development is favoured under conditions of a low (<1°) slope gradient; a passive‐margin tectonic setting; abundant, readily erodible sediments on the continental shelf ‐ and thus associated high rates of sediment delivery to the shelf edge; and a wide continental shelf. The absence of large sediment fans on continental slopes in front of cross‐shelf troughs should not, however, be taken to indicate the former absence of palaeo‐ice streams in the geological record.  相似文献   

9.
To understand tectono‐metamorphic processes within or close to the brittle–ductile transition of quartz‐rich crustal rocks in an accretionary wedge, an integrated field, petrological, geochronological and Raman spectroscopic study was conducted on the Mikabu‐Northern Chichibu belt in SW Japan. Field mapping in central Shikoku reveals that the Northern Chichibu belt is comprised of a pile of four tectono‐stratigraphic units, referred to as A, B, C and D units. The A unit (dominated by pelagic sedimentary rocks) represents the structurally lowest and youngest accretionary complex that forms a composite unit with the Mikabu ophiolitic suite. The B unit (consisting of chert‐clastic rock sequences) overlies the A unit and is overlain by the C and D units (mudstone‐matrix mélange units). Raman spectroscopy of carbonaceous material constrains the peak temperature of each unit to be ~290°C for the A unit, 270–290°C for the B unit, 230–250°C for the C unit and ~220°C for the D unit. Ductile deformation and pervasive metamorphism are limited to rocks in the Mikabu, A and B units. Alkali pyroxene and sodic amphibole occur in metabasite from the Mikabu, A and B units, and the widespread occurrence of prograde veins containing lawsonite+quartz pseudomorphs after laumontite was newly recognized from the C unit. Phase petrological data constrain the peak pressure of each unit to be ~0.65 GPa for the Mikabu‐A unit (aragonite stable), ~0.45–0.6 GPa for the B unit (jadeite+albite stable in the structurally lower part), and ~0.35 GPa for the C unit (prehnite+lawsonite stable). The peak metamorphic pressure increases towards structurally lower and younger accretionary complexes, but the thickness of the preserved strata is insufficient to account for the inferred pressure range. The structural–metamorphic relations imply thickening of the accretionary wedge by underplating was followed by a significant phase of thinning by both ductile and brittle processes.  相似文献   

10.
We present results from a 484 km wide-angle seismic profile acquired in the northwest part of the South China Sea (SCS) during OBS2006 cruise. The line that runs along a previously acquired multi-channel seismic line (SO49-18) crosses the continental slope of the northern margin, the Northwest Subbasin (NWSB) of the South China Sea, the Zhongsha Massif and partly the oceanic basin of the South China Sea. Seismic sections recorded on 13 ocean-bottom seismometers were used to identify refracted phases from the crustal layer and also reflected phases from the crust-mantle boundary (Moho). Inversion of the traveltimes using a simple start model reveals crustal images in the study area. The velocity model shows that crustal thickness below the continental slope is between 14 and 23 km. The continental part of the line is characterized by gentle landward mantle uplift and an abrupt oceanward one. The velocities in the lower crust do not exceed 6.9 km/s. With the new data we can exclude a high-velocity lower crustal body (velocities above 7.0 km/s) at the location of the line. We conclude that this part of the South China Sea margin developed by a magma-poor rifting. Both, the NWSB and the Southwest Sub-basin (SWSB) reveal velocities typical for oceanic crust with crustal thickness between 5 and 7 km. The Zhongsha Massif in between is extremely stretched with only 6–10 km continental crust left. Crustal velocity is below 6.5 km/s; possibly indicating the absence of the lower crust. Multi-channel seismic profile shows that the Yitongansha Uplift in the slope area and the Zhongsha Massif are only mildly deformed. We considered them as rigid continent blocks which acted as rift shoulders of the main rift subsequently resulting in the formation of the Northwest Sub-basin. The extension was mainly accommodated by a ductile lower crustal flows, which might have been extremely attenuated and flow into the oceanic basin during the spreading stage. We compared the crustal structures along the northern margin and found an east-west thicken trend of the crust below the continent slope. This might be contributed by the east-west sea-floor spreading along the continental margin.  相似文献   

11.
Temperature measurements carried out on 9 hydrocarbon exploration boreholes together with Bottom Simulating Reflectors (BSRs) from reflection seismic images are used in this study to derive geothermal gradients and heat flows in the northern margin of the South China Sea near Taiwan. The method of Horner plot is applied to obtain true formation temperatures from measured borehole temperatures, which are disturbed by drilling processes. Sub-seafloor depths of BSRs are used to calculate sub-bottom temperatures using theoretical pressure/temperature phase boundary that marks the base of gas hydrate stability zone. Our results show that the geothermal gradients and heat flows in the study area range from 28 to 128 °C/km and 40 to 159 mW/m2, respectively. There is a marked difference in geothermal gradients and heat flow beneath the shelf and slope regions. It is cooler beneath the shelf with an average geothermal gradient of 34.5 °C/km, and 62.7 mW/m2 heat flow. The continental slope shows a higher average geothermal gradient of 56.4 °C/km, and 70.9 mW/m2 heat flow. Lower heat flow on the shelf is most likely caused by thicker sediments that have accumulated there compared to the sediment thickness beneath the slope. In addition, the continental crust is highly extended beneath the continental slope, yielding higher heat flow in this region. A half graben exists beneath the continental slope with a north-dipping graben-bounding fault. A high heat-flow anomaly coincides at the location of this graben-bounding fault at the Jiulong Ridge, indicating vigorous vertical fluid convection which may take place along this fault.  相似文献   

12.
In North Africa, the Algerian margin is made of basement blocks that drifted away from the European margin, namely the Kabylia, and docked to the African continental crust in the Early Miocene. This young margin is now inverted, as dated Miocene (17 Ma) granites outcrop alongshore, evidencing kilometre‐scale exhumation since their emplacement. Age of inversion is actually unknown, although Pliocene is often considered in the offshore domain. To decipher the exhumation history of the margin between 17 and 5 Ma, we performed a coupled apatite fission track (AFT) and (U–Th–Sm)/He (AHe) study in the Cap Bougaroun Miocene granite. AFT dates range between 7 ± 1 and 10 ± 1 Ma, and mean AHe dates between 8 ± 2 and 10 ± 1 Ma. These data evidence rapid and multi‐kilometre exhumation during Tortonian times. This event cannot be related to slab break‐off but instead to the onset of margin inversion that has since developed as an in‐sequence north‐verging deforming prism.  相似文献   

13.
The present day Taupo-Hikurangi subduction system is a southward extension of the Tonga-Kermadec Arc system into a sediment-rich continental margin environment. It consists of a shallow structural trench (the Hikurangi Trough), a 150 km wide, imbricate thrust controlled accretionary borderland (the continental slope, shelf, and coastal hills of eastern North Island), a frontal ridge (the main “greywacke” ranges of North Island), and a volcanic arc and marginal basin (the Taupo Volcanic Zone).Structural elements become progressively more elevated and subduction more oblique towards the south. The whole NNE-trending system is truncated at a largely strike-slip, transform boundary that extends along the southwestern part of the Hikurangi Trough and the Hope fault of South Island to the main Alpine Fault.The volcanic arc is 200–270 km from the structural trench and comprises a NNE trending chain of andesite-dacite volcanoes extending along the eastern side of the Taupo Volcanic Zone. Most of the andesites are olivine-bearing and have been erupted within the last 50,000 years.It is suggested the Taupo-Hikurangi margin has evolved by rotation of accretionary elements, from an original NW-trending subduction system north of New Zealand. The older elements of the prism were associated with subduction of a re-entrant of the Pacific Plate (and perhaps the South Fiji Basin) in Mid Tertiary times. They subsequently became separated from their NW-trending volcanic arc by dextral strike-slip movement along curved faults east of the main “greywacke” ranges. During the Plio-Pleistocene, oblique subduction and accretion intensified as the Taupo-Hikurangi margin rotated into line with the NNE-trending Kermadec system and a marginal basin was developed along a similar trend to form the Taupo Volcanic Zone. Within the last 50,000 years olivine-bearing andesite volcanism has commenced along the eastern side of the Taupo Volcanic Zone.  相似文献   

14.
The northern Gioia Basin of the south‐east Tyrrhenian Sea is a slope basin, ～ 20 km wide and ～ 50 km long, with a bathymetry of ≤ 1300 m, bounded by the Calabro‐Sicilian landmass and the Aeolian Island Arc. Coarse sediment is supplied from the Calabrian margin, where the shelf is very narrow to non‐existent, whereas the wider shelf on the Sicilian margin prevents supply by storing river‐fed sediments. The basin is dominated by the Gioia–Mesima canyon/channel system paralleled by a tongue‐shaped depositional lobe. Multibeam bathymetric surveys, sea floor reflectivity data and airgun seismic profiles reveal the recent evolution of the submarine system. Slope canyons and basin‐floor levéed channels formed where major rivers built deltas at the shelfless Calabrian margin and strong hyperpycnal flows predominated. The channels are a few hundred metres wide and a few tens of metres deep, with a downslope change from a straight to meandering pattern where the slope gradient decreases from 3·2% to 1·7%. The Mesima Channel has its lower segment abandoned because of avulsion and crevasse‐splay formation at an upslope bend. The adjacent Gioia Channel has had its upper segment straightened and lower segment entrenched because of erosional deepening of the Stromboli Valley into which it debouches and which acts as the local base level. Overbank features include levées, coalescent splays and ‘yazoo’ channels; their nature and surface characteristics depend upon the magnitude and sediment grain‐size of spill‐over flows. On an adjoining narrow shelf sliver of the Calabrian margin, in contrast, the coalescing plumes of sediment suspension supplied by an array of smaller coastal streams were apparently spilling over the shelf edge, scouring a funnel‐shaped bypass depression with chutes and forming an elongate, non‐channellized depositional lobe at the slope base. The study demonstrates the impact of sediment source type, shelf width, basin‐floor gradient and base‐level change on the style of deep‐water sedimentation.  相似文献   

15.
构造控制型天然气水合物矿藏及其特征   总被引：12，自引：4，他引：12  
构造环境是天然气水合物富集成藏的重要控制因素,增生楔、断裂体系、褶皱、(泥)底辟、滑塌等特殊构造体是影响天然气水合物成藏的主要地质载体。通过对这些特殊构造体与天然气水合物成藏关系的研究,结合流体活动对水合物形成的影响,总结出陆缘地区有增生楔型、盆缘斜坡型、埋藏背斜型、断褶型、滑塌型及底辟型等六类构造控制型水合物矿藏。南海位于欧亚板块、太平洋板块及印澳板块的交汇处,早期为活动陆缘,晚期演化为被动陆缘,其构造活动具有早期张裂、后期挤压的特点,这既不同于被动陆缘,也有别于活动陆缘,可视为“复合型”大陆边缘,兼具了“被动陆缘沉积速率高、活动陆缘构造活跃”的优点,从而形成了“增生楔型、断褶型、底辟型、滑塌型、盆缘斜坡型”等多种构造控制型水合物矿藏,是“复合型”大陆边缘水合物成藏地质模式的典型代表。  相似文献   

16.
《China Geology》2020,3(4):611-622
The Makran accretionary prism is located at the junction of the Eurasian Plate, Arabian Plate and Indian Plate and is rich in natural gas hydrate (NGH) resources. It consists of a narrow continental shelf, a broad continental slope, and a deformation front. The continental slope can be further divided into the upper slope, middle slope, and lower slope. There are three types of diapir structure in the accretionary prism, namely mud diapir, mud volcano, and gas chimney. (1) The mud diapirs can be grouped into two types, namely the ones with low arching amplitude and weak-medium activity energy and the ones with high arching amplitude and medium-strong activity energy. The mud diapirs increase from offshore areas towards onshore areas in general, while the ones favorable for the formation of NGH are mainly distributed on the middle slope in the central and western parts of the accretionary prism. (2) The mud volcanoes are mainly concentrated along the anticline ridges in the southern part of the lower slope and the deformation front. (3) The gas chimneys can be grouped into three types, which are located in piggyback basins, active anticline ridges, and inactive anticline ridges, respectively. They are mainly distributed on the middle slope in the central and western parts of the accretionary prism and most of them are accompanied with thrust faults. The gas chimneys located at different tectonic locations started to be active at different time and pierced different horizons. The mud diapirs, mud volcanoes, and gas chimneys and thrust faults serve as the main pathways of gas migration, and thus are the important factors that control the formation, accumulation, and distribution of NGH in the Makran accretionary prism. Mud diapir/gas chimney type hydrate develop in the middle slope, mud volcano type hydrate develop in the southern lower slope and the deformation front, and stepped accretionary prism type hydrate develop on the central and northern lower slope. The middle slope, lower slope and deformation front in the central and western parts of the Makran accretionary prism jointly constitute the NGH prospect area.  相似文献   

17.
Progress in the Study of Deep Profiles of Tibet and the Himalayas (INDEPTH)   总被引：5，自引：0，他引：5  
This paper introduces 8 major discoveries and new understandings with regard to the deep structure and tectonics of the Himalayas and Tibetan Plateau obtained in Project INDEPTH, They are mainly as follows. (1) The upper crust, lower crust and mantle lithosphere beneath the blocks of the plateau form a "sandwich" structure with a relatively rigid-brittle upper crust, a visco-plastic lower crust and a relatively rigid-ductile mantle lithosphere. This structure is completely different from that of monotonous, cold and more rigid oceanic plates. (2) In the process of north-directed collision-compression of the Indian subcontinent, the upper crust was attached to the foreland in the form of a gigantic foreland accretionary wedge. The interior of the accretionary wedge thickened in such tectonic manners as large-scale thrusting, backthrusting and folding, and magmatic masses and partially molten masses participated in the crustal thickening. Between the upper crust and lower crust lies a large detachment (e.g  相似文献   

18.
The Chandman massif, a typical structure of the Mongolian Altai, consists of a migmatite–magmatite core rimmed by a lower grade metamorphic envelope of andalusite and cordierite‐bearing schists. The oldest structure in the migmatite–magmatite core is a subhorizontal migmatitic foliation S1 parallel to rare granitoid sills. This fabric is folded by upright folds F2 and transposed into a vertical migmatitic foliation S2 that is syn‐tectonic, with up to several tens of metres thick granitoid sills. Sillimanite–ilmenite–magnetite S1 inclusion trails in garnet constrain the depth of equilibration during the S1 fabric to 6–7 kbar at 710–780 °C. Reorientation of sillimanite into the S2 fabric indicates that the S1–S2 fabric transition occurred in the sillimanite stability field. The presence of cordierite, and garnet rim chemistry point to decompression to 3–4 kbar and 680–750 °C during development of the S2 steep fabric, and post‐tectonic andalusite indicates further decompression to 2–3 kbar and 600–650 °C. Widespread crystallization of post‐tectonic muscovite is explained by the release of H2O from crystallizing partial melt. In the metamorphic envelope the subhorizontal metamorphic schistosity S1 is heterogeneously affected by upright F2 folds and axial planar subvertical cleavage S2. In the north, the inclusion trails in garnet are parallel to the S1 foliation, and the garnet zoning indicates nearly isobaric heating from 2.5 to 3 kbar and 500–530 °C. Cordierite contains crenulated S1 inclusion trails and has pressure shadows related to the formation of the S2 fabric. The switch from the S1 to the S2 foliation occurred near 2.5–3 kbar and 530–570 °C; replacement of cordierite by fine‐grained muscovite and chlorite indicates further retrogression and cooling. In the south, andalusite containing crenulated inclusion trails of ilmenite and magnetite indicates heating during the D2 deformation at 3–4 kbar and 540–620 °C. Monazite from a migmatite analysed by LASS yielded elevated HREE concentrations. The grain with the best‐developed oscillatory zoning is 356 ± 1.0 [±7] Ma (207Pb‐corrected 238U/206Pb), considered to date the crystallization from melt in the cordierite stability ~680 °C and 3.5 kbar, whereas the patchy BSE‐dark domains give a date of 347 ± 4.2 [±7] Ma interpreted as recrystallization at subsolidus conditions. The earliest sub‐horizontal fabric is associated with the onset of magmatism and peak of P–T conditions in the deep crust, indicating important heat input associated with lower crustal horizontal flow. The paroxysmal metamorphic conditions are connected with collapse of the metamorphic structure, an extrusion of the hot lower crustal rocks associated with vertical magma transfer and a juxtaposition of the hot magmatite–migmatite core with supracrustal rocks. This study provides information about tectono‐thermal history and time‐scales of horizontal flow and vertical mass and heat transfer in the Altai orogen. It is shown that, similar to collisional orogens, doming of partially molten rocks assisted by syn‐orogenic magmatism can be responsible for the exhumation of orogenic lower crust in accretionary orogenic systems.  相似文献   

19.
The lateral ending of the South Shetland Trench is analysed on the basis of swath bathymetry and multichannel seismic profiles in order to establish the tectonic and stratigraphic features of the transition from an northeastward active to a southwestward passive margin style. This trench is associated with a lithospheric-scale thrust accommodating the internal deformation in the Antarctic Plate and its lateral end represents the tip-line of this thrust. The evolutionary model deduced from the structures and the stratigraphic record includes a first stage with a compressional deformation, predating the end of the subduction in the southwestern part of the study area that produced reverse faults in the oceanic crust during the Tortonian. The second stage occurred during the Messinian and includes distributed compressional deformation around the tip-line of the basal detachment, originating a high at the base of the slope and the collapse of the now inactive accretionary prism of the passive margin. The initial subduction of the high at the base of the slope induced the deformation of the accretionary prism and the formation of another high in the shelf—the Shelf Transition High. The third stage, from the Early Pliocene to the present-day, includes the active compressional deformation of the shelf and the base-of-slope around the tip-line of the basal detachment, while extensional deformations are active in the outer swell of the trench.  相似文献   

20.
Submarine canyons are conduits for the distribution of sediment across continental margins. Although many canyons connect directly with fluvial or marine littoral system feeders, canyons detached from direct hinterland supply are also recognized. The fill of detached canyons remains enigmatic, because their deep‐water setting restricts analysis of their evolution and stratigraphic architecture. Therefore, this study aims to investigate the sedimentary processes that infilled deep‐water canyons and the resulting architecture. Miocene outcrops of an exhumed deep‐water system from the East Coast Basin, New Zealand, are documented and compared with the morphology and seismic scale architecture of a modern detached canyon system on the same convergent margin. The outcropping system preserves the downstream margin of a sub‐basin deposited at palaeo‐water depths >700 m. A 6 km wide by 430 m deep incision is filled by heterogeneous siliciclastic sediments, 50% of which comprise graded thin‐beds with traction structures, interpreted to result from oscillatory flows. These are intercalated with concave‐up lenses, up to 15 m thick, of sigmoidally‐bedded, amalgamated sandstones, which preserve ripple casts on bed bases, interpreted as deposits at the head of a deep‐marine canyon. Palaeo‐flow was eastward, into the sub‐basin margin. On the adjacent margin of the sub‐basin down‐dip, stacked and amalgamated sandstones and conglomerates represent the fill of a submarine channel complex, at least 3 km wide. The channels are inferred to have been fed by the up‐dip canyon, which traversed the intervening structural high; similar relationships are seen in the bathymetry data. Seismic studies on this margin demonstrate that multiple phases of canyon cut and fill may occur, with downstream architectural evolution comparable to that seen at outcrop, demonstrating that detached canyons may act as sediment conduits. Breaching of developing sea‐floor structures by detached canyons can modify tortuous sediment pathways, supplying sediment to otherwise starved areas of the slope.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号