首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Salt weathering in dual-porosity building dolostones   总被引：2，自引：0，他引：2  
The influence of rock fabric on physical weathering due to the salt crystallization of selected brecciated dolostones is discussed. These dual-porosity dolostones are representative of heterogeneous and anisotropic building rocks, and present highly complex and heterogeneous rock fabric features. The pore structure of the matrix and clasts is described in terms of porosity and pore size distribution, whereas the relative strength for each textural component is assessed using the Knoop hardness test. The whole characterisation process was carried out using the same samples as those used in the standard salt durability test (EN-12370), including connected porosity, the water saturation coefficient, fissure density, compressional wave velocity and waveform energy.

Results show the most important rock fabric elements to be considered are the matrix and clast properties and the nature of fissures. Firstly, a relatively weak matrix was the focus of major granular disintegration as it presents high porosity, low pore radius and reduced strength. Secondly, narrow micro-fissures appear to be important in the decay process due to the effectiveness of crystallization pressure generated by salt growth. On the contrary, macro-fissures do not contribute greatly to rock decay since they act as sinks to consume the high supersaturations caused by growth of large crystals. Additionally, an analysis of stress generated by crystallization was carried out based on the general situation of a lenticular crystal geometry. Finally, the relationships between whole petrophysical properties and durability were established using a principal component analysis. This analysis has clearly established that the durability of rocks affected by salt crystallization mechanisms diminishes in weaker and anisotropic rocks with high porosity and fissure density.  相似文献   


2.
Most studies dealing with material properties of sandstones are based on a small data set. The present study utilizes petrographical and petrophysical data from 22 selected sandstones and ~300 sandstones from the literature to estimate/predict the material and weathering behaviour of characteristic sandstones. Composition and fabric properties were determined from detailed thin section analyses. Statistical methods applied consist of data distributions with whisker plots and linear regression with confidence regions for the petrophysical and weathering properties. To identify similarities between individual sandstones and to define groups of specific sandstone types, principal component and cluster analyses were applied. The results confirm an interaction between the composition, depositional environment, stratigraphic association and diagenesis, which leads to a particular material behaviour of sandstones. Three different types of pore radii distributions are observed, whereby each is derived from different pore space modifications during diagenesis and is associated with specific sandstone types: (1) bimodal with a maximum in capillary and micropores, (2) unimodal unequal with a maximum in smaller capillary pores and (3) unimodal equable with a maximum in larger capillary pores. Each distribution shows specific dependencies to water absorption, salt loading and hygric dilatation. The strength–porosity relationship shows dependence on the content of unstable lithic fragments, grain contact and type of pore radii distribution, cementation and degree of alteration. Sandstones showing a maximum of capillary pores and micropores (bimodal) exhibit a distinct hygric dilatation and low salt resistance. These sandstones are highly immature sublitharenites–litharenites, characterized by altered unstable rock fragments, which show pointed-elongated grain contacts, and some pseudomatrix. Quartz arenites and sublitharenites–litharenites which are strongly compacted and cemented, show unimodal unequal pore radii distributions, low porosity, high strength and a high salt resistance. The presence of swellable clay minerals in sublitharenites–litharenites leads to a medium to high hygric dilatation, whereas quartz arenites show little hygric dilatation. Sandstones with unimodal equal pore radii distribution mostly belong to weakly compacted and cemented mature quartz arenites. These are characterized by high water absorption and high porosity, low to medium strength and a low salt resistance. The data compiled in this study are used to create a sandstone quality catalogue. Since material properties are dependent on many different parameters of influence, the transition between different lithotypes is fluent.  相似文献   

3.
The construction suitability of a dimension stone depends on its weathering properties along with the petrology and the petrophysical properties. The aim of this study was to evaluate the suitability of the dimension stones from the “Drei Gleichen” area for construction and replacement purposes. In total, six sandstones (Ingersleben, Wachsenburg, Hindfelden, Seeberg, Röhnberg, Gleichenberg; Upper Triassic) as well as two carbonates (Wachsenburg sinter; Quaternary, Wandersleben dolomite; Middle Triassic) were analysed. The results from our laboratory and on-site studies of the dimension stones show that rocks from the same stratigraphic layer, like the sandstones from the upper Triassic, can show major differences in their petrophysical and weathering properties. These differences are attributed to their different diagenesis, resulting, e.g. in varying pore space, water balance and strength properties. The pore size distribution can be divided into four different groups based on their occurring maxima and micropore content. The determined water balance properties as well as moisture expansion and salt attack depend on these groups. Next to this, the mineralogical composition significantly influences the weathering resistance. Sandstones with a high content of altered lithoclasts show a high amount of moisture expansion, low strength and, in consequence, a low weathering resistance against salt attack. Based on the results of the present study, an evaluation of construction suitability could be accomplished. From the analysed sandstones, only the Seebergen sandstone is suitable for construction purposes due to its good availability, good strength properties (high compressive and tensile strength, low softening degree) as well as a low porosity. Furthermore, the Wachsenburg sandstone also shows good petrophysical and petrological properties, but exploitable deposits are too sparse to be of commercial interest. From the carbonates, the Wachsenburg sinter shows very suitable rock parameters, but only sparse outcrops occur, which are not appropriate for mining.  相似文献   

4.
This study aims to understand the effect of salt and frost crystallisation on the petrophysical and durability properties of representative types of travertine and carbonate tufas. Results demonstrate that the studied travertines and tufas exhibit a very high durability against salt and ice crystallisation cycles, compared to carbonates rocks with similar porosity values. The variation of the loss of mass, effective porosity, capillary absorption coefficient, ultrasonic wave velocity and attenuation, and compressive strength was scarce during weathering tests. The evolution of petrophysical properties was slightly more intense after 30 cycles of salt crystallisation than 100 cycles of freeze–thaw. Petrophysical and durability properties of the travertines and carbonate tufas depend on porosity fraction and on the manner in which the vuggy porosity is connected. In the travertine facies, vuggy macropores show little connection and can be considered as separate-vug porosity. Their addition to interparticle porosity increases effective porosity and reduces their mechanical strength but does not significantly increase capillary transport and the effectiveness of salt and ice action over the stone. On the contrary, in the carbonate tufas, vugs act as touching-vug pores, as capillary imbibition coefficients reveal. However, scanning electron microscopy displays that they underwent microcracking processes related mainly to both thermal stresses and/or ice and salt pressures. These microcracks present little connection, and they do not enhance noticeably the water flow or decrease the mechanical properties. These results are finally discussed in terms of a nonlinear decay pattern, which with long periods of apparent stability might be followed by rapid and catastrophic decay.  相似文献   

5.
Weathering processes cause important changes in rock porosity. Besides porosity, distribution of pore sizes is significant for the identification of changes due to rock weathering and its effects on fabric. The formation of secondary porosity in different types of rock taken from different parts of Turkey was examined and the results are presented in this paper. The aim of this study was to observe changes in porosity due to weathering. Effective porosity, mercury intrusion porosimetry, and optical and scanning electron microscopy were used to evaluate the changes in pore geometry of the rocks. Additionally, the dry density, water absorption and uniaxial compressive strength of the rocks at different weathering stages were determined. Analysis of experimental data showed that microstructure of the rocks in relation to weathering is the main feature, which controls their physical and mechanical properties. The study revealed that fabric characteristics, particularly the pore and fracture geometry are very important characteristics for assessment of the behaviour of weathered rock.  相似文献   

6.
The old mining city of Guanajuato in middle Mexico preserves one of the most important historical legacies in colonial buildings, the UNESCO declared the city World Heritage Site in 1988. Practically all the colonial constructions were built with natural stones from the neighbourhood, of which stands a greenish to reddish vulcanite, called Loseros Tuff. Although the Loseros Tuff is widely used in historical buildings in the city. It shows significant deterioration and weathering effects, principally in the parts where the tuff shows a coarse grain size. The petrographic, petrophysical, mineralogical and geochemical properties of the Loseros Tuff were analysed in order to determine the causes, effects, behaviour and response to deterioration of this volcanic rock. The results of the investigations suggest that in addition to the parameters like the grain size and the porosity properties, the pore radii distribution is decisive for the effectiveness of porosity and the water transport into the rock. It is recognized that once the liquid water invades the rock the dissolution of the matrix occurs, which is accompanied by a sudden moisture expansion favoured by the newly formed secondary porosity and the high content of expandable clay minerals.  相似文献   

7.
The Orval Abbey, a major monument of southern Wallonia, Belgium, was partly destroyed and rebuilt several times between the Middle Ages and the present time. The oldest parts are made of natural stones of local origin (Bajocian and Sinemurian limestones) and the most recent parts are mostly made of reconstituted stone. The process of reconstituted stone making is not known. Although confronting the same environmental conditions, the reconstituted stone is much more susceptible to weathering than the natural limestones, especially to salt crystallisation. The present study compared the mineralogical and petrophysical properties of these building materials to gather information on the making of the reconstituted stone and to understand the difference in salt susceptibility between natural and reconstituted stones. Microscopic observations and petrophysical measurements showed that the reconstituted stone is composed of debris of Sinemurian and Bajocian limestone and cement, and the salt efflorescences were thenardite. Within the cement, amorphous grains were found that may correspond to grains of clinker, which have not reacted during stone making. Although its porosity and water transfer properties were close to that of the Bajocian limestone, its pore access distribution was centred around 0.1 μm. Furthermore, the details of the pore size distribution allowed calculating salt susceptibility indices that were very high in the case of the reconstituted stone. Thus, the composition of the cement and the pore size distribution are likely the two factors explaining a high susceptibility of the reconstituted stone to salt weathering.  相似文献   

8.
探讨了鄂尔多斯盆地中奥陶统马家沟组海相碳酸盐岩储集层岩石物理相特征及储集层分类方法。应用露头、岩心、薄片分析及储集层物性测试及压汞实验方法开展了碳酸盐岩储集层岩性、孔隙结构及物性研究,应用储集层流动带指标FZI开展了储集层岩石物理相特征及储集层分类方法研究。马家沟组碳酸盐岩储集层岩石类型主要为岩溶角砾泥晶—粉晶白云岩、膏盐溶蚀角砾泥晶—粉晶白云岩、含膏盐或膏盐质白云岩、粉晶—细晶白云岩、残余结构中晶—细晶及粗晶—中晶白云岩、次生灰岩、泥晶灰岩及白云岩,发育洞穴、溶洞、孔隙及裂缝4种储集空间,主要发育晶间孔型、裂缝型、裂缝—晶间孔型、裂缝—晶间孔—溶洞型4类储渗类型。依据流动带指标将储集层划分为6类岩石物理相及24类亚相,据此将储集层分为5类7亚类：一类储集层是天然气赋存的优质储集层,主要分布于马五1、马五4及马五6段;二、三类储集层是马家沟组主要储集层类型,以孔隙为主的二1、三1类储集层主要分布于马五1—马五6段,以裂缝为主的二2、三2类储集层主要分布于马四段;四类储集层物性差,见于各段;五类为非储集层。研究结果表明,基于岩石物理相的储集层研究方法是揭示碳酸盐岩储集层特征及开展储集层定量分类与评价的有效途径。  相似文献   

9.
Euganean trachyte is a subvolcanic porphyritic rock extracted in northern Italy with an age-old tradition of use as dimension stone, historically linked, in particular, to the fervent building activity brought by the Roman Empire and, later on, the Republic of Venice Serenissima. The results of a comprehensive petrophysical and mechanical characterization of Euganean trachyte from the most representative quarries are discussed here, involving the following properties: density, porosity, water absorption, capillary water uptake, hygroscopic water adsorption, hydric/hygric dilatation, water vapor diffusion, thermal expansion, and resistance to salt attack and abrasion. The different trachyte varieties, although belonging to the same quarry basin, exhibit a relatively wide array of technical performances, which are strongly dependent on pore volume, size, size distribution, shape, and degree of interconnection, controlling modes and rates of water transport and retention. Therefore, indications are provided for evaluating durability performance of the stone, with stress on water-driven weathering. Complementary information is finally given on the possible criteria followed in the antiquity for properly selecting the trachyte quarries to be exploited, and by a comparison with the properties of the most important trachytes extracted in Europe.  相似文献   

10.
Sandstones, clay in the form of bricks and laterite are the building materials used by the Khmer to construct the imposing and magnificent temples in Southeast Asia. Many of these monuments suffer from fracturing, sanding, contour scaling, crust formation and salt weathering. The affinity to weathering is closely connected to the type of material. Two sandstone types classified as feldspathic arenite and quartz arenite of Angkor as well as two arkosic sandstones from Thailand are described and investigated in this study. Important petrophysical properties determined for the different sandstones consist of hydric expansion, thermal expansion, pore radii distribution and ultrasonic velocity. Different investigations such as capillary water uptake, surface hardness, hygroscopic water sorption, and salt resistance tests were undertaken in the laboratory to characterize the various rock types. Observations and quantified damage mapping were done onsite at the Phnom Bakheng Temple. Contour scaling in the form of weathering crusts is one of the main deterioration features observable at the Angkor monuments. Comparisons are made between the building stone, the crust material from the Phnom Bakheng Temple and fresh stone material used for restoration. Significant differences in hydric and especially in thermal expansion of the crust and sandstone have been determined. The results seem to indicate that extensional processes occur, which can be considered a force for detachment (i.e., contour scaling, flaking). In an experimental trial, the hydric and thermal expansion of the weathering crust and the building stone was significantly reduced by using a weak acid for the crust and a swelling inhibitor for the original building stone.  相似文献   

11.
Salt crystallization is the most significant factor in the degradation of the natural stones used in cultural and historical structures. Stones decay partially or fully as a result of this exposure. This study is the investigation of the degradation of historical monuments (underground cities and semi-underground settlements) carved in pyroclastic rocks in Cappadocian Region which takes part in World Cultural Heritage List. Samples of pyroclastic rocks were collected from six different quarries in Cappadocia, Turkey. To understand the contribution of salt crystallization to this weathering, dry weight loss (DWL) tests were performed on these samples. To investigate the correlations between salt crystallization and other rock properties, porosity, water absorption, ultrasonic velocity, uniaxial compressive strength, Brazilian tensile strength, and point load index were also measured. During the SC process of weathering, the results showed that porosity and water absorption increased for all the samples whereas ultrasonic velocity, uniaxial compressive strength, tensile strength, and point load index values decreased. Evaluation of the data obtained from these tests showed very high logarithmic correlations between the dry weight loss values and the mechanical properties.  相似文献   

12.
严绍军  方云  刘俊红  谭松娥 《岩土力学》2013,34(12):3410-3416
可溶盐富集是造成山西大同云冈石窟砂岩表面风化、结构破坏及强度降低的重要地质病害之一。采取云冈石窟造像层砂岩,使用芒硝对该砂岩进行了劣化模拟试验。在可溶盐反复结晶过程中,对样品进行实时变形监测,并对循环过程中质量衰减、强度变化、孔隙分布等进行测试与分析。结果表明,可溶盐的发育是导致石窟表面粉化脱落的重要因素,严重降低了石窟文物本体的价值;可溶盐结晶导致岩石颗粒间胶结作用破坏,增大岩石孔隙率,岩石内部结构劣化严重影响岩石的刚度与强度等力学参数;对比无水芒硝与10水芒硝两种劣化试验,云冈石窟在相对干燥季节下,可溶盐晶体发育对岩石破坏更为显著。为了预测砂岩长期劣化过程,在试验数据基础上,初步建立起孔隙增长的对数模型和强度衰减的指数模型。  相似文献   

13.
Carbonate rocks can be classified in terms of those properties relating to the pore system of lithified sediments, so‐called ‘petrophysical rock types’, or ‘depositional rock types’ which are categorized based on characteristics directly reflecting their original depositional environment. Whereas petrophysical rock types are typically used to identify and distribute rock bodies within a reservoir with similar flow characteristics, depositional rock types ignore pore types and capture sedimentary structures, lithology and fossils. Both classification systems are extensively used to describe reservoir rocks, but the degree of plurality between them remains poorly understood and is the motivation for this study. To examine the degree of congruency between the two classification schemes, a field assessment was conducted for a 175 km2 area situated offshore Al Ruwais, northern Qatar, encompassing depositional environments spanning supratidal, intertidal, shallow subtidal and open marine conditions. A total of 350 surficial sediment samples were collected along 24 shore‐normal transects. Each sample was assigned a ‘petrophysical rock type’ class based on analysis of sedimentary texture (grain size and sorting). ‘Depositional rock type’ classes, by contrast, were defined with reference to faunal content and, in turn, classes of mineralogy were delimited by weighting this content against the mineralogy of each faunal category. Of course, the samples studied correspond to unconsolidated sediments and not to indurated rocks. However, considering only primary porosity and permeability preservation, it is reasonable to assume that the classified sediments would become petrophysical rock types and depositional rock types when consolidated, following their primary grain size, sorting and grain type distribution. Therefore, the term ‘rock type’ is retained here for ease of terminology but, for clarity, these are sediment samples. The discrete samples were interpolated into continuous surfaces describing the distribution of depositional rock types, petrophysical rock types and mineralogy, and spatial correspondence between those surfaces was statistically evaluated. In order to link these parameters with environment of deposition, their correlation with water depth (as audited from airborne light detection and ranging) and ecological habitat (mapped from DigitalGlobe satellite imagery) was also assessed. The data reveal that spatial distributions of sedimentary faunal, petrographic and mineralogical properties do not show exactly congruent patterns. Other meaningful trends do exist, however. For example, the occurrence of certain depositional rock types is indicative of particular petrophysical rock types, and vice versa. Further, connections between petrophysical rock types and mineralogy are emphasized and offer insight as to how the evolution of matrix porosity might be predicted via diagenetic models tuned to specific sediment textures. Useful relationships are also identified between the occurrence of petrophysical rock types and depositional rock types, and both ecological habitat and water depth. The potential of such dualities is two‐fold. Firstly, they can be applied to more realistically distribute petrophysical rock types and depositional rock types by environment of deposition in reservoir models and, secondly, the use of modern carbonate systems as subsurface analogues might be enhanced.  相似文献   

14.
The degree of weathering in natural stones on buildings and sculptures has been determined for many years in numerous cases by means of ultrasonic measurements. Conclusions concerning the strength of the rock and the type of weathering can thus be drawn. This relationship has not been established for all rock types. Most of the progress utilizing this method has been made in the analysis of marbles, where an increasing degree of weathering shows lower ultrasonic velocities. In the present study, four Carrara marble samples showing similar rock fabrics, but with respect to weathering exhibit considerable differences are investigated. Porosity varies between 0.2 vol. % and ca. 2.4 vol. %, whereby with increasing porosity the pore radii changes as well. Parallel to this the ultrasonic velocities change in dry samples from about 5.5 to 1.6 km/s, respectively. Model calculations reveal that the velocity reduction is caused by cracks with an extremely small aspect ratio of about 0.005 or even less. After a specific loss of strength, however, solution processes can become active, which modify the microcracks and generate an opposite trend. In the process a strong porosity increase correlates to a relatively small velocity reduction. With the presence of water the V p porosity weathering relationship experiences a considerable modification. Parallel to the reduction of the ultrasonic velocities, it was determined that the mechanical strength (compressive strength, flexural strength, etc.) as well as the static Young’s modulus is reduced almost equally by a progressive advancement of the weathering front. In one case study dealing with tensile strengths, it was clearly documented how tensile cracks develop and propagate in dependence of the rock fabric. The rock mechanical and ultrasonic velocity data were used for stability assessments applied to the marble statuaries from the Schlossbrücke in Berlin. Stability assessments of the sculpture group 4 reveal that some critical parts must be replaced due to safety reasons.  相似文献   

15.
Quaternary alkaline basalts of Middle Atlas, are weathered into spheroidal volumes organized into weathering cover. In the profile studied, the study of transformations from a fresh core basalt to the most weathered rinds, has been analysed using BESI images (backscattred electron image analysis). A part from the microscopic analysis of each weatherted basalt, proportions of primary minerals, clays and pore space has been quantified in different stages of weathering. Indeed, in fresh core basalt, weathering is characterized by a first dissolution of the glass, followed by feldspar transformations in twinning plans, cleavages and in micropores inherited from the magmatic and cristallographic history of the rock.

In most basaltic weathered rinds, pore spaces given by the dissolution of the glass, were filled by a mixture of clays and iron products. In these samples, feldspars are completely dissolved giving important porosity occupied by small quantity of halloysite and kaolinite. The olivine and pyroxene transformations are accompanied by weak pore space formation. At the bottom of the soil, this porosity decreases in response to filling by later secondary products which come from the upper part of the soil by weathering solutions.  相似文献   


16.
红色粉砂质泥岩和泥质粉砂岩是巴东组特殊性岩土的代表,具有遇水易崩解特性。根据岩样单轴压缩试验,基于PFC2D程序,建立中硬岩、软岩单轴压缩试验数值模型;模型选用平行黏结颗粒接触模型。根据应力-应变曲线特征,采用分段定量参数标定法对软岩试样的细观参数进行标定;且通过调整法向和切向黏结强度比值σc/τc,控制试样单轴压缩破坏模式;分别对不同风化程度的粉砂质泥岩和泥质粉砂岩在饱和、天然状态下单轴压缩试验过程进行模拟;并分析了试验过程中颗粒法向接触力、切向接触力、配位数、孔隙度等细观组构参数的分布特征和演化规律。研究结果表明:该数值方法能够很好地模拟中硬岩、软岩的单轴压缩试验过程,除中风化粉砂质泥岩外,风化程度和浸水条件仅能影响试样颗粒接触力在统计角度范围的大小,不能影响其分布形式;同时,风化程度和浸水条件延长了配位数显著下降的加载时间,配位数随裂缝数量的增加而减小;浸水条件和风化程度对泥质粉砂岩的孔隙度演化影响较大;风化程度对粉砂质泥岩孔隙度演化影响较大,而浸水条件影响较小。   相似文献   

17.
Sandstone degradation: an experimental study of accelerated weathering   总被引：2，自引：0，他引：2  
The investigated rock material belongs to the group of upper cretaceous quader sandstones which are very important construction stones in Poland and Germany. The mineral composition of the rocks is relatively uniform??they are quartzose sandstones. The most important feature is their good workability and comparatively high weathering resistance. Still, regardless of the apparent resemblance, the observations carried on buildings and monuments show differences in weathering processes. The undertaken test was an attempt to verify the proposed before rock classification, performed on the basis of parameterization of porosimetric cumulative intrusion volume curves. The aim of the experiment was the evaluation of the sandstone petrography (including the structure, texture and porosity of the rock) influence on the weathering process. The modelling of accelerated weathering was conducted in Chamber for Ageing Acceleration, where some weather circumstances were simulated (insolation, rain and frost). As the result of the weathering experiment it could be stated that the dominant mechanism of the sandstones deterioration was granular disintegration and weight loss as a consequence of sample destruction. The most important factor influencing rock deterioration is rock texture, especially the character of grain contacts. The effective porosity is a requisite of potential for the stone to take in and hold water, and hence of resistance to weathering. In case of silica-cemented sandstones, the deciding criterion influencing weathering resistance is pore structure. In case of sandstones with clay cement, the most important is mineral composition of the rock.  相似文献   

18.
周翔  何生  刘萍  俱云娟 《地学前缘》2016,23(3):253-265
利用取心井铸体薄片、扫描电镜、X衍射、压汞测试等分析化验资料,在系统研究鄂尔多斯盆地代家坪地区长6致密油储层微观孔隙结构特征、成因机理的基础上对其进行分类评价。结果表明长6储层储集空间以粒内溶孔、残余粒间孔为主,次为粒间溶孔、岩屑溶孔,喉道类型以片状、弯片状和缩颈型喉道为主。沉积作用形成的岩石组构和成分差异决定了储层原始孔渗条件,并影响到后期成岩作用的类型和强度;各成岩事件对物性影响定量计算表明,强烈的压实和碳酸盐胶结是造成储层原生孔隙结构被破坏的主要原因;构造挤压则加剧了孔隙结构的非均质性;结合盆地埋藏史将孔隙演化分为浅埋藏胶结减孔带、中埋藏压实减孔带、深埋藏溶蚀增孔带和深埋藏胶结减孔带等4个阶段。通过微观孔喉结构参数与储层宏观物性相关性分析,优选最大连通喉道半径、主要流动喉道半径、分选系数、排驱压力和中值压力等5个孔隙结构参数作为分类依据;进一步采用Q型聚类分析将长6储层分为4种类型,结果表明Ⅰ、Ⅱ类储层孔隙结构较好,为研究区有利开发目标区。  相似文献   

19.
Precipitation of salts in confined spaces is the key mechanism for rock weathering and damage to building materials. To date there is no comprehensive study of the parameters influencing the reduction of pore space by salt crystals and the consequences for transport and damage by crystallization pressure. A novel method is presented to quantify pore clogging (i.e., the degree to which crystallization of salts interferes with transport of solution in porous materials). After drying capillary-saturated stone specimens containing salt solutions, the rate of capillary uptake of decane into the salt-contaminated specimens is measured. By treating the salt-contaminated material as a bilayer, the width of the crystallization front and the degree of pore filling can be determined. Two model materials with different pore size distributions (Indiana and Highmoor limestone) and three salts (sodium chloride, sodium sulfate and magnesium sulfate) are selected for this study. It is shown that pore clogging results from the interplay between pore size distribution and salt properties. Different scenarios are discussed to link pore clogging with salt damage.  相似文献   

20.
高温后花岗岩力学性质及微孔隙结构特征研究   总被引：3，自引：1，他引：2  
徐小丽  高峰  沈晓明  金春花 《岩土力学》2010,31(6):1752-1758
采用MTS815液压伺服试验系统及9310型微孔结构分析仪对花岗岩在温度作用下（常温～1 300 ℃）的宏观力学性质及微孔隙结构特征进行了较为系统的研究。结果表明：①在800 ℃之前,岩样力学性质变化规律不明显;超过800 ℃,岩样强度迅速劣化;达到1 200 ℃,岩样基本失去了承载能力。②岩样孔隙率随温度升高而增大,孔隙率的阀值温度在800 ℃左右,与岩样在该温度点强度突然降低相一致。③岩样孔隙率较小,但连通性好,在阶段进汞曲线上显示为不同宽度微裂隙并存的特征,累计进汞曲线呈台阶状,温度超过800 ℃,超微孔逐渐向微孔隙转化,岩样连通性增强。④岩样孔隙分布分形维数随温度的升高反而降低。在高温作用下,岩样中的热损伤由初始非规则的裂隙结构逐渐向均匀化的孔穴结构转化,非均匀性弱化是导致岩样孔隙分布分形维数降低的根本原因。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号